Pasar al contenido principal

HOLOGRAFIA PARA ENERGIA SOLAR, IMAGEN Y COMUNICACIONES

FIS2017-82919-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ALICANTE

Resultados relacionados

Resultados totales (Incluyendo duplicados): 56
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Homography estimation from a single-point correspondence using template matching and particle swarm optimization

  • Diaz-Ramirez, Victor H.
  • Juarez-Salazar, Rigoberto
  • Zheng, Juan
  • Hernandez-Beltran, Jose Enrique
  • Márquez, Andrés
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
Existing feature-based methods for homography estimation require several point correspondences in two images of a planar scene captured from different perspectives. These methods are sensitive to outliers, and their effectiveness depends strongly on the number and accuracy of the specified points. This work presents an iterative method for homography estimation that requires only a single-point correspondence. The homography parameters are estimated by solving a search problem using particle swarm optimization, by maximizing a match score between a projective transformed fragment of the input image using the estimated homography and a matched filter constructed from the reference image, while minimizing the reprojection error. The proposed method can estimate accurately a homography from a single-point correspondence, in contrast to existing methods, which require at least four points. The effectiveness of the proposed method is tested and discussed in terms of objective measures by processing several synthetic and experimental projective transformed images.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Holography: 50th anniversary of Dennis Gabor’s Nobel Prize: Part II. An engineering perspective

  • Sheridan, John T.
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
The holographic principle, discovered by Gabor, and realized by Leith & Upatnieks and Denisyuk is discussed. The intrinsic value of this idea and its continuing ability to motivate and inspire engineers and applied physicists is reviewed.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Adulterant Detection in Peppermint Oil by Means of Holographic Photopolymers Based on Composite Materials with Liquid Crystal

  • Miloua, Wafaa
  • Ortuño, Manuel
  • Navarro-Fuster, Víctor
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Navarro-Fuster, Víctor|||/items/b148fcc2-81b7-4996-b2b9-a644f9797703
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Diffraction gratings are recorded in a holographic photopolymer containing nematic liquid crystal and peppermint oil. The presence of the oil modifies the polymerization and the holographic response. The composite containing oil adulterated with triethyl citrate obtains a diffraction efficiency related to the oil’s purity. The results obtained suggest the possibility of developing a holographic chemical analysis method for quality control of raw materials.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Caracterización de lentes holográficas registradas en un fotopolímero compatible con el medio ambiente, Characterization of registered holographic lenses in a photopolymer compatible with the environment

  • Lloret, Tomás
  • Navarro-Fuster, Víctor
  • Ramirez, Manuel G.
  • Neipp, Cristian
  • Ortuño, Manuel
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Lloret, Tomás|||/items/21981029-b54d-44b2-87a1-a134245d1805
  • Navarro-Fuster, Víctor|||/items/b148fcc2-81b7-4996-b2b9-a644f9797703
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
En este trabajo se presenta un dispositivo para obtener lentes holográficas (LH) en un fotopolímero compatible medioambientalmente sensibilizado a la longitud de onda de 488 nm. Utilizando este dispositivo se han obtenido LH's, reconstruidas con dos láseres 473 nm y 633 nm), de la misma focal y diámetro, con montajes experimentales simétricos y asimétricos, y positivas y negativas. La calidad de imagen de dichas lentes se ha evaluado: experimentalmente; a partir del cálculo de la MTF y las aberraciones obtenidas capturando con un sensor CCD la imagen del foco (PSF), y teóricamente; mediante software. También se propone un método para mejorar la calidad de imagen de las LH's que tienen más aberraciones.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Holographic waveguides in photopolymers

  • Fernandez, Roberto
  • Bleda, Sergio
  • Gallego, Sergi
  • Neipp, Cristian
  • Márquez, Andrés
  • Tomita, Yasuo
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Bleda, Sergio|||/items/d2b99c60-360f-4a4f-a712-934a01eea569
  • Fernandez, Roberto|||/items/ca9b5808-d6e3-44da-a2b8-6ace83cf0a56
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
The possibilities that offer the holographic optical elements for photovoltaic and “see through display” applications open new windows for holographic recording materials. In this sense, some specific characteristics are required for each particular application. Waveguides are one of the key elements for these applications. Photopolymers are one of the most competitive candidates for waveguide fabrication. In this work, we evaluate the performance of one example from each of three families of photopolymer material in fabrication of a 633nm waveguide. Firstly, polyvinyl alcohol acrylamide, PVA/AA, the second one, a nanoparticle-thiol-ene, NPC, and on the last place a penta/hexa-acrylate based polymer with dispersed nematic liquid crystal molecules, PDLC. We study the critical role of the material and in particular, spatial resolution for this application.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

LED-Cured Reflection Gratings Stored in an Acrylate-Based Photopolymer

  • Ramirez, Manuel G.
  • Sirvent, Daniel
  • Morales-Vidal, Marta
  • Ortuño, Manuel
  • Martínez Guardiola, Francisco Javier
  • Francés, Jorge
  • Pascual, Inmaculada
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
The storage of volume holographic reflection gratings in low-toxicity photopolymers represents a challenge at present since they can be used in many important applications such as biosensors and holographic optical elements. In this context, an acrylate-based photopolymer developed in our research group was employed to study the recording of unslanted holographic reflection gratings at high spatial frequencies. The optimal preparation conditions of the photopolymer layers were determinated. The diffraction efficiencies are measured in both recording and curing stage and a comparative study of these values was realized. In addition, a theoretical study using Kogelnik’s coupled wave theory was carried out with the aim of understanding the diffraction efficiency behaviour of both processes. In this work, a maximum diffraction efficiency of 14.1% was reached after a curing process in 150 µm layers at a recording wavelength of 488 nm. This value represents a good result compared to that reported in the literature and opens the way to reflection mode holography research using low-toxicity material.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Celebrating holography anniversaries: a historical perspective

  • Beléndez, Augusto
  • Sheridan, John T.
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
The year 2022 marks the 75th anniversary of Dennis Gabor’s invention of the holographic method, what he called “microscopy by reconstructed wave-fronts”, as well as the 60th anniversary of the publication in 1962 of two seminal papers in the field of holography: the introduction of the reflection hologram by Yuri Denisyuk, and the description of the holographic process from the point of view of communication theory by Emmett Leith and Juris Upatnieks. Within the framework of these celebrations, a historical review of the origins of holography is presented with special emphasis on the contributions of Gabor, Denisyuk and Leith to the development of holography.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Phase-Shift Optimization in AA/PVA Photopolymers by High-Frequency Pulsed Laser

  • Puerto, Daniel
  • Gallego, Sergi
  • Francés, Jorge
  • Márquez, Andrés
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Photopolymers can be used to fabricate different holographic optical elements, although maximization of the phase-shift in photopolymers has been a challenge for the last few decades. Different material compositions and irradiation conditions have been studied in order to achieve it. One of the main conclusions has been that with continuous laser exposure better results are achieved. However, our results show for the first time that higher phase-shift can be achieved using a pulsed laser. The study has been conducted with crosslinked acrylamide-based photopolymers exposed with a pulsed laser (532 nm). The increment of the phase-shift between the pulsed laser and continuous laser exposure is 17%, achieving a maximum phase-shift of 3π radians and a refractive index shift of 0.0084 at the zero spatial frequency limit, where monomer diffusion does not take place. This allows this photopolymer to be used in large-scale manufacturing.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Caracterización del efecto Anamórfico en un Sistema de Almacenamiento Holográfico de información

  • Martínez Guardiola, Francisco Javier
  • Márquez, Andrés
  • Calzado Estepa, Eva María
  • Bleda, Sergio
  • Francés, Jorge
  • Pascual, Inmaculada
  • Gallego, Sergi
  • Bleda, Sergio|||/items/d2b99c60-360f-4a4f-a712-934a01eea569
  • Calzado Estepa, Eva María|||/items/5716b8f6-2afe-4da1-9308-a19d8791b41d
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
Presentamos un método de caracterización de un sistema óptico de almacenamiento holográfico. Este sistema utiliza un LCoS de alineación paralela como modulador. Dado que estos PA-LCoS presentan efectos anamór cos queremos medir hasta qué punto estos efectos afectan en el almacenamiento de información. Para esto se estudiará la contribución de los distintos efectos de degradación en el Bit Error Rate obtenido.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Analytical modeling of blazed gratings on two-dimensional pixelated liquid crystal on silicon devices

  • Márquez, Andrés
  • Martínez Guardiola, Francisco Javier
  • Francés, Jorge
  • Neipp, Cristian
  • Ramirez, Manuel G.
  • Calzado Estepa, Eva María
  • Morales-Vidal, Marta
  • Gallego, Sergi
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Calzado Estepa, Eva María|||/items/5716b8f6-2afe-4da1-9308-a19d8791b41d
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Phase spatial light modulators and, in particular, parallel-aligned liquid crystal on silicon (PA-LCoS) microdisplays are widely used to display programmable diffractive optical elements (DOEs). These are pixelated elements with inherent different characteristics when compared with DOEs produced with micro-optics fabrication techniques. Specifically, programmable DOEs may be affected by the fill factor, time-flicker, fringing-field and interpixel cross talk effects, and limited and quantized modulation depth of the LCoS device. Among the multilevel DOEs, we focus on the important case of the blazed gratings. We develop the corresponding analytical expressions for the diffracted field where, as novelties of this work, fill factor and flicker are introduced together with phase depth and the number of quantization levels. Different experimental-based normalizations are considered, which may lead to wrong conclusions if the fill factor is not considered in the expressions. We also analyze the differences arising between one- and two-dimensional pixelated devices. When compared with numerical procedures, our approach provides an analytical expression that facilitates the design, prediction, and discussion of experiments. As an application, we prove, for the limiting case of no interpixel cross talk, that multiorder DOEs cannot be more efficient than the equivalent single-order DOE. We also show how the results for DOEs with a unit fill factor can be adapted to DOEs with a fill factor smaller than one with a very efficient procedure.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Precise-Integration Time-Domain Formulation for Optical Periodic Media

  • Sirvent-Verdú, Joan Josep
  • Francés, Jorge
  • Márquez, Andrés
  • Neipp, Cristian
  • Alvarez, Mariela L.
  • Puerto, Daniel
  • Gallego, Sergi
  • Pascual, Inmaculada
  • Alvarez, Mariela L.|||/items/0ea731c9-dfb8-49b3-8945-0f6bcb818068
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Sirvent-Verdú, Joan Josep|||/items/b0bc0991-d9a5-4f58-a8d1-6c27710afdbc
A numerical formulation based on the precise-integration time-domain (PITD) method for simulating periodic media is extended for overcoming the Courant-Friedrich-Levy (CFL) limit on the time-step size in a finite-difference time-domain (FDTD) simulation. In this new method, the periodic boundary conditions are implemented, permitting the simulation of a wide range of periodic optical media, i.e., gratings, or thin-film filters. Furthermore, the complete tensorial derivation for the permittivity also allows simulating anisotropic periodic media. Numerical results demonstrate that PITD is reliable and even considering anisotropic media can be competitive compared to traditional FDTD solutions. Furthermore, the maximum allowable time-step size has been demonstrated to be much larger than that of the CFL limit of the FDTD method, being a valuable tool in cases in which the steady-state requires a large number of time-steps.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Reflection holograms stored in an environment-friendly photopolymer

  • Ramirez, Manuel G.
  • Sirvent, Daniel
  • Ortuño, Manuel
  • Navarro-Fuster, Víctor
  • Martínez Guardiola, Francisco Javier
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Navarro-Fuster, Víctor|||/items/b148fcc2-81b7-4996-b2b9-a644f9797703
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
In recent years, the development of low-toxicity photopolymers for holographic recording in reflection mode has reached great importance. One of the main advantages of reflection holograms is that they can be reconstructed using white light, which has enabled that many researches have focused on the development of sensors for different types of analytes. Optical data storage and three-dimensional multiplexing of reflection holograms to improve the data storage density have also been investigated through reflection holograms. However, the photopolymers used in these researches have certain undesirable features such as the toxicity of some of their components and non-environmentally compatibility. The common used hydrophilic photopolymers content poly(vinyl alcohol) (PVA) or gelatine binder and monomers related to acrylamide. This compound has a high potential to cause cancer. For this reason, we developed a photopolymer called “Biophotopol” as a recording holographic material for optical applications. “Biophotopol” have a low toxicity, good recycling properties and is environmental-friendly. The basic formulation of “Biophotopol” includes an initiator system which is a free radical generator composed by triethanolamine as co-initiator and plasticizer and sodium salt 5’- 72 riboflavin monophosphate as sensitizer dye, sodium acrylate as polymerizable monomer and PVA as inert binder polymer. Additionally, a cross-linking agent, as N,N’-(1,2-dihydroxyethylene)bisacrylamide (DHEBA) , can also be added. Volume transmission gratins and holographic lens have been fabricated in this photopolymer but not researches have been done to store reflection gratins. Is know that for higher spatial frequencies, the diffraction efficiency decreases considerably as the spatial frequency increases. In this sense, the general aim of this work has been fabricated reflection gratings in the symmetrical experimental setup in “Biophotopol” and to study the dependence of diffraction efficiency on physical thickness, recording intensity and exposure energy. First, films physical thickness was investigated. The maximum diffraction efficiency was obtained for thicknesses around 145 µm. The photopolymer layers uniformity was highly sensitive to drying and environmental conditions during the exposure stage. Therefore, both conditions were investigated and very controlled. An increase in diffraction efficiency was observed when the photopolymer films were cured with a LED lamp to improve the stability of the reflection holograms. The residual dye is eliminated during this process. The maximums diffraction efficiencies around 30 % were obtained for reflection gratings with a spatial frequency of 4738 lines/mm. The index modulation and optical thickness were obtained by fitting procedure through coupled wave theory. Experimental and theoretical results have been interpreted to modify the photopolymer formulation and exposure conditions in order to increase the diffraction efficiencies.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Validation of Fresnel–Kirchhoff Integral Method for the Study of Volume Dielectric Bodies

  • Taleb, Soumia Imane
  • Neipp, Cristian
  • Francés, Jorge
  • Márquez, Andrés
  • Alvarez, Mariela L.
  • Hernández Prados, Antonio
  • Gallego, Sergi
  • Beléndez, Augusto
  • Alvarez, Mariela L.|||/items/0ea731c9-dfb8-49b3-8945-0f6bcb818068
  • Beléndez, Augusto
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Hernández Prados, Antonio|||/items/f105e529-b94b-4ab0-848c-cf654d19a6ba
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
In this work, we test a nondestructive optical method based on the Fresnel–Kirchhoff integral, which could be applied to different fields of engineering, such as detection of small cracks in structures, determination of dimensions for small components, analysis of composition of materials, etc. The basic idea is to apply the Fresnel–Kirchhoff integral method to the study of the properties of small-volume dielectric objects. In this work, we study the validity of this method. To do this, the results obtained by using this technique were compared to those obtained by rigorously solving the Helmholtz equation for a dielectric cylinder of circular cross-section. As an example of the precision of the method, the Fresnel–Kirchhoff integral method was applied to obtain the refractive index of a hair by fitting the theoretical curve to the experimental results of the diffraction pattern of the hair measured with a CCD camera. In a same manner, the method also was applied to obtain the dimensions of a crack artificially created in a piece of plastic.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Polarimetric analysis of cross-talk phenomena induced by the pixelation in PA-LCoS devices

  • Francés, Jorge
  • Márquez, Andrés
  • Neipp, Cristian
  • Puerto, Daniel
  • Gallego, Sergi
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Liquid crystal on silicon (LCoS) microdisplays are an element commonly found in advanced photonic applications. Phase-only modulation and spatial light modulators (SLMs) use parallel-aligned LCoS (PA-LCoS) microdisplays due to their large resolution and small pixel size. However, the crosstalk between neighbouring pixels induces several phenomena, i.e. the smoothing of the electric field in the interpixel region known as fringing fields, out-of-plane reorientation of the liquid crystal director, and diffraction effects due to the finite pixel grid pattern. These effects degrade the performance in SLM applications. Therefore, a rigorous numerical analysis is carried out based on a full 3D model that estimates the LC director distribution of the PA-LCoS microdisplay through uniform applied voltages. Once the LC director distribution is known, a numerical finite-difference scheme simulates light propagation across the structure. Here, the impact of crosstalk is analysed from the polarimetric point of view for different pixel and interpixel sizes. It has been found that the finite-patterned pixel scheme induces the phenomena previously addressed, degrading the responses of the Stokes vector components S0, and S1 and also the degree of polarization (DOP). Furthermore, the impact over these parameters is generally inversely proportional to the fill factor. To isolate the influence of diffraction, out-of-plane, and fringing fields effects is challenging since all phenomena are mixed in both time and space, however we have found some useful trends.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Fresnel-Kirchhoff Integral Method Comparison with Scattering Theory for the Study of Volume Dielectric Bodies

  • Taleb, I.
  • Neipp, Cristian
  • Martínez Guardiola, Francisco Javier
  • Alvarez, Mariela L.
  • Calzado Estepa, Eva María
  • Márquez, Andrés
  • Francés, Jorge
  • Gallego, Sergi
  • Beléndez, Augusto
  • Alvarez, Mariela L.|||/items/0ea731c9-dfb8-49b3-8945-0f6bcb818068
  • Beléndez, Augusto
  • Calzado Estepa, Eva María|||/items/5716b8f6-2afe-4da1-9308-a19d8791b41d
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
In this work the accuracy of Fresnel-Kirchhoff integral method for the calculation of the refractive index of volume dielectric objects will be studied. To do this the results obtained by using this technique will be compared to those obtained by rigorously solving Helmholtz equation for a dielectric cylinder of circular cross section. Finally the Fresnel-Kirchhoff integral method will be applied to obtain the refractive index of a hair by fitting the experimental results of the diffraction pattern of the hair measured on a CCD camera to the theoretical curve.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Combining average molecular tilt and flicker for management of depolarized light in parallel-aligned liquid crystal devices for broadband and wide-angle illumination

  • Márquez, Andrés
  • Martínez Guardiola, Francisco Javier
  • Francés, Jorge
  • Gallego, Sergi
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
We demonstrate a complete semiphysical and analytical model describing the angular and wavelength dependencies not only of retardance, but also its flicker, in parallel aligned liquid crystal (PA-LC) devices. It relies on the fitting of the molecules’ equivalent tilt angle as a function of applied voltage. The wide range of calculations it offers without requiring extensive characterization makes the model unique. We focus on PA-LCoS application as a polarization state generator across the visible spectrum and for a wide range of incidence angles. This approach offers novel capabilities for managing arbitrary states of both full and partial polarization. To highlight the richness of situations with PA-LCoS devices, we provide results for two different digital addressing sequences producing different levels of flicker.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Numerical modeling of H-PDLC devices for diffractive optical elements with variable properties

  • Frencés, Jorge
Holographic polymer dispersed liquid crystal devices (H-PDLC) are involved in many applications, e.g. diffraction lenses, optical data storage, and image capture devices. H-PDLC is based on a light-sensitive monomer and liquid crystal (LC) mixture exposed to an interference pattern. The monomer concentration rises in the illuminated area, whereas in the dark zones, the LC is concentrated, setting up LC droplets of fewer nanometers. Accurate knowledge of the elastic behaviour of the LC director distribution and the influence of the boundaries with the polymer matrix can help to optimise the diffraction efficiency or the angular selectivity of these devices, keeping the driving voltage low. Here, a review of the latest analysis for accurately estimating the director distribution in LC-based devices is shown. This analysis is carried on in three steps. Firstly, an accurate model based on creating a considerably high number of droplets surrounding the polymer matrix fringes is performed. In this step, the user can modify the ratio between the areas filled with LC and polymer and the size and aspect ratio of the droplets. This packing step can be very demanding depending on the thickness of the grating and the domain dimensions considered for the analysis (2D or 3D). Secondly, a formulation based on estimating the director distribution is performed to derive the permittivity tensor from the LC director. Thirdly and last, from the information obtained in the previous step, a Finite-Difference Time-Domain simulation is performed to estimate the electromagnetic field distribution inside the domain considered accurately. The diffraction efficiencies and many indirect parameters can be computed from this rigorous analysis.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Influence of the introduction of peppermint oil as additive in the composition of HPDLC photopolymer and holographic response obtained

  • Miloua, Wafaa
  • Ortuño, Manuel
  • Morales-Vidal, Marta
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Holography is an optical technique that allows the recording and the reconstruction of the wave front of an object; and it permits us to obtain the three dimensional images of a material. The use of photopolymers is justified by their properties such as the higher diffraction efficiency with an acceptable energetic sensitivity, and other special characteristic, which are added just by adding liquid crystal, like the capacity of variation of the electro optical properties by means of an electric field. In this article, attempt has been made to see the influence of the introduction of peppermint oil as additive in the composition of HPDLC to see the different holographic responses. Volume diffraction gratings are recorded in two samples of HPDLC with and without peppermint oil respectively using a Nd:YAG laser tuned at 532 nm. Peppermint oil is used in this study since it.s a naturel oil with specified properties that are compatible with the HPDLC photopolymer. The proprieties related to viscosity, density color and solubility are similar to those of the stander components of the photopolymer Since it is very important to develop material with ecofriendly properties, the use of natural components in these materials can improve properties related to environment as peppermint oil has the similar properties as the other components, and also It can be a good concurrent to replace some of the components to have a more ecofriendly photopolymer Peppermint oil is soluble in the photopolymer. When the oil is added to the composition, the diffraction efficiency is decreased. This could be related to the polymerization or the PIPS process.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Efecto de la codificación en el número de errores introducidos en un HDSS, Codification effect in the error number introduced in a HDSS

  • Martínez Guardiola, Francisco Javier
  • Márquez, Andrés
  • Calzado Estepa, Eva María
  • Gallego, Sergi
  • Puerto, Daniel
  • Morales-Vidal, Marta
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Calzado Estepa, Eva María|||/items/5716b8f6-2afe-4da1-9308-a19d8791b41d
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
En este trabajo se presentan resultados preliminares sobre el efecto de la codificación de los datos digitales introducidos en un sistema de almacenamiento holográfico de información. Para ello se introducen una serie de fuentes de ruido que afectan a las imágenes que usamos como entrada de datos. Estas fuentes de ruido son las que se observan principalmente en el montaje real, por lo que se trata de imitar la degradación del sistema para poder tener un modelo que nos ayude a identificar los parámetros más disruptivos en el tratamiento óptico de la señal y cómo influye la introducción de una codificación en dicha imagen.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Holographic Characteristics of Photopolymers Containing Different Mixtures of Nematic Liquid Crystals

  • Fenoll Gambín, Sandra
  • Brocal, Francisco
  • Segura, José David
  • Ortuño, Manuel
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Brocal, Francisco|||/items/1b681560-35ff-451f-86e5-df4fbf4570d8
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
A holographic polymer dispersed liquid crystal (HPDLC) is used to record holographic diffraction gratings. Several mixtures of nematic liquid crystals (LC) are used as components of the HPDLC to evaluate their influence in static and dynamic basic properties. The diffraction efficiency obtained in the reconstruction of the holograms is evaluated to compare the influence of the different LC. Additionally, the samples are exposed to a variable electric field and the diffracted light intensity as a function of the applied voltage is measured to evaluate the influence of the LC. The results obtained show significant differences depending on the LC incorporated to the photopolymer.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Estimation of the speed of sound waves using a modular 3D printed Helmholtz resonator

  • Francés, Jorge
  • Navarro-Fuster, Víctor
  • Marini, Stephan
  • Bleda, Sergio
  • Calzado Estepa, Eva María
  • Puerto, Daniel
  • Gallego, Sergi
  • Bleda, Sergio|||/items/d2b99c60-360f-4a4f-a712-934a01eea569
  • Calzado Estepa, Eva María|||/items/5716b8f6-2afe-4da1-9308-a19d8791b41d
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Marini, Stephan|||/items/f9c8c8d4-d768-49bf-aae8-bb53041bd8b4
  • Navarro-Fuster, Víctor|||/items/b148fcc2-81b7-4996-b2b9-a644f9797703
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
This work shows the redesign of an elemental experience based on the Helmholtz resonator using 3D printing. A Helmholtz resonator is based on a volume and at least one opening that can include a tube or not. The air column inside the tube can be considered the mass of the system, whereas the volume represents the system's stiffness. Due to these analogies between acoustics and mechanics, the Helmholtz resonator is an interesting example of a harmonic oscillator. The relevance of harmonic motions is well known, and this topic is present in the syllabus of many technical and scientific education degrees. In this work, a bottle has been designed and fabricated using 3D printer technology. The design aimed to create a Helmholtz resonator with a variable frequency of resonance. Different mouthpieces have also been designed. The bottle is composed of a set of cylindrical sections that can be attached, enlarging the length of the container. For ensuring that the different parts set a tight enclosure, an O-ring seal has also been designed and fabricated. As more rings and O-seal junctions are attached, the volume of the resonator grows. By blowing the mouth of the Helmholtz resonator with different sections, different resonance frequencies can be measured. From these measurements, several parameters can be estimated indirectly, such as the speed of sound waves, the room temperature, and air density. 3D printing permits to analyse several scenarios without using uncomfortablestrategies to vary the bottle's volume, such as water, reducing the hazard in a laboratory with electronic instrumentation.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Bending in the holograms stored in hydrogel matrices

  • Berramdane, Kheloud
  • Ramirez, Manuel G.
  • Lucío, María Isabel
  • Zezza, Paola
  • Bañuls, María-José
  • Maquieira, Ángel
  • Morales-Vidal, Marta
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
The study of the optical properties and behaviour of holograms stored in hydrogel matrices when the material is immersed in liquid medium represent a very important challenge currently. Hydrogels are 3D polymer networks capable of undergoing reversible volume changes. These hydrogels can be chemically modified to obtain materials with different properties such as to be sensitive to a range of relevant analytes. Emergent applications require that the holograms stored in hydrogels be time-stable in a liquid medium. One of the most important applications of this type of system are holographic sensors. Holographic sensors have advantages over other types of sensors such as the possibility of miniaturization due to the use of holographic techniques, the ability to produce three-dimensional images, real-time quantification, possibility of low-cost mass manufacturing and label-free analyte- responsive. Due to these advantages, these sensors have great potential to be used in different areas such as environmental detection, veterinary testing, pharmaceutical bioassays and medical diagnosis. Therefore, the optical behaviour of the holograms and the optimization of the hydrogel’s matrices must be well studied. When volume phase holograms are stored in hydrogels matrices in liquid medium, the holographic planes can undergo a bending process that give rise to asymmetries in the lateral lobes around the Bragg angle. This bending affect to the diffraction efficiency, wavelength of maximum diffraction efficiency and the angular sensibility. These parameters are used as signal transducers in holographic sensors in transmission mode. The general aim of this work has been study the bending that is produced in the holographic planes when unslanted transmission volume phase holographic grating with a frequency of 1200 lines/mm have been stored in hydrogel matrices based on acrylamide (AA) and N,N'-methylenebisacrylamide (MBA) using different solvents (dimethyl sulfoxide, water and buffer solution) during the manufacturing process. Considering previous works on bending, and grating attenuated hologram.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Holographic Lenses in an Environment-Friendly Photopolymer

  • Lloret, Tomás
  • Navarro-Fuster, Víctor
  • Ramirez, Manuel G.
  • Ortuño, Manuel
  • Neipp, Cristian
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Lloret, Tomás|||/items/21981029-b54d-44b2-87a1-a134245d1805
  • Navarro-Fuster, Víctor|||/items/b148fcc2-81b7-4996-b2b9-a644f9797703
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
In this paper, we theoretically and experimentally evaluated the quality of volume phase transmission lenses stored in an environmentally friendly photopolymer. Holographic lenses (HLs) were obtained using symmetrical and asymmetrical experimental setups with the same positive and negative focal length and pupil diameter. The image quality was evaluated from the calculation of the modulation transfer function (MTF) by capturing the point spread function (PSF) with a charge-coupled device (CCD). A maximum frequency of 14 L/mm, reaching an MTF value of 0.1, was obtained for a negative asymmetrically recorded HL, evaluated at 473 nm wavelength. A theoretical study of aberrations was carried out to qualitatively evaluate the experimental results obtained.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Voltage dependence of retardance, flicker, and director angle orientation in reflective liquid crystal devices by average Stokes polarimetry

  • Márquez, Andrés
  • Martínez Guardiola, Francisco Javier
  • Morales-Vidal, Marta
  • Puerto, Daniel
  • Francés, Jorge
  • Gallego, Sergi
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Parallel-aligned liquid crystal on silicon devices (PA-LCoS) can be found nowadays in most of the advanced areas in optics and photonics. Many works have been dedicated to their characterization for optimum utilization in applications. However, usual techniques are based on diffractive or interferometric measurements. Recently, we proposed the use of Stokes polarimetry for a versatile yet easy to implement characterization. We show that the LCoS can modelled as a nonabsorbent reciprocal device which, combined with time-average Stokes polarimetry, enables to demonstrate robust measurements across the whole applied voltage range for the retardance and its flicker. One of the main novelties is that we also obtain the director orientation, which we show that changes across the voltage range, especially at larger applied voltages. This might affect in very sensitive applications. It might also provide a deeper insight into the internal dynamics in the LC layer.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Comment on “Application of Fresnel diffraction to nondestructive measurement of the refractive index of optical fibers”

  • Taleb, Soumia Imane
  • Neipp, Cristian
  • Francés, Jorge
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
We examine the validity of Eq. (5) in [A. Sabatyan and M. T. Tavassoly, “Application of Fresnel diffraction to nondestructive measurement of the refractive index of optical fibers,” Opt. Eng., 2007, Vol. 46(12), pp. 128001-1–128001-7] to describe the diffraction pattern of an optical fiber. We show that Eq. (5) must be changed to account for the phase introduced by the fiber correctly. In particular, we show that, to agree with the implicit criterion for representing traveling waves, given when using the Fresnel–Kirchoff integral [Eq. (4)], the phase introduced by the object must be carried by positive exponentials. The results obtained correcting Eq. (5) are compared with those obtained by the rigorous solution of Maxwell equations in the optical fiber. We demonstrate the importance of adequately taking into account the criterion implicitly assumed in the Fresnel–Kirchoff integral to represent traveling waves.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Anamorphic characterization of a PA-LCoS based holographic data storage system

  • Martínez Guardiola, Francisco Javier
  • Márquez, Andrés
  • Calzado Estepa, Eva María
  • Fernandez, Roberto
  • Neipp, Cristian
  • Ortuño, Manuel
  • Pascual, Inmaculada
  • Gallego, Sergi
  • Calzado Estepa, Eva María|||/items/5716b8f6-2afe-4da1-9308-a19d8791b41d
  • Fernandez, Roberto|||/items/ca9b5808-d6e3-44da-a2b8-6ace83cf0a56
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
We have included a Parallel Aligned Liquid Crystal on Silicon (PA-LCoS) microdisplay in a Holographic Data Storage System (HDSS). This novel display, widely accepted as Spatial Light Modulator (SLM), presents some advantages and disadvantages. One of these disadvantages is the anamorphic and frequency dependent effect. In this work we want to test this effect and see its effects in the complete optical process involved in the HDSS. We will use stripe-based patterns with different orientation (vertical and horizontal). To check the limits, we will increase the data density by decreasing the minimum stripe width. For evaluating the degradation suffered by the data page, we use the Bit Error Rate (BER) as figure of merit. We make a BER calculation from the statistical analysis of the histogram. In addition to the anamorphic effects we evaluate the degradation effects introduced by the non-uniformity in the illumination. To this goal we divide the image in several regions that are processed in the same way that the entire image. The error analysis of the entire optical system is useful for its calibration and fine adjustment. Once we have characterized the experimental setup we introduce the holographic material. Thus, by making the same analysis, we can evaluate the errors introduced by the material. As holographic material we use Polyvinyl Alcohol Acrylamide (PVA/AA), that has been characterized and developed in previous works by our group.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Tunable Waveguides Couplers Based on HPDLC for See-Through Applications

  • Gallego, Sergi
  • Puerto, Daniel
  • Morales-Vidal, Marta
  • Ramirez, Manuel G.
  • Taleb, Soumia Imane
  • Hernández Prados, Antonio
  • Ortuño, Manuel
  • Neipp, Cristian
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Hernández Prados, Antonio|||/items/f105e529-b94b-4ab0-848c-cf654d19a6ba
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
Photopolymers have become an important recording material for many applications, mainly related to holography. Their flexibility to change the chemical composition together with the optical properties made them a versatile holographic recording material. The introduction of liquid crystal molecules in a photopolymer based on multifunctional monomer provides us the possibility to generate tunable holograms. The switchable holographic elements are a key point for see-through applications. In this work, we optimize the holographic polymer-dispersed liquid crystals composition to improve the performance of tunable waveguide couplers based on transmission gratings and specifically their response under an applied electric field. A variation around 60% in the transmission efficiency was achieved.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Multifunctional monomer based materials for complex low spatial frequency diffractive optical elements recording

  • Fernandez, Roberto
  • Gallego, Sergi
  • Tomita, Yasuo
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Fernandez, Roberto|||/items/ca9b5808-d6e3-44da-a2b8-6ace83cf0a56
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
We study the behaviour and compare two nanostructurated materials based on multifunc- tional monomers: a nanoparticle-thiol-ene-polymer composite (NPC) and a holographic polymer dispersed liquid crystals (HPDLC) with dipentaerythritol penta/hexa-acrylate (DPHPA) as main monomer. We evaluate their suitability to record complex large grating spacing diffractive optical elements (DOEs), such as blazed gratings. Thus, we can explode their multifunctional capabilities to develop electrically tunable DOEs, thanks to the addition of LC molecules.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Study of the imaging characteristics of holographic waveguides

  • Bleda, Sergio
  • Neipp, Cristian
  • Francés, Jorge
  • Alvarez, Mariela L.
  • Márquez, Andrés
  • Gallego, Sergi
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Alvarez, Mariela L.|||/items/0ea731c9-dfb8-49b3-8945-0f6bcb818068
  • Beléndez, Augusto
  • Bleda, Sergio|||/items/d2b99c60-360f-4a4f-a712-934a01eea569
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
In this work we study and characterize and holographic waveguide system composed of two volume diffraction gratings, which act as optical couplers and a glass substrate that acts as a waveguide. The features such us high diffraction efficiencies and Bragg angle selectivity exhibited by volume diffraction gratings allow the appropriated adjustment of the incident light to be diffracted in the direction of total reflection condition inside the glass substrate with high efficiency. In this work the holographic waveguide is recorded on different photopolymer materials, which optimization is controlled to obtain high spatial frequencies and stable fringes. The effect of the shrinkage of the holograms after recording in the quality of the image obtained from the optical waveguide is also studied. To perform the experiments two kind of photopolymers were studied: a nanoparticle-(thiol-ene) polymer composite, NPC, and a penta/hexa-acrylate based polymer with dispersed nematic liquid crystal molecules, PDLC. The holographic characteristics such as diffraction efficiency or wavelength selectivity obtained with the waveguides recorded on the different photopolymers were also studied and compared.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Holographic lenses stored in Biophotopol

  • Lloret, Tomás
  • Navarro-Fuster, Víctor
  • Ramirez, Manuel G.
  • Neipp, Cristian
  • Ortuño, Manuel
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Lloret, Tomás|||/items/21981029-b54d-44b2-87a1-a134245d1805
  • Navarro-Fuster, Víctor|||/items/b148fcc2-81b7-4996-b2b9-a644f9797703
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Innovative technologies demand versatile and environmentally compatible optical elements. In this paper we evaluated the quality of volume phase transmission lenses stored in a biocompatible photopolymer. Holographic lenses (HL) have been obtained with the same focal and diameter, for a symmetric and asymmetric experimental setups, and positive and negative focal. The quality of these lenses have been evaluated: theoretically and experimentally, from the calculation of the modulation transfer function (MTF) by capturing the point spread function (PSF) with a CCD sensor. The HLs that have shown better quality are the negative asymmetrically recorded compared with the theoretical ones.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Photopolymer characterization by high frequency pulsed laser

  • Puerto, Daniel
  • Gallego, Sergi
  • Sirvent-Verdú, Joan Josep
  • Ortuño, Manuel
  • Márquez, Andrés
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Sirvent-Verdú, Joan Josep|||/items/b0bc0991-d9a5-4f58-a8d1-6c27710afdbc
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Maximizing phase modulation in photopolymers remains a challenge in order to use these materials to fabricate photonics devices. Different material compositions and irradiation conditions have been studied in order to achieve it. One of the main conclusions has been that with continuous laser exposure better results are achieved. However, our results show that higher phase modulation can be achieved using pulsed laser. The study has been done with crosslinked acrylamide-based photopolymers (AA/PVA), Biophotopol and Holographic Polymer-Dispersed Liquid Crystals (HPDLC) exposed with a pulsed laser (532 nm). Thus, phase modulation increases of 8-15% have been achieved between pulsed laser and continuous laser exposure, with a maximum phase depth of 3π radians in AA/PVA, ~3π/2 in Biophotopol and ~π in H-PDLC. This opens the door to the use of this photopolymer in large-scale manufacturing, such as H-PDLC photopolymers to fabricate tunable lenses using the laser-induced direct transfer (LIFT) technique.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Analytical evaluation of normalization criteria for the diffraction efficiency of blazed gratings on LCoS devices

  • Márquez, Andrés
  • Martínez Guardiola, Francisco Javier
  • Francés, Jorge
  • Neipp, Cristian
  • Calzado Estepa, Eva María
  • Puerto, Daniel
  • Alvarez, Mariela L.
  • Gallego, Sergi
  • Beléndez, Augusto
  • Alvarez, Mariela L.|||/items/0ea731c9-dfb8-49b3-8945-0f6bcb818068
  • Beléndez, Augusto
  • Calzado Estepa, Eva María|||/items/5716b8f6-2afe-4da1-9308-a19d8791b41d
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Through analytical expressions, three experimental-based normalizations are evaluated for the diffraction efficiency of blazed gratings on LCoS devices. We find that non-inclusion of the fill factor, usually the case, leads to wrong conclusions.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Versatile simplified physical model for parallel aligned liquid crystal devices

  • Márquez, Andrés
  • Martínez Guardiola, Francisco Javier
  • Francés, Jorge
  • Bleda, Sergio
  • Alvarez, Mariela L.
  • Pascual, Inmaculada
  • Gallego, Sergi
  • Beléndez, Augusto
  • Alvarez, Mariela L.|||/items/0ea731c9-dfb8-49b3-8945-0f6bcb818068
  • Beléndez, Augusto
  • Bleda, Sergio|||/items/d2b99c60-360f-4a4f-a712-934a01eea569
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Liquid crystal on silicon (LCoS) displays have become the most attractive microdisplays for all sort of spatial light modulation applications. Among the different LCoS technologies, parallel aligned LCoS (PA-LCoS) are especially interesting. They offer unique capabilities as spatial light modulators (SLM), since they enable phase-only modulation without coupled amplitude modulation, and with millions of addressable pixels. In this work we evaluate and demonstrate the various capabilities offered by a novel and simplified physical model for parallel aligned liquid crystal devices (PA-LC), thus also applicable to PA-LCoS microdisplays. The model provides the voltage dependent retardance values, necessary for spatial light modulation applications, for a very wide range of incidence angles and any wavelength in the visible. First, it needs to be calibrated through a reverse-engineering approach. In this calibration, the values obtained for two of the three parameters provide the correct values for important internal properties of these devices related with the birefringence, cell gap and director profile. Therefore, the proposed model can be used as a means to inspect internal physical properties of the cell. Last but not least the model is useful to simulate the retardance for novel PA-LC devices as a function of the LC compound and cell gap. Therefore, it is not only a reverse-engineering model but it also constitutes an analytical alternative to the usual numerical approaches for PA-LC devices design and construction.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Waveguide couplers based on HPDLC for see-through applications: initiator optimization

  • Gallego, Sergi
  • Puerto, Daniel
  • Neipp, Cristian
  • Ortuño, Manuel
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Polymer nanocomposites are designed and engineered on a nanometer scale with versatile applications including optics and photonics. During the last two decades, different photopolymerizable nano-compounds were introduced and developed to modify polymer properties. In this sense, inorganic and organic nanoparticles have been introduced to increase the refractive index modulation and/or to reduce the shrinkage. Liquid crystal polymer composites have been added to the category of active photopolymer materials with an electrically switchable option. Nowadays, in the design of smart glasses some problems remain on the table, like power consumption, the limitation of the resolution, the wide field of view, etc. The inclusion of holographic optical element has provided some possible solutions. In particular the photopolymers have been reported a good system to bring the photons produced in the image creation to the eye. Our group proposed an alternative scheme using transmission holographic elements. The fabrication architecture was tested with different photopolymers in order to optimize their chemical composition, and we proposed three schemes adapted to each material properties. In this paper we study the influence of the initiator concentration, for Holographic polymer dispersed liquid crystal photopolymer, on the refractive index modulation and on the tunable properties of these holographic optical elements.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Caracterización de lentes holográficas registradas en un fotopolímero compatible medioambientalmente

  • Lloret, Tomás
  • Navarro-Fuster, Víctor
  • Ramirez, Manuel G.
  • Neipp, Cristian
  • Ortuño, Manuel
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Lloret, Tomás|||/items/21981029-b54d-44b2-87a1-a134245d1805
  • Navarro-Fuster, Víctor|||/items/b148fcc2-81b7-4996-b2b9-a644f9797703
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
En este trabajo evaluamos la calidad de lentes holográficas de volumen almacenadas en un fotopolímero respetuoso con el medio ambiente llamado Biophotopol. Las lentes holográficas (HL) se han obtenido en configuraciones experimentales simétricas y asimétricas con distancia focal negativa. La calidad de estas lentes se ha evaluado calculando la función de transferencia de modulación (MTF) para dos longitudes de onda (473 y 633 nm). Las HL que han demostrado una mejor calidad de imagen son las registradas asimétricamente y evaluadas a 473 nm.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Efficient and stable holographic gratings stored in an environmentally friendly photopolymer

  • Morales-Vidal, Marta
  • Ramirez, Manuel G.
  • Sirvent, Daniel
  • Martínez Guardiola, Francisco Javier
  • Alvarez, Mariela L.
  • Pascual, Inmaculada
  • Alvarez, Mariela L.|||/items/0ea731c9-dfb8-49b3-8945-0f6bcb818068
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
Holographic gratings stored in one of the greenest photopolymers, called Biophotopol and patented by Holography and Optical Processing group at the University of Alicante, have been analyzed to achieve stable over time and efficient holograms. A curing process usually produces a diffraction efficiency (DE) decrement. However, when a curing process is not performed, the holographic gratings are not stable and DE will decrease over time due to the diffusion of molecular components inside the photopolymer. In this work, a DE increment has been demonstrated after a curing stage (performed with an incoherent and lowcost LED lamp). A detailed curing protocol to stabilize the holograms while maintaining high DE, has been carried out in unslanted transmission gratings of 1205 l/mm. The holographic transmission reflection setup allows the possibility to evaluate the transmitted and diffracted intensity beam relation, in real time, by using a He-Ne laser (633 nm), while the gratings were recording with an Argon laser (488 nm). It has been demonstrated more than a 30% DE increment after a curing process when a maximum DE in the recording stage had not been still achieved. However, in the singular case that a maximum DE in the recording stage has been already obtained, a curing stage process could produce overmodulation effects, and therefore, a DE decrement. In conclusion, a maximum DE is obtained in curing and stable hologram gratings (recording them with proper radiant exposures) over an environmentally compatible photopolymer.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Holography: 50th anniversary of Dennis Gabor’s Nobel Prize: Part I. A historical perspective

  • Beléndez, Augusto
  • Sheridan, John T.
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
A historical review of the origins of holography is presented. Special emphasis is placed on the contributions of Gabor, Denisyuk and Leith to the development of holography, to motivate and inspire students and young researchers.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Simplified physical modeling of parallel-aligned liquid crystal devices at highly non-linear tilt angle profiles

  • Francés, Jorge
  • Márquez, Andrés
  • Martínez Guardiola, Francisco Javier
  • Bleda, Sergio
  • Gallego, Sergi
  • Neipp, Cristian
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Bleda, Sergio|||/items/d2b99c60-360f-4a4f-a712-934a01eea569
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
In recent works, we demonstrated the accuracy and physical relevance of a highly simplified reverse-engineering analytical model for a parallel-aligned liquid crystal on silicon devices (PA-LCoS). Both experimental measurements and computational simulations applying the rigorous split-field finite difference time domain (SF-FDTD) technique led to this conclusion in the low applied voltages range. In this paper, we develop a complete rigorous validation covering the full range of possible applied voltages, including highly non-linear liquid crystal (LC) tilt angle profiles. We demonstrate the applicability of the model for spectral and angular retardation calculations, of interest in spatial light modulation applications. We also show that our analytical model enables the calculation of the retardance for novel PA-LC devices as a function of the LC compound and cell gap, becoming an appealing alternative to the usual numerical approaches for PA-LC devices design.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Celebrating holography anniversaries: a historical perspective

  • Beléndez, Augusto
  • Sheridan, John T.
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
The year 2022 marks the 75th anniversary of Dennis Gabor?s invention of the holographic method, what he called microscopy by reconstructed wave-fronts, as well as the 60th anniversary of the publication in 1962 of two seminal papers in the field of holography: the introduction of the reflection hologram by Yuri Denisyuk, and the description of the holographic process from the point of view of communication theory by Emmett Leith and Juris Upatnieks. Within the framework of these celebrations, a historical review of the origins of holography is presented with special emphasis on the contributions of Gabor, Denisyuk and Leith to the development of holography.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Complex diffractive optical elements stored in photopolymers

  • Fernandez, Roberto
  • Gallego, Sergi
  • Márquez, Andrés
  • Neipp, Cristian
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Fernandez, Roberto|||/items/ca9b5808-d6e3-44da-a2b8-6ace83cf0a56
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Photopolymers have been used mainly for holographic recording applications. Nowadays, the improvements made in diffusion models, simulating phase image stored in these materials, enable a wide range of complex diffractive optical elements (DOEs) to be fabricated. Concurrently, the miniaturization of spatial light modulators makes it possible to generate both symmetric and non-symmetric DOEs. We show the procedure to record different complex diffractive elements, and we study the viability to fabricate them based on photopolymers. In particular we evaluate the recording of achromatic lenses, axicons and fork gratings interesting to obtain optical vortices. To achieve this goal, we use a three-dimensional diffusion model, previously experimentally validated with the recording of diffractive lenses.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Aberration-Based Quality Metrics in Holographic Lenses

  • Lloret, Tomás
  • Navarro-Fuster, Víctor
  • Ramirez, Manuel G.
  • Morales-Vidal, Marta
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Lloret, Tomás|||/items/21981029-b54d-44b2-87a1-a134245d1805
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Navarro-Fuster, Víctor|||/items/b148fcc2-81b7-4996-b2b9-a644f9797703
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Aberrations and the image quality of holographic lenses were evaluated by a Hartmann–Shack (HS) wavefront sensor. Two lenses, one recorded with a symmetrical configuration and the other with an asymmetrical one, were stored in a photopolymer called Biophotopol. Each was reconstructed with two different wavelengths, 473 nm and 633 nm. Different metrics were applied to determine and quantify the aberration of the lenses (Zernike coefficients, Seidel coefficients, Marechal tolerances, root-mean-square (RMS), peak to valley, critical fraction of the pupil), and the quality of the image they provided (Strehl ratio, entropy, cutoff frequency, modulation transfer function (MTF), and area under the MTF). Good agreement between the metrics related to optical quality was obtained. The negative asymmetric holographic lenses had less aberration than the positive symmetric ones.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Diffractive and Interferometric Characterization of Nanostructured Photopolymer for Sharp Diffractive Optical Elements Recording

  • Fernandez, Roberto
  • Gallego, Sergi
  • Tomita, Yasuo
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Fernandez, Roberto|||/items/ca9b5808-d6e3-44da-a2b8-6ace83cf0a56
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
We study the behavior of a nanoparticle-polymer composite (NPC) material, based on a thiol-ene monomer system, working with long grating spacing. Thus, we evaluate the suitability of the NPC for storing complex diffractive optical elements with sharp profiles, such as blazed gratings. Using holographic methods, we measure the “apparent” diffusion of the material and the influence of the spatial period on this diffusion. The applicability of this material in complex diffractive optical elements (DOEs) recording is analyzed using an interferometric method. Supported by the results of this analysis, we record blazed gratings with different grating spacing and measure the maximum diffraction efficiency (DE) achieved. The results show that NPC has a good behavior in this range of spatial frequencies.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Anamorphic and Local Characterization of a Holographic Data Storage System with a Liquid-Crystal on Silicon Microdisplay as Data Pager

  • Martínez Guardiola, Francisco Javier
  • Márquez, Andrés
  • Calzado Estepa, Eva María
  • Bleda, Sergio
  • Gallego, Sergi
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Bleda, Sergio|||/items/d2b99c60-360f-4a4f-a712-934a01eea569
  • Calzado Estepa, Eva María|||/items/5716b8f6-2afe-4da1-9308-a19d8791b41d
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
In this paper, we present a method to characterize a complete optical Holographic Data Storage System (HDSS), where we identify the elements that limit the capacity to register and restore the information introduced by means of a Liquid Cristal on Silicon (LCoS) microdisplay as the data pager. In the literature, it has been shown that LCoS exhibits an anamorphic and frequency dependent effect when periodic optical elements are addressed to LCoS microdisplays in diffractive optics applications. We tested whether this effect is still relevant in the application to HDSS, where non-periodic binary elements are applied, as it is the case in binary data pages codified by Binary Intensity Modulation (BIM). To test the limits in storage data density and in spatial bandwidth of the HDSS, we used anamorphic patterns with different resolutions. We analyzed the performance of the microdisplay in situ using figures of merit adapted to HDSS. A local characterization across the aperture of the system was also demonstrated with our proposed methodology, which results in an estimation of the illumination uniformity and the contrast generated by the LCoS. We show the extent of the increase in the Bit Error Rate (BER) when introducing a photopolymer as the recording material, thus all the important elements in a HDSS are considered in the characterization methodology demonstrated in this paper.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Wave-couplers for see-through applications on photopolymers

  • Gallego, Sergi
  • Neipp, Cristian
  • Bleda, Sergio
  • Fernandez, Roberto
  • Márquez, Andrés
  • Morales-Vidal, Marta
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Bleda, Sergio|||/items/d2b99c60-360f-4a4f-a712-934a01eea569
  • Fernandez, Roberto|||/items/ca9b5808-d6e3-44da-a2b8-6ace83cf0a56
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Nowadays, wearable eyeglasses and waveguides are one of the most promising applications in photonics for the holographic recording materials. Holographic techniques structures together with the optimized recording materials permit the fabrication of the high resolution structures. In the applications of see-through glasses, the light signal can be generated on the back of the human head and guided along the temples of the glass to the frontal lenses and redirected to the eye. Therefore, we need two wave-couplers, W-C, one to trap the light inside the temples, and second in the lenses one to redirect the guide light into the eye. The holography gives us a possibility when we store the holographic optical element, HOE, with a determinate wavelength and we use the display with a longer one. Our proposal is fabricating this wave-couplers for normal light incidence using photopolymers, as recording material, because we can self-fabricate them and modify their composition and optical properties. We fabricate the HOE using a 532 nm laser to guide the 632 nm light. Furthermore, in this work we present the results obtained with different family of photopolymers.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Tunable focal photopolymer lenses printed for the first time by laser-induced-forward transfer without a sacrificial layer

  • Puerto, Daniel
  • Gallego, Sergi
  • Constantinescu, Cătălin-Daniel
  • Florian, Camilo
  • Ortuño, Manuel
  • Márquez, Andrés
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Alloncle, Anne Patricia
  • Beléndez, Augusto
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
The fabrication of polymeric lens arrays on flexible surfaces for its use in wide-field visual systems is a challenge that is being addressed by using the Laser Induced Forward Transfer (LIFT) technique. The objective is to achieve polymer laser printing by improving both the overall printing quality and the manufacturing time of these lens matrices compared to other techniques. Another challenge when using tunable polymers is the customization of tunable focal lenses dynamically controlling their optical properties. In this work we address both aspects by using a tunable photopolymer thanks to liquid crystal molecules, such as H-PDLC.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Efficient and stable holographic gratings stored in an environmentally friendly photopolymer

  • Morales-Vidal, Marta
  • Ramirez, Manuel G.
  • Sirvent, Daniel
  • Martínez Guardiola, Francisco Javier
  • Alvarez, Mariela L.
  • Pascual, Inmaculada
  • Alvarez, Mariela L.|||/items/0ea731c9-dfb8-49b3-8945-0f6bcb818068
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
Holographic gratings stored in low-toxicity photopolymer, Biophotopol, have been analyzed to achieve stable and efficient holograms. A curing process allows the hologram stabilization, but at the same time, it could produce a diffraction efficiency (DE) reduction. Here, a detailed low-cost LED curing protocol is shown to stabilize over time 1205 l/mm transmission holograms, and at the same time, a 33% DE increment (with respect non-curing holograms) have been demonstrated. Finally, to obtain a better understanding of DE change, a theoretical fit of our experimental result, based on Kogelnik’s coupled wave theory was carried out and discussed.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Multiplexado angular en almacenamiento holográfico de información sobre fotopolímero, Angular multiplexing in holographic data storage using photopolymers

  • Martínez Guardiola, Francisco Javier
  • Calzado Estepa, Eva María
  • Márquez, Andrés
  • Gallego, Sergi
  • Morales-Vidal, Marta
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Calzado Estepa, Eva María|||/items/5716b8f6-2afe-4da1-9308-a19d8791b41d
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
En este trabajo queremos presentar una primera evaluación de los resultados obtenidos al usar el multiplexado angular en nuestro sistema de almacenamiento holográfico de información. Nuestro sistema presenta varias innovaciones que nos ayudarán a aumentar la densidad de datos almacenados en el material, una de ellas es el multiplexado angular. Para hacer uso de este multiplexado hay que tener en cuenta ciertas consideraciones que hacen referencia a la energía depositada en el material en cada página de datos, no sólo se busca no saturar el material en las sucesivas grabaciones, sino también es deseable que estas páginas tengan la misma visibilidad cuando sean reconstruidas. El ajuste de estos factores puede realizarse experimentalmente.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Unitary matrix approach for a precise voltage dependent characterization of reflective liquid crystal devices by average Stokes polarimetry

  • Márquez, Andrés
  • Martínez Guardiola, Francisco Javier
  • Francés, Jorge
  • Calzado Estepa, Eva María
  • Puerto, Daniel
  • Gallego, Sergi
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Calzado Estepa, Eva María|||/items/5716b8f6-2afe-4da1-9308-a19d8791b41d
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Precise characterization of parallel-aligned liquid crystal on silicon microdisplays has an important impact in many advanced photonics applications. We show liquid crystal on silicon (LCoS) modeled as a non-absorbent reciprocal device. Combined with time-average Stokes polarimetry, LCoS enables us to demonstrate robust measurements across the whole applied voltage range for the retardance and its flicker, and also as a novelty for the director orientation. We obtain that the director orientation changes across the voltage range, especially at larger applied voltages. This is a small effect, but it may provide a deeper insight into the internal dynamics in the liquid crystal layer, and in sensitive phase-only applications will produce a coupling between amplitude and phase.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Numerical Analysis of H-PDLC Using the Split-Field Finite-Difference Time-Domain Method

  • Bleda, Sergio
  • Francés, Jorge
  • Gallego, Sergi
  • Márquez, Andrés
  • Neipp, Cristian
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Bleda, Sergio|||/items/d2b99c60-360f-4a4f-a712-934a01eea569
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
In this work, an accurate numerical modeling of the diffraction properties of transmission holographic polymer dispersed liquid crystal (H-PDLC) gratings is presented. The method considers ellipsoid geometry-based liquid crystal (LC) droplets with random properties regarding size and location across the H-PLDC layer and also the non-homogeneous orientation of the LC director within the droplet. The direction of the LC director inside the droplets can be varied to reproduce the effects of the external voltage applied in H-PDLC-based gratings. From the LC director distribution in the droplet, the permittivity tensor is defined, which establishes the optical anisotropy of the media, and it is used for numerically solving the light propagation through the system. In this work, the split-field finite-difference time-domain method (SF-FDTD) is applied. This method is suited for accurately analyzing periodic media, and it considers spatial and time discretisation of Maxwell’s equations. The scheme proposed here is used to investigate the influence on the diffraction properties of H-PDLC as a function of the droplets size and the bulk fraction of LC dispersed material.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Roadmap on holography

  • Sheridan, John T.
  • Kostuk, Raymond K.
  • Fimia Gil, Antonio
  • Wang, Yongtian
  • Lu, Wengao
  • Zhong, Haizheng
  • Tomita, Yasuo
  • Neipp, Cristian
  • Francés, Jorge
  • Gallego, Sergi
  • Pascual, Inmaculada
  • Marinova, Vera
  • Lin, Shiuan Huei
  • Hsu, Ken Yuh
  • Bruder, Friedrich
  • Hansen, Sven
  • Manecke, Christel
  • Meisenheimer, Richard
  • Rewitz, Christian
  • Rölle, Thomas
  • Odinokov, Sergey
  • Matoba, Osamu
  • Kumar, Manoj
  • Quan, Xiangyu
  • Awatsuji, Yasuhiro
  • Wachulak, Przemysław W.
  • Gorelaya, Alina V.
  • Sevryugin, Alexander A.
  • Shalymov, Egor V.
  • Yu Venediktov, Vladimir
  • Chmelik, Radim
  • Ferrara, Maria Antonietta
  • Coppola, Giuseppe
  • Márquez, Andrés
  • Beléndez, Augusto
  • Yang, Weijian
  • Yuste, Rafael
  • Bianco, Andrea
  • Zanutta, Alessio
  • Falldorf, Claas
  • Healy, John J.
  • Fan, Xin
  • Hennelly, Bryan M.
  • Zhurminsky, Igor
  • Schnieper, Marc
  • Ferrini, Rolando
  • Fricke, Sören
  • Situ, Guohai
  • Wang, Hao
  • Abdurashitov, Arkady S.
  • Tuchin, Valery V.
  • Petrov, Nikolay V.
  • Nomura, Takanori
  • Morim, Derek R.
  • Saravanamuttu, Kalaichelvi
  • Beléndez, Augusto
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
From its inception holography has proven an extremely productive and attractive area of research. While specific technical applications give rise to 'hot topics', and three-dimensional (3D) visualisation comes in and out of fashion, the core principals involved continue to lead to exciting innovations in a wide range of areas. We humbly submit that it is impossible, in any journal document of this type, to fully reflect current and potential activity; however, our valiant contributors have produced a series of documents that go no small way to neatly capture progress across a wide range of core activities. As editors we have attempted to spread our net wide in order to illustrate the breadth of international activity. In relation to this we believe we have been at least partially successful.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Comparativa entre un modelo simplificado para pantallas PA-LCoS y evaluación rigurosa aplicando SF-FDTD

  • Márquez, Andrés
  • Francés, Jorge
  • Martínez Guardiola, Francisco Javier
  • Gallego, Sergi
  • Alvarez, Mariela L.
  • Calzado Estepa, Eva María
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Alvarez, Mariela L.|||/items/0ea731c9-dfb8-49b3-8945-0f6bcb818068
  • Beléndez, Augusto
  • Calzado Estepa, Eva María|||/items/5716b8f6-2afe-4da1-9308-a19d8791b41d
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Recientemente propusimos un modelo simplificado que permite predecir con una incertidumbre inferior al 5% el retardo que producen las pantallas de cristal líquido sobre silicio (PALCoS) a lo largo del espectro visible y para cualquier ángulo de incidencia entre 0º y 45º. Aquí mostramos que el modelo también nos permite calcular propiedades fundamentales de la capa de cristal líquido, tales como el ángulo de inclinación en función del voltaje aplicado y la birrefringencia.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Complex Diffractive Optical Elements Stored in Photopolymers

  • Fernandez, Roberto
  • Gallego, Sergi
  • Márquez, Andrés
  • Neipp, Cristian
  • Calzado Estepa, Eva María
  • Francés, Jorge
  • Morales-Vidal, Marta
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Calzado Estepa, Eva María|||/items/5716b8f6-2afe-4da1-9308-a19d8791b41d
  • Fernandez, Roberto|||/items/ca9b5808-d6e3-44da-a2b8-6ace83cf0a56
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
We study the recording of complex diffractive elements, such as achromatic lenses, fork gratings or axicons. Using a 3-D diffusion model, previously validated, we are able to predict the behavior of photopolymer during recording. The experimental recording of these complex elements is possible thanks to a new generation spatial light modulator capable of generating periodic and aperiodic profiles. Both experimental and theoretical are analyzed and compared. The results show not only the good response of theoretical model to predict the behavior of the materials, but also the viability of photopolymers to store these kind of elements.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Holographic solar concentrators stored in an eco-friendly photopolymer

  • Morales-Vidal, Marta
  • Ramirez, Manuel G.
  • Berramdane, Kheloud
  • Lloret, Tomás
  • Gallego, Sergi
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Lloret, Tomás|||/items/21981029-b54d-44b2-87a1-a134245d1805
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
In this work it is shown the first characterization of holographic solar concentrators recorded in Biophotopol - one of the greenest photopolymers. Biophotopol is an acrylate-based and water-soluble photopolymer with good recycling properties. The composition of this photopolymer and their thickness are easily changeable, which implies an important advantage vs. others commercialized photopolymers. Good diffraction efficiency and wide acceptance angles are achieved on phase volume transmission holograms by using an optimized composition and thin layers. A curing stage with a white incoherent light has been performed to obtain high temporal stability together with a good diffraction efficiency. Finally, the performance of the holographic lenses as holographic solar concentrators has been evaluated with an electronic setup connected to a polycrystalline silicon photovoltaic cell and a high intensity solar simulator emitting a standard solar spectrum (AM1.5G).
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Predictive management of polarized light in liquid crystal devices based on average and flicker molecular tilt

  • Márquez, Andrés
  • Martínez Guardiola, Francisco Javier
  • Francés, Jorge
  • Gallego, Sergi
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
We incorporate the prediction of flicker to a semiphysical and analytical model describing the angular and wavelength dependencies of retardance in parallel aligned liquid crystal (PA-LC) devices. This makes the model unique due to the wide range of calculation it offers while keeping its simplicity. Prediction of the modulation of retardance and its associated flicker relies on the fitting of the equivalent tilt angle of the molecules as a function of applied voltage. Specific results are given for liquid crystal on silicon (PA-LCoS) microdisplays, central to many spatial light modulation applications such as the generation of structured polarized beams. Experimental characterization results at arbitrary angles and wavelengths prove the predictive capability of the model. To highlight the richness of situations with PA-LCoS devices, we provide results for two different digital addressing sequences producing different levels of flicker. We focus on the application of the PA-LCoS as a polarization state generator (PSG) and we emphasize the ability of our approach to evaluate the performance across the visible spectrum and for a wide range of incidence angles. Our approach offers novel capabilities in the generation of arbitrary states of polarization, both fully and partially polarized.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Accurate, Efficient and Rigorous Numerical Analysis of 3D H-PDLC Gratings

  • Francés, Jorge
  • Bleda, Sergio
  • Puerto, Daniel
  • Gallego, Sergi
  • Márquez, Andrés
  • Neipp, Cristian
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Bleda, Sergio|||/items/d2b99c60-360f-4a4f-a712-934a01eea569
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
This work presents recent results derived from the rigorous modelling of holographic polymer-dispersed liquid crystal (H-PDLC) gratings. More precisely, the diffractive properties of transmission gratings are the focus of this research. This work extends previous analysis performed by the authors but includes new features and approaches. More precisely, full 3D numerical modelling was carried out in all analyses. Each H-PDLC sample was generated randomly by a set of ellipsoid geometry-based LC droplets. The liquid crystal (LC) director inside each droplet was computed by the minimisation of the Frank elastic free energy as a function of the applied electric field. The analysis carried out considered the effects of Frank elastic constants K11, K22 and K33; the anchoring strength W0; and even the saddle-splay constant K24. The external electric field induced an orientation of the LC director, modifying the optical anisotropy of the optical media. This effect was analysed using the 3D split-field finite-difference time-domain (SF-FDTD) method. In order to reduce the computational costs due to a full 3D tensorial analysis, a highly optimised method for high-performance computing solutions (HPC) was developed. The influences of the anchoring and voltage on the diffraction efficiencies were investigated, showing the potential of this approach.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Measurement of the refractive index profile of an optical fiber by Fresnel diffraction

  • Bleda, Sergio
  • Neipp, Cristian
  • Martínez Guardiola, Francisco Javier
  • Alvarez, Mariela L.
  • Calzado Estepa, Eva María
  • Márquez, Andrés
  • Francés, Jorge
  • Gallego, Sergi
  • Alvarez, Mariela L.|||/items/0ea731c9-dfb8-49b3-8945-0f6bcb818068
  • Bleda, Sergio|||/items/d2b99c60-360f-4a4f-a712-934a01eea569
  • Calzado Estepa, Eva María|||/items/5716b8f6-2afe-4da1-9308-a19d8791b41d
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
In this work we present a non-destructive technique based on Fresnel diffraction to obtain the refractive index profile of a fiber grating. The system has been firstly calibrated by using the experimental data of the diffraction pattern of rectangular slits at different distances.