Pasar al contenido principal

CATALIZADORES Y ELECTRODOS AVANZADOS BASADOS EN MATERIAS PRIMAS NO CRITICAS PARA PILAS DE COMBUSTIBLE, ELECTROLIZADORES Y BATERIAS METAL-AIRE

PID2020-115848RB-C21

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supporting Information for Transformation of CoFe2O4 spinel structure into active and robust CoFe alloy/N-doped carbon electrocatalyst for oxygen evolution reaction [Dataset]

  • Gebreslase, Gebrehiwet Abrham
  • Martínez Huerta, M. Victoria
  • Sebastián del Río, David
  • Lázaro Elorri, María Jesús
Under a Creative Commons license CC-BY 4.0, Figure S 1. SEM images of (a) CoFe/NC10% , (b) CoFe/NC20% , and (c) CoFe/NC40%. Figure S 2.TEM images of (a) CoFe/NC10% , (b) CoFe/NC20% , and (c) CoFe/NC40%. Figure S 3. Particle size distribution of the various electrocatalyst: (a) CoFe2O4, (b) CoFe/NC10% , (c) CoFe/NC20% ,(d) CoFe/NC30% , and (e) CoFe/NC40% . Table S 1. Amount of CoFe alloys and oxides in the composite samples, determined from the XRD analysis. Figure S 4. XPS high resolution spectra of (a) Fe 2p, (b) Co 2p, for all electrocatalysts. Table S 2. XPS analysis results of the electrocatalysts. Table S 3. Elemental composition of the prepared electrocatalysts. Table S 4. Specific capacitance and ECSA values for the various eletrocataysts. Table S 5. Charge transfer resistance (Rct) and solution resistance (Rs) determined from EIS measurement. Figure S 5. ECSA-normalized polarization curve., Financial support from the European Union's Horizon 2020 Research and Innovation programme under the Marie Skłodowska-Curie Actions-Innovative Training Networks (MSCA-ITN) Grant Agreement 813748 are gratefully acknowledged. The authors wish to acknowledge the grants PID2020-115848RB-C21 and PID2020-115848RB-C22 funded by MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Appendix. Supplementary materials for Investigation of the properties influencing the deactivation of iron electrodes in iron-air batteries [Dataset]

  • Villanueva, Nicolás
  • Alegre Gresa, Cinthia
  • Rubín, Javier
  • McKerracher, Rachel
  • Ponce de León, Carlos
  • Figueredo-Rodríguez, H. A.
  • Lázaro Elorri, María Jesús
S1.- Electrode manufacturing scheme: Figure S1. Scheme of the process of electrode manufacturing. S2.- Mössbauer spectroscopy: Figure S2. Mössbauer effect spectra of the studied iron oxides with fitted components and distribution of doublets and sextets as explained in the manuscript. Table S1. Fitted parameters of the Mössbauer spectra using WinNormos software. Isomer shifts (δ) given with respect to α-Fe. Errors in brackets. For distributions, the average value of δ is given. Max1 and max2 indicate the maxima in the distribution values of quadrupole splitting ∆ (doublets) or hyperfine field Bhf (sextets). S3.- Determination of crystallite size: The size of the crystallites of each phase, hematite and maghemite, was determined as follows. The powder-diffractograms were fitted by the Rietveld method using FullProf software. In the fits we used the Thompson-Cox-Hastings (TCH) pseudo-Voigt shape for reflections. Instead of the full width of the reflection and pseudo-Voigt mixing parameter, the parametrization of the TCH pseudo-Voigt function allows to calculate the Gaussian and Lorentzian widths, which can be readily identified with crystallite-size effects, microstrains and instrumental resolution broadening. The integral breadth corresponding to size effects finally gives the crystallite size through the Scherrer formula, thus excluding contributions from the instrumental resolution. No strain contribution to the reflections broadening was considered in the present case. Table S2. Relative molar fractions of iron in hematite and maghemite in %, assuming identical recoilless fractions for both oxides. The values for Fe2O3-TAR-N2 were obtained by fitting the distribution of hyperfine values above 45 T with two Gaussians. The area of the Gaussian centered at ≈51 T yields the contribution of hematite; the rest of the distribution is then assigned to maghemite. S4.- Nitrogen physisorption: Figure S3. Nitrogen physisorption isotherms at 77 K over a) Fe2O3-TAR-air and S-Fe2O3-TAR-air, b) Fe2O3-TAR-N2 and S-Fe2O3-TAR-N2, and c) Fe2O3-SHX-air. S5.- XPS spectra: Figure S4. XPS spectra of samples: a) Fe2O3-TAR-air, b) S-Fe2O3-TAR-air, c) Fe2O3-TAR-N2, d) S-Fe2O3-TAR-N2, and e) Fe2O3-SHX-air. Carbon percentages are overestimated because of adventitious carbon. Figure S5. XPS spectra of orbitals Fe2p (left) and S2p (right) of samples: a) S-Fe2O3-TAR-air, and b) S-Fe2O3-TAR-N2. Figure S6. XPS spectra of orbital O1s of samples: a) Fe2O3-TAR-air, b) S-Fe2O3-TAR-air, c) Fe2O3-TAR-N2, d) S-Fe2O3-TAR-N2, and e) Fe2O3-SHX-air. S6.- FESEM and TEM/STEM images of the iron oxides: Figure S7. FESEM micrographs at 50k magnification of iron oxides a) Fe2O3-TAR-air, b) S-Fe2O3-TAR-air, c) Fe2O3-TAR-N2, d) S-Fe2O3-TAR-N2, and e) Fe2O3-SHX-air. Figure S8. TEM micrographs of iron oxides a) Fe2O3-TAR-air, b) S-Fe2O3-TAR-air. STEM images for c) Fe2O3-TAR-air, d) S-Fe2O3-TAR-air. S7.- Electrochemical reactions on the electrodes and electrodes deactivation During charge (dotted lines), all of the composites show a first plateau at around -0.95 V vs Hg|HgO, associated to the reduction of iron (III) to iron (II), and a second longer plateau where both the reduction of iron (II) to metallic iron and the HER take place at -1.18 V vs Hg|HgO. When discharging (solid lines), the plateau corresponding to the oxidation of Fe to Fe(OH)2 is visible at around -0.92 V vs Hg|HgO and the plateau of the formation of iron (III) appears between -0.75 and -0.70 V vs Hg|HgO. Two interesting facts related to all of the electrodes must be noted: first, that both discharge plateaus are roughly the same length. While the stoichiometry of the reactions indicates that two electrons are transferred in the first step and only one in the second and so, the first discharge plateau should be twice the length of the second one. This means that not all the iron (II) hydroxide molecules are reducing to metallic iron and oxidizing to Fe(OH)2 again. The second remarkable fact is that the second discharge plateau appears to be divided into two: a first shorter plateau and a second longer one. This suggests that the oxidation of Fe(OH)2 to FeOOH or Fe2O3 occurs through an intermediary, probably Fe3O4. Figure S9. Detail of the processes of charge and discharge of an iron oxide electrode. Figure S10. Model applied to the discharge capacity of electrodes a) Fe2O3-TAR-air, b) S-Fe2O3-TAR-air, c) Fe2O3-TAR-N2, and d) Fe2O3-SHX-air. Figure S11. Post-mortem XPS analyses of orbitals a) Fe2p and b) O1s of electrode Fe2O3-TAR-N2. S8.- Influence of the physical-chemical properties on rate capability The rate capability of the electrodes S-Fe2O3-TAR-air and S-Fe2O3-TAR-N2 was tested performing charge-discharge cycles at C-rates of 0.8 - 0.4 C and 1.6 C - 0.8 C. The electrode S-Fe2O3-TAR-N2, with lower porosity and surface area, is more affected by higher C-rates, as its f factor decreases from 0.962 to 0.891 when increasing the charge-discharge rates from 0.4 - 0.2 C to 1.6 - 0.8 C. This effect is not as strong in electrode S-Fe2O3-TAR-air (f factor barely decreases, from 0.976 to 0.970). Figure S12. Model applied to the discharge capacity of electrodes a) S-Fe2O3-TAR-air and, b) S-Fe2O3-TAR-N2 at higher C-rates. S9.- Additional EIS data: The equivalent circuit fitted to the Nyquist diagrams of samples Fe2O3-TAR-air and Fe2O3-TAR-N2 is the same as in Figure 7 in the main text. The Nyquist diagram and fitted parameters of Fe2O3-TAR-air show little variability, with the charge transfer resistance increasing ca. 10% after 15 cycles. Fe2O3-TAR-N2, by contrast, shows an increment of 120 mV, more than threefold. Figure S13. Nyquist diagrams of EIS tests after 1 and after 15 cycles of electrodes: a) Fe2O3-TAR-air and b) Fe2O3-TAR-N2 Table S3. Optimized parameters of equivalent circuit (Figure 7 in the main text) for the electrodes in Figure S13. S9.- Post-mortem textural characterization: Figure S14 shows the N2 physisorption obtained for two electrodes, considering a fresh electrode (without cycling) and an electrode cycled 20 times. Both of the tested electrodes (S-Fe2O3-TAR-air and S-Fe2O3-TAR-N2) showed a similar decrease in their surface area and pore volume, as the iron oxides expanded, occupying the pores of the carbon matrix. This phenomenon was investigated by Yang et al. Coincidently with what they found, the electrode S-Fe2O3-TAR-air showed a greater decline in pore size (see Table S4), from 14.1 nm to 6.8 nm, while S-Fe2O3-TAR-N2 average pore diameter increased from 13.8 nm to 16.6 nm. This indicates a better utilization and better contact between the carbon and iron phases in S-Fe2O3-TAR-air electrode, and thus, a greater stability. Figure S14. Adsorption isotherms of electrodes: a) S-Fe2O3-TAR-air, and b) S-Fe2O3-TAR-N2; before cycling and after 20 cycles. Table S4. Textural properties of the fresh and cycled electrodes.-- Under a Creative Commons license BY-NC-ND 4.0., Figure S1.- Electrode manufacturing scheme. S2.- Mössbauer spectroscopy: Figure S2. Mössbauer effect spectra of the studied iron oxides with fitted components and distribution of doublets and sextets as explained in the manuscript. Table S1. Fitted parameters of the Mössbauer spectra using WinNormos software. S3.- Determination of crystallite size: Table S2. Relative molar fractions of iron in hematite and maghemite in %, assuming identical recoilless fractions for both oxides. S4.- Nitrogen physisorption. S5.- XPS spectra: Figure S4. XPS spectra of samples. Figure S5. XPS spectra of orbitals Fe2p and S2p of samples. Figure S6. XPS spectra of orbital O1s of samples. S6.- FESEM and TEM/STEM images of the iron oxides: Figure S7. FESEM micrographs at 50k magnification of iron oxides. Figure S8. TEM micrographs of iron oxides. S7.- Electrochemical reactions on the electrodes and electrodes deactivation: Figure S9. Detail of the processes of charge and discharge of an iron oxide electrode. Figure S10. Model applied to the discharge capacity of electrodes. Figure S11. Post-mortem XPS analyses of orbitals. S8.- Influence of the physical-chemical properties on rate capability. Figure S12. Model applied to the discharge capacity of electrodes. S9.- Additional EIS data: Figure S13. Nyquist diagrams of EIS tests after 1 and after 15 cycles of electrodes. Table S3. Optimized parameters of equivalent circuit (Figure 7 in the main text) for the electrodes in Figure S13. S9.- Post-mortem textural characterization: Figure S14. Adsorption isotherms of electrodes, before cycling and after 20 cycles. Table S4. Textural properties of the fresh and cycled electrodes., The authors wish to acknowledge Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación (MCIN/AEI/10.13039/501100011033) for the PID2020-115848RB-C21 grant. The authors also thank the European Union and the NextGeneration EU program for the funding on grant TED2021-130279A-I00. Authors also acknowledge Gobierno de Aragón (DGA) for the financial support to Grupo de Conversión de Combustibles (T06_20R). N. Villanueva acknowledges also DGA for his pre-doctoral contract., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supplementary data for Single atom Cu-N-C catalysts for the electro-reduction of CO2 to CO assessed by rotating ring-disc electrode [Dataset]

  • Pérez Rodríguez, Sara
  • Gutiérrez Roa, Manuel
  • Giménez Rubio, Ana Cristina
  • Ríos Ruiz, D.
  • Arévalo-Cid, Pablo
  • Martínez Huerta, M. Victoria
  • Zitolo, Andrea
  • Lázaro Elorri, María Jesús
  • Sebastián del Río, David
Under a Creative Commons license by-nc-nd 4.0, Fig. S1. STEM (left) and TEM (right) images of Cu-N-C-Ac2 acquired using a Tecnay F30 microscope (300 kV). Fig. S2. XRD pattern of Cu-N-C-Ac2-3h obtained using the same experimental details than for Cu-N-CAc2 but with a lixiviation treatment of 3 hours. Fig. S3. N1s XPS spectra of the Cu-N-C. The material Cu-N-C-Ac1-BPT before the two-step post-treatment (acid leaching and 2nd carbonization) is also included for comparison purposes. Fig. S4. Effect of the two-step post-treatment (acid leaching and 2nd carbonization) on the nitrogen adsorption-desorption isotherms for Cu-N-C-Ac1. Fig. S5. Correlation between the Cu oxidation state and the energy position of the XANES spectrum, determined as the first maximum of the first derivative spectrum of Cu-N-C-Ac0.5 (red circle) and different copper reference compounds (black circles).Fig. S6. Variation with time of pH of the electrolyte (0.1 M KHCO3 aqueous solution) as a function of CO2 partial pressure. Balance with an inert gas for the equilibrium CO2 (aq) + H2O ↔ HCO3– + H+, pKa = 6.4, room temperature, 1 atm total pressure. Fig. S7. Oxidation of formic acid and methanol at the Pt ring of an RRDE, disc turned off, 1600 rpm. Fig. S8. Comparison of the CV in 0.1 M KHCO3 saturated with N2 (blue curve), methane oxidation voltammogram after saturation of the electrolyte with CH4 at the open circuit potential (red curve) and CH4 stripping voltammogram (Ead = 0.4 V vs. RHE, green curve) at the Pt ring of an RRDE, disc turned off, 1600 rpm. CV conditions from 0.05 to 1.6 V vs. RHE, 50 mV s-1. Room temperature. Fig. S9. CVs of the disc at 50 mV s-1 and 1600 rpm in CO2-saturated 0.1 M KHCO3 of Cu-N-C catalysts. Fig. S10. Chronoamperometric experiments at the disc for the Cu-N-C catalysts. Electrolyte: Fig. S11. CVs at the platinum ring for disc potentials reported in the legend. Table S1. Bulk chemical composition (wt. %) from EA and ICP of Cu-N-C electrocatalysts before and after the two-step post-treatment (acid leaching and 2nd carbonization). Table S2. N content (at. %) from XPS of the Cu-N-C electrocatalysts. Relative areas (at. %) of the deconvoluted peaks of N1s. Table S3. Textural parameters of Cu-N-C electrocatalysts. Table S4. CO, CH4 and C2H4 formation rate (mmol g-1 h-1) at selected applied potentials (V vs. RHE) and molar H2/CO ratio. Product analysis in a H-type electrochemical cell.  , Authors acknowledge Grant PID2020-115848RB-C21 “STORELEC” project, and TED2021-129694B-C22 “DEFY-CO2” project funded by MCIN/AEI/10.13039/501100011033. They also acknowledge LMP253_21 project funded by Gobierno de Aragón. Sara Pérez-Rodríguez thanks Grant IJC2019-041874-I funded by the MCIN/AEI/10.13039/501100011033. Ana Cristina Giménez thanks CSIC for her JAE Intro ICU 2021-ICB-04 grant. David Ríos-Ruiz acknowledges the Y2020/EMT-6419 “CEOTRES” project funded by the Comunidad Autonoma de Madrid., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Appendix A. Supplementary data for Bifunctional TiCo electrocatalysts based on N-doped graphene cryogels for the oxygen evolution and reduction reactions [Dataset]

  • Luque-Centeno, José Manuel
  • Martínez Huerta, M. Victoria
  • Sebastián del Río, David
  • Baglio, Vincenzo
  • Lázaro Elorri, María Jesús
Under a Creative Commons license BY 4.0 deed., Table S1. Raman shift (cm-1) of the G, D, D’ and D’’ from Raman spectra deconvolution and ID/IG intensity ratio. Table S2. Surface carbon, oxygen, nitrogen, cobalt and titanium contents and C/N, Co/N and Ti/N ratios calculated by XPS of the electrocatalysts and the relative content (%) of the deconvoluted peaks for N1s, Co2p and Ti2p. Figure S1. High-resolution C1s core level of NGC, Ti/NGC, Co/NGC and TiCo/NGC composites. Figure S2. LSV at 0.005 V s−1 in an O2-saturated 0.1 M NaOH solution, recorded using different electrode rotating rates indicated in the legend (rpm). (A) NGC, (B) Ti/NGC, (C) Co/NGC, (D) TiCo/NGC. Figure S3. Koutecky−Levich diagrams obtained between 0.3 and 0.56 V vs RHE for each composite. (A) NGC, (B) Ti/NGC, (C) Co/NGC, (D) TiCo/NGC. Figure S4. Koutecky−Levich diagrams obtained between 0.6 and 0.78 V vs RHE for each composite. (A) NGC, (B) Ti/NGC, (C) Co/NGC, (D) TiCo/NGC., The authors wish to acknowledge the grants PID2020-115848RB-C21 and PID2020-115848RB-C22 funded by MCIN/AEI/10.13039/501100011033, and the Spanish National Research Council (CSIC) through the i-LINK + Programme (i-LINK1106)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supporting information for Effect of carbon xerogel activation on Fe−N−C catalyst activity in fuel cells [Dataset]

  • Álvarez Manuel, Laura
  • Alegre Gresa, Cinthia
  • Sebastián del Río, David
  • Napal, Pedro F.
  • Moreno Redondo, C.
  • Bailón García, Esther
  • Carrasco Marín, Francisco
  • Lázaro Elorri, María Jesús
Electrochemical characterization: Figure S3 shows the linear sweep voltammetries of the different catalysts subjected to several cycles of acid leaching/thermal treatments. Catalysts were named as Fe-N-CXG-X-Tn, where X represents the activation method (CO2, H2O and KOH) and Tn indicates the number of cycles of acid leaching/thermal treatment performed over each catalyst. The curve with the highest activity is plotted with a thicker line, to highlight the number of cycles giving rise to the most active catalyst.-- Under a Creative Commons license BY 4.0., Reaction for carbon activation with CO2: S1. Reactions for carbon activation with water vapour: S2, S3, S4, S5. Reactions that can take place during carbon activation with KOH [1]: S6, S7, S8, S9, S10, S11, S12, S13, S14. Physicochemical characterization: Figure S1 XPS high resolution O1s spectra for (a) CXG, (b) CXG-CO2 (c) CXG-H2O and (d) CXG-KOH considering 30 % Gaussian and 70% Lorentzian peak shape and Shirley background; Figure S2: XPS high resolution C1s spectra for (a) CXG, (b) CXG-CO2 (c) CXG-H2O and (d) CXG-KOH considering 30 % Gaussian and 70% Lorentzian peak shape and Shirley background; Table S1: Chemical composition determined by ICP, elemental analysis and XPS for Fe-N-CXG catalysts; Electrochemical characterization: Figure S3 Polarization curves for the ORR, in RDE at 1600 rpm in O2-saturated 0.5M H2SO4 for a) Fe-N-CXG, b) Fe-N-CXG-CO2, c) Fe-N-CXG-H2O, d) Fe-N-CXG-KOH subjected to successive cycles of acid leaching/thermal treatments indicated as Tn (n is the number of cycles performed). Figure S4 Polarization curve and power density curve for commercial Pt/C catalyst at the cathode and anode (0.2 mgPt cm-2), Nafion® NR212 membrane. Operating conditions: 80 °C; H2/O2 at λ= 1.3/1.5, 100% RH, and back pressure of 1.5 bar-gauge. Figure S5: Detail pictures of a drop of water on the surface of electrodes. a) Fe-NCXG, b) Fe-N-CXG-CO2, c) Fe-N-CXG-H2O, d) Fe-N-CXG-KOH. Figure S6. (a) Polarization curves and (b) power density curves after at the end of test (EoT), consisting of 20h operation at 0.5 V. Fe-N-CXG catalysts (4 mg cm-2) at the cathode, Nafion® NR212 membrane, and Pt40%/C (0.2 mgPt cm-2) at the anode. Operating conditions: 80 °C; H2/O2 at λ= 1.3/1.5, 100% RH, and back pressure of 1.5 bar-gauge., The authors wish to acknowledge the grant PID2020-115848RB-C21 funded by MCIN/AEI/10.13039/501100011033. This research has received funding from the European Institute of Innovation and Technology (EIT) through project EIT RM – n. 18252. Authors also acknowledge Gobierno de Aragón (DGA) for the financial support to Grupo de Conversión de Combustibles (T06_23R). L. Álvarez acknowledges also DGA for her pre-doctoral contract., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supplementary data for Building robust copper nanostructures via carbon coating derived from polydopamine for oxygen reduction reaction [Dataset]

  • Cebollada Borao, Jesús
  • Sebastián del Río, David
  • Yamasaki, Jun
  • Agúndez Rodríguez, Javier
  • Lázaro Elorri, María Jesús
  • Martínez Huerta, M. Victoria
6 figures, 2 tables.-- Under a Creative Commons license CC BY 4.0, https://creativecommons.org/licenses/by/4.0/, Figure S1. TEM images and diffraction patterns of copper, cuprite and graphite for Cu-150-NC. Figure S2. Raman Spectrum of Cu-X-NC (X= 0, 120, 150, 180). Figure S3. High resolution N1s spectra of Cu-X-NC (X= 0, 120, 150, 180). Figure S4. Nyquist plot from EIS experiments at 0.78 V vs RHE for the catalysts Cu-X-NC (X = 0, 120, 150 and 180). Figure S5. ORR polarization curves before and after accelerated stability test of catalysts Cu-0-NC, Cu-120-NC and Cu 180-NC. Figure S6. SEM images of Cu-150-NC (A) before and (B) after acceleration stability test. Table S1. Surface chemical composition (wt%) of the catalysts obtained by XPS. Table S2 Double Layer capacitance, Electrochemical Surface Area, Mass Activity and Specific Activity of the catalyst Cu-X-NC (X= 0, 120, 150 and 180) and after Accelerated stability test Cu-X-NC 10000 (X=0, 120, 150 and 180)., The authors wish to acknowledge the grants PID2020-115848RB-C21 and PID2020-115848RB-C22 funded by MCIN/AEI/10.13039/501100011033. J. Cebollada also thanks the grant PRE2018-084842 funded by MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supporting information for In situ growth of nickel phosphide on carbon felt as a promising electrocatalyst for the alkaline hydrogen evolution reaction [Dataset]

  • Gebreslase, Gebrehiwet Abrham
  • Martínez Huerta, M. Victoria
  • Sebastián del Río, David
  • Lázaro Elorri, María Jesús
Under a Creative Commons BY 4.0 license: https://creativecommons.org/licenses/by/4.0/, 1. Physicochemical characterization; Figure S1. (a)TEM image of NiP@CF, and (b,c)HAADF-EDX of NiP@CF; Figure S2. XPS survey spectra of the various samples; Figure S3. HER polarization curves comparison of NiP@CF sample at different thermal treatments; Figure S4. Cyclic voltammograms at different scan rates: (a) CF, (b) P@CF, (c)NiO@CF, (d)NiO@CF-T, and (e)NiP@CF; Figure S5. (a) SEM and (b )EDX of NiP@CF after stability measurements, Scanning electron microscopy (SEM-EDX) was conducted using an SEM Hitachi 3400N and an EDX Röntec XFlash of Si (Li). For detailed morphology observation, a high-resolution transmission electron microscope (TEM) (Tecnai F30) was utilized, operating at an accelerating voltage of 200 kV. X-ray diffraction (XRD) analyses were performed using a Bruker D8 Advance diffractometer with Cu Kα as the X-ray source, generating 1600 W. X-ray photoelectron spectra (XPS) were acquired using a VG Escalab 200R spectrometer equipped with a hemispherical electron analyzer. The XPS measurements employed Mg Kα (1253.6 eV) at 100 W with passing energy of 50 eV for the survey analysis and 20 eV for the high-resolution regions. The C 1s line at 284.6 eV was used for charge correction in all XPS spectra. Peak fitting and quantification were performed using CasaXPS software, and a Shirley-type background was applied to all peaks. A 70%/30% Gaussian/Lorentzian line shape was employed to deconvolute the high-resolution data for each component., The authors acknowledge the Grants PID2020-115848RB-C21 and PID2020-115848RB-C22 funded by MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supplementary information for Performance evaluation of poly(vinylidene fluoride)- vinyl benzyl trimethyl ammonium chloride copolymer as anion exchange membranes for fuel cell applications [Dataset]

  • Rehman, Muhammad Habib ur
  • Sebastián del Río, David
  • Napal, Pedro F.
  • Nicotera, Isabella
  • Simari, Cataldo
1 figure., Figure S1. Arrhenius plots for the water self-diffusion coefficients measurend on PVDF-VB membrane in the Cl-, HCO3- and OH- forms., M.H.R., I.N., and C.S. acknowledge financial support under the National Recovery and Resilience Plan (NRRP), Mission 4, Component 2, Investment 1.1, Call for tender No. 1409 published on September 14, 2022 by the Italian Ministry of University and Research (MUR), funded by the European Union – NextGenerationEU – Project Title UNIRE – CUP H53D23007910001, Grant Assignment Decree No. 1409 adopted on September 14, 2022 by the Italian Ministry of Ministry of University and Research (MUR). The ICB-CSIC authors (D.S. and P.F.N.) acknowledge Grant PID2020-115848RB-C21 funded by MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supplementary information for Graphene-nanofiber hybrid carbon composites as support boosting tantalum oxides activity of bifunctional oxygen reduction/evolution catalysts [Dataset]

  • Sebastián del Río, David
  • Ruiz Cornejo, Juan Carlos
  • Martínez Huerta, M. Victoria
  • Lázaro Elorri, María Jesús
Under a Creative Commons BY 4.0 license., Figure S1. Particle size distribution of Ni-based particles (from CNF growth catalyst) in the rGO-CNF1.0 nanocomposite; Figure S2. Pore size distribution curves obtained by applying BJH method to the desorption branches; Figure S3. XPS signals for Ta 4f for the different TaOx-based catalysts; Figure S4. XRD patterns for the TaOx catalysts supported on rGO-CNF composites as well as rGO and CNF (* line with multiple indexes). The dotted lines (shown only those at Bragg angles above 35º 2theta for the sake of clarity) indicate the position of different reflections and Miller indexes according to ICDD reference patterns (Na2Ta8O21 PDF#28-1137, Ta2O5 PDF#89-2843, TaO PDF#89-4772, Ni PDF#87-0712); Table S1. Lattice parameters from XRD patterns for the tantalum-related phases. The values written in bold correspond to the main component of the tantalum-based formulation., The authors acknowledge Grants PID2020-115848RB-C21 and PID2020-115848RB-C22 funded by MICIU/AEI/10.13039/501100011033, and to the Gobierno de Aragón (DGA) for the funding to Grupo de Investigación Conversión de Combustibles (T06_23R). J.C. Ruiz-Cornejo acknowledges also DGA for his PhD grant., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supplementary information for Tuning the activity and selectivity of CuPt/C catalysts for the electrochemical CO2 reduction [Dataset]

  • Gutiérrez Roa, Manuel
  • Sebastián del Río, David
  • Guzmán, Hilmar
  • Zammillo, Federica
  • Hernández, Simelys
  • Lázaro Elorri, María Jesús
  • Pérez Rodríguez, Sara
Under a Creative Commons license BY-NC 4.0., Figure S1. Particle size distribution for Cu/C, CuPt-99:1/C, and CuPt 95:5/C electrocatalysts; Figure S2. STEM images with corresponding EDX spectra showing elemental counts for Cu/C, CuPt 99:1/C, and CuPt 95:5/C electrocatalysts; Figure S3. AC-HAADF-STEM of a CuPt nanoparticles for CuPt-99:1/C and the corresponding EDX elemental mapping images where Cu and Pt are displayed as blue and yellow colours, respectively; Figure S4. High-resolution XPS spectra of the Cu 2p3/2 region for the CuPt/C catalysts and the monometallic Cu/C; Figure S5. LSVs at 10 mV s-1 of CuPt/C, Cu/C, and commercial Pt/C catalysts in N2 saturated 0.1 M KHCO3; Figure S6. Electrochemical oxidation of adsorbed species derived from CO2 (green lines) or CO (blue lines) reduction at -0.6 V vs. RHE. CVs performed in a potential window excluding CO2RR with the electrolyte saturated with N2 (black line) are also included; Figure S7. Selectivity to CO2RR products in the CuPt-90:10/C and CuPt 75:25/C catalysts at the potentials analysed; Figure S8. CO2RR stability measurements at -0.6 V vs. RHE in CO2-saturated 0.1 M KHCO3 under continuous carbon dioxide bubbling for CuPt-99:1/C and monometallic Cu/C.Table S1. (a) Surface compositions (at.% and wt.%) from XPS. (b) Relative contribution of Cu(0) + Cu(I) and Cu(II) (at.%) from the deconvolution of Cu 2p3/2 and relative contributions normalized to (Cu/(Cu+Pt))XPS. (c) Relative platinum contributions (at.%) from the deconvolution of Pt 4f and relative contributions normalized to (Pt/(Cu+Pt))XPS., Authors acknowledge Grant PID2020–115848RB-C21 “STORELEC” project funded by MICIU/AEI/10.13039/501100011033 and Grant CNS2023–144433 “ALCOELECTRO” project funded by MICIU/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”. Authors also acknowledge Gobierno de Aragón (DGA) for financially supporting Grupo de Conversión de Combustibles (T06_23R) and the project LMP253_21. Sara Pérez-Rodríguez thanks Grant IJC2019–041874-I funded by the MICIU/AEI/10.13039/501100011033. Manuel Gutiérrez-Roa acknowledges Universidad de Zaragoza, Fundación Ibercaja and Fundación CAI for the financial support IT 11/23 and Programa Iberus+ : Movilidad para doctorandos for his mobility grant. Simelys Hernández acknowledges the project CO2Synthesis (ID ROL: 67910) funded by Fondazione Compagnia di San Paolo in the Call Trapezio - Linea 1. Federica Zammillo and Mario Gallone thanks Fondazione CRT for the financial support., Peer reviewed