Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Bipolar resistive switching on TiO2/Au by conducting Atomic Force Microscopy

  • Linares Moreau, Mercedes
  • Barella, Mariano
  • López Mir, Laura
  • Ghenzi, Néstor
  • Golmar, Federico
  • Granja, Leticia Paula
  • Ocal, Carmen
  • Levy, Pablo
In this work we present a Conducting Atomic Force Microscopy (CAFM) study of TiO2 thin films that display bipolar resistive switching behavior. Samples were synthesized by reactive sputtering after a lithography process to obtain the bottom Au electrodes on a SiO2/Si substrate. Pt and Pt-Ir coated tips were used for CAFM measurements. We compare these results with I-V characteristics of the same device with Al top electrodes in a crossbar pattern. We demonstrate the existence of two stable resistive states and the bipolar nature of the switching through current-voltage CAFM measurements, discussing the possible transport and switching mechanisms., The authors acknowledge financial support from PICT 2013-0778 “MeMOSat”, UNSAM-ECyT FP-001 and EULANET CERMAT project (PIRSES-GA-2011-295197)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

The superconducting transition in TES: possible role of vortex pair unbinding

  • Fàbrega, Lourdes
  • Camón, Agustín
  • Pobes, Carlos
  • Štrichovanec, Pavel
  • Jáudenes, Rosa M.
Póster presentado al International Workshop on Low Temperature Detectors (LTD), celebrado en Milan (Italia) del 22 al 26 de julio de 2019., The R(T,I,H) shape of the superconducting transition of Transition Edge Sensors (TESs) is crucial for their operation and performances. Its sharpness as a function of temperature and current influences the devices noise. Also, the behaviour of the resistance as a function of these three parameters can provide understanding of the physical phenomena governing the transition, which in turn can be essential to define optimization routes. Estimates of fundamental lengths of TESs suggest that they behave as dirty type II superconductors, likely two-dimensional (2D). The onset of dissipation in 2D superconductors at H=0 is most often related to the so-called Berezinskii-Kosterlitz-Thouless transition, that is, the thermal unbinding of vortex-antivortex pairs: this may cause the motion of free vortices through the film, which would result in a voltage drop across it for any applied electrical current, and thus the appearance of a finite resistance at a temperature below the superconducting mean field critical temperature. This flux motion is considered a possible source of excess noise in TESs. We have performed a study of the resistive transition of Mo/Au-based TESs with diverse sizes and critical temperatures, under different applied electrical currents and magnetic fields. We have found a distinct analytic expression for R(T,I) at zero magnetic field, which holds for all the devices analysed at low biases, from the appearance of resistance up to quite high R/Rn values in some cases. We argue that this expression might be indicative of a current assisted vortex pair unbinding mechanism, and discuss the possible impact of such an effect on the TES parameters and performances., Work financed by the Spanish Ministerio de Ciencia, Innovación y Universidades-MICINN (projects ESP2016-76683-C3-2-R and RTI2018-096686-B-C22) and the European Commission (H2020 project AHEAD: “Integrated activities for the high energy astrophysics domain”). Personnel from ICMAB acknowledge financial support from MINECO, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV- 2015-0496). RMJ wishes to thank MINECO for her FPI contract.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

AC/DC characterization of a Ti/Au TES with Au/Bi absorber for X-ray detection, Characterization of a Ti/Au TES with Au/Bi absorber under AC and DC bias

  • Taralli, Emanuele
  • Pobes, Carlos
  • Khosropanah, Pourya
  • Fàbrega, Lourdes
  • Camón, Agustín
  • Gottardi, Luciano
  • Nagayoshi, Kenichiro
  • Ridder, M.
  • Bruijn, Marcel
  • Gao, J. R.
Resumen del póster presentado al International Workshop on Low Temperature Detectors (LTD), celebrado en Milan (Italia) del 22 al 26 de julio de 2019., Transition-edge sensors (TESs) are used as very sensitive thermometers and microcalorimeters aimed at different wavelengths detection. In particular, for soft X-ray astrophysics, science goals require very high resolution microcalorimeters which can be achieved with TESs coupled to suitable absorbers. For many applications there is also need for a high number of pixels, which means to be multiplexed in the readout stage. Frequency Domain Multiplexing (FDM) is the baseline readout scheme, proposed for the ATHENA mission. FDM requires biasing the TES in AC at MHz frequencies. Recently there has been reported degradation in performances under AC with respect to DC bias. In order to assess the performances of TESs to be used with FDM, it is thus of great interest to compare the performances of the same device under AC and DC bias. Of course this means using two completely different setups and two different way of thinking the characterization measurements. Here we report the preliminary results of a single pixel characterization performed on a TiAu TES under AC and afterwards under DC bias in different facilities. Extraction of dynamical parameters and noise performances are compared in both cases as a first step for further AC/DC comparison of these devices., This work is partly funded by European Space Agency (ESA) and coordinated with other European efforts under ESA CTP contract ITT AO/1-7947/14/NL/BW. CSIC work financed by the Spanish Ministerio de Ciencia, Innovación y Universidades-MICINN (projects ESP2016-76683-C3-2-R and RTI2018-096686-BC22) and the European Commission (H2020 project AHEAD: “Integrated activities for the high energy astrophysics domain”). Personnel from ICMAB acknowledge financial support from MINECO, through the “Severo Ochoa” Programme (SEV-2015-0496).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Tunable Plasmonics by Self-Assembled Stretchable Superlattices on Macroscopic Scale

  • Charconnet, Mathias
  • Kuttner, Christian
  • Matricardi, Cristiano
  • Mihi, Agustín
  • Liz-Marzán, Luis Manuel
  • Seifert, Andreas
We present a process to create flexible 2D superlattices of nanoparticles, self-assembled into discrete and long-range ordered clusters. The process is readily scalable and grants access to mechano-responsive nanostructures on square centimeter areas. The elastic properties of the support allow for post-assembly tailoring of the lattice periodicity. The corresponding change in collective lattice coupling results in a gradual shift of the extinction maximum upon mechanical strain. Our results give a proof-of-principle for tunable plasmonics by mechano-responsive nanostructures., This work was supported by the Spanish Ministry of Economy, Industry and Competitiveness under the Maria de Maeztu Units of Excellence Programme - MDM-2016-0618 and by the Basque Government in the Elkartek program 2018/19. C.K. acknowledges funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 799393 (NANOBIOME)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Understanding the origin of Charge Density Waves from First-Principles: clearing misconceptions and explaining real materials

  • Ordejón, Pablo
  • Guster, Bogdan
  • Pruneda, Miguel
  • Pouget, Jean-Paul
  • Canadell, Enric
Resumen del trabajo presentado a la 20th Edition of Trends in Nanotechnology International Conference (TNT), celebrada en San Sebastian (España) del 30 de septiembre al 4 de octubre de 2019., This work was supported by Spanish MICIU, AEI and EU FEDER (Grant No. PGC2018-096955-B-C4). ICN2 and ICMAB are supported by the Spanish MICIU and AEI Severo Ochoa Centers of Excellence Program (Grants No. SEV-2017-0706 and No. SEV-2015-0496), and ICN2 by Generalitat de Catalunya (CERCA Programme).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Cost Effective Laser Processing of Graphene Oxide, Transition Metal Oxides and Alginate Composite for Hybrid Electrodes for Supercapacitors

  • García Lebière, Pablo
  • Koutsogianni, Afroditi
  • Gispert, Joaquim
  • Minguillon, Miquel
  • Pérez del Pino, Ángel
  • Gyorgy, Eniko
The authors acknowledge the financial support of the Spanish Ministry of Economy and Competitiveness under the project ENE2017-89210-C2-1-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Fabrication of Reduced Graphene Oxide Supercapacitor Electrodes Through Easily-scalable Laser-method

  • García Lebière, Pablo
  • Ponsa, Nil
  • Pérez del Pino, Ángel
  • Gyorgy, Eniko
The authors acknowledge the financial support of the Spanish Ministry of Economy and Competitiveness under the projects ENE2017-89210-C2-1-R, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

High harmonic spectroscopy of quantum phases in a high-Tc superconductor

  • Alcalà, Jordi
  • Bhattacharya, Utso
  • Ciappina, Marcelo
  • Elu, Ugaitz
  • Graß, Tobias
  • Grochowski, Piotr T.
  • Lewenstein, Maciej
  • Palau, Anna
  • Sidiropoulos, Themistoklis P.H.
  • Steinle, Tobias
  • Tyulnev, Igor
  • Biegert, Jens
Ultrafast carrier dynamics are uniquely sensitive to the correlated interactions within quantum materials as well as their transition to different phases, like the emergence of superconductivity (SC) [1,2]., We thank V. Kunets from MMR Technologies and X. Menino at Institut de Ciencies Fotoniques for technical support and Dr. K. Dewhurst and Dr. S. Sharma for help with the ELK code. J.B., U.E., T.P.H.S., T.S., and I.T. acknowledge financial support from the European Research Council (ERC) for ERC Advanced Grant “TRANSFORMER” (grant 788218) and ERC Proof of Concept Grant “miniX” (grant 840010). J.B. and group acknowledge support from FET -OPEN “PETACom” (grant 829153), FET-OPEN “OPTOlogic” (grant 899794), EIC-2021-PATHFINDEROPEN “TwistedNano” (grant 101046424), Laserlab-Europe (grant 654148), Marie Sklodowska-Curie ITN “smart-X” (grant 860553), Plan Nacional PID-PID2020-112664GB-I00-210901, AGAUR for 2017 SGR 1639, “Severo Ochoa” (grant SEV-2015-0522), Fundació Cellex Barcelona, the CERCA Programme/Generalitat de Catalunya, and the Alexander von Humboldt Foundation for the Friedrich Wilhelm Bessel Prize. U.B., T.G., P.T.G., and M.L. acknowledge funding from the ERC for ERC Advanced Grant NOQIA; Agencia Estatal de Investigación (R&D project CEX2019-000910-S, funded by MCIN/AEI/10.13039/501100011033, Plan National FIDEUA PID2019-106901GB-I00, FPI, QUANTERA MAQS PCI2019-111828-2, Proyectos de I+D+I “Retos Colaboración” RTC2019-007196-7); Fundació Cellex; Fundació Mir-Puig; Generalitat de Catalunya through the CERCA program; AGAUR grant 2017 SGR 134; QuantumCAT U16-011424, cofunded by ERDF Operational Program of Catalonia grant 2014-2020; EU Horizon 2020 FET-OPEN OPTOLogic (grant 899794); National Science Centre, Poland (Symfonia grant 2016/20/W/ST4/00314); Marie Skłodowska-Curie grant STREDCH 101029393; “La Caixa” Junior Leaders fellowships (ID100010434); and EU Horizon 2020 under Marie Skłodowska-Curie grant agreement 847648 (LCF/BQ/PI19/11690013, LCF/BQ/PI20/11760031, LCF/BQ/PR20/11770012, and LCF/BQ/PR21/11840013). P.T.G. acknowledges the Polish National Science Center grants 2018/31/N/ST2/01429 and 2020/36/T/ST2/00065 and is supported by the Foundation for Polish Science. Center for Theoretical Physics of the Polish Academy of Sciences is a member of the National Laboratory of Atomic, Molecular and Optical Physics. A.P. and J.A. acknowledge support from the Spanish Ministry of Economy and Competitiveness through the “Severo Ochoa” Programme for Centres of Excellence in R&D (grant SEV-2015-0496), SuMaTe project (RTI2018-095853-B-C21) cofinanced by the European Regional Development Fund, and the Catalan Government grant 2017-SGR-1519. This work was supported by EU COST action NANOCOHYBRI CA16218. M.C. acknowledges financial support from the Guangdong Province Science and Technology Major Project (Future functional materials under extreme conditions - 2021B0301030005). We also acknowledge the Scientific Services at Institut de Ciència de Materials de Barcelona and ICN2., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed