Pasar al contenido principal

DISEÑO OPTIMO E INTEGRACION DE PLANTAS DE POTENCIA CON PILAS DE COMBUSTIBLE DE TIPO PEM PARA VEHICULOS ELECTRICOS AUTONOMOS O TRIPULADOS DE FORMA REMOTA

RTI2018-096001-B-C31

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Single cell induced starvation in a high temperature proton exchange membrane fuel cell stack

  • Alegre Gresa, Cinthia
  • Lozano Fantoba, Antonio
  • Pérez Manso, Ángel
  • Álvarez Manuel, Laura
  • Fernández Marzo, Florencio
  • Barreras Toledo, Félix
This manuscript version is made available under the CC-BY-NC-ND 4.0 license https://creativecommons.org/licenses/by-nc-nd/4.0, Fuel and oxidant starvation are amongst the most critical phenomena affecting fuel cell durability. Reactant starvation during proton exchange membrane fuel cell operation can cause serious irreversible damages. In the present research, the effect of a selective induced starvation of reactant gases on the performance and degradation of a high-temperature PEM fuel cell is studied. A specifically designed 5-cell stack is used, which enables varying the gas supplied to any of the individual cells. The particularity of selectively starving only one cell in a controlled manner is one of the novelties of this study. Two different tests are performed actuating on the central cell (cell 3). They are denoted as moderate and severe starvation, depending on the intensity of the limitation imposed to the gases flowrate. Some relevant and novel results are obtained. It is verified that the performance degradation caused by a moderate starvation of the reactant gases in a cell is reversible. On the contrary, the damages caused by an aggressive gas starvation, which is also maintained in time (30 min), are irreversible. However, the behavior of the rest of the cells is barely affected by the gas starvation to cell 3. Thus, the other major novelty of the present work is the evidence/proof of the ability of a stack with a starved and highly degraded cell, to continue operating, although with a drastic reduction in the total generated current., Authors acknowledge the financial support of the Secretariat of State for Research of the Spanish Ministry of Economy and Competitiveness under project DPI2015-69286-C3-1-R, and the Spanish Ministry of Science, Innovation and Universities under the project RTI2018-096001-B-C31. Support of the Regional Government of Aragon to the Fluid Mechanics for a Clean Energy Research Group (T01_17R) of the LIFTEC is also acknowledged. C. Alegre acknowledges the support of MINECO for her Juan de la Cierva contract and L. Álvarez-Manuel acknowledges the funding provided by the European Social Fund and CSIC under the Youth Employment Initiative., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Evaluation of the corrosion resistance of Ni(P)Cr coatings for bipolar plates by electrochemical impedance spectroscopy

  • Marzo, F. F.
  • Alberro, M.
  • Manso, A. P.
  • Garikano, X.
  • Alegre Gresa, Cinthia
  • Montiel, Manuel
  • Lozano Fantoba, Antonio
  • Barreras Toledo, Félix
In the present research, the corrosion resistance of Ni–P and Ni–P–Cr coatings on AA7075-T6 aluminum plates under simulated anodic and cathodic conditions of polymer electrolyte membrane fuel cells (PEMFC) has been studied by electrochemical impedance spectroscopy (EIS). Three Ni–P coatings 20 μm, 30 μm, and 40 μm thick applied by electroless deposition were tested. Besides, a two-layer Ni–P–Cr coating 30 μm thick was also analyzed. It was formed by an inner Ni–P layer, and an outer 10 μm thick chromium one added by electroplating. Corrosion tests were combined with interfacial contact resistance (ICR), roughness, contact angle, and SEM-EDX measurements. The best results were obtained for the 20 μm Ni–P and the two-layer Ni–P–Cr coatings, although the latter showed a high ICR value due to the high electrical resistivity of the chromium oxide surface formed. It was verified that coating degradation occurs when the electrolyte penetrates the micro-cracks and the nodular surface interfaces, reaching the base metal and causing the coating delamination. This behavior is associated with a sharp decrease in the polarization resistance (Rp) of the equivalent circuit model fitted to the EIS results., Authors acknowledge the financial support of the Secretariat of State for Research of the Spanish Ministry of Economy and Competitiveness under project DPI2015-69286-C3-1-R, and the Spanish Ministry of Science, Innovation and Universities under the project RTI2018-096001-B-C31. Support of the Regional Government of Aragon to the Fluid Mechanics for a Clean Energy Research Group (T01_17R) of the LIFTEC is also acknowledged, as well as the technical and human support of the Materials and Surfaces Service provided by SGIker (UPV/EHU/ERDF, EU).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Vanadium Redox Flow Battery State of Charge Estimation Using a Concentration Model and a Sliding Mode Observer

  • Clemente, Alejandro
  • Montiel, Manuel
  • Barreras Toledo, Félix
  • Lozano Fantoba, Antonio
  • Costa Castelló, Ramon
Vanadium redox flow batteries are very promising technologies for large-scale, inter-seasonal energy storage. Tuning models from experimental data and estimating the state of charge is an important challenge for this type of devices. This work proposes a non-linear lumped parameter concentration model to describe the state of charge that differentiates the species concentrations in the different system components and allows to compute the effect of the most relevant over-potentials. Additionally, a scheme, based on the particle swarm global optimization methodology, to tune the model taking into account real experiments is proposed and validated. Finally, a novel state of charge estimation algorithm is proposed and validated. This algorithm uses a simplified version of previous models and a sliding mode control feedback law. All developments are analytically formulated and formally validated. Additionally, they have been experimentally validated in a home-made single vanadium redox flow battery cell. Proposed methods offer a constructive methodology to improve previous results in this field., This work was supported in part by the Spanish National Research Council Consejo Superior de Investigaciones Científicas (CSIC) under Project PIE-201980E101, in part by the Spanish Ministry of Science and Innovation through the Project DOVELAR (Ministerio de Ciencias yUniversidades (MCIU)/Agencia Estatal de Investigación (AEI)/Fondo Europeo de Desarrollo Regional (FEDER), Unión Europea (UE) under Grant RTI2018-096001-B-C31 and Grant RTI2018-096001-B-C32, in part by the Laboratorio de Investigación en Fluidodinámica y Tecnologías de la Combustión (LIFTEC) Research Team through the Aragon Government under Project LMP246_18, and to the group T01_20R, in part by the Universidad Politécnica de Cataluña (UPC) Research Team through the María de Maeztu Seal of Excellence to Instituto de Robótica e Informática (IRI) under Grant MDM-2016-0656, and in part by the Generalitat de Catalunya under Project 2017 SGR482.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Parameter characterization of HTPEMFC using numerical simulation and genetic algorithms

  • Losantos Viñuales, Raúl
  • Montiel, Manuel
  • Mustata, Radu
  • Zorrilla, Fernando
  • Valiño García, Luis
9 figures, 6 tables., This paper develops a novel approach to the parameterisation of high temperature exchange membrane fuel cells (HTPEMFC) with limited and non-invasive measurements. The proposed method allows an effective identification of electrochemical parameters for three-dimensional fuel cell models by combining computational simulation tools and genetic algorithms. To avoid each evaluation undertaken by the optimisation method involving a complete computational simulation of the 3D model, a strategy has been designed that, thanks to an iterative process, makes it possible to decouple the fluid dynamic resolution from the electrochemistry one. Two electrochemical models have been incorporated into these tools to describe the behaviour of the catalyst layer, Butler-Volmer and spherical aggregate. For each one, a case study has been carried out to validate the results by comparing them with empirical data in the first model and with data generated by numerical simulation in the second. Results show that, from a set of measured operating conditions, it is possible to identify a unique set of electrochemical parameters that fits the 3D model to the target polarisation curve. The extension of this framework can be used to systematically estimate any model parameter in order to reduce the uncertainty in 3D simulation predictions., The authors would like to acknowledge the financial support provided by the Spanish Ministry of Science and Innovation under the project DOVELAR (ref.: RTI2018-096001-B-C31) and to the Aragon Government under the project LMP246_18. Support of the Regional Government of Aragon to the Fluid Mechanics for a Clean Energy Research Group (T01_20R) of the LIFTEC is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Corrosion behavior of tantalum coatings on AISI 316L stainless steel substrate for bipolar plates of PEM fuel cells

  • Manso, A. P.
  • Marzo, F. F.
  • Garikano, X.
  • Alegre Gresa, Cinthia
  • Lozano Fantoba, Antonio
  • Barreras Toledo, Félix
12 figures, 1 table.-- Supplementary information available., Corrosion resistance of tantalum coatings 30 μm thick deposited by chemical vapor deposition on SS316L coupons has been evaluated by electrochemical impedance spectroscopy (EIS). To this end, anodic and cathodic operating conditions of proton exchange membrane fuel cells (PEMFC) have been simulated in a three-electrode heated corrosion cell. Interfacial contact resistance (ICR), contact angle and durability tests have been performed in long-term tests (>100 h) polarizing the electrode to 1.193 V vs. Ag/AgCl. Results obtained by different experimental techniques show a dense coating structure with a high polarization resistance, mainly formed by surface crystals of α-Ta (bcc), TaO and carbon. An atomic ratio (in %) of oxide to metallic species (Ta/Ta) of 4.8 was verified from XPS spectra, which is slightly increased to 6.23 after the anodizing treatment. The modified surface composition yielded a coating capacity higher than the amorphous oxide, favoring the in-plane electrical conduction. After the treatment, no noticeable changes were observed neither in surface morphology nor in contact angle (>90°). ICR values in the range of 22.3–32.6 mΩ cm were obtained for a clamping pressure of 140 N cm. No morphological changes or loss of coating adherence were observed during the long-term tests., Authors acknowledge the financial support of the Secretariat of State for Research of the Spanish Ministry of Economy and Competitiveness under project DPI2015-69286-C3-1-R, and the Spanish Ministry of Science, Innovation and Universities under the project RTI2018-096001-B-C31. Support of the Regional Government of Aragon to the Fluid Mechanics for a Clean Energy Research Group (T01_17R) of the LIFTEC is also acknowledged, as well as the technical and human support of the Materials and Surfaces Service provided by SGIker (UPV/EHU/ERDF, EU)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modeling degradation mechanisms of a platinum based catalyst layer in a HT-PEMFC: A 3D numerical study

  • Raga, Cristina
  • Montiel, Manuel
  • Losantos Viñuales, Raúl
  • Mustata, Radu
  • Valiño García, Luis
12 figures, 7 tables., This paper presents a comprehensive numerical investigation into the degradation mechanisms of High-Temperature Proton Exchange Membrane Fuel Cells (HT-PEMFCs) with a particular focus on catalyst layer degradation. The study integrates advanced models to accurately describe the electrochemistry of platinum and carbon oxidations, crucial processes influencing the cell’s performance over time. Additionally, a heuristic model is employed to account for the loss of proton conductivity in the membrane attributed to the depletion of phosphoric acid. The degradation processes are seamlessly integrated into a 3D computational code. By utilizing optimized values for the electrochemical parameters, the numerical simulations demonstrate excellent agreement with experimental degradation observed in an HT-PEMFC operating under steady-state conditions. In addition, the numerical approach offers insights that are not easy to achieve by experimental means, such as the equilibrium of the different oxidation states of platinum and carbon., The authors would like to acknowledge the financial support provided by the Spanish Ministry of Science and Innovation under projects DOVELAR (ref.: RTI2018-096001-B-C31) and MAFALDA (ref.: PID2021-126001OB-C32), and to the Aragon Government under the projects LMP246_18 and T06_23R. This research has been developed within the CSIC Interdisciplinary Thematic Platform (PTI+) Transición Energética Sostenible+ (PTI-TRANSENER+) as part of the CSIC program for the Spanish Recovery, Transformation and Resilience Plan funded by the Recovery and Resilience Facility of the European Union , established by the Regulation (EU) 2020/2024., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Impact of electrolyte composition on the mitigation of electrolyte imbalance in a vanadium redox flow battery: A 3D multiphysics model

  • Zorrilla, Fernando
  • Montiel, Manuel
  • Mustata, Radu
  • Losantos Viñuales, Raúl
  • Valiño García, Luis
9 figures, 10 tables., In this work an all-vanadium redox flow battery 3D model is developed to study the crossover phenomena causing electrolyte imbalance in an perpendicularly assembled battery. Fluid flow is fully modeled including transition from porous media to non-porous zones coupling the Navier–Stokes equations with the Brinkman corrections. General conservation laws are applied to model the electrochemistry in the electrolyte and electrochemical equilibrium is used to model Donnan effect at the membrane-electrolyte interface. Exclusion of the co-ions in the membrane is carefully modeled leading to a novel treatment of the sulfuric acid dissociated species in this domain. The impact of different proton and vanadium concentrations in the battery half-cells is studied in detail showing a potential way to reduce electrolyte imbalance., This research has been developed within the CSIC Interdisciplinary Thematic Platform (PTI+) Transición Energética Sostenible+ (PTI-TRANSENER+) as part of the CSIC program for the Spanish Recovery, Transformation and Resilience Plan funded by the Recovery and Resilience Facility of the European Union, Spain, established by the Regulation (EU) 2020/2094. The authors would like also to acknowledge the financial support provided by CSIC, Spain under the Special Intramural Project (ref.: PIE-201980E101), to the Spanish Ministry of Science and Innovation, Spain under projects DOVELAR (ref.: RTI2018-096001-B-C31) and MAFALDA (ref.: PID2021-126001OB-C32), and to the Aragon Government, Spain under the project LMP246_18., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Parameter characterization of HTPEMFC using numerical simulation and genetic algorithms

  • Losantos R.
  • Montiel M.
  • Mustata R.
  • Zorrilla F.
  • Valiño L.
This paper develops a novel approach to the parameterisation of high temperature exchange membrane fuel cells (HTPEMFC) with limited and non-invasive measurements. The proposed method allows an effective identification of electrochemical parameters for three-dimensional fuel cell models by combining computational simulation tools and genetic algorithms. To avoid each evaluation undertaken by the optimisation method involving a complete computational simulation of the 3D model, a strategy has been designed that, thanks to an iterative process, makes it possible to decouple the fluid dynamic resolution from the electrochemistry one. Two electrochemical models have been incorporated into these tools to describe the behaviour of the catalyst layer, Butler-Volmer and spherical aggregate. For each one, a case study has been carried out to validate the results by comparing them with empirical data in the first model and with data generated by numerical simulation in the second. Results show that, from a set of measured operating conditions, it is possible to identify a unique set of electrochemical parameters that fits the 3D model to the target polarisation curve. The extension of this framework can be used to systematically estimate any model parameter in order to reduce the uncertainty in 3D simulation predictions. © 2021 The Author(s)