Pasar al contenido principal

NUEVAS ESTRATEGIAS DE FUNCIONALIZACION ELECTROQUIMICA DE MATERIALES CARBONOSOS NANOESTRUCTURADOS PARA LA REDUCCION DE OXIGENO Y BIOSENSORES

MAT2016-76595-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2016
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ALICANTE

Resultados relacionados

Resultados totales (Incluyendo duplicados): 34
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Metal-free heteroatom-doped carbon-based catalysts for ORR. A critical assessment about the role of heteroatoms

  • Quílez-Bermejo, Javier
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
Metal-free carbon-based catalysts have gained much attention during last years because of their interesting properties towards oxygen reduction reaction. Intrinsic parameters of carbon materials such as porosity, structural order, conductivity and defects have proved to have a strong influence in the catalytic activity of these materials. However, the highest differences in catalytic activity are obtained via doping with heteroatoms, being nitrogen the most remarkable in terms of activity and selectivity. One of the most challenging goals of the scientific community is to unravel the role of the functional groups in order to design an optimized material. However, the complexity of isolating one specific functionality, the difficult unambiguous characterization of the species and the influence of the intrinsic properties of the carbon materials, make the identification of the active sites a complex and controversial issue. This review presents a critical assessment about the role of heteroatoms on ORR from the analysis of the literature that combine both experimental work and computational modelling.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Oxidation of Different Microporous Carbons by Chemical and Electrochemical Methods

  • Berenguer Betrián, Raúl
  • Morallon, Emilia
  • Berenguer Betrián, Raúl|||/items/660b8462-63ec-4910-98e0-ac425e6bd7a6
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
The functionalization of high surface area microporous carbon materials by oxidative treatments receives great interest for multiple applications. The micropore structure of the material and the oxidation method could play an important role in the process. In this work, we analyze and compare the effects of liquid-phase chemical and alternative electrochemical oxidation treatments in the textural and chemical properties of four microporous carbon materials, namely a granular-, cloth-, and powder-like activated carbon (AC) and a powdery zeolite templated carbon (ZTC). Particularly, we provide new data on oxidation kinetics and changes on microporosity and surface chemistry of various microporous carbons. Characterization techniques reveal that the extent, textural changes, and selectivity of the oxidation greatly depend on the type of microporous material and the oxidation method. The incorporation of surface oxygen groups (SOGs) generally causes a more-or-less significant decrease in the measured micropore volume and the specific surface area. In the studied ACs, the extent of oxidation and BET surface area reduction augment with their micropore volume, and the textural changes seem to be governed by the micropore blockage by SOGs. The disordered microporous structure of these materials is then quite robust toward oxidation, but its heterogeneity may contribute to the lack of selectivity during this process. By contrast, the regular micropore framework of the ZTC is rapidly destroyed even under soft oxidizing conditions, but it is proposed to promote certain selectivity during oxidation. The high reactivity and structural fragility of ZTC are assigned to the weak interconnections and large number of exposed edge sites in its structure. Our results demonstrate the fast oxidation rate of chemical treatments under different conditions, especially in the case of ZTC, what is proposed to restrict the control and to limit the oxidizability and selectivity of these functionalization processes. Contrarily, the electrochemical treatments are proved to better control the kinetics of oxidative functionalization, what may explain the observed higher efficiency and selectivity for SOGs introduction and the minimization of degradation in fragile microporous structures.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

New poly(o-phenylenediamine)/modified-clay nanocomposites: A study on spectral, thermal, morphological and electrochemical characteristics

  • Khelifa, Ikram
  • Belmokhtar, Abdelkader
  • Berenguer Betrián, Raúl
  • Benyoucef, Abdelghani
  • Morallon, Emilia
  • Berenguer Betrián, Raúl|||/items/660b8462-63ec-4910-98e0-ac425e6bd7a6
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
This work describes the synthesis and characterization of new poly(o-phenylenediamine (PoPD)/modified-clay nanocomposite materials. For the synthesis, the raw clay (named as Mag) used in this study was from Maghnia (west Algeria), (Mag) clay was ion-exchanged with cobalt(II) sulfate hydrate and copper sulfate. The modified-clays were then dispersed in a oPD monomer-containing acidic solution to carry out in-situ intercalative oxidative polymerization by ammonium persulfate. XRF and XRD characterization reveal the success of ion-exchange to form highly intercalated Mag-Co and Mag-Cu clays. After polymerization, the disappearance of the interlayer-spacing diffraction peak for the PoPD-Mag-Cu and PoPD-Mag-Co nanocomposites points out fully exfoliation of the clay structure. The formation of intercalated PoPD into modified-clay nanocomposites was confirmed by XRD, TEM, TG analysis, FTIR spectroscopy and UV–vis studies. The nanocomposites show optical properties and the redox processes observed by cyclic voltammetry indicate that the reported polymerization into modified-clays leads to electroactive hybrid materials. All these properties make these polymer/clay nanocomposites attractive materials for multiple applications.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

A stretchable and screen-printed electrochemical sensor for glucose determination in human perspiration

  • Abellán-Llobregat, Alejandra
  • Jeerapan, Itthipon
  • Bandodkar, Amay
  • Vidal, Lorena
  • Canals, Antonio
  • Wang, Joe
  • Morallon, Emilia
  • Abellán-Llobregat, Alejandra|||/items/223e5e66-b65a-4c73-bbbf-49165c1f350b
  • Canals, Antonio|||/items/4a7548bb-9862-4dd9-bee4-559e2a77eb23
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Vidal, Lorena|||/items/87ae49dd-73c8-41be-9c0c-2d3c37772793
Here we present two types of all-printable, highly stretchable, and inexpensive devices based on platinum (Pt)-decorated graphite for glucose determination in physiological fluids. Said devices are: a non-enzymatic sensor and an enzymatic biosensor, the latter showing promising results. Glucose has been quantified by measuring hydrogen peroxide (H2O2) reduction by chronoamperometry at −0.35 V (vs pseudo-Ag/AgCl) using glucose oxidase immobilized on Pt-decorated graphite. The sensor performs well for the quantification of glucose in phosphate buffer solution (0.25 M PBS, pH 7.0), with a linear range between 0 mM and 0.9 mM, high sensitivity and selectivity, and a low limit of detection (LOD). Thus, it provides an alternative non-invasive and on-body quantification of glucose levels in human perspiration. This biosensor has been successfully applied on real human perspiration samples and results also show a significant correlation between glucose concentration in perspiration and glucose concentration in blood measured by a commercial glucose meter.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Direct Electron Transfer to Cytochrome c Induced by a Conducting Polymer

  • López-Bernabeu, Sara
  • Huerta Arráez, Francisco
  • Morallon, Emilia
  • Montilla, Francisco
  • Montilla, Francisco|||/items/b1740d15-1da3-4527-98a4-f6800cea0928
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
The direct electron transfer (DET) to redox proteins has become a central topic in the development of biotechnological devices. The present work explores the mechanisms of the direct electrochemistry between cytochrome c (cyt c) and a conducting polymer, poly(3,4-ethylenedioxythiophene) doped with poly(styrenesulfonate) (PEDOT–PSS). This polymer has been electrosynthesized from its monomers in aqueous solution on gold electrodes, and its capabilities for DET to cyt c have been examined by electrochemical and spectroelectrochemical methods. The polymer was electrodeposited with controlled thickness, and we determined that the electron transfer rate constant for cyt c oxidation was about 2 orders of magnitude higher than those obtained at conventional electrodes. Spectroelectrochemical measurements allowed us to evaluate the redox state of the polymer as a function of the potential and, in addition, the observation of intrinsic cyt c redox activity upon electron transfer from the conducting polymer. During the oxidation process of this protein, lysine residues placed near the heme crevice interact electrostatically with the anionic polyelectrolyte PSS. This interaction favors the orientation of the heme group toward the chains of the PEDOT backbone, which is eventually responsible for the electron transfer to the protein.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Reactive Insertion of PEDOT-PSS in SWCNT@Silica Composites and its Electrochemical Performance

  • Djelad, Halima
  • Benyoucef, Abdelghani
  • Morallon, Emilia
  • Montilla, Francisco
  • Montilla, Francisco|||/items/b1740d15-1da3-4527-98a4-f6800cea0928
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
Hybrid silica-modified materials were synthesized on glassy carbon (GC) electrodes by electroassisted deposition of sol-gel precursors. Single-wall carbon nanotubes (SWCNTs) were dispersed in a silica matrix (SWCNT@SiO2) to enhance the electrochemical performance of an inorganic matrix. The electrochemical behavior of the composite electrodes was tested against the ferrocene redox probe. The SWCNT@SiO2 presents an improvement in the electrochemical performance towards ferrocene. The heterogeneous rate constant of the SWCNT@SiO2 can be enhanced by the insertion of poly(3,4-Ethylendioxythiophene)-poly(sodium 4-styrenesulfonate) PEDOT-PSS within the silica matrix, and this composite was synthesized successfully by reactive electrochemical polymerization of the precursor EDOT in aqueous solution. The SWCNT@SiO2-PEDOT-PSS composite electrodes showed a heterogeneous rate constant more than three times higher than the electrode without conducting polymer. Similarly, the electroactive area was also enhanced to more than twice the area of SWCNT@SiO2-modified electrodes. The morphology of the sample films was analyzed by scanning electron microscopy (SEM).
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Electrochemical functionalization of single wall carbon nanotubes with phosphorus and nitrogen species

  • Quintero-Jaime, Andrés Felipe
  • Cazorla-Amorós, Diego
  • Morallon, Emilia
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
Single Wall Carbon Nanotubes (SWCNTs) have been successfully functionalized by electrochemical oxidation in presence of 4-aminophenyl phosphonic acid (4-APPA). Electrochemical modification has been performed by cyclic voltammetry using different upper potential limits, producing the incorporation of N and P functionalities on SWCNT through polymerization reactions, although some covalent attachment cannot be discarded. Electrochemical oxidation in presence of CNT produces polymerization of 4-APPA, what has been related to the interaction between monomer and the CNT surface. The voltammograms of the functionalized SWCNT show different well-defined redox processes that are maintained at high pH. Raman spectroscopy shows that the structure of the SWCNT is maintained even at high potentials suggesting that oxidation selectively occurs in the 4-APPA monomer favoring polymer chain growth. The degree of modification of SWCNT can be easily controlled by selecting the electrochemical conditions.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Au-IDA microelectrodes modified with Au-doped graphene oxide for the simultaneous determination of uric acid and ascorbic acid in urine samples

  • Abellán-Llobregat, Alejandra
  • Vidal, Lorena
  • Rodríguez-Amaro, Rafael
  • Berenguer-Murcia, Ángel
  • Canals, Antonio
  • Morallon, Emilia
  • Abellán-Llobregat, Alejandra|||/items/223e5e66-b65a-4c73-bbbf-49165c1f350b
  • Berenguer-Murcia, Ángel|||/items/ce71666d-8c9c-47fa-b876-397de66a9989
  • Canals, Antonio|||/items/4a7548bb-9862-4dd9-bee4-559e2a77eb23
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Vidal, Lorena|||/items/87ae49dd-73c8-41be-9c0c-2d3c37772793
An electrochemical sensor based on graphene oxide decorated with gold nanoparticles has been prepared for the simultaneous quantification of uric acid (UA) and ascorbic acid (AA) in urine samples. The gold interdigitated microelectrodes array (Au-IDA) has been modified using graphene oxide doped with gold nanoparticles (AuNPs-GO/Au-IDA), which was characterized by TEM, FE-SEM, XPS and cyclic voltammetry. Excellent results were obtained for the separate quantification of UA and AA by chronoamperometry. The electrochemical sensor exhibits limits of detection (LODs) of 1.4 μM and 0.62 μM for AA and UA, respectively, limits of quantification (LOQs) of 4.6 μM (AA) and 2.0 μM (UA), and the working ranges obtained were between 4.6 μM and 193 μM for AA and between 2 μM and 1.05 mM for UA. The repeatability was studied at 20 μM providing coefficients of variation of 16% for AA and 13% for UA. Moreover, UA does not interfere in the measurement of AA and viceversa (provided that the concentration of UA is equal to or higher than 450 μM in the latter case). For lower concentrations of UA, an easy and fast strategy to quantify both analytes is presented. The good electrocatalytic activity achieved with this material makes it useful for the quantification of AA and UA in biological fluids. Other analytes like glucose, dopamine and epinephrine have been investigated. The results allow us to conclude that they do not interfere in the quantification of AA and UA in PBS (0.25 M, pH 7.0). Human urine samples have been analyzed using the method proposed, contaning AA and UA concentration levels of (0.588 ± 0.002) mM and (1.43 ± 0.02) mM, respectively, which are in the concentration range of these analytes in urine samples for healthy people.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Ultraporous nitrogen-doped zeolite-templated carbon for high power density aqueous-based supercapacitors

  • Mostazo-López, María José
  • Ruiz-Rosas, Ramiro
  • Castro-Muñiz, Alberto
  • Nishihara, Hirotomo
  • Kyotani, Takashi
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
Two zeolite templated carbons (ZTC) with comparable structure and different surface chemistry have been synthesized by chemical vapor deposition of different precursors, producing a non-doped and a N-doped carbon material (4 at. % XPS) in which most of the functionalities are quaternary N. A larger specific capacitance (farads per surface area) has been measured in acid electrolyte for the N-doped ZTC, that can be related to an improved wettability due to the presence of nitrogen and oxygen. The capacitance of N-doped ZTC is lower in alkaline electrolyte, probably due to the loss of electrochemical activity of certain oxygen functionalities. Interestingly, the electro-oxidation process of N-ZTC implies lower irreversible currents (providing higher electrochemical stability) than for ZTC. The presence of quaternary nitrogen greatly improves the electric conductivity of N-ZTC, which shows a superior rate performance. ZTC and N-ZTC capacitors were constructed using 1 M H2SO4. Under the same conditions, N-doped ZTC based capacitor has higher energy density, 6.7 vs 5.9 W h/kg. The power density of N-ZTC is four times higher, producing an outstanding maximum power of 98 kW/kg. These results provide clear evidences of the advantages of doping advanced porous carbon materials with nitrogen functionalities.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Nitrogen-Doped Superporous Activated Carbons as Electrocatalysts for the Oxygen Reduction Reaction

  • Mostazo-López, María José
  • Salinas-Torres, David
  • Ruiz-Rosas, Ramiro
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Salinas-Torres, David|||/items/351ed20b-cc25-463c-bf78-b64d35945503
Nitrogen-containing superporous activated carbons were prepared by chemical polymerization of aniline and nitrogen functionalization by organic routes. The resulting N-doped carbon materials were carbonized at high temperatures (600–800 °C) in inert atmosphere. X-ray Photoelectron Spectroscopy (XPS) revealed that nitrogen amount ranges from 1 to 4 at.% and the nature of the nitrogen groups depends on the treatment temperature. All samples were assessed as electrocatalysts for the oxygen reduction reaction (ORR) in alkaline solution (0.1 M KOH) in order to understand the role of well-developed microporosity as well as the different nitrogen functionalities on the electrocatalytic performance in ORR. It was observed that nitrogen groups generated at high temperatures were highly selective towards the water formation. Among the investigated samples, polyaniline-derived activated carbon carbonized at 800 °C displayed the best performance (onset potential of 0.88 V versus RHE and an electron transfer number of 3.4), which was attributed to the highest concentration of N–C–O sites.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Manganese oxides/LaMnO3 perovskite materials and their application in the oxygen reduction reaction

  • Flores-Lasluisa, Jhony Xavier
  • Huerta Arráez, Francisco
  • Cazorla-Amorós, Diego
  • Morallon, Emilia
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Flores-Lasluisa, Jhony Xavier|||/items/6f146453-a961-4a3a-b897-ea7721edb6db
Manganese-based materials can catalyze the oxygen reduction reaction (ORR), although their activity is known to depend on the crystalline phases and on the concentration of surface-active species. In the present study, we have optimized these two parameters to obtain improved catalysts for ORR. A sol-gel method was used to synthesize LaMnO3-manganese oxides composites with different lanthanum-to-manganese atomic ratios. The synthesized materials, which can be described as La1-xMnOz, were tested under ORR conditions and characterized by several physicochemical techniques such as SEM, XPS, EDX or XRD. It was found that the concentration of lanthanum governs the formation of different crystal phases and determines the crystallite size. Besides, high values of x tend to increase the surface concentration of manganese and therefore to produce more active sites for ORR. Among the materials analysed, La0.6MnOz mixed with carbon black (Vulcan) showed the best electrocatalytic performance. The high tolerance to methanol makes this electrocatalyst a promising alternative to substitute Pt-based materials in alkaline electrolytes.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

A novel ferrocenic copper(II) complex Salen-like, derived from 5-chloromethyl-2-hydroxyacetophenone and N-ferrocenmethylaniline: Design, spectral approach and solvent effect towards electrochemical behavior of Fc+/Fc redox couple

  • Ouennoughi, Yasmina
  • Karce, Houssam Eddine
  • Aggoun, Djouhra
  • Lanez, Touhami
  • Ruiz-Rosas, Ramiro
  • Bouzerafa, Brahim
  • Ourari, Ali
  • Morallon, Emilia
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
This paper reports the synthesis, spectroscopic characterizations and electrochemical behavior of the obtained tetradentate copper (II)-Schiff base complex with its two wings as ferrocenylaniline moieties. This new ferrocenic derivative with two ferrocenylaniline entities surrounding the copper (II)-Salen complex (5) was synthesized by reacting N-ferrocenmethyl-N-phenyl-5-aminomethyl-2-hydroxyacetophenone (3) with one half equivalent of 1,2-diaminoethane in absolute ethanol. As for the intermediates involved in this synthetic sequence, the compound (3) was prepared in tetrahydrofuran (THF) by reacting N-ferrocenmethylaniline (2) with 5-chloromethyl-2-hydroxyacetophenone (1) in presence of sodium hydrogenocarbonate (NaHCO3). The compound (3) condensed on the diamine yields the Schiff base ligand (4). Under a nitrogen atmosphere and stirring at 50 °C, the ligand dissolved in absolute ethanol with stoichiometric amount of copper acetate monohydrate (Cu(COOCH3)2·H2O) formed the expected tetradentate Cu(II)-Schiff base complex (5) after 6 h of reaction. All these synthesized compounds gave yields varying from 50 to 90%. Their purities were estimated from elemental analysis while the molecular structures were elucidated with FT-IR, UV–Vis, 1H- and 13C- NMR. For the obtained copper complex, it is tetracoordinated in a distorted square planar environment with two nitrogen and two oxygen atoms as donor sites. The electrochemical behaviors of the synthesized compounds were explored using cyclic voltammetry. This investigation showed an important anodic shifting of the Epc and Epa potential waves for the Fc+/Fc redox couple of compound (3) in dichloromethane (DC) medium, compared to other polar media like acetonitrile (AN), dimethylformamide (DMF) and dimethylsulfoxide (DMSO). This behavior was also observed for the tetradentate copper (II)-Salen complex with its different metallic centers.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Carbon Material and Cobalt-Substitution Effects in the Electrochemical Behavior of LaMnO3 for ORR and OER

  • Flores-Lasluisa, Jhony Xavier
  • Huerta Arráez, Francisco
  • Cazorla-Amorós, Diego
  • Morallon, Emilia
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Flores-Lasluisa, Jhony Xavier|||/items/6f146453-a961-4a3a-b897-ea7721edb6db
LaMn1−xCoxO3 perovskites were synthesized by a modified sol-gel method which incorporates EDTA. These materials’ electrochemical activity towards both oxygen reduction (ORR) and oxygen evolution reactions (OER) was studied. The cobalt substitution level determines some physicochemical properties and, particularly, the surface concentration of Co and Mn’s different oxidation states. As a result, the electroactivity of perovskite materials can be tuned using their composition. The presence of cobalt at low concentration influences the catalytic activity positively, and better bifunctionality is attained. As in other perovskites, their low electrical conductivity limits their applicability in electrochemical devices. It was found that the electrochemical performance improved significantly by physically mixing with a mortar the active materials with two different carbon black materials. The existence of a synergistic effect between the electroactive component and the carbon material was interpreted in light of the strong carbon–oxygen–metal interaction. Some mixed samples are promising electrocatalysts towards both ORR and OER.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Metal oxide Perovskite-Carbon composites as electrocatalysts for Zinc-air batteries. Optimization of ball-milling mixing parameters

  • García-Rodríguez, Mario
  • Flores-Lasluisa, Jhony Xavier
  • Cazorla-Amorós, Diego
  • Morallon, Emilia
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • García-Rodríguez, Mario|||/items/4e75ee7c-2337-493c-b5d4-048aa25f8fef
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Flores-Lasluisa, Jhony Xavier|||/items/6f146453-a961-4a3a-b897-ea7721edb6db
Zn-air batteries (ZABs) are promising electrochemical devices to store energy. Metal oxide perovskites mixed with carbon materials are highlighted as interesting materials for this application because of their appropriate bifunctional performance in oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). The interaction between both components of the electrocatalyst is important in the bifunctional electrocatalytic activity, and the mixing method plays an important role in this interaction. Then, different mixing methods have been studied in this work (ball-milling, mortar and manual shaking). The use of different physicochemical techniques such as temperature programmed desorption (TPD), temperature programmed reduction (TPR) and X-ray photoelectron spectroscopy (XPS) in the materials characterization, allows us to conclude that the mixing method strongly influences the particle size and the interaction between both components, which determine the final electrocatalytic activity. The materials prepared by ball-milling displayed the best performance. Herein, the experimental conditions were optimized to obtain electrocatalysts with enhanced electrocatalytic activity for ORR and OER. Low rotating speed, air atmosphere and low ball-milling time generate electrocatalysts with a small nanoparticle size, more homogeneous and with a higher interaction between both components, which enhances electron transfer, and consequently, the overall oxygen-involved reactions. The best electrocatalyst obtained was studied as air-electrode in a Zn-air battery and it was compared to a commercial Pt/C electrocatalyst, obtaining higher cyclability (55.2 vs. 51.7%) for 30 h, and higher energy density at 5 mA/cm2 (764 mAh/g vs. 741 mAh/g).
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Transition metal oxides with perovskite and spinel structures for electrochemical energy production applications

  • Flores-Lasluisa, Jhony Xavier
  • Huerta Arráez, Francisco
  • Cazorla-Amorós, Diego
  • Morallon, Emilia
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Flores-Lasluisa, Jhony Xavier|||/items/6f146453-a961-4a3a-b897-ea7721edb6db
Transition metal oxide-based materials are an interesting alternative to substitute noble-metal based catalyst in energy conversion devices designed for oxygen reduction (ORR), oxygen evolution (OER) and hydrogen evolution reactions (HER). Perovskite (ABO3) and spinel (AB2O4) oxides stand out against other structures due to the possibility of tailoring their chemical composition and, consequently, their properties. Particularly, the electrocatalytic performance of these materials depends on features such as chemical composition, crystal structure, nanostructure, cation substitution level, eg orbital filling or oxygen vacancies. However, they suffer from low electrical conductivity and surface area, which affects the catalytic response. To mitigate these drawbacks, they have been combined with carbon materials (e.g. carbon black, carbon nanotubes, activated carbon, and graphene) that positively influence the overall catalytic activity. This review provides an overview on tunable perovskites (mainly lanthanum-based) and spinels featuring 3d metal cations such as Mn, Fe, Co, Ni and Cu on octahedral sites, which are known to be active for the electrochemical energy conversion.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Affinity of Electrochemically Deposited Sol–Gel Silica Films towards Catecholamine Neurotransmitters

  • Porcel-Valenzuela, María
  • Huerta Arráez, Francisco
  • Morallon, Emilia
  • Montilla, Francisco
  • Montilla, Francisco|||/items/b1740d15-1da3-4527-98a4-f6800cea0928
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
Dopamine, norepinephrine, and epinephrine neurotransmitters can be detected by electrochemical oxidation in conventional electrodes. However, their similar chemical structure and electrochemical behavior makes a difficult selective analysis. In the present work, glassy carbon electrodes have been modified with silica layers, which were prepared by electroassisted deposition of sol–gel precursors. These layers were morphologically and compositionally characterized using different techniques, such as field emission scanning electron microscopy (FESEM), TEM, FTIR, or thermogravimetric analysis–mass spectrometry (TG-MS). The affinity of silica for neurotransmitters was evaluated, exclusively, by means of electrochemical methods. It was demonstrated that silica adsorbs dopamine, norepinephrine, and epinephrine, showing different interaction with silica pores. The adsorption process is dominated by a hydrogen bond between silanol groups located at the silica surface and the amine groups of neurotransmitters. Because of the different interaction with neurotransmitters, electrodes modified with silica films could be used in electrochemical sensors for the selective detection of such molecules.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Strategies to Enhance the Performance of Electrochemical Capacitors Based on Carbon Materials

  • Salinas-Torres, David
  • Ruiz-Rosas, Ramiro
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Salinas-Torres, David|||/items/351ed20b-cc25-463c-bf78-b64d35945503
The increasing worldwide energy consumption has contributed to both the vast growth of greenhouse emissions from carbon-containing fuels-based sources (coal, petroleum, etc.) and the depletion of the aforementioned sources. Given this scenario, the development of inexpensive and high-performing energy storage devices, which have the least possible environmental impact, is needed. At this point, electrochemical capacitors (ECs) or supercapacitors are a particular alternative or complementary option to batteries and fuel cells (FCs). ECs present high power output and long cycle life, but little power density compared to conventional or Lithium-ion batteries. Therefore, ECs are going to play a pivotal role, not only in portable electronic devices, but also to provide power density in hybrid electric vehicles. Many efforts have been focused on improving the energy output of ECs, although its enhancement keeping the high power density is still the cornerstone of most investigations. Many studies have been conducted toward the development of electrode materials such as metal oxides, conducting polymers or novel carbons. Nevertheless, they have shown important shortcomings to be implemented (i.e., high cost, low electrical conductivity, poor stability, etc.). Recent studies put the spotlight on nitrogen-containing carbon materials as candidates to improve the ECs performance in terms of energy. Optimizing the ECs configuration (asymmetric and hybrid) is another approach reported to tackle the challenge. Additionally, it is important to mention that the design of carbon materials obtained from inexpensive precursors lately attracted the attention of the research community. This review compiles works performed in our research group over the last years. The effect of nitrogen groups present in the carbon network on the capacitance will be reported and the study of asymmetric configuration to enhance de energy density will be discussed, either opening the potential window or by increasing the capacitance. Moreover, a lignin-based ECs will be described as an environmentally friendly approach. Finally, perspective and conceivable research guidelines in order to hurdle the challenges proposed to implement the carbon materials in the field of ECs will be addressed.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Bentonite Modified Carbon Paste Electrode as a Selective Electrochemical Sensor for the Detection of Cadmium and Lead in Aqueous Solution

  • Ourari, Ali
  • Tennah, Farid
  • Ruiz-Rosas, Ramiro
  • Aggoun, Djouhra
  • Morallon, Emilia
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
This work describes the use of a carbon paste electrode (CPE) modified with a Bentonite clay (Maghnite) as an electrochemical non-pollutant, selective and low cost sensor for Cadmium and Lead detection in aqueous solution. The physico-chemical properties of the clay mineral were analysed by X-Ray Fluorescence analysis (XRF), Powder X-ray diffraction (XRD), Thermogravimetric analysis (TG) and N2 adsorption isotherm. The square wave anodic stripping voltammetry (SWASV) has been used in which the different electrochemical parameters have been studied. The optimal preconcentration pH and Maghnite-CPE content were found to be 3.4 and 14% w/w respectively. Under these optimized conditions and at a preconcentration time of 5 min, the response of the electrode was linear with analytes concentration in the ranges from 1 to 30 μmol/L for Cadmium and 0.1 to 30 μmol/L for Lead with limit of detection (LOD) values of 0.16 μmol/L and 0.30 μmol/L for Cadmium and Lead respectively.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Enhanced Adsorptive Properties and Pseudocapacitance of Flexible Polyaniline-Activated Carbon Cloth Composites Synthesized Electrochemically in a Filter-Press Cell

  • Quijada Tomás, César
  • Leite-Rosa, Larissa
  • Berenguer Betrián, Raúl
  • Bou-Belda, Eva
  • Berenguer Betrián, Raúl|||/items/660b8462-63ec-4910-98e0-ac425e6bd7a6
Electrochemical polymerization is known to be a suitable route to obtain conducting polymer-carbon composites uniformly covering the carbon support. In this work, we report the application of a filter-press electrochemical cell to polymerize polyaniline (PAni) on the surface of large-sized activated carbon cloth (ACC) by simple galvanostatic electropolymerization of an aniline-containing H2SO4 electrolyte. Flexible composites with different PAni loadings were synthesized by controlling the treatment time and characterized by means of Scanning Electron microscopy (SEM), X-Ray Photoelectron Spectroscopy (XPS), physical adsorption of gases, thermogravimetric analysis (TGA), cyclic voltammetry and direct current (DC) conductivity measurements. PAni grows first as a thin film mostly deposited inside ACC micro- and mesoporosity. At prolonged electropolymerization time, the amount of deposited PAni rises sharply to form a brittle and porous, thick coating of nanofibrous or nanowire-shaped structures. Composites with low-loading PAni thin films show enhanced specific capacitance, lower sheet resistance and faster adsorption kinetics of Acid Red 27. Instead, thick nanofibrous coatings have a deleterious effect, which is attributed to a dramatic decrease in the specific surface area caused by strong pore blockage and to the occurrence of contact electrical resistance. Our results demonstrate that mass-production restrictions often claimed for electropolymerization can be easily overcome.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Copper-Doped Cobalt Spinel Electrocatalysts Supported on Activated Carbon for Hydrogen Evolution Reaction

  • Flores-Lasluisa, Jhony Xavier
  • Quílez-Bermejo, Javier
  • Ramírez-Pérez, Ana Cristina
  • Huerta Arráez, Francisco
  • Cazorla-Amorós, Diego
  • Morallon, Emilia
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Flores-Lasluisa, Jhony Xavier|||/items/6f146453-a961-4a3a-b897-ea7721edb6db
The development of electrocatalysts based on the doping of copper over cobalt spinel supported on a microporous activated carbon has been studied. Both copper–cobalt and cobalt spinel nanoparticles were synthesized using a silica-template method. Hybrid materials consisting of an activated carbon (AC), cobalt oxide (Co3O4), and copper-doped cobalt oxide (CuCo2O4) nanoparticles, were obtained by dry mixing technique and evaluated as electrocatalysts in alkaline media for hydrogen evolution reaction. Physical mixtures containing 5, 10, and 20 wt.% of Co3O4 or CuCo2O4 with a highly microporous activated carbon were prepared and characterized by XRD, TEM, XPS, physical adsorption of gases, and electrochemical techniques. The electrochemical tests revealed that the electrodes containing copper as the dopant cation result in a lower overpotential and higher current density for the hydrogen evolution reaction.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Relevance of the Interaction between the M-Phthalocyanines and Carbon Nanotubes in the Electroactivity toward ORR

  • González-Gaitán, Carolina
  • Ruiz-Rosas, Ramiro
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
In this work, the influence of the interaction between the iron and cobalt-phthalocyanines (FePc and CoPc) and carbon nanotubes (CNTs) used as support in the electroactivity toward oxygen reduction reaction (ORR) in alkaline media has been investigated. A series of thermal treatments were performed on these materials in order to modify the interaction between the CNTs and the phthalocyanines. The FePc-based catalysts showed the highest activity, with comparable performance to the state-of-the-art Pt-Vulcan catalyst. A heat treatment at 400 °C improved the activity of FePc-based catalysts, while the use of higher temperatures or oxidative atmosphere rendered the decomposition of the macrocyclic compound and consequently the loss of the electrochemical activity of the complex. CoPc-based catalysts performance was negatively affected for all of the tested treatments. Thermogravimetric analyses demonstrated that the FePc was stabilized when loaded onto CNTs, while CoPc did not show such a feature, pointing to a better interaction of the FePc instead of the CoPc. Interestingly, electrochemical measurements demonstrated an improvement of the electron transfer rate in thermally treated FePc-based catalysts. They also allowed us to assess that only 15% of the iron in the catalyst was available for direct electron transfer. This is the same iron amount that remains on the catalyst after a strong acid washing with concentrated HCl (ca. 0.3 wt %), which is enough to deliver a comparable ORR activity. Durability tests confirmed that the catalysts deactivation occurs at a slower rate in those catalysts where FePc is strongly attached to the CNT surface. Thus, the highest ORR activity seems to be provided by those FePc molecules that are strongly attached to the CNT surface, pointing out the relevance of the interaction between the support and the FePc in these catalysts.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

The generation of hydroxyl radicals and electro-oxidation of diclofenac on Pt-doped SnO2–Sb electrodes

  • Fernández-Aguirre, Maribel G.
  • Berenguer Betrián, Raúl
  • Beaumont, Samuel
  • Nuez, Montserrat
  • La Rosa-Toro, Adolfo
  • Peralta-Hernández, Juan Manuel
  • Morallon, Emilia
  • Berenguer Betrián, Raúl|||/items/660b8462-63ec-4910-98e0-ac425e6bd7a6
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
Pt-doped SnO2–Sb electrodes constitute promising candidates for the electrochemical abatement of refractory pollutants, but their efficacy to oxidize emerging pollutants remains uncertain. In this work, the electrochemical oxidation of diclofenac, pharmaceutical pollutant, on Pt-doped Ti/SnO2–Sb electrodes has been studied by cyclic voltammetry and galvanostatic treatment in neutral medium. In parallel, the capability of these anodes to generate hydroxyl radicals (OHs) has been analyzed by in-situ UV spectroelectrochemical measurements. For comparison purposes, the responses of Ti/SnO2–Sb and commercial Ti/Pt and BDD anodes were also evaluated. The voltammetric and electrolysis results show that the different Ti/SnO2–Sb anodes can effectively oxidize and mineralize diclofenac, so their electrochemical activity lies in between that of Ti/Pt and BDD. The incorporation of small amounts of Pt (3–13 at.%) into the SnO2–Sb coatings, despite hindering the OHs generation, enhances the kinetics and efficiency for diclofenac oxidation and mineralization. This better overall response is attributed to a synergy between diclofenac-Pt interaction and efficient OHs generation. Pt-doped Ti/SnO2–Sb electrodes are then presented as a cheaper potential alternative to BDD for treating pharmaceutics pollutants in waters.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Effect of Nitrogen-Functional Groups on the ORR Activity of Activated Carbon Fiber-Polypyrrole-Based Electrodes

  • Ramírez-Pérez, Ana Cristina
  • Quílez-Bermejo, Javier
  • Sieben, Juan Manuel
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
Polypyrrole (PPy) coatings inside the microporosity of an activated carbon fiber (ACF) were synthesized by chemical polymerization obtaining ACF-PPy composites. N-doped ACFs were prepared by carbonization of the ACF-PPy composites at two temperatures (500 and 800 °C). All the samples were characterized using different techniques (XPS, SEM, elemental analysis, physical adsorption of N2, cyclic voltammetry, etc.). The electrochemical characterization in alkaline medium shows that the N-doped ACFs have a similar specific capacitance than the pristine ACF, in spite of the lower specific surface area. The materials were used as electrodes in the oxygen reduction reaction (ORR) in alkaline medium using the rotating ring-disk electrode (RRDE) and linear sweep voltammetry (LSV) tests. It was found that the N-doped ACF material carbonized at 800 °C has higher catalytic activity than the pristine ACF. The investigation also indicates that the ORR process on the N-doped ACF materials proceeds through an indirect two-electron pathway.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Synthesis and Catalytic Properties of Modified Electrodes by Pulsed Electrodeposition of Pt/PANI Nanocomposite

  • Ourari, Ali
  • Zerdoumi, Ridha
  • Ruiz-Rosas, Ramiro
  • Morallon, Emilia
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
In this study, the modification of glassy carbon electrodes by potentiostatic pulsed deposition of platinum nanoparticles and potentiostatic pulsed polymerization of polyaniline nanofibers was investigated. During the preparation of the nano-composite materials, the control of the potentiostatic pulsed deposition and potentiostatic pulsed polymerization parameters, such as pulse potential, pulse width time, duty cycle, and platinum precursor concentration allowed the optimization of the size, shape, and distribution of the deposited Pt nanoparticles. It is noteworthy that the polymerization method, cyclic voltammetry method, or potentiostatic pulsed polymerization method show an important effect in the morphology of the deposited polyaniline (PANI) film. The obtained modified electrodes, with highly uniform and well dispersed platinum nanoparticles, exhibit good electrocatalytic properties towards methanol oxidation.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

A self-doped polyaniline derivative obtained by electrochemical copolymerization of aminoterephthalic acid and aniline

  • Dkhili, Samiha
  • López-Bernabeu, Sara
  • Huerta Arráez, Francisco
  • Montilla, Francisco
  • Besbes-Hentati, Salma
  • Morallon, Emilia
  • Montilla, Francisco|||/items/b1740d15-1da3-4527-98a4-f6800cea0928
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
The electrochemical copolymerization of aminoterephthalic acid and aniline can be achieved to yield a self-doped material showing electroactivity at physiological pH. The present study focusses on the management of the synthesis conditions to obtain a true copolymerization product and to control the relative amount of both comonomers eventually incorporated to the copolymer chain. Both, in situ FTIR spectroscopy and ex situ XPS techniques proved the successful incorporation of aminoterephthalic acid and, in parallel to other polyaniline parent derivatives, revealed the existence of redox transformations involving leucoemeraldine-emeraldine-pernigraniline transitions. The use of a high inversion potential (1.4 V/RHE) during electro-copolymerization resulted in a material enriched in aminoterephthalic acid fraction with respect to aniline, while this last component is favored at lower potentials. The pH behavior of copolymers in combination with in situ FTIR results strongly suggested that a larger content of aminoterephthalic acid (such as that obtained after deposition at 1.4 V) do not ensure an extensive self-doping process because a significant fraction of those carboxylic moieties remain inactive during the redox transformation. Instead, low inversion potentials are preferred to obtain a material with less defects and thoroughly electroactive at physiological pH.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

LaNi1-xCoxO3 perovskites for application in electrochemical reactions involving molecular oxygen

  • Flores-Lasluisa, Jhony Xavier
  • Huerta Arráez, Francisco
  • Cazorla-Amorós, Diego
  • Morallon, Emilia
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Flores-Lasluisa, Jhony Xavier|||/items/6f146453-a961-4a3a-b897-ea7721edb6db
LaNi1-xCoxO3 perovskite materials were synthesized by a sol-gel method for use in electrochemical reactions which involve molecular oxygen. The metal oxides were characterized by different physicochemical techniques and it was observed that the incorporation of Co induces some changes in the surface of the materials that affect the electrocatalytic activity. The different perovskite metal oxides were mixed with carbon black (Vulcan) to improve their electrocatalytic performance. The results from TPR and TPD techniques supported the XPS interpretation suggesting that a stronger interaction between carbon material and metal oxides can be obtained by physically mixing the two materials. This interaction improves the electron transfer and enhances the catalytic activity. Among the as-prepared materials, it was observed that the electrocatalytic performance of LaNi1-xCoxO3 perovskite/Vulcan materials is higher than that of LaNiO3/Vulcan for ORR, but similar towards OER. It is claimed that Co3+ is more catalytic for ORR, while Ni3+ favors the OER. Moreover, the presence of Co stimulates the formation of chemisorbed oxygen species, which also favor the electron transfer. Metal oxides containing both cations show higher stability, being this effect more notorious for OER. LaNi0.5Co0.5O3/Vulcan seems a suitable bifunctional catalyst for both electrochemical reactions.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Spectroelectrochemical study on the copolymerization of o-aminophenol and aminoterephthalic acid

  • Abidi, Maali
  • López-Bernabeu, Sara
  • Huerta Arráez, Francisco
  • Montilla, Francisco
  • Besbes-Hentati, Salma
  • Morallon, Emilia
  • Montilla, Francisco|||/items/b1740d15-1da3-4527-98a4-f6800cea0928
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
The electrochemical copolymerization of aminoterephthalic acid (ATA) and o-aminophenol (OAP) was carried out on platinum electrodes in acidic medium. The obtained material, poly(ATA-co-OAP), can be deposited by cyclic scanning of the potential in a wide potential range and shows significant electroactivity. However, it was observed that a copolymer with less overoxidation defects is obtained at inversion potentials where only OAP monomer (and not ATA monomer) is oxidized. The successful incorporation of unoxidized ATA monomers to the growing copolymer chain was confirmed by in situ FTIR spectroscopy and XPS, which suggested a monomer ratio close to 1:2 (ATA:POAP) within the obtained copolymer material. The redox switching of poly(ATA-co-OAP) in acidic medium involves reversible benzenoid-quinoid and phenoxazine-phenoxazone conversions but carboxylic groups do not participate actively on these transformations.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Electrocatalytical reduction of bromocyclopentane and iodobenzene using Cobalt(III) and Nickel(II) Tris- and Bis-bidentates Schiff Bases Complexes

  • Ourari, Ali
  • Alouache, Amina
  • Aggoun, Djouhra
  • Ruiz-Rosas, Ramiro
  • Morallon, Emilia
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
The following bidentate Schiff base: 2-[(4-Methoxybenzyl)iminomethyl]-phenol (HL), was employed as an asymmetric ligand in the synthesis of two mononuclear nickel(II) and cobalt(III) complexes (Ni(II)-2L and Co(III)-3L). This ligand has been synthesized via condensation of salicylaldehyde and 4-methoxybenzylamine in methanolic solution, while the both complexes result from complexation of metal(II) chloride hydrate salts with HL. These coordination compounds were structurally characterized by elemental analysis, FT-IR, UV-Vis, 1H NMR and 13C NMR spectral studies. Moreover, the electrochemical properties of both complexes were studied by cyclic voltammetry in DMF solution containing 0.1 M tetra-n-butylammonium tetrafluoroborate (Et4NBF4). This study reveals that each complex showed successively two redox couples: M(III)/M(II) and M(II)/M(I). Finally, the electrocatalytic activity of these complexes has been examined and it has been found that the both complexes worked as effective homogeneous electrocatalysts for the electroreduction of bromocyclopentane and iodobenzene using glassy carbon as working electrode.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

An Electrochemical Study on the Copolymer Formed from Piperazine and Aniline Monomers

  • Dkhili, Samiha
  • López-Bernabeu, Sara
  • Kedir, Chahineze Nawel
  • Huerta Arráez, Francisco
  • Montilla, Francisco
  • Besbes-Hentati, Salma
  • Morallon, Emilia
  • Montilla, Francisco|||/items/b1740d15-1da3-4527-98a4-f6800cea0928
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
A study on the electrochemical oxidation of piperazine and its electrochemical copolymerization with aniline in acidic medium is presented. It was found that the homopolymerization of piperazine cannot be achieved under electrochemical conditions. A combination of electrochemistry, in situ Fourier transform infrared (FTIR), and ex situ X-ray photoelectron spectroscopy (XPS) spectroscopies was used to characterize both the chemical structure and the redox behavior of an electrochemically synthesized piperazine–aniline copolymer. The electrochemical sensing properties of the deposited material were also tested against ascorbic acid and dopamine as redox probes.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Synthesis and characterization of a novel non-symmetrical bidentate Schiff base ligand and its Ni(II) complex: electrochemical and antioxidant studies

  • Bougossa, Imène
  • Aggoun, Djouhra
  • Ourari, Ali
  • Berenguer Betrián, Raúl
  • Bouacida, Sofiane
  • Morallon, Emilia
  • Berenguer Betrián, Raúl|||/items/660b8462-63ec-4910-98e0-ac425e6bd7a6
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
This paper describes the synthesis and properties of a new nitro-substituted bidentate Schiff base ligand (HL) and its nickel complex (Ni(II)-2L). Its ligand was derived from the condensation of 2′-methoxyphenyl-2-ethylamine with 5-nitro-2-hydroxybenzaldehyde. This ligand and its nickel complex were characterized through elemental analysis, UV–Vis, IR, 1H NMR and 13C NMR. The molecular structure of the nickel complex was confirmed using single-crystal X-ray diffraction. This complex crystallizes in dichloromethane in triclinic system, space group of P-1 with a = 6.6803 (2), b = 9.6702 (2), c = 12.1836 (3) and 1 formula unit in the cell. The obtained data revealed that the Ni(II) center is tetra-coordinated by two oxygen and two nitrogen atoms involving two ligands. Cyclic voltammograms of the nickel complex, recorded in DMF solutions, showed one quasi-reversible redox couple related to the Ni(II)/Ni(I) couple, demonstrating its electro-activity. This indicates a slow redox transition and/or electron exchange process, which implies that this electrochemical process is mainly diffusion-controlled. The antioxidant activity of the synthesized compounds was evaluated from the reactivity with the free radical DPPH, showing IC50 values between 0.4 and 4.5 mg/mL.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Modulation of the electrocatalytic performance of PEDOT-PSS by reactive insertion into a sol-gel silica matrix

  • Djelad, Halima
  • Huerta Arráez, Francisco
  • Morallon, Emilia
  • Montilla, Francisco
  • Montilla, Francisco|||/items/b1740d15-1da3-4527-98a4-f6800cea0928
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
Poly(3,4-ethylenedioxythiophene) doped with poly-(styrenesulfonate), PEDOT–PSS, films synthesized by electrochemical methods can be considered as poor electrocatalyst for the oxidation of ferrocene in aqueous solution. The rate of electron transfer to that redox probe decays progressively as the amount of deposited polymer increases and the true electroactive area available for the electrochemical reaction shows quite modest figures. We present here an alternative, simple way to enhance the properties of this material which uses, exclusively, electrochemical synthesis methods. The electrocatalytic performance can be significantly improved by inserting the polymer within a pre-deposited, three-dimensional porous silica matrix forming an interpenetrating hybrid material. On the one hand, the modified PEDOT-PSS shows doping levels which trebles the unmodified material. On the other, the electron transfer constant and the true electroactive area for ferrocene oxidation increased by a factor of 2 and 4, respectively.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Evaluation of herringbone carbon nanotubes-modified electrodes for the simultaneous determination of ascorbic acid and uric acid

  • Abellán-Llobregat, Alejandra
  • Vidal, Lorena
  • Rodríguez-Amaro, Rafael
  • Canals, Antonio
  • Morallon, Emilia
  • Abellán-Llobregat, Alejandra|||/items/223e5e66-b65a-4c73-bbbf-49165c1f350b
  • Canals, Antonio|||/items/4a7548bb-9862-4dd9-bee4-559e2a77eb23
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Vidal, Lorena|||/items/87ae49dd-73c8-41be-9c0c-2d3c37772793
An array of gold interdigitated microelectrodes (Au-IDA) has been modified by casting herringbone carbon nanotubes (hCNTs) producing a new electrochemical sensor suitable for the simultaneous determination of ascorbic acid (AA) and uric acid (UA) in PBS (0.25 M, pH 7.0). The sensor showed good electrocatalytic properties for both analytes with low working potentials, linear ranges between 0 and 600 μM for AA, and between 0 and 420 μM for UA. The empirical limits of detection (LODs) and the limits of quantification (LOQs) for both analytes were 15 μM and 50 μM, respectively. Moreover, UA does not interfere in the measurement of AA and vice versa. Furthermore, the presence of common analytes in physiological fluids as glucose, dopamine and epinephrine do not interfere in the quantification neither AA nor UA.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Portable electrochemical sensor based on 4-aminobenzoic acid-functionalized herringbone carbon nanotubes for the determination of ascorbic acid and uric acid in human fluids

  • Abellán-Llobregat, Alejandra
  • González-Gaitán, Carolina
  • Vidal, Lorena
  • Canals, Antonio
  • Morallon, Emilia
  • Abellán-Llobregat, Alejandra|||/items/223e5e66-b65a-4c73-bbbf-49165c1f350b
  • Canals, Antonio|||/items/4a7548bb-9862-4dd9-bee4-559e2a77eb23
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Vidal, Lorena|||/items/87ae49dd-73c8-41be-9c0c-2d3c37772793
A new portable electrochemical sensor based on 4-aminobenzoic acid-modified herringbone carbon nanotubes (hCNTs-4ABA/Au-IDA) has been developed for the simultaneous determination of ascorbic acid (AA) and uric acid (UA) in physiological fluids. AA and UA were quantified by chronoamperometry at 0.1 and 0.32 V, respectively, in phosphate buffer solution (PBS 0.25 M, pH 7.0). Significant results were obtained for the separate quantification of AA and UA, with a limit of detection (LOD) of 0.65 μM for both analytes, and sensitivities of (9.0 ± 0.4) A g−1 mM−1 and (8.8 ± 0.3) A g−1 mM−1 for AA and UA, respectively. Repeatability was studied at 50 μM for AA and UA, providing relative standard deviations (RSD) lower than 9%. Additions of glucose, dopamine and epinephrine did not interfere with the AA and UA determination. Furthermore, UA did not interfere with AA determination at 0.1 V, although AA additions increased the current recorded at 0.32 V. The method has been successfully applied to human urine, perspiration and serum samples, without significant matrix effects, which allows for the use of an external calibration and the analysis of all the matrices investigated.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Synthesis, characterization and DFT investigation of new metal complexes of Ni(II), Mn(II) and VO(IV) containing N,O-donor Schiff base ligand

  • Aggoun, Djouhra
  • Messasma, Zakia
  • Bouzerafa, Brahim
  • Berenguer Betrián, Raúl
  • Morallon, Emilia
  • Ouennoughi, Yasmina
  • Ourari, Ali
  • Berenguer Betrián, Raúl|||/items/660b8462-63ec-4910-98e0-ac425e6bd7a6
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
In this work, a bidentate Schiff base ligand (HL) containing N and O as donor heteroatoms has been used to synthesize series of new stable metal complexes of general composition of M(L)2 with M = Mn, Ni and VO. This ligand was obtained from condensation of 2-methoxybenzylamine on 2,3-dihydroxybenzaldehyde in methanolic solutions in which its complexes were obtained by mixing the corresponding metal acetate salt and the ligand in 1:2 molar ratio. The resulting three complexes have been characterized by different analytical techniques like FT-IR, UV-Vis, mass spectroscopy, thermogravimetry and cyclic voltammetry, to identify their molecular structures and redox/electrochemical properties. Moreover, the effect of the metal on the complexes electronic properties with their reactivity has also been studied by Density Functional Theory (DFT). The stable structures were optimized by using the hybrid B3LYP/6–31 G method. The spectroscopic data obtained suggest that the metal is bonded to the ligand through the phenolic-like oxygen and the imine-type nitrogen atoms. Electronic and vibrational absorption spectra of the nickel complex was found to be of square-planar geometry while square-pyramidal and octahedral geometries have been proposed for VO(IV) and Mn(II) complexes, respectively. The thermogravimetric analyses of these complexes confirmed the presence of water molecules in their structures and thermal decomposition led to the formation of metal oxides as the latest residues. The voltammogram of the Ni(II) complex suggests the existence of quasi-reversible redox system in DMSO solution.