Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 36
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Exploring Visual Cues for Intuitive Communicability of Touch Gestures to Pre-kindergarten Children

  • Nácher Soler, Vicente Ernesto
  • Catalá Bolós, Alejandro
  • Jaén Martínez, Francisco Javier|||0000-0002-8815-9643
Pre-kindergarten children are becoming frequent users of multi-touch technology and, according to previous studies they are able to perform several multi-touch gestures successfully. However, they do not use these devices supervised at all times. Consequently, interactive applications for pre-kindergarteners need to convey their underlying design intent and interactive principles with respect to touch interaction. In this paper, we present and evaluate two approaches to communicate three different touch gestures (tap, drag and scale up) to pre-kindergarten users. Our results show, firstly, that it is possible to effectively communicate them using visual cues and, secondly, that an animated semiotic approach is better than an iconic one., Work supported by the MINECO (grant TIN2010-20488) and GVA VALi+d program (grant APOSTD/2013/013).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Multi-Display Environments to Foster Emotional Intelligence in Hospitalized Children

  • García Sanjuan, Fernando
  • Catalá Bolós, Alejandro
  • Jaén Martínez, Francisco Javier|||0000-0002-8815-9643
Long-term and frequent hospitalized children are under high loads of emotional stress, which affects their well-being in addition to the illness they are suffering. This thesis proposes and will focus on an approach to use Multi-Display Environments (MDE) in pediatric hospitalization contexts to improve patients’ emotional intelligence so they can deal with the negative emotions produced by their situation., This work is supported by Spanish MINECO (TIN2010-20488 and TIN2014-60077-R), from Universitat Politècnica de València (UPV-FE-2014-24), and from GVA (APOSTD/2013/013 and ACIF/2014/214).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Recommending Learning Videos for MOOCs and Flipped Classrooms

  • Jordán, Jaume|||0000-0003-0400-9136
  • Valero Cubas, Soledad|||0000-0003-4565-326X
  • Turró Ribalta, Carlos|||0000-0002-3840-9405
  • Botti V.|||0000-0002-6507-2756
[EN] New teaching approaches are emerging in higher education, such as flipped classrooms. In addition, academic institutions are offering new types of training like Massive Online Open Courses. Both of these new ways of education require high-quality learning objects for their success, with learning videos being the most common to provide theoretical concepts. This paper describes a hybrid learning recommender system based on content-based techniques, which is able to recommend useful videos to learners and teachers from a learning video repository. This hybrid technique has been successfully applied to a real scenario such as the central video repository of the Universitat Politècnica de València., This work was partially supported by MINECO/FEDER RTI2018-095390-B-C31 and TIN2017-89156-R projects of the Spanish government, and PROMETEO/2018/002 project of Generalitat Valenciana. J. Jordán and V. Botti are funded by UPV PAID-06-18 project. J. Jordán is also funded by grant APOSTD/2018/010 of Generalitat Valenciana - Fondo Social Europeo.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Developing a depth-based tracking systems for interactive playful environments with animals

  • Pons Tomás, Patricia
  • Catalá Bolós, Alejandro
  • Jaén Martínez, Francisco Javier|||0000-0002-8815-9643
[EN] Digital games for animals within Animal Computer Interaction are usually single-device oriented, however richer interactions could be delivered by considering multimodal environments and expanding the number of technological elements involved. In these playful ecosystems, animals could be either alone or accompanied by human beings, but in both cases the system should react properly to the interactions of all the players, creating more engaging and natural games. Technologically-mediated playful scenarios for animals will therefore require contextual information about the game participants, such as their location or body posture, in order to suitably adapt the system reactions. This paper presents a depth-based tracking system for cats capable of detecting their location, body posture and field of view. The proposed system could also be extended to locate and detect human gestures and track small robots, becoming a promising component in the creation of intelligent interspecies playful environments., Work supported by the Spanish Ministry of Economy and Competitiveness and funded by the EDRF-FEDER (TIN2014-60077-R). The work of Patricia Pons has been supported by a national grant from the Spanish MECD (FPU13/03831). Alejandro Catalá also received support from a VALi+d fellowship from the GVA (APOSTD/2013/013). Special thanks to our cat participants, their owners, and our feline caretakers and therapists
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Protocol Analysis with Time

  • Aparicio-Sánchez, Damián
  • Meadows, Catherine
  • Meseguer, José
  • Escobar Román, Santiago|||0000-0002-3550-4781
  • Sapiña-Sanchis, Julia|||0000-0003-2994-6986
[EN] We present a framework suited to the analysis of cryptographic protocols that make use of time in their execution. We provide a process algebra syntax that makes time information available to processes, and a transition semantics that takes account of fundamental properties of time. Additional properties can be added by the user if desirable. This timed protocol framework can be implemented either as a simulation tool or as a symbolic analysis tool in which time references are represented by logical variables, and in which the properties of time are implemented as constraints on those time logical variables. These constraints are carried along the symbolic execution of the protocol. The satisfiability of these constraints can be evaluated as the analysis proceeds, so attacks that violate the laws of physics can be rejected as impossible. We demonstrate the feasibility of our approach by using the Maude-NPA protocol analyzer together with an SMT solver that is used to evaluate the satisfiability of timing constraints. We provide a sound and complete protocol transformation from our timed process algebra to the Maude-NPA syntax and semantics, and we prove its soundness and completeness. We then use the tool to analyze Mafia fraud and distance hijacking attacks on a suite of distance-bounding protocols., This paper was partially supported by the EU (FEDER) and the Spanish MCIU under grant RTI2018-094403-B-C32, by the Spanish Generalitat Valenciana under grant PROMETEO/2019/098 and APOSTD/2019/127, by the US Air Force Office of Scientific Research under award number FA9550-17-1-0286, and by ONR Code 311.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Transcranial acoustic holograms for arbitrary fields generation using focused ultrasound into the brain

  • Jiménez-Gambín, Sergio
  • Jimenez, Noe|||0000-0002-6539-670X
  • Benlloch Baviera, Jose María|||0000-0001-6073-1436
  • Camarena Femenia, Francisco|||0000-0002-6713-1414
[EN] We present 3D printed holographic lenses that correct the aberrations of the skull and, simultaneously, produce arbitrary ultrasonic fields with the geometry of brain structures. Using experimental techniques on a human skull phantom (HSP), a multiple-point focusing lens is designed to focus at both human hippocampi at once; a beam following an arbitrary curved trajectory, i.e., a self-bending beam; and a holographic plate producing a broad focus that overlaps with the left hippocampus (LH). Skull and LH geometries and acoustic properties are obtained from CT-scans and MRI, respectively. Time-reversal (TR) method is used to obtain the magnitude and phase of the back-propagated field from the target shape towards the lens surface. The holographic lenses are designed assuming each pixel of the lens vibrates as a Fabry-Pérot resonator. The resulting lenses are 3D printed using SLA techniques. The three studied cases show similar results in simulation and experiment with and without the HSP: for the bi-focal beam, the reconstructed field accurately matches the target foci; for the curved trajectory beam, the target acoustic image is reconstructed by the designed holographic lens; for the broad focus beam, results present the same qualitative performance providing a similar overall covering of the LH. The reported holographic lenses can be used to control the spatial features of ultrasonic beams inside the skull in an unprecedented manner using single-element ultrasonic sources., This work was supported by Generalitat Valenciana through grants APOSTD/2017/042, ACIF/2017/045 and GV/2018/11. FC acknowledges financial support from Agencia Valenciana de la Innovacio through grant INNCON00/18/9 and European Regional Development Fund (IDIFEDER/2018/022).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Calcium sulfate setting monitoring with ultrasonic backscattering analysis

  • Rodríguez-Sendra, Josep|||0000-0001-5344-6602
  • Jimenez, Noe|||0000-0002-6539-670X
  • Picó Vila, Rubén|||0000-0003-3537-9658
  • Camarena Femenia, Francisco|||0000-0002-6713-1414
  • Faus, Joan
[Otros] Ultrasonic backscattering techniques are used to monitor the setting process of calcium sulfate. A 3.5 MHz frequency A-scan pulse-echo system is used to obtain the acoustic properties of a cylindrical sample of calcium sulfate (diameter= 36 mm; thickness= 18 mm). The temperature of the sample and the rf backscattering signal are measured every two seconds during the whole setting process (53 min; 1590 rf-signals). Apparent backscattering integral (AIB) [1], Nakagami parameter [2] and sound speed are calculated from each measured rf signal. A positive correlation is observed between the sound velocity, the AIB and the Nakagami parameter during the setting process, identifying three states of the sample: liquid, transient and solid. Sound velocity changes from 1480 m/s (liquid) to 2700 m/s (solid), meanwhile AIB changes between -15 dB and 0 dB. In the transient phase, the three parameters are sensible to the fast change in the mechanical properties of the medium. The presented results show that, by performing backscattering analysis, the state of a sample in a setting process can be determined, which could have application in monitoring changes in guided bone regeneration processes for dental implant procedures.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Fusibles estructurales para evitar la propagación de fallos en las cimbras de edificación

  • Buitrago, Manuel|||0000-0002-5561-5104
  • Calderón García, Pedro Antonio|||0000-0002-9783-9333
  • Moragues, Juan J|||0000-0001-8111-5480
  • Oliver-Cano, Marina
  • Adam, Jose M|||0000-0002-9205-8458
[ES] La construcción de edificios con estructura de hormigón armado se realiza, habitualmente, con la ayuda de puntales metálicos que se encargan de transmitir las cargas de las plantas recién hormigonadas a las inferiores. Los principales problemas que presenta el empleo de puntales son: a) la aparición de cargas superiores a las previstas en los puntales, pudiendo provocar el colapso de toda la cimbra o incluso del edificio, b) la heterogeneidad de las cargas que reciben los puntales de una misma planta cimbrada, y c) la limitada variedad de puntales de que disponen las casas comerciales. Todo ello obliga a que, en la mayor parte de las ocasiones, los puntales empleados en las obras estén claramente sobredimensionados. En este artículo se presenta el fusible estructural para el control de la carga de los puntales (también llamado limitador de carga o LL por sus siglas en inglés), que fue desarrollado en ICITECH a partir de estudios teóricos avanzados, una intensa campaña experimental y la ejecución de una prueba de concepto. El artículo se compone de: 1) una breve recopilación de los trabajos experimentales y de validación computacional llevados a cabo; y 2) el estudio realizado con simulación numérica avanzada para evaluar y cuantificar la posible mitigación del daño y el riesgo de fallo de estructuras de edificios durante su construcción. De los resultados obtenidos se puede afirmar que con el uso de LLs se consigue una mejora: de la seguridad, frente a fallos locales de la cimbra cuyas consecuencias podrían propagarse de forma desproporcionada; de la eficiencia estructural, con una mayor uniformidad en las cargas que reciben los puntales; y de los costes del sistema de apuntalamiento., Los autores quieren expresar su gratitud a todas las entidades por la financiación recibida (FPU13/02466; PRX17/00302; GV/2015/063; APOSTD/2019/101; 101000396; IJC2020- 042642-I), así como a las empresas Encofrado J. Alsina S.A. y Levantina, Ingeniería y Construcción S.L. por su invalorable cooperación.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Tests on a Full-Scale Precast Building for Robustness Assessment

  • Makoond, Nirvan Chandra|||0000-0002-5203-6318
  • Buitrago, Manuel|||0000-0002-5561-5104
  • Adam, Jose M|||0000-0002-9205-8458
[EN] As modern society faces unprecedented challenges related to climate stability and conflict, the need to design more sustainable and resilient buildings is undeniable. Several studies show that building with precast concrete components can result in significant advantages with respect to sustainability. However, the fact that such structures exhibit clear lines of weakness at the joints between elements can make them more vulnerable to progressive collapse. Although this can be overcome by adequate detailing of connections, there exist several uncertain factors which may affect the interaction between different precast elements and the global behaviour of such structural systems. This means that experimental testing is usually required for safe development of adequate solutions. Despite this fact, there have been very few studies on the robustness of precast concrete structures when compared to research on cast-in-place and steel structures. As such, this work presents the results of an ambitious experimental campaign involving the sudden removal of 3 different columns from a specifically built 15 m x 12 m two-storey precast concrete building incorporating simple and practical solutions to enhance robustness., This article is part of a project (Endure) that has received funding from the European Research Council (ERC) under the European Union¿s Horizon 2020 research and innovation programme (Grant agreement No. 101000396). The authors would like to acknowledge the funding received through grant BIA2017-88322-R-AR funded by MCIN/AEI/ 10.13039/501100011033 and ¿ERDF A way of making Europe¿. The authors would also like to express their gratitude for funding received under the postdoctoral programs of Generalitat Valenciana/European Social Fund [APOSTD/2019/101] and grant IJC2020-042642-I funded by MCIN/AEI/ 10.13039/501100011033 and by ¿European Union NextGenerationEU/PRTR¿. The help and support provided by Ayman El-Fouly (Applied Science International) for performing simulations in ELS is also gratefully acknowledged. Finally, the authors are also grateful for the invaluable cooperation of the Levantina, Ingeniería y Construcción S.L. (LIC) company, and the contribution of members and collaborators of the Building Resilient research group.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Large-Scale Tests on RC Purpose-Built Buildings for Improving Robustness

  • Buitrago, Manuel|||0000-0002-5561-5104
  • Makoond, Nirvan Chandra|||0000-0002-5203-6318
  • Adam, Jose M|||0000-0002-9205-8458
  • Mezquida-Alcaraz, Eduardo J.
[EN] Although recent years have been marked by a substantial research effort on the progressive collapse of steel as well as cast-in-place and precast concrete structures, the fact is that almost all studies are focused on reduced-scale tests, tests on isolated frame structures, tests on substructures or analytical and numerical analysis. Within this context, large-scale tests avoid size effects and allow all resisting mechanisms that a structure can develop after an initial-local failure to be studied. This paper presents the case of large-scale tests performed on two purpose-built buildings: one made of cast-in-place concrete and the other with precast concrete elements. In both cases, sudden column removal scenarios were considered for the robustness assessment of the structural system. The structures were provided with simple solutions to enhance the robustness and arrest progressive collapse initiated by the sudden failure of a column. The cast-in-place concrete building had two 3 m high floors, with 2 × 2 bays of 5 m span length. The total in-plan dimensions of the building were 10 × 10 m2. This building was subjected to sudden corner column failure scenarios with and without the presence of infill masonry walls. The precast concrete structure also had two 3 m high floors, with 3 × 2 bays of 5 m and 6 m span, respectively. The total in-plan dimensions of the building were 15 × 12 m2. This building was subjected to sudden column failure scenarios for three different tests, involving the removal of: a corner column, an edge column in a frame parallel to the direction of one-way hollow-core slabs, and an edge column in a frame perpendicular to the one-way slabs. This paper presents and discusses a summary of the results and outcomes of these studies., The work for the cast-in-place concrete building was carried out with the support of a 2017 Leonardo Grant for Researchers and Cultural Creators from the BBVA Foundation. The work for the precast concrete building was carried out with the funding received through grant BIA2017-88322-R-AR funded by MCIN/AEI/10.13039/501100011033 and ERDF A way of making Europe. This research also serves as the basis of a project (Endure) that has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (Grant Agreement No. 101000396). The authors would also like to express their gratitude to the Levantina, Ingeniería y Construcción S.L. (LIC) company for funding the construction of the building, and to the Generalitat Valenciana/Fons Social Europeu [APOSTD/2019/101], grant IJC2020-042642-I funded by MCIN/AEI/10.13039/501100011033 and by European Union NextGeneration EU/PRTR, and Universitat Politècnica de València [PAID-10-17] for funding received under different postdoctoral programs.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Variant-based Equational Unification under Constructor Symbols

  • Aparicio-Sánchez, Damián
  • Escobar Román, Santiago|||0000-0002-3550-4781
  • Sapiña-Sanchis, Julia|||0000-0003-2994-6986
[EN] Equational unification of two terms consists of finding a substitution that, when applied to both terms, makes them equal modulo some equational properties. A narrowing-based equational unification algorithm relying on the concept of the variants of a term is available in the most recent version of Maude, version 3.0, which provides quite sophisticated unification features. A variant of a term t is a pair consisting of a substitution sigma and the canonical form of tsigma. Variant-based unification is decidable when the equational theory satisfies the finite variant property. However, this unification procedure does not take into account constructor symbols and, thus, may compute many more unifiers than the necessary or may not be able to stop immediately. In this paper, we integrate the notion of constructor symbol into the variant-based unification algorithm. Our experiments on positive and negative unification problems show an impressive speedup.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Introduction of a practical lesson for the evaluation of bioactive quality in plant materials addressed to students in Plant Breeding

  • Guijarro-Real, Carla
  • Plazas Ávila, María de la O|||0000-0001-8090-7312
  • Gramazio, Pietro|||0000-0003-2226-7999
  • Adalid-Martinez, Ana Maria|||0000-0002-3927-1348
  • Prohens Tomás, Jaime|||0000-0003-1181-9065
  • Rodríguez Burruezo, Adrián|||0000-0002-4530-8071
  • Fita, Ana|||0000-0002-8637-5852
[EN] According to the new market trends, one of the goals in many modern breeding programmes is the development of varieties with enhanced bioactive properties. Despite the importance of evaluating the content of specific molecules, the analysis of the broad antioxidant capacity is often suitable. For instance, if the goal is to evaluate large quantity of materials, or even to compare different agronomical practices to obtain the highest antioxidant properties. Thus, studies related to plant breeding should include subjects related to the knowledge of analytical methods for the evaluation of the bioactive properties in the materials tested. Theoretical lessons establish the basis for understanding the importance of bioactive properties and the influence of stresses in their content. Nevertheless, practical sessions complement this knowledge and improve the competence of future professionals, providing them a tool for the evaluation of bioactive quality in developing breeding materials. We consider therefore that this competence should be acquired during the Master degree in Plant Breeding offered by our institute. Thus, we propose to introduce a practical lesson in the mandatory subject "Instrumental Techniques" aimed to the comparison of two analytical methods for the analysis of bioactive properties. As plant material, we will use water celery, an herbaceous species with great antioxidant properties. The methodology will include the analysis of the antioxidant activity with the DPPH method and the content in total phenolics, both spectrophotometric methods but measuring different aspects of the bioactive quality. The lesson is divided in three sessions of three hours each, in the course of which students will perform all steps for these analyses, including sample preparation, extraction of bioactive molecules, preparation of the calibration curve, and analysis of results. This practical lesson provides students with the competence to evaluate the antioxidant activity of high number of materials using quick and simple spectrophotometric methodologies, and to deal with real problems such as the need of dilution for samples with very high content of bioactive molecules. Moreover, the practical lesson provides the guidelines to adapt the protocols for different materials and consequently to many breeding programmes, and can be also adapted for food technology students., Carla Guijarro-Real is grateful to the Ministerio de Educación, Cultura y Deporte of Spain (MECD) for a predoctoral FPU grant (FPU14-06798). Mariola Plazas is grateful to Generalitat Valenciana and Fondo Social Europeo for a post-doctoral grant (APOSTD/2018/014). Pietro Gramazio is grateful to Universitat Politècnica de València for a post-doctoral contract (PAID-10-18) within the Programa de Ayudas de Investigación y Desarrollo initiative. Ana M Adalid-Martínez is grateful to the Ministerio de Ciencia, Innovación y Universidad of Spain for its support with a post-doctoral contract (PTA2015- 11502-I) within the Subprograma Personal Técnico de Apoyo initiative.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Developing experimental design and analysis skills in Biomedical Engineering. A laboratory experiment proposal

  • Del-Canto, Irene
  • Morales-Tatay, José Manuel
  • Moratal, David|||0000-0002-2825-3646
[EN] Learning-teaching process in the area of Biomedical Engineering requires the acquisition of skills related to the formulation and resolution of problems in biology and medicine through the use of innovative technologies, and the ability to effectively use biomedical instrumentation and the processing and analyzing methods for studying the complex systems and processes of the human body. In order to deepen the acquisition of some omics-related disciplines, the objective of the present work is the development of a laboratory experiment in the field of molecular imaging, whose purpose is the metabolomic study (acquisition and data processing) of biological samples by Nuclear Magnetic Resonance (NMR) spectroscopy. The proposed laboratory experiment is carried out in groups of 15 students and it is structured in two different sessions. The first session is held at the facilities of the Molecular and Metabolomic Imaging Laboratory of the Unitat Central d¿Investigació de Medicina of University of Valencia, and during the session each student performs the sample collection and treatment of their own biological sample (urine), whose metabolomic study is desired, following the appropriate laboratory protocol. After preparation, the acquisition of the NMR spectra corresponding to each of the samples is carried out. All students introduce their samples into the NMR spectrometer and observe the different phases of the acquisition process (frequency tuning and matching, sequence specification, pulse calculation, etc.) to obtain the NMR spectrum. In the second session, which takes place in a computer classroom of the Universitat Politècnica de València, the purpose is the use of different methods of analysis and observation to identify and quantify the metabolites from the NMR spectra acquired during the first session. Firstly, signal processing techniques are used to process the NMR spectra (phase correction, baseline correction and spectrum reference), and then a total of 10 selected metabolites contained in the urine are quantified, using specific software for its application to the field of metabolomics. Finally, the students create a table that collects the data of the subjects (themselves, anonimized) and metabolite concentration, and perform the multivariate statistical analysis: principal component analysis (PCA) and partial least squares discriminant analysis (PLSDA). Through the performed analysis, each student establishes one metabolic profile and obtains conclusions from it, such as the determination of a characteristic metabolomic fingerprint associated with variables such as the sex of the person providing the sample, or the determination of a smoker profile, among others. Through the completion of the proposed laboratory experiment, students will acquire general and specific outcomes in the Biomedical Engineering field: 1) implementation and management of adequate experiments (preparation of biological samples), 2) use of innovative technologies (process of acquisition of NMR spectra), 3) application of scientific methods to perform the analysis of data (signal processing), 4) selection and performance of observation methods (statistical analysis) to assess the results and build conclusions, 5) to carry out a simple metabolic study that allows to verify the metabolic impact of some variable as smoking, and 6) to propose new working hypotheses based on the results obtained and expected results., This work was supported by Conselleria d¿Educació of Generalitat Valenciana [grants number GV/2018/111 and APOSTD/2018/181] and Instituto de Salud Carlos III-FEDER (Fondo Europeo de Desarrollo Regional) [grant number CB16/11/00486].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Introduction and development of a practical lesson for improving the competence of Master students in Plant Breeding: The usefulness of specific software in phenotyping tasks

  • Guijarro-Real, Carla
  • Gramazio, Pietro|||0000-0003-2226-7999
  • Plazas Ávila, María de la O|||0000-0001-8090-7312
  • Adalid-Martinez, Ana Maria|||0000-0002-3927-1348
  • Rodríguez Burruezo, Adrián|||0000-0002-4530-8071
  • Prohens Tomás, Jaime|||0000-0003-1181-9065
  • Fita, Ana|||0000-0002-8637-5852
[EN] An essential step in many plant breeding programmes is the morphoagronomic phenotyping of the materials that are being developed, using standardized descriptors or, when not available, as it is the case of new crops, consensus guidelines to characterize them. Although many of the traits must be evaluated in the field, those related to the shape and size of leaves and fruits can be easily measured with specific software using digital pictures. This tool provides several advantages, including: 1) more accurate and objective measurements; 2) the possibility of measuring other traits of interest such as area or perimeter, that in other case would not be easily evaluated; or even 3) the possibility of delaying the analysis of pictures in order to focus on field traits. Therefore, the knowledge and management of this tool can become of high usefulness. The Plant Breeding Master offered by our institute is aimed at training professionals able to improve crops and develop new ones according to market trends, in addition to improve adaptation and resistance to biotic and abiotic stresses. Due to the importance of phenotyping considering any of the above breeding goals, in this paper we propose the introduction of a practical session in the mandatory subject "Instrumental Techniques": the management and comparison of adequacy of two specific software tools considering the material to be analyzed. As material, we propose a collection of pepper varieties for analysis of fruits, and a collection of rocket (Eruca and Diplotaxis spp.) germplasm for analysis of leaves, due to the broad variability observed in those materials. The MorphoLeaf v1.0 software will be used for the analysis of leaves, and the Tomato Analyzer 3.0 software will be used for the analysis of fruits and also for leaves. According to the design of the practical lesson, only one session of three hours is required, in which students will learn to properly digitalize materials considering the restrictions of each software and material used, and to obtain all the information needed in each case. In addition, there will be one hour of autonomous work in which both tools and the results obtained will be compared by the students, and a report will be prepared. This practical lesson allows students to acquire the competence for the correct use of different computer tools in the phenotyping task. The comparison of analyses using different scan adjustments and software will allow students to understand the disadvantages of each option and problems that could occur, in order to minimize them. In summary, this practical lesson gives a tool for improving the future phenotyping works of students during their careers, teaching them to consider the best software prior to analysis in order to improve the digitalizing step according to software restrictions, and to obtain more accurate information with a reduction of working time, thus increasing efficiency., Carla Guijarro-Real is grateful to the Ministerio de Educación, Cultura y Deporte of Spain for a predoctoral FPU grant (FPU14-06798). Pietro Gramazio is grateful to Universitat Politècnica de València for a post-doctoral contract (PAID-10-18) within the Programa de Ayudas de Investigación y Desarrollo initiative. Mariola Plazas is grateful to Generalitat Valenciana and Fondo Social Europeo for a post-doctoral grant (APOSTD/2018/014). Ana M Adalid-Martínez is grateful to the Ministerio de Ciencia, Innovación y Universidad of Spain for its support with a post-doctoral contract (PTA2015- 11502-I) within the Subprograma Personal Técnico de Apoyo initiative.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Intelligent Playful Environments for Animals

  • Pons Tomás, Patricia
  • Catalá Bolós, Alejandro
  • Jaén Martínez, Francisco Javier|||0000-0002-8815-9643
We are evolving towards an interconnected and ubiquitous world, where digital devices and interfaces progressively adapt themselves to fit our needs and ease our daily activities. Although we coexist with plenty of animal species, such as our pets, we are approaching the evolution of technology in a strictly human-centric manner. A new field in Computer Science, called Animal-Computer Interaction (ACI), aims at filling this technological gap by developing systems and interfaces specifically designed for animals. Supporting animals' natural behavior and habits with suitable technology could improve both humans and animals' wellbeing. As a consequence, this doctoral research aims to explore, design and develop animal-centered intelligent systems that focus on enhancing one of the most natural animal behaviors: play. Therefore, the main goal of this research is to expand ACI with the ability of automatically manage and adapt animals play activity in order to improve their wellbeing., Work supported by MINECO (TIN2010-20488 and TIN2014-60077-R), UPV (UPV-FE-2014-24), MECD (FPU13/03831) and GVA (APOSTD/2013/013).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Load Generators for Automatic Simulation of Urban Fleets

  • Martí, Pasqual|||0000-0001-6406-0641
  • Jordán, Jaume|||0000-0003-0400-9136
  • Palanca Cámara, Javier|||0000-0002-6209-9603
  • Julian, Vicente|||0000-0002-2743-6037
[EN] To ensure cities sustainability, we must deal with, among other challenges, traffic congestion, and its associated carbon emissions. We can approach such a problem from two perspectives: the transition to electric vehicles, which implies the need for charging station infrastructure, and the optimization of traffic flow. However, cities are complex systems, so it is helpful to test changes on them in controlled environments like the ones provided by simulators. In our work, we use SimFleet, an agent-based fleet simulator. Nevertheless, SimFleet does not provide tools for easily setting up big experiments, neither to simulate the realistic movement of its agents inside a city. Aiming to solve that, we enhanced SimFleet introducing two fully configurable generators that automatize the creation of experiments. First, the charging stations generator, which allocates a given amount of charging stations following a certain distribution, enabling to simulate how transports would charge and compare distributions. Second, the load generator, which populates the experiment with a given number of agents of a given type, introducing them dynamically in the simulation, and assigns them a movement that can be either random or based on real city data. The generators proved to be useful for comparing different distributions of charging stations as well as different agent behaviors over the same complex setup., This work was partially supported by MINECO/FEDER RTI2018-095390-B-C31 project of the Spanish government. Pasqual Martí and Jaume Jordán are funded by UPV PAID-06-18 project. Jaume Jordán is also funded by grant APOSTD/2018/010 of Generalitat Valenciana - Fondo Social Europeo.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Development of Inductive Sensor for Control Gate Opening of an Agricultural Irrigation System

  • Basterrechea-Chertudi, Daniel Andoni
  • Parra-Boronat, Lorena
  • Rocher, Javier|||0000-0003-0182-1671
  • Lloret, Jaime|||0000-0002-0862-0533
[EN] The monitoring of water level in the agriculture irrigation channels is essential to control the opening gates of these channels. In this way, WSNs (Wireless Sensor Networks) have high relevance to obtain this kind of data. In this paper, we propose a sensor to measure the depth changes in irrigation channels to control the gates opening. It is connected to an Adafruit Feather HUZZAH based on ESP8266, which allows us to build a mobile edge computing system. The developed sensor is based on two coils. Sinus-wave powers the first one, and the second is induced. The coils are winding over a polyvinyl chloride (PVC) that has high resistance for corrosion and low price. Besides, we use copper wire as a conductive metal. We test two different configurations of coils. P1 has five spires for the powered coil (PC) and ten spires for the induced coil (IC). On the other hand, P2 has 40 spires for the PC and 80 spires for the IC. The two prototypes were coiled in one layer. Then, both sensors are tested using a glass bottle where the water column increased with the target to obtain the information of the depth. In both prototypes, the difference of voltage between the maximum and minimum studied depths is more or less the same, 4.46V for P1 and 4.44V for P2. Nevertheless, during the stabilization test, the P1 showed better adaptation for the turbulences than the P2. The P1 shows an oscillation of 0.48V, where the P2 has a maximum fluctuation of 3.2V., This work has been partially supported by European Union through the ERANETMED (Euromediterranean Cooperation through ERANET joint activities and beyond) project ERANETMED3-227 SMARTWATIR by the Conselleria de Educacion, Cultura y Deporte with the Subvenciones para la contratacion de personal investigador en fase postdoctoral, grant number APOSTD/2019/04, and through the "Ayudas para contratacion predoctoral de Formacion del Profesorado Universitario FPU (Convocatoria 2016)". Grant number FPU16/05540.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Dynamic beamforming for large area scan in array-based photoacoustic microscopy

  • Cebrecos, Alejandro|||0000-0001-8790-8668
  • García-Garrigos, Juan José
  • Jimenez, Noe|||0000-0002-6539-670X
  • Benlloch Baviera, Jose María|||0000-0001-6073-1436
  • Camarena Femenia, Francisco|||0000-0002-6713-1414
  • Descals, Andreu
[EN] We explore the use of a beamforming method intended for large-area scanning in optical-resolution photoacoustic microscopy. It has been evaluated in a experimental setup that comprises a low-cost laser diode and a phase array with a 128-elements linear probe. Three different beamforming strategies are discussed: no-beamforming, static beamforming and dynamic beamforming. The method has been tested in gelatine-based phantoms as well as ex-vivo organs. Results show that, compared with the other two, dynamic beamforming increases up to 15dB and homogenizes signal-to-noise ratio (SNR) along images of roughly 1 cm2. The method and system presented here could be the baseline for more advanced array-based systems that leverage the low-cost laser sources for clinical applications., This research has been supported by the Spanish Ministry of Science, Innovation and Universities through grant Juan de la Cierva - Incorporacion (IJC2018-037897-I), and program Proyectos I+D+i 2019 (PID2019-111436RB-C22). Action co-financed by the European Union through the Programa Operativo del Fondo Europeo de Desarrollo Regional (FEDER) of the Comunitat Valenciana 2014-2020 (IDIFEDER/2018/022). A.C. received financial support from Generalitat Valenciana and Universitat Politecnica de Val ` encia through the grants APOSTD/2018/229 and program PAID-10-19, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Quantifying the Production of Fruit-Bearing Trees Using Image Processing Techniques

  • García, Laura
  • Parra-Boronat, Lorena
  • Basterrechea-Chertudi, Daniel Andoni
  • Parra-Boronat, Mar
  • García-Navas, José Luis
  • Lorenz, Pascal
  • Abouaissa, Abdelhafid
  • Jimenez, Jose M.|||0000-0002-3688-7235
  • Rocher, Javier|||0000-0003-0182-1671
  • Sendra, Sandra|||0000-0001-9556-9088
  • Lloret, Jaime|||0000-0002-0862-0533
  • Tomás Gironés, Jesús|||0000-0002-0358-0325
  • Rodilla, M|||0000-0001-6767-5676
  • Falco, S.|||0000-0002-8679-9153
  • Sebastiá-Frasquet, M.-T.|||0000-0002-8042-5628
  • Mengual Cuquerella, Jesús|||0000-0002-8507-509X
  • González Romero, Juan Andrés|||0000-0001-9986-9854
  • Roig-Merino, Bernat|||0000-0002-1437-7752
[EN] In recent years, the growth rate of world agricultural production and crop yields have decreased. Crop irrigation becomes essential in very dry areas and where rainfall is scarce, as in Egypt. Persimmon needs low humidity to obtain an optimal crop. This article proposes the monitoring of its performance, in order to regulate the amount of water needed for each tree at any time. In our work we present a technique that consists of obtaining images of some of the trees with fruit, which are subsequently treated, to obtain reliable harvest data. This technique allows us to have control and predictions of the harvest. Also, we present the results obtained in a first trial, through which we demonstrate the feasibility of using the system to meet the objectives set. We use 5 different trees in our experiment. Their fruit production is different (between 20 and 47kg of fruit). The correlation coefficient of the obtained regression model is 0.97., This work has been partially supported by European Union through the ERANETMED (Euromediterranean Cooperation through ERANET joint activities and beyond) project ERANETMED3-227 SMARTWATIR by the Conselleria de Educación, Cultura y Deporte with the Subvenciones para la contratación de personal investigador en fase postdoctoral, grant number APOSTD/2019/04, and by the Cooperativa Agrícola Sant Bernat Coop.V.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Beyond the limits of digital interaction: should animals play with interactive environments?

  • Pons Tomás, Patricia
  • Catalá Bolós, Alejandro
  • Jaén Martínez, Francisco Javier|||0000-0002-8815-9643
Our digital world evolves towards ubiquitous and intuitive scenarios, filled with interconnected and transparent computing devices which ease our daily activities. We have approached this evolution of technology in a strictly human-centric manner. There are, however, plenty of species, among them our pets, which could also profit from these technological advances. A new field in Computer Science, called Animal-Computer Interaction (ACI), aims at filling this technological gap by developing systems and interfaces specifically designed for animals. This paper envisions how ACI could be extended to enhance the most natural animal behavior: play. This work explains how interactive environments could become playful scenarios where animals enjoy, learn and interact with technology, improving their wellbeing, This work is partially funded by the Spanish Ministry of Science and Innovation under the National R&D&I Program within the project CreateWorlds (TIN2010-20488). The work of Patricia Pons is supported by an FPU fellowship from the Spanish Ministry of Education, Culture and Sports (FPU13/03831). It also received support from a postdoctoral fellowship within the VALi+d Program of the Conselleria d’Educació, Cultura I Esport (Generalitat Valenciana) awarded to Alejandro Catalá (APOSTD/2013/013). We also thank the Valencian Society for the Protection of Animals and Plants (SVPAP) for their cooperation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Testing Existing Prototypes of Conductivity Sensors for Monitoring the Concentration of Organic Fertilizers in Fertigation Systems

  • Basterrechea-Chertudi, Daniel Andoni
  • Parra-Boronat, Lorena
  • Rocher, Javier|||0000-0003-0182-1671
  • Lloret, Jaime|||0000-0002-0862-0533
[EN] Agricultural production has grown in recent years, increasing the use of Organic Fertilizers (OF). For that reason, the use of these compounds must be controlled in fertigation water. In this paper, we test three prototypes, using different combinations of coils, to determine the amount of OF in the water. A coil is powered by a sine wave of 3.3 peak-to-peak Volts for inducing another coil. The objective of this system is to detect different kinds of problems that can cause incorrect fertilization, which affects the sustainability of agriculture. We present the tests to verify the proper functioning of the prototypes. We test our prototypes by means of different dilutions of OF. The used concentrations of OF are between 0 and 20 g/l. We measure the conductivity for each concentration and the output voltage of our prototypes. The results show that prototype 3 is the one that has the best performance, obtaining 1.47 V of difference between the maximum and minimum output voltage and a good correlation coefficient. Finally, a verification test is carried out; the average error in the different samples tested is 0.2212%., This work has been partially supported by the European Union through the ERANETMED (Euromediterranean Cooperation through ERANET joint activities and beyond) project ERANETMED3-227 SMARTWATIR, by ¿Ministerio de Educación, Cultura y Deporte¿, through the ¿Ayudas para contratacion pre-doctoral de Formación del Profesorado Universitario FPU (Convocatoria 2016)¿. Grant number FPU16/05540, and by Conselleria de Educación, Cultura y Deporte with the Subvenciones para la contratación de personal investigador en fase postdoctoral, grant number APOSTD/2019/04.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Improving Pre-Kindergarten Touch Performance

  • Nácher Soler, Vicente Ernesto
  • Catalá Bolós, Alejandro
  • Navarro, Elena
  • González, Pascual
  • Jaén Martínez, Francisco Javier|||0000-0002-8815-9643
Multi-touch technology provides users with a more intuitive way of interaction. However, pre-kindergarten children, a growing group of potential users, have problems with some basic gestures according to previous studies. This is particularly the case of the double tap and long pressed gestures, which have some issues related to spurious entry events and time-constrained interactions, respectively. In this paper, we empirically test specific strategies to deal with these issues by evaluating off-the-shelf implementations of these gestures against alternative implementations that follow these guidelines. The study shows that the implementation of these design guidelines has a positive effect on success rates of these two gestures, being feasible their inclusion in future multi-touch applications targeted at pre-kindergarten children., This work received financial support from the Spanish Ministry of Education under the National Strategic Program of Research and Projects TIN2010-20488 (CREATEWORLD) and TIN2012-34003 (insPIre). This work is also supported by a postdoctoral fellowship within the VALi+d program from Conselleria d’Educació, Cultura i Esport (Generalitat Valenciana) to A. Catalá (APOSTD/2013/013).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

From On-Campus to Online Instruction in Postgraduate Built Heritage Management Studies

  • Gilabert Sansalvador, Laura|||0000-0001-7890-5334
  • Viñals, Mª José|||0000-0002-7589-7815
  • Casar Furió, María Emilia|||0000-0001-5910-8815
  • Herrero-García, Luis-Fco
  • Capilla Tamborero, Esther
[EN] Fieldwork (or field-based learning), design by research, and in situ data collection are essential in researching and working with built heritage. They are a fundamental part of the academic program of the Preservation of Architectural Heritage postgraduate studies at the Universitat Politècnica de València (UPV). Due to the health emergency caused by the coronavirus Covid-19 in March 2020, on-campus teaching-learning had to switch to online mode urgently and unexpectedly. This entailed particular challenges for the Heritage Management Studio course because its practical performance is based on visiting locations and heritage assets that in themselves are objects of study. The use of the UPV teaching-learning institutional platform (PoliformaT) combined with the Microsoft Teams video conferencing application proved to be effective to address the online regular theoretical lessons; however, hands-on practical experiences were more difficult to organize. Thus, it was necessary to adapt the learning method to the context, design new alternative tasks and identify available virtual tools and means in order to organize the practical teaching and, at the same time, fit in with the quality requirements of the Master¿s program. Live streaming activities such as collaborative international engaging webinars, invited lectures and online interviews with heritage managers were conducted as a part of the instructional offer. Videos, documentaries, and virtual tours were also used as extra resources to get to know the analysed heritage sites. In addition, the teaching staff adopted several measures to alleviate the effects caused by the social distancing, by encouraging collaboration and relationships among the students through the development of teamwork, and by ensuring social virtual interaction between teachers and students to assist students in their commitments and to provide them with emotional and motivational support. This paper describes how the course was adapted and analyses the challenges and opportunities that online teaching-learning presents for the future in the specific field of Built Heritage Management. It highlights the existing shortcomings in the availability of digitized information on this topic, which made it difficult for students to conduct their research and management projects. It also discusses the opportunity provided by the situation to address new issues in Heritage Management, such as visitor safety and health in cultural tours, virtual access to heritage or strategies to reconnect heritage with the public, from which very innovative student projects emerged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Monitorización de las condiciones medioambientales durante la restauración de la Iglesia de San Nicolás

  • Vivó Soria, Enrique
  • Bosch-Roig, Pilar|||0000-0003-2019-399X
  • Marcenac, Valeria|||0000-0002-5591-1464
  • Montes-Estellés, Rosa M|||0000-0002-4599-6644
  • Roig Picazo, M. Pilar
[ES] En el marco de la restauración de las pinturas murales y revestimiento ornamental de la nave central de la Iglesia Parroquial de San Nicolás Obispo y San Pedro Mártir de Valencia, se propone una metodología de intervención que contempla tanto la estricta intervención restaurativa como los pertinentes trabajos de apoyo, control y definición de pautas de conservación del conjunto intervenido. El presente artículo expone la metodología empleada y los primeros resultados de la monitorización de las condiciones medioambientales, que comprende la toma de datos termo-higrométricos, partículas en suspensión y del nivel de microorganismos presentes en el aire. Para ello se dispone de un sistema de control centralizado con sensores combinados de temperatura y humedad relativa ambiental y de temperatura superficial, situados a lo largo de la nave principal y en el exterior. Con este sistema se pretende la observación en un período anual de las variaciones de la temperatura y humedad relativa en los diferentes espacios que componen el edificio, así como sobre las superficies pictóricas. El sistema permite la obtención y transmisión de datos en tiempo real. Paralelamente se realiza muestreo trimestral (para determinar las variaciones estacionales) de los contaminantes atmosféricos, para el control de la evolución de las partículas en suspensión y microorganismos presentes en el aire, en el ambiente interior de la iglesia. Esta investigación microclimática pretende caracterizar la evolución y tendencias de parámetros psicrométricos en el ambiente objeto de estudio, y poner en relación estos datos con la evolución de las partículas en suspensión y actividad microbiológica en el aire. Este conjunto de sistemas de control permiten por un lado la monitorización de la restauración, y por otro lado la realización de una estrategia de conservación preventiva que permitirá prolongar en el tiempo los resultados de la presente restauración., La Doctora Pilar Bosch ha participado en esta investigación gracias a la beca Post-doctoral VALi + d APOSTD/2013/024 financiada por la Generalitat Valenciana, España
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

From onsite to remote practical learning in Fundamentals of Biotechnology Processes Engineering I course

  • Castelló Gómez, María Luisa|||0000-0002-4889-1792
  • Heredia Gutiérrez, Ana Belén|||0000-0001-6629-9779
  • Fito, Pedro J.|||0000-0001-9666-276X
  • Calvo-Lerma, Joaquim
  • Asensio-Grau, Andrea
[EN] The COVID-19 pandemic has brought many changes in learning methodologies at all educational levels, including higher education. Under these circumstances, one of the most difficult challenges to face is to approach practical and laboratory learning at the university when students¿ attendance to the physical laboratory space is restricted. In the particular case of Bachelor¿s Degree in Biotechnology, future graduates are appealed to master many instrumental techniques related to this field. Therefore, the lack of onsite laboratory sessions where students observe, practice and experiment with materials and equipment to understand phenomena, either individually or in groups, might imply a detriment of the acquisition of the associated specific and soft skills. In order to minimize this negative impact in learning on COVID-19 pandemic, several initiatives have been carried out in order to adapt learning-teaching methodology from onsite to virtual-laboratory sessions. The aim of this contribution is to share, with other colleagues, the result of this experience in the context of the Fundamentals of Biotechnology Engineering I course at the Universitat Politècncia de València. For that, the preparation of several supporting tools and resources were addressed. First, lecturers in the lab carried out all the steps of the experiments and recorded them for all the practical tasks in order to prepare short videos (5-6 min screencasts) in which experiments were entirely shown. To these videos, the pertinent related explanations to aims, materials and methods necessary to carry out experiments were incorporated where suitable, so that students had a guidance on how to proceed to get the experimental data of the practical task. Besides, pedagogical articles were prepared including the founding of the methodology and the explanation of the related theoretical concepts, along with the detailed description of the mathematical models and calculations required to achieve the desirable outcomes. Both, screencasts and articles, known in UPV as learning objects, take part of the UPV Online Teaching Plan. In order to assess students¿ achievements, they were asked to answer multiple choice/filling the gap questions tests delivered by UPV teaching platform PoliformaT. For that, they had two attempts and then they received feedback to contribute to their learning process. All this information was framed in the ¿Lessons¿ section of PoliformaT website of the subject to ease the course-monitoring. Furthermore, during the implementation of each practical task, lecturers and students were synchronically connected by means of Teams platform in the established timetable for each group. Thus, when attending to the lab was possible, lecturers showed in real time the procedure carried out in the lab by the students who physically attended the lab, and therefore, explanation was done in a more detailed way and students were able to ask their doubts directly to the lectures. If there was no possibility to attend the lab due to confinement, the practical tasks were also explained by Teams. In both cases, these meetings in teams were recorded to give the students the chance to visualize them as many times as they needed to understand all the procedure and calculus. Finally, students¿ perceptions about this experience was collected by means of a short questionnaire prepared using the Google forms tool., We acknowledge the Generalitat Valenciana nad also the European Union for the PhD scholarship given to Andrea Asenssio Grau (ACIF/2017/008) and the post-doctoral grant awarded to Joaquim Calvo-Lerma (APOSTD 2019-102).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

The use of podcasting for a hybrid flipped classroom

  • Marco-Detchart, Cédric
  • Taverner-Aparicio, Joaquín José|||0000-0002-5163-5335
  • Jordán, Jaume|||0000-0003-0400-9136
[EN] We are currently assisting a social paradigm change motivated by the incorporation, more and more accelerated, of new information technologies (e.g., social networks or content platforms) in our day-today life. The increased availability of online resources in a universal, diverse, and permanent way is modifying how we consume online information and content. This is especially true when it comes to children and teenagers. New generations are increasingly adapting to immediacy and communication through information technologies. Therefore, it is necessary to evolve the educational paradigm to adapt it to this new social reality. Future learning strategies should consider the latest models of social communication, adapting them to achieve learning objectives from the perspective of constructive alignment and the acquisition or improvement of transversal competencies. In this sense, there are currently several technologies that can be incorporated into the classroom. One of the emerging technologies is the podcast. Usually used for entertainment (e.g., stories, books, or radio talks), the podcast is becoming a tool for massive online content distribution. There exist many advantages to using podcasting for an educative purpose, as the production cost (in terms of time) is lower than recording a video. From a content consumer perspective, the main advantage is that an audio-only approach can be used/consumed everywhere and more easily than video media. Some educational podcasts are available online but generally tend to focus on learning languages or history. Outside these specific topics, their use in technology subjects is still residual and mainly focuses on interviews or long expositions. Moreover, in current proposals, the teacher is the one who produces the podcast, and therefore it is a one-way communication model (from the teacher to the students). On the other hand, one of the teaching innovation models that is being increasingly used is the flipped classroom. In the flipped classroom, students are the main protagonists in their learning. They must prepare the theoretical parts on their own, and the teacher serves as a guide during this learning process. In this paper, we propose using the podcast in the flipped classroom model, turning the podcast into a bidirectional tool in which students are both producers and receivers of learning. The proposal consists of dividing the class into small groups of students (2-4). Each group will record a podcast episode on a different conceptual part of the lesson. Group members will have to coordinate and share the activities of recording and searching for content for the podcast. This will encourage transversal skills related to communication and social skills. These podcasts will then be shared with the rest of the groups so that everyone can have direct and permanent access to the different sections of the lesson. Creativity will also be encouraged, allowing students to add the music or sound effects they consider necessary to enhance the explanation., The authors gratefully acknowledge the financial support of Consellería d'Innovació, Universitats, Ciencia i Societat Digital from Comunitat Valenciana and the European Social Fund (Investing In Your Future) (APOSTD/2021/227 and CIPROM/2021/077), the Spanish Ministry of Science (project PID2021-123673OB-C31) and the Research Services of Universitat Politècnica de València. Jaume Jordán is supported by grant IJC2020-045683-I funded by MCIN/AEI/10.13039/501100011033 and by "European Union NextGenerationEU/PRTR".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Low-cost Soil Moisture Sensors Based on Inductive Coils Tested on Different Sorts of Soils

  • Parra-Boronat, Mar
  • Parra-Boronat, Lorena
  • Mauri, Pedro V.
  • Lloret, Jaime|||0000-0002-0862-0533
  • Llinares Palacios, Josep Vicent|||0000-0002-9740-3281
[EN] The use of precision agriculture and the Internet of Things has improved the efficiency of many cultures. Nevertheless, there are a few low-cost options to monitor soil moisture. Moreover, those options depend on the specific characteristics of the soil. In this paper, we attempt to find a sensor, based on mutual inductance, that could be used for more than one sort of soil. We study three prototypes, one of them with casing. The sensors are powered with a voltage of 10 peak to peak volts. One of the soils has a high content of organic matter and sand while the other is rich in sand and silt. The best prototype for the soil with high levels of organic matter has 10 turns on the powered coil and 5 on the induced coil. The best frequency for this sensor is 1340 kHz. For the soil with a significant quantity of silt, the best prototype has 80 turns on the powered coil and 40 on the induced coil. The frequency at which this sensor works best is 229 kHz, which happens to be its peak frequency. With those characteristics regressions lines with R2 values higher than 0.75 can be modeled, This work is partially found by the Conselleria de Educación, Cultura y Deporte with the Subvenciones para la contratación de personal investigador en fase postdoctoral, grant number APOSTD/2019/04, by European Union through the ERANETMED (Euromediterranean Cooperation through ERANET joint activities and beyond) project ERANETMED3-227 SMARTWATIR, and by the European Union with the Fondo Europeo Agrícola de Desarrollo Rural (FEADER) Europa invierte en zonas rurales, the MAPAMA, and Comunidad de Madrid with the IMIDRA, under the mark of the PDR-CM 2014-2020 project number PDR18-XEROCESPED.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Animal Ludens: Building Intelligent Playful Environments for Animals

  • Pons Tomás, Patricia
  • Catalá Bolós, Alejandro
  • Jaén Martínez, Francisco Javier|||0000-0002-8815-9643
Looking for effective ways to understand how animals interact with computer-mediated systems, Animal-Computer Interaction (ACI) research should rely on the most natural and intrinsic behavior among the majority of living species: play. Animals are naturally motivated towards playing. Playful environments are, therefore, a promising scenario in which to start developing animal-centered ecosystems, and there are plenty of circumstances where playful environments could help to improve animals well-being. However, developing a custom system for each possible context remains unfeasible, and more appealing solutions are required. If playful environments were equipped with intelligent capabilities, they could learn from the animals behavior and automatically adapt themselves to the animals needs and preferences by creating engaging playful activities for different purposes. Hence, this work will define intelligent playful environments for animals and explain how Ambient Intelligence (AmI) can contribute to create adaptable playful experiences for animals in order to improve their quality of life., This work was partially funded by the Spanish Ministry of Science and Innovation under the National R&D&I Program within the project CreateWorlds (TIN2010-20488). It also received support from a postdoctoral fellowship within the VALi+d Program of the Conselleria d'Educació, Cultura i Esport (Generalitat Valenciana) awarded to Alejandro Catalá (APOSTD/2013/013). The work of Patricia Pons has been supported by the Universitat Politecnica de Valencia under the 'Beca de Excelencia" program, and currently by an FPU fellowship from the Spanish Ministry of Education, Culture and Sports (FPU13/03831).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Effects of Geometry in Atrial Fibrillation Markers Obtained With Electrocardiographic Imaging

  • Molero-Alabau, Rubén
  • Hernández-Romero, Ismael
  • Liberos, Alejandro
  • Fernández-Avilés, Francisco
  • Atienza, Felipe
  • Rodrigo, Miguel
  • Andreu M. Climent|||0000-0002-7260-8811
  • Guillem Sánchez, María Salud|||0000-0001-5660-3693
[EN] Electrocardiographic imaging (ECGI) can characterise cardiac pathologies such as atrial fibrillation (AF) through specific markers based on frequency or phase analysis. In this study, the effect of the geometry of patients torso and atria in the ECGI resolution is studied. A realistic 3D atrial geometry was located on 30 patient torsos and ECGI signals were calculated for 30 different AF simulations in each torso. Dominant frequency (DF) and reentrant activity analysis were calculated for each scenario. Anatomical and geometrical measurements of each torso (30-80% of variability between patients) and atria were calculated and compared with the errors in the ECGI estimation versus the departing EGM maps. Results show evidences that big chest dimensions worsen the non-invasive calculation of AF markers (p<0.05). Also, higher number of visible electrodes from each atrial region improves ECGI characterization measured as lower DF deviations (0.64±0.26 Hz vs 0.72±0.27 Hz, p<0.05) and higher reentrant activity coincidence (10.1±12.2% vs 3.4±3.4%, p<0.05). Torso and atrial geometry affect the quality of the non-invasive reconstruction of AF markers such as DF or reentrant activity. Knowing the geometrical parameters that worsen non-invasive AF maps may help to measure each detected AF driver reliability., Supported in part by: Instituto de Salud Carlos III FEDER (Fondo Europeo de Desarrollo Regional; IJCI2014-22178, DTS16/00160; PI14/00857, PI16/01123; PI17/01059; PI17/01106), Generalitat Valenciana Grants (APOSTD/2017 and APOSTD/2018) and projects (GVA/2018/103) and EIT-Health 19600 AFFINE.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Evaluating the use of self-video teaching in a flipped classroom

  • Taverner-Aparicio, Joaquín José|||0000-0002-5163-5335
  • Jordán, Jaume|||0000-0003-0400-9136
  • Vos, Tanja Ernestina|||0000-0002-6003-9113
  • Marco-Detchart, Cédric
[EN] New generations are increasingly becoming more familiar with consuming audio-visual material through online platforms. Consequently, learning through IT-based tools is becoming more and more common. Nowadays, learning platforms (e.g., edX or W3Schools) or content platforms (e.g., YouTube) containing vast amounts of courses and video tutorials are becoming increasingly popular among students. The main advantage of online learning is that students can access the content from anywhere and whenever they want, being able to revisit the content to review concepts and improve their level of knowledge. In this way, learning based on a deep approach and self-learning is promoted since students are the ones who regulate their learning process by deciding how much time to dedicate and when to do it. Appropriately using this type of resource can become a very effective tool applied to a flipped classroom model. In the flipped classroom model, students are active learners since they are in charge of developing the lesson material both in class and at home. In this type of learning, the teacher assumes the role of guide assisting during the learning process. A standard methodology in this flipped classroom model consists of students preparing different parts of the course content and then explaining those parts to their classmates. In this way, students develop a sense of responsibility toward the rest of their classmates, creating an environment where they can recognise their shortcomings and take control of their learning to teach others. In addition, the acquisition of transversal communication skills is encouraged. With all this in mind, in this article, we describe a case study we are currently carrying out with students enrolled in the programming course at the Universitat Politècnica de València. Our proposal combines the flipped classroom model with access to online resources. In this first approach, we have proposed that the students record a video explaining a part of the lesson or how to solve at least two exercises step by step. The explanation must be done as if they were content creators, and their audience were beginner programmers. The students will upload the videos to a private YouTube channel that will only be accessible to their classmates. In the classroom, the teacher will encourage students to share their stories and experiences while learning, editing, and recording the videos. This proposal's main objective is to promote students' engagement in the learning process and offer them learning alternatives through online content with a closer language that they can access whenever they need it. To motivate participation, students and teachers will choose the three best videos from all the videos. The three winners will receive extra points in the evaluation of the course., The authors gratefully acknowledge the financial support of Consellería d'Innovació, Universitats, Ciencia i Societat Digital from Comunitat Valenciana and the European Social Fund (Investing In Your Future) (APOSTD/2021/227 and CIPROM/2021/077), the Spanish Ministry of Science (project PID2021-123673OB-C31) and the Research Services of Universitat Politècnica de València. Jaume Jordán is supported by grant IJC2020-045683-I funded by MCIN/AEI/10.13039/501100011033 and by "European Union NextGenerationEU/PRTR".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Analysis of finite dimensional linear control systems subject to uncertainties via probabilistic densities

  • Cortés, J.-C.|||0000-0002-6528-2155
  • Romero, José-Vicente|||0000-0003-3366-6557
  • Roselló, María-Dolores|||0000-0002-5724-7683
  • Navarro-Quiles, A.
This work has been partially supported by the Ministerio de Economia y Competitividad grant MTM2017-89664-P. Ana Navarro Quiles acknowledges the funding received from Generalitat Valenciana through a postdoctoral contract (APOSTD/2019/128).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Magnetic force induced vibration on a ferromagnetic sphere for viscoelastic media characterization

  • Cebrecos, Alejandro|||0000-0001-8790-8668
  • Jimenez, Noe|||0000-0002-6539-670X
  • Benlloch Baviera, Jose María|||0000-0001-6073-1436
  • Camarena Femenia, Francisco|||0000-0002-6713-1414
  • Company, Miguel
[EN] A new method that combines transient magnetic forces with ultrasonic imaging and allows the local experimental characterization of the complex shear modulus of a viscoelastic medium is presented. By measuring the dynamics of a ferromagnetic inclusion under the application of a magnetic force, the viscoelastic properties of the medium are extracted. The system is composed of a coil, which creates a magnetic field that induces displacement on a ferromagnetic particle located inside a test phantom, and an ultrasound transducer operating in pulsed-echo mode, utilized to track the displacement of the particle with spatial resolution of several um. Experiments were conducted embedding a ferromagnetic sphere on test phantoms with different compositions and at different temperatures. The obtained results are in good agreement with the theoretical estimation of the dynamical response of a sphere and show robustness on the estimation of the viscoelastic parameters. Moreover, temperature dependent results show asymptotic elasticity values which are physically consistent for soft-solid media., This work is funded by the Spanish Ministerio de Economía e lnnovación (MlNECO) Generalitat Valenciana (GVA) through the projects TEC2016-80976-R and AlCO2016-108. N.J. and A. C acknowledge the support of GVA through the contracts APOSTD/2017/042 and APOSTD/2018/A/229.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

An Optimizing Protocol Transformation for Constructor Finite Variant Theories in Maude-NPA

  • Aparicio-Sánchez, Damián
  • Escobar Román, Santiago|||0000-0002-3550-4781
  • Gutiérrez Gil, Raúl|||0000-0002-3984-2868
  • Sapiña-Sanchis, Julia|||0000-0003-2994-6986
[EN] Maude-NPA is an analysis tool for cryptographic security protocols that takes into account the algebraic properties of the cryptosystem. Maude-NPA can reason about a wide range of cryptographic properties. However, some algebraic properties, and protocols using them, have been beyond Maude-NPA capabilities, either because the cryptographic properties cannot be expressed using its equational unification features or because the state space is unmanageable. In this paper, we provide a protocol transformation that can safely get rid of cryptographic properties under some conditions. The time and space difference between verifying the protocol with all the crypto properties and verifying the protocol with a minimal set of the crypto properties is remarkable. We also provide, for the first time, an encoding of the theory of bilinear pairing into Maude-NPA that goes beyond the encoding of bilinear pairing available in the Tamarin tool, Partially supported by the EU (FEDER) and the Spanish MCIU under grant RTI2018-094403-B-C32, by the Spanish Generalitat Valenciana under grant PROMETEO/2019/098, and by the US Air Force Office of Scientific Research under award number FA9550-17-1-0286. Julia Sapiña has been supported by the Generalitat Valenciana APOSTD/2019/127 grant
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Robustez de estructuras prefabricadas de hormigón: simulación computacional mediante applied element method

  • Buitrago, Manuel|||0000-0002-5561-5104
  • Makoond, Nirvan Chandra|||0000-0002-5203-6318
  • Adam, Jose M|||0000-0002-9205-8458
  • Mezquida-Alcaraz, Eduardo J.
[ES] El colapso progresivo puede definirse como el proceso por el cual un daño local inicial pone en marcha una cadena de fallos, que a veces puede conducir a un colapso desproporcionado o total. Se trata de un fenómeno que a menudo puede ser desencadenado por cargas anormales causadas por eventos extremos, a los que pueden estar expuestos todo tipo de edificios. A pesar de que las estructuras prefabricadas de hormigón, cada vez más utilizadas, pueden ser especialmente vulnerables al colapso progresivo, se han realizado relativamente pocos estudios sobre la robustez de esta tipología estructural en comparación con las estructuras hormigonadas in situ. Los modelos computacionales validados a partir de resultados experimentales son una de las herramientas más prometedoras para comprender mejor la respuesta de las estructuras prefabricadas de hormigón frente a acciones accidentales. Este trabajo presenta el empleo de una nueva estrategia de modelización, el Applied Element Method, que se ha empleado para predecir el comportamiento de un edificio-probeta de hormigón prefabricado bajo diferentes escenarios de retirada de columnas. Estos resultados se han utilizado para planificar la estrategia de monitorización y el esquema de carga para las pruebas experimentales en una estructura real de dos plantas de 15 m x 12 m que se construirá y monitorizará durante la retirada repentina de tres columnas diferentes., El trabajo presentado en este artículo no habría sido posible sin la financiación recibida del Ministerio de Ciencia e Innovación para el proyecto PREBUST (BIA2017-88322-R-AR) y para la ayuda Juan de la Cierva-Incorporación (IJC2020-042642-I). Los autores desean agradecer a Pedro A. Calderón y Juan J. Moragues su inestimable ayuda y apoyo. También se agradece a Ayman El-Fouly, de Applied Science International, su inestimable colaboración.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Introduction of a practical lesson for the evaluation of carotenoids in fruits and vegetables for Master students

  • Guijarro-Real, Carla
  • Plazas Ávila, María de la O|||0000-0001-8090-7312
  • Rodríguez Burruezo, Adrián|||0000-0002-4530-8071
  • Prohens Tomás, Jaime|||0000-0003-1181-9065
  • Fita, Ana|||0000-0002-8637-5852
[EN] Master studies provide post-graduate students with an advanced training for a career specialization. In Plant Science studies, practical lessons can become essential during the learning process. In fact, these lessons can be used as a tool for consolidating the knowledge acquired with the theoretical lessons. Moreover, during the practical lessons, students have the opportunity to apply this knowledge to real situations, and to identify and deal with real problems that can appear. Our Institute offers a Master in Plant Breeding in which the learning process through practical lessons is conceived as an essential complement for theoretical knowledge. The Master provides students with the competence of designing and performing breeding programs addressed to improve adaptation of plants to biotic and abiotic stresses, as well as to improve the nutritional and sensorial quality of crops. In plants, there are different families of molecules related to defense, adaptation and/or quality, thus the study of them is of great importance in many breeding programs. An example of compounds with high interest is the family of carotenoids. Carotenoids include a group of compounds with several functions in plants. Some carotenoids are accessory pigments for photosynthesis or precursors of the abscisic acid, offer protection against photooxidative damage, or confer color to flowers, fruits and coloured roots, among other functions. They are also bioactive compounds related to the preservation of human health. According to this combined interest of carotenoids for 1) improving health status and 2) improving tolerance of crops, we consider that future professionals in Plant Breeding would improve their skills by performing an appropriate analysis of these compounds. Thus, we propose the introduction of a new practical lesson in the mandatory subject "Instrumental Techniques" addressed to the evaluation of individual carotenoids by high performance liquid cromatography (HPLC). During the lesson, which will be completed in three sessions, students will perform all the steps for the analysis of carotenoids from different plant material: extraction, preparation of sample for the HPLC analysis, preparation of standards, and analysis of results. At the end of the lesson, students should be able to perform autonomous analyses of carotenoids, and to deal with real problems that can occur during the protocol. In summary, this practical lesson complements the advanced learning process of students and provides them with a specific competence for their future careers. Moreover, guidance during the use of the HPLC should provide students with a secondary specific competence that is the knowledge and application of this technique, which can be transferred to other molecules. Finally, the lesson can be adapted to other Plant related and Food Technology studies., Carla Guijarro-Real is grateful to the Ministerio de Educación, Cultura y Deporte of Spain for financial support by means of a predoctoral FPU grant (FPU14-06798). Mariola Plazas is grateful to Generalitat Valenciana and Fondo Social Europeo for financial support by means of a post-doctoral grant (APOSTD/2018/014).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Colapso progresivo y robustez de edificios y puentes, Progressive collapse and robustness of buildings and bridges

  • Adam, Jose M|||0000-0002-9205-8458
  • Buitrago, Manuel|||0000-0002-5561-5104
  • Makoond, Nirvan Chandra|||0000-0002-5203-6318
[ES] Los últimos años han estado marcados por un número cada vez más elevado de estudios sobre el colapso progresivo y la robustez estructural como consecuencia de la persistente aparición y aparentemente creciente frecuencia de fallos estructurales catastróficos. En la actualidad, la gran mayoría de estos estudios se centran en simulaciones computacionales y en pruebas de laboratorio de subestructuras a escala reducida. Aunque esta filosofía de estudio ha permitido avanzar sustancialmente en la materia, estas estrategias se caracterizan por sus importantes limitaciones, que sólo pueden superarse mediante ensayos a escala real de las estructuras. Este artículo presenta algunos de los principales trabajos de investigación realizados en este sentido por el grupo de investigación Building Resilient del instituto ICITECH de la Universitat Politècnica de València. Se presentan los trabajos más importantes relacionados con el cimbrado de edificios, las estructuras de edificios de hormigón armado ejecutadas in situ y prefabricadas, los puentes metálicos en celosía y los edificios segmentados por fusibles, junto con los resultados más significativos obtenidos hasta el momento., Estos trabajos no hubieran dado sus frutos sin la financiación y ayuda recibidas por: FGV (Ferrocarrils de la Generalitat Valenciana), Calsens, Ministerio de Ciencia e Innovación, Generalitat Valenciana, Ministerio de Educación y Formación Profesional, Fundación BBVA, European Research Council, LIC Levantina, Ingeniería y Construcción, y Encofrados Alsina.