Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 84
Encontrada(s) 1 página(s)

Docta Complutense
Publicación Contribución de congreso (ConferenceOutput)

Abordaje de las úlceras venosas de pacientes incluidos en un ensayo clínico

  • Herraiz Ahijado, Borja Jesús
  • Folguera Álvarez, María Del Carmen
  • Mori Vara, Pilar
  • Rodriguez Vegue, Mónica
  • Lopez Sanchez, Rocio
  • Muñoz Caballero, Eva Rocio
  • Navarro Mallén, Beatriz
  • Hita Urias, María José
  • Peláez Raposo, Belen
Describe el abordaje de las úlceras venosas de pacientes incluidos en ensayo clínico aleatorio, cuyo objetivo es evaluar la efectividad de una intervención educativa estructurada en ejercicio físico como tratamiento coadyuvante del tratamiento habitual, en la cicatrización de las úlceras venosas en atención primaria. Comunicación oral.
RIUMA. Repositorio Institucional de la Universidad de Málaga
Publicación Contribución de congreso (ConferenceOutput)

Suffixes in Competition: The Alternative -our/-or in English

  • Pacheco-Franco, Marta
Linguistic competition is the phenomenon in which at least two synonymous forms contend for a specific distributional domain. In the history of the English language, countless patterns and structures have undergone competition, often resulting either in the specialisation of one variant or in its ultimate extinction (Aronoff 2019, 41-2). The push towards standardisation in Early Modern English (henceforth EModE) made it a crucial stage for this (Nevalainen 2006). Among many other developments, the period saw the struggle between the derivational suffixes -our and -or, which would conclude with the re-arrangement of the morphological and the orthographic paradigms (Pacheco-Franco and Calle-Martín, forthcoming). In consequence, there exist in Present-day English two distinct spellings for words like honour or labour: the one hereby adopted is characteristic of British English (henceforth BrE) and the other, honor and labour is representative of American English (AmE) (OED s.v. -our, -or, suffixes). However, the disparities that exist between contemporary orthography and that from EModE indicate that the process of linguistic competition was not a straightforward one, since phenomena such as lexicalisation or blocking took a strong hold of the language. In turn, the present paper aims to outline the historical development of the pair -our/-or from their origins in Late Middle English until the end of competition. Nonetheless, there arise several issues in this endeavour. The status of English as a global language entails that enquiry into linguistic change include other varieties, whether they be of the inner, the outer or of the expanding circles. Research on the spelling preferences of Canadian English, for example, continues pointing to competition as an ongoing phenomenon due to the growth in the use of the American variant, -or (Pratt 1993). In the expanding circle, Gonçalves et al. hold Americanisation responsible for the overwhelming inclination towards the simplified form worldwide (2018, 12). It thus seems that the American spelling is gaining ground on its British counterpart. Nevertheless, the outer circle varieties, which have traditionally concurred with the norms of BrE, remain unstudied as of today. As such, this paper also attempts to analyse the occurrences of the orthographic variants in Present-day English to determine whether competition did ever conclude. The conclusions will show that, indeed, this process continues to be alive and that usage seems to be leaning towards the orthography of AmE. The paper thus aims to present a corpus-driven analysis on the distribution of the spelling variants -our and -or from a diachronic and a diatopic perspectives. The data for the first was mainly drawn from the Early English Books Online Corpus (Davies 2017), which contemplates the period 1470-1690. The source material for the second comes from the corpus of Global Web-Based English (Davies 2013), which contains data from twenty distinct varieties and out of which fourteen were selected., Ministerio de Universidades
RIUMA. Repositorio Institucional de la Universidad de Málaga
Publicación Contribución de congreso (ConferenceOutput)

Spelling variation in inner-circle Englishes

  • Pacheco-Franco, Marta
Despite the variation found in Present-day English, its spelling system continues to be described as showing polarisation between British English and American English, both in academic (Gramley et al. 2021; Baker 2017; Peters 2004, 2007; Huddleston and Pullum 2003) and non-academic sources (see among others English Club n.d.; Mondly n.d.; Confused Words n.d.). Underlying this dichotomy is the assumption that the remaining World Englishes will follow either one written standard or the other, which also includes inner-circle varieties. Although these have mostly reached endonormative stabilisation along Schneider’s (2007) cycle, external norms continue to govern the spelling of Australian, Canadian, Irish and New Zealand Englishes. Their shared historical pasts and their persisting cultural links with the United Kingdom suggests that these varieties ought to follow BrE spelling norms, with anecdotal occurrences of AmE forms (Melchers and Shaw 2011; Trudgill and Hannah 2008). However, recent studies on the overall Americanisation of English seem to raise some questions on the reality of orthography today. How do spelling variants distribute in the inner circle varieties? What does their distributional patterns signify? The present paper aims to answer these questions by means of a corpus-based investigation that will analyse the spelling of the inner-circle varieties. In order to do so, the study will draw on the distribution of the three spelling variants that best represent the tensions between British and American English orthographic norms: namely, -our/-or as in colour, -re/-er as in theatre and -isation/-ization as in realisation. The source material comes from the Global Web-based English or GloWbE corpus (Davies 2013), which contains 1.9 billion words of text produced on the internet for twenty different varieties of English. These features make the corpus an excellent resource for the diatopic analysis of English language use online. The data will be gathered from the Global Web-based English or GloWbE corpus in a three-staged process, which involves (1) retrieving the complete lists of occurrences with either spelling variant, (2) selecting the input for the study and (3) gathering the quantitative data, a total of 1,980,565 tokens. The analysis so far has shown that, although the British variants remain dominant in most varieties, the American forms seem to be playing an important role in Canadian and Australian Englishes. On the one hand, Canadian English spelling is on the way to becoming an amalgam of British and American forms, which seems to illustrate the country’s own liminality. On the other hand, Australian English spelling remains conservative. However, some American forms have been assimilated into the variety so as to convey some distinct meanings., Ministerio de Universidades
RIUMA. Repositorio Institucional de la Universidad de Málaga
Publicación Contribución de congreso (ConferenceOutput)

Usage or precept? A Study on the Spelling Variants -ise/-ize in Modern English

  • Pacheco-Franco, Marta
  • Calle-Martín, Javier
English has historically been characterised by the variability of its orthographic system. This lack of standardisation seems to contrast the very nature of writing: its prelavence in time needs for fixedness and stability (Cook 2004). However, the first orthographic standard in English would not come until the mid-seventeenth century in public writing and until the early eighteenth century in the private sphere (Nevalainen 2006). At any rate, the fact that standardisation overcame the language during the Early Modern period is not fortuitous. Indeed, the process coincided with the spread of printing and the imminent rise of prescriptivism in England, which would become major agents of change in the language (Scragg 1975; Nevalainen 2006). Their influence would be critical not only in extending the reach of literacy among speakers, but also in selecting and codifying (one the) many variants available (Mirloy & Milroy 2012). The success of the standardisation process is manifest in Present-day English (henceforth PDE) orthography, which is one the linguistic levels with the highest degree of standardisation in the language. Nevertheless, standardisation was not all-encompassing seeing that English continues to present orthographic variation today. Words like colour, theatre and organise present two distinct orthographic renderings in PDE: the ones hereby adopted are often described as representative of British English, and the others ‒color, theater and organize‒ as typical of American English (Gramley et al. 2021). However, these cases of spelling variation are not recent innovations; their origins date back to the Early Modern period (Calle-Martín 2021). The question that arises at this point is how or why these forms escaped standardisation. Since the impact of prescriptivism on the standardisation of these spelling variants remains unexamined, the present paper aims to assess its role by means of a corpus-based study. The investigation will focus on the historical development of the -ise/-ize spelling variants in the Early and Late Modern periods in two different dimensions. On the one hand, the Early English Books Online and the Corpus of Late Modern English Texts corpora will provide insight into their distribution in usage. On the other hand, a precept corpus containing historical dictionaries, grammars and spelling guides will shed some light on prescriptive norms. Studying these two dataset combined will show whether the configuration of the spelling variants today answers to usage or to precept., Ministerio de Universidades
RIUMA. Repositorio Institucional de la Universidad de Málaga
Publicación Contribución de congreso (ConferenceOutput)

Standard, Variation, and Change: Sociolinguistic Insights into Late Modern English Spelling

  • Pacheco-Franco, Marta
In this talk I present a corpus-based approach to the study of the spelling variation in words like colour, theatre and licence from a diachronic perspective. The analysis hinges on two processes of linguistic change that these words have undergone over time and are experiencing across varieties today: namely, standardisation and differentiation. The talk thus highlights that spelling is neither arbitrary nor dependent on speech. Instead, it is shaped after social, cultural and political factors, thus making it as much as sociolinguistic product as any other linguistic level., Ministerio de Universidades
RIUMA. Repositorio Institucional de la Universidad de Málaga
Publicación Contribución de congreso (ConferenceOutput)

Assessing prescriptivism: on the standardisation of the orthographic variants our/ or, er/ re and ce/ se in Modern English

  • Pacheco-Franco, Marta
Orthography is the linguistic level with the highest degree of standardisation in English. Such development is often attributed to the very nature of writing: its prevalence in time needs for fixedness and stability (Cook, 2004). The phenomenon, however, did not just overcome spelling. Rather, the standardisation of English orthography was a long due process which climaxed by 1650 (Nevalainen, 2006).1 That this process should concur with the rise of printing and, most importantly, with the imminent spread of prescriptivism in England is no coincidence. Indeed, prescriptivism played an important role in the process of standardisation, its influence in the selection and codification stages (cf. Milroy & Milroy, 1999) being decisive for the final configuration of the English spelling system. Because its impact on the creation of a standard has not been properly assessed, the present paper aims to measure the role played by prescriptivism in the arrangement of the orthographic system during the Early and Late Modern periods. The linguistic items under study will correspond to the orthographic variants that still exist in Present day English, exemplified by colour/color, theatre/theater and deffence/deffense. These have been chosen in light of their persisting orthographic variation and of their unsystematic distribution (Huddleston and Pullum, 2002). The data for the study will be drawn mainly from the Early English Books Online corpus and the Corpus of Historical American English. Finally, the quantitative results will be analysed against a precept corpus - as suggested in Auer (2012) - to enable the aforementioned assessment., Ministerio de Universidades
RIUMA. Repositorio Institucional de la Universidad de Málaga
Publicación Contribución de congreso (ConferenceOutput)

‘In long lif and helth with moche honour’: The Alternative -our/-or in Mediaeval Correspondence

  • Pacheco-Franco, Marta
The orthographic variants honour and honor coexist in Present-day English differentiated on the grounds of diatopic variation, each characterising British and American English, respectively (Peters 2004, 511). The standardisation of these forms was, from a historical viewpoint, straightforward. Although -our and -or concurred for most of the Early Modern period, they never showed any signs of competition in British English, with the former remaining dominant all throughout (Pacheco-Franco & Calle-Martín 2020, 174). By the turn of the 19th century, -or would return to the fore by the hand of lexicographer Noah Webster, who overtly promoted this spelling in his endeavour to create a distinctly American orthography, ultimately leading to our contemporary configuration. Since Webster simply “chose already existing options [from the competing variety of a less orthographically rigid age]” (Algeo 2000, 598), the question arises of how -or managed to survive all the way to the 1800s when it never seemed to have found a distributional niche of its own. Moreover, the nature of the previous findings, based on the usage of printed texts from the 16th century onward, creates an information gap: was the distribution of these variants similar in Middle English? Did print shape the form of these words in contrast to handwriting? The present paper thus aims to answer these questions by means of a corpus-based study drawing its source material from the Parsed Corpus of Early English Correspondence (PCEEC 2006). The corpus, composed of over 2 million words produced in the period 1410-1680, will allow us to trace the origin of the construction to the latter Middle Ages as well as to shed light on the handwriting–printing dichotomy for the eventual orthographic standardisation of this phenomenon in English., Ministerio de Universidades
RIUMA. Repositorio Institucional de la Universidad de Málaga
Publicación Contribución de congreso (ConferenceOutput)

As I Love the Name of honour: Orthography in the L1 Varieties of English

  • Pacheco-Franco, Marta
English is spoken today by an estimate of 1,452 million users around the globe. Though the language scores second when it comes to native speakers, its status as a lingua franca accounts for its diffusion among non-native communities (Ethnologue 2022). As of today, English is spoken in the five inhabited continents: Africa, America, Asia, Europe and Oceania. Such a geographical expansion on the part of the language means that linguistic variation is bound to occur, and it does. Research on the field of World Englishes has recently undertaken the study of the patterns of usage among the many varieties that exist today. A quick literature review reveals a myriad of works addressing syntactic, lexical and even pragmatical differences (see, for example, Kirkpatrick 2010), always enquiring into both the inner- and the outer-circle varieties (Kachru 2008). However, the linguistic level of orthography has been systematically disregarded until very recently (cf. Calle-Martín 2021; Gonçalves et al. 2018). One of the reasons for this lack of attention in terms of research is the invariable aspect of spelling today, which exhibits near-to-no variation in standard Present-day English. Moreover, when taking into consideration the few cases of spelling variation that do exist today ‒such as -ise vs. -ize‒, the assumption has always been that the varieties of English worldwide would normally adhere to the British model in light of their shared historical and cultural bonds with the United Kingdom. Nevertheless, numerous publications in the area of World English are shedding light on the phenomenon of Americanisation in most linguistic levels, and that should include orthography. Indeed, the extant cases of spelling variation in Present-day English are geographically distributed and descriptions of the current orthographic paradigm are typically provided in binaries, with British English facing off American English (Trudgill & Hannah 2008). Such a state of affairs has raised the following questions: Is spelling also becoming Americanised? If so, are all the varieties of English equally susceptible to this phenomenon? The present paper puts forward a corpus-based investigation on the distribution of -our/-or, -re/-er and -isation/-ization to answer these questions. By drawing quantitative and qualitative data from the Corpus of Global Web-based English, the aforementioned spelling variants will be analysed in the six inner-circle varieties. In doing so, the study aims not only at describing the usage patterns of these orthographic forms, but also at understanding what sociolinguistic mechanisms ‒if any‒ are responsible for setting this phenomenon in motion in those varieties that are less prone to linguistic change. The tentative results so far show correlation between the developmental stage of each of the varieties under study and their degree of Americanisation., Ministerio de Universidades
RIUMA. Repositorio Institucional de la Universidad de Málaga
Publicación Contribución de congreso (ConferenceOutput)

Orthographic variation in English: a contrastive study on the distribution of word-final spelling variants in language online and offline

  • Pacheco-Franco, Marta
The history of the English language is one of orthographic variation, first due to the lack of standardisation of earlier periods –which was put to an end in the Early Modern period–, and later because of the deepening of its orthography –especially, after the completion of the Great Vowel Shift– (Cook, 2004; Rogers, 2005; Stenroos & Smith, 2016). These qualities of the writing system have exceptionally led to the emergence of different orthographic styles, such as British English and American English (henceforth BrE and AmE, respectively) (Cook, 2004: 178). BrE and AmE have been considered different varieties since the nineteenth century, after the publication of Webster’s American Dictionary of the English Language (1828). In light of the expansion of English worldwide and of the newly acquired speakers and functions of the language, these labels have often been used as umbrella terms, referring also to the spelling conventions of those varieties with a historical or cultural link either to the United Kingdom or to the United States. However, recent research (Gonçalves et al. 2018; Pacheco-Franco, 2020) has shown that American forms are also occurring in varieties that ought to follow BrE spelling conventions, which points to Americanisation as an ongoing process in orthography, as well as in other linguistic levels (Mair, 2013). These findings aside, the input for studies like these often comes from Computer-Mediated Communication (or CMC), which raises the following questions: Are these findings specific to language online? Will the same results be found in corpora representing offline, written English? The purpose of the following paper is, therefore, to verify whether the phenomenon of Americanisation is limited to the online medium or whether it is widespread instead. Given that the investigation at hand is at a preliminary stage, the only items under study will be the word-final pairs -our/-or, -isation/-ization and -re/-er, which are amongst the most widely localized distinctions. The data will be handled by comparing the quantitative results drawn from the overlapping varieties included in the GloWbE (Davies, 2013) and the ICE corpora. The findings, though tentative, evidence that most varieties of offline English continue to follow the unmarked norms, whereas English online shows an ongoing tendency towards the American standard. These quantitative data will in turn be analysed from a number of perspectives, the core being the theory of textual registers as put forward by Biber and Egbert (2016, 2018) and Biber (2019). Their classification of texts into a continuum headed by spoken language at one end and written language at the other will provide a framework for the interpretation of the data above. This leads one to expect that the closer a particular register is to spoken language –as it occurs with English online (Crystal, 2011)–, the more variation and innovation is to be found. Analyses of language-internal factors like linguistic simplification and of sociolinguistic concepts such as group cohesion (Coulmas, 2016) are also due to fully understand the issue in question., Ministerio de Universidades
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Implementation of activities for the evaluation of the specific instrumental transversal competence in subjects in the area of mechanical engineering

  • Pedrosa, Ana M.|||0000-0001-8069-5620
  • Sánchez-Orgaz, Eva María|||0000-0002-8864-3056
  • Lozano-Mínguez, Estívaliz|||0000-0003-4576-826X
  • Martinez-Sanchis, Sandra|||0000-0002-3223-0623
[EN] Most of the higher education frameworks work and evaluate transversal competences, to achieve the excellence of graduates, not only academically but also integrating social aspects, ethics, communication, teamwork, etc. To this end, the present work studies a common methodology both in the activities, to improve the acquisition of the ¿Specific Instrumental¿ transversal competence, as well as in its evaluation. In the practical sessions, the student uses a detailed tutorial with the procedure to obtain the numerical result. The evaluation of the ¿Specific Instrumental¿ transversal competence is deficient following this structure, since it does not show whether the student acquires autonomy to solve similar problems. Therefore, an unguided alternative activity was proposed at the end of each session, which allows to see the evolution of the student in the face of a different problem without guidelines. Experience shows that it is rash to expect the student to handle the program autonomously in the first session. For this reason, the delivery deadline for tasks will be extended by a few weeks. Obviously, guarantee of authenticity is lost, but responsibility for learning is transferred to the student. Allowing the student to spend the time necessary for deep learning, without the pressure of ending the session., Authors gratefully acknowledge the financial support of the Vicerrectorado de Estudios, Calidad y Acreditación and the Vicerrectorado de Recursos Digitales y Documentación of the Universitat Politècnica de València (project PIME B/19-20/165) and the Instituto de Ciencias de la Educación of the Universitat Politècnica de València (EICE INTEGRAL).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

The relationship between motivation and performance of university students

  • Nolé-Fajardo, Maria Luisa|||0000-0001-9476-9387
  • Marín-Morales, Javier|||0000-0003-1271-2892
  • Llinares Millán, María Del Carmen|||0000-0003-2270-807X
  • Higuera-Trujillo, Juan Luis
[EN] Different variables affect the performance of university students. Motivation is one of them, so teachers try to enhance it through their teaching methodologies. However, most of the studies focused on the influence of motivation come from a single experimental situation, so extrinsic variables such as the specific design of the classroom could be affecting it simultaneously. Therefore, although there are reasons to consider that higher motivation helps to increase cognitive performance, the quantification of this relationship is not clear. This was the aim of the present study: to evaluate the relationship of motivation in students' cognitive performance in different design situations, so that the design effect is diluted. For this purpose, a field study was conducted. 100 university students carried out cognitive performance tests in two very different real classrooms, after which they were asked about their motivation. The quantification of performance focused on memory (remembering an auditory list of words, similar to the experiments based on the DRM paradigm) and attention (reaction time to auditory stimuli, similar to the auditory and continuous performance experiments). The quantification of motivation was done through the Spanish version of the EMSI scale, making it possible to discern between intrinsic motivation, external regulation, identified regulation, and amotivation. The results show that there are very strong relationships between motivation and performance in attention and memory; especially in attention. Results may be of interest for educators and for researchers., This work was supported by the Ministerio de Economía, Industria y Competitividad of Spain (Project BIA2017-86157-R, and PRE2018-084051). The first author is supported by Ministerio de Educación (FPU19/03531).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Performance y documentación: propuesta de un modelo para la adquisición y conservación de obra performativa

  • Fernández-Valdés, Paula
  • Cuesta, Salomé|||0000-0002-7898-8093
[ES] En un mundo que tiende exponencialmente hacia la transformación digital y la desobjetualización, encontramos que en el ámbito de la cultura se producen cada vez más experiencias en torno a lo virtual, lo intangible y lo inmaterial. Estos fenómenos, activados por la convergencia entre nuevas tecnologías y producción artística, generan complejas obras performativas que afectan a los protocolos propios del campo de la conservación y la restauración. La complejidad de trabajar con estas tipologías es especial, ya que son piezas que se caracterizan por estar basadas en el tiempo, ser efímeras, vivas y dinámicas. ¿Se puede conservar una acción? ¿La audiencia participa en la obra? ¿Necesita ser documentada? A partir del estudio de los protocolos de conservación de los considerados nuevos medios, desarrollaremos un modelo conceptual con el objetivo de abordar la complejidad de las obras performativas y reflexionar sobre posibles modelos para su preservación.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

PSPU-Net for Automatic Short Axis Cine MRI Segmentation of Left and Right Ventricles

  • Pérez-Pelegrí, Manuel
  • Moratal, David|||0000-0002-2825-3646
  • Monmeneu, Jose V.
  • López-Lereu, María P.
  • Ruiz-España, Silvia
  • Del-Canto, Irene
  • Bodi, Vicente
[EN] Characterization of the heart anatomy and function is mostly done with magnetic resonance image cine series. To achieve a correct characterization, the volume of the right and left ventricle need to be segmented, which is a timeconsuming task. We propose a new convolutional neural network architecture that combines U-net with PSP modules (PSPU-net) for the segmentation of left and right ventricle cavities and left ventricle myocardium in the diastolic frame of short-axis cine MRI images and compare its results against a classic 3D U-net architecture. We used a dataset containing 399 cases in total. The results showed higher quality results in both segmentation and final volume estimation for a test set of 99 cases in the case of the PSPU-net, with global dice metrics of 0.910 and median absolute relative errors in volume estimations of 0.026 and 0.039 for the left ventricle cavity and myocardium and 0.051 for the right ventricles cavity., DM acknowledges financial support from the Conselleria d'Educacio, Investigacio, Cultura i Esport, Generalitat Valenciana (grants AEST/2019/037 and AEST/2020/029), from the Agencia Valenciana de la Innovacion, Generalitat Valenciana (ref. INNCAD00/19/085), and from the Centro para el Desarrollo Tecnologico Industrial (Programa Eurostars-2, actuacion Interempresas Internacional), Spanish Ministerio de Ciencia, Innovacion y Universidades (ref. CIIP20192020). We are grateful to Andres Larroza for his valuable technical assistance in the project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Ultrasonic Holograms to Enhance Hyperthermia Volumes

  • Andrés, Diana
  • Vappou, Jonathan
  • Jimenez, Noe|||0000-0002-6539-670X
  • Camarena Femenia, Francisco|||0000-0002-6713-1414
[EN] In this work we numerically and experimentally study the performance of large-volume hyperthermia induced by acoustic holographic-modulated high-intensity focused ultrasound (AHmHIFU) in gelatin phantoms. Excellent agreement was found between thermal simulations of the AHmHIFU system and temperature maps characterized with Proton Resonance Frequency Shift MR-thermometry at 1.5 T. ROIs inside which experimental temperature elevation was greater than 4 degrees were 11 mm by 16 mm and 7 mm by 30 mm with and without the holographic lens, respectively. Most importantly, standard deviation inside these ROIs were equal to 12% and 40% of the maximum temperature with and without the lens. This demonstrates that a wider and more uniform heated region can be generated using the holographic lens, showing the capabilities of acoustic holograms to be used as a low-cost alternative for large-volume hyperthermia treatments, This research has been supported by the Spanish Ministry of Science, Innovation and Universities (MICINN) through grants IJC2018-037897-I, FPU19/00601 and PID2019-111436RBC22, by the Agencia Valenciana de la Innovaci o through grants INNCON/2021/8 and INNVA1/2020/92, by Generalitat Valenciana through grant AICO/2020/268. Action co-financed by the European Union through the Programa Operativo del Fondo Europeo de Desarrollo Regional (FEDER) of the Comunitat Valenciana 2014-2020 (IDIFEDER/2018/022) and (IDIFEDER/2021/004).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Metodologías Agile para el desarrollo de softskills: aplicando SCRUM en titulaciones STEM

  • Castello-Sirvent, Fernando|||0000-0002-2088-0039
[ES] Este trabajo describe la aplicación de la metodología Scrum en estudios de grado y post-grado de la Escuela Técnica Superior de Ingeniería Industrial (ETSII) de la Universitat Politècnica de València y analiza esta metodología Agile como instrumento de desarrollo competencial para las softskills trabajo en equipo y liderazgo. Además, esta investigación evalúa la percepción que el alumnado de titulaciones STEM sobre ambas softskills integradas por la Universitat Politècnica de València en su programa de desarrollo competencial. El objetivo de esta investigación es evaluar las posibilidades que ofrece Scrum para el desarrollo de la competencia transversal de trabajo en equipo y liderazgo en los futuros titulados de ingeniería. Esta investigación se ha llevado a cabo dentro de los proyectos de innovación y mejora educativa (PIME / 19-20 Ref.150, Ref.151 y Ref.152) financiados por la Universitat Politècnica de València. El desarrollo competencial analizado se articula desde el fomento de la cooperación empleando una metodología Agile de amplio recorrido, apoyando el pensamiento crítico y la creatividad para la generación de soluciones rápidas y adecuadas que den adecuada respuesta a un contexto empresarial caracterizado por entornos VUCA (volátiles, inciertos, complejos y ambiguos). El trabajo de campo fue realizado durante el curso 2020-2021 aplicando metodología docente de tipo híbrido, esto es, de forma simultánea presencial y remota síncrona. La investigación sigue una metodología cualitativa que facilita la observación y descripción del proceso seguido, suponiendo una guía de reproducción para futuras investigaciones. Además, se suministró un cuestionario al alumnado, a fin de evaluar su percepción sobre la competencia transversal objeto de estudio y cómo esta percepción podía verse alterada en función de la aplicación de una metodología Agile para su desarrollo en el aula. Los resultados muestran diferencias de percepción sobre la competencia transversal trabajo en equipo y liderazgo, entre alumnos de grado y postgrado, así como entre hombres y mujeres. Las diferencias iniciales convergen tras la aplicación de Scrum en el aula, mejorando la percepción de utilidad de la competencia evaluada. Otro de los resultados revela mejores resultados en términos de cooperación y creatividad en las soluciones generadas por los diferentes equipos. Los alumnos modifican su percepción sobre la competencia transversal trabajo en equipo y liderazgo en función de la metodología empleada. El uso de metodologías Agile y su aplicabilidad en el aula fueron recibidas con un elevado grado de satisfacción entre el alumnado de titulaciones STEM. El uso de Scrum contribuyó a modificar el interés por un desarrollo profesional de dicha competencia a largo plazo. Este estudio permite fijar líneas de trabajo posteriores para desarrollar investigación que permita evaluar el desarrollo de softskills en un análisis longitudinal sobre titulados en grados y másteres STEM., PIME / 19-20 Ref.150, Ref.151 y Ref.152
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Desarrollo de videojuegos mediante equipos multidisciplinares

  • Mollá, Ramón|||0000-0003-0704-9336
  • Abad Cerdá, Francisco José|||0000-0001-5896-8645
Este trabajo ha sido financiado por el Vicerrectorado de Estudios, Calidad y Acreditación de la Universitat Politècnica de València, a través de la Convocatoria A+D. Proyectos de Innovación y Mejora Educativa (PIME 19-20/167).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

How does the use of digital platforms impact on students marks at high education?

  • Esteso, Ana|||0000-0003-0379-8786
  • Alarcón Valero, Faustino|||0000-0002-0783-3932
  • Prats-Montalbán, José Manuel|||0000-0001-6294-4486
  • Rodríguez-Sánchez, María De Los Ángeles
[EN] More and more universities use educational digital platforms to support teaching. Due to the covid-19 crisis, and with the online teaching approval, the usage of digital platforms in universities has gone from being an option to a necessity. Therefore, efforts have been made to promote the use of existing platforms in each university. This has required teachers not only to make an effort to transform and adapt in record time all the presential teaching to virtual teaching, but also has required professors to learn how to use some of the features of existing digital platforms that were not familiar to them. However, did using this type of platforms positively impact on high education students marks? This study aims to determine if such impact existed in engineering schools. More concretely, this paper focus on engineering students from different grades and levels from the Universitat Politècnica de València in Spain, and on the use of the PoliformaT digital platform, which is an adaptation of Sakai platform for the mentioned university. Statistics data provided by PoliformaT about the number of visits, number of events with the platform, and downloaded documents per student for several subjects from the School of Industrial Engineering and the School of Informatics for the course 2019-2020 are analysed. Multiple linear regression models on marks obtained by students and their activity on PoliformaT platform have been built to determine if the usage of digital platforms has any relation with the students¿ marks. A varied casuistry is observed in the results. Relations of the analysed items with marks have been identified in some of the analysed subjects, still these relations being moderate. In this sense, some unconsidered factors might be influencing these relations, being appropriate to analyse them in future research. On the other hand, it is necessary to re-analyse this same scenario in future courses when both, students and professors, have enough usage level of the employed teaching tools. Next course we expect that some of the deficiencies identified in this first study will be reduced after both actors become familiar to these digital tools., This work has been developed within the framework of the projects Coordinación metodológica a través de webs de apoyo en títulos ETSII para diferentes Competencias Trasversales of the call for Educational Innovation and Improvement Projects (PIME) with code PIME/19-20 Ref. 150, Ref. 151 and Ref. 152, in its institutional modality, promoted by the Vice-Rectorate for Studies, Quality and Accreditation and the Institute of Education Sciences of the Universitat Politècnica de València. The second author was supported by the Generalitat Valenciana (Conselleria de Educación, Investigación, Cultura y Deporte) under Grant ACIF/2019/021.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Design and use of an evaluation tool for assessment of instrumental skills within a subject related to materials science

  • Andrés-Ruiz, Víctor Tomás
  • Sonseca Olalla, Agueda|||0000-0002-2776-4399
  • Sahuquillo, Oscar|||0000-0001-5360-3743
  • Benavente Martínez, Rut|||0000-0002-4566-9475
[EN] The interest in a competence-based approach in the university, continues increasing at a considerable rate in the European Higher Education Area. Generic competences (specific of the sort of education) assessment is nowadays considered crucial to support socio-educational demands. Nevertheless, the methodologies for the assessment/evaluation of the generic competences and their inclusion in the curriculum has yet to be adequately achieved. Competency-based learning requires either the development of new evaluation tools or adjustment of the existing ones in order to support marking changes needed for new learning-oriented active methodologies. In this sense, questionnaires are an innovative educational tool for competence evaluation although the development of a solid body of knowledge is still a pending task. For this reason, this study proposes a methodological tool based on a questionnaire for rating the assessment (or not) of Specific Instrumental generic competence (instrumental skills), as defined in our university, by undergraduate students. In this regard, a practical intervention was designed to integrate the evaluation of activities related to Instrumental Skills in undergraduate students of Chemical Engineering, taking advantage of a computer practice session programmed as a part of the Materials Science subject. The appropriateness of the developed questionnaire, based on some learning outcomes, as a tool to properly score the competence of interest has been analysed by comparison of the obtained marks with the ones coming from more regular evaluation tools. The results may lead to some interesting conclusions to university professors when creating appropriate competency-based scoring questionnaires., Authors gratefully acknowledge the financial support of the Vicerrectorado de Estudios, Calidad y Acreditación and the Vicerrectorado de Recursos Digitales y Documentación of the Universitat Politècnica de València (Project PIME B/19-20/165 and Project PIME C/20-21/201) and the Instituto de Ciencias de la Educación of the Universitat Politècnica de València (EICE INTEGRAL).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Anatomy of the BLIS family of algorithms for matrix multiplication

  • Castelló, Adrián|||0000-0002-8576-8451
  • Quintana-Ortí, Enrique S.|||0000-0002-5454-165X
  • Igual, Francisco D.
[EN] The efforts of the scientific community and hardware vendors to develop and optimize linear algebra codes have historically led to highly-tuned libraries, carefully adapted to the underlying processor architecture, with excellent (near-peak) performance. These optimization efforts, however, are commonly focused on obtaining the best performance possible when the involved operands are large and "squarish" matrices. New computationally-intensive applications (e.g., in deep learning) are increasingly demanding high-performance BLAS (Basic Linear Algebra Subprograms) also for small operands in any of their dimensions. In this paper, we tackle this problem by refactoring the general matrix-matrix multiplication (GEMM) algorithm within a specific high-performance implementation of BLAS, named BLIS, proposing a complete family of algorithmic variants to implement GEMM with different strategies to exploit the target cache hierarchy, together with the changes to be applied to architecture-specific codes to instantiate a complete GEMM implementation. Experimental results on an ARM processor (NVIDIA Carmel) reveal significant performance differences between the members of the GEMM family, depending on the shape and dimension of the matrix operands., This work was supported by the research project PID2020-113656RB-C22 of MCIN/AEI/10.13039/501100011033, EU (FEDER), the Spanish MINECO, under grants RTI2018-093684-B-I00, PID2021-126576NB-I00, and CM via Multiannual Agreement with Complutense University in the line Program to Stimulate Research for Young Doctors in the context of the V PRICIT under projects PR65/19-22445 and CM S2018/TCS-4423. A. Castello is a FJC2019-039222-I fellow supported by MCIN/AEI/10.13039/501100011033.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Impact of the &quot, Comunicat&quot, methodology on the improvement of the &quot, effective oral communication&quot, student outcome of the students of the master in food safety and quality management

  • Pérez-Esteve, Édgar|||0000-0002-0452-1394
  • Silvestre Cerdà, Joan Albert|||0000-0003-2291-8296
  • Matarredona Desantes, Nuria|||0000-0003-4220-2383
  • Oltra Badenes, Raúl Francisco|||0000-0002-1522-8230
  • Bas, María del Carmen
  • Lerma-García, María Jesús
[EN] During academic course 2017-2018 the Comunica't methodology was created to help students to self-learn all the skills needed to master the areas of domain of the general student outcome effective oral communication. After two academic years of implementation, the goal of this work is to analyse the degree of contribution of this methodology to development of the "Effective Oral Communication students outcome of students that followed the methodology during the subject Audits of Food Safety and Quality Systems, belonging to the Master in Food Safety and Quality Management. To this end, at the beginning of the subject, students were asked to present a topic related to the subject and evaluated with respect to the six areas in which the project has defined the development of the outcome following a rubric. Then the methodology was presented, and at the end of the teaching period the procedure was repeated. Finally, marks obtained before and after the learning intervention were compared. Results showed that the methodology contributed in a great extent to improve the ordering of ideas in the presentation, the non-verbal communication and the design of the slides. Therefore, although there are fields where the methodology contributed to a lower percentage, it can be concluded that the methodology is very effective in improving effective oral communication student outcome., This work has been developed within the research project called Implementación de una plataforma cloud para el desarrollo de una metodología autoformativa de la CT Comunicación Efectiva y sus procesos de evaluación (Exp.: PIME/18-19/51) funded by the Vice-Rectorate for Studies, Quality and Acreditation of the Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Analysis of digital teaching tools in the new educational paradigm

  • Rodríguez-Sánchez, María De Los Ángeles
  • Esteso, Ana|||0000-0003-0379-8786
  • Alemany Díaz, María Del Mar|||0000-0002-0992-8441
  • Boza, Andres|||0000-0002-5429-0416
[EN] Nowadays most high education professors use several digital tools to support teaching, such as education platforms and other sources like digital slides or digital documents. Most universities rely on their own educational platforms, which has been mainly used to share documents between professors and students. These platforms reinforce the master classes, but do not replace the typical face-to-face classes. For instance, the platform used by the Universitat Politècnica de València in 2006 is called PoliformaT and is an adaptation of Sakai. On this digital platform, professors and students can share and manage information and documents from their degree or master subjects, such as tasks, exams, content repository, etc. Due to the COVID-19 crisis, the high education professors forced to replace face-to-face classes by virtual classes, to confront the new educational paradigm that has emerged. Furthermore, they have had to deepen into the functionalities offered by existing platforms and to adapt their teaching to other types of platforms that allow virtual teaching such as Microsoft Teams, Google Classroom or Blackboard Learn. Therefore, because of the current situation and the potential that e-learning platforms and tools have in university teaching, it has led to the emergence of numerous software related to teaching. However, due to the short reaction time to adapt face-to-face to virtual teaching, no comparisons have been made between existing digital tools to define which of them is most appropriate for each university and its teaching style. Hence, a deep analysis of existing digital tools to support teaching is required. This paper aims to analyse and compare several teaching software tools. For that, the functionalities of the most used teaching tools are compared, and their main advantages and disadvantages are analysed in order to obtain the best tools to be used in high education., This work has been developed within the framework of the projects Coordinación metodológica a través de webs de apoyo en títulos ETSII para diferentes Competencias Trasversales of the call for Educational Innovation and Improvement Projects (PIME) with code PIME/19-20 Ref. 150, Ref. 151 and Ref. 152, in its institutional modality, promoted by the Vice-Rectorate for Studies, Quality and Accreditation and the Institute of Education Sciences of the Universitat Politècnica de València. The first author was supported by the Generalitat Valenciana (Conselleria de Educación, Investigación, Cultura y Deporte) under Grant ACIF/2019/021.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Web based on e-learning objects as support to the development of transversal competences for engineering students

  • Alemany Díaz, María Del Mar|||0000-0002-0992-8441
  • Villanueva López, José Felipe|||0000-0002-7684-6884
  • Vallés Lluch, Ana|||0000-0002-7896-8666
  • García-Serra García, Jorge|||0000-0002-9315-7941
[EN] Active learning methodologies stand out among the priority lines in the field of higher education, exemplified by flipped teaching or project-based learning (PBL). The latter is a methodological approach of marked complexity and close to reality, which favours learning experiences with high educational impact, knowledge integration, and the transfer of what has been learnt to professional reality. In this context, it becomes necessary to work and assess the students¿ performance related not only to specific competences (SC) as usual, but also to transversal ones (TC), previously and simultaneously. The Universitat Politècnica de València (UPV), being aware of the increasing demand of TCs by employers and society, has defined 13 TCs whose training and assessment are integrated in their Bachelor's and Master's Degrees by means of the so called control point subjects. Based on the experience acquired in the School of Industrial Engineering (ETSII) since a number of subjects were appointed as control points of TCs in its 5 Degrees and 7 Masters, 6 of the TCs can be singled out for being the most difficult for teachers: Innovation, creativity and entrepreneurship; Teamwork and leadership; Ethical, environmental and professional responsibility; Knowledge of contemporary problems; Permanent learning; Time planning and management. Unlike the instrumental TCs, which are intrinsic to the subjects taught, the (inter)personal and systemic ones are more complicated to fit in the subjects, because they require more complex or wider environments, or are very time consuming. That is why it has been proposed to use the flipped teaching methodology for the students¿ autonomous learning in TCs, through the development of an online educational platform. The website, with a section per TC, is accessible from https://www.etsii.upv.es/competencias/index-es.php. Its structure covers the definition of the TC, the aspects to enhance to acquire it, a performance level test, and resources to improve it (in-house produced and external). The value of this initiative is double: on the one hand, it is a space designed for the training of students and not for assisting the teacher (the UPV already put material available to teachers), and, on the other hand, it will serve as a vertical coordination axis between the subjects of a Degree. Future actions of improvement include examples of application of the techniques proposed to engineering cases, organization of resources by domain levels, and experiences of UPV students., The authors acknowledge the financial support partly from the School of Industrial Engineering (ETSII) of UPV and partly from the Universitat Politècnica de València through the ¿Coordinación metodológica a través de webs de apoyo en las titulaciones de la ETSII para las Competencias Transversales¿ PIME/19-20 Ref.150, Ref.151 and Ref.152 projects.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Improved pairwise comparison transitivity using strategically selected reduced information

  • Benítez López, Julio|||0000-0002-3222-3036
  • Izquierdo Sebastián, Joaquín|||0000-0002-6625-7226
  • Carpitella, S.
The research is financially supported by the Czech Science Foundation, Grant No. 19-06569S.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Learning to learn with concept maps: A didactic applicationwith future engineers

  • Canós-Darós, Lourdes|||0000-0002-9609-2880
  • García Félix, Vicenta Eloína
  • Santandreu Mascarell, Cristina|||0000-0002-9574-9852
[EN] As is well known, the design of university curricula is focused on the acquisition of skills. Transversal competences stand out, which are key and transferable throughout life. They include cognitive, metacognitive skills, and instrumental and attitudinal knowledge. Its main characteristics are: integrative, transferable, interdependent, multifunctional and evaluable (ICE, 2015: 2). Four transversal competences are worked on and evaluated in the course presented in this work: CT04. Innovation, creativity and entrepreneurship; CT06. Teamwork and leadership; CT10. Knowledge of contemporary problems, and CT11. Learning to learn. In particular, we pay special attention to the development of learning to learn competence, a key competence set by the European Commission (EC, 2007). We consider it essential for students to achieve a good level of acquisition of this competence, since it encompasses many useful skills and abilities for good professional performance (communication, information management, critical thinking, problem solving, interpersonal relationships, etc.). A complete review of the literature on the definition of this competence and its dimensions can be seen in Gargallo López et al. (2020). In this work we present an experience carried out in a Business Management course, a compulsory subject at the master's level. The experience that we describe focuses on the elaboration of a conceptual map of the contents worked on in a part of the agenda that generally presents comprehension problems in the students. Conceptual maps (Novak and Gowin, 1988) are a valuable tool that can help when there exist problems of understanding. In this sense, a work strategy has been designed to allow conceptual maps to be incorporated into the teaching-learning process and to use this tool to build their own knowledge. In this context, Pozo and Monereo (1999) indicate that learning is facilitated if the teacher helps students to use appropriate information representation and summary techniques. The experience has been positive for both the teacher and the students. In general, the majority of students value (qualitative evaluation), on the one hand, the level of organization and understanding acquired through the construction of the conceptual map and, on the other hand, the importance of teamwork through collaborative group dynamics. Discussions have allowed them to interact and have made them easier to increase their knowledge. Moreover, the construction of the final conceptual map implies applying different learning strategies such as decision making, discussions, sharing, synthesizing information, ranking and presenting the concepts, etc., and allows them to extrapolate data to reflect on other topics. In addition, it favors the development of skills such as learning to learn, teamwork, leadership and communication (oral and written). Among the difficulties, students point out the lack of time and the novelty of the methodology., Universitat Politècnica de València (Spain), PIME 19-20/186
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Active methodologies for deep learning in sustainable development goals

  • Romero, Inmaculada|||0000-0001-7876-9328
  • Paches Giner, Maria Aguas Vivas|||0000-0002-7796-5228
  • Sebastiá-Frasquet, M.-T.|||0000-0002-8042-5628
  • Hernández Crespo, Carmen|||0000-0002-6727-0481
[EN] The general objective of this project was to improve the quality of student learning, from the point of view of a global objective, sustainable development, and therefore aligned with the SDGs (Sustainable Development Goals). It is intended that students achieve deep learning in this area, favouring the transfer of the knowledge acquired to their future professional and social life. This deep learning promotes the integral development of the student, not only from an academic point of view, but also social and ecological. Project Based Learning (PBL), as an active learning methodology, is being widely used as a deep learning strategy. In this project, it has been used in several subjects, from different degrees, schools, and campus. The learning strategies have been evaluated by means of a learning evaluation questionnaire (CEVEAPEU) before and after the application of the PBL. In addition, student satisfaction and generic skills (i.e. ethical, environmental and professional responsibility) have been assessed. The project aims to find a solution a specific real case, such as an environmental or social problem. The results show that PBL has favoured the cooperative work of students and has increased their motivation. The students could select the topics that interest them the most and that they consider important in their professional future. They have worked collaboratively and actively, planning the project, making decisions, implementing it, and evaluating it. The students have ¿acted¿ and the teachers have been advisors or guides, thus promoting intrinsic motivation. This active methodology has allowed students to learn in a collaborative and cooperative way, fostering their motivation and achieving deep learning in environmental aspects., The project of innovation and educational improvement in which this communication is framed has received financial support from the Institute of Education Sciences (ICE) of the Universitat Politècnica de València (UPV) Proyecto de Innovación y Mejora Educativa (PIME/19-20/174 ), Objetivo Agenda 2030 y UPV 2020: Aprendizaje ambiental profundo en la UPV.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Use of ict tools in hybrid environments of presential and virtual learning. Experience in two mechanical engineering subjects of master&apos, s degree

  • Pedrosa, Ana M.|||0000-0001-8069-5620
  • Vila Tortosa, María Paloma|||0000-0003-3399-231X
  • Llopis-Albert, Carlos|||0000-0002-1349-2716
  • Rupérez Moreno, María José|||0000-0001-8457-7963
[EN] In March 2020, the World Health Organization (WHO) raised to an international pandemic level the outbreak of the coronavirus (COVID-19) disease caused by the Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV2). Consequently, the Spanish government declared the State of Alarm on March 14th, 2020. From that moment on, all non-essential activities were tightened lockdown. This measure affected all levels of education, and face-to-face learning was suspended until the end of the academic year. While the last year all the educational community was forced to suddenly move to online platforms, this year has been rather marked by the need of flexibility in the learning model. The main reasons are the constant threat of global lockdowns, the changing local mobility restriction measures and the forced isolation or quarantine in case of infections or close contact with someone with a positive Polymerase Chain Reaction (PCR) test. This situation has drastically affected the face-to-face teaching model. At the same time, this uncertain scenario has undoubtedly been an opportunity to implement Information and Communications Technology (ICT)activities in our teaching. This paper presents some actions implemented in two subjects of mechanical design of two different master¿s degrees with 36 and 19 students, respectively. The developed resources concern to the learning materials provided to the students, both for theoretical and practical lessons. The audio-visual materials generated over the classes, both videos and annotations on the virtual whiteboard, has also been managed. Finally, the delivery and defence of the students' works have been adapted. As it was foreseeable all, some of the students or the teacher, have followed the classes online over the term. In all cases, the developed materials and the methodology followed have been valid for use in face-to-face teaching, online and blended learning, thus providing the flexibility required. The level of success has been measured, mainly through a survey answered by the students. In addition, it has been analysed objective data, such as the marks and the number of visits or downloads of the documents uploaded to the UPV e-learning platform. Finally, it is concluded which actions taken would be valid for the post-COVID era., Authors gratefully acknowledge the financial support of the Vicerrectorado de Estudios, Calidad y Acreditación and the Vicerrectorado de Recursos Digitales y Documentación of the Universitat Politècnica de València (project PIME B/19-20/165 and project PIME C/20-21/201) and the Instituto de Ciencias de la Educación of the Universitat Politècnica de València (EICE INTEGRAL).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Active-learning methods for control engineering teaching using web applications

  • González Sorribes, Antonio|||0000-0003-2690-0472
  • Del Val Noguera, Elena|||0000-0002-1279-3429
[EN] The development of active-learning methods is strongly proliferating nowadays in Higher Education studies. Roughly speaking, active learning can be understood as a way of learning in which students are more directly involved in the learning process. It is commonly accepted that, in contrast to traditional methods, substantial improvement of the own learning process is achieved through active methodologies. In particular, teachers must address an extra effort to engage the interest of students when faced with subjects provided with strong theoretical background (such as automatic control related topics). Indeed, one of the main drawbacks reported by the own students is their difficulty to connect real engineering application and theoretical lessons. In this paper, we present an active learning method conceived for automatic control subjects with the aid of virtual laboratories compatible with a wide range of web browsers for this end. In a first stage, some real engineering problems for students in the classroom are raised. Through a suitable follow-up of intermediate results and the appropriate discussions, teachers will be able to obtain an immediate feedback while evaluating the quality of learning at each stage. It is worthwhile mentioning that virtual labs are developed using the standard web interactive programming language HTML and Javascript, which only requires a web browser to be executed. Hence, in comparison to previous academic years, it is expected to better promote the usefulness of the control engineering for the students¿ careers with high degree of autonomy for self-scheduling homework and low cost resources, while improving the self-motivation and long-term quality of learning., This work is supported by the Universidad de Zaragoza project PIIDUZ_19_342 Desarrollo e implantación de un modelo basado en aula invertida y metodologías activas para asignaturas de informática e ingeniería de sistemas.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

A novel inlet boundary condition for VOF-DNS simulations of the primary breakup of prefilming airblast atomizers

  • Payri, Raul|||0000-0001-7428-5510
  • Salvador, Francisco Javier|||0000-0003-3269-2251
  • Carreres, Marcos|||0000-0001-6430-6613
  • Moreno-Montagud, Carlos
[EN] Prefilming airblast atomizers are becoming widely used in state-of-the-art aero engines. The planar configuration experimentally studied by the Karlsruhe Institute of Technology (KIT) has been computationally replicated by different research groups through both Large Eddy Simulation (LES) and Direct Numerical Simulation (DNS). The present investigation reports the use of a novel inlet boundary condition for the DNS study of prefilming airblast atomization that allows accounting not only for the inflow turbulence but also for the temporal evolution of the liquid film thickness at the DNS inlet. The methodology implies the resolution of subsequent singlephase LES, two-phase flow LES and two-phase flow DNS. The former simulations are solved by using the interFoam solver from the OpenFoam toolbox, whereas the latter is computed with the PARIS open-source code. Results for a widely known operating condition show a different degree of atomization when the liquid film thickness evolution is accounted for than the one obtained through the use of a constant liquid film thickness at the domain inlet., Research leading to these results has received funding from the Clean Sky 2 Joint Undertaking under European Union¿s Horizon 2020 research and innovation programme through the ESTiMatE project, grant agreement 821418. We acknowledge PRACE for awarding us access to computational resources on JOLIOT CURIE-AMD at GENCI@CEA, France (proposal 2019204944). Support given to Carlos Moreno by Universitat Politècnica de València through the ¿FPI-Subprograma 2¿ grant within the ¿Programa de Apoyo para la Investigación y Desarrollo (PAID-01-19)¿ is acknowledged. We must thank Marco Crialesi and Wojciech Aniszewski for their technical advice on custom modifications on PARIS, and Johan Sundin for his implementation of the contact angle model. We also thank Achille Schmitter, Hugo Martínez and Lucas González for help processing the 1-phase LES, 2-phase LES and DNS, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Innovation, Creativity and Entreprenaeurship Learning Outcomes in Higher Education

  • Cuenca, L.|||0000-0003-3589-4182
  • Bonet Espinosa, Mª Pilar
  • Boza, Andres|||0000-0002-5429-0416
  • Fuentes-Durá, Pedro|||0000-0001-7085-7091
  • Lajara-Camilleri, Natalia|||0000-0002-1376-3133
  • Marin-Garcia, Juan A.|||0000-0001-5416-3938
  • Peris-Ortiz, Marta|||0000-0002-7912-7033
  • Ruiz Font, Leonor
A major trend in higher education is the current shift towards improving students’ creativity and individual thinking. The aim of this shift is to bring students closer to the real world and the complex problems they will encounter outside formal education. Competencies describe what training participants should be able to do at the end of such training. This paper defines the learning outcomes associated with the innovation, creativity and entrepreneurship competency. This proposal draws on a review of the innovation and competencies literature and the expertise of selected staff. According to the literature review and the following analysis by the authors, the main indicators (key aspects) associated with the competency are as follows: seek opportunities, generate ideas, execute plans and add value. These indicators vary by educational level to reflect increasing complexity and difficulty in the learning outcomes at each stage of university education. This paper proposes learning outcomes and indicators associated with the competencies of innovation, creativity and entrepreneurship. It corresponds to the first essential step associated with the definition of a competency assessment., This research has been partially supported by: Project for educational improvement B019/14. Integrating teamwork and leadership in class, funded by School of Higher Technical Studies in Engineering and Design and the Vice-Rector of Studies, Quality and Accreditation. Project for educational improvement (PIME/2014/A09). Students' perceptions and motivations in the development and assessment of competencies at the UPV, funded by the Escuela Técnica Superior de Ingeniería Industrial, Escuela Técnica Superior de Ingeniería Informática and the Vice-Rector of Studies, Quality and Accreditation. European Union [FINCODA 554493-EPP-1-2014-1-FI-EPPKA2-KA] and Universitat Politècnica de València [PIME/2014/A/013/A - Barómetro INCODE: Evaluación de Competencias de lnnovación en la Empresa y en la Universidad]. (The European Commission’s support for this publication does not constitute an endorsement of its contents, which reflect the views of the authors only. The European Commission cannot be held responsible for any use of the information contained herein). Project for educational improvement (PIME/2013/A/016/B) RECICRE - Rubric for evaluating competence of innovation and Tempus IDEA Inter Disciplinary Education Agenda.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Improving Student Outcomes Attainment by Project Based Learning in Electrical Machines

  • Sapena-Bano, Angel|||0000-0002-3888-6498
  • Burriel-Valencia, Jordi|||0000-0002-1680-4412
  • Riera-Guasp, Martín|||0000-0003-1327-242X
  • Terrón-Santiago, Carla|||0000-0001-8178-3331
  • Martinez-Roman, Javier|||0000-0001-7544-8481
[EN] This contribution describes the change in methodology introduced in the subject Electrical Machines within the Industrial Technologies Engineering Degree at Escuela Técnica Superior de Ingeniería Industrial, Universitat Politècnica de Valencia. The main purpose of the methodology change was to improve the student outcomes attainment by applying active methodologies, specifically Project Based Learning (PBL) supported with Flipped-Teaching (FT). This methodology change was expected to improve the integration of knowledge by the students through the development of a project devoted to the analysis of induction machines. Evidence has been collected in three main aspects to attest the achievements: the student outcomes attainment level is improved, along with other positive aspects like boosting the student responsibility in its own learning (learn to learn), the ability to solve problems or also the student motivation., This research has been funded by Universitat Politecnica de Valencia Industrial Technologies Engineering Degree (GITI) at Escuela in the frame of the Aprendizaje + Docencia 2019: Proyectos de Innovacion y Mejora Educativa program, with reference 19-20/188, Aprendizaje basado en proyectos en el area de maquinas electricas en ingenieria industrial.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

La integración de Competencias Transversales en la Educación Superior en Ingenierías mediante herramientas de e-learning. El caso de la ETSII en la UPV, The integration of Transversal Competences in Higher Education in Engineering through e-learning tools. The case of the ETSII at the UPV

  • Villanueva López, José Felipe|||0000-0002-7684-6884
  • Alemany Díaz, María Del Mar|||0000-0002-0992-8441
  • Vallés Lluch, Ana|||0000-0002-7896-8666
  • García-Serra García, Jorge|||0000-0002-9315-7941
  • Alarcón Valero, Faustino|||0000-0002-0783-3932
  • Andrés-Bello, Javier
  • Aragonés-Beltrán, Pablo|||0000-0003-0538-9409
  • Espinós Capilla, Ana|||0000-0001-7335-4676
  • Esteso, Ana|||0000-0003-0379-8786
  • Fuertes-Miquel, Vicente S.|||0000-0003-3524-2555
  • Gimenez Palomares, Fernando
  • Lapuebla-Ferri, Andrés|||0000-0001-9667-236X
  • Museros Romero, Pedro|||0000-0002-1389-0204
  • Vilariño-Feltrer, Guillermo|||0000-0002-3063-3808
  • Fuster Estruch, María Vicenta
[EN] One of the objectives of Higher Education, increasingly demanded by the labor market, is to guarantee the development of professional, social and ethical skills of students. Making the learning of these type of transversal competences (TC) compatible with the specific competences of the degree in the time frame of the studies, is not an easy task in particular of some of these competences, in engineering profile degrees. For this reason, at the Higher Technical School of Industrial Engineering (ETSII) of the Universitat Politècnica de València (UPV) it has been designed an e-learning platform by the teaching staff, students and employers, coordinated by the SubDirectorate of Educational Innovation and within the framework of a Project of Innovation and Educational Improvement of the UPV,. This platform allows students to train in TC at their own pace according to their needs and teachers to use methodologies appropriate to their subjects and domain level adapted to the engineering framework. In this way, the platform can be used as a vertical coordination axis between subjects, for the development of TC at the different levels of mastery throughout the ETSII students' studies., [ES] Uno de los objetivos de la Educación Superior cada vez más demandado por el mercado laboral es garantizar el desarrollo de habilidades profesionales, sociales y éticas del alumnado. Compatibilizar el aprendizaje de este tipo de competencias de carácter transversal (CT) con las competencias específicas propias de la titulación en el marco temporal de los estudios, no es tarea sencilla especialmente para algunas de estas competencias y en titulaciones de perfil ingenieril. Por este motivo, en la Escuela Técnica Superior de Ingeniería Industrial (ETSII) de la Universitat Politècnica de València (UPV) se ha diseñado una plataforma e-learning por parte del profesorado, estudiantes y empleadores, coordinados por la Subdirección de Innovación Educativa y en el marco de diferentes Proyectos de Innovación y Mejora Educativa de la UPV, Esta plataforma permite al estudiantado formarse en CT de manera autónoma según sus necesidades, y al profesorado recurrir a metodologías adecuadas a sus asignaturas y nivel de dominio adaptadas al ámbito ingenieril. De esta forma, la plataforma puede usarse como eje de coordinación vertical entre asignaturas, para el desarrollo de CT en los distintos niveles de dominio a lo largo de los estudios del alumnado de la ETSII., Este trabajo ha sido desarrollado en el marco de los proyectos "Coordinación metodológica a través de webs de apoyo en títulos ETSII para diferentes CT" de la convocatoria de Proyectos de Innovación y Mejora Educativa Institucionales con código PIME/19-20 Ref.150, Ref.151 y Ref.152, impulsada por el Vicerrectorado de Estudios, Calidad y Acreditación y el Instituto de Ciencias de la Educación de la UPV
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Coordinated Siting and Sizing of Electric Taxi Charging Stations Considering Traffic and Power Systems Conditions

  • Clairand, Jean-Michel
  • González-Rodríguez, Mario
  • Kumar, Rajesh
  • Vyas, Shashank
  • Escrivá-Escrivá, Guillermo|||0000-0002-3202-4571
[EN] Electric Vehicles (EVs) have gained increased attention courtesy their potential to mitigate environmental issues associated with transportation. To integrate EVs in transportation and power networks, it is essential to properly perform the siting and sizing of charging stations. In particular, this task is more challenging for users that have more rigid schedules such as taxi drivers. This paper proposes a coordinated siting and sizing methodology for electric taxi (ET) charging stations considering both transportation and power system constraints. The case of Quito, Ecuador has been analyzed. The results indicate the optimal placement of the ET charging stations and the number of charging spots to be installed., This paper belongs to the project SIS.JCG.19.03 from Universidad de las Americas-Ecuador. The authors would like to thank Irvin Cedenos from BYD E-motors Ecuador for the fruitful discussions.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Dynamic beamforming for large area scan in array-based photoacoustic microscopy

  • Cebrecos, Alejandro|||0000-0001-8790-8668
  • García-Garrigos, Juan José
  • Jimenez, Noe|||0000-0002-6539-670X
  • Benlloch Baviera, Jose María|||0000-0001-6073-1436
  • Camarena Femenia, Francisco|||0000-0002-6713-1414
  • Descals, Andreu
[EN] We explore the use of a beamforming method intended for large-area scanning in optical-resolution photoacoustic microscopy. It has been evaluated in a experimental setup that comprises a low-cost laser diode and a phase array with a 128-elements linear probe. Three different beamforming strategies are discussed: no-beamforming, static beamforming and dynamic beamforming. The method has been tested in gelatine-based phantoms as well as ex-vivo organs. Results show that, compared with the other two, dynamic beamforming increases up to 15dB and homogenizes signal-to-noise ratio (SNR) along images of roughly 1 cm2. The method and system presented here could be the baseline for more advanced array-based systems that leverage the low-cost laser sources for clinical applications., This research has been supported by the Spanish Ministry of Science, Innovation and Universities through grant Juan de la Cierva - Incorporacion (IJC2018-037897-I), and program Proyectos I+D+i 2019 (PID2019-111436RB-C22). Action co-financed by the European Union through the Programa Operativo del Fondo Europeo de Desarrollo Regional (FEDER) of the Comunitat Valenciana 2014-2020 (IDIFEDER/2018/022). A.C. received financial support from Generalitat Valenciana and Universitat Politecnica de Val ` encia through the grants APOSTD/2018/229 and program PAID-10-19, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Analysis of the main weaknesses of university students regarding the &quot, effective oral communication&quot, student outcome

  • Bas, María del Carmen
  • Lerma-García, María Jesús
  • Matarredona Desantes, Nuria|||0000-0003-4220-2383
  • Oltra Badenes, Raúl Francisco|||0000-0002-1522-8230
  • Pérez-Esteve, Édgar|||0000-0002-0452-1394
  • Silvestre Cerdà, Joan Albert|||0000-0003-2291-8296
[EN] The "Effective oral communication" is one of the most demanded student outcomes in the workplace, since being a good communicator is essential in any field. Inefficient communication can lead to misinterpretations and erroneous conclusions. Therefore, it is a very important student outcome both in the university and in the workplace. The student or graduate must know how to communicate effectively, both orally and in writing, appropriately using the necessary resources and adapting to the characteristics of the situation and the audience. However, despite its importance, the disparity in the mastery level of the oral communication student outcome by students makes it difficult to work this ability in the classroom through collective activities. For this reason, to properly develop this student outcome in a subject, it is important to have an idea of the main weaknesses that students have in terms of effective oral communication, to be able to establish and carry out actions and training activities that can improve that transversal student outcome. This article presents the analysis of the main weaknesses that students of a university subject have. This analysis is made based on a self-assessment survey, a self-diagnosis, which allows the student to detect their weaknesses and strengths in the domain of effective oral communication, and at the same time, gives information to the teacher about the main deficiencies of their students, so the teacher can devise and launch training activities appropriate to the level of their students., This work has been developed within the research project called Implementación de una plataforma cloud para el desarrollo de una metodología autoformativa de la CT Comunicación Efectiva y sus procesos de evaluación (Exp.: PIME/18-19/51) funded by the Vice-Rectorate for Studies, Quality and Acreditation of the Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Design Considerations of a Monitoring System of a Farm for Energy Efficiency Purposes

  • Moposita, Karen
  • Noboa-López, Xavier
  • Clairand, Jean-Michel
  • Briceño-León, Marco
  • Pantaleo, Antonio-Marco
  • Escrivá-Escrivá, Guillermo|||0000-0002-3202-4571
[EN] The monitoring of industry processes can optimize the use of resources and improve its efficiency. In dairy farms, several parameters from the processes must be monitored. This paper proposes the design of a monitoring system for a farm that produces dairy products and jams. Several similar studies are analysed. Based on this, and on the farm characteristics, a novel design is developed. The principal benefits of the system are also exposed., This work was supported by Universidad de las Americas - Ecuador under project SIS.JCG.19.01. The authors would like to thank Monica Guevara, Andrea Maldonado, and Francisca Martinez from Universidad de las Americas - Ecuador for their valuable help and information.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Desarrollo y evaluación de una estación de control de tierra para vehículos aéreos no tripulados

  • Velasco Carrau, Jesús
  • Reynoso Meza, Gilberto
  • Garcia-Nieto, Sergio|||0000-0002-2722-742X
  • Sanchís Saez, Javier|||0000-0001-9697-2696
Los vehículos aéreos no tripulados (UAV¿s) son vehículos autónomos, diseñados para cumplir con diversas misiones en el ámbito civil y militar. Actualmente, se comienza a extender su uso en situaciones donde la misión de vuelo conlleva la posibilidad de riesgo de pérdidas humanas. En el siguiente documento, se describe el desarrollo del sistema de telemetría para la gestión de las comunicaciones entre dispositivos UAVs y las estaciones de tierra que monitorizan el comportamiento de estos sistemas.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Introducing Project Based Learning for Teaching and Learning Electrical Drives: A case of UPV

  • Sapena-Bano, Angel|||0000-0002-3888-6498
  • Burriel-Valencia, Jordi|||0000-0002-1680-4412
  • Puche-Panadero, Rubén|||0000-0003-2090-1941
  • Manuel Pineda-Sanchez|||0000-0001-7844-8831
  • Martinez-Roman, Javier|||0000-0001-7544-8481
[EN] This contribution describes the change in methodology introduced in the subject Dynamic Analysis and Control of Electrical Drives within the Industrial Engineering (Electricity branch) Master Degree at Escuela Técnica Superior de Ingeniería Industrial, Universitat Politècnica de Valencia. The main purpose of the methodology change was to improve the student outcomes attainment by applying Project Based Learning. This methodology change was meant to improve also the student¿s ability to solve problems and their responsibility on their own learning through a project aimed at the development of an electric drive. Evidence has been collected in three main aspects to attest the achievements: the student outcomes attainment level is improved, along with other positive aspects, the student perception of their attainment is very positive, and the instructor opinion on the methodology change is extremely positive., This research has been funded by Universitat Politecnica de Valencia in the frame of the Aprendizaje + Docencia 2019: Proyectos de Innovacion y Mejora Educativa program, with reference 19-20/188, Aprendizaje basado en proyectos en el area de maquinas electricas en ingenieria industrial.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Pulmonary Vein Isolation Induces Changes in Vectorcardiogram P-wave Loops

  • Ortigosa, Nuria|||0000-0002-5272-7661
  • Cano, Óscar
  • Sandberg, Frida
[EN] Pulmonary vein isolation (PVI) is considered a standard treatment of paroxysmal atrial fibrillation aiming to restore and maintain sinus rhythm. The purpose of this study is to analyse how the PVI treatment affects the electrical conduction pattern in the atria. We have compared the morphology of P wave loops extracted from the vectorcardiogram (VCG) before and after PVI. Ten patients suffering from paroxysmal atrial fibrillation who underwent PVI were included in the study. All patients were in sinus rhythm before as well as after the procedure. Vectorcardiogram was obtained using the Kors matrix and the resulting P-waves were automatically delineated. Using these marks, P-wave loops were constructed from the three orthogonal leads of the VCG. The first and second eigenvalues of the P-wave loops increased after the PVI procedure was completed, whereas the ratio of the second to the first eigenvalue, quantifying the roundness of the Pwave loop, decreased significantly after PVI. These results show that PVI induces morphological changes of the Pwave loops., N. Ortigosa acknowledges the support from Spanish Ministerio de Ciencia, Innovacion y Universidades en el marco del Programa Estatal de Promocion del Talento y su Empleabilidad en I+D+i -Subprograma Estatal de Movilidad- under grant CAS19/00168; from Generalitat Valenciana under grant Prometeo/2017/102, and from Spanish MINECO under grant MTM2016-76647-P. F.Sandberg acknowledges the support from The Swedish Research Council (VR2019-04272).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Una tarea para la escuela de negocios del siglo XXI: estudiantes computacionalmente competentes

  • Calafat Marzal, Consuelo|||0000-0001-7040-181X
  • Debón, A.|||0000-0002-5116-289X
  • Marin-Sanchez, Maria del Mar|||0000-0002-1507-1798
  • Puertas, Rosa|||0000-0003-4937-4575
  • Ribal, Javier|||0000-0002-9355-0145
[ES] El mercado laboral de los estudiantes de administración y dirección de empresas exige conocimientos informáticos que deben prepararse en las escuelas de negocios. Las escuelas de negocios deben identificar las herramientas y habilidades esenciales necesarias para el desarrollo de la profesión en el siglo XXI. En este contexto, la Facultad de Administración y Dirección de Empresas de la Universitat Politècnica de València hace que los estudiantes de grado estén siempre en contacto con la tecnología y las herramientas informáticas adecuadas para cada asignatura. El objetivo de este estudio es doble. En primer lugar, este estudio tiene como objetivo recoger los conocimientos técnicos en las herramientas informáticas de la formación en el proceso de aprendizaje del grado en Gestión y Administración Pública (GAP). En segundo lugar, analizar si este conocimiento se ajusta a las demandas del sector público y privado., Este trabajo ha sido realizado gracias a la financiación del Proyecto de Innovación y Mejora Educativa (PIME/18-19/60) de la convocatoria Aprendizaje + Docencia de la Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Transmedia storytelling edutainment experience in engineering studies

  • Del Val Noguera, Elena|||0000-0002-1279-3429
  • González Sorribes, Antonio|||0000-0003-2690-0472
[EN] Transmedia Storytelling Edutainment is a new learning paradigm that develops from the coordinated and strategic use of multiple media/platforms for the communication of a story (content), involving students in the story as prosumers (producers+consumers). Experiential learning combined with storybased curriculums can be a very effective means of educating students. Specifically, Transmedia Storytelling Edutainment is effective in improving engagement, motivation and knowledge retention with students. Experiences have been made with young people in basic education, but they are scarce in university studies and more specifically in technical bachelor¿s degrees. Transmedia storytelling is a complex task that requires design considerations of narrative, engagement, and interaction. This paper analyses the structure and characteristics of transmedia experiences in university. Based on the results of the analysis, we propose a transmedia experience in a technical subject of the Degree in Computer Science. This strategy takes into account the following aspects: the story should be convincing and based on realism; the promotion of cooperation and a sense of community be promoted; and that there be multimodality in the learning environments, as well as challenging students to go deeper into the course material., This work is supported by the Universidad de Zaragoza project PIIDUZ_19_348 Aplicación De Narrativas Transmedia En El Contexto De Asignaturas De Informática E Ingeniería De Sistemas.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

First in-vivo Demonstration of Bilateral Blood-Brain Barrier Opening Using Acoustic Holograms in Mice

  • Jiménez-Gambín, Sergio
  • Pouliopoulos, Antonios N.
  • Konofagou, Elisa E.
  • Jimenez, Noe|||0000-0002-6539-670X
  • Benlloch Baviera, Jose María|||0000-0001-6073-1436
  • Camarena Femenia, Francisco|||0000-0002-6713-1414
[EN] Focused ultrasound (FUS) with microbubbles allows for non-invasive targeted drug delivery into the central nervous system (CNS) by temporally and locally disrupting the bloodbrain barrier (BBB). However, current FUS technologies are not able to simultaneously target several brain structures. In this work, we open the BBB in two regions in a murine brain using a single-element transducer with a coupled 3D-printed holographic lens, which is designed to simultaneously create two symmetric foci in anesthetized mice in vivo. The proposed approach shows many advantages: (1) simple and low-cost; (2) correction of aberrations due to skull and water cone; and (3) multiple BBB opening (BBBO) locations with only one sonication, becoming a time- and cost-effective therapeutic system for neurological diseases. For the in-vivo experiment, contrast-enhanced, T1- weighted MRI scan was conducted following BBBO, showing gadolinium extravasation at two symmetric focal spots. The two BBBO regions were separated by 3.0 +- 0.7 mm (n=5 mice) compared to 5.3 mm in full-wave simulations. This work shows the capability of bifocal ultrasound generation in separate animals using a unique uCT scan. A bilateral BBBO was achieved with a single sonication using a holographic lens in mice, thus improving the efficiency and defining a new approach for several neurodegenerative diseases targeting symmetric brain structures, e.g. hippocampus, putamen or caudate. This study demonstrates the feasibility of hologram-assisted BBBO for targeted drug delivery in the CNS in symmetric regions in separate hemispheres., This research has been supported by the Spanish Ministry of Science, Innovation and Universities through grants Juan de la Cierva - Incorporacion (IJC2018-037897-I) and PID2019-111436RB-C22, by the Agencia Valenciana de la Innovación through grant INNVAL10/19/016, by Generalitat Valenciana through grants No. ACIF/2017/045 and BEFPI/2019/075, and by the National Institutes of Health through grants 5R01EB009041 and 5R01AG038961. Action co-financed by the European Union through the Programa Operativo del Fondo Europeo de Desarrollo Regional (FEDER) of the Comunitat Valenciana 2014-2020 (IDIFEDER/2018/022).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Comparative Analysis of Tagging and Feature-Tracking Cardiac MRI Techniques for the Evaluation of Cardiac Deformation

  • Tejero-Cervera, Pascual
  • Del-Canto, Irene
  • López-Lereu, María P.
  • Monmeneu, Jose V.
  • Ruiz-España, Silvia
  • Santabárbara, José Manuel
  • Maceira, Alicia
  • Bodi, Vicente
  • Moratal, David|||0000-0002-2825-3646
[EN] Currently, there is a high prevalence of cardiovascular diseases, being the leading cause of mortality worldwide. Thus, a rapid and effective evaluation of the heart is increasingly relevant to diagnose the patient early and achieve appropriate treatment. For this reason, this study aims to compare myocardial deformation parameters such as circumferential strain (segmental, base, mid, apical and global) and global torsion values by the CMR tissue tagging reference technique in SPAMM cine images and the promising feature-tracking technique in b-SSFP cine images, in 31 healthy subjects and 35 patients diagnosed with infarct. The results obtained showed that there is a high agreement in the inter-technique and inter-observer reproducibility for all myocardial parameters evaluated. Therefore, it can be determined the CMR featuretracking technique is highly reproducible for circumferential strain and torsion parameters and could currently be a reliable clinical alternative to assess myocardial function., DM acknowledges financial support from the Conselleria d'Educacio, Investigacio, Cultura i Esport, Generalitat Valenciana (grants AEST/2019/037 and AEST/2020/029), from the Agencia Valenciana de la Innovacion, Generalitat Valenciana (ref. INNCAD00/19/085), and from the Centro para el Desarrollo Tecnologico Industrial (Programa Eurostars-2, Interempresas Internacional), Spanish Ministerio de Ciencia, Innovacion y Universidades (ref. CIIP-20192020).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Manual de procedimiento para la implantación de la metodología SCRUM en estudios universitarios

  • Castello-Sirvent, Fernando|||0000-0002-2088-0039
[ES] El mundo empresarial ha generalizado en las últimas décadas los entornos VUCA, caracterizados por su elevada volatilidad, incertidumbre, complejidad y ambigüedad. Así, las empresas y sus equipos de trabajo deben ofrecer respuestas ágiles y plenamente adaptables a los continuos cambios que se producen en el entorno. Las metodologías tradicionales de enseñanza se caracterizan por su enfoque estático. Sin embargo, las empresas precisan talento que sepa adaptarse a estos entornos VUCA. Los sistemas de aprendizaje deben permitir a los futuros egresados el desarrollo de competencias transversales o softskills capaces de mejorar, entre otros, su adaptabilidad y resiliencia. Este trabajo está parcialmente apoyado por la Universitat Politècnica de València (España), conforme al proyecto de investigación PIME 19-20/186. El objetivo de este trabajo es constituir un manual de procedimiento que permita guiar la implantación de la metodología Scrum en los estudios de grado y postgrado universitario del Espacio Europeo de Educación Superior (EEES), contando con el apoyo de las Tecnologías de la Información y las Comunicaciones (TIC) en un entorno de docencia híbrida. Se describe la historia de las metodologías Agile y su evolución desde una función de utilidad ligada al desarrollo de software y a otras aplicaciones de ingeniería, para extenderse entre los equipos de alto rendimiento hasta alcanzar al conjunto de actividades de la economía del conocimiento. A continuación, se profundiza en la metodología Scrum, sus roles, eventos y artefactos. Finalmente, se desarrolla la adaptación al aula de una metodología creada para el trabajo en equipo en la empresa. Este trabajo presenta una secuencia-guía para la aplicación de la metodología Scrum en el aula por parte del profesorado universitario. Su enfoque permite la adaptación a cualquier tipo de disciplina y área de conocimiento. Se ha previsto una duración mínima de las sesiones establecida en dos horas. Además, el proceso se ha planteado tomando en consideración dos formatos: docencia presencial y docencia híbrida. En ambos casos, Scrum puede ofrecer ventajas de implementación, tanto en sesiones de prácticas de aula como en sesiones de prácticas de laboratorio. Las diferentes metodologías Agile pueden facilitar la capacidad de respuesta incremental en el alumnado en los entornos VUCA, contribuyendo a mejorar su adaptabilidad, capacidad de respuesta, resiliencia y capacidades analíticas y prospectivas. En este contexto, Scrum se sitúa como una de las metodologías más extendidas para el trabajo en equipo adaptativo en contextos VUCA. Este estudio facilita la comprensión de Scrum y permite llevar a cabo el despliegue de esta metodología en el Espacio Europeo de Educación Superior (EEES)., Este trabajo está parcialmente apoyado por la Universitat Politècnica de València (España), conforme al proyecto de investigación PIME 19-20/186.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Towards a Classifier to Recognize Emotions Using Voice to Improve Recommendations

  • Fuentes-López, José Manuel
  • Rincón Arango, Jaime Andrés
  • Taverner-Aparicio, Joaquín José|||0000-0002-5163-5335
  • Botti V.|||0000-0002-6507-2756
[EN] The recognition of emotions in tone voice is currently a tool with a high potential when it comes to making recommendations, since it allows to personalize recommendations using the mood of the users as information. However, recognizing emotions using tone of voice is a complex task since it is necessary to pre-process the signal and subsequently recognize the emotion. Most of the current proposals use recurrent networks based on sequences with a temporal relationship. The disadvantage of these networks is that they have a high runtime, which makes it difficult to use in real-time applications. On the other hand, when defining this type of classifier, culture and language must be taken into account, since the tone of voice for the same emotion can vary depending on these cultural factors. In this work we propose a culturally adapted model for recognizing emotions from the voice tone using convolutional neural networks. This type of network has a relatively short execution time allowing its use in real time applications. The results we have obtained improve the current state of the art, reaching 93.6% success over the validation set., This work is partially supported by the Spanish Government project TIN2017-89156-R, GVA-CEICE project PROMETEO/2018/002, Generalitat Valenciana and European Social Fund FPI grant ACIF/2017/085, Universitat Politecnica de Valencia research grant (PAID-10-19), and by the Spanish Government (RTI2018-095390-B-C31).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

On-line tools to improve the presentation skills of scientific results

  • Campos-Taberner, M.
  • Gilabert, M.A.
  • Manzanares, J.A.
  • Mafé, S.
  • Cervera, J.
  • García-Haro, F.J.
  • Martínez, B.
  • García-Morales, V.
  • Aguilella, V.M.
  • Aguilella, M.I.
  • Alcaraz, A.
  • Ramirez Hoyos, Patricio|||0000-0002-0067-4887
[EN] In experimental sciences and engineering it is essential to communicate and present the results effectively. The authors have participated in several educational innovation projects since 2016, aimed at developing of materials to improve the communication skills of scientific results. An exhaustive and updated compilation of the international rules that constitute the basis for the writted and oral scientific presentations was carried out. The good teaching practices in these fields were also identified. The results of those previous projects have shown the need to incorporate web questionnaires and other interactive content into the educational program. These are adapted to the demands of the students and provide a training feeback. In this contribution, the new materials that are being developed within the innovation project UV-FPIE_PID19-1096780, funded by the University of Valencia, are presented. They are devoted to facilitate the acquisition of communication skills of scientific results. In particular, these tools combine ICT self-learning environments with traditional classroom teaching (blended learning). The project methodology includes educational data mining aimed at identifying the most effective materials and activities to achieve its objectives. The aim of these mixed learning tools is to facilitate the acquisition by the students of the necessary skills of oral and written communication, improve their presentation skills and, consequently, also their employability as university graduates., This work has been supported by the University of Valencia through project SFPIE_PID19-1096780.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Multifocal acoustic holograms for deep-brain neuromodulation and BBB opening

  • Andrés, Diana
  • Jiménez-Gambín, Sergio
  • Jimenez, Noe|||0000-0002-6539-670X
  • Camarena Femenia, Francisco|||0000-0002-6713-1414
[EN] Single-element focused ultrasound devices have demonstrated its ability to non-invasively open the Blood Brain Barrier. However, skull irregularities and absorption produce strong aberrations in the ultrasound focus. Recently, 3D-printed acoustic holograms were used to compensate aberrations and to produce a sharp focus. In addition, using this technology the geometry of the ultrasonic focus can be matched to the shape of the brain structure of interest. In this work, we experimentally and numerically report 3D-printed acoustic holograms for bilateral focusing through an ex-vivo human skull. Using holograms, we target different cerebral nuclei and the ultrasonic focuses are adapted to the target volumes, minimizing the acoustic field outside. Simultaneously, skull aberrations are corrected using phased-conjugation methods. The holographic surfaces were manufactured for a 100-mm aperture and 140-mm focal focused transducer at 500 kHz to focus through an ex-vivo human skull. Numerical and experimental results agree targeting several deep-brain nuclei: left-and-right putamen, caudate nuclei, and hippocampi, showing the potential of this low-cost technology to optimize BBBO or neuromodulation treatments., This research has been supported by the Spanish Ministry of Science, Innovation and Universities through grant Juan de la Cierva - Incorporacion (IJC2018-037897-I) and PID2019-111436RBC22, by the Agencia Valenciana de la Innovacio through grants INNVAL10/19/016 and INNCON/2020/009. Action cofinanced by the European Union through the Programa Operativo del Fondo Europeo de Desarrollo Regional (FEDER) of the Comunitat Valenciana 2014-2020 (IDIFEDER/2018/022).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Evaluation activities performance of the specific instrumental transversal competence in subjects of the mechanical engineering area

  • Pedrosa, Ana M.|||0000-0001-8069-5620
  • Lozano-Mínguez, Estívaliz|||0000-0003-4576-826X
  • Besa Gonzálvez, Antonio José|||0000-0002-7084-9937
  • Vila Tortosa, María Paloma|||0000-0003-3399-231X
  • Martinez-Sanchis, Sandra|||0000-0002-3223-0623
  • Sánchez-Orgaz, Eva María|||0000-0002-8864-3056
[EN] Nowadays, the European higher education space is concerned, not only about the transmission of theoretical knowledge, but also about the acquisition of soft-skills, which are increasingly demanded in the professional profiles of graduates. Therefore, the Universitat Politècnica de València (UPV) has elaborated its own program aiming to develop these generic capabilities, which are embedded in 13 Transversal Competences (CT in Spanish). All of them are worked on and evaluated in all UPV degrees, whether undergraduate or graduate. Specifically, the "Specific Instrumental" transversal competence has been working for two years by a team of lecturers from the Department of Mechanical and Materials Engineering (DIMM in Spanish). Their objective is to develop an effective methodology to work on the acquisition and evaluation of this competence. The tool chosen to work with is ANSYS®, which is widely used in the field of mechanical engineering. This commercial software provides numerical solutions to complex problems using the Finite Element Method (FEM). The proposed methodology has been implemented during this year in three different subjects with a total of 335 students and is based on previous experience carried out in small groups last year. The objective is also to consolidate a procedure suitable for large groups without increasing lecturer's dedication time. After analysing the characteristics that were not entirely satisfactory, the new proposal seeks to improve them while maintaining the correct actions of the previous experience. Thus, laboratory training sessions and a different timed exercise for each student are kept. The most important changes affect the distribution of the worktime of the student and the assessable exercises. The number of evaluable exercises has been reduced to one, as well as the content and the test score. The proposed exercise consists of modelling a mechanical component and carrying out several tasks related to the mechanical study of a component. The correct completion of the different sections allows a numerical evaluation of the laboratory sessions and the suitability of the methodology. At the same time, the justification of the steps followed, and the adequacy of the strategies followed give the level reached in the ¿Specific Instrumental¿ transversal competence. The results reveal that students have achieved a greater degree of autonomy in managing the software. Furthermore, the new evaluation system discriminates the mastery with greater rigor, in the past there were no intermediate marks, the capability was achieved or not. Additionally, all the practical sessions have been adapted to the sanitary situation following an online format. This adaptation to the COVID scenario has provided the opportunity to introduce changes in the lecturing material that will be maintained in the next courses., Authors gratefully acknowledge the financial support of the Vicerrectorado de Estudios, Calidad y Acreditación, the Vicerrectorado de Recursos Digitales y Documentación of the Universitat Politècnica de València (Project PIME B/19-20/165 and Project PIME C/20-21/201) and the Instituto de Ciencias de la Educación of the Universitat Politècnica de València (EICE INTEGRAL).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Computational Tools in Cosmology

  • Fullana Alfonso, Màrius Josep|||0000-0002-0196-7876
  • Arnau i Córdoba, Josep Vicent
[EN] Following the line started in a paper pulished in the Mathematics Journal in 2021, some interesting numerical and computational techniques used in part of our research in Cosmology are now presented. As remarked in that paper (with other algorithms we built), we also think the tools described in this conference presentation may work in different tasks concerning our research fields. Moreover, they may even be extended in Science and Technology in general. The approaches showed here have been developed in N-body algorithms applied when describing the CMB (Cosmic Miicrowave Background) anisotropies. In our methods, innovations in CMB maps treatments are performed. Such novelties may be extended to other studies., We acknowledge the financial support of the Spanish Ministerio de Ciencia, Innovacion y Universidades and the Fons Europeu de Desenvolupament Regional, Projects PID2019-109753GB-C21 and PID2019-109753GB-C22, the Generalitat Valenciana Project AICO/2020/125 and the Universitat de Valencia Special Action Project UV-INVAE19-1197312.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Cambios en los loops de las ondas P del vectocardiograma tras el aislamiento de las venas pulmonares

  • Ortigosa, Nuria|||0000-0002-5272-7661
  • Cano, O.
  • Sandberg, F.
[ES] La fibrilación auricular es la arritmia más frecuente en la práctica clínica. Además de los tratamientos antiarrítmicos, el aislamiento de las venas pulmonares mediante ablación por catéter es uno de los tratamientos utilizados acorde a las guías clínicas para ayudar a mantener el ritmo sinusal de forma indefinida en el paciente. El propósito de este estudio es analizar cómo dicho procedimiento afecta a los patrones de conducción eléctrica en las aurículas, y cómo estos se ven modificados en los registros electrocardiográficos registrados al paciente. Para ello, se ha comparado la morfología de las ondas P de los loops extraídos de los vectocardiogramas calculados a partir del electrocardiograma de superficie, antes y después del procedimiento en pacientes con fibrilación auricular paroxística. Estos pacientes tienen episodios autolimitados, permaneciendo gran parte del tiempo en ritmo sinusal y sin un alto grado de evolución de la arritmia. El primer y segundo autovalor de los loops, así como una medida de la redondez de los mismos señalaron cambios significativos tras el procedimiento, mostrando que el aislamiento de las venas pulmonares induce cambios morfológicos en los loops de las ondas P., N. Ortigosa agradece el apoyo del Ministerio de Ciencia, Innovación y Universidades en el marco del Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i -Subprograma Estatal de Movilidad- con la beca CAS19/00168, de la Generalitat Valenciana con el proyecto Prometeo/2017/102 y del MINECO con el proyecto MTM2016-76647-P.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Project Based learning applied to bachelors degree in energy engineering

  • Marton Lluch, Isabel|||0000-0001-6955-3912
  • Gallardo Bermell, Sergio|||0000-0002-3703-9983
  • Villanueva López, José Felipe|||0000-0002-7684-6884
  • Sánchez Galdón, Ana Isabel|||0000-0002-3159-8020
  • Carlos Alberola, Sofía|||0000-0002-0637-325X
[EN] The standards and guidelines for quality assurance in the European Higher Education Area (EHEA) lay down that one of the keys to combining learners knowledge and skills is the implementation of new student-centred active competence-based teaching methodologies. One of the most widely used and effective of these methodologies is Project Based Learning (PBL). Although a significant number of these initiatives have been carried out in recent decades, in most cases they are limited to implementing individual subjects with few applications to the degree curriculum. In this context, the main goal of this work was to develop a project-based learning system in two subjects of the Bachelor s Degree in Energy Engineering at the Universitat Politècnica de València. The problem is analysed from a practical point of view, using theoretical concepts in the subject of Statistics and their subsequent implementation in the subject "Energy and Sustainable Development". The developed methodology is described, together with the coordination between these two subjects, the results achieved and the initial conclusions obtained, This study was carried out within the framework of the Educational Innovation and Improvement Project (PIME in Spanish) Year 2018/19 Coordination of transversal competences in key subjects in the Energy Engineering Degree (Reference B16) of the Vice Chancellor for Studies, Quality and Accreditation of the Polytechnic University of Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Electric Vehicle Charging Load Prediction for Private Cars and Taxis Based on Vehicle Usage Data

  • Sarmiento-Delgado, Felipe
  • Clairand, Jean-Michel
  • Guerra-Terán, Paulo
  • Escrivá-Escrivá, Guillermo|||0000-0002-3202-4571
[EN] Electric Vehicles (EVs) are growing attention fortheir higher efficiency and less-polluting specifications. However,a massive introduction of EVs could lead to several issues inpower systems. Several authors have proposed various smartcharging approaches. But, these approaches could not be ap-propriately implemented without knowing the charging behaviorof the EV customers. Thus, this paper proposes an EV chargingload prediction for the particular case of Quito, Ecuador. Thisforecasting is performed based on data obtained from a GPSsystem and on statistical methods., This work belongs to project SIS.JCG.19.03 of Universidad de las Americas - Ecuador.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Towards the edge intelligence: Robot assistant for the detection and classification of human emotions

  • Rincón Arango, Jaime Andrés
  • Julian, Vicente|||0000-0002-2743-6037
  • Carrascosa Casamayor, Carlos|||0000-0003-3649-6530
[EN] Deep learning is being introduced more and more in our society. Nowadays, there are very few applications that do not use deep learning as a classification tool. One of the main application areas is focused on improving people¿s life quality, allowing to create personal assistants with canned benefits. More recently, with the proliferation of mobile computing and the emergence of the Internet of Things (IoT), billions of mobile and IoT devices are connected to the Internet. This allows the generation of millions of bytes of information about sensors, images, sounds, etc. Driven by this trend, there is an urgent need to push the IoT frontiers to the edge of the network, in order to decrease this massive sending of information to large exchanges for analysis. As a result of this trend, a new discipline has emerged: edge intelligence or edge AI, a widely recognised and promising solution that attracts with special interest to the community of researchers in artificial intelligence. We adapted edge AI to classify human emotions. Results show how edge AI-based emotion classification can greatly benefit in the field of cognitive assistants for the elderly or people living alone., This work was partly supported by the Generalitat Valenciana (PROMETEO/2018/002) and by the Spanish Government (RTI2018-095390-B-C31). Universitat Politecnica de Valencia Research Grant PAID-10-19.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Sub-Diffractive Acoustic Vortices by Nonlinear Mixing

  • Jimenez, Noe|||0000-0002-6539-670X
  • Ealo, Joao
  • Muelas-Hurtado, Rubén
  • Duclos, Aroune
  • Romero-García, Vicent
[EN] Vortex beams, characterized by a collimated wavefront with a phase dislocation at their principal axis, have found practical applications to construct acoustic tweezers for particle trapping and manipulation, or underwater communications. However, the natural diffraction of the wavefront limits the size of the vortex. This result in vortices whose bright core is larger than the wavelength, limiting their use for practical applications such as long-range underwater communications. In this work, we synthesize a vortex beam of sub-wavelength size at a distance beyond Rayleigh diffraction length using the nonlinear mixing of two confocal, high-frequency and detuned vortex beams of different topological charges. By using the nonlinear mixing of two confocal vortices, it was generated a low-frequency (1 kHz) focused vortex beam of integer topological charge whose distance between magnitude maxima is about 18 times smaller than its wavelength at a distance about 3 times the Rayleigh diffraction length. Sub-wavelength vortices emerge as a result of the spatiotemporal interference of two primary vortex beams due to the conservation of angular momentum during nonlinear wave-mixing. This mechanism opens new paths to design directive parametric antennas for vortex transceivers or particle manipulation systems at scales well below the diffraction limit., We acknowledge financial support from the Spanish Ministry of Science, Innovation and Universities through grant Juan de la Cierva Incorporacion (IJC2018-037897-I) and PID2019-111436RB-C22, and by the Agencia Valenciana de la Innovacio through grants INNVAL10/19/016. This article is based upon work from COST Action DENORMS CA15125. JPG and VRG gratefully acknowledge projects ANR-RGC METARoom (ANR-18-CE08- 0021) and the HYPERMETA funded under the program Etoiles Montantes of the Region Pays de la Loire.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Towards a Dynamic Edge AI Framework applied to autonomous driving cars

  • Muratore, G.
  • Rincón Arango, Jaime Andrés
  • Greco, G.
  • Fortino, G.
  • Julian, Vicente|||0000-0002-2743-6037
  • Carrascosa Casamayor, Carlos|||0000-0003-3649-6530
[EN] This work proposes an innovative solution in the field of Edge AI in order to efficiently exploit new hardware components available on the market at low cost. Edge AI means that algorithms are processed locally on a hardware device. The algorithms use data (sensor data or signals) that are created on the own device. The idea of this paper focuses on demonstrating the validity of the proposed solution by implementing an autonomous driving system that exploits communication between intelligent agents. In this case, our self-driving cars are equipped with a low-cost device that allows you to recognise objects along the way and consequently take actions by running a machine learning model. The presence of a machine learning model also allows the developer to modify it by extending the flexibility and application possibilities of the proposed solution., This work was partly supported by: ERASMUS+ Programme, KA1 Istruzione Superiore, Carta Erasmus+: 29388-EPP-1-2014-1-IT-EPPKA3-ECHE, ACCORDO PER LA MOBILITÀ ERASMUS PER STUDIO - a.a. 2019/2020, Progetto n o 2019-1-IT02-KA103-061203 - CUP: H25J19000080006, Generalitat Valenciana (PROMETEO/2018/002). Universitat Politecnica de Valencia Research Grant PAID-10-19.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Assessment of the use of technical software by the students in the context of mechanical engineering

  • Nadal, Enrique|||0000-0002-2808-298X
  • Rupérez Moreno, María José|||0000-0001-8457-7963
  • Giner Navarro, Juan|||0000-0002-0513-3625
  • Rovira, Andres|||0000-0001-8192-5571
  • Ródenas, Juan José|||0000-0003-2195-7920
  • Martínez Casas, José|||0000-0001-5706-4951
  • Pedrosa, Ana M.|||0000-0001-8069-5620
[EN] In the framework of the European Higher Education area, university teaching has focused in recent years on adapting Master's and Bachelor's degrees to the demands of the professional sector. To do this, the training and development of the generic and specific skills recommended for the incorporation of students into the job market have been priority objectives in the approach to study plans. However, there is no consensus on the methodologies for evaluating these skills, especially regarding how to separate the acquisition and / or improvement of the skills from the specific knowledge and skills of the subjects. Due to the lack of time, teaching staff seek methodologies that do not involve additional tests for the evaluation of competences, which would increase the number of tests to a non-realistic number with the corresponding assessment duties for the professors. In order to make a contribution in this regard, this work presents an approach for evaluating the ability to handle specific software applied to problems in the area of mechanical engineering. This work proposes a methodology for acquiring the required skills and an evaluation system to grade the degree of expertise in the manipulation of the software. In our University, this skill is called the Specific Instrumental Skill, which measures the ability of the students for using the tools in engineering, like, in this case, the use of software to run structural numerical simulations as ANSYS®. The methodology proposed is based on an a priori training. This training is based on 2 hours weekly sessions where the students should solve, in groups of 2 or 3 students, a set of labs with the help of the professor. The students do not need to deliver any report to the professor since the objective of the sessions is the training of the students. Therefore, the pressure over the student is low and the professor avoid to mark a high number of student¿s reports, allowing him to focus only on the learning process of the students and not on the evaluation during the training sessions. These labs increase the difficulty along a number of sessions. The last session consists in an exam in which the students must solve a lab similar to those already solved during the training sessions. This time, each student will work individually without the help of the professor and with a control of the time. Finally, the performance of the methodology is checked by a cross-test for the same students who are part of the group of students of another subject (control subject) where the same tool (ANSYS®) is used. The collected data showed that the students following this methodology acquire the sufficient expertise for handling the software and their skills outperform those of the students of the control subject who did not follow the proposed methodology. As a conclusion, the methodology proposed in this work guarantees a good level of expertise for the students, as shown by the results. Since the results in the final lab exam and the results of the cross-test coincides, the use of the final test exam could be interpreted as a good indicator of the degree of expertise in the use of the software. Additionally, the proposed methodology reduces the work load for the professor as it only requires assessing 1 report per student (instead of several reports for each group of 2 or 3 students in each of the session) while ensuring the authorship of the report., Authors gratefully acknowledge the financial support of the Vicerrectorado de Estudios, Calidad y Acreditación and the Vicerrectorado de Recursos Digitales y Documentación of the Universitat Politècnica de València (project PIME B/19-20/165) and the Instituto de Ciencias de la Educación of the Universitat Politècnica de València (EICE INTEGRAL).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Aprendizaje Basado en Proyectos en las Titulaciones de Grado de la Escuela Politécnica Superior de Alcoy

  • Sanchis, R.|||0000-0002-5495-3339
[ES] La metodología activa de Aprendizaje Basado en Proyectos (ABP) mejora la motivación, el rendimiento académico, la comunicación efectiva y las habilidades de resolución de problemas de los estudiantes. Para aprovechar estos beneficios y promover la colaboración y coordinación entre asignaturas, desde la Escuela Politécnica Superior de Alcoy de la Universitat Politècnica de València se ha apostado por la incorporación del ABP en los últimos cursos de Grado a través de un proyecto de innovación y mejora educativa. El objetivo de este artículo es describir dicho proyecto junto con los resultados obtenidos., La autora quiere agradecer al Vicerrectorado de Recursos Digitales y Documentación y el Vicerrectorado de Estudios, Calidad y Acreditación bajo la Convocatoria de Aprendizaje + Enseñanza (Convocatoria de Aprendizaje + Enseñanza (A+D2019)) y el Proyecto: PIME-A-157 por la financiación. Del mismo modo, desean también agradecer el apoyo del Instituto de Ciencias de la Educación de la Universitat Politècnica de València, la Comisión de Evaluación y Seguimiento de Proyectos de Innovación y Mejora Educativa (CESPIME) y a la Escuela Politécnica Superior de Alcoy.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Managing expert knowledge in water network expansion project implementation

  • Anchieta, Thomaz F. de F.
  • Santos, Saulo A. R.
  • Brentan, Bruno M.
  • Carpitella, Silvia
  • Izquierdo Sebastián, Joaquín|||0000-0002-6625-7226
[EN] The implementation of expansion projects of water networks supplying growing cities is deemed to be a complex decision-making problem involving both technical aspects and expert knowledge. Management and control processes must rely on experts in the field whose know-how must be coupled with techniques able to deal with the natural subjectivity that affects input evaluations. Given the presence of many decision-making elements, the choice of proper hydraulic technical parameters may be linked to the main aspects of analysis requiring formal expert evaluation. In this contribution, the simulation of hydraulic indicators is integrated with a multi-criteria approach able to eventually determine those areas of a water network through which organising the expansion may be more beneficial. The software EPAnet 2.0 is first used for hydraulic simulations, whereas the Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS) will eventually rank network¿s nodes. A case study is solved to demonstrate the applicability and effectiveness of the proposed approach., The research was financially supported by the Czech Science Foundation under Grant No. 19-06569S.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Satisfaction analysis of &quot, food safety and quality management&quot, master degree&apos, s students with the &quot, Comunicat&quot, methodology for the enhancement of the &quot, effective oral comunication&quot, student outcome

  • Oltra Badenes, Raúl Francisco|||0000-0002-1522-8230
  • Pérez-Esteve, Édgar|||0000-0002-0452-1394
  • Silvestre Cerdà, Joan Albert|||0000-0003-2291-8296
  • Matarredona Desantes, Nuria|||0000-0003-4220-2383
  • Bas, M.C.
  • Lerma-García, M.J.
[EN] The main goal of the present study is to analyze the satisfaction level of the students from the master degree "Food Safety and Quality Management" with the "ComunicaT" methodology, which was applied to improve the mastery level of the "Effective Oral Communication" student outcome. This methodology is being developed under an innovative and educational improvement research project funded by the Universitat Politècnica de València, and the general idea behind it is that the student, after performing an auto-diagnosis test, becomes capable to autonomously improve its oral communication skills. Thereby, the student, starting from his initial mastery level on this student outcome, follows a selfformative, adapted learning itinerary with proper learning activities for him/her to enhance his masterliness on this topic. The methodology has been carefully designed by several university lecturers coming from different universities, with a wide range of different profiles. It is mandatory to retrieve feedback from the students that participated in this methodology, in order to make it better, simpler and more efficient in further applications. With the results obtained in this work we assess the satisfaction level of the students with the "ComunicaT" methodology, and we identify improvement opportunities that can be exploited in the future., This work has been developed within the research project called Implementación de una plataforma cloud para el desarrollo de una metodología autoformativa de la CT Comunicación Efectiva y sus procesos de evaluación (Exp.: PIME/18-19/51) funded by the Vice-Rectorate for Studies, Quality and Acreditation of the Universitat Politècnica de València.
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Aplicación de redes neuronales para evaluar el estado funcional de pacientes con esclerosis múltiple, Application of Neural Networks for the Assessment of People With Multiple Sclerosis

  • Otamendi, Janire
  • Zubizarreta, Asier
  • Cabanes, Itziar
  • Portillo Pérez, Eva
[Resumen] La Esclerosis Múltiple es una enfermedad neurodegenerativa que actualmente no tiene cura. Sin embargo, las terapias personalizadas han demostrado ralentizar o incluso detener la evolución de la enfermedad, mejorando así la calidad de vida de los pacientes. Para diseñar dichas terapias, es esencial conocer el estado funcional de cada paciente, lo cual suele ser una tarea laboriosa. Ante esta situación, en este trabajo se propone el desarrollo de un clasificador de estado de pacientes de Esclerosis Múltiple. Para ello, se hace uso de redes neuronales artificiales, las cuales utilizan una base de datos obtenida mediante una contera inteligente para desarrollar un sistema que permita determinar el estado funcional de los pacientes., [Abstract] Multiple Sclerosis is a neurological degenerative disease with no cure. However, personalized rehabilitation therapies have demonstrated to be effective to reduce the effect of symptoms and improving this way the life quality of patients. To design such therapies, it is essential to know the functional status of each patient, which is usually a laborious task. For that reason, in this work a status classifier for Multiple Sclerosis patients is developed. Artificial neural networks are used for this task, which work with a database obtained by a Smart Tip for developing a system to determine the functional status of patients., Universidad del País Vasco/Euskal Herriko Unibertsitatea; GIU19/045, Este trabajo ha sido financiado por la Universidad del País Vasco UPV/EHU (GIU19/045), FEDER/Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación/DPDPI2017-82694-R, y la ayuda FPU del Ministerio de Ciencia, Innovación y Universidades (FPU19/04874), https://doi.org/10.17979/spudc.9788497498043
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Adapt-S: Effective DNN Pruning via Unified Accuracy and Performance Tuning

  • Castro, Roberto L.
  • Andrade, Diego
  • Fraguela, Basilio B.
Traballo presentado no: 2025 IEEE International Parallel and Distributed Processing Symposium (IPDPS), 03-07 June 2025, Milán, Italia © 2025 IEEE. This version of the paper has been accepted for publication. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works. The final published paper is available online at: https://doi.org/10.1109/10.1109/IPDPS64566.2025.00018, [Abstract]: Model sparsification has emerged as a promising approach to reducing model size with minimum impact on accuracy. This is achieved through the removal of some model parameters, a process also known as Deep Neural Network (DNN) pruning. The irregular nature of the generated sparse tensors poses a great challenge in the development of efficient GPU kernels optimized for these workloads. This challenge has been recently addressed through the use of hardware-aware semistructured sparsification methods designed to conform to specialized sparse formats and codesigned with template-based kernel implementations. These methods are commonly based on grouping the non-pruned values in blocks of a given size to generate regularity or on generating patterns that fit specialized hardware units. This pruning pattern-format-kernel triplet presents a high degree of tunability, both at the pruning and kernel sides, which can be used to fit certain accuracy-to-performance tradeoffs. On the pruning side, using larger blocks of consecutive non-pruned values favors performance over accuracy, as the weight selection for removal policy becomes less flexible. On the kernel side, recent studies have proven that the tuning of the configuration parameters of template-based multi-level tiling kernel implementations can yield an extra performance boost. This paper presents AdAPT-S, an autotuning system that generates DNN pruning recipes and optimized kernel configurations to fit an accuracy-to-performance specification. This is done through a cost model that integrates both aspects. AdAPT-S gets extra benefits from the exploitation of layer sensitivity by providing per-layer pruning recipes and kernel configurations. The results show that our approach can achieve superior accuracy-to-performance trade-offs and that this can be used to produce models that fit the user requirements., This research was supported by grants PID2019-104184RBI00 and PID2022-136435NB-I00, funded by MCIN/AEI/10.13039/501100011033, PID2022 also funded by “ERDF Away of making Europe”, EU, the predoctoral grant of Roberto L. Castro (FPU19/03974), and by the Xunta de Galicia cofounded by the European Regional Development Fund (ERDF) under the Consolidation Programme of Competitive Reference Groups (ED431C 2021/30). CITIC, as a center accredited for excellence within the Galician University System and a member of the CIGUS Network, receives subsidies from the Department of Education, Science, Universities, and Vocational Training of the Xunta de Galicia. Additionally, it is co-financed by the EU through the FEDER Galicia 2021-27 operational program (Ref. ED431G 2023/01) Innovation Study ESPLAG has received funding through the Inno4scale project, which is funded by the European High-Performance Computing Joint Undertaking (JU) under Grant Agreement No 101118139. The JU receives support from the EuropeanUnion’s Horizon Europe Programme., Xunta der Galicia; ED431C 2021/30, Xunta de Galicia; ED431G 2023/01
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

VENOM: A Vectorized N:M Format for Unleashing the Power of Sparse Tensor Cores

  • Castro, Roberto L.
  • Ivanov, Andrei
  • Andrade, Diego
  • Ben-Nun, Tal
  • Fraguela, Basilio B.
  • Hoefler, Torsten
© 2023 Autores | ACM. This is the author's version of the work. It is posted here for your personal use. Not for redistribution. The definitive Version of Record was published in International Conference for High Performance Computing, Networking, Storage and Analysis, https://doi.org/10.1145/3581784.3607087, [Abstract]: The increasing success and scaling of Deep Learning models demands higher computational efficiency and power. Sparsification can lead to both smaller models as well as higher compute efficiency, and accelerated hardware is becoming available. However, exploiting it efficiently requires kernel implementations, pruning algorithms, and storage formats, to utilize hardware support of specialized sparse vector units. An example of those are the NVIDIA's Sparse Tensor Cores (SPTCs), which promise a 2× speedup. However, SPTCs only support the 2:4 format, limiting achievable sparsity ratios to 50%. We present the V:N:M format, which enables the execution of arbitrary N:M ratios on SPTCs. To efficiently exploit the resulting format, we propose Spatha, a high-performance sparse-library for DL routines. We show that Spatha achieves up to 37× speedup over cuBLAS. We also demonstrate a second-order pruning technique that enables sparsification to high sparsity ratios with V:N:M and little to no loss in accuracy in modern transformers., This research was supported by the Ministry of Science and Innovation of Spain (grants PID2019-104184RB-I00 and PID2022-136435NB-I00, funded by MCIN/AEI/ 10.13039/501100011033, PID2022 also funded by "ERDF A way of making Europe", EU), the Ministry of Education (predoctoral grant of Roberto L. Castro, FPU19/03974), by Xunta de Galicia under the Consolidation Program of Competitive Reference Groups (ED431C 2021/30), and ERC grant PSAP, no. 101002047. We also acknowledge the support from CITIC, funded by Xunta de Galicia and FEDER funds of the EU (Centro de Investigación de Galicia accreditation 2019-2022, ED431G 2019/01). Finally, we thank the Swiss National Supercomputing Center (CSCS) and the Centro de Supercomputación de Galicia (CESGA) for the use of their computers., Xunta de Galicia; ED431C 2021/30, Xunta de Galicia; ED431G 2019/01
eBiltegia. Repositorio Institucional de Mondragon Unibertsitatea
Publicación Contribución de congreso (ConferenceOutput)

ABLA: an algorithm for repairing structure-based locators through attribute annotations

eBiltegia. Repositorio Institucional de Mondragon Unibertsitatea
Publicación Contribución de congreso (ConferenceOutput)

MAWA: A Browser Extension for Mobile Web Augmentation

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

A microbial perspective of the Southern Ocean

  • Mestre, Mireia
  • Gost, Marc
  • Prior, Alicia
  • Poyatos, Sergio
  • Marín, Camila
  • Hopwood, Mark
  • Piñones, Andrea
  • McNichol, Jesse
  • Fuhrman, Jed A.
  • Logares, Ramiro
  • Krafft, Bjørn A.
  • Díez, Beatriz
  • Fernández, Camila
  • Höfer, Juan
The Southern Ocean (the ocean surrounding Antarctica) is a key component of Earth’s system and has been experiencing drastic changes due to global change. Despite their ecological and biochemical relevance, microbial assemblages in this region remain understudied. During the last years, we explored microorganisms present in this ocean, from the Gerlache Strait to South Georgia Island. We focused on microbes present in the water column, those associated with marine particles, and those linked to key planktonic species such as the Antarctic krill (Euphausia superba) and the increasingly dominant salp (Salpa thompsoni). Salp is replacing krill as water becomes warmer, with consequences for food webs and carbon fluxes. Among microbes, we explored prokaryotes (including bacteria and archaea) and eukaryotes (including protists and fungi) through high-throughput 16S and 18S Rrna gene sequencing. We observed that the Southern Ocean microbes are highly diverse and change drastically in areas influenced by intense glacier melting. We also observed that microbes change latitudinally and from surface to deep waters. Changes in microbial communities were generally linked to water masses variation and ocean circulation, where each water mass harbored specific communities. In krill, each body part harbored different microbial communities that varied more between individuals than across regions, with those from warmer waters hosting more pathogens. All this revealed the high variability of krill microbiome within each swarm, but also their vulnerability to global change. Key microbial taxa in krill included the classes Phyllophraryngea, Gregarinomorphea and Bacteroidia, which were also dominant in S. thompsoni, though both organisms host specific taxa, such as Acidobacteriae (salp) and Oligohymenohorea (krill). As salps replace krill, host microbiomes shift, potentially altering organic matter processing and affecting Southern Ocean biogeochemistry. Overall, we described the highly variable Southern Ocean microbial communities and how climate change affects them, with direct consequences for Antarctic ecosystems., Agencia Nacional de Investigación y Desarrollo (Chile); Instituto Antártico Chileno; Antarctic Science International Bursary; Antarctic Wildlife Research Fund; Ministerio de Ciencia, Innovación y Universidades (España); Consejo Superior de Investigaciones Científicas (España); Ministerio de Educación, Formación Profesional y Deportes (España); Agència de Gestió d'Ajuts Universitaris i de Recerca
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Contribución de congreso (ConferenceOutput)

La infraestructura del transporte romano como patrimonio cultural

  • Romera, Jesús María
  • Pérez Acebo, Heriberto
  • Revilla Cuesta, Víctor
  • Manso Villalaín, Juan Manuel
Trabajo presentado en: R-Evolucionando el transporte, XIV Congreso de Ingeniería del Transporte (CIT 2021), realizado en modalidad online los días 6, 7 y 8 de julio de 2021, organizado por la Universidad de Burgos, El creciente interés por acercar el patrimonio cultural a la sociedad ha impulsado la investigación en el ámbito del transporte durante la época romana. Su objetivo es conocer la organización territorial, las características del comercio y su influencia en la economía y la sociedad a través del tiempo y el impacto de las decisiones políticas en las infraestructuras y el desarrollo económico de los territorios. Estos estudios se apoyan en los mapas confeccionados a partir de los emplazamientos de las ciudades y calzadas históricas. De tal modo que la precisión de sus resultados depende de la fiabilidad de tales cartografías históricas. Sin embargo, todavía persisten un notable número de ciudades y vías romanas sin localizar o cuyas identificaciones actuales no son seguras. En el presente trabajo, se detallan las dificultades inherentes a la identificación de las calzadas romanas, así como las herramientas de las que se dispone para ello. Además, se describe uno de los métodos para localizar rutas antiguas conflictivas en su identificación junto con un caso de estudio. Como resultado, se puede observar la importancia de las estrategias para la reconstrucción de los trazados de las rutas antiguas y la identificación de las ciudades en los estudios de movilidad en el mundo antiguo., Este trabajo ha sido posible gracias al apoyo de la Universidad del País Vasco UPV/EHU (PPGA20/26). Del mismo modo, queremos agradecer la ayuda al Grupo de Investigación del Gobierno Vasco IT1314-19.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Contribución de congreso (ConferenceOutput)

A novel approach to the tail assignment problem in airline planning

  • Fuentes, Manuel
  • Cadarso, Luis
  • Vaze, Vikrant
  • Barnhart, Cynthia
Trabajo presentado en: R-Evolucionando el transporte, XIV Congreso de Ingeniería del Transporte (CIT 2021), realizado en modalidad online los días 6, 7 y 8 de julio de 2021, organizado por la Universidad de Burgos, Combinatorial optimization problems abound in the field of airline planning. Aircraft and passengers fly on networks made up of flights and airports. To schedule aircraft, assignments of fleet types to flights and of aircraft to routes must be determined. The former is known as the fleet assignment problem while the latter is known as the aircraft routing problem in the literature. Aircraft routing is typically addressed as a feasibility problem, the solution to which is required for the construction of crew schedules. All these issues are typically resolved 4 to 6 months before the day of operations. As a result, there is little information available about each aircraft's operational status when making such decisions. The tail assignment problem, which has received little attention in the literature, is solved when additional information about operational conditions is revealed, with the goal of determining each aircraft's route for the day of operations while accounting for the originally planned aircraft routes and crew schedules. As a result, it is a problem that must be resolved closer to the day of operations. We propose a mathematical programming approach based on sequencing that captures all operational constraints and maintenance requirements while minimizing operational costs and schedule changes relative to original plans. The computational experiments are based on realistic cases drawn from a Spanish airline with over 1000 flights and over 100 aircraft., This research was supported by Project Grants TRA2016-76914-C3-3-P by the Ministerio de Economía y Competitividad, Spain, and CAS19/00036 by the Ministerio de Ciencia, Innovación y Universidades, Spain.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Contribución de congreso (ConferenceOutput)

Signal processing and machine learning for air traffic delay prediction

  • Tenorio, Víctor M.
  • García Marqués, Antonio
  • Cadarso, Luis
Trabajo presentado en: R-Evolucionando el transporte, XIV Congreso de Ingeniería del Transporte (CIT 2021), realizado en modalidad online los días 6, 7 y 8 de julio de 2021, organizado por la Universidad de Burgos, As data quality and quantity increase, the prediction of future events using machine learning (ML) techniques across engineering disciplines grows by the day. Air transportation cannot be an exception. Delay prediction is paramount in the aerospace industry, since air traffic delays are responsible for millions of dollars in losses to airlines and passengers, along with negative impacts on the environment. In this contribution, we leverage recent signal processing and ML advances to put forth a processing-and-learning pipeline for the prediction of air traffic delays. The proposed approach is executed in several steps. Firstly, we apply signal processing and data science techniques to filter and denoise the original information. Secondly, we run a descriptive analysis of the data and design new features tailored to the prediction problem. Thirdly, we implement a scheme to select the most informative of those features, contributing to a better generalization performance, and offering useful insights. Two algorithms are used to that end: one based on random forests and one employing a sparse logistic regression approach. Finally, once the features are selected, we implement, analyse, and compare several ML architectures (from classical classifiers to deep learning) to predict the delay. While the focus of the comparison is prediction accuracy, metrics such as sample and computational complexity are also discussed. Numerical experiments are drawn from the US domestic market for the year 2018, when more than 7 million flights between 358 airports were flown. The designed processing/learning pipeline reveals interesting insights and achieves better prediction results than the state of the art. The results confirm that air traffic delay prediction is a challenging problem, mainly because the delay is extremely airport-dependent and the data is highly unbalanced (i.e., only a small percentage of flights are noticeable delayed), and identify worth-pursuing future lines of work., The authors want to thank Sergio Rozada for his help in designing and coding the algorithms used in this publication and the Spanish “Agencia Estatal de Investigación” for the support via Project Grants TRA2016-76914-C3-3-P, PID2019-105032GB-I00, and CAS19/00036 and CAM grant PEJ-2020-AI/TIC-18964.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Contribución de congreso (ConferenceOutput)

Development of a multicriteria scheme for the location and selection of sustainable urban drainage systems in ports

  • Menéndez Suárez-Inclán, Antonio
  • Álvarez Rabanal, Felipe
  • Sañudo Fontaneda, Luis Ángel
  • Allende Prieto, Cristina
  • Roces García, Jorge
Trabajo presentado en: R-Evolucionando el transporte, XIV Congreso de Ingeniería del Transporte (CIT 2021), realizado en modalidad online los días 6, 7 y 8 de julio de 2021, organizado por la Universidad de Burgos, Las infraestructuras de transporte, como los puertos, se enfrentan al desafío de la transición hacia prácticas de gestión sostenible en un contexto de cambio climático. El nexo Energía y Agua es clave para ese propósito como lo señala la Organización Europea de Puertos Marítimos (ESPO) en el informe "Prioridades de los puertos europeos para 2019-2024", centrándose en la necesidad de coherencia y coordinación entre la política de transporte y otras políticas a nivel de la Unión Europea (UE) (Medio Ambiente, Aduanas, Competencia, Energía, Asuntos Marítimos, Investigación). En 2019, 94 puertos de 19 distintos países miembros de la ESPO, han tomado iniciativas de sostenibilidad para reducir la contaminación de agua en los puertos y de este modo proteger la calidad del agua y respetar las normas impuestas por la Directiva Marco del Agua. Los Sistemas Urbanos de Drenaje Sostenible (SUDS) se han convertido en las técnicas de drenaje más utilizadas para adaptar con éxito las áreas urbanas a los escenarios climáticos presentes y futuros. Sin embargo, se han realizado pocas investigaciones sobre la aplicación de SUDS en la infraestructura de transporte relacionada con los puertos, lo que representa una brecha clave en el campo de la gestión de la infraestructura de transporte. Algunos trabajos previos sobre pavimentos permeable (PP) mostraron el potencial para implementar SUDS en terminales portuarias, capturando y filtrando la escorrentía superficial, permitiendo el control del volumen y el tratamiento de contaminantes. Esta investigación presenta un nuevo enfoque para la ubicación y selección del drenaje en los puertos, considerando todos los aspectos del diseño de SUDS dentro de un marco multicriterio (ej.: control de la cantidad de agua, tratamiento de la calidad del agua, biodiversidad y servicios). A su vez, esta investigación demuestra que tipos de SUDS podrían diseñarse y utilizarse en puertos bajo un análisis multicriterio, presentando las principales limitaciones para su implementación., El equipo investigador de este proyecto agradece al Instituto Universitario de Tecnología Industrial de Asturias (IUTA), la Fundación de la Universidad de Oviedo (FUO) y el Ayuntamiento de Gijón, la financiación recibida a través del proyecto SuDS-Ports con referencia SV-19-GIJÓN-1-03; así como a la Fundación para el Fomento en Asturias de la Investigación Científica Aplicada y la Tecnología (FICYT) la financiación con fondos FEDER de la Unión Europea del proyecto con referencia IDI/2018/000221.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Contribución de congreso (ConferenceOutput)

Generalized noncommutative Snyder spaces and projective geometry

  • Gubitosi, Giulia
  • Ballesteros Castañeda, Ángel
  • Herranz Zorrilla, Francisco José
Trabajo presentado en: Corfu Summer Institute 2019 "School and Workshops on Elementary Particle Physics and Gravity" (CORFU2019) - Workshop on Quantum Geometry, Field Theory and Gravity, 31 August - 25 September, Corfù, Greece, Given a group of kinematical symmetry generators, one can construct a compatible noncommutative spacetime and deformed phase space by means of projective geometry. This was the main idea behind the very first model of noncommutative spacetime, proposed by H.S. Snyder in 1947. In this framework, spacetime coordinates are the translation generators over a manifold that is symmetric under the required generators, while momenta are projective coordinates on such a manifold. In these proceedings we review the construction of Euclidean and Lorentzian noncommutative Snyder spaces and investigate the freedom left by this construction in the choice of the physical momenta, because of different available choices of projective coordinates. In particular, we derive a quasi-canonical structure for both the Euclidean and Lorentzian Snyder noncommutative models such that their phase space algebra is diagonal although no longer quadratic., This work has been partially supported by Ministerio de Ciencia, Innovación y Universidades (Spain) under grant MTM2016-79639-P (AEI/FEDER, UE), by Junta de Castilla y León (Spain) under grants BU229P18 and BU091G19. The authors acknowledge the contribution of the COST Action CA18108.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Contribución de congreso (ConferenceOutput)

Study of thermophysical properties of (iodobenzene + alkane) mixtures: from experimentation to molecular interpretation

  • Hevia de los Mozos, Fernando
  • Lozano-Martín, Daniel
  • González López, Juan Antonio
  • Alonso Tristán, Cristina
  • Cobos, Ana .
  • Sanz, Luis Felipe
  • García de la Fuente, Isaías
  • Cobos, José Carlos .
Comunicación presentada en: 13th National and 4th International Conference in Engineering Thermodynamics (13CNIT) "Advances in Engineering Thermodynamics: The Key to Sustainable Development" = 13er Congreso Nacional y 4º Congreso Internacional de Ingeniería Termodinámica (13CNIT) "Avances en Ingeniería Termodinámica : la clave de un desarrollo sostenible". Jaume I University, Castellón de la Plana (Spain), November 29th, 30th and December 1st, 2023, Aromatic halogenated compounds are used in the manufacturing of Li batteries (Jiang et al. [1]), in medicinal chemistry as antidepressant or drugs to reduce cholesterol (Wilcken et al. [2]; Poleto et al. [3]), and in the pharmaceutical industry due to the halogen bonding that they can form (Müller et al [4]). They are found in urban air arising from fuel combustion emissions (Calvert et al. [5]). Thus, it is interesting to study their thermophysical behavior and get a deeper view into their molecular interactions. (Iodobenzene + n-alkane) systems (heptane, decane, dodecane, tetradecane) were investigated in this work in terms of densities (𝜌), speeds of sound (𝑐) and excess molar enthalpies (𝐻m E) at a pressure (𝑝) of 0.1 MPa and the whole composition range (see Section 2). 𝜌 and 𝑐 were measured in the temperature (𝑇) range (288.15 to 308.15) K, whereas 𝐻m E were determined at 𝑇 = 298.15 K. Common excess properties and 𝑇 derivatives were calculated, correlated, and discussed (see Section 3)., This work was supported by Project PID2022-137104NA-I00 funded by MCIN/AEI/10.13039/501100011033/FEDER, UE; and Consejería de Educación de Castilla y León, under Project VA100G19 (Apoyo a GIR, BDNS: 425389).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Contribución de congreso (ConferenceOutput)

SARS-CoV-2 congenital infection and pre-eclampsia-like syndrome in dichorionic twins: A case report and review of the literature

  • Abadía-Cuchí N.
  • Ruiz-Martínez S.
  • Fabre M.
  • Mateo P.
  • Remacha Sienes M.
  • Ventura Faci P.
  • Bueno Sancho J.
  • Benito R.
  • Paules C.
Although the route of transmission of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is mainly respiratory, vertical transmission seems possible.1 We report the case of a woman with a dichorionic diamniotic twin pregnancy admitted to Hospital Clínico Universitario Lozano Blesa at 38+4 weeks of gestation due to severe pre-eclampsia in the context of a SARS-CoV-2 infection (positive nasopharyngeal PCR; Viasure, CerTest Biotec., Zaragoza, Spain) with a probable transplacental transmission of the virus to both twins...
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Contribución de congreso (ConferenceOutput)

Support materials for teaching Electromagnetism

  • Lopez-Torres, A.M.
  • Lobera, J.
  • Sanchez-Azqueta, C.
  • Torcal-Milla, F.J.
This work presents a collection of multimedia materials for teaching electromagnetism in first courses of University degrees. These open access materials aim to apply the theoretical concepts to real environments in order to promote students' learning. One possibility is that the students build a series of simple devices aided by the given audiovisual materials and questions that relate the experimental work done to what they learned in the theoretical lessons. In addition, the multimedia format given to the generated teaching materials allows taking advantage of its properties of accessibility, immediacy and ubiquity to promote autonomous learning of the students.
Docta Complutense
Publicación Contribución de congreso (ConferenceOutput)

Tools for the use of SignWriting as a language resource

  • García Sevilla, Antonio Fernando
  • Díaz Esteban, Alberto
  • Lahoz Bengoechea, José María
Representation of linguistic data is an issue of utmost importance when developing language resources, but the lack of a standard written form in sign languages presents a challenge. Different notation systems exist, but only SignWriting seems to have some use in the native signer community. It is, however, a difficult system to use computationally, not based on a linear sequence of characters. We present the project “VisSE”, which aims to develop tools for the effective use of SignWriting in the computer. The first of these is an application which uses computer vision to interpret SignWriting, understanding the meaning of new or existing transcriptions, or even hand-written images. Two additional tools will be able to consume the result of this recognizer: first, a textual description of the features of the transcription will make it understandable for non-signers. Second, a three-dimensional avatar will be able to reproduce the configurations and movements contained within the transcription, making it understandable for signers even if not familiar with SignWriting. Additionally, the project will result in a corpus of annotated SignWriting data which will also be of use to the computational linguistics community.
Docta Complutense
Publicación Contribución de congreso (ConferenceOutput)

Quevedo: Annotation and processing of graphical languages

  • García Sevilla, Antonio Fernando
  • Díaz Esteban, Alberto
  • Lahoz Bengoechea, José María
In this article, we present Quevedo, a software tool we have developed for the task of automatic processing of graphical languages. These are languages which use images to convey meaning, relying not only on the shape of symbols but also on their spatial arrangement in the page, and relative to each other. When presented in image form, these languages require specialized computational processing which is not the same as usually done either for natural language processing or for artificial vision. Quevedo enables this specialized processing, focusing on a data-based approach. As a command line application and library, it provides features for the collection and management of image datasets, and their machine learning recognition using neural networks and recognizer pipelines. This processing requires careful annotation of the source data, for which Quevedo offers an extensive and visual web-based annotation interface. In this article, we also briefly present a case study centered on the task of SignWriting recognition, the original motivation for writing the software. Quevedo is written in Python, and distributed freely under the Open Software License version 3.0.
Archivo Digital UPM
Publicación Contribución de congreso (ConferenceOutput)

Procedures to qualify PD measuring instruments to use in the insulation condition of cable systems

  • Garnacho Vecino, Fernando|||0000-0002-7752-8810
  • Khamlichi, Abderrahim
  • Ramírez Linares, Ángel
  • Rovira, Jorge
  • Álvarez Gómez, Fernando|||0000-0002-1944-9823
  • Arcones del Álamo, Eduardo|||0000-0002-5205-7792
Archivo Digital UPM
Publicación Contribución de congreso (ConferenceOutput)

Comparing Large-Scale Global Optimization Competition winners in a real-world problem

  • Molina Cabrera, Daniel|||0000-0002-4175-2204
  • Nesterenko, Arthur R.
  • LaTorre de la Fuente, Antonio|||0000-0002-8718-5735
Archivo Digital UPM
Publicación Contribución de congreso (ConferenceOutput)

Accelerating high order discontinuous Galerkin solvers using neural networks: Wall bounded flows

  • Mariño Sánchez, Oscar Ándres|||0000-0003-3143-3813
  • Mayoral Villamartín, David
  • Juanicotena Peña, Adrián
  • Manrique de Lara Lombarte, Fernando
  • Ferrer Vaccarezza, Esteban|||0000-0003-1519-0444
Archivo Digital UPM
Publicación Contribución de congreso (ConferenceOutput)

New Composites Based on Magnetic Nanoparticles and Polidopamine

  • Montejano Nares, Elena
  • García Armada, María Pilar|||0000-0003-2410-3365
  • Molina, Paz
  • Rodríguez Arriaga, Laura
  • Climent Pascual, Esteban|||0000-0003-3492-8942
Archivo Digital UPM
Publicación Contribución de congreso (ConferenceOutput)

Magnetic CoFe2O4 ferritesfor PMS activation for disinfection of wastewater

  • Rodríguez Chueca, Jorge Jesús|||0000-0001-9050-1682
  • Barahona-García, E.
  • Blanco Gutiérrez, Verónica|||0000-0002-0619-389X
  • Dos Santos García, Antonio Juan|||0000-0002-5660-1097
Archivo Digital UPM
Publicación Contribución de congreso (ConferenceOutput)

Optimization of operating conditions in the activation of peroxymonosulfato and H2O2 for Enterococcus sp. inactivation: water matrix effect

  • Guerra Rodríguez, Sonia|||0000-0001-9367-0393
  • Rodríguez Chueca, Jorge Jesús|||0000-0001-9050-1682
  • Rodríguez Hurtado, María Encarnación|||0000-0002-2077-8915
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

A semi-supervised learning approach to study the energy consumption in smart buildings

  • Quintero Gull, Carlos
  • Aguilar Castro, José Lisandro|||0000-0003-4194-6882
  • Rodríguez Moreno, María Dolores|||0000-0002-7024-0427
IEEE Symposium Series on Computational Intelligence (IEEE SSCI 2021), 05/12/2021-07/12/2021., In this work, we use the semi-supervised LAMDA-HSCC algorithm for characterizing the energy consumption in smart buildings, which can work with labeled and unlabeled data. Particularly, it uses the LAMDA-RD approach for the clustering problem and the LAMDA-HAD approach for the classification problem. Additionally, this algorithm uses three submodels for merging, partition groups (classes/cluster) and migrating individuals from a group to another. For the performance evaluation, several datasets of energetic consumption are used, with different percent of labeled data, showing very encouraging results according to two metrics in the semi-supervised context., European Commission, Agencia Estatal de Investigación, Junta de Comunidades de Castilla-La Mancha
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Autonomous cycle of data analysis tasks for scheduling the use of controllable load appliances using renewable energy

  • Aguilar Castro, José Lisandro|||0000-0003-4194-6882
  • Giraldo, Juan
  • Zapata, Manuela
  • Jaramillo, Andrés
  • Zuluaga, Luis
  • Rodríguez Moreno, María Dolores|||0000-0002-7024-0427
International Conference on Computational Science and Computational Intelligence, 15/12/2021-17/12/2021, Estados Unidos., With the arrival of smart edifications with renewable energy generation capacities, new possibilities for optimizing the use of the energy network appear. In particular, this work defines a system that automatically generates hours of use of the controllable load appliances (washing machine, dishwasher, etc.) within these edifications, in such a way that the use of renewable energy is maximized. To achieve this, we are based on the hypothesis that depending on the climate, a prediction can be made of how much energy will be generated and, according to the behavior of the users, the energy demand required by these appliances. Following this hypothesis, we build an autonomous cycle of data analysis tasks composed of three tasks, two tasks for estimating the required load (demand) and the renewable energy produced (supply), coupled with a scheduling task to generate the plans of use of appliances. The results indicate that it is possible to carry out optimal scheduling of the use of appliances, but that they depend on the quality of the predictions of supply and demand., European Commission, Agencia Estatal de Investigación, Junta de Comunidades de Castilla-La Mancha
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

A multi-label approach for diagnosis problems in energy systems using LAMDA algorithm

  • Quintero Gull, Carlos
  • Aguilar Castro, José Lisandro|||0000-0003-4194-6882
  • Rodríguez Moreno, María Dolores|||0000-0002-7024-0427
2022 IEEE International Conference on Fuzzy Systems (FUZZ-IEEE), 18-23 July 2022, Italia., In this paper, we propose a supervised multilabel algorithm called Learning Algorithm for Multivariate Data Analysis for Multilabel Classification (LAMDA-ML). This algorithm is based on the algorithms of the LAMDA family, in particular, on the LAMDA-HAD (Higher Adequacy Grade) algorithm. Unlike previous algorithms in a multi-label context, LAMDA-ML is based on the Global Adequacy Degree (GAD) of an individual in multiple classes. In our proposal, we define a membership threshold (Gt), such that for all GAD values above this threshold, it implies that an individual will be assigned to the respective classes. For the evaluation of the performance of this proposal, a solar power generation dataset is used, with very encouraging results according to several metrics in the context of multiple labels., European Commission, Agencia Estatal de Investigación, Junta de Comunidades de Castilla-La Mancha
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Artificial neural network based thermal model for a three-phase medium frequency transformer

  • Molinero Blanco, David
  • Santamargarita Mayor, Daniel|||0000-0003-3848-5886
  • Bueno Peña, Emilio José|||0000-0003-0401-4576
  • Marrón Romera, Marta|||0000-0001-7723-2262
  • Vasic Matic, Miroslav
32nd IEEE International Symposium on Industrial Electronics, 19/06/2023-21/06/2023, Helsinki, Finland., This paper proposes an Artificial Neural Network (ANN) as a method to thermally analyze a three-phase medium frequency transformer (MFT). This transformer is part of a 50kW three-phase Dual Active Bridge (DAB). After choosing the most suitable architecture for the ANN, it is trained with the results of finite element method (FEM) simulations that model its behavior. The ANN is thus able to calculate temperature increments of the core and of each winding with high reliability. This performance of the ANN is studied by comparing its results with some other from widely used state-of-the-art theoretical thermal models that emulate the transformer?s thermal behavior. The neural network-based solution is proved to be as accurate as the FEM simulations ground truth, and as fast to apply as the theoretical thermal model, therefore fusing the advantage of using any of these two in power converter design optimization., Junta de Comunidades de Castilla-La Mancha, Universidad de Alcalá