Pasar al contenido principal

RED ESPAÑOLA EN ALMACENAMIENTO DE ENERGIA TERMICA

RED2018-102431-T

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Redes Investigación /Redes Excelencia
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE LLEIDA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 77
Encontrada(s) 1 página(s)

Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Development of a new concrete for high-temperature thermal energy storage

  • Cabeza, Luisa F.
  • Boquera, Laura
  • Castro Chicot, José Ramón
  • Pisello, Anna Laura
Vision: Being a reference group of engineering at an international level, always linked to the University of Lleida. Mission: To propose solutions to the industry in the fields of sustainability, energy engineering and control, through research, technology transfer and training. Objectives: To improve existing knowledge through research and innovation ; To help increase the competitiveness of companies through collaborations, whether for the design of new products or as a technology consultancy., This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE), Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T - MCIU/AEI), Agencia Estatal de Investigación (AEI) - Ministerio de Ciencia, Innovación y Universidades (PCI2020-120695- 2/AEI/10.13039/501100011033), and Secretaria de Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya and is co-financed by the European Union through the European Regional Development Fund (FEDER) (2019PROD00101). Funding has also been received from European Union’s Horizon 2020 research and innovation programs under the project CSPplus (Cofund ERA-NET Action, N° 838311). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537) and the ICREA Catalan institution for awarding the ICREA Academy, for the second consecutive time. GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Experimental study of a novel three-fluids heat exchanger embedded with phase change materials for cooling applications

  • Mselle, Boniface Dominick
  • Zsembinszki, Gabriel
  • Vérez, David
  • Cabeza, Luisa F.
This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 768824 (HYBUILD). This work is partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE) and the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme. Boniface Dominick Mselle would like to thank Programa Santander Predoc UdL for his research fellowship.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Estudio experimental sobre el impacto del factor de empaquetamiento en un almacenamiento de energía térmica a escala de prototipo con materiales de cambio de fase en forma tubular

  • Vérez, David
  • Borri, Emiliano
  • Ure, Zafer
  • Zsembinszki, Gabriel
  • Cabeza, Luisa F.
El almacenamiento de energía térmica (TES) es esencial para mejorar la penetración de las energías renovables. Entre todas las tecnologías de almacenamiento, el almacenamiento de energía térmica por calor latente (LTES) con el uso de materiales de cambio de fase ha ganado atención debido a su alta densidad energética. La macro-encapsulación es la técnica más común para incluir PCM en un depósito de almacenamiento. Sin embargo, el diseño del almacenamiento y la distribución del PCM macro-encapsulado tienen un gran impacto sobre la transferencia de calor y la capacidad de almacenamiento de energía. En este estudio se probó experimentalmente un depósito de PCM a escala piloto con una capacidad de almacenamiento de 13 kWh utilizando PCM macro-encapsulado con dos factores de empaquetamiento diferentes., Thermal energy storage (TES) is essential to improve the penetration of renewable energies. Among all storage technologies, latent heat thermal energy storage (LTES) using phase change materials has gained attention due to its high energy density. Macro-encapsulation is the most common technique to include PCM in a storage tank. However, the design of the storage and the distribution of the macro-encapsulated PCM have a great impact on heat transfer and energy storage capacity. In this study, a pilot-scale PCM tank with a storage capacity of 13 kWh was experimentally tested using macro-encapsulated PCM with two different packaging factors., Este estudio está parcialmente financiado por la Unión Europea SWS-HEATING (GA 764025), por el Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE) y por el Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). Los autores de la Universidad de Lleida agradecen al Gobierno de Cataluña por la acreditación de calidad concedida al grupo de investigación GREiA (2017 SGR 1537). GREiA es un agente certificado TECNIO en la categoría de desarrolladores tecnológicos del Gobierno de Cataluña. Este trabajo está parcialmente apoyado con ICREA dentro del programa ICREA Academia.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Life cycle assessment (LCA) of concentrating solar power (CSP) plant in tower configuration with and without thermal energy storage (TES)

  • Gasa, Gemma
  • López-Román, Antón
  • Cabeza, Luisa F.
  • Prieto, Cristina
INTRODUCTION: The main objective of the present study is to compare the 30-year life cycle assessment of two concentrating solar power systems with tower configuration, one without thermal energy storage and the other with thermal energy storage, in order to assess their potential impact on the environment. To achieve this aim, common reference characteristics have been defined in order to allow the optimal comparison. The reference power considered for both technologies has been 110 MW and the "power cycle" (turbine, alternator and generator) and the "cooling system" are the same in both configuration. In general terms, the significant differences between both configurations are focused on the area of the solar field, and with it the number of heliostats, and on the storage of thermal energy by inorganic salts. Although it is true that concentrating solar power plant (CSP) in tower without thermal energy storage is not a current commercial configuration, it is very interesting to be able to compare the environmental impacts of both configurations when thermal energy storage is added to the solar plant. In addition, the study ends by assessing whether the environmental impact that is generated by adding thermal energy storage compensates with the improvement of its manageability, its dispatchability and its contribution to decarbonisation. METHOD: Life cycle assessment (LCA) is a methodology that allows evaluating the environmental loads associated with a product, process or activity, identifying and quantifying the energy, the materials consumed and the waste released into the environment throughout the entire life cycle. The LCA included in this study is carried according to ISO 14040 and 14044. Thus, this LCA is based on the impact assessment method ReCiPe in impact points and GWP in kgCO2eq and the database used is Ecoivent 3.6, which has positioned itself as a world leader in creating more transparent life cycle impact databases. Moreover, this work encompasses three distinct phases of evaluation: manufacturing, operational, and end of life. RESULTS AND CONCLUSIONS: At the time of submitting this abstract, the study is on its way., This work was supported under the umbrella of CSP-ERA-Net 1st Cofund Joint Call by AEI - Spanish Ministry of Science, Innovation and Universities, TÜBITAK - Scientific and Technological Research Council of Turkey, and CSO - Israeli Ministry of Energy. CSP-ERA-Net is supported by the European Commission within the EU Framework Programme for Research and Innovation HORIZON 2020 (Cofund ERA-NET Action, N° 838311) and it was partially funded by Agencia Estatal de Investigación (AEI) - Ministerio de Ciencia, Innovación y Universidades (PCI2020-120695- 2/AEI/10.13039/501100011033), Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE), and Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018- 102431-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Control inteligente en sistemas de almacenamiento térmico estacional (vídeo)

  • Crespo, Alicia
¿Qué es un sistema de almacenamiento de energía térmica estacional? Es un sistema de almacenamiento que almacena calor (normalmente del sol) durante el verano y lo libera en invierno cuando existe una necesidad de calefacción y no hay o hay muy poca irradiación solar. Este sistema es perfecto para climas noreuropeos. ¿Por qué usar un sistema de almacenamiento por sorción? Porque funciona muy bien de forma estacional ya que presenta bajas pérdidas térmicas a largo plazo. Además tiene elevada densidad energética, es decir, puede almacenar mucho calor por volumen de material., Alicia Crespo agradece la financiación económica de la beca FI-SDUR de la AGAUR de la Generalitat de Catalunya y la Secretaria d’Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya. Este trabajo está parcialmente financiado por el Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31 - MCIN/AEI/10.13039/501100011033/FEDER, UE) y el Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). Los autores agradecen al Gobierno de Cataluña la acreditación de calidad concedida al grupo de investigación GREiA (2017 SGR 1537). GREiA es un agente certificado TECNIO en la categoría de desarrolladores tecnológicos del Gobierno de Cataluña. Este trabajo está parcialmente apoyado por ICREA dentro del programa ICREA Academia. Este Proyecto recibe financiación de los programas de investigación e innovación Horizonte 2020 de la Unión Europea en el marco del proyecto en el proyecto SWS-Heating (No 764025). El proyecto NitRecerCat (GA 101061189) está cofinanciado por el programa de investigación e innovación Horizonte Europa de la Unión Europea.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Phase change materials: is it still the starring technology of thermal energy storage? Current applications, perspectives and research gaps

  • Cabeza, Luisa F.
  • Borri, Emiliano
This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE), the Ministerio de Economia y Competitividad (TIN2015-71799-C2-2-P (MINECO/FEDER)), the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T), the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (PCI2020-120695-2 through PCI call), and the Secretaria de Universitats i Recerca of the Departament d'Empresa i Coneixement of the Generalitat de Catalunya (2019 PROD 00101 (AGAUR/FEDER)). Funding has also been received from European Union’s Horizon 2020 research and innovation programs under projects Innova MicroSOLAR (723596), HYBUILD (768824), SWS-HEATING (764025), SolBio-Rev (814945) and EuNightCat20 (954506). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

The role of buildings in climate change mitigation

  • Cabeza, Luisa F.
This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31-MCIU/AEI/FEDER,UE), Ministerio de Ciencia, Innovación y Universidades-Agencia Estatal de Investigación(AEI)(RED2018-102431-T-MCIU/AEI), Agencia Estatal de Investigación(AEI)-Ministerio de Ciencia, Innovación y Universidades (PCI2020-120695-2/AEI/10.13039/501100011033), and Secretaria de Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya and is co-financed by the European Union through the European Regional Development Fund(FEDER)(2019PROD00101). Funding has also be enreceived from European Union’s Horizon2020 research and innovation programs under projects Innova MicroSOLAR (723596), HYBUILD (768824), SWS-HEATING (764025), SolBio-Rev (814945), CSPplus (Cofund ERA-NET Action, N°838311), and CO-COOL (101007976). The authors would like to thank the Catalan Government for the quality accreditation given to the irresearch group (2017SGR1537) and the ICREA Catalan institution for awarding the ICREA Academy, for the second consecutive time. GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Desarrollo y optimización de nuevos PCM en base a sales inorgánicas, para su aplicación en sistemas de almacenamiento de energía térmica a altas temperaturas (Nit Europea de la Recerca 2022)

  • Martínez, Franklin R.
Las plantas de concentración solar de potencia CSP, son instalaciones industriales donde se aprovecha la radiación solar para producir energía eléctrica. Los rayos solares son reflejados desde una superficie extensa y concentrados en un solo punto (superficie reducida) para calentar el fluido calo portador (HTF) a una temperatura de 565ºC, este fluido caliente ingresa al intercambiador de calor donde cede al agua el calor acumulado, produciendo vapor, el cual ingresa a la turbina donde se genera energía eléctrica., F. Rodrigo Martínez Alcocer agradece a la Beca Doctorado Nacional para estudiantes extranjeros ANID 2021 Folio 21211932 por el apoyo financiero en la investigación. Los autores agradecen al Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31 - MCIN/AEI/10.13039/501100011033/FEDER, UE) y el Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). Los autores agradecen al gobierno de Cataluña la acreditación de calidad al grupo de investigación GREiA (2017 SGR 1537). GREiA tiene la acreditación como agente TECNIO en la categoría de desarrolladores tecnológicos del gobierno de Cataluña. También el presente trabajo tiene un apoyo de ICREA en el programa ICREA Academia. Este trabajo está cofinanciado por el programa de investigación e innovación Horizon Europe de la Unión Europea bajo el proyecto NitRecerCat (GA 101061189).
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Soluciones de almacenamiento de energía térmica para edificios

  • Vérez, David
Este trabajo está parcialmente financiado por el Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (AEI) (PID2021- 123511OB-C31 - MCIN/AEI/10.13039/501100011033/FEDER, UE) y el Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). Los autores agradecen al Gobierno de Cataluña la acreditación de calidad concedida al grupo de investigación GREiA (2017 SGR 1537). GREiA es un agente certificado TECNIO en la categoría de desarrolladores tecnológicos del Gobierno de Cataluña. Este trabajo está parcialmente apoyado por ICREA dentro del programa ICREA Academia. El proyecto NitRecerCat (GA 101061189) está cofinanciado por el programa de investigación e innovación Horizonte Europa de la Unión Europea.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Life Cycle Assessment (LCA) of Several Concentrating Solar Plants (CSP) in Tower Configuration with Different Storage Capacity in Molten Salts

  • Gasa, Gemma
  • López-Román, Antón
  • Prieto, Cristina
  • Cabeza, Luisa F.
The objective of this study is to analyse the impact of the thermal energy storage system (TES) in the life cycle assessment (LCA) of a concentrating solar power plant (CSP) with central receiver technology. The study uses a base case of a plant with 110 MWel and 17.5 hours of direct storage with molten salts. First, this plant was compared with a plant of equal power but without storage. Subsequently, the LCAs of four plants with different thermal energy storage capacities, 3, 6, 9 and 17.5 equivalent hours, were compared. The results show that TES is key for solar thermal plants, not only to guarantee dispatch capacity, but also to reduce their environmental impact. Comparing different thermal storage capacities, the most environmentally efficient plant of those analysed is the one with a storage capacity of 9 h., This work is part of PCI2020-120695-2 projects funded by Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (MCIN/AEI/10.13039/501100011033) and by the European Union “NextGenerationEU”/PRTR”. This work was partially funded by the Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31 - MCIN/AEI/10.13039/501100011033/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T- MCIU/AEI). The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREiA (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Control inteligente en sistemas de almacenamiento térmico estacional

  • Crespo, Alicia
¿Qué es un sistema de almacenamiento de energía térmica estacional? Es un sistema de almacenamiento que almacena calor (normalmente del sol) durante el verano y lo libera en invierno cuando existe una necesidad de calefacción y no hay o hay muy poca irradiación solar. Este sistema es perfecto para climas noreuropeos. ¿Por qué usar un sistema de almacenamiento por sorción? Porque funciona muy bien de forma estacional ya que presenta bajas pérdidas térmicas a largo plazo. Además tiene elevada densidad energética, es decir, puede almacenar mucho calor por volumen de material., Alicia Crespo agradece la financiación económica de la beca FI-SDUR de la AGAUR de la Generalitat de Catalunya y la Secretaria d’Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya. Este trabajo está parcialmente financiado por el Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31 - MCIN/AEI/10.13039/501100011033/FEDER, UE) y el Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). Los autores agradecen al Gobierno de Cataluña la acreditación de calidad concedida al grupo de investigación GREiA (2017 SGR 1537). GREiA es un agente certificado TECNIO en la categoría de desarrolladores tecnológicos del Gobierno de Cataluña. Este trabajo está parcialmente apoyado por ICREA dentro del programa ICREA Academia. Este Proyecto recibe financiación de los programas de investigación e innovación Horizonte 2020 de la Unión Europea en el marco del proyecto en el proyecto SWS-Heating (No 764025). El proyecto NitRecerCat (GA 101061189) está cofinanciado por el programa de investigación e innovación Horizonte Europa de la Unión Europea.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

State of art of PCM for air conditioning and refrigeration

  • Cabeza, Luisa F.
Vision: Being a reference group of engineering at an international level, always linked to the University of Lleida. Mission: Propose solutions to the industry in the fields of sustainability, energy engineering and control, through research, technology transfer and training. Objectives: Improve existing knowledge through research and innovation ; Help increase the competitiveness of companies through collaborations, whether for the design of new products or as a technology consultancy, This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE), the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T), and the Secretaria de Universitats i Recerca of the Departament d'Empresa i Coneixement of the Generalitat de Catalunya (2019 PROD 00101 (AGAUR/FEDER)). Funding has also been received from European Union’s Horizon 2020 research and innovation programs under projects, HYBUILD (768824), SWS-HEATING (764025). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Social Acceptance of TES

  • Cabeza, Luisa F.
This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE), Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T - MCIU/AEI), Agencia Estatal de Investigación (AEI) - Ministerio de Ciencia, Innovación y Universidades (PCI2020-120695- 2/AEI/10.13039/501100011033), and Secretaria de Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya and is co-financed by the European Union through the European Regional Development Fund (FEDER) (2019PROD00101). Funding has also been received from European Union’s Horizon 2020 research and innovation programs under projects Innova MicroSOLAR (723596), HYBUILD (768824), SWS-HEATING (764025), SolBio-Rev (814945), CSPplus (Cofund ERA-NET Action, N° 838311), and CO-COOL (101007976). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537) and the ICREA Catalan institution for awarding the ICREA Academy, for the second consecutive time. GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Desarrollo de una herramienta computacional de simulación de sistemas de almacenamiento térmico (TES) para plantas de concentración solar (Nit Europea de la Recerca 2023)

  • Tagle-Salazar, Pablo D.
¿Qué es un Sistema de Almacenamiento de Energía Térmica? Sistema que “guarda” energía en forma de calor en períodos de alta producción (día) para usarlo como fuente en períodos de alta demanda (noche). Esto permite obtener una generación de potencia más estable, disminuyendo los efectos de la intermitencia solar., Este trabajo está parcialmente financiado por el Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31-MCIN/AEI/10.13039/501100011033/FEDER, UE) y el Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2022-134219-T). Los autores agradecen al Gobierno de Cataluña la acreditación de calidad concedida al grupo de investigación GREiA (2021 SGR 01615). GREiA es un agente certificado TECNIO en la categoría de desarrolladores tecnológicos del Gobierno de Cataluña. Este trabajo está parcialmente apoyado por ICREA dentro del programa ICREA Academia. El proyecto NitRecerCat (GA 101061189) está cofinanciado por el programa de investigación e innovación Horizonte Europa de la Unión Europea.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Soluciones de almacenamiento de energía térmica para edificios (vídeo)

  • Vérez, David
Este trabajo está parcialmente financiado por el Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (AEI) (PID2021- 123511OB-C31 - MCIN/AEI/10.13039/501100011033/FEDER, UE) y el Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). Los autores agradecen al Gobierno de Cataluña la acreditación de calidad concedida al grupo de investigación GREiA (2017 SGR 1537). GREiA es un agente certificado TECNIO en la categoría de desarrolladores tecnológicos del Gobierno de Cataluña. Este trabajo está parcialmente apoyado por ICREA dentro del programa ICREA Academia. El proyecto NitRecerCat (GA 101061189) está cofinanciado por el programa de investigación e innovación Horizonte Europa de la Unión Europea.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Desarrollo y prueba de un nuevo módulo de hormigón como material de almacenamiento de energía térmica para plantas de concentración solar de potencia (vídeo)

  • Cofré-Toledo, Jonathan
• La tecnología de Concentración Solar de Potencia (CSP) puedo almacenar calor y transformarlo en electricidad durante el día y la noche. • La radiación solar incide sobre espejos (helióstatos) que reflejan y concentran la luz en un receptor solar ubicado en la parte superior de una torre. • En el interior del receptor circula un fluido que absorbe el calor del sol alcanzando temperaturas de más de 550 ºC. • El fluido puede ser una sal fundida o un aceite sintético. El calor se puede almacenar en un bloque de hormigón y puede ser utilizado para generar vapor de agua a alta presión, el cual hará girar una turbina. • La turbina genera electricidad que se transmite a través de cables y postes hacia las ciudades e industrias., Este trabajo está parcialmente financiado por el Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (AEI) (PID2021- 123511OB-C31 - MCIN/AEI/10.13039/501100011033/FEDER, UE), la Agencia Estatal de Investigación (AEI) - Ministerio de Ciencia e Innovación (PCI2020-120695-2/AEI/10.13039/501100011033) y el Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). Los autores agradecen al Gobierno de Cataluña la acreditación de calidad concedida al grupo de investigación GREiA (2017 SGR 1537). GREiA es un agente certificado TECNIO en la categoría de desarrolladores tecnológicos del Gobierno de Cataluña. Este trabajo está parcialmente apoyado por ICREA dentro del programa ICREA Academia. El proyecto NitRecerCat (GA 101061189) está cofinanciado por el programa de investigación e innovación Horizonte Europa de la Unión Europea.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Methods for the determination of the state-of-charge of a thermal energy storage device

  • Zsembinszki, Gabriel
  • Vérez, David
  • Mselle, Boniface Dominick
  • Borri, Emiliano
  • Luisa F. Cabeza
This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 768824 (HYBUILD). This work is partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE) and the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018- 102431-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme. Boniface Dominick Mselle would like to thank Programa Santander Predoc UdL for his research fellowship.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Recent trends and future perspectives on the use of phase change materials for thermal energy storage (CIES 2022)

  • Cabeza, Luisa F.
  • Borri, Emiliano
Vision: Being a reference group of engineering at an international level, always linked to the University of Lleida. Mission: To propose solutions to the industry in the fields of sustainability, energy engineering and control, through research, technology transfer and training. Objectives: To improve existing knowledge through research and innovation ; To help increase the competitiveness of companies through collaborations, whether for the design of new products or as a technology consultancy., This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31-MCIU/AEI/FEDER,UE), Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T-MCIU/AEI), Agencia Estatal de Investigación (AEI) - Ministerio de Ciencia, Innovación y Universidades (PCI2020-120695-2/AEI/10.13039/501100011033). Funding has also been received from European Union’s Horizon 2020 research and innovation program sunder projects SWS-HEATING (764025), CO-COOL (101007976), and CSPplus (CofundERA-NETAction, N°838311) The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017SGR1537) and the ICREA Catalan institution for awarding the ICREA Academy, for these condconsecutive time. GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Experimental analysis of a small size vacuum insulated water tank

  • Borri, Emiliano
  • Vérez, David
  • Zsembinszki, Gabriel
  • Dawoud, Belal
  • Cabeza, Luisa F.
This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 764025 (SWS-HEATING). This work is partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE) and the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Recent trends and future perspectives on the use of phase change materials for thermal energy storage (EIRES 2022)

  • Cabeza, Luisa F.
  • Borri, Emiliano
Vision: Being a reference group of engineering at an international level, always linked to the University of Lleida. Mission: To propose solutions to the industry in the fields of sustainability, energy engineering and control, through research, technology transfer and training. Objectives: To improve existing knowledge through research and innovation ; To help increase the competitiveness of companies through collaborations, whether for the design of new products or as a technology consultancy, This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31-MCIU/AEI/FEDER,UE), Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T-MCIU/AEI), Agencia Estatal de Investigación (AEI) - Ministerio de Ciencia, Innovación y Universidades (PCI2020-120695-2/AEI/10.13039/501100011033). Funding has also been received from European Union’s Horizon 2020 research and innovation program sunder projects SWS-HEATING (764025), CO-COOL (101007976), and CSPplus (CofundERA-NETAction, N°838311) The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017SGR1537) and the ICREA Catalan institution for awarding the ICREA Academy, for these condconsecutive time. GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Use of reinforcement learning to optimize the control of solar thermal collectors coupled to seasonal thermal energy storage

  • Crespo, Alicia
  • Gracia Cuesta, Alvaro de
  • Vérez, David
  • Cabeza, Luisa F.
  • Fernàndez Camon, César
This work is partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE) and the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme. This project has received funding from the European Union´s Horizon 2020 research and innovation programme under the No 764025 (SWS-Heating). Alicia Crespo would also like to acknowledge the financial support of the FI-SDUR grant from the AGAUR of the Generalitat de Catalunya and Secretaria d’Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Definition of key performance indicators (KPIs) to evaluate innovative storage systems in concentrating solar power (CSP) plants

  • Cabeza, Luisa F.
  • Borri, Emiliano
  • Gasa, Gemma
  • Zsembinszki, Gabriel
  • López-Román, Antón
  • Prieto, Cristina
The increasing penetration of renewable energies into the energy system is leading to significant development and deployment of generation plants based on the use of solar energy. On large scale, concentrating solar power (CSP) plants is the starring technology. In those systems, thermal energy storage (TES) is an essential component that allows both providing dispatchability and increasing power production thus improving the plant efficiency and reducing both its size and cost. Current storage technologies are mainly based on solar salts (molten salts) and saturated steam, their main drawback being their operating temperatures. Therefore, the current challenge is to develop innovative solutions that allow CSP plants to work at higher temperatures to increase their efficiency. In order to allow the comparison of new TES concepts, the definition of proper key performance indicators (KPIs) helps to better identify the best storage solutions. This paper reports a preliminary selection of KPIs suitable for TES systems and their validation against the commercially available two-tanks molten salts storage concept for a 100 MW net capacity CSP tower plant to allow the comparison with innovative solutions. The results of this study can be used as a basis for comparison of TES technologies with the available ones, as well as to set the target for the research and development of future storage solutions., CSPplus is supported under the umbrella of CSP-ERA-Net 1st Cofund Joint Call by AEI - Spanish Ministry of Science, Innovation and Universities, TÜBITAK - Scientific and Technological Research Council of Turkey, and CSO - Israeli Ministry of Energy. CSP-ERA-Net is supported by the European Commission within the EU Framework Programme for Research and Innovation HORIZON 2020 (Cofund ERA-NET Action, N° 838311) and this work was partially funded by Agencia Estatal de Investigación (AEI) - Ministerio de Ciencia, Innovación y Universidades (PCI2020-120695-2/AEI/10.13039/501100011033), and Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades-Agencia Estatal de Investigación (AEI) (RED2018-102431-T- AEI). This work is partially supported by ICREA under the ICREA Academia programme. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Avaluació de la configuració de diferents plantes de concentració solar (CSP) mitjançant eines d’avaluació del cicle de vida (ACV) (vídeo)

  • Gasa, Gemma
Totes les tecnologies de concentració solar (CSP) utilitzen una configuració per concentrar l’energia de la llum solar en un receptor i convertir-la en calor. L'energia tèrmica es pot utilitzar per crear vapor que condueixi una turbina per produir energia elèctrica o es pot utilitzar com a procés industrial de calor., Aquest treball està parcialment finançat pel el Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31 - MCIN/AEI/10.13039/501100011033/FEDER, UE) i pel Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). Els autors agraeixen al Govern de Catalunya l‟acreditació de qualitat concedida al grup de recerca GREiA (2017 SGR 1537). GREiA és un agent certificat TECNIO dins la categoria de desenvolupadors tecnològics del Govern de Catalunya. Aquest treball està parcialment recolzat per ICREA dins del programa ICREA Acadèmia. El projecte NitRecerCat (GA 101061189) està cofinançat pel programa de recerca i innovació Horitzó Europa de la Unió Europea.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Recent trends and future perspectives on the use of phase change materials for thermal energy storage (CNIT 2022)

  • Cabeza, Luisa F.
  • Borri, Emiliano
Vision: Being a reference group of engineering at an international level, always linked to the University of Lleida. Mission: To propose solutions to the industry in the fields of sustainability, energy engineering and control, through research, technology transfer and training. Objectives: To improve existing knowledge through research and innovation ; To help increase the competitiveness of companies through collaborations, whether for the design of new products or as a technology consultancy., This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31-MCIU/AEI/FEDER,UE), Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T-MCIU/AEI), Agencia Estatal de Investigación (AEI) - Ministerio de Ciencia, Innovación y Universidades (PCI2020-120695-2/AEI/10.13039/501100011033). Funding has also been received from European Union’s Horizon 2020 research and innovation program sunder projects SWS-HEATING (764025), CO-COOL (101007976), and CSPplus (CofundERA-NETAction, N°838311) The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017SGR1537) and the ICREA Catalan institution for awarding the ICREA Academy, for these condconsecutive time. GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Energia renovable, nova economia i abandonament o reforçament dels petits municipis

  • Cabeza, Luisa F.
  • Zsembinszki, Gabriel
  • Gasa, Gemma
Aquest treball està parcialment finançat pel Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 (FEDER)), Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T), Agencia Estatal de Investigación (AEI) - Ministerio de Ciencia, Innovación y Universidades (PCI2020-120695- 2/AEI/10.13039/501100011033), y Secretaria de Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya i és co-finançat per la Unió Europea a través del Fons Europeu de Desenvolupament Regional (FEDER) (2019PROD00101). També s’ha rebut finançament de l’Horitzo 2020 de l’Unió Europea dins de programes de recerca i innovació amb els projectes Innova MicroSOLAR (723596), HYBUILD (768824), SWSHEATING (764025), SolBio-Rev (814945) i CSPplus (Cofund ERA-NET Action, N° 838311). Agraïr també al Govern Català per l’acreditació de qualitat donada al grup de recerca (2017 SGR 1537) i a la institució catalana ICREA per la concessió de l’ICREA Acadèmia, per segona vegada consecutiva. GREiA és agent certificat TECNIO en la categoria de desenvolupadors de tecnologia de la Generalitat de Catalunya.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Desarrollo de una herramienta computacional de simulación de sistemas de almacenamiento térmico (TES) para plantas de concentración solar (Nit Europea de la Recerca 2022)

  • Tagle-Salazar, Pablo D.
¿Qué es un Sistema de almacenamiento térmico? Un sistema que almacena energía en forma de calor para usarlo como fuente cuando su recurso primario no está disponible. Enfocado a concentración solar, la fuente es la radiación solar. Ventajas/Desventajas Principal desventaja: La planta solar puede generar electricidad en las noches o en días nublados. Principal desventaja: Altos costos (materiales, instalación, O&M)., Este trabajo está parcialmente financiado por el Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (PID2021- 123511OB-C31 - MCIN/AEI/10.13039/501100011033/FEDER, EU), la Agencia Estatal de Investigación (AEI) - Ministerio de Ciencia e Innovación (PCI2020-120695-2/AEI/10.13039/501100011033) y el Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). Los autores agradecen al Gobierno de Cataluña la acreditación de calidad concedida al grupo de investigación GREiA (2017 SGR 1537). GREiA es un agente certificado TECNIO en la categoría de desarrolladores tecnológicos del Gobierno de Cataluña. Este trabajo está parcialmente apoyado por ICREA dentro del programa ICREA Academia. El proyecto NitRecerCat (GA 101061189) está cofinanciado por el programa de investigación e innovación Horizonte Europa de la Unión Europea
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Desarrollo y optimización de nuevos PCM en base a sales inorgánicas, para su aplicación en sistemas de almacenamiento de energía térmica a altas temperaturas (vídeo) (Nit Europea de la Recerca 2022)

  • Martínez, Franklin R.
Las plantas de concentración solar de potencia CSP, son instalaciones industriales donde se aprovecha la radiación solar para producir energía eléctrica. Los rayos solares son reflejados desde una superficie extensa y concentrados en un solo punto (superficie reducida) para calentar el fluido calo portador (HTF) a una temperatura de 565ºC, este fluido caliente ingresa al intercambiador de calor donde cede al agua el calor acumulado, produciendo vapor, el cual ingresa a la turbina donde se genera energía eléctrica., F. Rodrigo Martínez Alcocer agradece a la Beca Doctorado Nacional para estudiantes extranjeros ANID 2021 Folio 21211932 por el apoyo financiero en la investigación. Los autores agradecen al Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31 - MCIN/AEI/10.13039/501100011033/FEDER, UE) y el Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). Los autores agradecen al gobierno de Cataluña la acreditación de calidad al grupo de investigación GREiA (2017 SGR 1537). GREiA tiene la acreditación como agente TECNIO en la categoría de desarrolladores tecnológicos del gobierno de Cataluña. También el presente trabajo tiene un apoyo de ICREA en el programa ICREA Academia. Este trabajo está cofinanciado por el programa de investigación e innovación Horizon Europe de la Unión Europea bajo el proyecto NitRecerCat (GA 101061189).
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Deep learning optimal control for a solar-biomass system for residential buildings

  • Zsembinszki, Gabriel
  • Fernàndez Camon, César
  • Borri, Emiliano
  • Cabeza, Luisa F.
Nowadays, it is well known that the reduction of energy consumption in buildings is crucial to achieve a substantial reduction of gas emission to the atmosphere and decrease the fast depletion of energy sources. Indeed, buildings are responsible for almost 40% of the overall energy consumption and gas emission into the atmosphere [1], therefore, immediate actions are needed. The reduction of the energy demand through passive solutions (i.e. building envelope) has been taking into account in directives such as the Energy Performance of Buildings Directive [2]. However, the generation of energy through efficient systems and the use of renewable sources is also required to achieve deep decarbonisation of the grid. However, the main disadvantage of renewable sources is represented by their daily and seasonal intermittency. Therefore, a system that allows the combination of more of them can provide a higher flexibility and increase the total share of renewables to meet energy needs in buildings., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 814945 (SolBio-Rev). This work was partially funded by Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE), Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T - MCIU/AEI). This work is partially supported by ICREA under the ICREA Academia programme. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

The hidden use of lithium in thermal energy storage systems: a bibliometric study

  • Cabeza, Luisa F.
  • Borri, Emiliano
  • Zsembinszki, Gabriel
Vision: Being a reference group of engineering at an international level, always linked to the University of Lleida. Mission: To propose solutions to the industry in the fields of sustainability, energy engineering and control, through research, technology transfer and training. Objectives: To improve existing knowledge through research and innovation ; To help increase the competitiveness of companies through collaborations, whether for the design of new products or as a technology consultancy., This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE), the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T) Funding has also been received from European Union’s Horizon 2020 research and innovation programs under project CO-COOL (101007976). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Life cycle assessment (LCA) of an innovative solar-biomass energy system in continental climate

  • Borri, Emiliano
  • Palomba, Valeria
  • Charalampidis, Antonios
  • Frazzica, Andrea
  • Karellas, Sotirios
  • Cabeza, Luisa F.
Hybrid energy systems applied to buildings are an effective solution to increase the share of energy produced by renewable sources to satisfy both thermal end electrical energy demand. In this study, the environmental impact of an innovative energy system based on the use of solar energy and biomass for heating, cooling, DHW, and electricity production was evaluated through life-cycle assessment (LCA) and compared to a reference standard system to be used in a multi-family house building located in a continental climate., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 814945 (SolBio-Rev). This work was partially funded by Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades-Agencia Estatal de Investigación (AEI) (RED2018-102431- T- AEI). This work is partially supported by ICREA under the ICREA Academia programme. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

New Concept for High Temperature Thermal Energy Storage Using a Concrete Tank

  • Cabeza, Luisa F.
  • Vérez, David
  • Zsembinszki, Gabriel
  • Borri, Emiliano
  • Prieto, Cristina
The use of concrete is showing great potential as thermal energy storage material for concentrating solar power plants (CSP) due to its versatility, relatively low cost, and the possibility to reach a high operating temperature, above 500ºC thus increasing the plant efficiency. However, actual configurations based on concrete show different drawbacks including difficulties during the manufacturing on-site, different thermal expansion coefficients between concrete and pipes, and poor thermal conductivity of concrete. In order to address those challenges, this study proposes a new TES concrete tank concept based on three main pillars: modularity, improved concrete formulation, and direct contact concept. A preliminary assessment of the thermal performances of the new concept was analyzed through simulations showing the temperature distribution of the modules., This work is part of PCI2020-120695-2 projects funded by Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (MCIN/AEI/10.13039/501100011033) and by the European Union “NextGenerationEU”/PRTR”. This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T- MCIU/AEI). The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREiA (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Experimental comparison of small-scale and full-scale latent storage for integration in efficient heat pumps

  • Palomba, Valeria
  • Mselle, Boniface Dominick
  • Vérez, David
  • Borri, Emiliano
  • Varvagiannis, Efstratios
  • Monokrousou, Evropi
  • Nitsch, Birgo
  • Strehlow, Andreas
  • Barmparitsas, Nikolaos
  • Leontaritis, Aris
  • Bonanno, Angelo
  • Dino, Giuseppe E.
  • Zsembinszki, Gabriel
  • Karellas, Sotirios
  • Frazzica, Andrea
  • Cabeza, Luisa F.
This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 768824 (HYBUILD). This work is partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE) and the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018- 102431-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme. Boniface Dominick Mselle would like to thank Programa Santander Predoc UdL for his research fellowship.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Avaluació de la configuració de diferents plantes de concentració solar (CSP) mitjançant eines d’avaluació del cicle de vida (ACV)

  • Gasa, Gemma
Totes les tecnologies de concentració solar (CSP) utilitzen una configuració per concentrar l’energia de la llum solar en un receptor i convertir-la en calor. L'energia tèrmica es pot utilitzar per crear vapor que condueixi una turbina per produir energia elèctrica o es pot utilitzar com a procés industrial de calor., Aquest treball està parcialment finançat pel el Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31 - MCIN/AEI/10.13039/501100011033/FEDER, UE) i pel Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). Els autors agraeixen al Govern de Catalunya l‟acreditació de qualitat concedida al grup de recerca GREiA (2017 SGR 1537). GREiA és un agent certificat TECNIO dins la categoria de desenvolupadors tecnològics del Govern de Catalunya. Aquest treball està parcialment recolzat per ICREA dins del programa ICREA Acadèmia. El projecte NitRecerCat (GA 101061189) està cofinançat pel programa de recerca i innovació Horitzó Europa de la Unió Europea.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Experimental study of a LiCl/Silica gel sorption thermal energy storage prototype

  • Crespo, Alicia
  • Palomba, Valeria
  • Mikhaeil, Makram
  • Dawoud, Belal
  • Gracia Cuesta, Alvaro de
  • Cabeza, Luisa F.
High gas and electricity prices and the desire of decarbonizing the energy sector requires more utilization of renewable sources, such as solar energy. Considering residential applications in Middle and Norther Europe, high space heating demands exist along with low solar irradiation during winter. Nevertheless, a high solar irradiation intensity is available during summer. Seasonal thermal energy storage (STES) can be a solution to solve such a time mismatch [1]. Sorption thermal energy storage (TES) technology is gaining attention in the last years for its potential application as long-term (e.g., seasonal) TES due its low thermal losses during the idle period (very important in long-term storage) and its high potential energy storage density. In a sorption TES, heat is stored thanks to the breakup of physical bonds between the sorbent material and the adsorbed fluid. Thus, as long as both elements are kept separated, the thermal losses are zero. Moreover, sorption TES is very suitable for residential applications since the adsorbent materials can be charged at regeneration temperatures below 100 ºC (no need of concentrating solar thermal collectors) and can be discharged at adsorption temperatures which match with the end user temperature of space heating systems [2]. Sorption technology has been already studied in the literature for different applications (e.g., chillers, heat pumps, TES), mainly focused on material [3,4] and on small-scale adsorbent reactors [5]. Furthermore, different materials have been studied: pure solid sorbent materials, composite sorbent materials and sorbent materials that can exploit also chemical reactions. Nevertheless, despite its potential, they have some intrinsic limitations that do not allow to reach the theoretical energy density values under real operating conditions [3]. Selective water sorbents (SWS) or salt inside porous matrix composites (SPMCs), such as LiCl-silica gel, present several advantages over traditional adsorbents as long as the salt is hold inside the pores [3]. SWS have been already studied at material level by Frazzica et al. [3] for the application in seasonal TES in Central and Northern Europe TES. The investigations have been carried out under the H2020 European project “SWS-Heating”. In the present study, the very first adsorption TES prototype has been preliminary experimentally investigated at ITAE laboratories (Italy). The adsorption heat exchanger of the first prototype is filled in with 8.9 kg of an SWS material manufactured by impregnating mesoporous silica gel with 30wt.% of LiCl., This project was funded by the European Union’s Horizon 2020 Research and Innovation Pro-gramme under No. 764025 (SWS-HEATING). This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31—MCIU/AEI/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades—Agencia Estatal de Investigación (AEI) (RED2018-102431-T). This work is partially supported by ICREA under the ICREA Academia program. Alicia Crespo would also like to acknowledge the financial support of the FI-SDUR grant from the AGAUR. The authors at the University of Lleida would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Desarrollo y prueba de un nuevo módulo de hormigón como material de almacenamiento de energía térmica para plantas de concentración solar de potencia

  • Cofré-Toledo, Jonathan
• La tecnología de Concentración Solar de Potencia (CSP) puedo almacenar calor y transformarlo en electricidad durante el día y la noche. • La radiación solar incide sobre espejos (helióstatos) que reflejan y concentran la luz en un receptor solar ubicado en la parte superior de una torre. • En el interior del receptor circula un fluido que absorbe el calor del sol alcanzando temperaturas de más de 550 ºC. • El fluido puede ser una sal fundida o un aceite sintético. El calor se puede almacenar en un bloque de hormigón y puede ser utilizado para generar vapor de agua a alta presión, el cual hará girar una turbina. • La turbina genera electricidad que se transmite a través de cables y postes hacia las ciudades e industrias., Este trabajo está parcialmente financiado por el Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (AEI) (PID2021- 123511OB-C31 - MCIN/AEI/10.13039/501100011033/FEDER, UE), la Agencia Estatal de Investigación (AEI) - Ministerio de Ciencia e Innovación (PCI2020-120695-2/AEI/10.13039/501100011033) y el Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). Los autores agradecen al Gobierno de Cataluña la acreditación de calidad concedida al grupo de investigación GREiA (2017 SGR 1537). GREiA es un agente certificado TECNIO en la categoría de desarrolladores tecnológicos del Gobierno de Cataluña. Este trabajo está parcialmente apoyado por ICREA dentro del programa ICREA Academia. El proyecto NitRecerCat (GA 101061189) está cofinanciado por el programa de investigación e innovación Horizonte Europa de la Unión Europea.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Life cycle assessment of an innovative hybrid energy storage system for residential buildings

  • Llantoy, Noelia
  • Zsembinszki, Gabriel
  • Cabeza, Luisa F.
Acknowledgements ThisprojecthasreceivedfundingfromtheEuropeanUnion’sHorizon2020researchandinnovationprogrammeundergrantagreementNo768824(HYBUILD).ThisworkispartiallyfundedbytheMinisteriodeCiencia,InnovaciónyUniversidadesdeEspaña(RTI2018-093849-B-C31-MCIU/AEI/FEDER,UE)andtheMinisteriodeCiencia,InnovaciónyUniversidades-AgenciaEstataldeInvestigación(AEI)(RED2018-102431-T).TheauthorswouldliketothanktheCatalanGovernmentforthequalityaccreditationgiventotheirresearchgroup(2017SGR1537).GREiAisacertifiedagentTECNIOinthecategoryoftechnologydevelopersfromtheGovernmentofCatalonia.ThisworkispartiallysupportedbyICREAundertheICREAAcademiaprogramme.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Life cycle assessment (LCA) of an innovative compact hybrid electrical-thermal storage system for residential buildings in Mediterranean climate

  • Palomba, Valeria
  • Llantoy, Noelia
  • Frazzica, Andrea
  • Dallapiccola, Mattia
  • Trentin, Federico
  • Zsembinszki, Gabriel
  • Cabeza, Luisa F.
The buildings sector accounts for around 40% of the total energy demand worldwide and is therefore paramount to reduce its environmental impact. Accordingly, the use of renewable energy sources coupled with energy storage systems in buildings has been widely investigated in the last years and different solutions for cooling, heating and domestic hot water have been proposed, with the aim of reducing the building electrical consumption needed to keep comfort conditions. This study investigates the environmental impact of an innovative system proposed for residential buildings in the Mediterranean climate through a life cycle assessment. Results show that, due to the complexity of the system, the manufacturing and disposal stages have a high environmental impact, which is not compensated by the reduction of the impact during the operational stage., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 768824 (HYBUILD). This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849- B-C31 - MCIU/AEI/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Experimental study on the effect of flat and thin slab encapsulation design on a PCM tank

  • Vérez, David
  • Borri, Emiliano
  • Crespo, Alicia
  • Mselle, Boniface Dominick
  • Gracia Cuesta, Alvaro de
  • Zsembinszki, Gabriel
  • Cabeza, Luisa F.
This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 764025 (SWS-HEATING). This work is partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE) and the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme. Boniface Dominick Mselle would like to thank Programa Santander Predoc UdL for his research fellowship. Alicia Crespo would also like to acknowledge the financial support of the FI-SDUR grant from the AGAUR of the Generalitat de Catalunya and Secretaria d’Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Steel slag concrete: thermo-mechanical stability under high-temperature cycles

  • Boquera, Laura
  • Castro Chicot, José Ramón
  • Fernández, Ángel G.
  • Navarro Ezquerra, Antonia
  • Pisello, Anna Laura
  • Cabeza, Luisa F.
INTRODUCTION: The improvement of the output efficiency in CSP plants is a challenge of major interest. To achieve this objective, an increase of temperature in the heat transfer and the storage media is required to increase power block efficiency. Among the suitable material options, concrete was determined to have attractive properties. Concrete is a heterogeneous material, made of several components that allows to choose the best dosage to obtain the desired properties in the final blender. Worldwide availability of concrete components and their low cost, contribute to implement eco-friendly measures. The environmental impact of the materials is a substantial parameter to take into consideration when selecting concrete components. There are by-products from industries that can be revalorized by including them into concrete mixtures, replacing cement percentage or using them as aggregates. A by-product from the metallurgy industry, known as steel slag or electric arc furnace slag, was previously studied as aggregates in concrete for thermal energy storage. In this paper, the thermal stability under high-temperature cycles, of two cement types with steel slag as the only aggregate in the concrete mixture is compared. As further novelty, the thermal cycles were adapted to heating rates currently used in the operation of a CSP plant. MATERIALS AND METHODS: In the present study two concrete dosages were designed. One using ordinary Portland cement and the other with calcium aluminate cement. In both binders, steel slag was used as aggregate, considering granulometries of 0-12 mm. Physical, thermal and mechanical properties were studied before and after thermal cycles. To study the thermal stability, 10 continuous thermal cycles were carried out. The thermal cycle profile consisted on a first cycle with a low heating rate 1 ºC/min up to 290 ºC followed by an isothermal step of 4 hours. Continuously, temperature increased up to 700 ºC with the same heating rate and maintaining during 4 hours. After, the samples were cooled down to 290 ºC, at a rate below 1 ºC/min. For the next cycles the heating rate was increased to 15 ºC/min, considering the same time for the isothermal steps and the cooling part. RESULTS: The external appearance showed a geometry preservation in all samples. There were no important cracks in the surface, only micro-fissures in the samples after some thermal cycles. There is a strong connection between the aggregates and both types of cement paste, conferring a bonding in the concrete mixture. No spalling signs nor thermal expansion of aggregates was observed. The mass loss was around 4 % in both mixtures after the thermal cycles. The thermal conductivity was reduced 50 % after the 10 thermal cycles. Despite the high compressive strength obtained before any thermal treatment, the compressive strength drastically decreased 80 % after the 10 thermal cycles. CONCLUSIONS: Despite the low thermal conductivity achieved after thermal cycles, a high integrity preservation of the concrete mixtures was observed. The compatibility of steel slag highlight with both cement types conferring a hydraulic bonding to the mixture, appreciating small fissures., CSPplus is supported under the umbrella of CSP-ERA-Net 1st Cofund Joint Call by AEI - Spanish Ministry of Science, Innovation and Universities, TÜBITAK - Scientific and Technological Research Council of Turkey, and CSO - Israeli Ministry of Energy. CSP-ERA-Net is supported by the European Commission within the EU Framework Programme for Research and Innovation HORIZON 2020 (Cofund ERA-NET Action, N° 838311) and this work was partially funded by Agencia Estatal de Investigación (AEI) - Ministerio de Ciencia, Innovación y Universidades (PCI2020-120695-2/AEI/10.13039/501100011033), Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE), and Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Life cycle assessment (LCA) of an innovative compact hybrid electrical-thermal storage system for residential buildings in Mediterranean climate

  • Palomba, Valeria
  • Llantoy, Noelia
  • Frazzica, Andrea
  • Dallapiccola, Mattia
  • Trentin, Federico
  • Zsembinszki, Gabriel
  • Cabeza, Luisa F.
The buildings sector accounts for around 40% of the total energy demand worldwide and is therefore paramount to reduce its environmental impact. Accordingly, the use of renewable energy sources coupled with energy storage systems in buildings has been widely investigated in the last years and different solutions for cooling, heating and domestic hot water have been proposed, with the aim of reducing the building electrical consumption needed to keep comfort conditions. This study investigates the environmental impact of an innovative system proposed for residential buildings in the Mediterranean climate through a life cycle assessment. Results show that, due to the complexity of the system, the manufacturing and disposal stages have a high environmental impact, which is not compensated by the reduction of the impact during the operational stage., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 768824 (HYBUILD). This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849- B-C31 - MCIU/AEI/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Methods for the determination of the state-of-charge of a thermal energy storage device

  • Zsembinszki, Gabriel
  • Vérez, David
  • Mselle, Boniface Dominick
  • Borri, Emiliano
  • Luisa F. Cabeza
This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 768824 (HYBUILD). This work is partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE) and the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018- 102431-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme. Boniface Dominick Mselle would like to thank Programa Santander Predoc UdL for his research fellowship.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Recent trends and future perspectives on the use of phase change materials for thermal energy storage (CIES 2022)

  • Cabeza, Luisa F.
  • Borri, Emiliano
Vision: Being a reference group of engineering at an international level, always linked to the University of Lleida. Mission: To propose solutions to the industry in the fields of sustainability, energy engineering and control, through research, technology transfer and training. Objectives: To improve existing knowledge through research and innovation ; To help increase the competitiveness of companies through collaborations, whether for the design of new products or as a technology consultancy., This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31-MCIU/AEI/FEDER,UE), Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T-MCIU/AEI), Agencia Estatal de Investigación (AEI) - Ministerio de Ciencia, Innovación y Universidades (PCI2020-120695-2/AEI/10.13039/501100011033). Funding has also been received from European Union’s Horizon 2020 research and innovation program sunder projects SWS-HEATING (764025), CO-COOL (101007976), and CSPplus (CofundERA-NETAction, N°838311) The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017SGR1537) and the ICREA Catalan institution for awarding the ICREA Academy, for these condconsecutive time. GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Experimental comparison of small-scale and full-scale latent storage for integration in efficient heat pumps

  • Palomba, Valeria
  • Mselle, Boniface Dominick
  • Vérez, David
  • Borri, Emiliano
  • Varvagiannis, Efstratios
  • Monokrousou, Evropi
  • Nitsch, Birgo
  • Strehlow, Andreas
  • Barmparitsas, Nikolaos
  • Leontaritis, Aris
  • Bonanno, Angelo
  • Dino, Giuseppe E.
  • Zsembinszki, Gabriel
  • Karellas, Sotirios
  • Frazzica, Andrea
  • Cabeza, Luisa F.
This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 768824 (HYBUILD). This work is partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE) and the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018- 102431-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme. Boniface Dominick Mselle would like to thank Programa Santander Predoc UdL for his research fellowship.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Life cycle assessment (LCA) of an innovative solar-biomass energy system in continental climate

  • Borri, Emiliano
  • Palomba, Valeria
  • Charalampidis, Antonios
  • Frazzica, Andrea
  • Karellas, Sotirios
  • Cabeza, Luisa F.
Hybrid energy systems applied to buildings are an effective solution to increase the share of energy produced by renewable sources to satisfy both thermal end electrical energy demand. In this study, the environmental impact of an innovative energy system based on the use of solar energy and biomass for heating, cooling, DHW, and electricity production was evaluated through life-cycle assessment (LCA) and compared to a reference standard system to be used in a multi-family house building located in a continental climate., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 814945 (SolBio-Rev). This work was partially funded by Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades-Agencia Estatal de Investigación (AEI) (RED2018-102431- T- AEI). This work is partially supported by ICREA under the ICREA Academia programme. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Desarrollo y prueba de un nuevo módulo de hormigón como material de almacenamiento de energía térmica para plantas de concentración solar de potencia

  • Cofré-Toledo, Jonathan
• La tecnología de Concentración Solar de Potencia (CSP) puedo almacenar calor y transformarlo en electricidad durante el día y la noche. • La radiación solar incide sobre espejos (helióstatos) que reflejan y concentran la luz en un receptor solar ubicado en la parte superior de una torre. • En el interior del receptor circula un fluido que absorbe el calor del sol alcanzando temperaturas de más de 550 ºC. • El fluido puede ser una sal fundida o un aceite sintético. El calor se puede almacenar en un bloque de hormigón y puede ser utilizado para generar vapor de agua a alta presión, el cual hará girar una turbina. • La turbina genera electricidad que se transmite a través de cables y postes hacia las ciudades e industrias., Este trabajo está parcialmente financiado por el Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (AEI) (PID2021- 123511OB-C31 - MCIN/AEI/10.13039/501100011033/FEDER, UE), la Agencia Estatal de Investigación (AEI) - Ministerio de Ciencia e Innovación (PCI2020-120695-2/AEI/10.13039/501100011033) y el Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). Los autores agradecen al Gobierno de Cataluña la acreditación de calidad concedida al grupo de investigación GREiA (2017 SGR 1537). GREiA es un agente certificado TECNIO en la categoría de desarrolladores tecnológicos del Gobierno de Cataluña. Este trabajo está parcialmente apoyado por ICREA dentro del programa ICREA Academia. El proyecto NitRecerCat (GA 101061189) está cofinanciado por el programa de investigación e innovación Horizonte Europa de la Unión Europea.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Energia renovable, nova economia i abandonament o reforçament dels petits municipis

  • Cabeza, Luisa F.
  • Zsembinszki, Gabriel
  • Gasa, Gemma
Aquest treball està parcialment finançat pel Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 (FEDER)), Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T), Agencia Estatal de Investigación (AEI) - Ministerio de Ciencia, Innovación y Universidades (PCI2020-120695- 2/AEI/10.13039/501100011033), y Secretaria de Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya i és co-finançat per la Unió Europea a través del Fons Europeu de Desenvolupament Regional (FEDER) (2019PROD00101). També s’ha rebut finançament de l’Horitzo 2020 de l’Unió Europea dins de programes de recerca i innovació amb els projectes Innova MicroSOLAR (723596), HYBUILD (768824), SWSHEATING (764025), SolBio-Rev (814945) i CSPplus (Cofund ERA-NET Action, N° 838311). Agraïr també al Govern Català per l’acreditació de qualitat donada al grup de recerca (2017 SGR 1537) i a la institució catalana ICREA per la concessió de l’ICREA Acadèmia, per segona vegada consecutiva. GREiA és agent certificat TECNIO en la categoria de desenvolupadors de tecnologia de la Generalitat de Catalunya.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

State of art of PCM for air conditioning and refrigeration

  • Cabeza, Luisa F.
Vision: Being a reference group of engineering at an international level, always linked to the University of Lleida. Mission: Propose solutions to the industry in the fields of sustainability, energy engineering and control, through research, technology transfer and training. Objectives: Improve existing knowledge through research and innovation ; Help increase the competitiveness of companies through collaborations, whether for the design of new products or as a technology consultancy, This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE), the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T), and the Secretaria de Universitats i Recerca of the Departament d'Empresa i Coneixement of the Generalitat de Catalunya (2019 PROD 00101 (AGAUR/FEDER)). Funding has also been received from European Union’s Horizon 2020 research and innovation programs under projects, HYBUILD (768824), SWS-HEATING (764025). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Phase change materials: is it still the starring technology of thermal energy storage? Current applications, perspectives and research gaps

  • Cabeza, Luisa F.
  • Borri, Emiliano
This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE), the Ministerio de Economia y Competitividad (TIN2015-71799-C2-2-P (MINECO/FEDER)), the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T), the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (PCI2020-120695-2 through PCI call), and the Secretaria de Universitats i Recerca of the Departament d'Empresa i Coneixement of the Generalitat de Catalunya (2019 PROD 00101 (AGAUR/FEDER)). Funding has also been received from European Union’s Horizon 2020 research and innovation programs under projects Innova MicroSOLAR (723596), HYBUILD (768824), SWS-HEATING (764025), SolBio-Rev (814945) and EuNightCat20 (954506). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Estudio experimental sobre el impacto del factor de empaquetamiento en un almacenamiento de energía térmica a escala de prototipo con materiales de cambio de fase en forma tubular

  • Vérez, David
  • Borri, Emiliano
  • Ure, Zafer
  • Zsembinszki, Gabriel
  • Cabeza, Luisa F.
El almacenamiento de energía térmica (TES) es esencial para mejorar la penetración de las energías renovables. Entre todas las tecnologías de almacenamiento, el almacenamiento de energía térmica por calor latente (LTES) con el uso de materiales de cambio de fase ha ganado atención debido a su alta densidad energética. La macro-encapsulación es la técnica más común para incluir PCM en un depósito de almacenamiento. Sin embargo, el diseño del almacenamiento y la distribución del PCM macro-encapsulado tienen un gran impacto sobre la transferencia de calor y la capacidad de almacenamiento de energía. En este estudio se probó experimentalmente un depósito de PCM a escala piloto con una capacidad de almacenamiento de 13 kWh utilizando PCM macro-encapsulado con dos factores de empaquetamiento diferentes., Thermal energy storage (TES) is essential to improve the penetration of renewable energies. Among all storage technologies, latent heat thermal energy storage (LTES) using phase change materials has gained attention due to its high energy density. Macro-encapsulation is the most common technique to include PCM in a storage tank. However, the design of the storage and the distribution of the macro-encapsulated PCM have a great impact on heat transfer and energy storage capacity. In this study, a pilot-scale PCM tank with a storage capacity of 13 kWh was experimentally tested using macro-encapsulated PCM with two different packaging factors., Este estudio está parcialmente financiado por la Unión Europea SWS-HEATING (GA 764025), por el Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE) y por el Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). Los autores de la Universidad de Lleida agradecen al Gobierno de Cataluña por la acreditación de calidad concedida al grupo de investigación GREiA (2017 SGR 1537). GREiA es un agente certificado TECNIO en la categoría de desarrolladores tecnológicos del Gobierno de Cataluña. Este trabajo está parcialmente apoyado con ICREA dentro del programa ICREA Academia.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Desarrollo y optimización de nuevos PCM en base a sales inorgánicas, para su aplicación en sistemas de almacenamiento de energía térmica a altas temperaturas (vídeo) (Nit Europea de la Recerca 2022)

  • Martínez, Franklin R.
Las plantas de concentración solar de potencia CSP, son instalaciones industriales donde se aprovecha la radiación solar para producir energía eléctrica. Los rayos solares son reflejados desde una superficie extensa y concentrados en un solo punto (superficie reducida) para calentar el fluido calo portador (HTF) a una temperatura de 565ºC, este fluido caliente ingresa al intercambiador de calor donde cede al agua el calor acumulado, produciendo vapor, el cual ingresa a la turbina donde se genera energía eléctrica., F. Rodrigo Martínez Alcocer agradece a la Beca Doctorado Nacional para estudiantes extranjeros ANID 2021 Folio 21211932 por el apoyo financiero en la investigación. Los autores agradecen al Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31 - MCIN/AEI/10.13039/501100011033/FEDER, UE) y el Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). Los autores agradecen al gobierno de Cataluña la acreditación de calidad al grupo de investigación GREiA (2017 SGR 1537). GREiA tiene la acreditación como agente TECNIO en la categoría de desarrolladores tecnológicos del gobierno de Cataluña. También el presente trabajo tiene un apoyo de ICREA en el programa ICREA Academia. Este trabajo está cofinanciado por el programa de investigación e innovación Horizon Europe de la Unión Europea bajo el proyecto NitRecerCat (GA 101061189).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Recent trends and future perspectives on the use of phase change materials for thermal energy storage (EIRES 2022)

  • Cabeza, Luisa F.
  • Borri, Emiliano
Vision: Being a reference group of engineering at an international level, always linked to the University of Lleida. Mission: To propose solutions to the industry in the fields of sustainability, energy engineering and control, through research, technology transfer and training. Objectives: To improve existing knowledge through research and innovation ; To help increase the competitiveness of companies through collaborations, whether for the design of new products or as a technology consultancy, This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31-MCIU/AEI/FEDER,UE), Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T-MCIU/AEI), Agencia Estatal de Investigación (AEI) - Ministerio de Ciencia, Innovación y Universidades (PCI2020-120695-2/AEI/10.13039/501100011033). Funding has also been received from European Union’s Horizon 2020 research and innovation program sunder projects SWS-HEATING (764025), CO-COOL (101007976), and CSPplus (CofundERA-NETAction, N°838311) The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017SGR1537) and the ICREA Catalan institution for awarding the ICREA Academy, for these condconsecutive time. GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Experimental study of a LiCl/Silica gel sorption thermal energy storage prototype

  • Crespo, Alicia
  • Palomba, Valeria
  • Mikhaeil, Makram
  • Dawoud, Belal
  • Gracia Cuesta, Alvaro de
  • Cabeza, Luisa F.
High gas and electricity prices and the desire of decarbonizing the energy sector requires more utilization of renewable sources, such as solar energy. Considering residential applications in Middle and Norther Europe, high space heating demands exist along with low solar irradiation during winter. Nevertheless, a high solar irradiation intensity is available during summer. Seasonal thermal energy storage (STES) can be a solution to solve such a time mismatch [1]. Sorption thermal energy storage (TES) technology is gaining attention in the last years for its potential application as long-term (e.g., seasonal) TES due its low thermal losses during the idle period (very important in long-term storage) and its high potential energy storage density. In a sorption TES, heat is stored thanks to the breakup of physical bonds between the sorbent material and the adsorbed fluid. Thus, as long as both elements are kept separated, the thermal losses are zero. Moreover, sorption TES is very suitable for residential applications since the adsorbent materials can be charged at regeneration temperatures below 100 ºC (no need of concentrating solar thermal collectors) and can be discharged at adsorption temperatures which match with the end user temperature of space heating systems [2]. Sorption technology has been already studied in the literature for different applications (e.g., chillers, heat pumps, TES), mainly focused on material [3,4] and on small-scale adsorbent reactors [5]. Furthermore, different materials have been studied: pure solid sorbent materials, composite sorbent materials and sorbent materials that can exploit also chemical reactions. Nevertheless, despite its potential, they have some intrinsic limitations that do not allow to reach the theoretical energy density values under real operating conditions [3]. Selective water sorbents (SWS) or salt inside porous matrix composites (SPMCs), such as LiCl-silica gel, present several advantages over traditional adsorbents as long as the salt is hold inside the pores [3]. SWS have been already studied at material level by Frazzica et al. [3] for the application in seasonal TES in Central and Northern Europe TES. The investigations have been carried out under the H2020 European project “SWS-Heating”. In the present study, the very first adsorption TES prototype has been preliminary experimentally investigated at ITAE laboratories (Italy). The adsorption heat exchanger of the first prototype is filled in with 8.9 kg of an SWS material manufactured by impregnating mesoporous silica gel with 30wt.% of LiCl., This project was funded by the European Union’s Horizon 2020 Research and Innovation Pro-gramme under No. 764025 (SWS-HEATING). This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31—MCIU/AEI/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades—Agencia Estatal de Investigación (AEI) (RED2018-102431-T). This work is partially supported by ICREA under the ICREA Academia program. Alicia Crespo would also like to acknowledge the financial support of the FI-SDUR grant from the AGAUR. The authors at the University of Lleida would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

The role of buildings in climate change mitigation

  • Cabeza, Luisa F.
This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31-MCIU/AEI/FEDER,UE), Ministerio de Ciencia, Innovación y Universidades-Agencia Estatal de Investigación(AEI)(RED2018-102431-T-MCIU/AEI), Agencia Estatal de Investigación(AEI)-Ministerio de Ciencia, Innovación y Universidades (PCI2020-120695-2/AEI/10.13039/501100011033), and Secretaria de Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya and is co-financed by the European Union through the European Regional Development Fund(FEDER)(2019PROD00101). Funding has also be enreceived from European Union’s Horizon2020 research and innovation programs under projects Innova MicroSOLAR (723596), HYBUILD (768824), SWS-HEATING (764025), SolBio-Rev (814945), CSPplus (Cofund ERA-NET Action, N°838311), and CO-COOL (101007976). The authors would like to thank the Catalan Government for the quality accreditation given to the irresearch group (2017SGR1537) and the ICREA Catalan institution for awarding the ICREA Academy, for the second consecutive time. GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Control inteligente en sistemas de almacenamiento térmico estacional (vídeo)

  • Crespo, Alicia
¿Qué es un sistema de almacenamiento de energía térmica estacional? Es un sistema de almacenamiento que almacena calor (normalmente del sol) durante el verano y lo libera en invierno cuando existe una necesidad de calefacción y no hay o hay muy poca irradiación solar. Este sistema es perfecto para climas noreuropeos. ¿Por qué usar un sistema de almacenamiento por sorción? Porque funciona muy bien de forma estacional ya que presenta bajas pérdidas térmicas a largo plazo. Además tiene elevada densidad energética, es decir, puede almacenar mucho calor por volumen de material., Alicia Crespo agradece la financiación económica de la beca FI-SDUR de la AGAUR de la Generalitat de Catalunya y la Secretaria d’Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya. Este trabajo está parcialmente financiado por el Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31 - MCIN/AEI/10.13039/501100011033/FEDER, UE) y el Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). Los autores agradecen al Gobierno de Cataluña la acreditación de calidad concedida al grupo de investigación GREiA (2017 SGR 1537). GREiA es un agente certificado TECNIO en la categoría de desarrolladores tecnológicos del Gobierno de Cataluña. Este trabajo está parcialmente apoyado por ICREA dentro del programa ICREA Academia. Este Proyecto recibe financiación de los programas de investigación e innovación Horizonte 2020 de la Unión Europea en el marco del proyecto en el proyecto SWS-Heating (No 764025). El proyecto NitRecerCat (GA 101061189) está cofinanciado por el programa de investigación e innovación Horizonte Europa de la Unión Europea.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Life cycle assessment of an innovative hybrid energy storage system for residential buildings

  • Llantoy, Noelia
  • Zsembinszki, Gabriel
  • Cabeza, Luisa F.
Acknowledgements ThisprojecthasreceivedfundingfromtheEuropeanUnion’sHorizon2020researchandinnovationprogrammeundergrantagreementNo768824(HYBUILD).ThisworkispartiallyfundedbytheMinisteriodeCiencia,InnovaciónyUniversidadesdeEspaña(RTI2018-093849-B-C31-MCIU/AEI/FEDER,UE)andtheMinisteriodeCiencia,InnovaciónyUniversidades-AgenciaEstataldeInvestigación(AEI)(RED2018-102431-T).TheauthorswouldliketothanktheCatalanGovernmentforthequalityaccreditationgiventotheirresearchgroup(2017SGR1537).GREiAisacertifiedagentTECNIOinthecategoryoftechnologydevelopersfromtheGovernmentofCatalonia.ThisworkispartiallysupportedbyICREAundertheICREAAcademiaprogramme.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Control inteligente en sistemas de almacenamiento térmico estacional

  • Crespo, Alicia
¿Qué es un sistema de almacenamiento de energía térmica estacional? Es un sistema de almacenamiento que almacena calor (normalmente del sol) durante el verano y lo libera en invierno cuando existe una necesidad de calefacción y no hay o hay muy poca irradiación solar. Este sistema es perfecto para climas noreuropeos. ¿Por qué usar un sistema de almacenamiento por sorción? Porque funciona muy bien de forma estacional ya que presenta bajas pérdidas térmicas a largo plazo. Además tiene elevada densidad energética, es decir, puede almacenar mucho calor por volumen de material., Alicia Crespo agradece la financiación económica de la beca FI-SDUR de la AGAUR de la Generalitat de Catalunya y la Secretaria d’Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya. Este trabajo está parcialmente financiado por el Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31 - MCIN/AEI/10.13039/501100011033/FEDER, UE) y el Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). Los autores agradecen al Gobierno de Cataluña la acreditación de calidad concedida al grupo de investigación GREiA (2017 SGR 1537). GREiA es un agente certificado TECNIO en la categoría de desarrolladores tecnológicos del Gobierno de Cataluña. Este trabajo está parcialmente apoyado por ICREA dentro del programa ICREA Academia. Este Proyecto recibe financiación de los programas de investigación e innovación Horizonte 2020 de la Unión Europea en el marco del proyecto en el proyecto SWS-Heating (No 764025). El proyecto NitRecerCat (GA 101061189) está cofinanciado por el programa de investigación e innovación Horizonte Europa de la Unión Europea.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Desarrollo de una herramienta computacional de simulación de sistemas de almacenamiento térmico (TES) para plantas de concentración solar

  • Tagle-Salazar, Pablo D.
¿Qué es un Sistema de almacenamiento térmico? Un sistema que almacena energía en forma de calor para usarlo como fuente cuando su recurso primario no está disponible. Enfocado a concentración solar, la fuente es la radiación solar. Ventajas/Desventajas Principal desventaja: La planta solar puede generar electricidad en las noches o en días nublados. Principal desventaja: Altos costos (materiales, instalación, O&M)., Este trabajo está parcialmente financiado por el Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (PID2021- 123511OB-C31 - MCIN/AEI/10.13039/501100011033/FEDER, EU), la Agencia Estatal de Investigación (AEI) - Ministerio de Ciencia e Innovación (PCI2020-120695-2/AEI/10.13039/501100011033) y el Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). Los autores agradecen al Gobierno de Cataluña la acreditación de calidad concedida al grupo de investigación GREiA (2017 SGR 1537). GREiA es un agente certificado TECNIO en la categoría de desarrolladores tecnológicos del Gobierno de Cataluña. Este trabajo está parcialmente apoyado por ICREA dentro del programa ICREA Academia. El proyecto NitRecerCat (GA 101061189) está cofinanciado por el programa de investigación e innovación Horizonte Europa de la Unión Europea
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Deep learning optimal control for a solar-biomass system for residential buildings

  • Zsembinszki, Gabriel
  • Fernàndez Camon, César
  • Borri, Emiliano
  • Cabeza, Luisa F.
Nowadays, it is well known that the reduction of energy consumption in buildings is crucial to achieve a substantial reduction of gas emission to the atmosphere and decrease the fast depletion of energy sources. Indeed, buildings are responsible for almost 40% of the overall energy consumption and gas emission into the atmosphere [1], therefore, immediate actions are needed. The reduction of the energy demand through passive solutions (i.e. building envelope) has been taking into account in directives such as the Energy Performance of Buildings Directive [2]. However, the generation of energy through efficient systems and the use of renewable sources is also required to achieve deep decarbonisation of the grid. However, the main disadvantage of renewable sources is represented by their daily and seasonal intermittency. Therefore, a system that allows the combination of more of them can provide a higher flexibility and increase the total share of renewables to meet energy needs in buildings., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 814945 (SolBio-Rev). This work was partially funded by Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE), Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T - MCIU/AEI). This work is partially supported by ICREA under the ICREA Academia programme. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Desarrollo y prueba de un nuevo módulo de hormigón como material de almacenamiento de energía térmica para plantas de concentración solar de potencia (vídeo)

  • Cofré-Toledo, Jonathan
• La tecnología de Concentración Solar de Potencia (CSP) puedo almacenar calor y transformarlo en electricidad durante el día y la noche. • La radiación solar incide sobre espejos (helióstatos) que reflejan y concentran la luz en un receptor solar ubicado en la parte superior de una torre. • En el interior del receptor circula un fluido que absorbe el calor del sol alcanzando temperaturas de más de 550 ºC. • El fluido puede ser una sal fundida o un aceite sintético. El calor se puede almacenar en un bloque de hormigón y puede ser utilizado para generar vapor de agua a alta presión, el cual hará girar una turbina. • La turbina genera electricidad que se transmite a través de cables y postes hacia las ciudades e industrias., Este trabajo está parcialmente financiado por el Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (AEI) (PID2021- 123511OB-C31 - MCIN/AEI/10.13039/501100011033/FEDER, UE), la Agencia Estatal de Investigación (AEI) - Ministerio de Ciencia e Innovación (PCI2020-120695-2/AEI/10.13039/501100011033) y el Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). Los autores agradecen al Gobierno de Cataluña la acreditación de calidad concedida al grupo de investigación GREiA (2017 SGR 1537). GREiA es un agente certificado TECNIO en la categoría de desarrolladores tecnológicos del Gobierno de Cataluña. Este trabajo está parcialmente apoyado por ICREA dentro del programa ICREA Academia. El proyecto NitRecerCat (GA 101061189) está cofinanciado por el programa de investigación e innovación Horizonte Europa de la Unión Europea.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Avaluació de la configuració de diferents plantes de concentració solar (CSP) mitjançant eines d’avaluació del cicle de vida (ACV) (vídeo)

  • Gasa, Gemma
Totes les tecnologies de concentració solar (CSP) utilitzen una configuració per concentrar l’energia de la llum solar en un receptor i convertir-la en calor. L'energia tèrmica es pot utilitzar per crear vapor que condueixi una turbina per produir energia elèctrica o es pot utilitzar com a procés industrial de calor., Aquest treball està parcialment finançat pel el Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31 - MCIN/AEI/10.13039/501100011033/FEDER, UE) i pel Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). Els autors agraeixen al Govern de Catalunya l‟acreditació de qualitat concedida al grup de recerca GREiA (2017 SGR 1537). GREiA és un agent certificat TECNIO dins la categoria de desenvolupadors tecnològics del Govern de Catalunya. Aquest treball està parcialment recolzat per ICREA dins del programa ICREA Acadèmia. El projecte NitRecerCat (GA 101061189) està cofinançat pel programa de recerca i innovació Horitzó Europa de la Unió Europea.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Life cycle assessment (LCA) of concentrating solar power (CSP) plant in tower configuration with and without thermal energy storage (TES)

  • Gasa, Gemma
  • López-Román, Antón
  • Cabeza, Luisa F.
  • Prieto, Cristina
INTRODUCTION: The main objective of the present study is to compare the 30-year life cycle assessment of two concentrating solar power systems with tower configuration, one without thermal energy storage and the other with thermal energy storage, in order to assess their potential impact on the environment. To achieve this aim, common reference characteristics have been defined in order to allow the optimal comparison. The reference power considered for both technologies has been 110 MW and the "power cycle" (turbine, alternator and generator) and the "cooling system" are the same in both configuration. In general terms, the significant differences between both configurations are focused on the area of the solar field, and with it the number of heliostats, and on the storage of thermal energy by inorganic salts. Although it is true that concentrating solar power plant (CSP) in tower without thermal energy storage is not a current commercial configuration, it is very interesting to be able to compare the environmental impacts of both configurations when thermal energy storage is added to the solar plant. In addition, the study ends by assessing whether the environmental impact that is generated by adding thermal energy storage compensates with the improvement of its manageability, its dispatchability and its contribution to decarbonisation. METHOD: Life cycle assessment (LCA) is a methodology that allows evaluating the environmental loads associated with a product, process or activity, identifying and quantifying the energy, the materials consumed and the waste released into the environment throughout the entire life cycle. The LCA included in this study is carried according to ISO 14040 and 14044. Thus, this LCA is based on the impact assessment method ReCiPe in impact points and GWP in kgCO2eq and the database used is Ecoivent 3.6, which has positioned itself as a world leader in creating more transparent life cycle impact databases. Moreover, this work encompasses three distinct phases of evaluation: manufacturing, operational, and end of life. RESULTS AND CONCLUSIONS: At the time of submitting this abstract, the study is on its way., This work was supported under the umbrella of CSP-ERA-Net 1st Cofund Joint Call by AEI - Spanish Ministry of Science, Innovation and Universities, TÜBITAK - Scientific and Technological Research Council of Turkey, and CSO - Israeli Ministry of Energy. CSP-ERA-Net is supported by the European Commission within the EU Framework Programme for Research and Innovation HORIZON 2020 (Cofund ERA-NET Action, N° 838311) and it was partially funded by Agencia Estatal de Investigación (AEI) - Ministerio de Ciencia, Innovación y Universidades (PCI2020-120695- 2/AEI/10.13039/501100011033), Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE), and Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018- 102431-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Experimental analysis of a small size vacuum insulated water tank

  • Borri, Emiliano
  • Vérez, David
  • Zsembinszki, Gabriel
  • Dawoud, Belal
  • Cabeza, Luisa F.
This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 764025 (SWS-HEATING). This work is partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE) and the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Steel slag concrete: thermo-mechanical stability under high-temperature cycles

  • Boquera, Laura
  • Castro Chicot, José Ramón
  • Fernández, Ángel G.
  • Navarro Ezquerra, Antonia
  • Pisello, Anna Laura
  • Cabeza, Luisa F.
INTRODUCTION: The improvement of the output efficiency in CSP plants is a challenge of major interest. To achieve this objective, an increase of temperature in the heat transfer and the storage media is required to increase power block efficiency. Among the suitable material options, concrete was determined to have attractive properties. Concrete is a heterogeneous material, made of several components that allows to choose the best dosage to obtain the desired properties in the final blender. Worldwide availability of concrete components and their low cost, contribute to implement eco-friendly measures. The environmental impact of the materials is a substantial parameter to take into consideration when selecting concrete components. There are by-products from industries that can be revalorized by including them into concrete mixtures, replacing cement percentage or using them as aggregates. A by-product from the metallurgy industry, known as steel slag or electric arc furnace slag, was previously studied as aggregates in concrete for thermal energy storage. In this paper, the thermal stability under high-temperature cycles, of two cement types with steel slag as the only aggregate in the concrete mixture is compared. As further novelty, the thermal cycles were adapted to heating rates currently used in the operation of a CSP plant. MATERIALS AND METHODS: In the present study two concrete dosages were designed. One using ordinary Portland cement and the other with calcium aluminate cement. In both binders, steel slag was used as aggregate, considering granulometries of 0-12 mm. Physical, thermal and mechanical properties were studied before and after thermal cycles. To study the thermal stability, 10 continuous thermal cycles were carried out. The thermal cycle profile consisted on a first cycle with a low heating rate 1 ºC/min up to 290 ºC followed by an isothermal step of 4 hours. Continuously, temperature increased up to 700 ºC with the same heating rate and maintaining during 4 hours. After, the samples were cooled down to 290 ºC, at a rate below 1 ºC/min. For the next cycles the heating rate was increased to 15 ºC/min, considering the same time for the isothermal steps and the cooling part. RESULTS: The external appearance showed a geometry preservation in all samples. There were no important cracks in the surface, only micro-fissures in the samples after some thermal cycles. There is a strong connection between the aggregates and both types of cement paste, conferring a bonding in the concrete mixture. No spalling signs nor thermal expansion of aggregates was observed. The mass loss was around 4 % in both mixtures after the thermal cycles. The thermal conductivity was reduced 50 % after the 10 thermal cycles. Despite the high compressive strength obtained before any thermal treatment, the compressive strength drastically decreased 80 % after the 10 thermal cycles. CONCLUSIONS: Despite the low thermal conductivity achieved after thermal cycles, a high integrity preservation of the concrete mixtures was observed. The compatibility of steel slag highlight with both cement types conferring a hydraulic bonding to the mixture, appreciating small fissures., CSPplus is supported under the umbrella of CSP-ERA-Net 1st Cofund Joint Call by AEI - Spanish Ministry of Science, Innovation and Universities, TÜBITAK - Scientific and Technological Research Council of Turkey, and CSO - Israeli Ministry of Energy. CSP-ERA-Net is supported by the European Commission within the EU Framework Programme for Research and Innovation HORIZON 2020 (Cofund ERA-NET Action, N° 838311) and this work was partially funded by Agencia Estatal de Investigación (AEI) - Ministerio de Ciencia, Innovación y Universidades (PCI2020-120695-2/AEI/10.13039/501100011033), Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE), and Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Desarrollo y optimización de nuevos PCM en base a sales inorgánicas, para su aplicación en sistemas de almacenamiento de energía térmica a altas temperaturas (Nit Europea de la Recerca 2022)

  • Martínez, Franklin R.
Las plantas de concentración solar de potencia CSP, son instalaciones industriales donde se aprovecha la radiación solar para producir energía eléctrica. Los rayos solares son reflejados desde una superficie extensa y concentrados en un solo punto (superficie reducida) para calentar el fluido calo portador (HTF) a una temperatura de 565ºC, este fluido caliente ingresa al intercambiador de calor donde cede al agua el calor acumulado, produciendo vapor, el cual ingresa a la turbina donde se genera energía eléctrica., F. Rodrigo Martínez Alcocer agradece a la Beca Doctorado Nacional para estudiantes extranjeros ANID 2021 Folio 21211932 por el apoyo financiero en la investigación. Los autores agradecen al Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31 - MCIN/AEI/10.13039/501100011033/FEDER, UE) y el Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). Los autores agradecen al gobierno de Cataluña la acreditación de calidad al grupo de investigación GREiA (2017 SGR 1537). GREiA tiene la acreditación como agente TECNIO en la categoría de desarrolladores tecnológicos del gobierno de Cataluña. También el presente trabajo tiene un apoyo de ICREA en el programa ICREA Academia. Este trabajo está cofinanciado por el programa de investigación e innovación Horizon Europe de la Unión Europea bajo el proyecto NitRecerCat (GA 101061189).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Life Cycle Assessment (LCA) of Several Concentrating Solar Plants (CSP) in Tower Configuration with Different Storage Capacity in Molten Salts

  • Gasa, Gemma
  • López-Román, Antón
  • Prieto, Cristina
  • Cabeza, Luisa F.
The objective of this study is to analyse the impact of the thermal energy storage system (TES) in the life cycle assessment (LCA) of a concentrating solar power plant (CSP) with central receiver technology. The study uses a base case of a plant with 110 MWel and 17.5 hours of direct storage with molten salts. First, this plant was compared with a plant of equal power but without storage. Subsequently, the LCAs of four plants with different thermal energy storage capacities, 3, 6, 9 and 17.5 equivalent hours, were compared. The results show that TES is key for solar thermal plants, not only to guarantee dispatch capacity, but also to reduce their environmental impact. Comparing different thermal storage capacities, the most environmentally efficient plant of those analysed is the one with a storage capacity of 9 h., This work is part of PCI2020-120695-2 projects funded by Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (MCIN/AEI/10.13039/501100011033) and by the European Union “NextGenerationEU”/PRTR”. This work was partially funded by the Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31 - MCIN/AEI/10.13039/501100011033/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T- MCIU/AEI). The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREiA (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Social Acceptance of TES

  • Cabeza, Luisa F.
This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE), Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T - MCIU/AEI), Agencia Estatal de Investigación (AEI) - Ministerio de Ciencia, Innovación y Universidades (PCI2020-120695- 2/AEI/10.13039/501100011033), and Secretaria de Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya and is co-financed by the European Union through the European Regional Development Fund (FEDER) (2019PROD00101). Funding has also been received from European Union’s Horizon 2020 research and innovation programs under projects Innova MicroSOLAR (723596), HYBUILD (768824), SWS-HEATING (764025), SolBio-Rev (814945), CSPplus (Cofund ERA-NET Action, N° 838311), and CO-COOL (101007976). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537) and the ICREA Catalan institution for awarding the ICREA Academy, for the second consecutive time. GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Soluciones de almacenamiento de energía térmica para edificios (vídeo)

  • Vérez, David
Este trabajo está parcialmente financiado por el Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (AEI) (PID2021- 123511OB-C31 - MCIN/AEI/10.13039/501100011033/FEDER, UE) y el Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). Los autores agradecen al Gobierno de Cataluña la acreditación de calidad concedida al grupo de investigación GREiA (2017 SGR 1537). GREiA es un agente certificado TECNIO en la categoría de desarrolladores tecnológicos del Gobierno de Cataluña. Este trabajo está parcialmente apoyado por ICREA dentro del programa ICREA Academia. El proyecto NitRecerCat (GA 101061189) está cofinanciado por el programa de investigación e innovación Horizonte Europa de la Unión Europea.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Use of reinforcement learning to optimize the control of solar thermal collectors coupled to seasonal thermal energy storage

  • Crespo, Alicia
  • Gracia Cuesta, Alvaro de
  • Vérez, David
  • Cabeza, Luisa F.
  • Fernàndez Camon, César
This work is partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE) and the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme. This project has received funding from the European Union´s Horizon 2020 research and innovation programme under the No 764025 (SWS-Heating). Alicia Crespo would also like to acknowledge the financial support of the FI-SDUR grant from the AGAUR of the Generalitat de Catalunya and Secretaria d’Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Avaluació de la configuració de diferents plantes de concentració solar (CSP) mitjançant eines d’avaluació del cicle de vida (ACV)

  • Gasa, Gemma
Totes les tecnologies de concentració solar (CSP) utilitzen una configuració per concentrar l’energia de la llum solar en un receptor i convertir-la en calor. L'energia tèrmica es pot utilitzar per crear vapor que condueixi una turbina per produir energia elèctrica o es pot utilitzar com a procés industrial de calor., Aquest treball està parcialment finançat pel el Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31 - MCIN/AEI/10.13039/501100011033/FEDER, UE) i pel Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). Els autors agraeixen al Govern de Catalunya l‟acreditació de qualitat concedida al grup de recerca GREiA (2017 SGR 1537). GREiA és un agent certificat TECNIO dins la categoria de desenvolupadors tecnològics del Govern de Catalunya. Aquest treball està parcialment recolzat per ICREA dins del programa ICREA Acadèmia. El projecte NitRecerCat (GA 101061189) està cofinançat pel programa de recerca i innovació Horitzó Europa de la Unió Europea.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Development of a new concrete for high-temperature thermal energy storage

  • Cabeza, Luisa F.
  • Boquera, Laura
  • Castro Chicot, José Ramón
  • Pisello, Anna Laura
Vision: Being a reference group of engineering at an international level, always linked to the University of Lleida. Mission: To propose solutions to the industry in the fields of sustainability, energy engineering and control, through research, technology transfer and training. Objectives: To improve existing knowledge through research and innovation ; To help increase the competitiveness of companies through collaborations, whether for the design of new products or as a technology consultancy., This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE), Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T - MCIU/AEI), Agencia Estatal de Investigación (AEI) - Ministerio de Ciencia, Innovación y Universidades (PCI2020-120695- 2/AEI/10.13039/501100011033), and Secretaria de Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya and is co-financed by the European Union through the European Regional Development Fund (FEDER) (2019PROD00101). Funding has also been received from European Union’s Horizon 2020 research and innovation programs under the project CSPplus (Cofund ERA-NET Action, N° 838311). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537) and the ICREA Catalan institution for awarding the ICREA Academy, for the second consecutive time. GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Experimental study of a novel three-fluids heat exchanger embedded with phase change materials for cooling applications

  • Mselle, Boniface Dominick
  • Zsembinszki, Gabriel
  • Vérez, David
  • Cabeza, Luisa F.
This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 768824 (HYBUILD). This work is partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE) and the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme. Boniface Dominick Mselle would like to thank Programa Santander Predoc UdL for his research fellowship.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Soluciones de almacenamiento de energía térmica para edificios

  • Vérez, David
Este trabajo está parcialmente financiado por el Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (AEI) (PID2021- 123511OB-C31 - MCIN/AEI/10.13039/501100011033/FEDER, UE) y el Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). Los autores agradecen al Gobierno de Cataluña la acreditación de calidad concedida al grupo de investigación GREiA (2017 SGR 1537). GREiA es un agente certificado TECNIO en la categoría de desarrolladores tecnológicos del Gobierno de Cataluña. Este trabajo está parcialmente apoyado por ICREA dentro del programa ICREA Academia. El proyecto NitRecerCat (GA 101061189) está cofinanciado por el programa de investigación e innovación Horizonte Europa de la Unión Europea.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

New Concept for High Temperature Thermal Energy Storage Using a Concrete Tank

  • Cabeza, Luisa F.
  • Vérez, David
  • Zsembinszki, Gabriel
  • Borri, Emiliano
  • Prieto, Cristina
The use of concrete is showing great potential as thermal energy storage material for concentrating solar power plants (CSP) due to its versatility, relatively low cost, and the possibility to reach a high operating temperature, above 500ºC thus increasing the plant efficiency. However, actual configurations based on concrete show different drawbacks including difficulties during the manufacturing on-site, different thermal expansion coefficients between concrete and pipes, and poor thermal conductivity of concrete. In order to address those challenges, this study proposes a new TES concrete tank concept based on three main pillars: modularity, improved concrete formulation, and direct contact concept. A preliminary assessment of the thermal performances of the new concept was analyzed through simulations showing the temperature distribution of the modules., This work is part of PCI2020-120695-2 projects funded by Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (MCIN/AEI/10.13039/501100011033) and by the European Union “NextGenerationEU”/PRTR”. This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T- MCIU/AEI). The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREiA (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Experimental study on the effect of flat and thin slab encapsulation design on a PCM tank

  • Vérez, David
  • Borri, Emiliano
  • Crespo, Alicia
  • Mselle, Boniface Dominick
  • Gracia Cuesta, Alvaro de
  • Zsembinszki, Gabriel
  • Cabeza, Luisa F.
This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 764025 (SWS-HEATING). This work is partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE) and the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme. Boniface Dominick Mselle would like to thank Programa Santander Predoc UdL for his research fellowship. Alicia Crespo would also like to acknowledge the financial support of the FI-SDUR grant from the AGAUR of the Generalitat de Catalunya and Secretaria d’Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

The hidden use of lithium in thermal energy storage systems: a bibliometric study

  • Cabeza, Luisa F.
  • Borri, Emiliano
  • Zsembinszki, Gabriel
Vision: Being a reference group of engineering at an international level, always linked to the University of Lleida. Mission: To propose solutions to the industry in the fields of sustainability, energy engineering and control, through research, technology transfer and training. Objectives: To improve existing knowledge through research and innovation ; To help increase the competitiveness of companies through collaborations, whether for the design of new products or as a technology consultancy., This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE), the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T) Funding has also been received from European Union’s Horizon 2020 research and innovation programs under project CO-COOL (101007976). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Recent trends and future perspectives on the use of phase change materials for thermal energy storage (CNIT 2022)

  • Cabeza, Luisa F.
  • Borri, Emiliano
Vision: Being a reference group of engineering at an international level, always linked to the University of Lleida. Mission: To propose solutions to the industry in the fields of sustainability, energy engineering and control, through research, technology transfer and training. Objectives: To improve existing knowledge through research and innovation ; To help increase the competitiveness of companies through collaborations, whether for the design of new products or as a technology consultancy., This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31-MCIU/AEI/FEDER,UE), Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T-MCIU/AEI), Agencia Estatal de Investigación (AEI) - Ministerio de Ciencia, Innovación y Universidades (PCI2020-120695-2/AEI/10.13039/501100011033). Funding has also been received from European Union’s Horizon 2020 research and innovation program sunder projects SWS-HEATING (764025), CO-COOL (101007976), and CSPplus (CofundERA-NETAction, N°838311) The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017SGR1537) and the ICREA Catalan institution for awarding the ICREA Academy, for these condconsecutive time. GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Definition of key performance indicators (KPIs) to evaluate innovative storage systems in concentrating solar power (CSP) plants

  • Cabeza, Luisa F.
  • Borri, Emiliano
  • Gasa, Gemma
  • Zsembinszki, Gabriel
  • López-Román, Antón
  • Prieto, Cristina
The increasing penetration of renewable energies into the energy system is leading to significant development and deployment of generation plants based on the use of solar energy. On large scale, concentrating solar power (CSP) plants is the starring technology. In those systems, thermal energy storage (TES) is an essential component that allows both providing dispatchability and increasing power production thus improving the plant efficiency and reducing both its size and cost. Current storage technologies are mainly based on solar salts (molten salts) and saturated steam, their main drawback being their operating temperatures. Therefore, the current challenge is to develop innovative solutions that allow CSP plants to work at higher temperatures to increase their efficiency. In order to allow the comparison of new TES concepts, the definition of proper key performance indicators (KPIs) helps to better identify the best storage solutions. This paper reports a preliminary selection of KPIs suitable for TES systems and their validation against the commercially available two-tanks molten salts storage concept for a 100 MW net capacity CSP tower plant to allow the comparison with innovative solutions. The results of this study can be used as a basis for comparison of TES technologies with the available ones, as well as to set the target for the research and development of future storage solutions., CSPplus is supported under the umbrella of CSP-ERA-Net 1st Cofund Joint Call by AEI - Spanish Ministry of Science, Innovation and Universities, TÜBITAK - Scientific and Technological Research Council of Turkey, and CSO - Israeli Ministry of Energy. CSP-ERA-Net is supported by the European Commission within the EU Framework Programme for Research and Innovation HORIZON 2020 (Cofund ERA-NET Action, N° 838311) and this work was partially funded by Agencia Estatal de Investigación (AEI) - Ministerio de Ciencia, Innovación y Universidades (PCI2020-120695-2/AEI/10.13039/501100011033), and Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades-Agencia Estatal de Investigación (AEI) (RED2018-102431-T- AEI). This work is partially supported by ICREA under the ICREA Academia programme. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.