Pasar al contenido principal

NANOSTRUCTURED MULTILAYERED ARCHITECTURES FOR THE DEVELOPMENT OF OPTOFLUIDIC RESPONSIVE DEVICES, SMART LABELS AND ADVANCED SURFACE FUNCTIONALIZATION

MAT2016-79866-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2016
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Metal films by laser ablation backwriting on glass

  • Angurel, Luis A.
  • Molina Mansilla, Ricardo
  • Rico, Víctor J.
  • Yubero, Francisco
  • González-Elipe, Agustín R.
  • Muñoz Rojas, David
  • Huerta, C. M. de la
  • Nguyen, V. H.
  • Fuente, Germán F. de la
Resumen del trabajo presentado a la Science and Applications of Thin Films, Conference & Exhibition; celebrada en Izmir (Turquia) del 17 al 21 de septiembre de 2018., The use of lasers to achieve transformations at interfaces, either on solids under air, controlled atmospheres or a diversity of liquid environments, is evolving at a fast pace and in-line with recent advances in photonic technologies. The singular properties of lasers, which provide a choice of emission parameters, such as emission wavelength, pulsed or cw mode and pulse width, together with the use of optomechanical means to scan in beam or line fashion, are ideal in order to trigger physico-chemical phenomena which are not available with alternative methods and are, at large, based on thermally activated processes. Recently developed methods in our Laboratories include those that are based, on the one hand, on strongly photothermal interactions; on the other, on mixed type interactions, where photothermal, photophysical and, in some cases, photochemical types may cohexist. In the former case, a solid may melt and, with the controled laser movement, directionally solidify into a material with controlled microstructure. In the latter case, an ablation process with extreme physical or chemical consequences may be triggered and be localised at the irradiated interface. A brief description of the phenomena behind laser-solid interactions will be presented, along with results obtained with the Laser Ablation Backwriting (LAB) method and applied to surface modification of glass. This has been recently developed in order to modify physico-chemical and functional properties of glass surfaces at large, based on this fully scaleable method. In particular, selective metallization of glass surfaces will be addressed in this talk., This research is partially supported by projects MAT2016-79866-R, ENE2017-83669-C4-1-R (Agencia Estatal de Investigación & Programa FEDER), PHOBIC2ICE (EU GA 690819) and SPRINT (EU H2020-FETOPEN 801464)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Influence of crystallographic texture and external electromagnetic fields on sub-ns pulsed UV laser derived nanostructures

  • Porta-Velilla, L.
  • Cubero, A.
  • Castro, Miguel
  • Martínez Fernández, Elena
  • Angurel, Luis A.
  • Fuente, Germán F. de la
  • Navarro, Rafael
Resumen del trabajo presentado al European Congress and Exhibition on Advanced Materials and Processes (EUROMAT), celebrado en Estocolmo (Suecia) del 1 al 5 de septiembre de 2019., [Introduction/Purpose]: Generation of Laser-induced Periodic Surface Structures (LIPSS) is a general phenomenon that has been observed in a broad range of materials and intensively studied since the commercial availability of ultra-short pulsed lasers. It has been observed that the morphology of LIPSS can be controlled by the selection of adequate laser processing parameters., [Methods]: In this work, we have analysed the generation of LIPSS in different metal surfaces using a sub-ns (300 ps) pulsed UV laser, with a laser-line scanning configuration. In addition to the laser parameters, different variables that can modify how LIPSS are generated, have been explored. EBSD studies have been used to determine the crystallographic direction of each grain at the surface of the material and how it modifies the characteristics of nanostructure generation. Experiments have also been performed under different electromagnetic fields during laser processing., [Results]: It has been observed that crystallographic orientation of grains has a significant influence on the generation of nanostructures. When prominent cones are generated, they appear only in some grains with a given orientation, for instance, (001) planes in stainless steel. In the case of ripples, period, size and orientation are also modified. For some configurations of external electromagnetic fields, the uniformity of the nanostructure can also be improved in extended areas., [Conclusions]: It is well established that nature and ordering of LIPSS nanostructures depend on the laser parameters, mainly irradiance and polarization, and on the material. In this work, it has been determined that for a given material, this order can be modified depending on the crystallographic orientation of each particular grain and using adequate external electromagnetic fields., The authors gratefully acknowledge the financial support from MINECO-AEI-FEDER (project ENE2017-83669-C4-1-R and MAT2016-79866-R), from PHOBIC2ICE (EU GA 690819) and SPRINT (EU H2020-FET-OPEN/0426) projects and from Gobierno de Aragón (research group T54_17R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Metal surface nanostructures developed with sub-ns UV laser line scanning under different atmospheres

  • Fuente, Germán F. de la
  • Angurel, Luis A.
  • Cubero, A.
  • Porta-Velilla, L.
  • Castro, Miguel
  • Rojo, J. A.
  • Martínez Fernández, Elena
  • Navarro, Rafael
Resumen del trabajo presentado al International Symposium Fundamentals of Laser Assisted Micro- & Nanotechnologies (FLAMN), celebrado en San Petersburgo (Rusia) del 30 de junio al 4 de julio de 2019., Work financed by MAT2016-79866-R & ENE2017-83669-C4-1-R (MINECO-AEI-FEDER, UE), PHOBIC2ICE (EU GA 690819) and SPRINT (EU H2020-FET-OPEN/0426) and Aragón Government (Research Group T54_17R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Laser induced high temperature surface chemistry

  • Rey-García, F.
  • Rico, Víctor J.
  • Bao-Varela, C.
  • Angurel, Luis A.
  • González-Elipe, Agustín R.
  • Fuente, Germán F. de la
Resumen del póster presentado a la XXXVII Reunión Bienal de la Real Sociedad Española de Química, celebrada en Donostia-San Sebastián del 26 al 30 de mayo de 2019., Ceramic tiles are widely used as construction materials because of their outstanding mechanical properties (high strength, hardness, toughness and abrasion resistance), chemical inertness and aesthetic appearance. Concomitantly, a variety of new functionalities have been demonstrated during recent years, by developing appropriate frit and glaze compositions. Laser processing has been intensively utilized to improve surface characteristics, either applying ablative laser regimes or intense mid-IR emission beams that enable high temperature surface melting. In this context, in addition to the numerous thermal annealing procedures reported in the literature and applied to industry to modify the surface properties of ceramics, a novel Laser Furnace (LF) method has been recently patented. It enables modifying the surface finish of solids by inducing high temperature (1500-3000 °C) reactions at surfaces and interfaces, while maintaining volume temperatures at relatively low values (i.e. below 1200 °C). This paper deals with the application of this laser technology to the coloring of ceramic tiles previously deposited with either metal and oxide precursor thin films, or, alternatively with noble metal-organic layers. These layer/tile systems have been treated both, with nIR ns pulsed lasers and by cw CO2 lasers with emission in the mid-IR. The latter were coupled into a roller furnace to induce chemical processes which result in a variety of coloring effects., The authors gratefully acknowledge funding from MICINN and AEI (ENE2017-83669-C4-1-R and MAT2016-79866-R), FEDER/EU (project SPRINT (EU H2020-FET-OPEN/0426)) and Gobierno de Aragón (research group T54_17R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Laser line scanning for large area surface microstructure control

  • Santos, H.
  • Angurel, Luis A.
  • Trujillo, F. J.
  • Muñoz Rojas, David
  • Masse, C.
  • Nguyen, V. H.
  • Bea, J. A.
  • Fuente, Germán F. de la
Resumen del póster presentado a la XXXVII Reunión Bienal de la Real Sociedad Española de Química, celebrada en Donostia-San Sebastián del 26 al 30 de mayo de 2019., Large-scale industrial materials must comply with crucial requirements beyond their technical specifications. The overall economy of any material system designed is a priority, leading to a complex equilibrium between costs and performance. Ultimate feasibility assessments rely on materials design efforts, particularly in processes exposed to extreme corrosive environments as well as those with high quality requirements in terms of interfacial defects in multilayer devices. In such systems surface engineering plays a key role, offering the means to maximize the life span of a certain material system. In parallel to the intrinsic cost savings derived in terms of maintenance, certain techniques allow an extreme control of the processing conditions, resulting in lower consumption of reactants, time and energy. This is the case of laser surface processing, particularly regarding laser line scanning (LLS). Such technique combines the transverse movement of a target with the fixed scanning linear movement of the laser spot along the axis perpendicular to the probe’s displacement. This technique has been applied to well-studied systems as Fe-Al protective coatings, rendering useful development paths to improve the alloying performance addressing subjects as: grain microstructure orientation, stoichiometric gradients smothering, segregation dispersion or interface defects density. The present work takes into account the above considerations, in an attempt to adapt this novel Laser Line Scanning method to process functional metal oxide coatings. With the help of standard simulation models, attempts to densify coated surfaces, as well as to control microstructure, will be described., The authors gratefully acknowledge the financial support from the Spanish Ministerio de Ciencia, Innovación y Universidades, Agencia Estatal de Investigación (AEI) and Fondo Europeo de Desarrollo Regional (FEDER) (project ENE2017-83669-C4-1-R and MAT2016-79866-R), from EU (project SPRINT (EU H2020-FETOPEN/0426), PHOBIC2ICE (EU GA 690819)), and from the Gobierno de Aragón “Construyendo Europa desde Aragón” (research group T54_17R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Generation of nanostructures in metallic surfaces using subnanosecond UV laser processing

  • Cubero, A.
  • Porta-Velilla, L.
  • Castro, Miguel
  • Angurel, Luis A.
  • Fuente, Germán F. de la
  • Martínez Fernández, Elena
  • Navarro, Rafael
Resumen del trabajo presentado a la International Conference on Condensed Matter and Materials Science (ICCMMS), celebrada en Adana (Turquia) del 14 al 19 de octubre de 2019., In this work we present the rich surface structure phenomenology that has been observed when the surface of different metals (Nb, Ni, steel) is irradiated with a subnanosecond (300 ps) UV laser, and how it affects some of their properties. The influence of different laser parameters, as the laser polarization direction, the pulse irradiance, laser scanning speed and the overlapping in the perpendicular direction, have been studied and a complete set of nanostructures have been defined. Laser treatments have been performed in air, but also in controlled atmospheres (Ar, N2) or with the surface immersed in liquids (Vaseline oil, water) observing that the generated nanostructures are different depending on the particular experimental conditions imposed. An important effort has been carried out in order to obtain homogeneous nanostructures over extended areas, using a new laser line scanning protocol. In these studies, it has been observed that not only the laser parameters affect the generated nanostructure, but some materials properties are also important. Combining laser treatments with EBSD studies it has been demonstrated that crystallography also plays an important role in the generated nanostructure, observing that the level of interaction of the laser with a particular grain has some correlation with its crystallographic order. It has ben also observed that, in depending on the properties of the materials, nanostructures can be modified by the application of external electromagnetic fields., The authors gratefully acknowledge the financial support from MINECO-AEI-FEDER (project ENE2017-83669-C4-1-R and MAT2016-79866-R), from PHOBIC2ICE (EU GA 690819) and SPRINT (EU H2020-FET-OPEN/0426) projects and from Gobierno de Aragón “Construyendo Europa desde Aragón” (research group T54_17R).