Pasar al contenido principal

IDENTIFICACION DE BARRERAS Y OPORTUNIDADES SOSTENIBLES EN LOS MATERIALES Y APLICACIONES DEL ALMACENAMIENTO DE ENERGIA TERMICA

ENE2015-64117-C5-1-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2015
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Dirección General de Investigación Científica y Técnica
Centro beneficiario UNIVERSIDAD DE LLEIDA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 21
Encontrada(s) 1 página(s)

Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Phase change material selection for two innovative compact energy storage systems in residential buildings

  • Zsembinszki, Gabriel
  • Gasia, Jaume
  • Oró Prim, Eduard
  • Cabeza, Luisa F.
Within the framework of HYBUILD, an EU Horizon 2020-funded project, two innovative compact hybrid electrical/thermal storage systems for stand-alone and district connected residential buildings will be developed and tested in three demos located in Spain, France, and Cyprus. One of the innovative systems is aimed to be placed in buildings located in Mediterranean climate regions, where cooling loads are dominant, while the other system is intended for Continental climate regions, where the heating demand is dominant. Each system will include, among others components such as a sorption storage system and domestic hot water tanks, a latent thermal energy storage (LTES) system that will be connected to a heat pump through an innovative heat exchanger made of aluminium and filled with phase change material (PCM). In both cases, the heat pump works with electricity provided by a photovoltaic system that is, at the same time, connected to an electrical storage battery. The aim of using the LTES system is to enhance the use of solar energy, which will be translated into a reduction of the building energy consumption and related costs. This study focuses on the selection of the most suitable PCM to be used in each system. On the one hand, the LTES system of the Mediterranean system will be used to store cold to reduce the cooling demand. Taking into account that, according to the design parameters, the heat pump will require a refrigerant evaporation temperature around 2 ºC, and the building cooling system will require water supply in the range from 7 ºC to 12 ºC, the PCM melting temperature range should be within 0 ºC and 7 ºC. On the other hand, the LTES system of the Continental system will be used to store heat to reduce the domestic hot water (DHW) demand. The LTES will be located at the compressor outlet and will be charged by the hot refrigerant that exits the compressor at temperatures as high as 120 ºC. During the discharge process, the heat stored in the LTES will be supplied to the DHW at a temperature in the range between 50 ºC to 55 ºC. As a consequence, the range for the PCM melting temperature investigated in this case should be between 62 ºC and 68 ºC. Besides the melting temperature, other selection criteria considered include the PCM melting enthalpy and melting range, maximum allowed working temperature, density, thermal conductivity, availability, cost, and compatibility with aluminium. To decide the ideal PCM candidate for each system, a decision matrix was defined and used, by applying a weighted score to the selection criteria items according to their importance. The preliminary results indicate that for the Mediterranean system the best candidate is the commercial savE OM3 PCM, while for the Continental system, another commercial product PureTemp 63 is the most adequate option., This work was partially funded by the Ministerio de Economía y Competitividad de España (ENE2015- 64117-C5-1-R (MINECO/FEDER)). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (GREiA 2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. Jaume Gasia would like to thank the Departament d'Universitats, Recerca i Societat de la Informació de la Generalitat de Catalunya for his research fellowship (2018 FI_B2 00100). This project has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No 768824 (HYBUILD)
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Example of an Innovative Initiative for Education in Thermal Energy Storage: INPATH-TES Project

  • Zsembinszki, Gabriel
  • Cabeza, Luisa F.
Following the EC SET-Plan Education and Training Roadmap, the goal of INPATH-TES is to create a network of academia, research institutes and small and medium-sized enterprises (SMEs) to implement a joint PhD programme on Thermal Energy Storage (TES) technologies. The project consortium consists of 22 partners from academia, industry and SMEs from 14 different countries. The final result of such a network is to educate professionals on these technologies for the European research and industry institutions. Some of the main challenges identified so far consist of the development of the programme, the implementation of the programme in each country/institution, and to ensure the continuity of the programme after EU funding ends., The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2014 SGR 123). GREA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. This study has received funding from European Union’s Horizon 2020 research and innovation programme under grant agreement Nº 657466 (INPATH-TES). The work is partially funded by the Spanish government ENE2015-64117-C5-1-R (MINECO/FEDER).
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Corrosion inhibitors for TES material at high temperature for CSP plants

  • Fernández, Ángel G.
  • Cabeza, Luisa F.
Molten salt technology using nitrate salts as thermal energy storage material is the current state-of-the-art of concentrated solar power technology and power tower central receivers are currently limited by the maximum operating temperature of their working fluid. The limit of solar salt (60wt.%NaNO3 + 40wt.%KNO3) thermal stability is around 565°C with ambient air as the cover gas. In order to obtain higher efficiency goals using molten salt technologies working at higher temperatures (e.g., 650°C to 750°C), a different salt chemistry is required for new generation of CSP plants and chlorides molten salts could be a feasible option. Corrosion mitigation could solve the current issues related with the use of chloride salt at high temperature. In this work, the proposal of different corrosion mitigation strategies has been evaluated, as well as the identification of the most corrosive impurities present in the ternary chloride salt composed by MgCl2/KCl/NaCl (60/20/20 mol%). For this purpose, electrochemical impedance spectroscopy tests were carried out at 700°C on austenitic stainless steel (AISI 304) and a Ni base alloy (Inconel 702) during 100 hours. In this case, MgOHCl was identified as the main important corrosive impurity, present in the chloride salt, to control in the storage system. Regarding the materials tested, Ni base alloy (Inconel 702) showed the most promising results for their use as container material., The research leading to these results has received funding from Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER)). The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREiA (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. Angel G. Fernández wants to acknowledge the financial support from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant No 712949 (TECNIOspring PLUS) and from the Agency for Business Competitiveness of the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Benchmarking of energy demand of domestic and small business buildings

  • Coma Arpón, Julià
  • Maldonado, José Miguel
  • Gracia Cuesta, Alvaro de
  • Gimbernat, Toni
  • Botargues, Teresa
  • Cabeza, Luisa F.
Rapid expansion of solar thermal energy for increasing energy efficiency of buildings has been adopted in short/medium and long-term energy strategies of EU countries. This enhancement of energy efficiency in buildings is in line with regional actions with the European climate energy objectives as defined in the European Union’s “20-20-20” targets and in the European Commission’s Energy Roadmap 2050. Within this context, the overall objective of this work is to develop an innovative high performance and cost effective hybrid solar heat and power system, which consist in a novel flat Fresnel mirror solar concentrating collector and micro organic Rankine cycle plant combined with advanced phase change materials as thermal storage, all system managed by smart control units. The initial application is to be implemented in individual dwellings and small business residential buildings for on-site electricity and heat generation using solar thermal energy. It is estimated that the proposed technology will deliver 60% of domestic energy requirements and provide 20% reduction in energy costs and greenhouse gas emissions compared to the best existing low carbon energy technologies. To reach the main objectives, the first step consist in providing information on features of architecture of domestic and small business residential buildings and their annual energy demands for different countries such as: Spain, France Germany, Italy, and United Kingdom. This will include detailed building information of envelopes (walls, roof, lofts, etc.), structure, fabric, and results of energy demands (domestic hot water, space heating and electricity) for the abovementioned countries. This information will be used as input data during the development of this technology as it will point out the potential benefits of the system in different countries, climates, and building typologies., This study has received funding from European Union’s Horizon 2020 research and innovation programme under grant agreement Nº723596 (Innova MicroSolar) and Nº 657466 (INPATH-TES), from the European Commission Seventh Framework Programme (FP/2007-2013) under grant agreement Nº PIRSES-GA-2013-610692 (INNOSTORAGE). The work is partially funded by the Spanish government ENE2015- 64117-C5-1-R (MINECO/FEDER), ENE2015-64117-C5-3-R (MINECO/FEDER) and (ULLE10-4E-1305). GREA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2014 SGR 123). Alvaro de Gracia would like to thank Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva, FJCI-2014-19940.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Comparative analysis of energy demand and CO2 emissions of residential buildings, Benchmarking of energy demand and CO2 emissions of domestic residential buildings

  • Coma Arpón, Julià
  • Maldonado, José Miguel
  • Gracia Cuesta, Alvaro de
  • Gimbernat, Toni
  • Botargues, Teresa
  • Cabeza, Luisa F.
Rapid expansion of solar thermal energy for increasing energy efficiency of buildings has been adopted in short/medium and long-term energy strategies of EU countries. Within this context, the overall objective of this work is to develop an innovative high performance and cost effective hybrid solar heat and power system. The initial application is to be implemented in individual dwellings and small business residential buildings for onsite electricity and heat generation using solar thermal energy. It is estimated that the proposed technology will deliver 60% of domestic energy requirements and provide 20% reduction in energy costs and greenhouse gas emissions compared to the best existing low carbon energy technologies. The aim of this study consists in performing a comparative analysis of the different building typologies, which can host this technology, and their energy demands for heating and domestic hot water, as well as their CO2 emissions., This study has received funding from Eurepean Union's Horizon 2020 research and innovation programme under grant agreement Nº 723596 (Innova MicroSolar) and Nº 657466 (INPATH-TES). The work is partially funded by the Sapnish government ENE2015-64117-C5-1-R (MINECO/FEDER) and ENE2015-64117-C5-3-R (MINECO/FEDER). GREA is certified agent TECNIO in the cathegory of technology developers from the Government of Catalonia. The authors would like to thanks the Calatan Governmnet for the quality accreditation given to their research group (2014 SGR 123). Alvaro de Gracia would like to thanks Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva, FJCI-2014-19940.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Benchmarking of energy demand of residential buildings

  • Coma Arpón, Julià
  • Maldonado, José Miguel
  • Gracia Cuesta, Alvaro de
  • Gimbernat, Toni
  • Botargues, Teresa
  • Cabeza, Luisa F.
Solar thermal energy has been adopted in medium and long‐term energy strategies within EU countries for increasing the energy efficiency of buildings. In this context, the overall objective of this project consists in developing an innovative high performance and cost effective hybrid system (solar heat and electrical power). The initial application is to be implemented in residential buildings for on‐site electricity and heat generation using solar thermal energy. The proposed technology is expected to deliver 60% of domestic energy requirements (heating and domestic hot water) and provide 20% reduction in energy costs and greenhouse gas emissions compared to the best existing low carbon energy technologies. A benchmark on the energy demand for the different types of residential buildings in Europe serves as reference scenario to evaluate the potential applicability of the different existing renewable technologies and to establish a comparative framework in terms of quantitative values. Thus, the specific aim of this study consists in performing a state‐of‐the‐art on the different building typologies, which can host this technology, and their energy demands for heating and domestic hot water, as well as their associated CO2 emissions., This study has received funding from European Union’s Horizon 2020 research and innovation programme under grant agreement Nº723596 (Innova MicroSolar) and Nº 657466 (INPATH‐TES). The work is partially funded by the Spanish government ENE2015‐64117‐ C5‐1‐R (MINECO/FEDER) and ENE2015‐64117‐C5‐3‐R (MINECO/FEDER). GREA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2014 SGR 123). Alvaro de Gracia would like to thank Ministerio de Economía y Competitividad de España for Grant Juan de la Cierva, FJCI‐2014‐19940.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Innovative concentrated solar micro organic Rankine cycle plant system for residential buildings

  • Maldonado, José Miguel
  • Gracia Cuesta, Alvaro de
  • Mahkamov, Khamid
  • Costa, Carolina
  • Kenisarin, Murat
  • Pili, Piero
  • Manca, Roberto
  • Leroux, Arthur
  • Mintsa, André Charles
  • Bartolini, Carlo M.
  • Pirro, Matteo
  • Lynn, Kevin
  • Mullen, David
  • Halimic, Elvedin
  • Cioccolanti, Luca
  • Arteconi, Alessia
  • Gimbernat, Toni
  • Botargues, Teresa
  • Cabeza, Luisa F.
Reducing the energy consumption in the building sector, as well as its associated CO2 emissions, is one of the main environmental concerns at worldwide level. In developed countries, the building sector means 41% of the total energy consumption and 40% of the total greenhouse gases emissions. To improve the energy efficiency of residential buildings, several energy strategies were carried out in European countries to encourage the development of active energy saving systems; such as the solar thermal energy. The presented study is in the frame of the Innova MicroSolar European project, which is sponsored by the European Union’s Horizon 2020 research and innovation programme. The main goal of this project is to develop an innovative concentrated solar heat and power system for residential buildings, which supplies 2-kWelec and 18-kWth. This technology includes a concentrated solar system, a high performance micro organic Rankine cycle (ORC) turbine, and an enhanced latent heat thermal energy storage (LHTES). The solar system is based on linear Fresnel mirrors which are considerably easier and cheaper to manufacture than their parabolic equals. Also, the mirrors are led by a sun tracking mechanism so they are always focusing the absorber tubes, heating up to 295ºC the heat transfer fluid (HTF) flow. The total area of the real scale prototype solar field is 140 square metres, which could provide from 80 to 15 kWth. The micro ORC technology is equipped with a high speed permanent magnet AC alternator able to supply 2.3 kWel. The ORC block has to be fed with 22 kWth. Finally, the TES tank consists of two main blocks, the PCM tank and the enhanced heat sink. Both blocks are connected between them by reversible heat pipes as heat carrier. The storage is designed to supply 25 kWth during four working hours. The whole system will supply 60% of the total building energy demand, reducing the energy cost up to 20%, as well as the greenhouse gases emissions when comparing against the best renewable energy technologies available on the market. This study shows the first experiments of the whole systems. The HTF (Therminol 62) is heated up to 270ºC with the solar field, then the HTF is lead to the ORC evaporator and the organic fluid (cyclopenthane) evaporates and runs the turbine. The TES tank is charged when the solar field reaches maximum power levels. Once the solar production cannot run the ORC, the solar field is bypassed and the TES tank successfully becomes the main energy supplier., The research leading to these results has received funding from the European Union´s Horizon 2020 Research & Innovation Programme under Grant Agreement 723596 with reference name Innova MicroSolar. This work was partially funded by Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER)). José Miguel Maldonado would like to thank the Spanish Government for his research fellowship (BES-2016-076554). Alvaro de Gracia has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 712949 (TECNIOspring PLUS) and from the Agency for Business Competitiveness of the Government of Catalonia. The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREiA (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Benchmarking of energy demand of domestic and small business buildings

  • Coma Arpón, Julià
  • Maldonado, José Miguel
  • Gracia Cuesta, Alvaro de
  • Gimbernat, Toni
  • Botargues, Teresa
  • Cabeza, Luisa F.
In Europe the building sector represents 41% of the final energy consumption and the 40% of the total GHG emissions of end-use sectors (Directive 2010/31/EU) [1]. Solar energy is one of the forms of renewable energy that has great potential to enable EU the ambition of 12% of heating coming from renewable sources by 2020 [2]. Within this context, the overall objective of the project Innovative Micro Solar Heat and Power System (Innova MicroSolar) is to develop a high performance and cost effective solar heat and power system, which consist in a novel flat Fresnel mirror solar concentrating collector and micro organic Rankine cycle plant combined with advanced phase change materials as thermal storage, all system managed by smart control units. This technology will be initially implemented in individual dwellings and small business residential buildings for on-site electricity and heat generation using solar thermal energy., This study has received funding from European Union’s Horizon 2020 research and innovation programme under grant agreement Nº723596 (Innova MicroSolar) and Nº 657466 (INPATHTES), from the European Commission Seventh Framework Programme (FP/2007-2013) under grant agreement Nº PIRSES-GA-2013-610692 (INNOSTORAGE). The work is partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER) and ENE2015- 64117-C5-3-R (MINECO/FEDER)). GREA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2014 SGR 123). Alvaro de Gracia would like to thank Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva, FJCI-2014-19940.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Optimization of coupled building roof solar reflectance and thermal insulation level for annual energy saving under different climate zones

  • Piselli, Cristina
  • Pisello, Anna Laura
  • Gracia Cuesta, Alvaro de
  • Saffari Tabalvandani, Mohammad
  • Cotana, Franco
  • Cabeza, Luisa F.
The aim of this work is to assess building energy performance optimization potential of cool roof solutions in different climate conditions worldwide through dynamic thermal-energy simulation and optimization analysis. Moreover, given the dependence of roof performance on insulation level, the influence of roof insulation variation on optimum roof solar reflectance is evaluated. Therefore, the multi-dimensional optimization of combined building roof solar reflectance capability and thermal insulation level is carried out to minimize annual energy consumption for air-conditioning of standard ASHRAE building model for small offices, in each considered climate zone. Findings of this research highlight how the classic approach of super-insulated buildings for energy saving needs to be reframed for the office case, by integrating other passive solutions for truly environmentally friendly and comfortable buildings., The research leading to these results has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement N°657466 (INPATH-TES). The work is partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER) and ENE2015-64117-C5-3-R (MINECO/FEDER)). The authors from the University of Lleida would like to thank the Catalan Government for the quality accreditation given to their research group (2014 SGR 123). Anna Laura Pisello’s acknowledgments are due to the UNESCO Chair “Water Resources Management and Culture”, for supporting her research. Alvaro de Gracia would like to thank Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva, FJCI-2014-19940.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Ensayos preliminares de una microturbina de ciclo orgánico de Rankine alimentada por un campo solar de concentración tipo Fresnel lineala

  • Maldonado, José Miguel
  • Gracia Cuesta, Alvaro de
  • Mahkamov, Khamid
  • Costa, Carolina
  • Kenisarin, Murat
  • Pili, Piero
  • Manca, Roberto
  • Leroux, Arthur
  • Mintsa, André Charles
  • Bartolini, Carlo M.
  • Pirro, Matteo
  • Lynn, Kevin
  • Mullen, David
  • Halimic, Elvedin
  • Cabeza, Luisa F.
El propósito de esta investigación es evaluar la influencia del tipo de cemento en sí mismo a altas temperaturas, desestimando el resto de componentes del hormigón. El presente estudio se centra en la comparación del tratamiento de dos tipos de cemento, a saber, cemento Portland (OPC) y cemento aluminoso (cemento de aluminato de calcio, CAC). Se determina las características físicas y resistencias mecánicas a compresión. A pesar de la resistencia a altas temperaturas del CAC y la baja relación agua/cemento (a/c) utilizada, este tipo de pasta de cemento requiere de un curado inminente. Si tal hidratación no se ejecuta en sus primeras edades, la pasta de CAC muestra un comportamiento similar a la pasta de OPC, desaprovechando tanto sus características refractarias como sus altas resistencias mecánicas iniciales., The purpose of this investigation is to evaluate the influence of cement type itself, at high temperatures, disregarding the rest of the concrete components. The present study focuses on the treatment comparison of two cement types, known as, ordinary Portland cement (OPC) and calcium aluminate cement (CAC). The physical characteristics and compressive strength are determined. Despite the resistance to high temperatures of the CAC and the low water/cement (w/c) ratio used, this type of cement paste requires an imminent cure at certain temperature. If such hydration is not carried out in its early ages, the CAC paste shows a behavior similar to OPC paste, wasting both its refractory characteristics and its high initial mechanical resistances., Este trabajo ha sido parcialmente financiado el programa de Investigación y Desarrollo H2020 de la Unión Europea, a través del Grant Agreement 723596, cuyo nombre de referencia es Innova MicroSolar. Este trabajo ha sido cofinanciado por el Ministerio de Economía y Competitividad de España (ENE2015-64117-C5-1-R (MINECO/FEDER) y ENE2015-64117-C5-3-R (MINECO/FEDER)). Los autores quieren agradecer al Gobierno de Cataluña por la acreditación de calidad otorgada a su grupo de investigación (2017 SGR 1537). GREA es un agente TECNIO certificado en la categoría de desarrolladores tecnológicos por el Gobierno de Cataluña. José Miguel Maldonado agradece al Gobierno de España la concesión de la ayuda para contratos predoctorales para la formación de doctores (BES-2016-076554). Alvaro de Gracia agradece los fondos recibidos del programa de Investigación y Desarrollo H2020 de la Unión Europea, a través del Marie Sklodowska-Curie Grant Agreement No 712949.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Micro-encapsulated PCM in concrete matrix after a decade of the building construction

  • Olivieri, Lorenzo
  • Tenorio Ríos, José Antonio
Trabajo presentado a la 14th International Energy Storage Conference (EnerSTOCK), celebrada en la Universidad de Çukurova (Turquía) del 25 al 28 de abril de 2018., The reduction of the energy consumed in the building sector is no more a recommendation, but a duty of our society. Thermal energy storage (TES) implementation into buildings envelope has been highlighted as a promising technology to reduce the energy demand in buildings. Last decade, many literature have been dealing with the effect of the inclusion of latent heat storage materials in construction materials to provide higher thermal inertia. Several studies focused on the evaluation of the thermal properties, density, or porosity of these new materials. However, few of them focused on the long stability properties of the materials with embedded PCM when included in a building, since the lifetime of a building last around 50 years. In this study, an evaluation of a house-like cubicle of concrete with micro-encapsulated PCM after a decade of its construction is done. The results of this study were compared to the tests done in 2005 concluding that the thermal performance of this cubicle presented no degradation in the PCM effect., The work partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER), ENE2015-64117-C5-3-R (MINECO/FEDER), ULLE10-4E-1305, and ENE2005-08256-C02-01). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2014 SGR 123) and the city hall of Puigverd de Lleida. GREA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 657466 (INPATH-TES). Financiado por el proyecto RTC-2015-3583-5 (INPHASE) del Ministerio de Economía y Competitividad, dentro del Programa Estatal de Investigación, Desarrollo e Innovación Orientada a los Retos de la Sociedad, en el marco del Plan Estatal de Investigación Científica y Técnica y de Innovación 2013-2016, y ha sido cofinanciado con FONDOS FEDER, con el objetivo de promover el desarrollo tecnológico, la innovación y una investigación de calidad.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Benchmarking of energy demand of residential buildings

  • Coma Arpón, Julià
  • Maldonado, José Miguel
  • Gracia Cuesta, Alvaro de
  • Gimbernat, Toni
  • Botargues, Teresa
  • Cabeza, Luisa F.
Solar thermal energy has been adopted in medium and long‐term energy strategies within EU countries for increasing the energy efficiency of buildings. In this context, the overall objective of this project consists in developing an innovative high performance and cost effective hybrid system (solar heat and electrical power). The initial application is to be implemented in residential buildings for on‐site electricity and heat generation using solar thermal energy. The proposed technology is expected to deliver 60% of domestic energy requirements (heating and domestic hot water) and provide 20% reduction in energy costs and greenhouse gas emissions compared to the best existing low carbon energy technologies. A benchmark on the energy demand for the different types of residential buildings in Europe serves as reference scenario to evaluate the potential applicability of the different existing renewable technologies and to establish a comparative framework in terms of quantitative values. Thus, the specific aim of this study consists in performing a state‐of‐the‐art on the different building typologies, which can host this technology, and their energy demands for heating and domestic hot water, as well as their associated CO2 emissions., This study has received funding from European Union’s Horizon 2020 research and innovation programme under grant agreement Nº723596 (Innova MicroSolar) and Nº 657466 (INPATH‐TES). The work is partially funded by the Spanish government ENE2015‐64117‐ C5‐1‐R (MINECO/FEDER) and ENE2015‐64117‐C5‐3‐R (MINECO/FEDER). GREA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2014 SGR 123). Alvaro de Gracia would like to thank Ministerio de Economía y Competitividad de España for Grant Juan de la Cierva, FJCI‐2014‐19940.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Comparative analysis of energy demand and CO2 emissions of residential buildings, Benchmarking of energy demand and CO2 emissions of domestic residential buildings

  • Coma Arpón, Julià
  • Maldonado, José Miguel
  • Gracia Cuesta, Alvaro de
  • Gimbernat, Toni
  • Botargues, Teresa
  • Cabeza, Luisa F.
Rapid expansion of solar thermal energy for increasing energy efficiency of buildings has been adopted in short/medium and long-term energy strategies of EU countries. Within this context, the overall objective of this work is to develop an innovative high performance and cost effective hybrid solar heat and power system. The initial application is to be implemented in individual dwellings and small business residential buildings for onsite electricity and heat generation using solar thermal energy. It is estimated that the proposed technology will deliver 60% of domestic energy requirements and provide 20% reduction in energy costs and greenhouse gas emissions compared to the best existing low carbon energy technologies. The aim of this study consists in performing a comparative analysis of the different building typologies, which can host this technology, and their energy demands for heating and domestic hot water, as well as their CO2 emissions., This study has received funding from Eurepean Union's Horizon 2020 research and innovation programme under grant agreement Nº 723596 (Innova MicroSolar) and Nº 657466 (INPATH-TES). The work is partially funded by the Sapnish government ENE2015-64117-C5-1-R (MINECO/FEDER) and ENE2015-64117-C5-3-R (MINECO/FEDER). GREA is certified agent TECNIO in the cathegory of technology developers from the Government of Catalonia. The authors would like to thanks the Calatan Governmnet for the quality accreditation given to their research group (2014 SGR 123). Alvaro de Gracia would like to thanks Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva, FJCI-2014-19940.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Example of an Innovative Initiative for Education in Thermal Energy Storage: INPATH-TES Project

  • Zsembinszki, Gabriel
  • Cabeza, Luisa F.
Following the EC SET-Plan Education and Training Roadmap, the goal of INPATH-TES is to create a network of academia, research institutes and small and medium-sized enterprises (SMEs) to implement a joint PhD programme on Thermal Energy Storage (TES) technologies. The project consortium consists of 22 partners from academia, industry and SMEs from 14 different countries. The final result of such a network is to educate professionals on these technologies for the European research and industry institutions. Some of the main challenges identified so far consist of the development of the programme, the implementation of the programme in each country/institution, and to ensure the continuity of the programme after EU funding ends., The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2014 SGR 123). GREA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. This study has received funding from European Union’s Horizon 2020 research and innovation programme under grant agreement Nº 657466 (INPATH-TES). The work is partially funded by the Spanish government ENE2015-64117-C5-1-R (MINECO/FEDER).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Optimization of coupled building roof solar reflectance and thermal insulation level for annual energy saving under different climate zones

  • Piselli, Cristina
  • Pisello, Anna Laura
  • Gracia Cuesta, Alvaro de
  • Saffari Tabalvandani, Mohammad
  • Cotana, Franco
  • Cabeza, Luisa F.
The aim of this work is to assess building energy performance optimization potential of cool roof solutions in different climate conditions worldwide through dynamic thermal-energy simulation and optimization analysis. Moreover, given the dependence of roof performance on insulation level, the influence of roof insulation variation on optimum roof solar reflectance is evaluated. Therefore, the multi-dimensional optimization of combined building roof solar reflectance capability and thermal insulation level is carried out to minimize annual energy consumption for air-conditioning of standard ASHRAE building model for small offices, in each considered climate zone. Findings of this research highlight how the classic approach of super-insulated buildings for energy saving needs to be reframed for the office case, by integrating other passive solutions for truly environmentally friendly and comfortable buildings., The research leading to these results has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement N°657466 (INPATH-TES). The work is partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER) and ENE2015-64117-C5-3-R (MINECO/FEDER)). The authors from the University of Lleida would like to thank the Catalan Government for the quality accreditation given to their research group (2014 SGR 123). Anna Laura Pisello’s acknowledgments are due to the UNESCO Chair “Water Resources Management and Culture”, for supporting her research. Alvaro de Gracia would like to thank Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva, FJCI-2014-19940.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Innovative concentrated solar micro organic Rankine cycle plant system for residential buildings

  • Maldonado, José Miguel
  • Gracia Cuesta, Alvaro de
  • Mahkamov, Khamid
  • Costa, Carolina
  • Kenisarin, Murat
  • Pili, Piero
  • Manca, Roberto
  • Leroux, Arthur
  • Mintsa, André Charles
  • Bartolini, Carlo M.
  • Pirro, Matteo
  • Lynn, Kevin
  • Mullen, David
  • Halimic, Elvedin
  • Cioccolanti, Luca
  • Arteconi, Alessia
  • Gimbernat, Toni
  • Botargues, Teresa
  • Cabeza, Luisa F.
Reducing the energy consumption in the building sector, as well as its associated CO2 emissions, is one of the main environmental concerns at worldwide level. In developed countries, the building sector means 41% of the total energy consumption and 40% of the total greenhouse gases emissions. To improve the energy efficiency of residential buildings, several energy strategies were carried out in European countries to encourage the development of active energy saving systems; such as the solar thermal energy. The presented study is in the frame of the Innova MicroSolar European project, which is sponsored by the European Union’s Horizon 2020 research and innovation programme. The main goal of this project is to develop an innovative concentrated solar heat and power system for residential buildings, which supplies 2-kWelec and 18-kWth. This technology includes a concentrated solar system, a high performance micro organic Rankine cycle (ORC) turbine, and an enhanced latent heat thermal energy storage (LHTES). The solar system is based on linear Fresnel mirrors which are considerably easier and cheaper to manufacture than their parabolic equals. Also, the mirrors are led by a sun tracking mechanism so they are always focusing the absorber tubes, heating up to 295ºC the heat transfer fluid (HTF) flow. The total area of the real scale prototype solar field is 140 square metres, which could provide from 80 to 15 kWth. The micro ORC technology is equipped with a high speed permanent magnet AC alternator able to supply 2.3 kWel. The ORC block has to be fed with 22 kWth. Finally, the TES tank consists of two main blocks, the PCM tank and the enhanced heat sink. Both blocks are connected between them by reversible heat pipes as heat carrier. The storage is designed to supply 25 kWth during four working hours. The whole system will supply 60% of the total building energy demand, reducing the energy cost up to 20%, as well as the greenhouse gases emissions when comparing against the best renewable energy technologies available on the market. This study shows the first experiments of the whole systems. The HTF (Therminol 62) is heated up to 270ºC with the solar field, then the HTF is lead to the ORC evaporator and the organic fluid (cyclopenthane) evaporates and runs the turbine. The TES tank is charged when the solar field reaches maximum power levels. Once the solar production cannot run the ORC, the solar field is bypassed and the TES tank successfully becomes the main energy supplier., The research leading to these results has received funding from the European Union´s Horizon 2020 Research & Innovation Programme under Grant Agreement 723596 with reference name Innova MicroSolar. This work was partially funded by Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER)). José Miguel Maldonado would like to thank the Spanish Government for his research fellowship (BES-2016-076554). Alvaro de Gracia has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 712949 (TECNIOspring PLUS) and from the Agency for Business Competitiveness of the Government of Catalonia. The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREiA (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Benchmarking of energy demand of domestic and small business buildings

  • Coma Arpón, Julià
  • Maldonado, José Miguel
  • Gracia Cuesta, Alvaro de
  • Gimbernat, Toni
  • Botargues, Teresa
  • Cabeza, Luisa F.
Rapid expansion of solar thermal energy for increasing energy efficiency of buildings has been adopted in short/medium and long-term energy strategies of EU countries. This enhancement of energy efficiency in buildings is in line with regional actions with the European climate energy objectives as defined in the European Union’s “20-20-20” targets and in the European Commission’s Energy Roadmap 2050. Within this context, the overall objective of this work is to develop an innovative high performance and cost effective hybrid solar heat and power system, which consist in a novel flat Fresnel mirror solar concentrating collector and micro organic Rankine cycle plant combined with advanced phase change materials as thermal storage, all system managed by smart control units. The initial application is to be implemented in individual dwellings and small business residential buildings for on-site electricity and heat generation using solar thermal energy. It is estimated that the proposed technology will deliver 60% of domestic energy requirements and provide 20% reduction in energy costs and greenhouse gas emissions compared to the best existing low carbon energy technologies. To reach the main objectives, the first step consist in providing information on features of architecture of domestic and small business residential buildings and their annual energy demands for different countries such as: Spain, France Germany, Italy, and United Kingdom. This will include detailed building information of envelopes (walls, roof, lofts, etc.), structure, fabric, and results of energy demands (domestic hot water, space heating and electricity) for the abovementioned countries. This information will be used as input data during the development of this technology as it will point out the potential benefits of the system in different countries, climates, and building typologies., This study has received funding from European Union’s Horizon 2020 research and innovation programme under grant agreement Nº723596 (Innova MicroSolar) and Nº 657466 (INPATH-TES), from the European Commission Seventh Framework Programme (FP/2007-2013) under grant agreement Nº PIRSES-GA-2013-610692 (INNOSTORAGE). The work is partially funded by the Spanish government ENE2015- 64117-C5-1-R (MINECO/FEDER), ENE2015-64117-C5-3-R (MINECO/FEDER) and (ULLE10-4E-1305). GREA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2014 SGR 123). Alvaro de Gracia would like to thank Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva, FJCI-2014-19940.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Corrosion inhibitors for TES material at high temperature for CSP plants

  • Fernández, Ángel G.
  • Cabeza, Luisa F.
Molten salt technology using nitrate salts as thermal energy storage material is the current state-of-the-art of concentrated solar power technology and power tower central receivers are currently limited by the maximum operating temperature of their working fluid. The limit of solar salt (60wt.%NaNO3 + 40wt.%KNO3) thermal stability is around 565°C with ambient air as the cover gas. In order to obtain higher efficiency goals using molten salt technologies working at higher temperatures (e.g., 650°C to 750°C), a different salt chemistry is required for new generation of CSP plants and chlorides molten salts could be a feasible option. Corrosion mitigation could solve the current issues related with the use of chloride salt at high temperature. In this work, the proposal of different corrosion mitigation strategies has been evaluated, as well as the identification of the most corrosive impurities present in the ternary chloride salt composed by MgCl2/KCl/NaCl (60/20/20 mol%). For this purpose, electrochemical impedance spectroscopy tests were carried out at 700°C on austenitic stainless steel (AISI 304) and a Ni base alloy (Inconel 702) during 100 hours. In this case, MgOHCl was identified as the main important corrosive impurity, present in the chloride salt, to control in the storage system. Regarding the materials tested, Ni base alloy (Inconel 702) showed the most promising results for their use as container material., The research leading to these results has received funding from Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER)). The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREiA (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. Angel G. Fernández wants to acknowledge the financial support from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant No 712949 (TECNIOspring PLUS) and from the Agency for Business Competitiveness of the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Phase change material selection for two innovative compact energy storage systems in residential buildings

  • Zsembinszki, Gabriel
  • Gasia, Jaume
  • Oró Prim, Eduard
  • Cabeza, Luisa F.
Within the framework of HYBUILD, an EU Horizon 2020-funded project, two innovative compact hybrid electrical/thermal storage systems for stand-alone and district connected residential buildings will be developed and tested in three demos located in Spain, France, and Cyprus. One of the innovative systems is aimed to be placed in buildings located in Mediterranean climate regions, where cooling loads are dominant, while the other system is intended for Continental climate regions, where the heating demand is dominant. Each system will include, among others components such as a sorption storage system and domestic hot water tanks, a latent thermal energy storage (LTES) system that will be connected to a heat pump through an innovative heat exchanger made of aluminium and filled with phase change material (PCM). In both cases, the heat pump works with electricity provided by a photovoltaic system that is, at the same time, connected to an electrical storage battery. The aim of using the LTES system is to enhance the use of solar energy, which will be translated into a reduction of the building energy consumption and related costs. This study focuses on the selection of the most suitable PCM to be used in each system. On the one hand, the LTES system of the Mediterranean system will be used to store cold to reduce the cooling demand. Taking into account that, according to the design parameters, the heat pump will require a refrigerant evaporation temperature around 2 ºC, and the building cooling system will require water supply in the range from 7 ºC to 12 ºC, the PCM melting temperature range should be within 0 ºC and 7 ºC. On the other hand, the LTES system of the Continental system will be used to store heat to reduce the domestic hot water (DHW) demand. The LTES will be located at the compressor outlet and will be charged by the hot refrigerant that exits the compressor at temperatures as high as 120 ºC. During the discharge process, the heat stored in the LTES will be supplied to the DHW at a temperature in the range between 50 ºC to 55 ºC. As a consequence, the range for the PCM melting temperature investigated in this case should be between 62 ºC and 68 ºC. Besides the melting temperature, other selection criteria considered include the PCM melting enthalpy and melting range, maximum allowed working temperature, density, thermal conductivity, availability, cost, and compatibility with aluminium. To decide the ideal PCM candidate for each system, a decision matrix was defined and used, by applying a weighted score to the selection criteria items according to their importance. The preliminary results indicate that for the Mediterranean system the best candidate is the commercial savE OM3 PCM, while for the Continental system, another commercial product PureTemp 63 is the most adequate option., This work was partially funded by the Ministerio de Economía y Competitividad de España (ENE2015- 64117-C5-1-R (MINECO/FEDER)). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (GREiA 2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. Jaume Gasia would like to thank the Departament d'Universitats, Recerca i Societat de la Informació de la Generalitat de Catalunya for his research fellowship (2018 FI_B2 00100). This project has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No 768824 (HYBUILD)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Benchmarking of energy demand of domestic and small business buildings

  • Coma Arpón, Julià
  • Maldonado, José Miguel
  • Gracia Cuesta, Alvaro de
  • Gimbernat, Toni
  • Botargues, Teresa
  • Cabeza, Luisa F.
In Europe the building sector represents 41% of the final energy consumption and the 40% of the total GHG emissions of end-use sectors (Directive 2010/31/EU) [1]. Solar energy is one of the forms of renewable energy that has great potential to enable EU the ambition of 12% of heating coming from renewable sources by 2020 [2]. Within this context, the overall objective of the project Innovative Micro Solar Heat and Power System (Innova MicroSolar) is to develop a high performance and cost effective solar heat and power system, which consist in a novel flat Fresnel mirror solar concentrating collector and micro organic Rankine cycle plant combined with advanced phase change materials as thermal storage, all system managed by smart control units. This technology will be initially implemented in individual dwellings and small business residential buildings for on-site electricity and heat generation using solar thermal energy., This study has received funding from European Union’s Horizon 2020 research and innovation programme under grant agreement Nº723596 (Innova MicroSolar) and Nº 657466 (INPATHTES), from the European Commission Seventh Framework Programme (FP/2007-2013) under grant agreement Nº PIRSES-GA-2013-610692 (INNOSTORAGE). The work is partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER) and ENE2015- 64117-C5-3-R (MINECO/FEDER)). GREA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2014 SGR 123). Alvaro de Gracia would like to thank Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva, FJCI-2014-19940.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Ensayos preliminares de una microturbina de ciclo orgánico de Rankine alimentada por un campo solar de concentración tipo Fresnel lineala

  • Maldonado, José Miguel
  • Gracia Cuesta, Alvaro de
  • Mahkamov, Khamid
  • Costa, Carolina
  • Kenisarin, Murat
  • Pili, Piero
  • Manca, Roberto
  • Leroux, Arthur
  • Mintsa, André Charles
  • Bartolini, Carlo M.
  • Pirro, Matteo
  • Lynn, Kevin
  • Mullen, David
  • Halimic, Elvedin
  • Cabeza, Luisa F.
El propósito de esta investigación es evaluar la influencia del tipo de cemento en sí mismo a altas temperaturas, desestimando el resto de componentes del hormigón. El presente estudio se centra en la comparación del tratamiento de dos tipos de cemento, a saber, cemento Portland (OPC) y cemento aluminoso (cemento de aluminato de calcio, CAC). Se determina las características físicas y resistencias mecánicas a compresión. A pesar de la resistencia a altas temperaturas del CAC y la baja relación agua/cemento (a/c) utilizada, este tipo de pasta de cemento requiere de un curado inminente. Si tal hidratación no se ejecuta en sus primeras edades, la pasta de CAC muestra un comportamiento similar a la pasta de OPC, desaprovechando tanto sus características refractarias como sus altas resistencias mecánicas iniciales., The purpose of this investigation is to evaluate the influence of cement type itself, at high temperatures, disregarding the rest of the concrete components. The present study focuses on the treatment comparison of two cement types, known as, ordinary Portland cement (OPC) and calcium aluminate cement (CAC). The physical characteristics and compressive strength are determined. Despite the resistance to high temperatures of the CAC and the low water/cement (w/c) ratio used, this type of cement paste requires an imminent cure at certain temperature. If such hydration is not carried out in its early ages, the CAC paste shows a behavior similar to OPC paste, wasting both its refractory characteristics and its high initial mechanical resistances., Este trabajo ha sido parcialmente financiado el programa de Investigación y Desarrollo H2020 de la Unión Europea, a través del Grant Agreement 723596, cuyo nombre de referencia es Innova MicroSolar. Este trabajo ha sido cofinanciado por el Ministerio de Economía y Competitividad de España (ENE2015-64117-C5-1-R (MINECO/FEDER) y ENE2015-64117-C5-3-R (MINECO/FEDER)). Los autores quieren agradecer al Gobierno de Cataluña por la acreditación de calidad otorgada a su grupo de investigación (2017 SGR 1537). GREA es un agente TECNIO certificado en la categoría de desarrolladores tecnológicos por el Gobierno de Cataluña. José Miguel Maldonado agradece al Gobierno de España la concesión de la ayuda para contratos predoctorales para la formación de doctores (BES-2016-076554). Alvaro de Gracia agradece los fondos recibidos del programa de Investigación y Desarrollo H2020 de la Unión Europea, a través del Marie Sklodowska-Curie Grant Agreement No 712949.