Pasar al contenido principal

MAGNETISMO EXOTICO Y FENOMENOS DE CORELACION DE ELECTRONES EN LA SUPERFICIE Y EL SOLIDO DE MATERIALES BASADAS EN TIERRAS RARAS

MAT2017-88374-P

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Vicinal Ag(111) surfaces with fully-kinked steps

  • Ortega, J. Enrique
  • Vasseur, Guillaume
  • Piquero-Zulaica, Ignacio
  • Matencio, Sonia
  • Raoult, Julien
  • Schiller, Frederik
  • Corso, Martina
  • Mugarza, Aitor
  • Lobo-Checa, Jorge
Resumen del trabajo presentado al Symposium on Surface Science (3S), celebrado en St. Christoph am Arlberg (Austria) del 25 de febrero al 10 de marzo de 2018., Vicinal surfaces with arrays of atomic steps have important applications in catalysis, nanostructure growth, or electronic band engineering, since steps are active sites for chemical reactions, as well as nucleation and electron scattering centers. Given the infinite possibilities for the orientation of a vicinal surface, it is important to perform systematic investigations, in order to identify optimal substrates for specific functions. Using macroscopically curved crystal samples one can systematically probe entire families of vicinal planes with standard surface science techniques. This is done here for vicinal Ag(111) surfaces featuring the so-called fully- or 100%-kinked steps. Fully-kinked monatomic steps (height h=2.35 Å) run parallel to the [112̅] direction and have six-fold atomic coordination, as compared with the seven-fold coordinated close-packed steps, which are oriented along the [11̅0] direction. In such fully-kinked Ag(111) vicinals we investigate electronic and structural properties with STM, LEED and Angle-Resolved Photoemission (ARPES), and test both the growth of BiAg2 alloys and the on-surface synthesis of zig-zag polymers. The sample is a Ag single crystal curved around the (645) direction, such that the vicinal angle α can be tuned from the Ag(111) plane, beyond the Ag(423) surface, up to α=18º. As done in previous works on close-packed Ag(111), Cu(111) and Au(111) vicinals, we study the probability distribution of the terrace size d as a function of the vicinal angle from STM images, and probe the scattering of the Shockley state at the fully-kinked step by ARPES. We find that fully-kinked vicinals exhibit exceptional ordering, allowing one to visualize the universal, structural transformation of vicinal metal surfaces with unprecedented precision. This opens the way to a fine test of statistical models of step-lattices largely debated in the past. As shown in the Figure, the Shockley state analysis reveals a much stronger scattering strength at the fully-kinked step when compared to the closed-packed, leading to a dramatic decrease of the surface electron density in vicinal surfaces, that is, to a complete electron depletion of Ag(111) terraces with d <1.6 nm. Next we tested the growth of the BiAg2 monolayer, and observed the presence of magic vicinal angles at which one can achieve atomically sharp BiAg2 step grids, ideal to explore spin scattering properties. Finally we explored the on-surface synthesis of DMTP zig-zag polymers, where we also found optimal crystal orientations to template well-oriented onedimensional chains, such as to facilitate spectroscopic characterization by ARPES., We acknowledge financial support from the Spanish Ministry of Economy (grant MAT2017-88374-P) and the Basque Government (grant IT621-13)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

In-situ oxidation of CO on a curved Pt(111) surface

  • Garcia-Martinez, Fernando
  • Ilyn, Max
  • Pérez-Dieste, Virginia
  • Escudero, Carlos
  • Hagman, Benjamin
  • Blomberg, Sara
  • Gustafson, Johan
  • Lundgren, Edvin
  • Walther, Andrew L.
  • Waluyo, Iradwikanari
  • Schiller, Frederik
Resumen del póster presentado al 5th Annual Ambient Pressure X-ray Photoelectron Spectroscopy Workshop, celebrado en Berlin (Alemania) del 11 al 14 de diciembre de 2018., The study of the catalytic CO oxidation on Pt single crystals and nanoparticles has been a wide research field since long. However, the role and the interplay among different coordination sites and facet planes has never been clarified. This is in part due to the fact that both crystal surfaces and nanoparticles undergo complex structural/chemical changes during catalytic reactions. In this context, using multi-facet samples, such as cylindrical crystals, for in-situ studies is highly desirable. We have carried out near-ambient pressure X-ray photoemission (NAP-XPS) experiments of the CO oxidation using a curved Pt(111) crystal. The figure below shows the temperature evolution of the O 1s at the (335) plane, marking the ignition temperature at 505 K. Once this is known, we freeze the reaction at fixed temperatures around the ignition point and scan the surface with the synchrotron beam. This allows us to probe surface chemical species across different crystallographic planes in stationary conditions. As a way of example, the figure (left) shows the C 1s scan across the curved surface before the ignition (480 K, poisoned stage). The temperature scan at the (111) plane (right panel) shows that, below the onset of the catalytic reaction, the surface is covered with a variety of chemisorbed CO (Chem-CO) species, in the presence of CO and O2 in the gas phase. When the ignition begins, Chem-CO is displaced by chemisorbed oxygen and Pt oxides, and this process is accompanied by the quenching of the CO gas signal, the emergence of CO2, and the rightward shift of all gas phase peaks. The XPS scan in the left panel demonstrates that, in the poisoned stage, there is a vicinal-angle-dependent variety of Chem-CO species (terrace-top, terrace-bridge, step-top), similar in nature and concentration to those that saturate the c-Pt(111) crystal at 300 K in Ultra-High-Vacuum., We acknowledge financial support from the Spanish Ministry of Economy (Grant MAT-2017-88374-P) and Basque Government (Grant IT621-13)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

In situ oxidation of CO on a curved Pt(111) surface in near- ambient pressure conditions

  • García-Pérez, Fernando
  • Schiller, Frederik
  • Ilyn, Max
  • Pérez-Dieste, Virginia
  • Escudero, Carlos
  • Hagman, Benjamin
  • Blomberg, Sara
  • Gustafson, Johan
  • Lundgren, Edvin
  • Ortega, J. Enrique
Resumen del trabajo presentado a la conferencia Tailored surfaces in operando conditions (Tailor): A Marcus Wallenberg symposium, celebrada en Ystad (suecia) del 11 al 14 de junio de 2018., The study of heterogeneous catalysis using metal single crystal has been a wide research field since long. Nevertheless, neither the real mechanism nor the role of atomic terraces/steps has been clearly identified, which makes the development of efficient (nanostructured) catalysts harder. Crystal surfaces undergo structural/chemical changes during catalytic reactions, so in situ studies are required for a real understanding of the process. For this reason we have carried out near-ambient pressure X-ray photoemission (NAP-XPS) experiments of the CO oxidation by O2 on a curved Pt crystal around the (111) face. By scanning the small X-ray beam, XPS spectra were collected all over the surface, observing a variation of the active species across the different crystallographic planes. The figure below shows the C 1s XPS spectra taken when increasing the temperature during the ignition process at the (111) face (left side) and at a fixed temperature (T=525K) scanning over the curved crystal (rigth side). The temperature scan at the (111) plane (left side panel) shows that, below the onset of the catalytic reaction, the surface is covered with two carbon species, namely chemisorbed CO (Chem-CO) and graphitic carbon ("C"). When the ignition starts, the "C" species is eliminated first, and then the Chem-CO is displaced by chemisorbed oxygen. This process is accompanied by a rightward shift of the gas phase components. The rigth panel demonstrates that the relative intensity of each "C" and Chem-CO varies across the curved surface, indicating a progressively increasing activity from the low active edge on top (A stepped surfaces), to the (111) center, and to the highly active B-stepped edge., We acknowledge financial support from the Spanish Ministry of Economy (Grant MAT-2017-88374-P) and Basque Government (Grant IT621-13)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Atomically precise step grids for the engineering of helical states

  • Ortega, J. Enrique
  • Vasseur, Guillaume
  • Piquero-Zulaica, Ignacio
  • Schiller, Frederik
  • Raoult, Julien
  • Valbuena, Miguel A.
  • Schirone, S.
  • Matencio, Sonia
  • Mugarza, Aitor
  • Lobo-Checa, Jorge
Trabajo presentado al Symposium on Surface Science (3S), celebrado en St. Christoph am Arlberg (Austria) del 1 al 7 de marzo de 2020., Conventional spin-degenerated surface electrons have been effectively manipulated by using organic and inorganic self-assembled nano-arrays as resonators. Step superlattices naturally assembled in vicinal surfaces are a particularly interesting case since they represent simple one-dimensional (1D) models for fundamental studies, and can imprint strong anisotropies in surface electron transport in real devices. Here we present the first realization of periodic resonator arrays on the BiAg2 atom-thick surface alloy with unprecedented atomic precision, and demonstrate their potential ability for tuning helical Rashba states. We employ a Ag cylindrical crystal curved around the Ag(645) vicinal surface [c-Ag(645) sample] to be able of selecting local vicinal planes with kinked steps. After sublimation and post-annealing of a 0.3 ML Bi layer, we achieve a homogenous BiAg2 surface alloy, featuring sharp arrays of extraordinarily straight Bi-terminated, monoatomic steps, with variable (tunable) density across the curved surface. Scanning the ultraviolet light beam on such Bi/c-Ag(645) interface in angle-resolved photoemission (ARPES) experiments allowed us to observe the characteristic signatures of strong and coherent step-lattice scattering in the spin-textured bands of the BiAg2 alloy, that is, step-umklapps, and a large, step-density-dependent Rashba band shift. First-principle DFT calculations reveal a complex terrace/step spin/orbital composition, which in turn explains the large spectral broadening and strong photon-energy dependence observed in ARPES. DFT also predicts the split-off of 1D electron-like step and terrace bands dispersing parallel to surface steps., This research was supported by the CERCA Programme/Generalitat de Catalunya, and funded by the Spanish Ministry of Science, Innovation and Universities (Grants MAT2016-78293-C6 (2-R, 4-R and 6-R), MAT-2017-88374-P and Severo Ochoa No. SEV-2017-0706), the Basque Government (Grant IT-1255-19), the regional Government of Aragón (RASMIA project) and the European Regional Development Fund (ERDF) under the program Interreg V-A España-Francia-Andorra (Contract No. EFA 194/16 TNSI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Magnetic and electronic properties of hybrid metal–organic interfaces on rare earthgold surface compounds

  • Fernández, Laura
  • Castrillo-Bodero, Rodrigo
  • Blanco-Rey, María
  • Ali, Khadiza
  • Ortega, J. Enrique
  • Schiller, Frederik
Resumen del trabajo presentado al 13th Joint European Magnetic Symposia (JEMS), celebrado en Madrid del 27 de agosto al 1 de septiembre de 2023., Fundamental knowledge of magnetic and electronic interaction phenomena that takes place at the hybrid metalorganic interface is decisive to explore the possibility to create highly spin-polarized spinterfaces to enhance the performance of organic spintronic devices. To this end, tailoring magnetic properties on structurally robust substrates is crucial. Rare-earth/noble metal monolayer alloys, grown on gold surfaces, possess a big potential as nanostructured magnetic templates with structural stability. Different elements of the lanthanide series have been observed to form surface-confined alloys in Au(111), characterized by a high crystal quality and nanoscale periodic corrugation. We have prepared hybrid metal–organic interfaces by the adsorption of copper phthalocyanine CuPc on REAu2 monolayers (RE = Gd, Ho and Yb) and studied their growth, electrostatics, electronic structure and magnetic properties. We observe a significant effect of the RE valence of the substrate on the carrier injection barrier of the hybrid metal–organic interface. CuPc adsorbed on trivalent RE-based surfaces (HoAu2 and GdAu2) exhibits molecular level energies that may allow injection carriers significantly closer to an ambipolar injection behavior than in the divalent case (YbAu2). Moreover, the magnetic exchange coupling between the ferromagnetic surfaces (HoAu2 and GdAu2) and the CuPc layer is explored, studing the effect of the RE atom on the magnetic behavior of the hybrid metal-organic interface., The authors acknowlege Spanish Ministerio de Ciencia e Innovación (grants No. MAT-2017-88374-P, PID2020-116093RB-C44, PID2019-103910GB-I00 and PTA2019-018134-I and the Basque Government (grants No. IT-1591-22, IT-152722), the EU Horizon 2020 through the Marie Skłodowska-Curie Grant MagicFACE No. 797109., No