Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Replication data for Characterization of new silicon carbide neutron detectors with thermal and fast neutrons, Pérez, M., Zamorano, F., Fleta, C., Fernández, B., Guerrero, C., Godignon, P.,Pellegrini, G., Pérez-Maroto, P., Guardiola, C. (2024, December). Characterization of new silicon carbide neutron detectors with thermal and fast neutrons [Data management plan]; versión 1

  • Pérez, Martín
  • Zamorano, Felipe
  • Fleta, Celeste
  • Fernández, Begoña
  • Guerrero, Carlos
  • Godignon, Philippe
  • Pellegrini, Giulio
  • Pérez-Maroto, Pablo
  • Guardiola Salmerón, Consuelo
There will not be restrictions to use the generated data after its publication, but external users will be asked to cite the source and/or the papers properly, and the redistribution of the data must be authorized by the researcher/supervisor. The identity of the person accessing the data will be ascertained with the following questionnaire, there won't be a need for a data access committee., Raw data obtained with SiC neutron detectors for the paper: "Characterization of new silicon carbide neutron detectors with thermal and fast neutrons”, European Union Horizon 2022 research and innovation programme under the Marie Sklodowska Curie grant agreement N◦ 101106191 [SiCNeutronFlash]. Consejo de Seguridad Nuclear (CSN) under the project Subvenciones 2022 SUB-08. Spanish Ministry of Science, Innovation and Universities grant number CEX2023-001397-M, and by the European Union’s ERDF program (MCIN/AEI/10.13039/501100011033/) ‘‘A way of making Europe’’ under grant references RTC-2017-6369-3 (FEDER/EU), and PID2021-124660OB-C22., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Replication data for Out-of-field thermal neutron characterization with thin 3D-silicon detectors in Varian TrueBeam and Elekta Synergy LINACs, Zamorano, Felipe; 2025; Out-of-field thermal neutron characterization with thin 3D-silicon detectors in Varian TrueBeam and Elekta Synergy LINACs [Data management plan]; Versión 1.0.

  • Pérez, Martín
  • Zamorano, Felipe
  • Muñoz-Montplet, Carles
  • Jurado-Bruggeman, Diego
  • Bianchini, Sebastián
  • Blostein, Juan Jerónimo
  • Lipovetzky, José
  • Fleta, Celeste
  • Guardiola Salmerón, Consuelo
There will not be restrictions to use the generated data after its publication, but external users will be asked to cite the source and/or the papers properly, and the redistribution of the data must be authorized by the researcher/supervisor., Most relevant data obtained for the Varian TrueBeam (TB) 15 MV with flattening filter (FF), related to the paper: "Out-of-field thermal neutron characterization with thin 3D-silicon detectors in Varian TrueBeam and Elekta Synergy LINACs”, CSIC PIE Incorporación CT (2024ICT157); María de Maeztu Unit of Excelence CEX2023-001397-M/AEI/10.13039/501100011033; Marie Sklodowska-Curie 101106191; Spanish Nuclear Safety Council (CSN) 2022 SUB-08, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Production and characterization of deuterated bacterial nanocellulose

  • Muñoz Juan, Amanda
  • Diaz, Daniela
  • Marin Ortega, Judith
  • Murugarren, Nerea
  • Campoy Quiles, Mariano
  • Zamorano, Felipe
  • Guardiola, Consuelo
  • Pérez, Martín
  • Laromaine, Anna
“Production and characterization of deuterated bacterial nanocellulose“ CSIC digital repository collects the data published in RSC Applied Polymers in 2026 with the title “Engineering Deuterated Bacterial Cellulose via Biosynthesis for Neutron Applications” in accordance with the data availability statement of the journal. The project aimed to produce deuterated bacterial nanocellulose (dBNC) using the “film to film” protocol to reduce time and costs. The second objective was to characterize the deuterated bacterial nanocellulose films using various physicochemical techniques (FTIR, NIR, Raman, and SR-µFTIR). These techniques demonstrated the homogeneous incorporation of deuterium into the chemical structure of bacterial nanocellulose (BNC). Finally, natural and deuterated BNC were irradiated with neutrons to determine whether neutrons interact differently with deuterated BNC, paving the way for future applications of dBNC in neutron-based technologies. The data in this repository support the results presented in the publication and are organized in order of appearance: 1.-Film to Film protocol for bacterial cellulose deuteration. It summarizes the materials and steps to produce dBNC. 2.-Table1_Absorbance values. Absorbance values at each wavelength, the formula used to calculate, and the ratios (average and standard deviation). 3.-FTIR_Figure2A. FTIR spectra used for the graphic in Figure 2.A. Equipment and conditions are also described. 4. X-Ray_Figure2B. Data, equipment, and conditions for Figure 2B. 5.-NIR spectra_Figure2C. NIR spectra presented in Figure 2.C. The integrity area for each region used to calculate the crystallinity index (CRNIR) is also collected here. 6.-ZetaPotentialData. Measurements were performed to analyze the surface charge of BNC and dBNC fibers. 7.-Figure 3 RamanData. Folder with the data, equipment, and conditions used for the characterization of dBNC. 8.-SR-uFTIR_Figure4. Data, equipment, and conditions for SR-µFTIR data obtained at ALBA Synchrotron. 9.-Figure5. Neutron interaction data. Information about neutrons' interaction with BNC and dBNC, and the simulations performed at the HISPaNoS facility of the National Accelerator Center (CAN) in Sevilla. The data is presented in text files (.txt) and spreadsheets (.csv). We recommend using text editors (such as Notepad, Wordpad), MS Word or Standard PDF viewers for text files. Numerical data is presented in a spreadsheet (.csv), and we recommend using MS Excel software. The methodology is explained in detail in the accompanying publication. The equipment characteristics, software, and measurement conditions are included in each file., SR-µFTIR experiments were performed at the BL01-MIRAS beamline at ALBA Synchrotron with the collaboration of ALBA staff (ID:2020094625). We are grateful to Agustin Mihi (ICMAB-CSIC) for providing access to the spectrometer, supervising the measurements, and guiding in data analysis. This research was supported by the Spanish Ministry of Science and Innovation through the RTI2018-096273-B-I00 and PID2021-122645OB-100 projects, ‘Severo Ochoa’ Program for Center of Excellence in R&D (CEX2019-000917), the Generalitat de Catalunya (2017SGR765 grant). A.M.J. acknowledges the Ph.D. scholarship (FPU18/05190) in the framework of the Biotechnology Ph.D. program of the UAB. A.M.J. and A.L. participate in the Spanish National Research Council (CSIC) interdisciplinary platform for sustainable plastics towards a circular economy (SusPlast), the Aerogels COST ACTION (CA 18125), the EPNOE network, Conexión Nanomedicina del CSIC, and Red Nanocare 2.0. M.P. thanks funding from the European Union Horizon 2022 research and innovation program under the Marie Sklodowska-Curie grant agreement N◦ 101106191. C.G. acknowledges the Subvenciones 2022 SUB-08 program from the Spanish Nuclear Safety Council (CSN) and the Spanish government through the ‘María de Maeztu Unit of Excellence’ accreditation (CEX2023-001397-M). Finally, the authors would like to express their gratitude to ICMAB-CSIC and CNA for their technical support., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., "1.-Film to Film protocol for bacterial cellulose deuteration. 2.-Table1_Absorbance values. 3.-FTIR_Figure2A. 4. X-Ray_Figure2B. 5.-NIR spectra_Figure2C. 6.-ZetaPotentialData. 7.-Figure 3 RamanData. 8.-SR-uFTIR_Figure4. 9.-Figure5. Neutron interaction data. ", Peer reviewed