Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Libro o Monografía (Book)

Fixed-point Processing for an IR Positioning System based on QADA Receivers

  • Moltó Orozco, David|||0000-0002-2790-3758
  • Hernández Alonso, Álvaro|||0000-0001-9308-8133
  • Aparicio Esteve, Elena|||0000-0001-7886-312X
  • Ureña Ureña, Jesús|||0000-0003-1408-6039
  • Pérez Rubio, María Del Carmen|||0000-0001-8271-6843
2022 IEEE 12th International Conference on Indoor Positioning and Indoor Navigation (IPIN), 5-8 September, 2022, Beijing, China., Indoor optical positioning systems have increased in popularity in recent years because they can provide centimeter accuracy in three dimensions (3D) utilizing light-emitting diodes (LEDs) and photoreceptors. This work presents the design of a positioning system, which is based on a set of four photoreceptors functioning as beacons at known places for a single LED to be positioned. However, it might be extended to additional emitters with some medium access control. The associated processing is explained, as well as the basic assumptions to be addressed when approaching its hardware implementation, such as the preliminary partitioning of tasks between hardware and software, and the fixed-point representation of the processing to be implemented in hardware. The system has been validated by simulation in a 2 × 2 × 3.4 m3 volume, yielding mean absolute errors around 0.004 m for the X and Y axes, and around 0.01 m for the Z-axis, as well as lower standard deviations than 0.004 m for the X and Y axes and 0.01 m for the Z-axis., Agencia Estatal de Investigación, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Libro o Monografía (Book)

Comparison of Neural Networks for High-Sampling Rate NILM Scenario

  • Diego Otón, Laura De|||0000-0002-4939-2987
  • Hernández Alonso, Álvaro|||0000-0001-9308-8133
  • Nieto Capuchino, Rubén|||0000-0002-8293-9665
  • Pérez Rubio, María Del Carmen|||0000-0001-8271-6843
2022 IEEE International Symposium on Medical Measurements and Applications (MeMeA), 22-24 June 2022, Messina, Italy., The common objective of techniques employed to identify the use of household appliances is related to energy efficiency and the reduction of energy consumption. In addition, through load monitoring it is possible to assess the degree of independence of tenants with minimal invasion of privacy and thus develop sustainable health systems capable of providing the required services remotely. Both approaches should initially deal with the load identification stage. For that purpose, this work presents three different solutions that take the events of the electrical current signal acquired at high frequency and process them for classification by using two different topologies of Artificial Neural Networks (ANN). The data of interest used as input for the ANN in the proposals are the normalized signal captured around the events, the images created by dividing that signal into sections and organizing them in a matrix, and the images coming from the Short Time Fourier Transform (STFT) of the signal around the event. The dataset BLUED is used to carry out the validation of the proposal, where some of the proposed architectures obtain an F1 score above 90% for more than fifteen devices under classification., Universidad de Alcalá, Agencia Estatal de Investigación
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Libro o Monografía (Book)

Estimating energy consumption in households for non-intrusive elderly monitoring

  • Hernández Alonso, Álvaro|||0000-0001-9308-8133
  • Diego Otón, Laura De|||0000-0002-4939-2987
  • Pizarro Pérez, Daniel|||0000-0003-0622-4884
  • Pérez Rubio, María Del Carmen|||0000-0001-8271-6843
  • Villadangos Carrizo, José Manuel|||0000-0001-5900-0978
  • Nieto Capuchino, Rubén|||0000-0002-8293-9665
2023 IEEE International Workshop on Metrology for Living Environment (MetroLivEnv), 29-31 May 2023, Milano, Italy., Population ageing is becoming a key social issue in recent decades, particularly in Western countries, where this fact, together with the increase of life expectancy, has posed a significant strain on public finances and health services. In this context, many technological developments are often proposed to promote and support the independent living of elderly at their own homes, thus avoiding or postponing possible entries into social residences. Among them, smart meters provide a nonintrusive way to monitor and estimate the tenants" daily activities, by only using a single-point measurement in the mains at the entrance of the household. This work describes a regression approach to estimate the energy consumption of a house by means of a LSTM neural network. For that purpose, a pilot has been run on a house during six months in order to collect the electrical data, which will be used later to train the neural network. After that training, the network tries to estimate the energy consumption every 15 minutes, so any deviation between the predicted sample and the measured one might be used to detect anomalies in the daily routine of the tenant., Agencia Estatal de Investigación, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Libro o Monografía (Book)

Dynamic Adjustment of Measurement Noise Covariance Matrix in an Infrared-based Positioning and Tracking System

  • Aparicio Esteve, Elena|||0000-0001-7886-312X
  • Moltó Orozco, David|||0000-0002-2790-3758
  • Ureña Ureña, Jesús|||0000-0003-1408-6039
  • Hernández Alonso, Álvaro|||0000-0001-9308-8133
  • Espinosa Zapata, Felipe|||0000-0003-1588-0947
2022 IEEE 12th International Conference on Indoor Positioning and Indoor Navigation (IPIN), 5-8 September, 2022, Beijing, China., The accuracy of optical positioning systems can be compromised by multiple factors (reflections, calibration, etc.). As an alternative to the triangulation, multilateration, or fingerprinting techniques typically used in these systems, stochastic estimation techniques can be used, such as Kalman Filters (KF) in its different variants. They estimate the receiver position based on the acquired measurements and the estimated positions in previous iterations. This work presents the evaluation of a 3D optical positioning system, based on four LED beacons and a quadrant receiver, using an Extended Kalman Filter (EKF). The implementation of a measurement noise covariance matrix that is adjusted depending on the angle and distance between transmitters and receiver, obtained in the previous iteration, is analysed. The receiver position estimation using both a dynamic and a static measurement noise covariance matrix is evaluated and compared with simulations and experimental tests. In simulations, the achieved errors are below 6 cm and 12 cm in 75% of the cases when using a dynamic and a static noise matrix, respectively. In the experimental tests, the obtained errors in 75% of the cases for the position in plane XY and the rotation angle ? are smaller than 7.44 cm and 1.06 ? with a dynamic noise matrix; and below 7.59 cm and 1.62 ? for a static one., Agencia Estatal de Investigación, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Libro o Monografía (Book)

Centralized optical 3D positioning system for emitting tags

  • Aparicio Esteve, Elena|||0000-0001-7886-312X
  • Ureña Ureña, Jesús|||0000-0003-1408-6039
  • Hernández Alonso, Álvaro|||0000-0001-9308-8133
  • Moltó Orozco, David|||0000-0002-2790-3758
  • Villadangos Carrizo, José Manuel|||0000-0001-5900-0978
  • Cubero Vacas, Miguel
13th International Conference on Indoor Positioning and Indoor Navigation (IPIN2023), 25-28 September 2023, Nuremberg, Germany., The demand for accurate and reliable local positioning systems has grown rapidly with the increasing use of Location-Based Services (LBS). Emerging technologies such as optical, RF, acoustic, mechanical, and magnetic are feasible options for indoor positioning. Optical-based systems have gained attention due to the widespread LED lamp availability and centimeter-level accuracy. In this context, this work presents the implementation and validation of a centralized optical Local Positioning System (LPS) based on a set of mobile emitter LEDs and a minimum of two fixed receivers, enabling simultaneous position of all tags in the infrastructure (centralized approach). The system is designed for long-distance measurements, using Visible or Infrared Light signals. By incorporating geometric considerations into a Non-Linear Least Squares Estimator (NLSE), the system can estimate the 3D position of a mobile object (i.e. person, drone). The comparison of different deployments demonstrates that the proposed system estimates the 3D position with less than 4mm of error in 90% of cases when using four non-aligned receivers and a single LED., Agencia Estatal de Investigación, Universidad de Alcalá, Junta de Comunidades de Castilla-La Mancha, European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Libro o Monografía (Book)

(A)esthetics of the everyday: environmental poetics in social architecture

  • Muñoz Carabias, Francisco Felipe|||0000-0001-5628-0548
Se propone una lectura crítica de la estética arquitectónica desde la intersección entre Lefebvre y su teoría de la producción del espacio, y la formulación de una (a)estética de lo común (ECO). Ante la crisis ecológica, la emergencia habitacional y el agotamiento de los modelos formales de belleza, se plantea una nueva sensibilidad que desplaza el foco del objeto icónico hacia el espacio compartido y vivido. La metodología combina un marco teórico basado en Lefebvre y la evolución de la estética cotidiana (Dewey, Mandoki, Saito, Leddy) con el análisis de casos de estudio en diversos contextos: en el centro, la UVA de Hortaleza en Madrid, referenciada junto a proyectos como Elemental en Chile y Bedre Billigere Boliger en Dinamarca. Los hallazgos muestran que la frugalidad y lo común pueden constituir nuevos fundamentos estéticos válidos para abordar las emergencias globales desde lo más local e inmediato., A critical reading of architectural aesthetics is proposed from the intersection between Lefebvre and his theory of the production of space, and the formulation of an (a)esthetics of the common (ECO). In the face of ecological crisis, housing emergency, and the exhaustion of formal models of beauty, a new sensitivity is proposed that shifts the focus from the iconic object to the shared and lived space. The methodology combines a theoretical framework based on Lefebvre and the evolution of everyday aesthetics (Dewey, Mandoki, Saito, Leddy) with the analysis of case studies in various contexts: at the center, the UVA of Hortaleza in Madrid, referenced alongside projects such as Elemental in Chile and Bedre Billigere Boliger in Denmark. The findings show that frugality and the common can constitute new valid aesthetic foundations to address global emergencies from the most local and immediate., Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Libro o Monografía (Book)

Evaluating Human Activity and Usage Patterns of Appliances with Smart Meters

  • Hernández Alonso, Álvaro|||0000-0001-9308-8133
  • Diego Otón, Laura De|||0000-0002-4939-2987
  • Villadangos Carrizo, José Manuel|||0000-0001-5900-0978
  • Pérez Rubio, María Del Carmen|||0000-0001-8271-6843
  • Pizarro Pérez, Daniel|||0000-0003-0622-4884
  • Nieto Capuchino, Rubén|||0000-0002-8293-9665
  • Bahíllo Martínez, Alfonso
2022 IEEE International Symposium on Medical Measurements and Applications (MeMeA), 22-24 June 2022, Messina, Italy., Population ageing is becoming a key issue for most western countries, due to the challenges that it poses to the sustainability of future healthcare systems. In this context, many proposals and development are emerging trying to enhance the independent living of elderly and cognitive impaired people at their own homes. For that purpose, the massive deployment of smart meter at houses and buildings, initially focused on improving the energy management, has become a useful tool to provide the society with a variety of services and applications that can be employed for independent living. This work proposes the use of a commercial smart meter that delivers the disaggregated consumption per appliance every hour. This device has been installed on a test house during a training period of two months, in order to infer the behavior routines in the usage of the microwave. After the training, every new day can be compared to the obtained usage pattern of that appliance, in order to launch a notification when the day routine significantly differs. Similarly, since the use of the microwave is related to cooking, activities such as breakfast, lunch or dinner, may also be monitored and/or compared to a trained pattern. The proposal has been validated preliminary with experimental data coming from the aforementioned household., Agencia Estatal de Investigación, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Libro o Monografía (Book)

High-rate acquisition system for an infrared LPS

  • Cubero Vacas, Miguel
  • Moltó Orozco, David|||0000-0002-2790-3758
  • Aparicio Esteve, Elena|||0000-0001-7886-312X
  • Hernández Alonso, Álvaro|||0000-0001-9308-8133
  • Villadangos Carrizo, José Manuel|||0000-0001-5900-0978
  • Ureña Ureña, Jesús|||0000-0003-1408-6039
2023 38th Conference on Design of Circuits and Integrated Systems (DCIS), 15-17 November 2023, Málaga, Spain., In the last years, the demand for positioning systems based on visible light, infrared light or, in general, optical signals has increased considerably due to their high accuracy and low cost compared to positioning systems based on other technologies, as well as their ease of integration due to their wide presence in domestic and industrial environments. The main constraint of these solutions is that the high speed of light makes the acquisition process complex. This work proposes a complete acquisition architecture for the twelve signals coming from four QADA (Quadrature Angular Diversity Aperture) photoreceptors, based on an analog front-end for signal conditioning at the input, an analog-to-digital converter, and a final digital stage using an FPGA for the acquisition of the data coming from the converter with high data rates up to 16.25 Msps. To verify the system performance, LS (Loosely Synchronized) sequences, often used in positioning systems, are emitted by a LED, and, later, they are acquired and digitally processed successfully by the proposed architecture in some preliminary experimental tests., Agencia Estatal de Investigación, Universidad de Alcalá, Junta de Comunidades de Castilla-La Mancha, European Science Foundation
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Libro o Monografía (Book)

Adaptative and bioinspired materials: cement-based materials with self-modulating and self-sensing properties

  • Puentes Mojica, Javier Mauricio|||0000-0001-8748-7664
  • Palomar Herrero, Irene|||0000-0003-2743-3618
  • Barluenga Badiola, Gonzalo|||0000-0002-2996-3412
  • Guardia Martín, Cynthia|||0000-0003-4442-8933
The approach to sustainability in architecture can be considered as the reduction of the use of resources during the whole life of buildings. For cement-based materials, the strategy is focused on material optimization related to raw materials extraction, manufacturing process, lifespan and finally the possibility of reuse or recycling. This article shows the possibility of achieving the objective through novel and alternative ways where the interaction environment-material is the basis of this development for new cement-based materials. This adaptability results in materials with self-responsive properties: self-sensitive, self-healing, self-modulating and self-cleaning. In the present paper, two self responsive materials are shown. In the first case, material design is based on reducing energy consumption through energy efficiency, by accumulating heat in a dynamic environment. The second material investigates the self-sensitivity capacity that can diagnose and identify changes of mechanical properties that could compromise durability, saving maintenance resources. In both studies, the search for new properties is achieved using different additions that incorporate new capabilities to the cement-based materials. Phase change materials (PCM) were used as self-modulating materials in cement-lime mortar for thermal regulation, while micro and nano carbon-based fibers (CNF) were used in Self Compacting Concrete (SCC) to vary the electrical properties, turning the material into a real time sensor. These materials are presented as real alternatives in the search for dynamic materials applied to sustainable construction., Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Libro o Monografía (Book)

Tecnologías habilitantes para redes programables y definidas por software: un enfoque sobre control in-band

  • Rojas Sánchez, Elisa|||0000-0002-6385-2628
  • Carral Pelayo, Juan Antonio|||0000-0002-5545-9463
  • Martinez Yelmo, Isaias|||0000-0001-9648-8669
  • Arco Rodríguez, José Manuel|||0000-0001-7752-3561
  • López Pajares, Diego|||0000-0002-8959-4321
  • Álvarez Horcajo, Joaquín|||0000-0002-8522-9933
  • Carrascal Acebron, David|||0000-0002-6982-9365
XVI Jornadas de Ingeniería Telemática (JITEL 2023), Barcelona (España), 8-10 de noviembre de 2023., Esta comunicación se centra en la necesidad de profundizar en las tecnologías habilitantes para redes programables y definidas por software, con énfasis particular sobre el control denominado inband, muy poco explorado y con aun notables carencias de cara a los despliegues de red avanzados, como son las redes 5G y futuras 6G., Universidad de Alcalá, Agencia Estatal de Investigación