Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 33
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Fungal Biomass Valorization for Obtaining Functional Food-Related Materials, Valorización de biomasa fúngica para la obtención de materiales funcionales de interés en alimentación

  • Pérez Bassart, Zaida
[ES] El objetivo de esta tesis doctoral ha sido proporcionar conocimientos fundamentales y prácticos relacionados con la valorización de la biomasa de setas, para comprender la relación estructura-funcionalidad de extractos acuosos ricos en ß-glucanos, en términos de capacidad inmunorreguladora, antioxidante y antiviral, así como las propiedades tecnológicas (gelificantes y emulsionantes). El objetivo de esta tesis doctoral también ha sido explorar la viabilidad de dicha biomasa en el desarrollo de materiales compostables para el envasado de alimentos. Inicialmente, se aplicó un proceso de extracción secuencial, que implicaba varios tratamientos consecutivos tanto acuosos con y sin temperatura como alcalinos, aplicados a setas de gran consumo (P. ostreatus, L. edodes y G. frondosa), con la finalidad de comprender cómo las diferencias iniciales en la composición y la arquitectura de la pared celular afectaban a la extracción de ß-glucano. A partir de los resultados obtenidos, se analizó en profundidad la aplicación potencial de extractos acuosos, ricos en ß-glucanos, del género Pleurotus, explorando cómo la composición de los extractos y la complejidad estructural de ß-glucanos afectaban a su capacidad inmunorreguladora. Los resultados evidenciaron que tanto Pleurotus ostreatus como sus estipes mostraron los mejores resultados, con una actividad inmunoestimulante mucho mayor que las otras especies de Pleurotus exploradas. En la segunda parte de esta tesis, se evaluaron las propiedades funcionales (antivirales y antioxidantes) y tecnológicas (gelificantes y emulsionantes) de los extractos acuosos de ß-glucano, purificados y sin purificar, de Pleurotus ostreatus y sus estipes. El proceso de purificación, como era de esperar, incrementó el porcentaje en carbohidratos (con un mayor aumento en los estipes), lo que se tradujo en una mayor viscosidad y capacidad gelificante. Además, el extracto obtenido de los estipes mostró una fuerte actividad antiviral frente a norovirus murino, probablemente atribuida a la mayor complejidad estructural de sus ß-glucanos. Aunque la presencia de proteínas en los extractos acuosos de ß-glucanos potenció sus propiedades emulsionantes, esta propiedad fue dependiente de la accesibilidad de la proteína para adsorberse en la interfase O/W, lo que también afectó a la viscosidad de las emulsiones resultantes. La quitina y los ß-glucanos son dos de los principales carbohidratos de las setas, y tienen un gran potencial en la formación de materiales de envasado. En la última parte de esta tesis, se investigó la viabilidad de la biomasa de residuos de setas para desarrollar materiales de envasado de alimentos biodegradables y compostables. Los resultados mostraron que la composición de la biomasa de champiñón y las temperaturas de procesado tuvieron un impacto en las propiedades fisicoquímicas de los films desarrollados y, todas fueron biodesintegrables en condiciones de compostaje según la norma ISO 20200. Por lo tanto, esta tesis doctoral representa un importante avance en la valorización de la biomasa de setas (seta entera y estipes) y pone de relieve su idoneidad para desarrollar nuevos ingredientes funcionales y materiales de envasado para aplicaciones alimentarias y de envasado de alimentos., [CA] L'objectiu d'aquesta tesi ha sigut proporcionar els coneixements fonamentals i pràctics relacionats amb la valorització de la biomassa de bolets, per a comprendre la relació estructura-funcionalitat d'extractes aquosos rics en ß-glucans, en termes de capacitat immunoreguladora, antioxidant i antiviral, així com de les propietats tecnològiques (gelificants i emulsionants). L'objectiu d'aquesta tesi ha estat també l'exploració de la viabilitat d'aquesta biomassa pel desenvolupament de materials compostables per a l'envasat d'aliments. Inicialment, es va aplicar un procés d'extracció seqüencial, que implicava diversos tractaments consecutius, tant aquosos amb temperatura i sense, com alcalins, aplicats a bolets de gran consum (P. ostreatus, L. edodes i G. frondosa), per tal de comprendre com les diferències inicials en la composició i l'arquitectura de la paret cel·lular afectaven l'extracció de ß-glucà. A partir dels resultats obtinguts, es va analitzar en profunditat la potencial aplicació d'extractes aquosos, rics en ß-glucans, del gènere Pleurotus, explorant així com la composició dels extractes i la complexitat structural dels ß-glucans afectaven a la seua capacitat immunoreguladora. Els resultats van evidenciar que tant Pleurotus ostreatus com les seues estipes mostraren els millors resultats, amb una activitat immunoestimulant molt més gran que la obtinguda per a les altres espècies de Pleurotus explorades. A la segona part d'aquesta tesi, es van avaluar les propietats funcionals (antivirals i antioxidants) i tecnològiques (gelificants i emulsionants) dels extractes aquosos de ß-glucà, purificats i sense purificar, de Pleurotus ostreatus i les seues estipes. El procés de purificació, com calia esperar, va incrementar el percentatge en carbohidrats (amb un major augment en els estipes), cosa que es va traduir en una major viscositat i capacitat gelificant. A més, l'extracte obtingut dels estipes va mostrar una forta activitat antiviral contra norovirus murí, probablement atribuïda a la complexitat estructural més gran dels seus ß-glucans. Tot i que la presència de proteïnes en els extractes aquosos de ß-glucans va potenciar les seues propietats emulsionants, aquesta propietat va ser dependent de l'accessibilitat de la proteïna per adsorbir-se a la interfase O/W, cosa que també va afectar la viscositat de les emulsions resultants. La quitina i els ß-glucans són dos dels principals carbohidrats dels bolets, i tenen un gran potencial en la formació de materials d'envasament. Així, a la darrera part d'aquesta tesi, es va investigar la viabilitat de la biomassa de residus de bolets per desenvolupar materials biodegradables i compostables d'envasat d'aliments. Els resultats van mostrar que la composició de la biomassa de bolets i les temperatures de processament van tenir un impacte en les propietats fisicoquímiques de les pel·lícules desenvolupades i, totes elles van ser biodesintegrables en condicions de compostatge segons la norma ISO 20200. Per tant, aquesta tesi doctoral representa un important pas endavant en la valorització de la biomassa de bolets (sencers i estipes) i posa en relleu la seua idoneïtat per desenvolupar nous ingredients funcionals i materials d'envasament per a aplicacions alimentàries i d'envasat d'aliments., [EN] This doctoral thesis was aimed at providing fundamental and practical knowledge related to the valorisation of underexploited mushroom biomass, in order to understand the structure-function relationship of ß-glucan aqueous extracts in terms of immunoregulatory, antioxidant and antiviral capacity as well as technological (gelling and emulsifying) properties. It was also the aim of this PhD thesis to explore the feasibility of mushroom biomass to develop compostable food packaging materials. Initially, a sequential fractionation process, involving several consecutive cold or hot aqueous and alkaline treatments, was applied to widely consumed mushrooms (P. ostreatus, L. edodes and G. frondosa), in order to understand how the initial differences in composition and cell wall architecture affected ß-glucan extraction. Based on the results, the potential application of ¿-glucan aqueous extracts from Pleurotus genus was deeply analysed, thus exploring how the composition of the extracts and structural complexity of ¿-glucans affected their immunoregulatory capacity. The results evidenced that both Pleurotus ostreatus and its stipes showed the best results, with a much higher immunostimulant activity than the other explored Pleurotus species. In the second part of the thesis, functional (antiviral and antioxidant) and technological (gelling and emulsifying) properties of purified and unpurified¿¿-glucan aqueous extracts from Pleurotus ostreatus and its stipes were evaluated. The purification process, as expected, increased the carbohydrates content (greater in those obtained from the stipes), which resulted in a greater viscosity and gelling capacity. Furthermore, the extract obtained from the stipes showed a strong antiviral activity against murine norovirus, probably ascribed to the higher structural complexity of ß-glucans. Although the presence of proteins in the ¿-glucan aqueous extracts enhanced their emulsifying properties, it depended on the accessibility of the protein to adsorb at the O/W interphase, which also affected the viscosity of the resulting emulsions. Chitin and ß-glucans are two of the major carbohydrates of mushrooms, having a great potential in the formation of packaging materials. Thus, in the last part of this thesis, the feasibility of mushroom waste biomass to develop biodegradable and compostable food packaging materials was investigated. The results showed that the composition of mushroom biomass and the processing temperatures had an impact on the physicochemical properties of the developed films and, all of them were biodisintegrated under composting conditions according to ISO 20200. Therefore, this PhD thesis represents a significant step forward in the understanding of the discarded mushroom biomass (whole biomass and stipes) for valorisation purposes and highlights its suitability to develop new cost-efficient functional ingredients and packaging materials for food and food packaging applications., This work was performed with the financial support of the CIEN project BIOPRO from “Centro para el Desarrollo Tecnológico Industrial” (CDTI), Ministry of Science and Innovation, Government of Spain. The Accreditation as Center of Excellence Severo Ochoa CEX2021-001189-S funded by MCIN/AEI/10.13039/501100011033 is also fully acknowledged. his study forms part of the AGROALNEXT programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17. I1) and by Generalitat Valenciana. Synchrotron experiments were performed at NCD beamline at ALBA Synchrotron with the collaboration of ALBA staff (proposal 2,022,025,569). IF was supported by a postdoctoral contract grant for the requalification of the Spanish university system from the Ministry of Universities of the Government of Spain, financed by the European Union (NextGeneration EU) (MS21-006).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Transcriptomic and genetic insights into the function and mechanism of the antifungal proteins PeAfpA and PdAfpB

  • Ropero Pérez, Carolina
[ES] Los hongos fitopatógenos representan una grave amenaza para la seguridad alimentaria, agravada por la creciente resistencia a los antifúngicos convencionales. Las proteínas antifúngicas (AFPs) producidas por hongos filamentosos son proteínas pequeñas, catiónicas y ricas en cisteínas que destacan por su amplio espectro, baja toxicidad y potencial biotecnológico. El patógeno postcosecha de frutos cítricos Penicillium digitatum codifica una única AFP, PdAfpB, mientras que el principal patógeno postcosecha de frutas de pepita, Penicillium expansum, codifica tres AFPs (PeAfpA, PeAfpB y PeAfpC). A pesar del potencial de las AFPs para el control postcosecha, se desconocen muchos aspectos de su función biológica, regulación y mecanismos de acción. Esta tesis doctoral investiga el modo de acción de las proteínas antifúngicas PeAfpA y PdAfpB frente a P. digitatum, y explora su función biológica mediante la combinación de análisis transcriptómicos y de genética funcional. El análisis por RNA-Seq en P. digitatum tratado con PdAfpB, junto con un mutante nulo afpB y una cepa sobreproductora, reveló un impacto múltiple del gen afpB. Su deleción tuvo un efecto transcripcional limitado, coherente con la ausencia de producción de la proteína en la cepa parental, y sugiere un papel en la homeostasis celular. Aunque no se detectó PdAfpB en la cepa sobreproductora en las condiciones del ensayo, esta mostró una respuesta transcripcional parcialmente coincidente con la de la cepa parental expuesta a la proteína. Además, se identificó que los genes de la acetolactato sintasa y descarboxilasa, implicados en la biosíntesis de acetoína, contribuyen a la actividad inhibitoria de PdAfpB. En P. expansum, la caracterización fenotípica y el análisis transcriptómico de mutantes nulos afpA permitieron profundizar en la función de la proteína PeAfpA en su hongo productor. La mutación de afpA no afectó al crecimiento axénico, la conidiación, la virulencia, la respuesta a estrés ni la sensibilidad del hongo a las AFPs producidas por P. expansum. El análisis de RNA-Seq reveló una importante reprogramación transcripcional asociada a la producción de la proteína, incluyendo la activación de genes implicados en la remodelación de la pared celular, el metabolismo de carbohidratos y el transporte a través de la membrana, lo que sugiere una posible respuesta frente a la limitación de nutrientes. Además, se identificó la existencia de co-regulación entre los tres genes afp de P. expansum. Finalmente, los análisis transcriptómicos revelaron que la exposición de P. digitatum a la proteína exógena PeAfpA desencadena un patrón de expresión con similitudes y diferencias al activado por PdAfpB. PeAfpA activó genes implicados en homeostasis redox y respuesta a estrés, mientras que PdAfpB estimuló genes relacionados con la traducción. Ambas proteínas modularon genes asociados al metabolismo de pared celular y lípidos, y se detectó la represión de genes implicados en la biosíntesis de hidrofobinas y melanina. Solo la melanina resultó crítica para la interacción de PeAfpA con la superficie de los conidios de P. digitatum, demostrando que distintos componentes de la pared celular participan de forma diferencial en la unión a la proteína. Sin embargo, esta interacción diferencial no modificó la sensibilidad de P. digitatum a las AFPs. Asimismo, la deleción de otros genes diferencialmente expresados, incluidos aquellos implicados en metabolismo secundario, metabolismo lipídico, regulación transcripcional y ensamblaje de la pared celular, no modificó la sensibilidad del hongo a las AFPs, lo que apunta a un modo de acción multidiana tanto para PeAfpA como para PdAfpB. Para efectuar estos estudios funcionales se optimizó un protocolo de edición génica mediante CRISPR/Cas9, incrementando la eficiencia de disrupción génica del 10% a más del 80%, lo que proporciona una plataforma eficaz para estudios de genómica funcional en en patógeno de relevancia agronómica P. digitatum., Este trabajo se ha realizado en el marco del proyecto de investigación del Ministerio de Ciencia e Innovación PID2021-125858OB-I00. Agradecer también al Programa de Excelencia Severo Ochoa CEX2021-001189-S, financiado por MCIN/AEI/10.13039/501100011033 y por “ERDF, a way of making Europe”. Agradezco a la Conselleria d’Educació (Generalitat Valenciana) por haber financiado mi contrato ACIF/2021/364 para realizar este proyecto de tesis en el Instituto de Agroquímica y Tecnología de Alimentos (IATA) del Consejo Superior de Investigaciones Científicas (CSIC). Finalmente, agradecer la financiación otorgada por la Conselleria d’Educació para realizar mi estancia predoctoral (CIBEFP/2023/153) en el Westerdijk Fungal Biodiversity Institute (Utrecht, Países Bajos).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Influence of gut-to-brain neuroendocrine pathways and intestinal microbiota on energy homeostasis

  • Bullich Vilarrubias, Clara
[ES] La obesidad es un gran reto de salud pública que ha alcanzado proporciones epidémicas. El entorno "occidentalizado" en el que vivimos, caracterizado por la accesibilidad a alimentos hipercalóricos, contribuye al desequilibrio crónico entre energía ingerida y gasto energético que causan la obesidad. Las intervenciones conductuales diseñadas para la pérdida de peso tienen limitada efectividad a largo plazo, por lo que existe una urgente necesidad de desarrollar estrategias más eficaces y seguras para prevenir y tratar la obesidad y sus comorbilidades. El desarrollo de estrategias terapéuticas dirigidas al intestino para mejorar la salud metabólica requiere un conocimiento en profundidad de las vías de señalización neuroendocrina intestinal que regulan el la ingesta y el equilibrio energético. El objetivo de esta tesis ha sido profundizar en las interacciones intestino-cerebro implicadas en el control de la homeostasis energética, incluyendo los componentes endocrinos, neurales y la microbiota intestinal, en el contexto del desarrollo de la obesidad inducida por una dieta hipercalórica. En los Capítulos 1 y 2 hemos explorado nuevas funciones de las neuronas sensoriales aferentes que expresan el canal de sodio Nav1.8 en el control de la homeostasis energética, considerando las diferencias entre sexos. Hemos generado un modelo de ratón carente de las neuronas Nav1.8+ mediante ablación con toxina diftérica. En el Capítulo 1 hemos demostrado que las neuronas Nav1.8+ son indispensables para regular específicamente según el sexo las vías neurales y endocrinas implicadas en la homeostasis energética. En hembras, la ablación de estas neuronas mejora la regulación de la glucosa postprandial potenciando la señalización enteroendocrina de GLP-1 y acelera el tránsito intestinal, mientras que en machos induce resistencia al aumento de peso inducido por una dieta obesogénica. En el Capítulo 2 hemos demostrado que, en machos, la ablación de las neuronas Nav1.8+ altera el control coordinado de la ingesta i las variaciones de peso diarias, además de alterar la señalización enteroendocrina y las oscilaciones diarias de la microbiota intestinal en respuesta al estado nutricional (ayuno/ingesta), y perturbar la homeostasis del sistema inmune intestinal. En el capítulo 3, hemos usado un modelo de ratón con obesidad inducida por dieta para explorar los mecanismos por los cuales Phascolarctobacterium faecium DSM 32890, una cepa bacteriana intestinal aislada de humanos metabólicamente sanos, previene la obesidad modulando la ingesta. La administración de P. faecium reduce la ingesta calórica gracias a la hipersecreción de la hormona gastrointestinal saciante el PYY. Independientemente de sus efectos anorexigénicos, la bacteria ejerce sus beneficios metabólicos estimulando el tránsito intestinal y reduciendo la absorción intestinal de lípidos, evitando la acumulación de grasa corporal. En conclusión, esta tesis doctoral proporciona evidencia preclínica que contribuye a una comprensión más precisa de las vías neuroendocrinas que comunican el intestino y el cerebro, y del papel que tiene la microbiota intestinal en la regulación de la ingesta y el gasto energético. Destacamos la importancia de las neuronas sensoriales aferentes Nav1.8+ en la detección de estímulos intestinales por quimiorreceptores para regular el balance energético en ambos sexos, lo cual abre una nueva línea de investigación para diseñar herramientas de neuromodulación de las neuronas Nav1.8+ con el fin de prevenir y tratar los trastornos metabólicos inducidos por la dieta, de forma específica para cada sexo. También destacamos que P. faecium es una bacteria candidata como probiótico de nueva generación, ya que modula el sistema enteroendocrino del hospedador y previene la obesidad en un modelo preclínico. En conjunto, estos hallazgos proporcionan una base para el desarrollo de estrategias terapéuticas basadas en el intestino dirigidas a combatir la obesidad y comorbilidades asociadas., [CA] L'obesitat és un gran repte de salut pública que ha assolit proporcions epidèmiques. L'entorn "occidentalitzat" en el que vivim, caracteritzat per l'accessibilitat a aliments hipercalòrics, contribueix al desequilibri crònic entre energia ingerida i despesa energètica que causen l'obesitat. Les intervencions conductuals dissenyades per a la pèrdua de pes tenen una eficàcia limitada a llarg termini, per la qual cosa hi ha una necessitat urgent de desenvolupar estratègies més eficaces i segures per a prevenir i tractar l'obesitat i les seues comorbiditats. El desenvolupament d'estratègies terapèutiques dirigides a l'intestí per a millorar la salut metabòlica requereix un coneixement en profunditat de les vies de senyalització neuroendocrina intestinal que regulen la ingesta i l'equilibri energètic. L'objectiu d'aquesta tesi ha sigut aprofundir en les interaccions intestí-cervell implicades en el control de l'homeòstasi energètica, incloent els components endocrins, neurals i la microbiota intestinal, en el context del desenvolupament de l'obesitat induïda per una dieta hipercalòrica. En els Capítols 1 i 2 hem explorat noves funcions de les neurones sensorials aferents que expressen el canal de sodi Nav1.8 en el control de l'homeòstasi energètica, considerant les diferències entre sexes. Hem generat un model de ratolí mancat de les neurones Nav1.8+ mitjançant ablació amb toxina diftèrica. En el Capítol 1 hem demostrat que les neurones Nav1.8+ són indispensables per a regular, específicament segons el sexe, les vies neurals i endocrines implicades en l'homeòstasi energètica. En femelles, l'ablació d'aquestes neurones millora la regulació de la glucosa postprandial potenciant la senyalització enteroendocrina de GLP-1 i accelera el trànsit intestinal, mentre que en mascles indueix resistència a l'augment de pes induït per una dieta obesogènica. En el Capítol 2 hem demostrat que, en mascles, l'ablació de les neurones Nav1.8+ altera el control coordinat de la ingesta i les variacions de pes diàries, a més d'alterar la senyalització enteroendocrina i les oscil·lacions diàries de la microbiota intestinal en resposta a l'estat nutricional (dejuni/ingesta), i pertorbar l'homeòstasi del sistema immunitari intestinal. En el capítol 3, hem utilitzat un model de ratolí amb obesitat induïda per dieta per explorar els mecanismes pels quals Phascolarctobacterium faecium DSM 32890, una soca bacteriana intestinal aïllada d'humans metabòlicament sans, prevé l'obesitat modulant la ingesta. L'administració de P. faecium redueix la ingesta calòrica gràcies a la hipersecreció de l'hormona gastrointestinal saciant PYY. Independentment dels seus efectes anorexigènics, el bacteri exerceix els seus beneficis metabòlics estimulant el trànsit intestinal i reduint l'absorció intestinal de lípids, evitant l'acumulació de greix corporal. En conclusió, aquesta tesi doctoral proporciona evidència preclínica que contribueix a una comprensió més precisa de les vies neuroendocrines que comuniquen l'intestí i el cervell, i del paper que té la microbiota intestinal en la regulació de la ingesta i la despesa energètica. Destaquem la importància de les neurones sensorials aferents Nav1.8+ en la detecció d'estímuls intestinals per quimioreceptors per a regular l'equilibri energètic en ambdós sexes, que obri una nova línia d'investigació per a dissenyar ferramentes de neuromodulació de les neurones Nav1.8+ amb la finalitat de prevenir i tractar els trastorns metabòlics induïts per la dieta, de forma específica per a cada sexe. També destaquem que P. faecium és un bacteri candidat com a probiòtic de nova generació, ja que modula el sistema enteroendocrí de l'hoste i prevé l'obesitat en un model preclínic. En conjunt, aquests troballes proporcionen una base per al desenvolupament d'estratègies terapèutiques basades en l'intestí dirigides a combatre l'obesitat i comorbiditats associades., [EN] Obesity is a major global public health challenge that has reached epidemic proportions. Besides its profound impact on health and well-being, this metabolic disorder represents a significant economic burden to society. Our westernized environment where high-calorie foods are readily available, represents a major driver of the chronic imbalance between energy intake and energy expenditure that cause obesity. The limited effectiveness of behavioral interventions to manage long-term weight loss highlights the urgent need to develop more effective and minimally invasive approaches to prevent and treat obesity and its comorbidities. The development of gut-targeted therapeutic strategies to improve metabolic health requires a comprehensive understanding of the gut neuroendocrine signaling pathways that, in interaction with the gut microbiota, control feeding behavior to ultimately maintain energy balance. The aim of this thesis has been to gain insight into gut-brain interactions, including those mediated by endocrine, neural and gut microbial components, involved in the control of energy homeostasis, with a focus on obesogenic diet-related dysfunctions that increase susceptibility to develop obesity. In Chapters 1 and 2, we have investigated novel functions of sensory afferent neurons expressing the sodium channel Nav1.8 in the control of energy homeostasis, considering sex-specificities, by generating a mouse model lacking Nav1.8+ neurons through a diphtheria toxin ablation strategy. In Chapter 1, we show that Nav1.8+ neurons are required to control neural and endocrine pathways involved in energy homeostasis in a sex-specific manner. Specifically, ablation of Nav1.8+ neurons in females improves postprandial glucose regulation by enhancing glucagon-like peptide-1 enteroendocrine signaling and accelerating intestinal transit, whereas in males it induces resistance to weight gain in response to an obesogenic diet. To further explore the role of Nav1.8+ neurons in controlling food intake and pre- and post-prandial daily rhythms that influence metabolic phenotype, in Chapter 2 we show in males that ablation of Nav1.8+ sensory neurons impairs the coordinated control of food intake and body weight fluctuations throughout the day. The loss of these neurons also alters the physiological enteroendocrine signaling and daily gut microbiota oscillations in response to the nutritional status (fasting/refeeding cycles) and disrupts intestinal immune homeostasis. In Chapter 3, we used a diet-induced obese mouse model to investigate the mechanisms by which Phascolarctobacterium faecium DSM 32890, a gut bacterial strain isolated from metabolically healthy humans, prevents obesity by modulating food intake. We show that administration of P. faecium reduces caloric intake by promoting hypersecretion of a satiating gastrointestinal hormone, the peptide YY (PYY). Independently of its anorexigenic effects, the bacterium exerts its metabolic benefits via complementary mechanisms, specifically by stimulating intestinal transit and reducing intestinal lipid absorption, thereby preventing body fat accumulation. In conclusion, this doctoral thesis provides preclinical evidence for a better understanding of gut-to-brain neuroendocrine pathways and the role of gut microbiota in the regulation of food intake and energy expenditure. We highlight the importance of Nav1.8+ sensory afferent neurons in gut chemosensing for maintaining energy balance in both sexes, which prompts novel research lines and opportunities to design of sex-specific neuromodulation tools targeting Nav1.8+ neurons for prevention and treatment of diet-induced metabolic disorders. We also highlight that P. faecium is a promising next-generation probiotic candidate, as it modulates the host enteroendocrine system and prevents obesity in a preclinical model. Overall, our findings contribute to the development of gut-based therapeutic strategies to combat obesity and associated comorbidities., This study has been funded by the European Union 7th Framework Program through the MyNewGut project (Grant agreement No. 613979) and Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No. 797297 (MRP), the Spanish Ministry of Science and Innovation (Grant PID2020-119536RB-I00), the European Commission – NextGenerationEU, through the CSIC Interdisciplinary Thematic Platform (PTI+) NEURO-AGING+ (PTI-NEURO-AGING+)”. The grant of the Spanish Ministry of Science and Innovation (MCIN/AEI) to IATA-CSIC as Accredited Center of Excellence (CEX2021-001189-S/ MCIN/AEI/10.13039/501100011033) is acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Exploring the Diet-Microbiota-Brain Axis in Childhood and Adolescence: An Integrated Approach

  • Larroya García, Ana
[ES] En los últimos años se ha producido un aumento de los problemas de conducta, ansiedad y dificultades de aprendizaje en niños y adolescentes, lo que pone de relieve la necesidad de estrategias preventivas desde etapas tempranas. Diversos factores ambientales influyen en la salud mental, especialmente la dieta, que puede afectar al desarrollo cerebral a través de mecanismos metabólicos, inmunitarios y de la microbiota intestinal, en el marco del eje dieta-intestino-cerebro. Ante la falta de herramientas adecuadas en población juvenil española, esta tesis comienza validando el cuestionario FFQ-EPIC en niños y adolescentes, demostrando que es un instrumento fiable y válido para evaluar la ingesta dietética. Posteriormente, mediante un estudio transversal, se analizan las relaciones entre dieta, microbiota y salud mental. Los resultados muestran que una dieta occidental se asocia con problemas conductuales y alteraciones en la microbiota, caracterizadas por menor presencia de bacterias beneficiosas y mayor abundancia de bacterias potencialmente patógenas. Además, ciertas bacterias median la relación entre dieta y conducta, y la inclusión de datos de microbiota mejora la identificación de estos problemas. En cuanto a las dificultades cognitivas, se observa que dietas proinflamatorias y pobres en nutrientes clave se asocian con problemas de aprendizaje y funciones ejecutivas. Aunque no hay diferencias globales en diversidad microbiana, sí existen cambios específicos en determinadas bacterias. También se identifican interacciones entre nutrientes y microbiota, algunas con papel mediador en estas alteraciones. Finalmente, la revisión de la literatura confirma la relación entre dieta, microbiota y neurodesarrollo, así como el potencial de intervenciones nutricionales, aunque destaca la falta de estudios en fases subclínicas. En conjunto, la tesis demuestra la compleja interacción entre dieta, microbiota y salud mental en jóvenes, y subraya la importancia de desarrollar estrategias preventivas basadas en estos factores., [EN] In recent years, there has been an increase in behavioral problems, anxiety, and learning difficulties in children and adolescents, highlighting the need for preventive strategies from early stages. Various environmental factors influence mental health, particularly diet, which can affect brain development through metabolic, immune, and gut microbiota mechanisms, within the framework of the diet-gut-brain axis. Due to the lack of appropriate tools for the Spanish youth population, this thesis begins by validating the FFQ-EPIC questionnaire in children and adolescents, demonstrating that it is a reliable and valid instrument for assessing dietary intake. Subsequently, a cross-sectional study analyzed the relationships between diet, microbiota, and mental health. The results show that a Western diet is associated with behavioral problems and microbiota alterations, with lower levels of beneficial bacteria and higher abundance of potentially pathogenic bacteria. Certain bacteria were identified as mediators of the diet-behavior relationship, and including microbiota data improved the identification of these problems. Regarding cognitive difficulties, pro-inflammatory diets poor in key nutrients were associated with learning and executive function problems. Although there were no global differences in microbial diversity, specific bacteria showed significant changes. Nutrient-microbiota interactions were also identified, some acting as mediators of these alterations. Finally, a literature review confirms the relationship between diet, microbiota, and neurodevelopment, as well as the potential of nutritional interventions, while highlighting the lack of studies in subclinical stages. Overall, the thesis demonstrates the complex interaction between diet, microbiota, and mental health in youth, emphasizing the importance of developing preventive strategies based on these factors., [CA] En els últims anys s'ha produït un augment dels problemes de conducta, ansietat i dificultats d'aprenentatge en xiquets i adolescents, cosa que posa de relleu la necessitat d'estratègies preventives des de les primeres etapes. Diversos factors ambientals influeixen en la salut mental, especialment la dieta, que pot afectar el desenvolupament cerebral a través de mecanismes metabòlics, immunitaris i de la microbiota intestinal, dins del marc de l'eix dieta-intestí-cervell. Davant la falta d'eines adequades en la població juvenil espanyola, aquesta tesi comença validant el qüestionari FFQ-EPIC en xiquets i adolescents, demostrant que és un instrument fiable i vàlid per a avaluar la ingesta dietètica. Posteriorment, mitjançant un estudi transversal, s'analitzen les relacions entre dieta, microbiota i salut mental. Els resultats mostren que una dieta occidental s'associa amb problemes de conducta i alteracions en la microbiota, amb menor presència de bacteris beneficiosos i major abundància de bacteris potencialment patògens. També s'identifiquen bacteris que medien la relació entre dieta i conducta, i la inclusió de dades de microbiota millora la identificació d'aquests problemes. Quant a les dificultats cognitives, s'observa que dietes proinflamatòries i pobres en nutrients clau s'associen amb problemes d'aprenentatge i funcions executives. Tot i que no hi ha diferències globals en la diversitat microbiana, sí que hi ha canvis específics en determinats bacteris. També s'identifiquen interaccions entre nutrients i microbiota, algunes amb paper mediador en aquestes alteracions. Finalment, la revisió de la literatura confirma la relació entre dieta, microbiota i neurodesenvolupament, així com el potencial de les intervencions nutricionals, tot destacant la manca d'estudis en fases subclíniques. En conjunt, la tesi demostra la complexa interacció entre dieta, microbiota i salut mental en joves, i subratlla la importància de desenvolupar estratègies preventives basades en aquests factors., The studies included in this Thesis and the contract of AL have been supported by FDGENT grant from Generalitat Valenciana (GVA),the European Commission—NextGeneration EU funds through CSIC Interdisciplinary Thematic Platform Global Health+, the AGROALNEXT program, supported by the Spanish Ministry of Science, Innovation and Universities (MCIU) with funding from European Union NextGenerationEU (PRTR-C17.I1) and Generalitat Valenciana (GVA) (Ref. AGROALNEXT/2022/049), Prometeo from GVA (Ref. CIPROM/2022/15), and MCIU/AEI grant, Ref: PID2023-150693OB-I00. The award to IATA-CSIC as an Accredited Research Center of Excellence “Severo Ocha” (CEX2021-001189-S/MCIN/AEI/10.13039/501100011033) is also acknowledged. The Miguel Servet Grant (CP19/00143) from the Spanish Institute of Health Carlos III (ISCIII) to MC is fully acknowledged. The FDGENT grant from the Ministry of the Valencian Generalitat is fully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Materiales híbridos multifuncionales basados en nano-unidades estructurales activas

  • Melero Gutierrez, Manuel
[ES] En este trabajo de Tesis Doctoral, la investigación se ha centrado en el desarrollo sintético de diferentes materiales basados en polímeros orgánicos covalentes (COPs) para estudiar y mejorar sus propiedades catalíticas en reacciones de transformación orgánica de gran interés industrial. Tras la preparación de cada uno de los COPs de estudio, se han caracterizado sus propiedades estructurales y se ha determinado el correcto ensamblaje de las subunidades activas seleccionadas para ser integradas en las paredes estructurales de estos materiales y conferirles reactividades intrínsecas en diferentes aplicaciones como la catálisis heterogénea siendo ésta en concreto, la principal de estudio. La reactividad de estos materiales se ha evaluado teniendo en cuenta las subunidades activas presentes en su estructura, los mecanismos de reacción en procesos de transformaciones orgánicas, los cuales son un gran interés en el entorno industrial. Finalmente, se ha definido una plataforma de modificación post-sintética de materiales tipo COP para ajustar selectivamente las propiedades químicas de los mismos y de este modo, adaptar su afinidad hacia compuestos específicos. Más específicamente, en el capítulo 3 se ha estudiado la esterificación de ácidos carboxílicos, que permite convertirlos a ésteres, es decir grupos funcionales más versátiles. Esta transformación se ha abordado desde el punto de vista de la catálisis heterogénea empleando COPs basados en subunidades sulfaradas: SOP-1 - SOP-4. El catalizador más eficiente para la esterificación de ácidos carboxílicos ha sido el denominado SOP-1, siendo este catalizador estable durante la reacción, pudiendo ser reciclado fácilmente. Además, el mecanismo de reacción en la esterificación de ácidos carboxílicos como el ácido levulínico con etanol ha sido catalizada por el material SOP-1 y se ha investigado el análisis cinético, resultando en una tendencia de pseudo primer orden. En el capítulo 4, se ha investigado la reacción de acoplamiento fotooxidativo de aminas primarias como la bencilamina catalizada por materiales tipo COP basados en subunidades de triazina y tiofeno, obtenidos mediante síntesis solvotermal. Este procedimiento es aplicable a una gran gama de sustratos como sulfuros aromáticos, compuestos muy demandados en la industria farmacéutica actual. Por último, en el capítulo 5, se afronta el desarrollo de nuevas metodologías de modificación post-síntesis para la funcionalización de COPs con propiedades catalíticas mejoradas. Para ello, se ha seleccionado el material tipo COP TAPB-OMePDA basado en unidades estructurales de 1,3,5-tris(4-aminofenil)benceno y 2,5-dimetoxi-p-fenilendialdehído como materiales de partida para que mediante la reacción de Diels-Alder o la reacción de Povarov, se consigan incorporar compuestos orgánicos activos localizados en el interior de sus poros. En concreto, funcionalizaciones con grupos aldehído o imidazol permitirán ser precursores adecuados para ajustar y mejorar las propiedades existentes de los COPs dirigidos hacia el área de la catálisis, intercambio iónico y adsorción selectiva de gases., [CA] En aquest treball de Tesi Doctoral, la investigació s'ha centrat en el desenvolupament sintètic de diferents materials basats en polímers orgànics covalents (COPs) per a estudiar i millorar les seues propietats catalítiques en reaccions de transformació orgànica de gran interés industrial. Després de la preparació de cadascun dels COPs d'estudi, s'han caracteritzat les seues propietats estructurals i s'ha determinat el correcte ensamblatge de les subunitats actives seleccionades per a ser integrades en les parets estructurals d'aquests materials i conferir-los reactivitats intrínseques en diferents aplicacions com la catàlisi heterogènia, sent aquesta, en concret, la principal d'estudi. La reactivitat d'aquests materials s'ha avaluat tenint en compte les subunitats actives presents en la seua estructura, els mecanismes de reacció en processos de transformacions orgàniques, els quals són de gran interés en l'entorn industrial. Finalment, s'ha definit una plataforma de modificació post-sintètica de materials tipus COP per a ajustar selectivament les propietats químiques d'aquests i d'aquesta manera, adaptar la seua afinitat cap a compostos específics. Més específicament, en el capítol 3 s'ha estudiat l'esterificació d'àcids carboxílics, que permet convertir-los en èsters, és a dir, grups funcionals més versàtils. Aquesta transformació s'ha abordat des del punt de vista de la catàlisi heterogènia emprant COPs basats en subunitats sulfurades: SOP-1 - SOP-4. El catalitzador més eficient per a l'esterificació d'àcids carboxílics ha sigut el denominat SOP-1, sent aquest catalitzador estable durant la reacció, podent ser reciclat fàcilment. A més, el mecanisme de reacció en l'esterificació d'àcids carboxílics com l'àcid levulínic amb etanol ha sigut catalitzat pel material SOP-1 i s'ha investigat l'anàlisi cinètic, resultant en una tendència de pseudo primer ordre. En el capítol 4, s'ha investigat la reacció d'acoblament fotooxidatiu d'amines primàries com la bencilamina catalitzada per materials tipus COP basats en subunitats de triazina i tiofè, obtinguts mitjançant síntesi solvotermal. Aquest procediment és aplicable a una gran varietat de substrats com sulfurs aromàtics, compostos molt demandats en la indústria farmacèutica actual. Finalment, en el capítol 5, s'aborda el desenvolupament de noves metodologies de modificació post-síntesi per a la funcionalització de COPs amb propietats catalítiques millorades. Per a això, s'ha seleccionat el material tipus COP TAPB-OMePDA basat en unitats estructurals de 1,3,5-tris(4-aminofenil)benzè i 2,5-dimetoxi-p-fenilendialdehid com a materials de partida perquè mitjançant la reacció de Diels-Alder o la reacció de Povarov, s'aconseguisca incorporar compostos orgànics actius localitzats en l'interior dels seus porus. En concret, funcionalitzacions amb grups aldehid o imidazol permetran ser precursors adequats per a ajustar i millorar les propietats existents dels COPs dirigits cap a l'àrea de la catàlisi, intercanvi iònic i adsorció selectiva de gasos., [EN] In this Doctoral Thesis, the research has focused on the synthetic development of various materials based on covalent organic polymers (COPs) to study and enhance their catalytic properties in organic transformation reactions of great industrial interest. After the preparation of each COP under study, their structural properties were characterized, and the proper assembly of the selected active subunits was confirmed. These subunits were integrated into the structural walls of the materials to impart intrinsic reactivity in different applications, with heterogeneous catalysis being the primary focus. The reactivity of these materials was evaluated by considering the active subunits present in their structure and the reaction mechanisms in organic transformation processes, which are of great industrial interest. Finally, a platform for the post-synthetic modification of COP-type materials was established to selectively adjust their chemical properties and thereby tailor their affinity for specific compounds. More specifically, Chapter 3 studied the esterification of carboxylic acids, which allows their conversion into esters, more versatile functional groups. This transformation was approached from the perspective of heterogeneous catalysis using COPs based on sulfur-containing subunits: SOP-1 - SOP-4. The most efficient catalyst for carboxylic acid esterification was SOP-1, which proved to be stable during the reaction and easily recyclable. Additionally, the reaction mechanism for the esterification of carboxylic acids, such as levulinic acid with ethanol, was catalyzed by SOP-1, and kinetic analysis was conducted, revealing a pseudo-first-order trend. In Chapter 4, the photooxidative coupling reaction of primary amines, such as benzylamine, was investigated using COP-type materials based on triazine and thiophene subunits obtained through solvothermal synthesis. This procedure is applicable to a wide range of substrates, such as aromatic sulfides, which are highly demanded in today's pharmaceutical industry. Finally, Chapter 5 addresses the development of new post-synthesis modification methodologies for the functionalization of COPs with enhanced catalytic properties. For this purpose, the COP-type material TAPB-OMePDA, based on structural units of 1,3,5-tris(4-aminophenyl)benzene and 2,5-dimethoxy-p-phenylenedialdehyde, was selected as the starting material. Through the Diels-Alder reaction or the Povarov reaction, active organic compounds were incorporated into the pores of the material. Specifically, functionalizations with aldehyde or imidazole groups will serve as suitable precursors to fine-tune and improve the existing properties of COPs, particularly in the areas of catalysis, ion exchange, and selective gas adsorption., Quiero expresar mi profundo agradecimiento al Instituto de Tecnología Química (ITQ-UPV-CSIC) por proporcionarme los recursos necesarios para llevar a cabo esta investigación. Agradezco especialmente el apoyo financiero otorgado por el Ministerio de Ciencia, Innovación y Universidades, a través del contrato predoctoral para la formación de doctores/as (PRE2018-084071), así como la financiación de los proyectos de investigación PID2020-112590GB-C21, CEX2021-001230-S, y el apoyo adicional de la Unión Europea a través del programa NextGeneration (PRTR-C17.I1) y de la Generalitat Valenciana (MFA/2022/003). Sin estas contribuciones, el desarrollo de esta tesis doctoral no habría sido posible.
BIRD. BCAM's Institutional Repository Data
Publicación Tesis doctoral (DoctoralThesis)

Tackling the development of hormone therapy resistance in breast cancer through mathematical modelling

  • Parga, M.
Patients suffering from estrogen-driven breast cancer frequently develop hardly predictable resistance to hormone therapy, which significantly complicates treatment. Current approaches for tackling this problem include cell models and clinical studies, both supported by sequencing technologies like RNA-seq, and offering different strengths and limitations. This dissertation addresses the challenge of predicting resistance to hormone therapy in breast cancer by merging advances in bioinformatics and Bayesian statistics, and applying them to two types of data – RNA-seq data and clinical data. First, we explore the statistical analysis of clinical data through Bayesian inference combined with enhanced Markov Chain Monte Carlo techniques, and introduce a novel algorithm for adaptive integration in prospective Modified Hamiltonian Monte Carlo (MHMC) methods. We demonstrate its positive effect on performance of MHMC in biomedical applications using clinical data of breast cancer patients. Next, we propose and implement an RNA-seq pipeline within our interactive web-app for the analysis of resistant breast cancer cell lines sequenced at CIC bioGUNE. Finally, we propose an original approach based on a Bayesian logistics regression model coupled with a simulated annealing-like algorithm for a combined analysis of RNA-seq and clinical data, and apply it to ad hoc data to obtain and validate in-silico and in-vitro a novel 6-gene signature for stratifying patient response to hormone therapy.
BIRD. BCAM's Institutional Repository Data
Publicación Tesis doctoral (DoctoralThesis)

Unsupervised learning approaches for disease progression modeling

  • Zaballa, O.
This thesis presents methodologies for unsupervised learning from discrete sequences that define a patient's medical history. Specifically, these methods enable the modelling of the evolution of treatment trajectories associated with one or several diseases. We developed models based on various sequence classification techniques to capture the subtypes of treatments for a disease, the temporal irregularities between medical events, and the joint evolution of treatments in a patient's medical history. Furthermore, we introduce efficient methods for learning these models. We used a database provided by Osakidetza for the evaluation of the proposed methodologies, where each patient is represented by a sequence of medical services over time, with only 19% of these medical events having an associated diagnosis. We include practical applications focused on patients diagnosed with breast cancer, thereby highlighting the relevance and impact of the models in real-world situations. In summary, this thesis proposes interpretable methodologies to understand the dynamics of diseases, effectively addressing the particular challenges that arise in electronic health records., Funding in direct support of this work has been provided by the Basque Government through the BERC 2022-2025 program and BMTF project, and by the Ministry of Science, Innovation and Universities: BCAM Severo Ochoa accreditation CEX2021- 001142-S / MICIN / AEI/ 10.13039/501100011033. Jose A. Lozano is also supported by the Basque Government under grant IT1504-22 and Ministry of Science and Innovation under grant PID2022-137442NB-I00. Onintze Zaballa also holds a predoctoral grant (EJ-GV 2019) from the Basque Government.
BIRD. BCAM's Institutional Repository Data
Publicación Tesis doctoral (DoctoralThesis)

Statistical Modelling for Recurrent Events in Sports Injury Research with Applications to Football InjuryData.

  • Zumeta, L.
Sports injuries stand as undesirable side effects of athletic participation, carrying serious consequencesfor athletes' health, their professional careers, and overall team performance. With the growing availability of data, there has been an increasing reliance on statistical models to monitor athletes' healthand mitigate injury risks.In this dissertation, our focus is on the statistical analysis of sports injury data, with an emphasis on the time-varying and recurrent nature of injury occurrences. We develop and assess suitable statistical modelling approaches to address specific research questions that arise in sports injury prevention research. We pursue three primary objectives: (a) identifying biomechanical risk factors using variableselection methods and shared frailty Cox models, (b) developing a flexible recurrent time-to-event approach to model the effects of training load on subsequent injuries, and (c) creating dedicated statistical tools through the open-source R software. These objectives are driven by interdisciplinary research, conducted in close collaboration with the Medical Services of Athletic Club, and are motivated by real-world applications. Namely, the work is based on three distinct data sets: the functional screening tests data, the external training load data, and the web-scraped football injury data. The statistical advancements developed contribute to ongoing efforts in sports injury prevention, providinginsights, methodologies, and accessible software implementations for sports medicine practitioners., This research was supported by the Spanish Ministry of Science and Innovation (MICINN) through the Severo Ochoa SEV-2017-0718 PRE2018- 084007 funding and the BCAM Severo Ochoa accreditation CEX2021-001142- S/MICIN/AEI/10.13039/501100011033; by the Basque Government through the BERC 2018-2021 and BERC 2022-2025 programs, and the PRE_2021_2_0029 funding; and by the AEI/FEDER, UE through the “S3M1P4R” PID2020-115882RB-I00 project.
BIRD. BCAM's Institutional Repository Data
Publicación Tesis doctoral (DoctoralThesis)

Quantifying the impact of COVID-19 non-pharmaceutical interventions and vaccination using mathematical modeling and cost-effectiveness analysis

  • Estadilla, C.D.
In 2020, COVID-19 emerged as a global health crisis, prompting the widespread adoption of non-pharmaceutical interventions (NPIs) such as lockdowns, social distancing, and mask mandates. These measures, along with large-scale vaccination efforts, aimed to control virus transmission and reduce severe health outcomes among the elderly and those with comorbidities, albeit with considerable economic impacts. This dissertation examines the effectiveness and cost-effectiveness of public health measures against COVID-19, with a focus on the Basque Country—a region with a highly aging population. Through mathematical modeling and health economics, we assess the role of NPIs in reducing transmission, the impact of the disease in life expectancy, as well as the cost-effectiveness of vaccination, particularly given the spread of more transmissible variants. This work presents estimates of hospitalizations and deaths prevented by vaccination, using models fitted to two years of daily data, and compares these with findings from other settings. These insights inform a cost-effectiveness analysis from a healthcare payer perspective.
BIRD. BCAM's Institutional Repository Data
Publicación Tesis doctoral (DoctoralThesis)

Displacement processes with random shifting and their applications

  • Dahlenburg, M.
The thesis starts with a generalized model of Stochastic resetting that extends the classical concept through a random resetting amplitude. In particular there are two scenarios: independent and dependent Random amplitude stochastic resetting (RASR). A general analytical formalism of RASR is provided explicitly based on the first renewal picture, whereby the reduction to special cases is provided. The quantitative analysis is specified through the discussion of the mean value and the variance of the height in presence of a ballistic free propagation for Poissonian and constant pace resetting. These choices of resetting interval lengths are based on the geophysical application of sediment dynamics, in which the free propagation mimics the gradual increase (deposition) or decrease (erosion) of a sedimentation profile, whereas the resets represent an additional erosion mechanism. The latter mechanism could be seasonal (constant pace resetting) or random in time weather events such as extreme floods. The qualitative difference between independent and dependent RASR is that the latter class becomes stationary, whereas the former remains nonstationary. Apart from the above geophysical scenarios, this extension of the resetting dynamics can be applied to population dynamics interrupted by epidemics or crises-interrupted financial markets. All these applications correspond to the intermittent picture of a parent process with superimposed resetting statistic, which motivates the investigations of the RASR-model as a random search strategy. The following chapter investigates the search properties of the continuous time random walk (CTRW), which can be derived from the independent RASR-class. The problem leads to the derivation of a nonhomogeneous Wiener-Hopf equation that exactly calculates the mean first-passage time (MFPT). Apart from the fact, that the derived formalism may also be used for the indirect estimation of the jump-length PDF by assuming a given MFPT, it is shown by use of a specific jump-size PDF that the MFPT is infinite for symmetric random walks, but it becomes finite only for asymmetric jumps with a negative mean. Asymmetric jumps can be physically explained through an active movement as, e.g., chemotaxis or animal movement. However, for the quantitative description of molecular dynamics, symmetric CTRWs are presumed, for which the MFPT is not a proper quantity. In the subsequent chapters the author extended and modified these calculations for removing this failure of the MFPT for the investigation of symmetric random walks. In the fourth chapter of the thesis, a formalism for the calculation of the survival probability in first-passage time problems for symmetric random walks in semi-infinite space is provided. Therefore, a Sturm-Liouville system of equations may provide the unique solution, which is shown for a concrete example of jump-size densities in the discrete time scenario. In addition, the Sturm-Liouville system is also derived for the survival probability of a CTRW. The previous example of jump-size PDF is applied also in the continuous-time setting for arbitrary waiting-time distribution, that holds for Markovian and non-Markovian CTRW. In the last chapter of this thesis, the MFPT of a CTRW in the presence of a uniformly moving target is discussed. Formally, the MFPT depends on the whole jump-sizes and waiting-times distributions within this configuration. Thus, the simple picture that emerged for a fixed target, when the MFPT depends on the mean waiting time, only, is (almost always) broken. Nevertheless, for a uniformly departing target, the MFPT of a CTRW may fulfill the property to be independent of the entire waiting-time PDF for a certain class of jump-size densities, that is derived within the thesis. Moreover, it is shown that the average of the entire process, i.e., jumps plus uniform movement must be negative to provide a finite MFPT, which is not satisfied by symmetric jump-size PDFs in the presence of a departing target. However, for an arriving target, the MFPT is finite even for symmetric CTRWs. This has been observed for a paradigmatic setting for waiting-time PDF and jump-size density, for which the exact result is provided analytically., BERC 2018–2021, Predoc Severo Ochoa. PRE2018-084427
BIRD. BCAM's Institutional Repository Data
Publicación Tesis doctoral (DoctoralThesis)

Advances in learning using privileged information for supervised classification

  • Martinez, M.
The world is increasingly data-dependent with more automatic jobs thanks to advances in the development of intelligent machines capable of learning complex patterns accurately. However, in some scenarios, not all available information is leveraged in the machine learning process. In a clinical setting, a patient’s health record is available, but typically not all of the information is used during the learning process. For instance, some features may be discarded from the training process due to their unavailability at deployment time. These features are called privileged features and are leveraged through the Learning Using Privileged Information (LUPI) paradigm, a learning scenario that exploits privileged features as additional information for training models. In this dissertation, we establish new methodologies that incorporate the LUPI paradigm with supervised classification algorithms. First, motivated by the widespread use of logistic regression in the clinical field, we introduce two new methods that leverage privileged information for learning a logistic regression. For its development, the parameters of a conventional logistic regression trained with all available features, privileged and regular, are projected onto the parameter space associated to regular features (available at training and deployment time). The projection to obtain the model parameters is performed by the minimization of two different loss functions governed by logit terms and posterior probabilities. In addition, a metric is proposed to determine whether the use of privileged information can enhance performance. Subsequently, the privileged learning process is addressed through a knowledge distillation perspective: information from a teacher learned with regular and privileged features is transferred to a student composed exclusively of regular features. While most approaches assume perfect knowledge for the teacher, it can commit mistakes. Assuming that, we propose a novel privileged distillation framework with a double contribution. Firstly, a designed function to imitate the teacher when it classifies correctly and to differ in cases of misclassification. Secondly, an adaptation of the cross-entropy loss to appropriately penalize the instances where the student outperforms the teacher. Its effectiveness is empirically demonstrated on datasets with imperfect teachers, significantly enhancing the performance of state-of-the-art frameworks. Furthermore, necessary conditions for successful privileged learning are presented, along with a dataset categorization based on the information provided by the privileged features. Finally, we propose a multi-task privileged framework that combines two types of tasks. First, the privileged-prediction task involves using regular features to predict privileged information, working as an intermediate step to guide the learning process. Second, the main learning objective, the target task, uses the predicted privileged information along with the regular features to make the final target prediction. Furthermore, knowledge distillation techniques are included within the target task to effectively exploit the privileged information. Additionally, we analyze misclassification causes and refine the proposed multi-task privileged learning to reduce errors. All the contributions reported in the dissertation are empirically evaluated in tabular datasets and image-related problems, achieving improvements compared to state-of-the-art approaches., PID2022-137442NB-I00 PRE2021-099279
BIRD. BCAM's Institutional Repository Data
Publicación Tesis doctoral (DoctoralThesis)

Topics in harmonic analysis related to Rubio de Francia square functions and directional singular integrals

  • Florez, M.
This thesis focuses on the $L^p $-boundedness of maximal directional singular integral operators and Rubio de Francia square functions. Firstly, we study maximal directional singular integral operators in $ \mathbb{R}^n $ defined by a Hörmander--Mihlin multiplier on an $ (n-1)$-dimensional subspace which act trivially in the perpendicular direction. The choice of subspace depends measurably on the first $ n-1 $ variables of $ \mathbb{R}^n $. Assuming the subspace to be non-degenerate in the sense that it is contained in a subspace of $ \mathbb{R}^n $ away of a cone around $e_n$ and the function $ f $ to be frequency supported in a cone away from $ \mathbb{R}^{n-1} $, we prove $ L^p $ bounds for these operators when $ p > 3/2 $. If we assume, additionally, that $ \widehat{f} $ is supported in a single frequency band, we are able to extend the boundedness range to $ p >1 $. The non-degeneracy assumption cannot, in general, be removed, even in the band-limited case. Secondly, we study one-dimensional square functions in the spirit of Rubio de Francia. Let $P_\omega f$ be the Fourier restriction of $f\in L^2(\mathbb{R})$ to an interval $\omega\subset \mathbb{R}$. If $\Omega$ is an arbitrary collection of pairwise disjoint intervals, the square function of $\{P_\omega f: \omega \in \Omega\}$ is termed the Rubio de Francia square function $T^{\Omega}_{\operatorname{RF}}$. In this thesis we prove a pointwise bound for $T^{\Omega}_{\operatorname{RF}}$ by a sparse operator involving local $L^2$-averages. A pointwise bound for the smooth version of $T^{\Omega}_{\operatorname{RF}}$ by a sparse square function is also proved. These pointwise localization principles lead to quantitative $L^p(w)$, $p>2$, and weighted weak-type $(p,p)$, $p\geq 2$, norm inequalities for $T^{\Omega}_{\operatorname{RF}}$. In particular, the obtained weak $L^p(w)$ norm bounds are new for $p\geq 2$ and sharp for $p>2$. The proofs rely on sparse bounds for abstract balayages of Carleson sequences, oscillation inequalities, local orthogonality and time-frequency analysis discretization techniques. The thesis also contains two results related to the outstanding conjecture that $T^{\Omega}_{\operatorname{RF}}$ is bounded on $L^2(w)$ if and only if $w\in A_1$. The conjecture is verified for radially decreasing, even $A_1$ weights, and in full generality for the Walsh group analogue of $T^{\Omega}_{\operatorname{RF}}$., predoc Basque Government grant 2022 "Programa Predoctoral de Formación de Personal Investigador No Doctor", PID2021-122156NB-I00, PID2023-146646NB-I00
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publicación Tesis doctoral (DoctoralThesis)

Bioprotection and genetic resistance against verticillium wilt of olive and pistachio, Bioprotección y resistencia genética frente a la verticilosis del olivo y pistachero

  • Antón-Domínguez, Begoña I.
Verticillium wilt, caused by the soil-borne fungus Verticillium dahliae Kleb., is an important vascular disease affecting a wide range of woody and herbaceous hosts. Olive (Olea europaea L.) and pistachio (Pistacia vera L.) crops are among the most important economically crops seriously affected by the disease worldwide. The persistence of the fungus in the soil, the wide range of hosts and the lack of effective control methods make Verticillium wilt difficult to control. Therefore, searching for new sustainable disease control strategies are needed within an integrated management approach. To date, two of the most environmentally friendly measures available are the use of bioprotection through plant extracts and genetic resistance through resistant cultivars or rootstocks. In this context, since 2011, the Agroforestry Pathology Research Group AGR-216 of the University of Cordoba (Spain) has been developing a broad line of research on the biological control of Verticillium wilt of olive, in which more than 280 compounds have been evaluated under controlled conditions, including microorganisms (fungi, bacteria), organic amendments (animal and food industry waste), natural substances (essential oils, plant extracts), nutrients and resistance inducers. Likewise, the Genetic Resources and Olive Breeding Research Group (UCOLIVO) AGR-157 has developed an olive breeding program with emphasis in resistance against Verticillium wilt and, more recently, a pistachio breeding program, with the evaluation of more than 25,000 olive genotypes and 5,000 pistachio genotypes to date. Thus, this PhD Thesis has been developed in collaboration with both groups, an aspect that will help to lay the bases for future studies on the combined application of control measures based on bioprotection and genetic resistance against Verticillium wilt in olive and pistachio trees. The specific objectives of this PhD Thesis are: i) to evaluate commercial plant extracts against Verticillium wilt of olive trees; ii) to evaluate laboratory-made plant extracts against VWO; iii) to determine the mode of action of the most effective laboratory-made plant extracts; iv) to develop a method to characterize olive cultivars and genotypes based on their genetic resistance to the disease under controlled conditions; and v) to evaluate pistachio trees grafted on different Pistacia rootstocks against Verticillium wilt under field conditions. There is two complementary objectives that will be described later. The first and second objectives of this PhD Thesis were to evaluate in vitro the effect of seven natural-based commercial products; and nine laboratory-made extracts, against the viability of V. dahliae reproductive structures, and the disease progression in olive plants of cv. Picual. Willow and seaweed extracts were the most effective in reducing the disease in plants inoculated with V. dahliae when applied by irrigation compared to the remaining commercial products evaluated. The chemicals aluminium lignosulfonate 1 and copper phosphite, included for comparison, were also effective in reducing the disease. Pomegranate peel, carob pod or carob leaf extracts were obtained using three solvents: ethanol, methanol and ethyl acetate. For this purpose, 120 g of ground dried plant material was shaken for 48 h with 1 l of solvent. The mixture was filtered and evaporated using a rotavapor. An analysis of its secondary metabolite profile was performed using QTRAP ultra-high performance liquid chromatography with mass spectrometry. Pomegranate peel and carob leaf extracts obtained with methanol and ethanol were the most effective in reducing the disease in plants when applied by irrigation. High concentrations of gallic acid were found in all extracts. The aim of this study was to select the best laboratory-made extracts (objective 2) and thus determine their possible modes of action. Objective 3 aimed to determine the mode of action of pomegranate and carob leaf extracts obtained with methanol and whether they act by improving the defence system of olive plants of cv. Picual against V. dahliae through relative gene expression. For this purpose, the relative expression of marker genes related to resistance induction was quantified by RT-qPCR in stems and roots of noninoculated and untreated olive plants (water; negative control), noninoculated and treated plants with pomegranate or carob extracts, inoculated and untreated plants (water; positive control), and inoculated and treated plants with pomegranate and carob extracts. High relative expression values of the salicylic acid (SA)-marker gene were found at 1.5 and 3 months after the third treatment in olive plants inoculated and treated with pomegranate extract relative to inoculated and treated with the same extract after the third treatment. The results suggest that carob and pomegranate extracts do not activate the jasmonic acid (JA) pathway, as no increase in the expression of the marker gene was observed. Both extracts seem to be involved in the expression of abscisic acid (ABA) and polyphenol oxidase (PPO). Objective 4 was carried out to develop an inoculation method under controlled conditions that would allow the characterization of olive cultivars and genotypes for their resistance to Verticillium wilt, highly correlated to the response observed under field conditions. To this end, an artificial substrate based on sterile sand, corn flour and water, colonized by V. dahliae, was used to inoculate olive plants of the cvs. Picual, Arbequina, Koroneiki and Frantoio using two doses of substrate (20 or 80% of final inoculum concentration). The results showed that inoculations carried out with the artificial substrate at a dose of 20% allowed the differentiation of close susceptibility levels (‘Picual’ vs. ‘Arbequina’), while those carried out at a dose of 80% allowed the differentiation of close resistance levels (‘Koroneiki’ vs. ‘Frantoio’). The objective 5 was to evaluate pistachio trees grafted on five commonly used rootstocks: Pistacia terebinthus, P. atlantica, P. integerrima, and the interspecific hybrids ‘Platinum’ and ‘UCBI’, in an experimental field with a naturally infested soil with V. dahliae. The plants grafted on P. atlantica were more resistant than those grafted on P. integerrima, highlighting the intraspecific variability in resistance to the disease. In parallel, the disease was also monitored in an already established commercial field with pistachio trees grafted on P. terebinthus or ‘UCBI’. This monitoring assay served to validate the findings observed in the experimental field. In this sense, P. terebinthus proved to be susceptible to V. dahliae in the presence of inoculum of the pathogen in the soil, regardless of its concentration, while the hybrid ‘UCBI’ can be considered resistant to Verticillium wilt even in the presence of high densities of the pathogen. The objectives 6 and 7 were conducted as complementary tasks within this PhD Thesis. The objective 6 was carried out to determine the effect of the most effective laboratory-made extracts (pomegranate peel and carob leaf extracts obtained with methanol) previously tested in the objective 2, against olive anthracnose caused by Colletotrichum spp., one of the major aerial diseases of this crop. Copper sulphate was included for comparative purposes. Carob leaf extract was the most effective one in reducing the disease incidence progression in olive plants of cv. Arbequina. In order to elucidate its mode of action, H2O2 and phenolic compounds production were quantified by high-performance liquid chromatography with photodiode array detection (DAD-HPLC) in olive leaf samples. Both extracts were able to interfere with the plant defence response, as an increase in the production of H2O2, phenolic compounds and flavonoids was detected in plants treated and inoculated with the pathogen. Finally, the objective 7 was developed as complementary work to determine the existence of cross-pathogenicity by assessing the severity of different V. dahliae isolates of the defoliating ‘D’ and non-defoliating ‘ND’ pathotypes, from olive or pistachio trees, on woody (olive and pistachio) and herbaceous (cotton and tomato) hosts. D pathotype V. dahliae isolate was more aggressive than ND pathotype on olive and cotton plants, while both pathotypes showed similar aggressiveness on P. terebinthus. The ‘UCBI’ hybrid was highly resistant to all isolates regardless the pathotype. The knowledge generated in this PhD Thesis represents a relevant step in the bioprotection of Verticillium wilt in olive trees, opening new avenues to explore in order to better understand the mechanism of action of plant extracts against V. dahliae in this crop. In addition, it contributes to the knowledge of the genetic resistance to be exploited in olive and pistachio against Verticillium wilt. This PhD Thesis helps to lay the groundwork for future work combining both control methods in order to further develop more environmentally sustainable integrated disease management., La verticilosis, causada por el hongo de suelo Verticillium dahliae Kleb., es una enfermedad vascular de gran importancia que afecta a una amplia gama de huéspedes leñosos y herbáceos. El olivo (Olea europaea L.) y pistachero (Pistacia vera L.) se encuentran entre los cultivos económicamente más importantes gravemente afectados por la enfermedad en todo el mundo. La persistencia del hongo en el suelo, el amplio rango de hospedantes y la ausencia de métodos de control efectivos, hacen que la verticilosis sea difícil de controlar. Por lo tanto, se hace necesaria la búsqueda de nuevas estrategias sostenibles de control de la enfermedad dentro de un manejo integrado. Hasta el momento, dos de las medidas disponibles más respetuosas con el medio ambiente son el uso de la bioprotección mediante extractos de plantas y la resistencia genética mediante cultivares o portainjertos resistentes. En este contexto, desde 2011, el Grupo de Investigación Patología Agroforestal AGR-216 de la Universidad de Córdoba (España) viene desarrollando una amplia línea de investigación sobre el control biológico de la verticilosis del olivo, en la que se han evaluado en condiciones controladas más de 280 compuestos, entre microorganismos (hongos, bacterias), enmiendas orgánicas (residuos animales y de la industria alimentaria), sustancias naturales (aceites esenciales, extractos de plantas), nutrientes e inductores de resistencia. Así mismo, el Grupo de Investigación Recursos Genéticos y Mejora del Olivo (UCOLIVO) AGR-157 viene desarrollando un programa de mejora genética del olivo frente a la verticilosis y, más recientemente, un programa de mejora genética del pistachero, con la evaluación de más de 25.000 genotipos de olivo y 5.000 de pistachero hasta la fecha. Así, esta Tesis Doctoral se ha desarrollado en colaboración de ambos grupos, aspecto que contribuirá a sentar las bases de estudios futuros sobre la aplicación combinada de medidas de control basadas en la bioprotección y la resistencia genética frente a la verticilosis en olivo y pistachero. Los objetivos específicos de esta Tesis Doctoral son: i) evaluar extractos vegetales comerciales frente a la Verticilosis del olivo; ii) evaluar extractos vegetales obtenidos en laboratorio frente a VWO; iii) determinar el modo de acción de los extractos vegetales obtenidos en laboratorio más eficaces; iv) desarrollar un método para caracterizar cultivares y genotipos de olivo en función de su resistencia genética a la enfermedad en condiciones controladas; y v) evaluar pistacheros injertados sobre diferentes portainjertos de Pistacia frente a la verticilosis en condiciones de campo. Hay dos objetivos complementarios que se describirán más adelante. El primer y segundo objetivo de esta Tesis Doctoral fue la evaluación in vitro del efecto de siete productos comerciales de base natural; y nueve extractos elaborados en laboratorio, en la viabilidad de las estructuras reproductivas de V. dahliae, y en el progreso de la enfermedad en plantas de olivo cv. Picual. Los extractos de sauce y algas fueron los más eficaces en la reducción de la enfermedad en plantas inoculadas con V. dahliae cuando se aplicaron por riego, en comparación con el resto de los productos comerciales evaluados. Los productos químicos lignosulfonato de aluminio 1 y fosfito de cobre, incluidos con fines comparativos, también resultaron efectivos en la reducción de la enfermedad. Los extractos de cáscara de granada, vaina de algarrobo u hoja de algarrobo se obtuvieron utilizando tres disolventes: etanol, metanol y acetato de etilo. Para ello, 120 g de material vegetal seco molido se agitaron durante 48 h con 1 l de disolvente. La mezcla se filtró y se evaporó utilizando un rotavapor. Se realizó un análisis de su perfil de metabolitos secundarios mediante cromatografía líquida de ultra alta resolución QTRAP con espectrometría de masas. Los extractos de cáscara de granada y de hoja de algarrobo obtenidos con metanol y etanol fueron los más eficaces en la reducción de la enfermedad en planta cuando se aplicaron por riego. Se encontraron altas concentraciones de ácido gálico en todos los extractos. El objetivo de este estudio fue seleccionar los mejores extractos elaborados en laboratorio (objetivo 2) y determinar sus posibles modos de acción. El objetivo 3 pretendía determinar el modo de acción de los extractos de granada y hojas de algarrobo obtenidos con metanol y si actúan mejorando el sistema de defensa de las plantas de olivo cv. Picual frente a V. dahliae mediante expresión de genes relativa. Para ello, se cuantificó mediante RT-qPCR la expresión relativa de genes marcadores relacionados con la inducción de resistencia en tallos y raíces de plantas de olivo no inoculadas y sin tratar (agua; control negativo), plantas no inoculadas y tratadas con extractos de granada o algarroba, plantas inoculadas y sin tratar (agua; control positivo), y plantas inoculadas y tratadas con extractos de granada y algarroba. Se encontraron altos valores de expresión relativa del gen marcador del ácido salicílico (SA) a 1,5 y 3 meses después del tercer tratamiento en plantas de olivo inoculadas y tratadas con extracto de granada en relación con las inoculadas y tratadas con el mismo extracto después del tercer tratamiento. Los resultados sugieren que los extractos de algarroba y granada no activan la vía del ácido jasmónico (JA), ya que no se observó un aumento en la expresión del gen marcador. Ambos extractos parecen estar implicados en la expresión del ácido abscísico (ABA) y de la polifenol oxidasa (PPO). El objetivo 4 se llevó a cabo para desarrollar un método de inoculación en condiciones controladas que permita caracterizar cultivares y genotipos de olivo en función de su resistencia a la verticilosis de forma similar a la respuesta que se observa en condiciones de campo. Para ello, se preparó un sustrato artificial a base de arena, harina de maíz y agua estériles, colonizado por V. dahliae, para inocular plantas de olivo de los cvs. Picual, Arbequina, Koroneiki y Frantoio utilizando dos dosis de sustrato (20 u 80% de la concentración final de inóculo). Los resultados indicaron que las inoculaciones realizadas con el sustrato artificial a una dosis del 20% permitieron diferenciar niveles de susceptibilidad cercanos (‘Picual’ vs. ‘Arbequina’), mientras que las realizadas a una dosis del 80% permitieron diferenciar niveles de resistencia cercanos (‘Koroneiki’ vs. ‘Frantoio’). El objetivo 5 fue evaluar pistacheros injertados en cinco portainjertos comúnmente utilizados: Pistacia terebinthus, P. atlantica, P. integerrima y los híbridos interespecíficos ‘Platinum’ y ‘UCBI’, en un campo experimental con un suelo naturalmente infestado con V. dahliae. Las plantas injertadas sobre P. atlantica fueron más resistentes que las injertadas sobre P. integerrima, destacando la variabilidad intraespecífica en la resistencia a la enfermedad. Paralelamente, también se realizó un seguimiento de la enfermedad en un campo comercial ya establecido con pistacheros injertados sobre P. terebinthus o ‘UCBI’. Este ensayo de seguimiento sirvió para validar los hallazgos observados en el campo experimental. En este sentido, P. terebinthus se mostró susceptible a V. dahliae en presencia de inóculo del patógeno en el suelo, independientemente de su concentración, mientras que el híbrido ‘UCBI’ puede considerarse resistente a la verticilosis incluso en presencia de altas densidades del patógeno. Los objetivos 6 y 7 se llevaron a cabo como tareas complementarias dentro de esta Tesis Doctoral. El objetivo 6 se llevó a cabo para determinar el efecto de los extractos obtenidos en laboratorio más efectivos (extractos de piel de granada y hoja de algarrobo obtenidos con metanol) previamente testado en el objetivo 2, frente a la antracnosis del olivo causada por Colletotrichum spp., una de las principales enfermedades aéreas de este cultivo. El sulfato de sobre se incluyó con fines comparativos. El de hoja de algarrobo fue el extracto más eficaz para reducir la progresión de la incidencia de la enfermedad en plantas de olivo cv. Arbequina. Para dilucidar su modo de acción, se cuantificó la producción de H2O2 y compuestos fenólicos mediante cromatografía líquida de alta resolución con detección de matriz de fotodiodos (DAD-HPLC) en muestras de hojas de olivo. Ambos extractos fueron capaces de influir en la respuesta de defensa de la planta, ya que se detectó un aumento en la producción de H2O2, compuestos fenólicos y flavonoides en plantas tratadas e inoculadas con el patógeno. Por último, el objetivo 7 se desarrolló como trabajo complementario para determinar la existencia de patogenicidad cruzada mediante la evaluación de la severidad de diferentes aislados de V. dahliae de los patotipos defoliante ‘D’ y no defoliante ‘ND’, procedentes de olivo o pistachero, sobre huéspedes leñosos (olivo y pistachero) y hortícolas (algodón y tomate). El aislado del patotipo D de V. dahliae fue más agresivo que los del patotipo ND en plantas de olivo y algodón, mientras que ambos patotipos mostraron una agresividad similar en P. terebinthus. El híbrido ‘UCBI’ fue altamente resistente a todos los aislados, independientemente del patotipo. El conocimiento generado en esta Tesis Doctoral supone un paso relevante en la bioprotección de la verticilosis en olivo, abriendo nuevas vías a explorar para entender mejor el mecanismo de acción de los extractos vegetales frente a V. dahliae en este cultivo. Además, contribuye al conocimiento de la resistencia genética a explotar en olivo y pistachero frente a la verticilosis. Esta Tesis Doctoral contribuye a sentar las bases para futuros trabajos combinando ambos métodos de control con el fin de seguir desarrollando una gestión integrada de la enfermedad más sostenible medioambientalmente.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis doctoral (DoctoralThesis)

In vivo interactions between food availability and nanoparticles in Caenorhabditis elegans

  • Luo, Zhongrui
During the last decades, nanoparticles (NPs) have been widely used in various fields, especially in medical applications such as drugs, imaging agents, and drug-delivery carriers. However, they also raised public concerns regarding the potential adverse influences on human health. Collective efforts from worldwide researchers in materials and biological science have been invested in investigating the toxicity mechanisms of different NPs. In this thesis, we dedicated major efforts to apply (Caenorhabditis elegans) C. elegans as a robust and simple model organism for toxicity assessments of assorted NPs. The general objective of this thesis was to study effects of food availability on nano-bio interactions between superparamagnetic iron oxide nanoparticles (SPIONs) or 10 nm AuNPs and C. elegans, and prove that this small animal can be used to study alimentary effects. Firstly, we studied the effects of food availability on toxicities induced by exposure to SPIONs after 24 h (acute exposure) or 72 h (prolonged exposure). We found that food provided some protection to C. elegans determined by measuring multiple toxicity endpoints such as survival and reproduction. Worms in the acute exposure condition had a higher uptake efficiency of SPIONS facilitated by food compared with the condition without the addition of food. The utilization of synchrotron Fourier transform infrared microspectroscopy (SR-μFTIR), allowed us to demonstrate that long-exposure (24 h versus 4 h) and high concentrations of SPIONs (500 μg/mL versus 100 μg/mL) induce more severe oxidative stress determined by increased levels of lipid oxidation. Secondly, we investigated food’s influences on worms after 24 h exposure to 10 nm AuNPs. The protective role of food was identified in reducing toxic effects, such as survival and reproduction. Using SR-μFTIR, we found that small-sized AuNPs (10 nm versus 150 nm) or long-exposure (24 h versus 4 h) caused an increased level of lipid oxidation which was related to responses against oxidative stress. On the other hand, we preliminarily evaluated the possibility of performing the photothermal therapy in worms containing 150 nm AuNPs. We found photoablated damages on the laser irradiation spots of worms, suggesting that multiple experimental settings needed to be optimized. At the end of the thesis, also we presented some collaborations where we performed some experiments with different nanomaterials such as lutein and (metal-organic frameworks) MOFs and evaluated them on C. elegans. We studied antioxidative properties of lutein in C. elegans disease models associated with Leigh Syndrome and demonstrated the possibility to apply synchrotron Fourier transform infrared microspectroscopy (SR-μFTIR) on this topic. On the other hand, we performed the preliminary toxicity assessment of MOFs, MIL-127 and chitosan (CS) coated MIL-127 (CS-MIL-127). Additionally, we investigated about effects of the chitosan (CS) coating on C. elegans’ uptake and excretion efficiencies of MIL-127 and CS-MIL-127. We reported the potential of applying C. elegans as an oral administration model of studying metal-organic frameworks’ (MOFs’) in vivo toxicities. In summary, food availability could decrease adverse effects, partially associated with oxidative stress, induce by SPIONs or AuNPs on C. elegans. It also suggested that C. elegans has a great potential of being employed as an oral administration model of testing various materials. Furthermore, combined with other advanced techniques, we could have a more general understanding of the toxicity mechanism and broaden the application range of material science techniques for biological research., Finally, I acknowledge the funding from the Chinese Scholarship Council for pursuing my PhD degree., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis doctoral (DoctoralThesis)

Effective-theory description of heavy-flavored hadrons and their properties in a hot medium

  • Montaña, Glòria
Memòria presentada per optar al grau de doctor per la Universitat de Barcelona. Programa de Doctorat en Física, [EN]: For many decades after the conception of the quark model in 1964, and the development of quantum chromodynamics (QCD) a few years later as the theory governing the strong interaction between quarks and gluons, there was no experimental evidence of the existence of hadronic states beyond the quark-antiquark mesons and the three-quark baryons. In the last two decades, however, with the explosion of data in electron–positron and hadron colliders, many states have been observed that do not fit in this picture, especially in the heavy-flavor sector. Evidence of the existence of the so-called exotic hadrons has recently prompted a lot of activity in the field of hadron physics, with experimental programs in ongoing and upcoming facilities dedicated to the search for new exotic mesons and baryons, and many theoretical efforts trying to disentangle, for instance, compact multiquark structures from hadronic molecules. In this dissertation, we focus on recently seen exotic hadrons with heavy-quark content that may be understood as being generated dynamically from the hadron–hadron interaction. This interaction is derived from a suitable effective Lagrangian and properly unitarized in a full coupled-channel basis. In particular, we discuss the possible interpretation of some of the Ωc* excited states recently discovered at LHCb as being meson–baryon molecular states. We also discuss the dynamical generation of excited open-charm mesons from the scattering of pseudoscalar and vector charmed mesons off light mesons. We show that a double-pole structure is predicted for the D0*(2300) state, as well as for the D1(2430), within the molecular picture, while the Ds0*(2317) and the Ds1(2460) may be interpreted as molecular bound states. Extensions of these calculations to the bottom sector are also presented. Moreover, charmed hadrons are a promising probe of the quark-gluon plasma (QGP) phase that is expected to be created in heavy-ion collision experimental facilities. Charm and anticharm quarks are produced in the early stages of the collision and experience the whole evolution of the QGP, before hadronizing predominantly into open-charm mesons. To describe the experimental data, it is necessary to understand, from the theoretical side, the propagation of the D mesons in the hadronic phase and their interaction with the surrounding medium of light mesons. The approach that we employ in this thesis to study the thermal modification of open heavy-flavor mesons in a hot medium is based on the use of effective theories. By means of an extension to finite temperature of the unitarized effective interactions with the light mesons, we obtain the in-medium spectral properties of the D, D*, Ds, and Ds* ground-state mesons. We also analyze the temperature dependence of the masses and the decay widths of the dynamically generated states. Additionally, we provide results for the bottomed mesons by exploiting the heavy-quark flavor symmetry of the Lagrangian. In order to test the results of the thermal effective theory against lattice QCD calculations, we further employ the temperature-dependent scattering amplitudes and spectral functions to compute charm Euclidean correlators. The spectral properties of charmed mesons at finite temperature can be extracted from lattice QCD data of meson Euclidean correlators, yet relying on a priori assumptions about the shape of the spectral function. Hence, we compare both approaches at the level of Euclidean correlators and find that they compare reasonably well at temperatures below the QCD phase transition temperature. We also present calculations of off-shell transport coefficients in the hadronic phase, such as the drag force and the diffusion coefficients. Contrary to previous approaches in the literature, we implement in-medium scattering amplitudes and the thermal dependence of the heavy-meson spectral properties. The transport coefficients in the QGP phase have been recently computed with lattice QCD and extracted from Bayesian analyses of heavy-ion collision data. We observe a smooth matching with our results at the QCD phase transition temperature, [CA]:La física hadrònica tal com l’entenem en l’actualitat es remunta a la concepció del model de quarks l’any 1964 i la formalització de la teoria de la cromodinàmica quàntica (QCD) uns anys més tard. Durant dècades no es va trobar evidència de l’existència d’hadrons amb una composició diferent de la dels mesons (quark-antiquark) i barions (tres quarks) ordinaris. Tanmateix, les regles de la QCD permeten altres combinacions més exòtiques. En el darrers vint anys, amb l’explosió de dades en experiments de col·lisions electró–positró i d’hadrons, s’han descobert diversos candidats a hadrons exòtics. En aquesta tesi doctoral s’estudien hadrons exòtics amb contingut pesant que han estat observats recentment: els estats excitats Ωc* i Ωb* en el sector bariònic, i els estats D0*(2300), D1(2430), Ds0*(2317) i Ds1(2460) en el sector mesònic, i que es poden descriure com estats hadrònics moleculars generats dinàmicament per la interacció hadró–hadró. Aquest interacció deriva d’un Lagrangià efectiu adequat i s’unitaritza en canals acoblats. D’altra banda, a altes energies té lloc una transició de fase de matèria hadrònica a una fase desconfinada coneguda amb el nom de plasma de quarks i gluons (QGP) i que només es pot trobar a temperatures i/o densitats bariòniques extremadament altes. Experimentalment, les condicions d’alta temperatura i baixa densitat bariònica necessàries per crear un QGP calent es poden aconseguir amb col·lisions d’ions pesants a altes energies. Els hadrons pesants permeten sondejar la formació de la fase de QGP. El treball presentat en aquesta memòria s’orienta a millorar la comprensió de la modificació de les propietats dels mesons amb sabor pesant en un medi calent mitjançant l’ús de teories efectives. A partir de l’extensió a temperatura finita de la interaccions efectives unitaritzades, s’obtenen les propietats en el medi dels mesons amb sabor pesant, tant dels de l’estat fonamental com dels estats generats dinàmicament. Els resultats de les amplituds de dispersió i de les funcions espectrals s’utilitzen per calcular correladors Euclidians i coeficients de transport en la fase hadrònica. Es troba un bon acord amb computacions de lattice QCD, així com amb coeficients de transport obtinguts a partir d’anàlisis Bayesians de dades de col·lisions d’ions pesants a la temperatura de transició de fase., Aquesta tesi s’ha realizat amb un ajut per a la Contractació de Personal Investigador Novell FI-DGR (referència 2018 FI_B 00234) finançat per l’Agència de Gestió d’Ajuts Universitaris i de Recerca de la Generalitat de Catalunya i, a partir de l’octubre del 2018, amb un ajut del Programa de Formació de Professorat Universitari FPU (referència FPU2017/04910) finançat primer pel Ministeri de Ciència, Innovació i Universitats i posteriorment pel Ministeri d’Universitats d’Espanya. A més, s’ha rebut una beca STSM (referència ECOST-STSM-Request-CA15213-44423) de l’acció THOR COST Action CA15213. També s’ha rebut suport a través dels projectes No. MDM-2014-0369 i No. CEX2019-000918-M de l’ICCUB (Unitat d’Excel·lència María de Maeztu) finançats, respectivament, pel Ministeri d’Economia i Competitivitat (MINECO) i pel Ministeri de Ciència i Innovació (MCIN), del projecte No. FPA2016-81114-P del MINECO, dels projectes No. PID2019-110165GB-I00 i No. PID2020-118758GB-I00 del MCIN, així com també dels fons europeus FEDER, sota el contracte FIS2017-87534-P, i el projecte No. 411563442 finançat per la Deutsche Forschungsgemeinschaft (DFG, Fundació Alemanya d’Investigació)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis doctoral (DoctoralThesis)

Hydrostatic equilibrium in the semiclassical approximation

  • Arrechea, Julio
Tesis leída en el Instituto de Astrofísica de Andalucía, el 27/03/2023. Premio SEA Tesis 2024 en astronomía y astrofísica, [EN] Quantum field theory in curved spacetimes (QFTCS) stands as one of the corner- stones of modern theoretical physics. This theory blends together the gravitational and quantum realms in a unique way: It considers the influence of quantum fields on a classical spacetime, and vice versa. While QFTCS gave birth to the phenomena of cosmological particle creation and Hawking radiation emission in black holes, its impact on the physics of compact relativistic stars has remained, for the most part, undiscussed. This thesis is an exploratory analysis. Within the framework of QFTCS, we search for new figures of stellar equilibrium supported by the repulsive forces that characterize vacuum energies. To tackle such an ambitious problem, we follow a constructive approach, solving the semiclassical backreaction problem in scenarios of increasing complexity, but always under the assumptions of staticity and spherical symmetry. The renormalized stress-energy tensor (RSET) of quantum matter is modeled through various analytical approximations in order to evaluate its impact on the Schwarzschild and Reissner-Nordström black holes first, to later address (ultra-) compact stars of uniform classical density. Our explorations lead to the discovery of a novel exotic compact object: the semiclassical relativistic star. These objects are composed of a mixture of classical and quantum matter, sustained thanks to a surprising balance of forces between these two agents. Semiclassical stars can become as compact as black holes but stand out among other proposals since they are i) potentially testable through gravitational-wave observations, and ii) do not rely on any physics beyond QFTCS, which is a solid, well-established framework. The analyses presented in this thesis venture into terra incognita, and unveil a surprisingly rich field of study: hydrostatic equilibrium in semiclassical gravity. The content of this thesis is based on the following publications by the candidate (and collaborators) [1–7]. The content of each Chapter is the following: • Chapter 1 is a summary of the context in which these investigations are embedded. We provide an overview of the field of semiclassical gravity, with particular emphasis on approximating renormalized stress-energy tensors. We introduce the Regularized Polyakov RSET (RP-RSET), to be used in Chapters 2 to 5, and review the main physical properties of semiclassical relativistic stars. • In Chapters 2 and 3 we obtain the semiclassical counterparts to the Schwarzs- child and Reissner-Nordström spacetimes, that is, the asymptotically flat, static vacuum (or electrovacuum) geometries incorporating the backreaction of the RP-RSET (regularized with a cutoff). The most remarkable result is the complete absence of event horizons, transformed into curvature singularities by backreaction effects. The semiclassical counterpart to the extremal black hole exhibits a singular, “quasi-extremal” horizon. Consequently, in semiclas- sical gravity horizons must be evaporative and dynamical. Otherwise, some classical matter fluid must be introduced to obtain regular spacetimes. • Chapter 4 is the longest Chapter of this thesis as it exhaustively classifies the space of solutions of classical and semiclassical stars of uniform density. We provide a catalogue of all semiclassical stellar solutions, with particular emphasis on a family of objects that can surpass Buchdahl limit while be- ing arbitrarily close to becoming regular. This property suggests exploring other regularization schemes for the RP-RSET that might accomplish strict regularity. • Chapter 5 contains the central result of the thesis. We find, through minimal assumptions, families of regularization schemes for the RP-RSET that are consistent with stellar spacetimes of arbitrary compactness. The resulting solutions exhibit a series of universal properties: a negative-mass interior with classical pressures that grow inwards, and the absence of curvature singularities and event horizons. We elaborate on the implications of this result. • Finally, Chapter 6 constitutes a first incursion into one of the future lines of inquiry suggested by this thesis. We rederive the semiclassical Schwarzschild counterpart but through an alternative RSET approximation based on a perturbative reduction of order. We compare these results with those in Chapter 2, allowing to extract robust physical conclusions from semiclassical analyses along the way. Finally, we sketch some preliminary results that apply this method to uniform density stars, showing that semiclassical relativistic stars with akin characteristics also exist under this prescription. • We conclude with some closing remarks and future prospects in Chapter 7. I like to think of this thesis as a road map showing the main pathway we followed, but also the various diversions that came along the way. It is a compilation of reflections, ideas, intuitions, and a sort of vessel through which I have attempted to embody my way of experiencing the process of research in theoretical physics. I hope you find joy in reading this thesis, but above all I wish it becomes useful for someone, somewhere (somehow). Do not hesitate contacting me for whatever reason regarding this text. I sincerely appreciate it., [ES] La teoría cuántica de campos en espacio-tiempos curvos (QFTCS) es una de las piedras angulares de la física teórica moderna. Esta teoría combina los reinos gravitatorio y cuántico de un modo único, por medio de considerar la influencia de los campos cuánticos sobre un espacio-tiempo clásico, y viceversa. Mientras que la QFTCS originó el estudio de los fenómenos de creación de partículas en cosmología y de emisión de radiación Hawking en agujeros negros, las implicaciones de esta teoría en la física de estrellas relativistas compactas han permanecido, en gran parte, sin ser abordadas. Esta tesis es una exploración. Dentro del marco de la QFTCS, buscamos nuevas figuras de equilibrio estelar sustentadas por las fuerzas repulsivas características de la energía del vacío. Con el fin de abordar un problema tan amplio, adoptamos un acercamiento progresivo, resolviendo el problema de la backreaction semiclásica en situaciones de creciente complejidad, pero siempre bajo los supuestos de estaticidad y simetría esférica. Modelizamos el tensor de energía-impulso renormalizado (RSET) asociado a la materia cuántica por medio de diversas aproximaciones analíticas con el fin de, en primer lugar, analizar su impacto sobre los agujeros negros de Schwarzschild y Reissner-Nordström. Acto seguido, nos centramos en estrellas ultracompactas cuya densidad clásica es constante. Estas búsquedas nos conducen al descubrimiento de un nuevo objeto compacto exótico: la estrella relativista semiclásica. Dichos objetos están compuestos por una mezcla de materia clásica y cuántica, posibles gracias a un sorprendente equilibrio de fuerzas entre ambos agentes. Las estrellas semiclásicas pueden llegar a ser tan compactas como los agujeros negros, pero destacan frente a otras propuestas similares porque i) es un modelo potencialmente comprobable mediante observaciones de ondas gravitatorias, y ii) no involucran ninguna física más allá de la QFTCS, que se trata de un marco sólido y bien establecido. Los análisis presentados en esta tesis se adentran en terra incognita, y desvelan un campo de estudio sorprendentemente rico: el equilibrio hidrostático en gravedad semiclásica. El contenido de esta tesis está basado en los siguientes artículos del candidato (y sus colaboradores) [1–7]. El contenido de cada uno de los capítulos es el siguiente: • El capítulo 1 es un resumen del contexto en el que se enmarcan nuestras in- vestigaciones. Proporcionamos una visión general del campo de la gravedad semiclásica, con especial énfasis en las aproximaciones a los tensores de energía-impulso renormalizados. Introducimos el RSET de Polyakov Regular- izado (RP-RSET), del cual hacemos uso en los capítulos 2 a 5, y revisamos las principales propiedades físicas de las estrellas relativistas semiclásicas. • En los capítulos 2 y 3 obtenemos las contrapartidas semiclásicas de los espacio-tiempos de Schwarzschild y Reissner-Nordström, es decir, las ge- ometrías asintóticamente planas y estáticas del vacío (o electrovacío) que incorporan la backreaction del RP-RSET (regularizado con un cutoff ). El resultado más reseñable es la ausencia completa de horizontes de sucesos, que se transforman en singularidades de curvatura a consecuencia de la back- reaction. La contrapartida semiclásica del agujero negro extremal exhibe un horizonte singular, “cuasi-extremal”. Concluimos que en gravedad semiclásica los horizontes deben ser evaporativos y dinámicos. En caso contrario, es nece- sario introducir un fluido de materia clásico para obtener espacio-tiempos regulares. • El capítulo 4 es el más largo de esta tesis ya que contiene una clasificación exhaustiva del espacio de soluciones de estrellas clásicas y semiclásicas de densidad constante. Proporcionamos un catálogo de todas las soluciones estelares semiclásicas, con especial énfasis en una familia de objetos que logran superar el límite de Buchdahl a la vez que están arbitrariamente cerca de convertirse en regulares. Esta propiedad sugiere explorar otros esquemas de regularización para el RP-RSET que consigan lograr una regularidad estricta. • El capítulo 5 contiene el resultado central de esta tesis. Encontramos, por medio de las mínimas suposiciones, familias de esquemas de regularización para el RP-RSET que son consistentes con la existencia de espacio-tiempos estelares de compacidad arbitraria. Las soluciones resultantes exhiben una serie de propiedades universales: un interior de masa negativa con presiones clásicas que crecen hacia el interior, así como la ausencia de singularidades de curvatura y horizontes de sucesos. Concluimos con una disertación acerca de las implicaciones de este descubrimiento. • Por último, el capítulo 6 constituye una primera incursión en una de las futuras líneas de investigación surgidas a raíz de esta tesis. Retomamos la contrapartida semiclásica de la geometría de Schwarzschild pero esta vez por medio de una aproximación al RSET alternativa, basada en una reducción de orden perturbativa. Al comparar estos resultados con los del capítulo 2 logramos extraer conclusiones físicas robustas de los análisis semiclásicos. Finalmente, esbozamos algunos resultados preliminares que surgen al aplicar este método a estrellas de densidad constante. Así, probamos la existencia de estrellas relativistas semiclásicas con características afines a las del capítulo 5. • Concluimos con algunos comentarios finales y perspectivas de futuro en el capítulo 7. He ideado esta tesis como un mapa de carreteras que muestra el camino principal que seguimos en nuestras investigaciones, pero también los diversos desvíos que se produjeron por el camino. Es una recopilación de reflexiones, ideas, intuiciones y una suerte de vial a través del cual he intentado plasmar mi forma de experimentar la investigación en física teórica. Espero que la lectura de esta tesis sea de tu agrado, pero sobre todo deseo que sea útil para alguien, en algún lugar (de algún modo). No dudes en ponerte en contacto conmigo por cualquier motivo relacionado con este texto. Te lo agradezco de corazón., Este trabajo ha sido posible gracias a la financiación procedente del Gobierno de España a través de los proyectos PID2020-118159GB-C43, PID2020-118159GB-C44 (con contribución del FEDER), y por la Junta de Andalucía mediante el proyecto FQM219. Agradezco el apoyo económico de la beca CEX2021-001131-S financiada por MCIN/AEI/ 10.13039/501100011033, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis doctoral (DoctoralThesis)

Vacuum polarisation and regular gravitational collapse, Polarización de vacío y colapso gravitatorio regular

  • Boyanov, Valentin
Tesis leída en la Universidad Complutense de Madrid. Facultad de Ciencias Físicas, el 27/03/2023, [EN] It is the goal of this work to revisit and revise the problem of black hole (BH) formation and evolution in semiclassical gravity—a theory in which spacetime is treated classically, while matter admits a quantum description, coupling to gravity through an expectation value of a stress-energy tensor operator. Particularly, we analyse the vacuum expectation value of this operator for a test scalar field in spherically symmetric spacetimes in which trapped regions either form or are close to forming. First, we look at the magnitude of potential corrections to the spacetime evolution in the vicinity of outer horizons formed by collapsing matter in different dynamical regimes. We find that when the matter approaches an adiabatic collapse regime while close to forming a trapped region (i.e. close to crossing its Schwarzschild radius), the vacuum energy tends to grow unboundedly. This relates to the Boulware state divergence at horizons, which in turn can be related to the existence of static horizonless BH mimicker solutions to the semiclassical Einstein equations. This suggests that the growing vacuum energy in slow collapse regimes may stabilise the matter into a final horizonless configuration. We then look at how the dynamics of such horizonless ultracompact objects can lead to the emission of Hawking radiation (without the formation of trapped surfaces). We find that an oscillatory movement of its surface results in the emission of bursts of radiation, while a slow collapse which asymptotically approaches the crossing of the Schwarzschild radius can result in a thermal spectrum akin to that of BHs, but with a modified temperature. We also analyse the causal structure of the latter family of spacetimes (in which the formation of a trapped surface is approached asymptotically), finding that they posses an event horizon and either a Cauchy horizon, or two separate future (null and timelike) infinity regions in the interior and exterior. Finally, we look at the vacuum energy content in the vicinity of a BH inner horizon, a region of spacetime which is classically known to amplify perturbations in a highly non-linear manner. On a classical level, the evolution of the inner horizon in the presence of generic perturbations present in the astrophysical medium leads to the so-called “mass inflation instability”, wherein curvature around and below the initial position of the inner horizon grows exponentially, while the inner horizon itself tends to approach the origin. On a semiclassical level, we find a negative ingoing flux of energy, akin to the one which drives Hawking evaporation at the outer horizon. However, backreaction from this flux seems to indeed be amplified, growing exponentially and quickly overcoming of the Planck scale suppression suffered by semiclassical dynamics. Indeed, classical mass inflation and the semiclassical effect (which we dub inner horizon inflation) act in opposite ways on the inner horizon: one pushing it inwards and the other outwards. Analyses comparing the two effects suggest that the semiclassical one may dominate at late times, making it possible for the trapped region to disappear from the inside out, on a time scale much shorter than the Hawking evaporation time. As an aside, we find that the techniques used for analysing the semiclassical stability of the inner horizon can also be applied to other geometries with similar causal properties. In particular, we look at the geometry of a warp drive spacetime, and use its causal structure to argue that an instability previously found in 2-dimensional models can be avoided in higher dimensions. To complete the picture of BH objects in semiclassical gravity, we propose that, if trapped regions indeed disappear on short timescales, then the ultracompact objects observed astrophysically may indeed be horizonless BH mimickers, formed from slowly collapsing matter, the initial conditions for which are obtained after the dissipation from one or several iteration of trapped region formation, inner horizon inflation and recollapse., [ES]El objetivo de este trabajo es reexaminar y revisar el problema de la formaci ́on y evoluci ́on de agujeros negros en gravedad semicl ́asica, una teor ́ıa en la que el espaciotiempo se trata de forma cl ́asica, mientras que la materia admite una descripci ́on cu ́antica, acopl ́andose a la gravedad a trav ́es de un valor esperado de un operador tensor de energ ́ıa-momento. En particular, analizamos el valor esperado en vac ́ıo de este operador para un campo escalar de prueba en espaciotiempos esf ́ericamente sim ́etricos en los que se forman o est ́an a punto de formarse regiones atrapadas. En primer lugar, examinamos la magnitud de las potenciales correcciones a la evoluci ́on del espaciotiempo en las proximidades de horizontes externos formados por materia en colapso en diferentes reg ́ımenes din ́amicos. Encontramos que cuando la materia se aproxima a un r ́egimen de colapso adiab ́atico mientras est ́a cerca de formar una regi ́on atrapada (es decir, cerca de cruzar su radio de Schwarzschild), la energ ́ıa de vac ́ıo tiende a crecer ilimitadamente. Esto se relaciona con la divergencia presente en el estado de Boulware en horizontes, que a su vez se puede relacionar con la existencia de soluciones de las ecuaciones semicl ́asicas de Einstein de objetos est ́aticos sin horizonte capaces de imitar observacionalmente a los agujeros negros. Esto sugiere que la creciente energ ́ıa de vac ́ıo en los reg ́ımenes de colapso lento puede estabilizar la materia en una configuraci ́on final sin horizonte. Despu ́es, estudiamos c ́omo la din ́amica de tales objetos ultracompactos sin horizonte puede conducir a la emisi ́on de radiaci ́on de Hawking (sin la formaci ́on de superficies atra- padas). Encontramos que un movimiento oscilatorio de su superficie da lugar a la emisi ́on de r ́afagas de radiaci ́on, mientras que un colapso lento que se aproxime asint ́oticamente al cruce del radio de Schwarzschild puede dar lugar a un espectro t ́ermico similar al de los agujeros negros, pero con una temperatura modificada. Tambi ́en analizamos la es- tructura causal de esta ́ultima familia de espaciotiempos (en los que la formaci ́on de una superficie atrapada se aproxima asint ́oticamente), encontrando que poseen un horizonte de sucesos y, o bien un horizonte de Cauchy, o bien una separaci ́on en dos de la regi ́on asint ́otica futura (de g ́enero tiempo y nulo) entre el interior y el exterior. Por ́ultimo, examinamos el contenido de energ ́ıa de vac ́ıo en las proximidades del hor- izonte interno de un agujero negro, una regi ́on del espaciotiempo cl ́asicamente conocida por su amplificaci ́on no lineal de perturbaciones. A nivel cl ́asico, la evoluci ́on del hori- zonte interno en presencia de perturbaciones gen ́ericas presentes en el medio astrof ́ısico conduce a la inestabilidad llamada ”inflaci ́on de masa”, debido a la que la curvatura alrededor y por debajo de la posici ́on inicial del horizonte interno crece exponencial- mente, mientras que el propio horizonte interno tiende a acercarse al origen. A nivel semicl ́asico, encontramos un flujo de energ ́ıa entrante negativo, similar al responsable de la evaporaci ́on de Hawking del horizonte externo. Sin embargo, el efecto que tiene este flujo sobre la geometr ́ıa parece ser amplificado, creciendo exponencialmente y superando r ́apidamente la supresi ́on Planckiana que sufre la din ́amica semicl ́asica. De hecho, la inflaci ́on de masa cl ́asica y el efecto semicl ́asico (que denominamos inflaci ́on del horizonte interno) act ́uan de forma opuesta sobre el horizonte interno: uno lo empuja hacia dentro y el otro hacia fuera. Los an ́alisis que comparan ambos efectos sugieren que el semicl ́asico puede dominar en tiempos tard ́ıos, haciendo posible que la regi ́on atrapada desaparezca desde dentro hacia fuera, en una escala temporal mucho m ́as corta que el tiempo de evaporaci ́on de Hawking. Adicionalmente, observamos que las t ́ecnicas utilizadas para analizar la estabilidad semicl ́asica del horizonte interno tambi ́en pueden aplicarse a otras geometr ́ıas con propiedades causales similares. En particular, examinamos la geometr ́ıa de un espaciotiempo de warp drive y utilizamos su estructura causal para argumentar que una inestabilidad encontrada previamente en modelos bidimensionales puede evitarse en dimensiones m ́as altas. Para completar la imagen de los agujeros negros en gravedad semicl ́asica, proponemos que, si las regiones atrapadas desaparecen en escalas de tiempo cortas, los objetos ultra- compactos observados astrof ́ısicamente pueden ser imitadores de agujeros negros que no tienen horizonte, formados a partir de materia que colapsa lentamente, cuyas condiciones iniciales se obtienen tras la disipaci ́on de una o varias iteraciones de formaci ́on de regiones atrapadas, inflaci ́on del horizonte interno y recolapso., I acknowledge financial support from the Spanish Government through the fellowship FPU17/04471, as well as the projects PID2020-118159GB-C43 and PID-2020-118159GB- C44., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001131-S)., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis doctoral (DoctoralThesis)

Electron thermal runaway in atmospheric electrified gases: a microscopic approach

  • Schmalzried, A.
Tesis del Departamento de Sistema Solar, Instituto de Astrofísica de Andalucía. Universidad de Granada. Escuela de doctorado de Ciencias, Tecnologías e Ingenierías. Programa de doctorado en Física y Ciencias del Espacio. Leída en el Salón de Actos del IAA el 30 de octubre del 2023, a las 10:30 h ., [EN] In recent years, electric discharges have been found to be prolific sources of high-energy radiation [2, 252, 267]. In particular, terrestrial gamma ray flashes are observed in correlation to lightning activity [725] and bursts of X-rays are measured in experiments with laboratory sparks [517]. The gamma/X-ray photons are produced from Bremsstrahlung (braking radiation) of fast electrons scattering from atomic nuclei present in the vicinity of the discharge. The fast electrons may themselves either be spawned by cosmic radiation or accelerated in very intense and localised electric fields in the discharge. The latter mechanism (acceleration) is the one studied in this thesis and denominated as “thermal electron runaway”. In the current state of knowledge, it poses many challenges to our understanding of discharges. For instance, the fluence of X-rays (number of photons traversing a unit area) surpasses the one predicted by current models of thermal runaway in discharges. Concretely, the probability of accelerating a thermal electron to high energies, where it radiates through bremsstrahlung, is found to be too low at typical electric fields encountered at the head of streamers (self-sustained ionisation waves). Conversely, the plausibility of very high electric fields which enable thermal runaway is uncertain. From the modelling perspective, the abundance of thermal runaway electrons has been found to depend strongly on the model chosen to represent electron scattering with molecules [169, 218, 677]. In particular, in a comparative study [811], we showed that various models of elastic scattering give significantly different distributions of high-energy electrons. Hence, we identify two necessities precluding a sound study of thermal runaway: 1. Find a physical environment, composed of the electric field and the state of air, that fosters the conditions which enable thermal runaway. Then, in this environment, be able to model events of extreme rarity, down to arbitrarily low probabilities. 2. Possess a highly reliable and accurate modelling of electron-molecule collisions, consistent throughout a broad energy range: from zero to several MeV. The first necessity is answered by the first part of the thesis where we investigate the abundance of high-energy electrons obtained in Monte Carlo simulations under various conditions of the electric field, the air composition and temperature. In a second article [813], we adapted the Monte Carlo importance sampling methodology into a “compaction” algorithm which enhances the statistics of high-energy electrons to an arbitrarily low probability of occurrence, however, at the cost of deteriorating the resolution of low-energy electrons. The second necessity is addressed in the second part of the thesis, where an almost complete set of electron-molecule cross sections has been assembled independently from the databases that are currently in use. The assembly combined an exhaustive gathering (up to 2022) of experimental cross sections, accurate quantum mechanical calculations and simple analytical representations. The modelling of elastic scattering is based on our third article [812] for calculating differential cross sections of electrons scattering elastically from diatomic molecules. Furthermore, this thesis also contains a third part which supplements the first two parts with a thorough documentation of the process for constructing the new cross section database. It provides an overview of techniques for fitting experimental data and comparisons of various electron-molecule cross section databases currently in use. So far, most of the literature has focussed on plausible mechanisms which lead to formation of intense electric fields in ionisation fronts. In this thesis, we turned toward a less frequented perspective by considering the change in chemical composition of air due to the discharge activity preceding thermal runaway. Contrary to the wont applied to dissertations in the sciences, this thesis is an original work which does not include text extracted from the publications written during the doctoral program. It is therefore not to be regarded as a reformulation of the content of these articles [811–813], but as the prime continuation thereof. With the wherewithal that we developed – the compaction algorithm and the new set of cross sections – we have probed preliminarily the phenomenon of electron thermal runaway in hitherto understudied territories; low electric fields and varying gaseous compositions. As an open conclusion, we fancy that preconditioning of the gaseous medium by streamer coronas is relevant to unveil some of the mysteries shrouding our current understanding of thermal runaway, [ES] Desde hace poco se sabe que los rayos de tormentas en la Tierra son fuentes prolíficas de radiación de alta energía [2, 252, 267]. En particular, se han observado destellos terrestres de rayos gamma, con duración de poco más de 1 ms asociados a la actividad de rayos de tormenta [725]. Así mismo se han detectado estallidos de rayos-X emitidos por chispas en laboratorios [517]. Los fotones gamma o X de estos destellos están producidos por Bremsstrahlung (radiación de frenado) de electrones rápidos desviados por los núcleos de los atomos presentes cerca de las descargas. Esos electrones rápidos pueden ser engendrados como productos secundarios de ionización por rayos cósmicos o bien ser acelerados desde energías más bajas en campos eléctricos en las descargas muy intensos y localizados. Este último mecanismo (la aceleración) se conoce cómo runaway térmico y su estudio es el tema principal de la presente tésis. Actualmente, desconocemos la relación precisa entre estre proceso y la física de las descargas. Por ejemplo, la fluencia medida de rayos-X (número de fotones atravesando una superficie unitaria) supera las predicciones de modelos teóricos del runaway térmico en descargas. La probabilidad de acelerar un electron térmico hasta energías altas en las cuales empieza a irradiar por bremsstrahlung es demasiado baja en los campos eléctricos cerca de las cabezas de los dardos (canales de ionización llamados streamers en inglés). Los campos eléctricos necesarios para el runaway térmico son aún más altos y por tanto poco plausibles. En los modelos físicos, la abundancia de electrones térmicos en runaway depende mucho de cómo se describe la dispersión de electrones por moléculas [169, 218, 677]. En particular, en un estudio comparativo [811], hemos demostrado que varios modelos de dispersión elástica dan lugar a distribuciones significativamente diferentes de electrones de alta energía. De ahí, hemos identificado dos necesidades para dar una base sólida al estudio del runaway térmico: 1. Hallar un entorno físico apropiado, incluyendo el campo eléctrico y el estado del aire. Es necesario tener la capacidad del modelizar eventos de rareza extrema en este ambiente, con probabilidades arbitrariamente bajas. 2. Poseer un modelo altamente fiable y preciso de la colisiones de electrones con moléculas que sea consistente en un rango amplio de energías: desde cero hasta varios MeV. La primera parte de la tesis da respuesta a la primera necesidad; en ella investigamos la abundancia de electrones de alta energía obtenidos en simulaciones Monte Carlo bajo varias condiciones de campo eléctrico y de composición y temperature del aire. En nuestro segundo artículo [813], adaptamos la técnica del muestreo de importancia (importance sampling) en simulaciones de Montecarlo para implementar un algoritmo de compactación que mejora la estadística de electrones de alta energía a cambio de deteriorar la resolución sobre electrones de baja energía. La segunda parte de la tesis abarca la segunda necesidad. En esta parte compilamos una colección casi completa de secciones eficaces de colisión entre electrones y moléculas independiente de bases de datos actualmente usadas. Empleamos una recopilación exhaustiva hasta 2022 de secciones eficaces experimentales, cálculos precisos de mecánica cuántica junto a representaciones analíticas sencillas. El modelado de dispersión elástica está basado en nuestro tercer artículo [812], en el que calculamos seciones eficaces diferenciales de dispersión elástica de electrones por moléculas diatómicas. Además, la tésis contiene también una tercera parte que suplementa las dos primeras y contiene una documentación minuciosa del proceso de construcción de la nueva base de datos de secciones eficaces. Provee una reseña de técnicas de ajuste de datos experimentales y comparaciones entre varias bases de datos de secciones eficaces de colisiones entre electrones y moléculas actualmente usadas. Hasta ahora, la mayoría de la literatura se ha centrado en vías plausibles de formación de campos eléctrico intensos en frentes de ionización. En esta tesis hemos cambiado la perspectiva hacia el efecto que conlleva un cambio en la composición química del aire debido a la actividad de descarga que precede el runaway térmico. La tesis extiende y completa los trabajos publicados anteriormente [811–813]. Con los medios que hemos desarrollado –el algoritmo de compactación y la nueva base de datos de secciones eficaces– hemos explorado el fenómeno de runaway térmico de electrones en territorios hasta ahora poco estudiados: en campos eléctricos más bajos y en composiciones gaseosas variables. Planteamos la hipótesis de que el preacondicionamiento del medio gaseoso por coronas de dardos es relevante en el proceso de runaway térmico., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis doctoral (DoctoralThesis)

Propiedades físicas de objetos trans-neptunianos y centauros combinando técnicas fotométricas, astrométricas, radiométricas y de ocultación estelar

  • Vara-Lubiano, M.
Tesis del Departamento de Sistema Solar, Instituto de Astrofísica de Andalucía. Universidad de Granada. Escuela de doctorado de Ciencias, Tecnologías e Ingenierías. Programa de doctorado en Física y Ciencias del Espacio. Leída el 1 de diciembre de 2023 a las 12h en el Salón de Actos del edificio Mecenas de la Universidad de Granada (Sala ENIAC)., Los objetos trans-Neptunianos constituyen una de las poblaciones más interesantes del sistema solar. Se trata de una población de cuerpos menores que se encuentra orbitando alrededor del Sol en órbitas con semiejes mayores más grandes que el de Neptuno, en una estructura conocida como el cinturón trans-Neptuniano. Estos objetos están considerados los remanentes menos evolucionados de nuestro sistema planetario, ya que las grandes distancias que los separan del Sol los han mantenido protegidos de los procesos evolutivos habituales. Por ello, del estudio de las propiedades físicas de estos objetos desde un punto de vista colectivo se puede obtener mucha información sobre los procesos que dieron forma a la nebulosa planetaria que evolucionó hasta lo que hoy conocemos como sistema solar. Sin embargo, debido a las grandes distancias que los separan de la Tierra, y a que la mayoría de los objetos conocidos de esta población tienen albedos bajos y tamaños pequeños, son difíciles de observar con telescopios terrestres, por lo no disponemos aún de mucha información de la mayoría de estos objetos. Esta tesis se engloba en un proyecto dedicado al estudio de las propiedades físicas de objetos trans-Neptunianos y centauros (una población relacionada dinámicamente con la de los trans-Neptunianos) que lleva en curso más de dos décadas, y que cuenta con numerosas publicaciones asociadas al estudio de las propiedades físicas de estos cuerpos, entre las que destacan los hallazgos de anillos alrededor de los objetos Chariclo, Quirón, Haumea y, el más reciente, Quaoar. Para el estudio de estas propiedades físicas, durante el transcurso de esta tesis hemos utilizado técnicas fotométricas, radiométricas y de ocultaciones estelares. Ésta última ha demostrado ser una técnica muy potente a la hora de determinar formas y tamaños de objetos trans-Neptunianos con gran precisión, sólo superada por la que se alcanza con misiones espaciales. Además permite la detección de componentes secundarios como pueden ser anillos, satélites, atmósferas o jets. En combinación con un estudio fotométrico, esta técnica permite obtener la forma tridimensional y el volumen de estos pequeños cuerpos, además de su orientación en el espacio. Si se conoce la masa del objeto, por ejemplo porque tenga uno o varios satélites, se puede derivar la densidad. Este parámetro es el Santo Grial de nuestra investigación, pues gracias a él podemos inferir información de la composición y estructura interior de estos objetos, a los que no tenemos acceso observacional directo. En esta tesis se presentan las propiedades físicas obtenidas para tres objetos trans-Neptunianos y un centauro a partir de la combinación de ocultaciones estelares con estudios fotométricos y radiométricos., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis doctoral (DoctoralThesis)

Valorization of marine biomass for the development of biopolymeric materials and additives with functional properties, Valorización de biomasa marina para el desarrollo de materiales biopoliméricos y aditivos con propiedades funcionales

  • Cebrián Lloret, Vera
[EN] This doctoral thesis focused on the valorization of different sources of marine biomass with the main purpose of developing biopolymeric materials and ingredients for the food industry. Thus, in the first part of the thesis, the valorization of biomass from different algae species was carried out to identify compounds of interest and assess their potential to produce biopolymeric materials and protein-rich food ingredients. Among these species was Ruguloperyx okamurae, an invasive brown seaweed that poses a threat to marine ecosystems. However, this species was shown to have significant potential as a sustainable source of bioactive compounds, transforming its role as a threat into a valuable opportunity. Red seaweed biomass was also highlighted for its potential in a variety of applications, including the development of cost-effective and environmentally friendly materials for food applications obtained through minimal processing. In this context, the composition and structure of the algal cell walls played a crucial role in understanding how each species behaves during processing and in the properties of the resulting films. In addition to the production of biopolymeric materials, red seaweeds were also studied as a source of proteins for human consumption. Although native seaweeds had low digestibility, this was improved through processing. However, it is important to note that, despite the improvement in digestibility, processing could induce the degradation of more labile amino acids, having a negative impact on the nutritional quality of the proteins. In the second part of this thesis, several species of red seaweeds were explored to extract agar more efficiently by simplified methods, and the suitability of the extracts obtained to develop biopolymeric materials and hydrogels for food applications was evaluated. It could be observed that the degree of agar purification had a significant impact on the final properties of both films and hydrogels. In the case of films, those made of pure agar exhibited superior properties; however, they underwent significant changes in their semicrystalline structure during storage. In contrast, those films derived from less purified agar extracts showed greater stability over time, suggesting the potential of less purified agars as additives to reduce costs and improve the stability of pure agar films. Regarding the hydrogels, agar purification led to the formation of hydrogels with significantly higher strength and hardness. On the other hand, the simplified extraction protocol produced less purified agar fractions containing other compounds such as proteins, polyphenols, and minerals. Although this resulted in less rigid and resistant hydrogels, this feature could be advantageous for the production of hydrogels with bioactive properties. In the third and last part of the thesis, the valorization of industrial wastes generated after alginate extraction was addressed, with the purpose of obtaining cellulosic fractions by simplified methods for their application in the production of biopolymeric materials. In this context, it was observed that the residues of Alaria esculenta and Saccharina latissima were suitable for the extraction of cellulosic fractions, while Ascophyllum nodosum might be more interesting for the production of fucoidan-rich extracts. Cellulosic fractions with higher purity produced films with more desirable mechanical properties and visual appearance. Conversely, less purified fractions presented a greater barrier to water vapor. According to the results, it was determined that the simple application of an alkaline treatment could produce cellulosic fractions that resulted in films with an optimal balance between functional properties and economic and environmental efficiency in biopolymeric material production., [ES] Esta tesis doctoral se centró en la valorización de diferentes fuentes de biomasa marina con el propósito principal de desarrollar materiales biopoliméricos e ingredientes destinados a la industria alimentaria. Así pues, en la primera parte de la tesis, se llevó a cabo la valorización de la biomasa de diversas especies de algas con el objetivo de identificar compuestos de interés y evaluar su potencial para la producción de materiales biopoliméricos e ingredientes alimentarios ricos en proteínas. Entre estas especies se encontraba Ruguloperyx okamurae, un alga parda invasora que representa una amenaza para los ecosistemas marinos. No obstante, se demostró que esta especie posee un potencial significativo como fuente sostenible de compuestos bioactivos, transformando su papel de amenaza en una valiosa oportunidad. La biomasa de las algas rojas también destacó por su potencial en diversas aplicaciones, incluyendo el desarrollo de materiales rentables y respetuosos con el medio ambiente para aplicaciones alimentarias obtenidos mediante de un procesado mínimo. En este contexto, la composición y la estructura de las paredes celulares de las algas desempeñaron un papel fundamental para entender cómo se comporta cada especie durante el procesado y en las propiedades de las películas resultantes. Además de la producción de materiales biopoliméricos, también se estudiaron las algas rojas como fuente de proteínas para el consumo humano. Aunque las algas nativas presentaron una baja digestibilidad, esta mejoró mediante su procesado. No obstante, es importante destacar que, a pesar de esta mejora en la digestibilidad, esta mejoró mediante su procesado. No obstante, es importante destacar que, a pesar de esta mejora en la digestibilidad, el procesado podía inducir la degradación de los aminoácidos más lábiles, lo que repercutía negativamente en la calidad nutricional de las proteínas. En la segunda parte de esta tesis, se exploraron varias especies de algas rojas para extraer agar de forma más eficiente mediante métodos simplificados, y se evaluó la idoneidad de los extractos obtenidos para desarrollar materiales biopoliméricos e hidrogeles para aplicaciones alimentarias. Se pudo observar que el grado de purificación del agar tuvo un impacto significativo en las propiedades finales tanto de las películas como de los hidrogeles. En el caso de las películas, las fabricadas con agar puro presentaron propiedades superiores; sin embargo, sufrieron cambios significativos en su estructura semicristalina durante el almacenamiento. Por el contrario, las películas derivadas de extractos de agar menos purificados mostraron una mayor estabilidad a lo largo del tiempo, sugiriendo su potencial como aditivo para reducir costes y mejorar la estabilidad de las películas de agar puro. En el caso de los hidrogeles, la purificación del agar condujo a la formación de hidrogeles con una resistencia y dureza significativamente altas. Por otro lado, el protocolo de extracción simplificado produjo fracciones de agar menos purificadas que contenían compuestos adicionales como proteínas, polifenoles y minerales. Aunque esto dio lugar a hidrogeles menos rígidos y resistentes, esta característica podría ser beneficiosa para la producción de hidrogeles con propiedades bioactivas. En la tercera y última parte de la tesis, se abordó la valorización de los residuos industriales generados tras la extracción de alginato, con el propósito de obtener fracciones de celulosa mediante métodos simplificados para su aplicación en la producción de materiales biopoliméricos. En este contexto, se observó que los residuos de Alaria esculenta y Saccharina latissima resultaron adecuados para la extracción de fracciones celulósicas, mientras que Ascophyllum nodosum podría ser más interesante para la producción de extractos ricos en fucoidano. Las fracciones de celulosa con mayor pureza generaron películas con propiedades mecánicas y aspecto visual más deseables. En cambio, las fracciones menos purificadas presentaron una mayor barrera al vapor de agua. De acuerdo con los resultados, se determinó que la simple aplicación de un tratamiento alcalino puede producir fracciones de celulosa que dan lugar a películas con un equilibrio óptimo entre propiedades funcionales y eficiencia económica y medioambiental., [CAT] Aquesta tesi doctoral es va centrar en la valorització de diferents fonts de biomassa marina amb el propòsit principal de desenvolupar materials biopolimèrics i ingredients destinats a la indústria alimentària. Així doncs, en la primera part de la tesi, es va dur a terme la valorització de la biomassa de diverses espècies d'algues amb l'objectiu d'identificar compostos d'interés i avaluar el seu potencial per a la producció de materials biopolimèrics i ingredients alimentaris rics en proteïnes. Entre aquestes espècies es trobava Ruguloperyx okamurae, una alga marró invasora que representa una amenaça per als ecosistemes marins. No obstant això, es va demostrar que aquesta espècie posseeix un potencial significatiu com a font sostenible de compostos bioactius, transformant el seu paper d'amenaça en una valuosa oportunitat. La biomassa de les algues roges també va destacar pel seu potencial en diverses aplicacions, incloent-hi el desenvolupament de materials rendibles i respectuosos amb el medi ambient per a aplicacions alimentàries obtinguts mitjançant d'un processament mínim. En aquest context, la composició i l'estructura de les parets cel·lulars de les algues van exercir un paper fonamental per a entendre com es comporta cada espècie durant el processament i en les propietats de les pel·lícules resultants. A més de la producció de materials biopolimèrics, les algues roges també es van estudiar com a font de proteïnes per al consum humà. Encara que les algues natives van presentar una baixa digestibilitat, aquesta va millorar mitjançant el seu processament. No obstant això, és important destacar que, malgrat aquesta millora en la digestibilitat, el processament podia induir la degradació dels aminoàcids més làbils, la qual cosa repercutia negativament en la qualitat nutricional de les proteïnes. En la segona part d'aquesta tesi, es van explorar diverses espècies d'algues roges per a extraure agar de manera eficient mitjançant mètodes simplificats i es va avaluar la idoneïtat dels extractes obtinguts per a desenvolupar materials biopolimèrics i hidrogels per a aplicacions alimentàries. Es va poder observar que el grau de purificació de l'agar va tindre un impacte significatiu en les propietats finals tant de les pel·lícules com dels hidrogels. En el cas de les pel·lícules, les fabricades amb agar pur van presentar propietats superiors; no obstant això, van patir canvis significatius en la seua estructura semicristal·lina durant l'emmagatzematge. No obstant això, les pel·lícules derivades d'extractes d'agar menys purificats van mostrar una major estabilitat al llarg del temps, suggerint el seu potencial com a additiu per a reduir costos i millorar l'estabilitat de les pel·lícules d'agar pur. En el cas dels hidrogels, la purificació de l'agar va conduir a la formació d'hidrogels amb una resistència i duresa significativament altes. D'altra banda, el protocol d'extracció simplificat va produir fraccions d'agar menys purificades que contenien compostos addicionals com a proteïnes, polifenols i minerals. Encara que això va donar lloc a hidrogels menys rígids i resistents, aquesta característica podria ser beneficiosa per a la producció d'hidrogels amb propietats bioactives. En la tercera i última part de la tesi, es va abordar la valorització dels residus industrials generats després de l'extracció d'alginat, amb el propòsit d'obtindre fraccions de cel·lulosa mitjançant mètodes simplificats per a la seua aplicació en la producció de materials biopolimèrics. En aquest context, es va observar que els residus de Alaria esculenta i Saccharina latissima van resultar adequats per a l'extracció de fraccions cel·lulòsiques, mentre que Ascophyllum nodosum podria ser més interessant per a la producció d'extractes rics en fucoidans. Les fraccions de cel·lulosa amb major puresa van generar pel·lícules amb propietats mecàniques i aspecte visual més desitjables. En canvi, les fraccions menys purificades van presentar una major barrera al vapor d'aigua. D'acord amb els resultats, es va determinar que la simple aplicació d'un tractament alcalí pot produir fraccions de cel·lulosa que donen lloc a pel·lícules amb un equilibri òptim entre propietats funcionals i eficiència econòmica i mediambiental., This work was financially supported by the “Agencia Estatal de Investigación” (PCI2018-092886 Grant) and co-funded by the European Union’s Horizon 2020 research and innovation programme (ERA-Net SUSFOOD2) and by the grant TED2021-129711B-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR. This work was done within the framework of a collaboration with HISPANAGAR S.L (Burgos, Spain). The research was funded by the Spanish Ministry of Science, Innovation and Universities through projects PID2020-114821RB-I00, PID2020-117744RJ-I00, as well as CEX2021-001189-S, funded by MCIN/AEI/10.13039/501100011033. The authors also acknowledge funding through project CIRCALGAE (Horizon Europe) under grant agreement 101060607. In all projects, funding from “ERDF A way of making Europe”, the “European Union” or the “European Union NextGenerationEU/PRTR” is also acknowledged., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001189-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis doctoral (DoctoralThesis)

The quasar main sequence at early cosmic epochs

  • Deconto Machado, Alice
Tesis del Departamento de Astronomía Extragaláctica, Instituto de Astrofísica de Andalucía. Programa de doctorado en Física y Matemáticas. Universidad de Granada. Leída en el Salón de Actos del IAA el 30 de octubre del 2024, a las 11:00 h., [EN] The Main Sequence (MS) of quasars emerged, in the early 2000s, as a powerful tool to contextualise and organise the observed spectroscopic diversity of the quasars on different spectral types according to key observational (in optical, UV, and X-rays) and physical parameters that are systematically changing along it and mainly driven by the accretion rate on to the central black hole. However, the work on the MS has been restricted mainly to low redshift (z < 1), where it is well established. Little is known about the MS at earlier cosmic epochs and high luminosity, because the most widely used parameters for its definition are shifted into the infrared domain, where spectroscopy of large samples is more difficult. This thesis aims to evaluate for the first time the behaviour of the MS at high redshift, focusing on the interplay between feedback mechanisms and the radio-loudness effect in the accretion processes of Active Galactic Nuclei (AGN). Feedback from AGN is seen as one of the main contributors to the evolutionary process of galaxies, although their impact on host galaxies are still pending on detailed analysis. Specially at high and intermediate redshift, many sources seem to harbour a powerful central mechanism that allows for strong jets in radio and/or winds observed in the optical and UV ranges of their spectra. The analysis of the spectroscopic properties of these objects may be helpful to better understand the behaviour of these processes. By decomposing the broad emission line profiles into 3 or more components and analysing the blueshifted component, we are able to estimate the feedback contribution. Usually, high-ionisation lines such as CIVλ1549 tend to present a more significant blueward asymmetry, while in Hβ for instance the contribution is not that strong (although present, in some cases). A good indicator of feedback in the optical range is often [O III]λ5007, while in the UV notable blueshifted components can be seen in the many blends of the UV region. Another important factor to be considered within the domain of AGN is the role of radio emission. In the context of the quasar MS at low redshifts, it is observed that radio-loud sources are primarily associated with Population B sources, which are characterised by quasars where minimal to no outflow motions are detected. The comparison between the strong C IVλ1549 high-ionisation line and Hβ in terms of line widths and shifts with respect to rest-frame leads to an evaluation of the role of radiative forces in driving an accretion disk wind. While for non-jetted quasars the wind properties have been more extensively characterised as a function of luminosity and other physical parameters, the situation is by far less clear for jetted sources. The overarching issue is the effect of the relativistic jet on the wind, and on the structure of the emitting region in general. In the redshift range that we are considering, the high-ionisation lines in the UV in the quasar rest-frame are redshifted into the optical domain, while the Hβ+[O III] spectral region is shifted into the near-infrared. Observations covering the Hβ spectral region were collected with the infrared spectrometer ISAAC at ESO-VLT. They make it possible to obtain an accurate measurement of the quasar rest-frame and to set the location of a quasar along the MS. In addition, the knowledge of the rest-frame allows for a quantitative comparison between low- and high-ionisation lines. Regarding the UV, the study is performed using mainly the archival data from the Sloan Digital Sky Survey (SDSS).The radio data analysed in this thesis were collected mainly from the 1.4-GHz NRAO VLA Sky Survey (NVSS) and the VLA FIRST Survey. Along this thesis, an interline comparison has been performed with the aim to highlight the similarities found between the optical and UV ranges. In Part I, we are finding significant outflows not only in [O III]λ5007 but also in lines with broader profiles such as Hβ and C IVλ1549, hinting at an association with the Broad Line Region emission. We are finding extremely broad [O III]λ5007 emission, comparable to the width of the Hβ broad profile in some highly accreting quasars. Additionally, emission lines like [O iii]λλ4959,5007 and CIVλ1549 appear to follow very similar trends. Both [O III]λ5007 and CIVλ1549 outflows show very high amplitudes and a high degree of correlation, which may indicate a possible physical connection between the inner and outer outflows. This result mirrors the behaviour observed at low redshift for sources whose high-ionisation lines are dominated by an outflow component. At variance to the low-z samples, more than 60% of our high-z objects show [OIII]λ5007 blueshift larger than 250 km s−1. The main factor governing the outflows in both [O iii]λλ4959,5007 and CIVλ1549 is most likely the Eddington ratio, with a non-negligible role of luminosity affecting shift amplitudes. In Part II, we discuss the radio dichotomy and the relation between radio and optical/UV properties. High-ionisation lines especially in radio-quiet sources usually present a significant asymmetry towards the blue that is strong evidence of outflow motions. In contrast, radio-loud quasars commonly display relatively modest outflowing components. The strongest radio emitters are also found with the more symmetric profiles in both UV and optical ranges. Our analysis suggest that the radio emission seems to somehow contribute to smaller outflows, and that the strongest outflows in both [O III]λ5007 and C IVλ1549 are caused mainly by accretion. The Part III of this thesis explores how intermediate ionisation emission lines in the UV can be suitable to serve as virial broadening estimators for black hole mass computation at high and low redshift. We derive scaling laws using the Al iiiλ1860 doublet and the Ciii]λ1909 emission lines, since the line width of these lines are highly correlated with the one of Hβ, and consequently can be considered as equivalent for the majority of Population A quasars (usually high accretors) over five orders of magnitude in luminosity. Last, in Part IV we have analysed a small sample of radio-loud and radio-quiet quasars, and a preliminary analysis reveals that RL show sub-solar chemical abundances, lower compared to RQ. Additionally, our findings suggest that there is a gradient of metallicity across Pop. A and Pop. B, shedding light on their evolutionary paths., [ES] La Secuencia Principal (MS, del inglés Main Sequence) de los cuásares surgió a princípios de los años 2000 como una herramienta poderosa para contextualizar y organizar la diversidad espectroscópica observada en los cuásares, distinguiendo diferentes tipos espectrales que respondían a parámetros observacionales clave e independientes (en óptico, UV y rayos X) y cuyos parámetros físicos asociados mostraban variaciones sistemáticas a lo largo de la secuencia, impulsados principalmente por la tasa de acreción sobre el agujero negro supermasivo central. Sin embargo, desde el establecimiento de la MS, su estudio ha estado limitado principalmente a cuásares a bajo corrimiento al rojo (redshift, z < 1), donde fue inicialmente establecida. Poco se conoce sobre la MS en épocas cósmicas más tempranas y en objetos de alta luminosidad, debido en parte a que los parámetros más utilizados para su caracterización se desplazan hacia el dominio infrarrojo, donde la espectroscopia en grandes muestras es más difícil. Esta tesis tiene entre sus objetivos evaluar, por la primera vez, el comportamiento de la MS a altos corrimientos al rojo, centrándose también en la interacción entre los mecanismos de retroalimentación entre el agujero negro supermasivo central y la galaxia anfitriona (en adelante feedback) y los efectos de la emisión en radio frecuencias sobre los procesos de acreción de los Núcleos Activos de Galaxias (AGN). El feedback de los AGN se considera uno de los principales contribuyentes al proceso evolutivo de las galaxias, aunque su impacto sobre las galaxias anfitrionas aún requiere un mayor desarrollo y análisis detallado. Especialmente en corrimientos al rojo intermedios y altos, muchas fuentes parecen albergar un mecanismo central potente que permite la presencia de jets intensos en radio y vientos (outflows) que se observan en los rangos óptico y UV de sus espectros. El análisis de las propiedades espectroscópicas de estos objetos puede ser clave para comprender mejor el comportamiento de estos procesos. Al descomponer los perfiles de las líneas de emisión anchas en todas sus componentes, en general en tres o incluso más componentes, e identificar y analizar la componente desplazada hacia el azul, es posible estimar la contribución del feedback. Generalmente, las líneas de alta ionización, como CIVλ1549, tienden a mostrar una asimetría significativa hacia el azul, mientras que en líneas anchas de baja ionización como Hβ, por ejemplo, la contribución es mucho menor (aunque está presente en algunos casos). Un buen indicador de feedback en el rango óptico es frecuentemente [O III]λ5007, mientras que en el UV se pueden observar componentes desplazados al azul en muchas de las líneas anchas de emisión y blends presentes en esa región espectral. Otro factor importante a considerar en el ámbito de los AGN es el papel de la emisión en radio frecuencias. En el contexto de la Secuencia Principal de los cuásares a bajo corrimiento al rojo, se observa que las fuentes intensas emisoras en radio (RL) están asociadas principalmente con los objetos de Población B, caracterizados por cuásares en los que se detectan mínimos o nulos desplaza- mientos hacia el azul (también llamados de outflows e identificados con la presencia de vientos). La comparación entre la línea de alta ionización de C IVλ1549 y Hβ (de baja ionización) en términos de anchura de las líneas y desplazamientos respecto a la velocidad de referencia del cuásar (en adelante rest-frame) permite evaluar el papel de las fuerzas radiativas en la generación de vientos intensos en el disco de acreción. Mientras que para los cuásares sin jets relativistas (RQ) en radio las propiedades del viento han sido más extensamente caracterizadas en función de la luminosidad y otros parámetros físicos, la situación es mucho menos clara para las fuentes con jets relativistas y emisión intensa en radio. Una cuestión importante a dilucidar en este tema es el efecto del jet relativista sobre el viento (y los correspondientes outflows), así como sobre la propia estructura de la región emisora en general. En el rango de corrimiento al rojo que estamos considerando, las líneas de alta ionización en el UV en el rest-frame de los cuásares se desplazan al ominio óptico, mientras que la región espectral de Hβ+[O III] se desplaza hacia el infrarrojo cercano. Las observaciones de la región espectral de Hβ se realizaron con el espectrómetro infrarrojo ISAAC en el telescopio VLT de la ESO (Chile). Estas observaciones nos permiten obtener una medida precisa del rest-frame de cada cuásar y situarlo en la Secuencia Principal, identificando su tipo espectral. Además, el conocimiento del rest-frame posibilita una comparación cuantitativa entre las líneas de baja y alta ionización. En cuanto al UV, para el estudio realizado se han utilizado principalmente datos del archivo espectroscópico del Sloan Digital Sky Survey (SDSS). Los datos en radio analizados en esta tesis provienen principalmente de los mapeos a 1.4 GHz del NRAO VLA Sky Survey (NVSS) y del VLA FIRST Survey. A lo largo de esta tesis, se ha realizado una comparación entre líneas con el objetivo de resaltar las similitudes entre los rangos óptico y UV. En los estudios presentados en la la Parte I, se han detectado outflows significativos no solo en [O III]λ5007, sino también en líneas con perfiles anchos, como Hβ y C IVλ1549, lo que sugiere una asociación con la emisión proveniente de la región de líneas anchas (BLR, del inglés broad line region). Se muestra la existencia de una emisión extremadamente ancha en [O III]λ5007, comparable con la anchura del perfil de Hβ en cuásares con alta tasa de acreción. Además, líneas de emisión como [O III]λλ4959,5007 y CIVλ1549 parecen seguir tendencias muy similares. Tanto los outflows de [O III]λ5007 como los de C IVλ1549 muestran amplitudes muy altas y un alto grado de correlación, lo que podría indicar una posible conexión física entre los outflows producidos en la parte más interna y los producidos en la parte más externa del AGN. Este resultado parece reproducir el comportamiento observado en la población (minoritaria) de cuásares a bajo corrimiento al rojo en los que líneas de alta ionización como [O III]λ5007 están dominadas por una componente de outflow. Sin embargo, a diferencia de las muestras a bajo z, más del 60% de nuestros objetos a alto z muestran un desplazamiento al azul de [O III]λ5007 mayor que 250 km s−1. Encontramos que el principal factor que gobierna los outflows de [O III]λλ4959,5007 y C IVλ1549 es la relación de Eddington (tasa de acreción), con un efecto de segundo orden, no despreciable, de la luminosidad del AGN asobre la amplitud de los desplazamientos al azul. En la Parte II de la tesis, se aborda la dicotomía de loa cuásares en radio (radio-loud y radio quiet, RL/RQ) y la relación entre las propiedades en radio y las propiedades ópticas/UV. Las líneas de alta ionización, especialmente en fuentes con emisión débil en radio (RQ), suelen presentar una asimetría significativa hacia el azul, lo que constituye una fuerte evidencia de flujos de materia hacia fuera, outflows. En cambio, los cuásares con emisión intensa en radio (RL) exhiben componentes de outflow relativamente moderados. De manera que, los cuásares con las emisiones en radio más potentes muestran loa perfiles de las líneas más simétricos tanto en el rango UV como en el óptico. Nuestro análisis sugiere que la emisión en radio parece contribuir, de alguna manera, a outflows menores, y que los outflows más intensos, en ambas líneas de [O III]λ5007 y C IVλ1549, son debidos principalmente a la acreción. La Parte III de esta tesis explora cómo líneas anchas de emisión de ionización intermedia en el UV son apropiadas como estimadores del ensanchamiento virial de las líneas y, en consecuencia, para la estimación de la masa del agujero negro a altos (y bajos) corrimientos al rojo. Se derivan las correspondientes leyes de escala utilizando las líneas anchas del doblete de Al IIIλ1860 y de CIII]λ1909, dado que encontramos que la anchura de estas líneas del UV está altamente correlacionada con la de Hβ y, en consecuencia, pueden considerarse equivalentes para la mayoría de los cuásares de Población A (generalmente de alta acreción). Relaciones que se verifican con una muestra de cuásares cubriendo cinco órdenes de magnitud en luminosidad. Finalmente, en la Parte IV, hemos analizado una muestra pequeña de cuásares radio-loud y radio-quiet, y el análisis preliminar revela que los cuásares radio-loud presentan metalicidades sub-solares/solares, más bajas que en el caso de los objetos radio-quiet. Además, nuestros resultados sugieren que existe un gradiente de metalicidad entre la Pop. A y la Pop. B en la MS, lo que podría arrojar luz sobre sus trayectorias evolutivas., Este trabajo ha sido posible gracias a la financiación procedente de la beca INPhINIT de la fundación “la Caixa” (ID 100010434) y de los proyectos ID2019–106027GB–C41, PID2022-140871NBC21 by “ERDF A way of making Europe”, y el proyecto Severo Ochoa CEX2021- 515001131-S del IAA financiada por MCIN/AEI/10.13039/501100011033, del Gobierno de España., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001131-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis doctoral (DoctoralThesis)

Disentangling the formation path of lenticular galaxies

  • Tous, J. L.
Programa de doctorado en Física de la Universidad de Barcelona. Leída el 12 de abril del 2024., [eng] Astronomers have known of the existence of lenticular galaxies (S0) almost as long as they have known that there are other galaxies besides the Milky Way. While it is accepted that spiral galaxies emerge from the collapse of primordial vast clouds of gas and that when they merge they often give place to elliptical galaxies, the origin of S0 galaxies is still subject to debate. A clear bimodality in the properties of these galaxies, which are relatively abundant in low- and high-density environments, suggests that multiple formation mechanisms may be at play. In the field or in small groups, S0 galaxies can evolve from mergers. Conversely, hydrodynamic interactions are expected to transform spirals into S0s within large galaxy aggregations. This thesis is devoted to reviewing the main properties of galaxies classified as S0. Our goal is to gather abundant and robust information about relevant parameters of this poorly understood morphological type and their possible dependence on the environment to constrain their formation. For the first time, we explore the entire optical spectrum of these galaxies, seeking clues to infer their evolution. We start the exploration with single-fibre spectra from the SDSS of a sample of ∼70,000 nearby S0s and their global properties. A principal component analysis (PCA) is used to reduce the high complexity of the spectral data through its projections into a low-dimensional space, thereby facilitating a bias-free, machine-learning-based classification of the galaxies. The procedure reveals that the S0 population consists of two main classes with statistically inconsistent properties. While the bulk population is made by passive lenticulars with inactive spectra, the other is characterized by active galaxies that, despite their early-type morphology, show star formation rates that can be similar to those observed in late-type spirals. The main ionisation source of the active galaxies is star formation. However, in the Seyfert and LINER S0 systems detected in radio and X-ray, activity is driven, respectively, by nuclear accretion and post-AGB stars. Applied to spatially resolved spectra from MaNGA, the PCA can be used to study the radial configuration of activity in the galaxies. The extension of the PCA to these spectra leads us to identify star-forming rings in S0 galaxies typically associated with a positive activity gradient, and assemble the largest catalogue of these objects ever identified through this kind of data. Assessment of the rings indicates that they are relatively abundant (∼30%) in fully-formed S0s with a frequency that sharply increases with the mass of the hosts, but are uncorrelated with the environment. Rings are twice more frequent among the members of the passive class than in the active, and likely feed on residual gas from the disc. These results link the rings with the capture by the S0s of tiny dwarf satellites that closely orbit them. Finally, we examine the radial activity profiles of S0s as a function of their properties. The comparison reveals that the radial activity gradient of these galaxies is tightly related to their PCA and BPT classifications, and star formation status. The passive class often shows low-level, flat activity profiles, while their active counterparts generally have negative activity gradients, associated with high specific star formation rates. Altogether, our results support a scenario where minor mergers actively play a rejuvenation role in the recent evolution of S0 galaxies, while clusters operate in the opposite direction by quenching their activity. The framework we have developed provides a unified picture of activity in S0 galaxies in the optical domain. Combined with physical quantities and line diagnostics, the framework is a valuable tool for interpreting key trends in S0s that should be transferable to other morphologies., We acknowledge financial support from the Spanish Agencia Estatal de Investigaci´on and European FEDER funds through the research project AYA2016-76682-C3. JLT was also partially supported by a collaboration scholarship from the Royal Academy of Sciences and Arts of Barcelona and the University of Barcelona. Additional funding for this work has been provided by the State Agency for Research of the Spanish Ministerio de Ciencia, Innovaci´on y Universidades through the Centre of Excellence Severo Ochoa’s award for the Instituto de Astrof´ısica de Andaluc´ıa under contract SEV-2017-0709., We acknowledge financial support from the Spanish state agency MCIN/AEI/10.13039/501100011033 and by ’ERDF A way of making Europe’ funds through research grants PID2019–106027GB–C41 and PID2019–106027GB–C43. MCIN/AEI/10.13039/501100011033 has also provided additional support through the Centre of Excellence Severo Ochoa’s award for the Instituto de Astrofísica de Andalucía under contract SEV–2017–0709 and the Centre of Excellence María de Maeztu’s award for the Institut de Ciències del Cosmos at the Universitat de Barcelona under contract CEX2019–000918–M. J.L.T. acknowledges support by the PRE2020–091838 grant from MCIN/AEI/10.13039/501100011033 and by ’ESF Investing in your future’. H.D.S. acknowledges support by the PID2020-115098RJI00 grant from MCIN/AEI/10.13039/501100011033 and from the Spanish Ministry of Science and Innovation and the European Union - NextGenerationEU through the Recovery and Resilience Facility project ICTS-MRR-2021-03-CEFCA, With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (SEV-2017-0709)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis doctoral (DoctoralThesis)

Observing the Sun from start to finish: calibration, data reduction, and scientific exploitation of spectropolarimetric data for the Tunable Magnetograph

  • Santamarina, Pablo
Tesis del Departamento de Sistema Solar, Instituto de Astrofísica de Andalucía.. Programa de Doctorado en Física y Matemáticas (FisyMat), Universidad de Granada. Leída en el Salón de Actos del IAA el 16 de Mayo del 2025, a las 11:00 h., [EN] In this thesis, we present a complete overview of the process of acquiring and analyzing solar observations. Centered around the design and calibration of the TuMag instrument aboard the Sunrise III mission, we proceed through its operations and observations, detail the data-reduction process, address specific challenges related to Fabry-Pérot-based spectropolarimeters, and conclude with an example of data analysis focusing on solar magnetograms. The Sunrise III mission is the third flight of the Sunrise observatory, a one-meter solar telescope operating at an altitude of 37 km, hanging from a stratospheric balloon. For this flight, the observatory introduced a completely new set of post-focal instruments. These include two slit-based spectropolarimeters, the Sunrise Chromospheric Infrared spectroPolarimeter (SCIP) and the Sunrise Spectropolarimeter and Imager (SUSI), operating in the near-IR and UV, respectively, alongside the Tunable Magnetograph (TuMag), an imaging spectropolarimeter operating in the visible. Developed entirely by the Spanish Space Solar Physics Consortium (S3PC), TuMag is a spectropolarimeter based on a Fabry-Pérot interferometer capable of observing three spectral lines: Fe I 5250.2 Å, Fe I 5250.6 Å, and Mg I b2 5172.7 Å. Calibration tests confirmed the TuMag’s exceptional performance, with optical quality exceeding 𝜆/10, spectral resolution better than 9 pm, and polarimetric efficiencies close to ideal, enabling a signal-to-noise ratio (S/N) exceeding 1700 in Stokes I measurements. The Sunrise III flight occurred between the 10th and the 16th of July 2024, during which all subsystems operated nearly flawlessly. The main steps of the data-reduction pipeline were ready by the time of arrival of the data, allowing for a fast start of the reduction process. While ongoing due to the close timing of data arrival and thesis preparation, preliminary results showcase the exceptional quality of TuMag’s data. Although many steps in the reduction process are straightforward, certain corrections require more detailed attention. For instance, addressing instrumental artifacts in FPI-based spectropolarimeters is particularly challenging. By using a simulated sunspot observation with a telecentric FPI we demonstrate the importance of accurately correcting cavity map effects. We show that incomplete corrections can lead to velocity calculation of approximately 200 m/s and emphasize the role of flat-field correction in mitigating these effects. Additionally, we introduce an algorithm that models the etalon’s transmission profile to better correct cavity errors in flat-field observations, aiming to enhance corrections for telecentric FPI-based spectropolarimeters, such as TuMag or SO/PHI. Once the data have been thoroughly reduced, they become ready for scientific analysis. To illustrate this, we conclude with an application of persistent homology—a topological data analysis technique—on solar magnetograms. This approach demonstrates how magnetic features can be identified through their topological properties, potentially enabling the automatic detection of high-activity regions with elevated flaring probabilities., [ES] En esta tesis se presenta una revisión completa del proceso de adquisición y análisis de observaciones solares. Comenzando con el diseño y la calibración del instrumento TuMag, a bordo de la misión Sunrise III, se detalla su operación y observaciones, el proceso de reducción de datos, los desafíos específicos asociados a los espectropolarímetros basados en Fabry-Pérot y, finalmente, se concluye con un ejemplo de análisis de datos enfocado en magnetogramas solares. La misión Sunrise III constituye el tercer vuelo del observatorio Sunrise, un telescopio solar de un metro de abertura que opera a una altitud de 37 km, sustentado por un globo estratosférico. En este tercer vuelo, el observatorio incorporó un conjunto completamente nuevo de instrumentos posfocales, incluyendo dos espectropolarímetros basados en espectroscopía de rendija: el Sunrise Chromospheric Infrared spectro-Polarimeter (SCIP) y el Sunrise Spectropolarimeter and Imager (SUSI), que operan en el infrarrojo cercano y el ultravioleta, respectivamente, junto con el magnetógrafo sintonizable (el Tunable Magnetograph ; TuMag), un espectropolarímetro basado en un etalón Fabry-Pérot que observa en el visible. Desarrollado íntegramente por la Red Española de Física Solar Aerospacial (S3PC, siglas en inglés de Spanish Space Solar Physics Consortium), TuMag es un espectropolarímetro imaginador capaz de observar tres líneas espectrales: Fe I 5250.2 Å, Fe I 5250.6 Å y Mg I b2 5172.7 Å. Las pruebas de calibración confirmaron su excepcional desempeño, con una calidad óptica superior a 𝜆/10, una resolución espectral mejor que 9 pm y eficiencias polarimétricas cercanas al esquema ideal, lo que permite una relación señal a ruido superior a 1700 en mediciones del primer parámetro de Stokes, I. El vuelo de Sunrise III tuvo lugar entre los días 10 y 16 de julio de 2024, durante los cuales todos los subsistemas funcionaron casi a la perfección. Para el momento en que los datos fueron recibidos, los pasos principales del software de reducción estaban preparados, permitiendo comenzar el proceso de forma inmediata. Aunque este proceso continúa debido a la proximidad entre la recepción de los datos y la preparación de la tesis, los resultados preliminares demuestran la calidad excepcional de los datos obtenidos por TuMag. Algunos pasos del proceso de reducción son sencillos y de aplicación directa, sin embargo, algunos otros son de naturaleza más compleja y requieren de una atención más detallada. Un ejemplo de estos últimos es el de la corrección de los defectos instrumentales en interferómetros Fabry-Pérot. Mediante una observación simulada de una mancha solar con un etalón en configuración telecéntrica, demostramos la importancia de corregir adecuadamente los efectos del mapa de cavidades. Mostramos a su vez que las correcciones incompletas de los efectos causados por los defectos del etalón pueden generar errores en el cálculo de velocidades del orden de 200 m/s, y destacamos la relevancia de la corrección de campo plano para mitigar estos efectos. Adicionalmente, presentamos un algoritmo que modela el perfil de transmisión del etalón con el objetivo de mejorar la corrección de los efectos causados por los errores de cavidad en observaciones de campo plano, con el objetivo de optimizar las correcciones en espectropolarímetros basados en estos interferómetros, como pueden ser TuMag o SO/PHI. Una vez que los datos han sido completamente reducidos, están listos para su análisis científico. Para ilustrarlo, concluimos la tesis con una aplicación de homología persistente en magnetogramas solares, una técnica de análisis topológico de datos. Este enfoque demuestra cómo las características magnéticas se pueden identificar por sus características topológicas, lo que potencialmente habilita la detección automática de regiones de alta actividad con mayor probabilidad de erupciones solares., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001131-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis doctoral (DoctoralThesis)

Inferring black hole physics through image and video reconstructions with the Event Horizon Telescope

  • Dahale, Rohan
[EN] This thesis focuses on inferring black hole physics through the development and application of advanced image and video reconstruction techniques using data from the Event Horizon Telescope (EHT). The EHT, a global Very Long Baseline Interferometry (VLBI) array, achieves unprecedented angular resolution by operating at millimeter wavelengths (primarily 1.3 mm and 0.87 mm), enabling the horizonscale study of supermassive black holes (SMBHs) like M87* in the galaxy M87 and Sagittarius A* (Sgr A*) at the center of our Milky Way. The research presented herein aims to extract quantitative astrophysical information from EHT observations, test predictions of General Relativity (GR) in the strong-gravity regime, and provide insights into the complex plasma dynamics governing accretion near these extreme objects. A core component of this research involved imaging the April 2018 EHT observations of M87* utilizing the Bayesian interferometric modeling framework Comrade. These analyses confirmed the persistence of the iconic asymmetric ring-like emission structure, consistent with theoretical expectations of the shadow cast by a Kerr black hole of approximately 6.5 × 109 solar masses (M⊙ ). The measured ring diameter of ∼ 43.3+1.5 −3.1 μas was found to be remarkably consistent with the 2017 EHT results, showing the stability of this gravitational feature. Moreover, a significant counter-clockwise shift in the position angle of the ring’s brightness asymmetry by approximately 30◦ was observed between the 2017 and 2018 epochs. This evolution is attributed to the turbulent dynamics within the accretion flow, a phenomenon seen in General Relativistic Magnetohydrodynamics (GRMHD) simulations. The robust uncertainty quantification provided by the Bayesian approach was crucial in assessing these features and investigating the challenges in constraining parameters like the compact flux density of M87*. Further investigation into the M87* images focused on quantitatively characterizing and understanding the origin of the observed ring ellipticity. Leveraging the enhanced (u, v)-coverage of the EHT 2018 array, which included the Greenland Telescope (GLT) for improved North-South baseline sampling, a consistent ellipticity (τ = 0.08+0.03 −0.02) and major axis position angle (ξ = 50.1+6.2 −7.6 degrees East of North) were measured across five independent imaging and modeling methods. To interpret this measured ellipticity, an extensive comparison was performed against a large library of GRMHD simulations, spanning a wide range of physical parameters such as black hole spin, electron distribution functions (thermal and non-thermal), magnetic field configurations (Magnetically Arrested Disk – MAD, and Standard and Normal Evolution – SANE), and ion-to-electron temperature ratios. This analysis revealed no statistically significant correlation between the black hole spin and the observed image ellipticity. Instead, the ellipticity was found to correlate with the fraction of non-ring emission, particularly in non-thermal models and those exhibiting higher jet emission. These results compellingly suggest that the ellipticity measured in the current EHT images of M87* is predominantly governed by astrophysical effects within the turbulent accretion flow and jet base, rather than being a direct manifestation of the gravitational lensing of an intrinsically elliptical photon ring due to black hole spin. Isolating purely gravitational contributions to ellipticity will necessitate future observations with enhanced capabilities or different observational strategies. The next frontier in black hole physics is to obtain the first event-horizon-scale videos, particularly of rapidly variable sources like Sgr A*. Addressing the distinct challenges posed by imaging such dynamic SMBHs, this thesis introduces ehteval, a rigorous and systematic software framework developed for the validation and evaluation of horizon-scale video reconstructions. The development of ehteval is particularly relevant now as the EHT collaboration works towards producing these first videos, making robust validation tools essential. This framework utilizes realistic synthetic EHT datasets generated from a comprehensive library of ground truth models, including static geometric models, dynamic geometric models with diverse kinematic and polarimetric properties, and GRMHD simulations. A comprehensive suite of evaluation metrics was developed and validated to quantitatively assess reconstruction fidelity across multiple domains. These metrics probe the goodnessof- fit to interferometric data products (e.g., closure phases, log-closure amplitudes, complex fractional polarization), the morphological accuracy of total intensity and linear polarization structures in both static (time-averaged) and dynamic (timevariable) components, using normalized cross-correlations; and the ability to recover specific dynamical features such as hotspot parameters (size, position, flux) and rotational pattern speeds. The ehteval framework is foundational for interpreting the first EHT video reconstructions of Sgr A*, and ensuring the robustness of scientific conclusions drawn from these complex datasets. Collectively, this thesis bridges the gap between raw interferometric observables and interpretable physical quantities by combining rigorous image modeling with feature extraction and simulation comparison. These tools offer a principled foundation for interpreting horizon-scale observations of black holes and provide the groundwork for exploiting future expansions of the EHT, including Space VLBI missions capable of resolving fine structures such as photon subrings. By enabling reliable characterization of dynamic and polarized features in black hole environments, this work not only strengthens our ability to constrain accretion physics and spacetime geometry but also contributes to the development of next-generation techniques in computational astrophysics., [ES] Esta tesis se centra en inferir la física de los agujeros negros mediante el desarrollo y la aplicación de técnicas avanzadas de reconstrucción de imágenes y vídeos utilizando datos del Telescopio del Horizonte de Sucesos (EHT). El EHT, una red global de Interferometría de Muy Larga Base (VLBI), alcanza una resolución angular sin precedentes al operar en longitudes de onda milimétricas (principalmente 1.3 mm y 0.87 mm), lo que permite el estudio a escala del horizonte de sucesos de agujeros negros supermasivos (SMBH) como M87* en la galaxia M87 y Sagitario A* (Sgr A*) en el centro de nuestra Vía Láctea. La investigación aquí presentada tiene como objetivo extraer información astrofísica cuantitativa de las observaciones del EHT, probar las predicciones de la Relatividad General (RG) en el régimen de gravedad fuerte y proporcionar información sobre la compleja dinámica del plasma que gobierna la acreción cerca de estos objetos extremos. Un componente central de esta investigación implicó la obtención de imágenes de las observaciones de M87* del EHT de abril de 2018 utilizando el marco bayesiano de modelado interferométrico Comrade. Estos análisis confirmaron la persistencia de la icónica estructura de emisión en forma de anillo asimétrico, consistente con las expectativas teóricas de la sombra proyectada por un agujero negro de Kerr de aproximadamente 6.5×109 masas solares (M⊙). Se encontró que el diámetro medido del anillo de ∼ 43.3+1.5 −3.1 μas era notablemente consistente con los resultados del EHT de 2017, lo que subraya la estabilidad de esta característica gravitacional. Además, se observó un desplazamiento significativo en sentido antihorario en el ángulo de posición de la asimetría de brillo del anillo de aproximadamente 30◦ entre las épocas de 2017 y 2018. Esta evolución se atribuye a la dinámica turbulenta dentro del flujo de acreción, un fenómeno observado en las simulaciones Magnetohidrodinámica Relativista General (GRMHD).La cuantificación robusta de incertidumbre del enfoque bayesiano fue clave para evaluar estas características y explorar los retos al restringir parámetros como la densidad de flujo compacto de M87*. Una investigación adicional de las imágenes de M87* se centró en caracterizar cuantitativamente y comprender el origen de la elipticidad observada del anillo. Aprovechando la mejorada cobertura (u, v) de la red EHT 2018, que incluyó el Telescopio de Groenlandia (GLT) para un mejor muestreo de las líneas de base Norte-Sur, se midió una elipticidad consistente (τ = 0.08+0.03 −0.02) y un ángulo de posición del eje mayor (ξ = 50.1+6.2 −7.6 grados al Este del Norte) a través de cinco métodos independientes de obtención de imágenes y modelado. Para interpretar esta elipticidad medida, se realizó una comparación exhaustiva con una gran biblioteca de simulaciones GRMHD, que abarca una amplia gama de parámetros físicos como el espín del agujero negro, las funciones de distribución de electrones (térmicas y no térmicas), las configuraciones del campo magnético (Disco Magnéticamente Detenido – MAD, y Evolución Estándar y Normal – SANE), y las relaciones de temperatura ion-electrón. Este análisis no reveló ninguna correlación estadísticamente significativa entre el espín del agujero negro y la elipticidad observada de la imagen. En cambio, se encontró que la elipticidad se correlaciona con la fracción de emisión no anular, particularmente en modelos no térmicos y aquellos que exhiben una mayor emisión de jet. Estos resultados sugieren de manera convincente que la elipticidad medida en las imágenes actuales del EHT de M87* está predominantemente gobernada por efectos astrofísicos dentro del flujo de acreción turbulento y la base del jet, en lugar de ser una manifestación directa de la lente gravitacional de un anillo de fotones intrínsecamente elíptico debido al espín del agujero negro. Aislar las contribuciones puramente gravitacionales a la elipticidad requerirá futuras observaciones con capacidades mejoradas o diferentes estrategias de observación. La próxima frontera en la física de los agujeros negros es obtener los primeros vídeos a escala del horizonte de sucesos, particularmente de fuentes rápidamente variables como Sgr A*. Abordando los distintos desafíos que plantea la obtención de imágenes de tales SMBH dinámicos, esta tesis presenta ehteval, un marco de software riguroso y sistemático desarrollado para la validación y evaluación de reconstrucciones de vídeo a escala del horizonte. El desarrollo de ehteval es particularmente relevante ahora que la colaboración EHT trabaja para producir estos primeros vídeos, lo que hace esenciales herramientas de validación robustas. Este marco utiliza conjuntos de datos sintéticos realistas del EHT generados a partir de una biblioteca completa de modelos de "ground truth", incluidos modelos geométricos estáticos, modelos geométricos dinámicos con diversas propiedades cinemáticas y polarimétricas, y simulaciones GRMHD. Se desarrolló y validó un conjunto completo de métricas de evaluación para evaluar cuantitativamente la fidelidad de la reconstrucción en múltiples dominios. Estas métricas sondean la bondad del ajuste a los productos de datos interferométricos (p. ej., fases de cierre, log-amplitudes de cierre, polarización fraccional compleja), la precisión morfológica de las estructuras de intensidad total y polarización lineal en componentes tanto estáticos (promediados en el tiempo) como dinámicos (variables en el tiempo), utilizando correlaciones cruzadas normalizadas; y la capacidad de recuperar características dinámicas específicas como los parámetros de los puntos calientes (tamaño, posición, flujo) y las velocidades del patrón de rotación. El marco ehteval es fundamental para interpretar las primeras reconstrucciones de vídeo del EHT de Sgr A* y garantizar la solidez de las conclusiones científicas extraídas de estos complejos conjuntos de datos. Colectivamente, esta tesis cierra la brecha entre las observables interferométricas crudas y las cantidades físicas interpretables al combinar un modelado riguroso de imágenes con la extracción de características y la comparación de simulaciones. Estas herramientas ofrecen una base de principios para interpretar las observaciones a escala del horizonte de los agujeros negros y sientan las bases para explotar futuras expansiones del EHT, incluidas las misiones espaciales VLBI capaces de resolver estructuras finas como los subanillos de fotones. Al permitir una caracterización fiable de las características dinámicas y polarizadas en los entornos de los agujeros negros, este trabajo no solo fortalece nuestra capacidad para restringir la física de la acreción y la geometría del espaciotiempo, sino que también contribuye al desarrollo de técnicas de próxima generación en astrofísica computacional., I am grateful for the support of the INPhINIT doctoral fellowship from "la Caixa" Foundation (ID 100010434, fellowship code LCF/BQ/DI22/11940030), which enabled this doctoral work at the Instituto de Astrofísica de Andalucía (IAA-CSIC). I am also thankful for the support from the Spanish Ministerio de Ciencia, Innovación y Universidades through grant PID2022-140888NB-C21 and the Severo Ochoa grant CEX2021-001131-S funded by MICIU/AEI/10.13039/501100011033., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001131-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis doctoral (DoctoralThesis)

Dynamics of black holes and jets: a deep learning method for VLBI imaging

  • Foschi, Marianna
Tesis del Departamento de Radioastronomía y Estructura Galáctica, Instituto de Astrofísica de Andalucía. Programa de doctorado en Física y Ciencias Espaciales, Universidad de Granada. Leída en el Salón de Actos del IAA el 10 de septiembre del 2025, a las 16:00 h, [EN] This thesis focuses on the development of imaging and analysis techniques to study the dynamics of black hole accretion and jet launching. At the center of active galactic nuclei, supermassive black holes are surrounded by disks of accreting material and eject collimated, highly relativistic jets of plasma that extend far beyond the host galaxy. Despite extensive observational and theoretical e!orts, several fundamental questions about these systems remain unresolved. At horizon scales, uncertainties persist regarding the dominant accretion regime in observed sources, the physical mechanisms responsible for jet launching, the origin of flaring events and variability, and the measurement of specific black hole properties such as the spin. At the larger scales of relativistic jets, we still need to understand the complex details of the plasma fluid propagation through the jet, and its interactions with the interstellar medium. From an experimental point of view, the answer to these questions can be researched through observations of the radio emission originating from active galactic nuclei. Because of the astronomical distances at which these objects are located, only very long baseline interferometry (VLBI) provides the angular resolution necessary to image the lensed emission around black holes and distinguish the details of jet formation and propagation. Numerous imaging methods have been developed in recent years to achieve robust images at super-resolution, but accretion and jet propagation are intrinsically dynamic processes, whose properties cannot be fully captured by static imaging only. Until recently, there has been a lack of dedicated e!ective imaging and analysis techniques capable of robustly resolving and measuring the temporal variability of these sources at horizon or intra-jet scales. In this thesis we set out to tackle variability studies of relativistic jets and accreting black holes in three steps of increasing complexity, which coincide with the three main chapters of the thesis. The first work that we present consists in the application of a novel Regularized Maximum Likelihood (RML) imaging method to a decade of multi-epoch observations of a parsec scale jet. The super-resolution achieved by the imaging method allowed the measurement of the instantaneous jet expansion speed and the irregular precession of its core. However the discontinuities from one image to the next prevented further analysis of the jet dynamics. The second work consists in the development of a dynamic imaging pipeline capable of reconstructing time-continuous videos from multiple repeated observations of a slowly varying source or from a single observation of a source with intra-day variability. The method, named kine, was applied to almost three decades of observations of the 3C 345 relativistic jet, producing a smooth video, from which it was possible to compute an instantaneous pixel-by-pixel map of the plasma velocity in the jet. While the kine method proved useful for dynamic imaging of multi-epoch observations, it was originally developed to recover a video of the Sgr A* black hole at the galactic center, which presents significant time variability over the course of a single observation. Therefore, the third work presented in this thesis focuses on the validation of the kine imaging pipeline on realistic synthetic data, servations of Sgr A* with the Event Horizon Telescope (EHT). A successful validation of the method means that the imaging algorithm can be reliably applied by the EHT Collaboration to obtain the first horizon-scale video of a black hole. In the following paragraphs we provide a more detailed introduction to each work. In Chapter 3, we employ the forward imaging algorithm eht-imaging to image 12 years of roughly monthly observation of the 3C 84 relativistic jet at 43 GHz. Observations were conducted with the Very Long Baseline Array (VLBA) by the BEAM-ME monitoring program between 2010 and 2023, for a total of 121 images. Thanks to the super-resolving power of the imaging algorithm, which reaches an e!ective resolution a factor of 2-3 better compared to CLEAN, we were able to distinguish fine structures of the jet morphology, such as the limb brightening, the twisting of the core, multiple traveling hot spots, and the propagating edge of the jet. We measured the instantaneous expansion speed of the jet over time, identifying three di!erent expansion regimes, marked by a Fanaro!-Riley I (FR I) to FR II morphological transition, a hot spot frustration phase, and an opposite FR II to FR I transition. For every epoch, we fitted the shape of the two jet limbs, from which we recovered the winding jet axis and the projected jet launching direction. Tracking the latter over time we found an irregular variation of the jet core orientation. Overall the results of the work confirms previous studies of the morphological transition undergone by 3C 84 adding details regarding the transition and the hot spot frustration. More importantly, the analysis provided quantitative instantaneous measurements of the jet’s expansion speed and irregular precession over a decade-long timescale. In Chapter 4, we present kine, a newly developed video reconstruction algorithm for VLBI observations. The method is based on a neural representation, which is able to process simultaneously all observations available, while learning and leveraging the spatio-temporal correlations existent in the data in full polarization. We applied kine to 27 years of 15 GHz VLBA observations of the 3C 345 blazar from the MOJAVE program, obtaining a full polarization video with resolution and dynamic range significantly greater than what is achievable with frame-by-frames imaging using RML methods or other super-resolving methods. The total intensity video shows a highly variable jet that exhibits non-periodic changes in its launching direction. The polarization field structure indicates the presence of an evolving helical magnetic field threading the jet. The continuity and resolution of the video enabled the recovery of the variable projected velocity field of the jet plasma, using an optical flow method, in contrast to previous kinematic studies which could only measure the pattern speed of broad components through Gaussian model fitting. We find that the speed of the bright components traveling through the jet is of the same order of the average plasma speed, which indicates that the local brightness increases are not moving shocks, as previously proposed, but more likely regions with increased emissivity in a turbulent flow. In Chapter 5, we present an extended version of the kine imaging method, developed to address the specific challenges posed by EHT observations of the supermassive black hole Sgr A*. The imaging pipeline is validated on an extensive suite of synthetic data generated after EHT observations of Sgr A* on 2017 April 11, with the aim of assessing kine’s ability to reconstruct the ground-truth dynamics of the models with the extremely sparse coverage of EHT observations. The synthetic data were generated from static and dynamic geometric models, as well as more complex and realistic general-relativistic magneto-hydrodynamic black hole simulations. Realistic noise was introduced in the data, including thermal noise, gain corruption and interstellar scattering. kine passes all the validation tests successfully, proving its ability to correctly reconstruct di!erent morphologies in both total intensity and polarization, and recover a wide range of possible motion and variability. The reconstructions also recover important physical quantities, such as the speed of orbiting features, the brightness position angle of the ring shadow, and the linear polarization orientation. This extensive validation of the imaging method is part of a larger e!ort by the EHT Collaboration to recover a video of the lensed emission surrounding Sgr A*. Given the successful validation, kine is the main pipeline that is being used to reconstruct the first video of a supermassive black hole., [ES] Esta tesis se centra en el desarrollo de t´ecnicas de imagen y an´alisis para estudiar la din´amica de la acreci´on de agujeros negros y el lanzamiento de chorros relativistas. En el centro de los n´ucleos activos de galaxia, los agujeros negros supermasivos est´an rodeados por discos de material en acreci´on y eyectan chorros de plasma colimados y altamente relativistas que se extienden mucho m´as all´a de la galaxia que los origina. A pesar de los grandes esfuerzos te´oricos y observacionales, a´un quedan por resolver varias cuestiones fundamentales sobre estos sistemas. En la escala del horizonte de sucesos, persisten incertidumbres sobre el r´egimen de acreci´on dominante en las fuentes observadas, los mecanismos f´ısicos responsables del lanzamiento de chorros, el origen de los fen´omenos de flare y la variabilidad, y la medici´on de propiedades espec´ıficas de los agujeros negros como el esp´ın. En la escala de los chorros relativistas, a´un necesitamos comprender los detalles de la propagaci´on del plasma a trav´es del chorro y sus interacciones con el medio interestelar. Desde un punto de vista experimental, la respuesta a estas preguntas puede investigarse mediante observaciones de la emisi´on de radio procedente de n´ucleos activos de galaxia. Debido a las distancias astron´omicas a las que se encuentran estos objetos, s´olo la interferometr´ıa de muy larga l´ınea de base (VLBI) proporciona la resoluci´on angular necesaria para obtener im´agenes de la emisi´on curvada alrededor de los agujeros negros y distinguir los detalles de la formaci´on y propagaci´on de los chorros. En los ´ultimos a˜nos se han desarrollado numerosos m´etodos de obtenci´on de im´agenes para conseguir im´agenes robustas con superresoluci´on. Sin embargo la acreci´on y la propagaci´on de chorros son procesos intr´ınsecamente din´amicos, cuyas propiedades no pueden captarse por completo s´olo con im´agenes est´aticas. Hasta hace poco, se carec´ıa de t´ecnicas eficaces de imagen y an´alisis capaces de resolver y medir con solidez la variabilidad temporal de estas fuentes a escalas del horizonte o intrachorro. En esta tesis nos proponemos abordar el estudio de variabilidad de los chorros relativistas y los agujeros negros en acreci´on en tres pasos de complejidad creciente, que coinciden con los tres cap´ıtulos principales de la tesis. En el primer trabajo que presentamos, aplicamos un novedoso m´etodo de imagen basado en probabilidad m´axima regularizada (RML, por su siglas en ingl´es) para obtener im´agenes de un chorro a escala de un parsec, a partir de datos tomados a lo largo de una d´ecada. La superresoluci´on alcanzada por el m´etodo de imagen permiti´o medir la velocidad de expansi´on instant´anea del chorro y la precesi´on irregular de su n´ucleo. Sin embargo, las discontinuidades entre una imagen y la siguiente impidieron un an´alisis m´as profundo de la din´amica del chorro. El segundo trabajo consiste en el desarrollo de un algoritmo capaz de reconstruir v´ıdeos continuos en el tiempo a partir de m´ultiples observaciones de una fuente que var´ıa lentamente o a partir de una ´unica observaci´on de una fuente con variabilidad m´as rapida que el tiempo de observaci´on. El m´etodo, denominado kine, se aplic´o a casi tres d´ecadas de observaciones del chorro relativista 3C 345, produciendo un v´ıdeo continuo, a partir del cual fue posible calcular un mapa instant´aneo p´ıxel a p´ıxel de la velocidad del plasma en el chorro. Aunque el m´etodo kine result´o ´util para la obtenci´on de im´agenes din´amicas de observaciones multi-epoca, se desarroll´o originalmente para reconstruir un v´ıdeo del agujero negro Sgr A* en el centro gal´actico, que presenta una variabilidad temporal significativa en el transcurso de una ´unica observaci´on. Finalmente, el tercer trabajo presentado en esta tesis se centra en la validaci´on del algoritmo kine con datos sint´eticos realistas, simulados con el ruido y la cobertura extremadamente escaso de las observaciones a escalas del horizonte de sucesos de Sgr A* con el Event Horizon Telescope (EHT). La validaci´on con ´exito del m´etodo significa que el algoritmo puede ser aplicado con fiabilidad por la Colaboraci´on EHT para obtener el primer v´ıdeo a escalas del horizonte de sucesos de un agujero negro. En los p´arrafos siguientes ofrecemos una introducci´on m´as detallada de cada trabajo. En el Cap´ıtulo 3, empleamos el algoritmo eht-imaging para obtener im´agenes de 12 a˜nos de observaci´on aproximadamente mensual del chorro relativista 3C 84 a 43 GHz. Las observaciones se llevaron a cabo con el Very Long Baseline Array (VLBA) por el programa de monitorizado BEAM-ME entre 2010 y 2023, resultando en un total de 121 im´agenes. Gracias al poder de superresoluci´on del algoritmo, que alcanza una resoluci´on efectiva un factor de 2-3 mejor en comparaci´on con CLEAN, pudimos distinguir estructuras con m´as detalle de la morfolog´ıa del chorro, como el brillo del borde, la torsi´on del n´ucleo, m´ultiples puntos brillantes itinerantes y el borde de propagaci´on del chorro. Medimos la velocidad de expansi´on instant´anea del chorro a lo largo del tiempo, identificando tres reg´ımenes de expansi´on diferentes, marcados por una transici´on morfol´ogica de Fanaro!-Riley I (FR I) a FR II, una fase de frustraci´on del punto caliente, y una transici´on opuesta de FR II a FR I. Para cada ´epoca, ajustamos la forma de las dos extremidades del chorro, a partir de las cuales recuperamos el eje sinuoso del chorro y la direcci´on de lanzamiento del chorro proyectada sobre el plano del cielo. Al realizar un seguimiento de esta ´ultima a lo largo del tiempo, observamos una variaci´on irregular de la orientaci´on del n´ucleo del chorro. En conjunto, los resultados del trabajo confirman estudios anteriores sobre la transici´on morfol´ogica experimentada por 3C 84 , a˜nadiendo detalles sobre la transici´on y la frustraci´on del punto brillante. Adem´as queremos destacar que este an´alisis proporcion´o medidas cuantitativas instant´aneas de la velocidad de expansi´on del chorro y de su precesi´on irregular a lo largo de una d´ecada. En el Cap´ıtulo 4, presentamos kine, un algoritmo de reconstrucci´on de v´ıdeo que hemos desarrollado para observaciones VLBI. El m´etodo se basa en una representaci´on neuronal, que es capaz de procesar simult´aneamente todas las observaciones disponibles, a la vez que aprende y aprovecha las correlaciones espacio-temporales existentes en los datos en polarizaci´on completa. Hemos aplicado kine a 27 a˜nos de observaciones con el VLBA a 15 GHz del blazar 3C 345 dentro del programa MOJAVE, obteniendo un v´ıdeo en polarizaci´on completa con una resoluci´on y un rango din´amico significativamente superiores a los que se pueden conseguir con im´agenes individuales obtenidas con m´etodos RML u otros m´etodos capaces de superresoluci´on. El v´ıdeo en intensidad total muestra un chorro altamente variable que exhibe cambios no peri´odicos en su direcci´on de lanzamiento. La estructura del campo de polarizaci´on indica la presencia de un campo magn´etico helicoidal en evoluci´on que enhebra el chorro. La continuidad y resoluci´on del v´ıdeo han permitido recuperar el campo de velocidad inst´antanea del plasma del chorro, inst´antenea, proyectada sobre el plano del cielo, utilizando un m´etodo de flujo ´optico. Esto se contrapone a estudios cinem´aticos previos que s´olo pod´ıan medir la velocidad del patr´on de ciertas componentes mediante el ajuste de modelos Gaussianos. Encontramos que la velocidad de las componentes brillantes que viajan a trav´es del chorro es del mismo orden que la velocidad media del plasma, lo que indica que los aumentos locales de brillo no son choques en movimiento, como se hab´ıa propuesto anteriormente, sino m´as bien regiones con mayor emisividad en un flujo turbulento. En el Cap´ıtulo 5, presentamos una versi´on ampliada del algoritmo de reconstrucci´on de v´ıdeo kine, desarrollado para abordar los retos espec´ıficos planteados por las observaciones del EHT del agujero negro supermasivo Sgr A*. La pipeline se valida en un amplio conjunto de datos sint´eticos generados siguiendo las observaciones del EHT de Sgr A* el 11 de abril de 2017, con el objetivo de evaluar la capacidad de kine para reconstruir la din´amica real de los modelos con el cubrimiento extremadamente escaso de las observaciones del EHT. Los datos sint´eticos se generaron a partir de modelos geom´etricos est´aticos y din´amicos, as´ı como de simulaciones magnetohidrodin´amicas en relatividad general de agujeros negros m´as complejas y realistas. Se introdujeron condiciones de ruido realistas en los datos, incluyendo ruido t´ermico, ganancias en amplitud y en fase y scatteringinterestelar. kine supera con ´exito todas las pruebas de validaci´on, demostrando su capacidad de reconstruir correctamente diferentes morfolog´ıas tanto en intensidad total como en polarizaci´on, y recuperar una amplia gama de posibles din´amicas y variabilidad. Las reconstrucciones tambi´en recuperan importantes cantitades f´ısicas, como la velocidad de los ondas espirales y plasmoides, el ´angulo de posici´on del plasma que rodea el horizonte de sucesos y la orientaci´on de la polarizaci´on lineal. Esta extensa validaci´on del algoritmo forma parte de un esfuerzo mayor de la Colaboraci´on EHT para reconstruir un v´ıdeo de la emisi´on que rodea a Sgr A*. Dado el ´exito de la validaci´on, kine es el algoritmo principal que se est´a utilizando para reconstruir el primer v´ıdeo de un agujero negro supermasivo., The project that gave rise to these results received the support of a fellowship from “la Caixa” Foundation (ID 100010434). The fellowship code is LCF/BQ/DI2 2/11940027. The author of this thesis also acknowledges financial support from the Spanish Ministerio de Econom´ıa y Competitividad (grant numberPID2022-140888NBC21) and the Severo Ochoa grant CEX2021-001131-S funded byMCIN/AEI/10.13039/ 501100011033., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001131-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis doctoral (DoctoralThesis)

Interpretation of the infrared emission lines from starburst galaxies and active galactic nuclei based on photoionization models

  • Pérez-Díaz, B.
Tesis del Departamento de Astronomía Extragaláctica, Instituto de Astrofísica de Andalucía. Universidad de Granada. Programa de doctorado en Física y Matemáticas (FisyMat). Leída en el Salón de Actos del IAA el 17 de julio del 2025, a las 11:00 h ., [EN] The evolution of galaxies is a wide field in astrophysics that can be studied through several approaches, being one of them the analysis of the chemical content of the interstellar medium (ISM). Big Bang Nucleosynthesis predicts a well constrained composition for the ISM, and any deviation from these initial conditions must be attributed to the different star formation processes that govern galaxy evolution and which are eventually shaped by hydrodynamical processes (inflows, outflows, ...) within galaxies. The ionized gas offers a unique opportunity to analyze the chemical composition of the gas surrounding the most energetic events within galaxies such as star formation, Active Galactic Nuclei (AGN) or shocks, allowing us to understand the present-day composition of the gas that fuels and witnesses these events. Specifically, emission lines from the gas-phase ISM are key to constrain their physical and chemical properties, being collisionally excited lines (CELs) the best resource due to the their brightness in comparison to recombination lines (RLs). Studies analyzing chemical properties, essentially traced by the oxygen content, of the ionized gas have been historically performed on galaxies whose activity is dominated by star formation (star-forming galaxies, SFGs) and by means of optical spectroscopic observations, which are easily retrieved from ground-based observatories for low-redshift galaxies. In the recent decades, these studies have been complemented with the analysis of AGNs, also relying on optical observations. High-redshift galaxies have been targeted as well, although in this case optical observatories (enhanced by space-based missions allowing deeper surveys) retrieved rest-frame ultraviolet (UV) spectra, using a similar approach to that developed for optical observations. With the advent of JWST and its potential for galaxies up to redshift (𝑧 ∼ 10), we are now able to analyze chemical enrichment in the early Universe. Optical and UV studies present several disadvantages. Both of them, specially the UV, are extremely affected by dust extinction and attenuation, and dusty regions might remain unobserved by optical and UV tracers. Optical and UV CELs are strongly dependent on the physical properties of the ISM, being the electron temperature a very important factor in their emissivity, and establishing a temperature threshold below which these emissions lines are too faint to be observed. Overall, optical [3000Å − 9600Å] and UV [900Å − 3000Å] studies are biased towards regions that match the proper conditions for a proper analysis. This incomplete picture of the chemical enrichment must be complemented with infrared (IR) observations [9600Å − 700𝜇m]. IR emission lines are almost insensitive to interstellar dust, given us a unique window for the analysis of dusty regions in galaxies. Due to the involved atomic transitions, temperature effects are mostly mitigated, allowing us to observe cold regions, and avoiding the problem of having a proper constrained for the temperature and density conditions within the ionized gas. The great variety of emission lines observable in the IR regime not only allows us to perform chemical diagnostics of the ISM; but also robust constraints on the dominant ionizing sources. This thesis presents a detailed analysis on the use of IR emission lines to perform chemical evolution studies based on the composition of the gas-phase ISM. By means of the large amounts of archival data from past IR missions, we show the potential of IR emission line studies for ongoing (JWST, ALMA) and future (METIS) missions. We present our technique that we have developed based on photoionization models (HII-CHI-Mistry-IR), which follows a robust methodology whose validity has already been probed in other spectral regimes (optical and UV), and that can be applied for both SFGs and AGNs. We have structured the thesis as a transition from the optical to the infrared regime. In the first chapters, we show the limitations of optical studies to assess the proper ionizing nature of the gas-phase ISM, using integral field spectroscopic data to analyze a sample of low-luminosity AGNs, whose ionizing nature is still puzzling. Our analysis of the nuclear regions reveals that even with the limitations of optical studies, an analysis of the chemical enrichment history of these galaxies can be performed if a robust methodology that analyzes the chemical composition as traced by a primary (oxygen) and secondary (nitrogen) elements is used. Moreover, the analysis of the chemical abundance radial gradients reinforces this conclusion. In the remaining chapters, we show the use of our methodology for IR emission lines, showing that IR regime allows for a robust estimation not only of oxygen and nitrogen, but also of sulfur which is supposed to be less affected by dust depletion and, its relative abundance to oxygen is useful to assess the impact of dust depletion and whether nucleosynthesis of sulfur and oxygen follows the expected trend (i.e. a constant ratio). We also apply our methodology to a sample of (Ultra)-Luminous Infrared Galaxies [(U)LIRGs] which are characterized by large amounts of dust that shield their star formation processes. We obtain that, contrary to what it is inferred from optical studies, the majority of them do not deviate from the standard relations reported in the local Universe for SFGs and that the nitrogen content is essential to determine the chemical enrichment history in galaxies that suffer from strong hydrodynamical processes (as it is the case for the deep-diving phase). Overall, these results highlight the importance of IR studies in the future years to complement our picture of chemical evolution in galaxies, understanding the possible differences among them depending on their dominant ionizing activity., [ES] La evolución de las galaxias es una amplia rama de la astrofísica que puede ser estudiada de varias maneras, siendo una de ellas el análisis de la composición química del medio interestelar. La nucleosíntesis del Big Bang predice una clara composición para el medio interestelar, y cualquier desviación de estas condiciones iniciales debe ser adscrita a los diferentes procesos de formación estelar que rigen la evolución de galaxias, y que son ocasionalmente alterados por procesos hidrodinámicos (entrada y/o salida de gas, ...) en las galaxias. El gas ionizado ofrece una gran oportunidad para analizar el contenido químico del gas que rodea los eventos más energéticos de las galaxias, como formación estelar, Núcleos Activos o choques, permitiéndonos comprender la composición del gas en el momento actual, que sirve como combustible y testigo de dichos eventos. En concreto, las líneas de emisión que emite la fase gaseosa del medio interestelar son claves para restringir las propiedades físicas y químicas, siendo las líneas excitadas colisionalmente el mejor recurso debido a su brillo en comparación con las de recombinación. Estudios analizando las propiedades químicas, principalmente por medio del contenido de oxígeno, del gas ionizado se han llevado a cabo, históricamente, en galaxias cuya actividad está dominada por formación estelar y por medio de observaciones espectroscópicas ópticas, que son realizadas de forma sencilla con observatorios en tierra para galaxias a bajo corrimiento al rojo. En las últimas décadas, estos estudios se han complementado con el análisis de galaxias que contienen Núcleos Activos, por medio también de observaciones ópticas. Galaxias con alto corrimiento al rojo han sido también estudiadas, aunque en estos casos los observatorios ópticos (con ayuda de misiones en el espacio que permiten observaciones más profundas) proporcionan el espectro en reposo del ultravioleta, usando ténicas similares a las desarrolladas para estudios ópticos. Con la llegada del JWST y su potencial para estudiar galaxias muy distantes, ahora podemos empezar a analizar el enriquicimiento químico en las primeras fases del Universo. Estudios en los rangos óptico y ultravioleta presentan varios inconvenientes. Ambos, pero especialmente el ultravioleta, están afectados por extinción y atenuación por polvo, y por ese motivo algunas regiones caracterizadas por grandes cantidades de polvo pueden no ser observadas en estos rangos. Las líneas excitadas colisionalmente en los rangos óptico y ultravioleta sufren una fuerte dependencia de las condiciones físicas del medio interestelar, siendo la temperatura de los electrones un factor tan importante en su emisividad que establece un límite por debajo del cual dichas líneas son tan débiles que apenas se observan. En resumen, los estudios basados en los rangos óptico [3000Å − 9600Å] y ultravioleta [900Å − 3000Å] están sesgados a regiones que reúnen las condiciones necesarias para su análisis. Esta imagen incompleta del enriquecimiento químico debe ser complementado con observaciones infrarrojas [9600Å − 700𝜇m]. Las líneas de emisión infrarrojas apenas se ven afectadas por el polvo interestelar, ofreciéndonos una oportunidad única para el análisis de las regiones con más polvo de las galaxias. Gracias a las transiciones atómicas involucradas, los efectos de la temperatura están esencialmente mitigados, permitiéndonos además observar regiones frías, y evitando el problema de tener una buena estimación de la temperatura y densidad de los electrones del gas ionizado. La gran variedad de líneas de emisión observables en el rango infrarrojo no solo nos permite realizar estudios de la composición química, también nos proporciona herramientas adicionales para determinar las fuentes de ionización dominantes. Esta tesis presenta un análisis detallado del uso de las líneas de emisión infrarrojas para realizar estudios de evolución química basados en la composición de la fase gaseosa del medio interestelar. Por medio de las bases de datos con información de misiones dedicadas al rango infrarrojo, mostramos el potencial de las líneas de emisión infrarrojas para misiones presentes (JWST, ALMA) y futuras (METIS). Presentamos la técnica que hemos desarrollado basada en modelos de fotoionización (HII-CHI-Mistry-IR), que sige una robusta metodología cuya válidez ya ha sido demostrada en otros rangos espectrales (óptico y ultravioleta), y que puede ser aplicada tanto a galaxias dominadas por formación estelar como por Núcleos Activos. Hemos estructurado la tesis como una transición desde el rango óptico hasta el infrarrojo. En los primeros capítulos mostramos las limitaciones de los estudios ópticos para determinar la correcta fuente de ionización de la fase gaseosa del medio interestelar por medio de estudios de unidad integral de campo espectroscópico en galaxias que contienen Núcleos Activos de baja luminosidad (cuya naturaleza es aún incierta). Nuestro análisis de las regiones centrales muestra que incluso con las limitaciones de los estudios ópticos, se pueden realizar análisis de la historia de enriquecimiento químico de las galaxias si se utiliza una metodología consistent que permite estudiar la composición química por medio de elementos primarios (oxígeno) y secundarios (nitrógeno). Además, el análisis de los gradientes radiales de abundancias químicas refuerza esta idea. En los siguientes capítulos, mostramos el uso de nuestro método para el estudio de líneas de emisión en el infrarrojo, demostrando que este rango espectral ofrece una robusta estimación no solo del contenido en oxígeno y nitrógeno, sino también de azufre que se supone está mucho menos afectado por depleción en polvo, y cuya abundancia relativa al oxígeno es útil para determinar el impacto de la depleción y si la nucleosíntesis de ambos elementos sigue la tendencia esperada (es decir, que es constante). También aplicamos nuestra metodología a una muestra de galaxias luminosas en el infrarrojo que están caracterizadas por grandes cantidades de polvo que enmascaran los procesos de formación estelar. Obtenemos que, a diferencia de lo que indicaban los estudios ópticos, la gran mayoría no se desvían de las relaciones obtenidas para galaxias en el Universo local, y que el contenido en nítrogeno es crucial para determinar el nivel de enriquecimiento químico en galaxias que sufren de fuertes procesos hidrodinámicos (como ocurre en la fase de zambullido químico). En resumen, estos resultados destacan la importancia de los estudios basados en el rango infrarrojo en los próximos años para complementar nuestra perspectiva de la evolución química de las galaxias, entendiendo las posibles diferencias que pueden surgir como consecuencia de las diferentes fuentes de ionización que dominan la actividad de las mismas., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001131-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis doctoral (DoctoralThesis)

Microplásticos en la dieta y factores que influyen en su toxicidad

  • Sánchez Pajarero, Alicia
Tesis doctoral presentada en la Universitat Politècnica de València con fecha de lectura el 30/09/2025., [ENG]Plastics that are released uncontrollably into the environment can fragment through biotic and abiotic processes, resulting in microplastics (MPs). These MPs reach both marine and terrestrial food chains and, consequently, the food and water we consume. In addition to the monomers that make up their base polymer, they contain additives incorporated during their manufacture to confer the desired properties. These additives, especially plasticizers and flame retardants, can be highly toxic. Several studies have shown that exposure to MPs can cause damage at various levels. However, many of these studies have used MPs designed for scientific research, lacking many of the additives found in everyday plastics, without prior aging processes, and sometimes at excessively high doses. The aim of this PhD thesis has been the evalaution of the intestinal toxicity of MPs derived from samples of everyday-use plastics and the potential role of their additives in their adverse effects. The initial studies were conducted using materials of different types (PET, HDPE, LDPE, PA, PS, PVC, PP). Additives were characterized using gas chromatography coupled with mass spectrometry (GC-MS) and spectroscopic techniques. Using these plastics, fragmented into MPs, the study identified pre-intestinal absorption stages and factors that could influence their final toxicity (aging, gastrointestinal digestion, cooking, presence of food). The MPs of PVC, which showed the highest number and concentration of additives, were then used to investigate the toxicity of a subchronic exposure on the intestinal environment. In vitro toxicity studies were carried out using a model of intestinal mucosa, which was exposed for 6 days to aged and non-aged MPs (0.1–0.05 mg/L, average size 4–6 μm) and to the soluble fractions resulting from their gastrointestinal digestion (bioaccessible fractions). In vivo studies involved dosing BALB/c mice via oral gavage for two months with aged and non-aged PVC MPs (0.02 mg/day). These studies analyzed various parameters to assess the possible onset of pro-oxidative and pro-inflammatory processes, changes in mucosal permeability and morphology, and in animals, modifications in the metabolism of the gut microbiota. The results reveal the presence of a large number of plasticizers especially in LDPE, PA, and PVC plastics, with phthalic acid derivatives standing out for their toxicity [PAEs: diethyl phthalate (DEP), diisobutyl phthalate (DiBP), dibutyl phthalate (DBP), di(2-ethylhexyl) phthalate (DEHP)] as well as bisphenol A (BPA). Cooking and gastrointestinal digestion of these MPs lead to the release of additives, particularly in the presence of lipids. The presence of a food matrix during digestion reduces the amount of additives available for subsequent absorption. Aging under UV light and natural conditions promotes the release of additives, especially in PVC samples (15-69%). In vitro toxicity data with PVC shows altered intestinal permeability and an increase in pro-oxidant response, caused by both the particles and the bioaccessible fractions. This indicates that MPs, as well as the additives released during gastrointestinal digestion, can exert toxic effects. These findings have been confirmed in vivo. Animals treated with MPs show intestinal tissue with increased reactive species (ROS/RNS) (20-43%) and lipid peroxides (28-31%), along with higher levels of pro-inflammatory cytokines (IL-1β: 229%, TNF-α: 68-182%). Additionally, exposure affects microbial metabolism, reducing levels of short chain fatty acids (acetic acid: 32-57%, propionic acid: 59-82%, butyric acid: 43-72%). The present thesis has demonstrated that MPs, in the form in which they reach our diet, can have adverse effects on the intestinal environment and has identified a series of stages and factors that can influence their final toxic effect, and which must therefore be considered in toxicity and toxicokinetic studies., [ES]Los plásticos que se vierten de forma descontrolada en el medio ambiente pueden fragmentarse por procesos bióticos y abióticos dando lugar a microplásticos (MPs). Estos MPs alcanzan las cadenas tróficas marina y terrestre, y por ende los alimentos y aguas que consumimos. Además de los monómeros que forman su polímero base, presentan aditivos incorporados durante su fabricación para conferirle las propiedades deseadas. Estos aditivos, especialmente los plastificantes y retardantes de llama, pueden tener un alto grado de toxicidad. Los estudios de toxicidad han mostrado que la exposición a MPs produce daños a distintos niveles. Estos estudios se han realizado con MPs diseñados para la investigación científica carentes de los aditivos que hay en plásticos de uso cotidiano, que además no han experimentado un proceso de envejecimiento y que, en ocasiones, se han utilizado a dosis muy elevadas. El objetivo de la presente tesis doctoral ha sido la evaluación de la toxicidad intestinal de MPs procedentes de muestras de plásticos de uso cotidiano y el posible papel de sus aditivos en los efectos adversos. Los estudios iniciales se han llevado a cabo con materiales de diferente naturaleza (PET, HDPE, LDPE, PA, PS, PVC, PP). Se han caracterizado los aditivos por cromatografía de gases acoplada a espectrometría de masas (GC-MS) y por técnicas espectroscópicas. Empleando estos plásticos, fragmentados en MPs, se han identificado etapas previas a la absorción intestinal y factores que pudieran afectar su toxicidad final (envejecimiento, digestión gastrointestinal, cocinado, presencia de alimentos). Los MPs de PVC se han empleado posteriormente para la evaluación de la toxicidad de una exposición subcrónica sobre el entorno intestinal. Los estudios de toxicidad in vitro se han realizado empleando un modelo de mucosa intestinal, el cual se ha expuesto durante 6 días a MPs envejecidos y no envejecidos (0.1-0.05 mg/L, tamaño medio 4-6 m) y a las fracciones solubles procedentes de su digestión gastrointestinal (bioaccesibles). Los estudios in vivo se han realizado dosificando por sonda gástrica a ratones BALB/c durante 2 meses con MPs de PVC envejecidos y no envejecidos (0.02 mg/día). En estos estudios se han analizado distintos parámetros con el objetivo de evaluar la posible instauración de un proceso prooxidante y proinflamatorio, cambios en la permeabilidad y la morfología de la mucosa y, en animales, modificaciones en el metabolismo de la microbiota intestinal. Los resultados evidencian la presencia de un gran número de plastificantes en los plásticos de LDPE, PA y PVC principalmente, destacando por su grado de toxicidad los derivados del ácido ftálico [PAEs: dietil ftalato, (DEP), diisobutil ftalato (DiBP), dibutil ftalato (DBP), di(2-etilhexil) ftalato (DEHP)] y el bisfenol A (BPA). El cocinado y la digestión gastrointestinal de estos MPs conlleva la liberación de aditivos, especialmente en presencia de grasa. La presencia de una matriz alimentaria durante el proceso de digestión reduce la cantidad de aditivos disponibles para su posterior absorción. El envejecimiento, tanto en cámara UV como en condiciones naturales, favorece la liberación de aditivos, especialmente en el PVC (15-69%). Los estudios de toxicidad in vitro realizados con PVC muestran una afección de la permeabilidad intestinal y un aumento de la respuesta prooxidante, tanto de las partículas como de las fracciones bioaccesibles, indicando que los MPs pero también los aditivos liberados durante la digestión gastrointestinal pueden ejercer un efecto tóxico. Estos datos se han confirmado in vivo. Los animales tratados con MPs presentan un tejido intestinal con un aumento de las especies reactivas (ROS/RNS) (20-43%) y de los peróxidos lipídicos (28-31%) y un mayor contenido de citoquinas proinflamatorias (IL-1β:229%, TNF-α: 68-182%). Además, la exposición afecta el metabolismo microbiano con reducciones de los ácidos grasos de cadena corta (ácido acético: 32-57%, propiónico: 59-82%: butírico: 43-72%). Esta tesis ha evidenciado que los MPs, tal y como llegan a nuestra dieta, pueden tener un efecto adverso sobre el entorno intestinal y ha identificado una serie de etapas y factores que pueden influir en el efecto tóxico final y que, por tanto, deben ser consideradas en los estudios de toxicidad y toxicocinética., Este trabajo ha sido financiado por la Consellería de Innovación, Universidades, Ciencia y Sociedad Digital, Generalitat Valenciana (Prometeo/2021/041). Se reconoce la concesión por parte del Gobierno español de la acreditación MCIN/AEI al IATA-CSIC como Centro de Excelencia Acreditado Severo Ochoa (CEX2021-001189-S/ MCIN/AEI / 10.13039/501100011033)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001189-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis doctoral (DoctoralThesis)

Probing star-planet magnetic interaction in M-dwarf star systems with radio observations

  • Peña-Moñino, Luis
Tesis del Departamento de Radioastronomía y Estructura Galáctica, Instituto de Astrofísica de Andalucía. Programa de doctorado en Física y Matemáticas, Universidad de Granada. Leída en el Salón de Actos del IAA el 29 de septiembre del 2025, a las 11:00 h, [EN] This thesis is aimed at studying the radio emission arising from magnetic star-planet interaction (SPI) in M dwarf stellar systems. SPI is expected to induce a distinctive type of stellar auroral emission via the Electron Cyclotron Maser (ECM) mechanism. Detecting these radio signals would establish radio observations as a new, independent method for exoplanet detection. Unlike existing techniques, this method would uniquely probe planetary magnetic fields, offering insights into the planet’s interior and potential habitability. Since this radio emission is powered by the ECM mechanism, its observing frequency is directly proportional to the local magnetic field. SPI happens independently of whether the planet is inside, or outside of the Alfv´en surface. However, if the planet is outside the Alfv´en surface, the transfer of energy and momentum from Star-Planet Interaction (SPI) cannot reach the stellar surface, so the auroral emission is produced only above the surface of the planet. The observing frequency of this radio emission is at most of a few MHz for an Earth-like planet, so the ionosphere cutoff prevents us from detecting those signals. For that reason, in this thesis we focus on the radio emission arising from sub-Alfv´enic interaction, which happens when the exoplanet lies within the Alfv´en surface, i.e. where the magnetic energy density exceeds the kinetic energy of the stellar wind. This phenomenon is analogous to the interaction between Jupiter and its moon Io, with the star and planet assuming the roles of Jupiter and Io, respectively. The key point is that this radio emission happens close to the surface of the star, since the Alfv´en wave carries energy and momentum via the stellar wind, back to the star. The resulting emission is time-variable, coherent, highly polarized, and modulated by the planet’s orbit, typically producing two peaks per orbital period. Given that M dwarfs typically have strong magnetic fields, sometimes reaching kiloGauss, the expected emission falls at a few hundreds MHz, or even at GHz, making M dwarfs the prime targets to search of SPI. In chapter 3 we present SIRIO, a Python code we developed to model sub-Alfv´enic SPI as a function of key system parameters, such as orbital separation, stellar mass-loss rate, and planetary magnetic field strength, for three different stellar wind magnetic field geometries: a pure dipole, an open Parker spiral, and a hybrid Potential Field Source Surface (PFSS). A key innovation of SIRIO is its inclusion of free-free absorption by the stellar wind. To estimate the Poynting flux powering the emission, the code implements two alternative, popular SPI models: the Alfv´en wing model and the magnetic reconnection model. Tentative SPI-related radio detections have been made on Proxima Centauri, YZ Ceti, and GJ 1151, while TRAPPIST-1 is also a notable target due to the larger number of close-in orbiting planets. We apply SIRIO to these systems to investigate the potential for SPI-induced radio emission. We conclude that TRAPPIST-1 b, Proxima b, YZ Cet b, and the unconfirmed GJ 1151 b are promising targets to search for radio emission arising from SPI. SIRIO runs extremely fast even in a small laptop, and we make available the whole code so that other users can motivate observing proposals based on its predictions, as well as to understand better different physical parameters of the ongoing star-planet magnetic interaction in systems of their interest. In chapters 4 and 5 we present the results of radio observations aimed at detecting emission arising from sub-Alfv´enic SPI in GJ 486 and Proxima Centauri, respectively. We observed GJ 486 using the upgraded Giant Metrewave Telescope (uGMRT) at 550- 750 MHz, covering nearly the entire orbital phase of GJ 486b. We did not detect GJ 486 in any of the epochs. The two most likely explanations are the following: (i) the SPI radio signal is too low to be detectable, implying a mass-loss rate of ( ˙M⋆≲ 0.3 ˙M⊙) for GJ 486 and a low efficiency of the conversion of Poynting flux into radio emission (β ≲ 0.001). Alternatively, (ii) the emission could have been beamed away from our line of sight, implying that the magnetic obliquity and stellar inclination of the system are very low. In chapter 5 we present the results of our Proxima Centauri observing campaigns, aimed at confirming the tentative detection of sub-Alfv´enic SPI reported by P´erez- Torres et al. (2021). We report 1.1–3.1 GHz observations with the , conducted over two campaigns in April 2021 and December 2022 to January 2023, directly following up the earlier ATCA observations reported in P´erez-Torres et al. (2021). In addition, we include 0.86–1.71 GHz observations with MeerKAT, taken during March and April 2021. Each of these campaigns spans more than one full orbital period of Proxima b, ensuring a comprehensive phase coverage. We detect an emission pattern broadly consistent with the orbital period of Proxima b, with flux maxima occurring near the planetary quadratures. We also report a long-duration radio burst lasting approximately three days, peaking near quadrature, as well as a shorter burst reaching flux densities up to 14 mJy. The strong circular polarization and intensity of these signals are consistent with expectations for electron cyclotron maser emission generated by sub-Alfv´enic SPI. Although we cannot definitively confirm periodic enhancements directly linked to the planet, these findings reinforce the case for Proxima Centauri as one of the most promising systems for detecting radio emission arising from SPI. Complementing these observational efforts, in chapter 6 we also present results magneto-hydrodynamic (magnetohydrodynamic (MHD)) simulations to study the interaction between the magnetosphere of Proxima b and the stellar wind, exploring both calm (sub- and super-Alfv´enic) and extreme space weather scenarios. The simulations account for a range of planetary magnetic field strengths and different inclination angles between the stellar wind and the planetary magnetic axis. Our results show that under calm conditions and an Earth-like magnetic field, Proxima b’s magnetosphere maintains a sufficient standoff distance to shield the surface from cosmic radiation for most planetary tilts. For calm space weather conditions, the radio emission caused by the dayside reconnection regions can reach up to 7×1019 erg s−1 in the super-Alfv´enic regime, nearly an order of magnitude higher than in the sub-Alfv´enic regime thank to the formation of the bow shock. Under extreme space weather conditions, the simulated radio emission increases by two orders of magnitude. Those results reinforce the case for observing giant planets at low radio frequencies, as they may be directly detectable in the radio domain from Earth., [ES] El prop´osito de esta tesis es estudiar la radio emisi´on resultante de la interacci´on estrella-planeta (SPI por sus siglas en ingl´es) en sistemas con enanas M. Se espera que este tipo de interacci´on produzca un tipo particular de emisi´on auroral en las estrellas mediante el mecanismo electr´on-ciclotr´on m´aser (ECM). A diferencia de las t´ecnicas ya existentes, este m´etodo ser´ıa capaz de ofrecer informaci´on sobre los campos magn´eticos planetarios, ya que permite estudiar el interior del planeta, as´ı como su posible habitabilidad. SPI ocurre independientemente de si el planeta se encuentra en el interior o en el exterior de la superficie de Alfv´en. Sin embargo, si el planeta se encuentra fuera de dicha superficie, la transferencia de energ´ıa y momento de SPI no puede alcanzar la superficie de la estrella, por lo que s´olo se produce emisi´on auroral sobre la superficie del planeta. La frecuencia de observaci´on de esta emisi´on es como m´aximo de unos pocos MHz para un planeta similar a la Tierra, por lo que la ionosfera de nuestro planeta impedir´ıa que detectemos esta emisi´on. Por esta raz´on, en esta tesis nos centramos en la emisi´on resultante de la interacci´on sub-Alfv´enica, que es la que ocurre en el interior de la superficie de Alfv´en, donde la densidad de energ´ıa magn´etica es superior a la densidad de energ´ıa cin´etica del viento estelar. Este fen´omeno es an´alogo a la interacci´on que tiene lugar entre J´upiter y su luna ´Io, donde la estrella y el exoplaneta desempe˜nan el papel de J´upiter e ´Io, respectivamente. La idea clave es que la emisi´on ocurre cerca de la estrella, puesto que la onda de Alfv´en lleva consigo energ´ıa y momento a trav´es del viento estelar de vuelta a la estrella. La emisi´on resultante var´ıa con el tiempo, es coherente, altamente polarizada y est´a modulada por la ´orbita del planeta, t´ıpicamente produciendo dos picos por cada periodo orbital. Como las enanas M tienen t´ıpicamente un campo magn´etico m´as intenso, la emisi´on esperada se halla en el rango de baja de frecuencia del espectro radio, lo cual las convierte en el mejor objetivo para la b´usqueda de SPI. En el cap´ıtulo 3 presentamos SIRIO, un c´odigo de Python que desarrollamos para modelar SPI en funci´on de varios par´ametros clave del sistema, como la separaci´on orbital, la tasa de p´erdida de masa de la estrella y la intensidad del campo magn´etico del planeta, para tres geometr´ıas diferentes del campo magn´etico del viento estelar: un dipolo puro, una espiral de Parker y una h´ıbrida con una Superficie Fuente de Campo Potencial (PFSS por sus siglas en ingl´es). Una novedad importante de SIRIO es que incluye la absorci´on libre-libre debida al viento estelar. Para estimar el flujo de Poynting asociado a la emisi´on, el c´odigo emplea dos modelos alternativos: el modelo de onda de Alfv´en y el modelo de reconexi´on magn´etica. Ha habido detecciones prometedoras de SPI en Proxima Centauri, YZ Ceti, y GJ 1151, mientras que TRAPPIST-1 es tambi´en un objeto notable debido a que tiene una gran cantidad de planetas orbitando cerca de la estrella. Usamos SIRIO para estudiar la posible emisi´on radio inducida por SPI. Llegamos a la conclusi´on de que TRAPPIST-1 b, Proxima b, YZ Cet b, y el no confirmado GJ 1151 b son objetos prometedores para buscar SPI. SIRIO funciona extremadamente r´apido incluso en un port´atil con pocos recursos. El c´odigo Python es libre para que otros usuarios puedan fundamentar propuestas de observaci´on basadas en las predicciones de SIRIO, as´ı como para entender mejor las condiciones f´ısicas de la interacci´on estrella-planeta en los sistemas estelares de su inter´es. En los cap´ıtulos 4 y 5 presentamos los resultados de observaciones de radio cuyo prop´osito era la detecci´on de emisi´on SPI en GJ 486 y Proxima Centauri, respectivamente. Hemos observado GJ 486 con uGMRT a 550-750 MHz, cubriendo casi la totalidad de la fase orbital de GJ 486b. No hemos detectado GJ 486 en ninguna de las ´epocas. Las dos explicaciones m´as probables son las siguientes: (i) la se˜nal SPI es demasiado d´ebil para poder detectarse, lo que implica que la tasa de p´erdida de masa de GJ 486 es de ˙M⋆≲ 0.3 ˙M⊙y que la eficiencia de la conversi´on de flujo de Poynting a emisi´on radio es baja (β ≲ 0.001). Alternativamente, la emisi´on podr´ıa haber estado dirigida fuera de nuestra l´ınea de visi´on, lo que sugiere que la oblicuidad magn´etica y la inclinaci´on estelar del sistema son muy bajas. En el cap´ıtulo 5 presentamos los resultados de nuestras campa˜nas de observaci´on de Proxima Centauri, destinadas a confirmar la detecci´on tentativa de SPI sub-Alfv´enica por P´erez-Torres et al. (2021). Presentamos nuestras observaciones realizadas con ATCA en el rango de 1.1 a 3.1 GHz, llevadas a cabo en dos campa˜nas durante abril de 2021 y entre diciembre de 2022 y enero de 2023, como continuaci´on directa de las observaciones previas con Australian Telescope Compact Array (ATCA) presentadas en P´erez-Torres et al. (2021). Adem´as, incluimos observaciones en el rango de 0.86 a 1.71 GHz con MeerKAT durante marzo y abril de 2021. Cada una de estas campa˜nas abarca m´as de un periodo orbital completo de Proxima b, lo que garantiza una cobertura de fase muy completa. Detectamos un patr´on de emisi´on que concuerda, en t´erminos generales, con el periodo orbital de Proxima b, con m´aximos de flujo que ocurren cerca de las cuadraturas. Tambi´en mostramos una r´afaga de radio de larga duraci´on que se prolong ´o durante aproximadamente tres d´ıas y alcanz´o su m´aximo cerca de la cuadratura, as´ı como una r´afaga m´as breve que alcanz´o densidades de flujo de hasta 14 mJy. El elevado grado de polarizaci´on circular y la intensidad de estas se˜nales son consistentes con lo esperado para una emisi´on de tipo ECM generada por SPI. Aunque no podemos confirmar de forma definitiva que la variabilidad de la se˜nal est´e directamente asociada al planeta, estos resultados refuerzan la idea de que Proxima Centauri es uno de los sistemas m´as prometedores para detectar emisi´on de radio originada por SPI. Como complemento a los esfuerzos observacionales, en el Cap´ıtulo 6 tambi´en presentamos resultados de simulaciones magnetohidrodin´amicas (MHD) para estudiar la interacci´on entre la magnetosfera de Proxima b y el viento estelar, explorando tanto escenarios con clima espacial tranquilo (en r´egimen sub- y super-Alfv´enico) como condiciones clim´aticas extremas. Las simulaciones consideran una variedad de intensidades del campo magn´etico planetario y distintos ´angulos de inclinaci´on entre el viento estelar y el eje magn´etico del planeta. Nuestros resultados muestran que, bajo condiciones tranquilas y con un campo magn´etico similar al terrestre, la magnetosfera de Proxima b mantiene una distancia de equilibrio suficiente para proteger la superficie de la radiaci´on c´osmica en la mayor´ıa de las inclinaciones consideradas. Bajo condiciones tranquilas de clima espacial, la emisi´on de radio causada por las regiones diurnas de reconexi´on puede alcanzar hasta 7 × 1019 erg s−1 en el r´egimen super-Alfv´enico, casi un orden de magnitud mayor por encima del r´egimen sub-Alfv´enico gracias a la formaci´on del frente de choque. En condiciones extremas de clima espacial, la emisi´on de radio aumenta en dos ´ordenes de magnitud. Este resultado sugiere que los planetas gigantes podr´ıan ser detectables directamente en el espectro de radio desde la Tierra., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001131-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis doctoral (DoctoralThesis)

Understanding supermassive black hole accretion and jet formation through extremely high angular resolution VLBI observations

  • Toscano, Teresa
Tesis del Departamento de Radioastronomía y Estructura Galáctica, Instituto de Astrofísica de Andalucía. Universidad de Granada. Programa de doctorado en Física y Ciencias Espaciales. Leída en el Salón de Actos del IAA el 9 de septiembre del 2025, a las 11:00 h ., [EN] This thesis investigates the structure, dynamics, and magnetic field properties of relativistic jets in active galactic nuclei (AGN) through high-resolution Very Long Baseline Interferometry (VLBI) observations and advanced imaging methods. To this end, it combines three complementary studies that collectively address the challenges of reconstructing and interpreting these objects from different perspectives. First, pushing the limits of current black hole imaging towards the recovery of the first movies of these objects, we contribute to the development of dynamic imaging methods for black holes by validating a regularized maximum likelihood (RML) framework. This algorithm, as part of a joint effort in one of the most ambitious projects within the Event Horizon Telescope Collaboration (EHTC), is focused on a multi-modality approach via a Multi-objective Particle Swarm Optimization (MO-PSO ) algorithm. This approach efficiently enables the explo- ration of the multimodal posterior distribution, and recovers dynamic, full Stokes ∗ reconstructions of variable sources, such as Sagittarius A* (Sgr A ), the supermas- sive black hole at the centre of our galaxy. We use simulated synthetic data that present the same properties as EHTC data from SgrA* in April 11 2017. These data are used to create different synthetic models varying in morphology and increasing dynamic complexity. This way, the ability to robustly reconstruct these models is carefully validated following different metrics. Moreover, we show that while many solutions can fit the sparse VLBI data, only a subset are physically plausible. Second, we present a multi-frequency polarization study of the quasar 3C 273, using Very Long Baseline Array (VLBA) observations at six different frequencies (5, 8, 15, 22, 43 and 86 GHz) to produce total intensity, linear polarization, and rotation measure (RM) maps. The results reveal a robust transverse RM gradient across the jet. This provides strong evidence for an ordered helical magnetic field structure, likely playing a key role in jet collimation. A comparison with earlier epochs shows temporal variations in the RM, suggesting a dynamic evolution in the jet sheath’s magnetized plasma environment. Second, we revisit the parsec-scale magnetic field structure of the quasar 3C 273 through a new polarization study using the VLBA at six frequencies (5, 8, 15, 22, 43, and 86 GHz). Our study produces detailed maps of total intensity, linear polarization, and RM. We confirm the presence of a robust transverse RM gradient across the jet, supporting the existence of a large-scale helical magnetic field, likely playing a key role in jet collimation. By comparing with earlier epochs, we detect temporal variations in both the RM magnitude and gradient structure, indicating dynamical evolution in the jet’s magnetized plasma environment. These findings provide new information on the evolution of the jet’s magnetic field structure. Lastly, we report space VLBI observations of the blazar 3C 279 at 22 GHz using the space radio telescope from the RadioAstron program, achieving an angular resolution of ∼ 26µas with ground-space baselines up to 8 Gλ. The reconstructed image in total flux density and polarization shows electric vector position angles mostly aligned with the jet axis, consistent with the presence of a predominantly toroidal magnetic field. The fine-scale jet structure is traced up to ∼ 180 parsec from the core, showing no signs of any filamentary structure previously observed in an earlier RadioAstron data study of the source, most likely due to the sparsity of the uv-coverage, and coinciding with a notable decrease in total jet intensity. The analysis of this follow-up work includes a synthetic data test and measuring the brightness temperature of the radio core, yielding an estimate of the intrinsic magnetic field strength of ∼ 0.2 G, consistent with the jet being in equipartition. Together, these studies provide new insights into the dynamics, magnetic field configurations, temporal and structure evolution, and imaging challenges of relativistic jets and supermassive black holes, contributing to the methodology and observational studies necessary to achieve a better understanding of these fascinating, yet still mysterious objects., [ES] Esta tesis estudia la estructura, din´amica y propiedades del campo magn´etico de los chorros relativistas en los n´ucleosactivosdegalaxias(AGN),utilizando observaciones de alta resoluci´on con interferometr´ıa de muy larga base (VLBI) y algoritmos de reconstrucci´on de imagen. Para ello, se combinan tres estudios complementarios que abordan, en conjunto, los desaf´ıos de reconstruir e interpretar estos objetos desde distintas perspectivas. En primer lugar, desafiando los l´ımites de la reconstrucci´on de im´agenes de agujeros negros hacia la obtenci´on de las primeras pel´ıculas de estos objetos, presento el desarrollo y validaci´on de un m´etodo de reconstrucci´on de im´agenes basado en algoritmos de m´aximaverosimilitudregularizada(RML).Estealgoritmo, integrado como parte de un esfuerzo conjunto dentro de uno de los proyectos m´as ambiciosos de la Colaboraci´on del Telescopio del Horizonte de Sucesos (EHTC), incorpora la exploraci´on de m´ultiplessolucionesposiblesmedianteunalgoritmo de optimizaci´onporenjambredepart´ıculasmultiobjetivo( MO-PSO ). Esta t´ecnica permite explorar de forma eficiente diferentes soluciones compatibles con los datos, lo que posibilita reconstrucciones din´amicasyenpolarizaci´ondefuentesvariables ∗ como Sagitario A* (Sgr A ), el agujero negro supermasivo en el centro de nuestra galaxia. Los datos utilizados fueron sint´eticos, recreando las mismas caracter´ısticas ∗ que los obtenidos por el EHTC de Sgr A el 11 de abril de 2017, y se usaron para simular distintos modelos con variaciones en su morfolog´ıa y complejidad din´amica. De este modo, se valida la capacidad del m´etodo para reconstruir estos modelos de forma robusta. Adem´as,comoresultadodelaexploraci´onmultimodal,seobtiene un amplio conjunto de posibles soluciones que se ajustan a los datos, demostrando tambi´en que no todas ellas son f´ısicamente plausibles. En segundo lugar, presento un estudio de polarizaci´onendistintasfrecuencias del cu´asar 3C 273, utilizando observaciones con el Very Long Baseline Array (VLBA) a seis frecuencias distintas (5, 8, 15, 22, 43 y 86 GHz) para obtener mapas de intensidad total, polarizaci´onlinealymedidaderotaci´on(RM).Losresultados muestran un claro gradiente transversal de RM a lo largo del chorro, lo que es indicador de la presencia de un campo magn´etico ordenado y helicoidal, que prob- ablemente contribuye a la colimaci´on del chorro. Al comparar con observaciones anteriores, se observan variaciones en la medida de rotaci´onalolargodeltiempo, lo que apunta a cambios din´amicosenelentornomagnetizadodelrecubrimiento del chorro. Por ´ultimo,peronoporellomenosimportante,presentoobservacioneses- paciales de VLBI del bl´azar 3C 279 a 22 GHz, realizadas con el radiotelescopio espacial del programa RadioAstron, alcanzando una resoluci´onangulardeaprox- imadamente 26 microsegundos de arco gracias a la presencia de l´ıneas de base tierra-espacio de hasta 8 Gλ. La imagen reconstruida en intensidad total y po- larizaci´on muestra ´angulos del vector el´ectrico (EVPA) alineados en su mayor´ıa con el eje del chorro, lo que concuerda con la presencia de un campo magn´etico predominantemente toroidal. La estructura del chorro se puede seguir hasta unos 180 parsecs desde el n´ucleo,sinindiciosdelaestructuracompuestaporfilamentos observada en un estudio previo con datos tambi´en de RadioAstron, y coincide con una disminuci´onnotableenlaintensidadtotaldelchorro.Elan´alisisincluye pruebas con datos sint´eticos y la medici´ondelatemperaturadebrillodeln´ucleo, lo que permite estimar una intensidad del campo magn´etico intr´ınseco de alrededor de 0.2 gauss, de acuerdo con un chorro en equilibrio energ´etico. En conjunto, estos estudios ofrecen nuevos conocimientos sobre la din´amica, configuraci´on del campo magn´etico, evoluci´on temporal y estructural, y los re- tos en la reconstrucci´on de im´agenes de chorros relativistas y agujeros negros supermasivos. Contribuyen as´ı a mejorar tanto la metodolog´ıa como los estudios observacionales necesarios para comprender mejor estos objetos tan fascinantes como enigm´aticos., Por supuesto, mi trabajo en el IAA-CSIC ha sido en parte financiado por el Ministerio de Economía y competitividad español(PID2019-108995GB-C21),así que gracias por la oportunidad., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001131-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis doctoral (DoctoralThesis)

Lightcones for large scale structure surveys. Exploring clustering and covariance errors

  • Ereza, J.
Tesis doctoral inédita del Departamento de Astronomía Extragaláctica, Instituto de Astrofísica de Andalucía, leída en la Universidad Autónoma de Madrid, Facultad de Ciencias, Departamento de Física Teórica. Programa de Doctorado en Física Teórica. Fecha de Lectura: 21-03-2025.-- Tutor: Sánchez Conde, Miguel Ángel, [EN] This thesis investigates the large-scale structure of the Universe by generating and analysing simulated galaxy catalogues – also known as lightcones – from the Uchuu and GLAM cosmological 𝑁-body simulations. These simulations are employed to replicate the clustering statistics observed in the BOSS, eBOSS, and DESI surveys, with a particular focus on luminous red galaxies. The primary goal of this work is to validate the effectiveness of these simulations in reproducing observed largescale clustering, thereby enhancing our understanding of cosmology and galaxy formation. The Uchuu simulation, with its high resolution and reliance on the Planck cosmology, is used to generate galaxy lightcones for the BOSS, eBOSS, and DESI-sv3 samples. The subhalo abundancing matching method is employed to assign luminous red galaxies to dark matter (sub)halos, enabling a detailed analysis of small and large-scale clustering signals, and a robust comparison with observed data. Additionally, GLAM simulations are used to create lightcones for covariance matrix estimation, crucial for accurately assessing statistical uncertainties in cosmological measurements. The results demonstrate that both the Uchuu and GLAM lightcones successfully reproduce observed clustering statistics, confirming their ability to accurately model the (small- and) large-scale distribution of matter and velocity fields. The accuracy of the covariance matrix estimations using GLAM further supports the reliability of our simulations, highlighting their superiority over lightcones based on approximate methods. In the context of cosmological model testing, GLAM simulations with and without massive neutrinos are evaluated, particularly in their ability to replicate the observed twopoint correlation function. The results suggest that current data does not provide definitive evidence for the presence of massive neutrinos, underscoring the need for further observational data beyond that analysed in this thesis. This thesis advances the field by generating robust simulated galaxy catalogues that facilitate the interpretation of observational data, thereby enhancing our understanding of the large-scale structure of the Universe and the galaxy-halo connection, while offering novel insights into the fundamental physical processes that govern cosmic evolution., [ES] En esta tesis se investiga la estructura a gran escala del Universo generando y analizando catálogos simulados de galaxias -también conocidos como lightcones- a partir de las simulaciones cosmológicas de𝑁 cuerpos de Uchuu y GLAM. Estas simulaciones se emplean para replicar las estadísticas de agrupamiento observadas en los catálogos de BOSS, eBOSS y DESI, con un enfoque particular en las galaxias rojas luminosas. El objetivo principal de este trabajo es validar la eficacia de estas simulaciones a la hora de reproducir la agrupación a gran escala observada, mejorando así nuestra comprensión de la cosmología y la formación de galaxias. La simulación Uchuu, con su elevada resolución y basada en la cosmología de Planck, se utiliza para generar lightcones de galaxias para las muestras BOSS, eBOSS y DESI-sv3. Se emplea el método de subhalo abundance matching para asignar galaxias rojas luminosas a los (sub)halos de materia oscura, lo que permite un análisis detallado de las señales de agrupamiento a pequeña y gran escala, y una comparación robusta con los datos observados. Además, las simulaciones GLAM se utilizan para crear lightcones para la estimación de matrices de covarianza, cruciales para evaluar con precisión las incertidumbres estadísticas en las mediciones cosmológicas. Los resultados demuestran que tanto los lightcones de Uchuu como los de GLAM reproducen con éxito las estadísticas de agrupamiento observadas, confirmando su capacidad para modelar con gran detalle la distribución a (pequeña y) gran escala de los campos de materia y velocidad. La precisión de las estimaciones de las matrices de covarianza obtenidas con GLAM refuerza aún más la fiabilidad de nuestras simulaciones, destacando su superioridad sobre los lightcones derivados de métodos aproximados. En el contexto de la comprobación de modelos cosmológicos, se evalúan simulaciones GLAM con y sin neutrinos masivos, particularmente en su capacidad para replicar la función de correlación de dos puntos observada. Los resultados sugieren que los datos actuales no proporcionan pruebas definitivas de la presencia de neutrinos masivos, subrayando la necesidad de disponer de más datos observacionales además de los analizados en esta tesis. Esta tesis contribuye al campo mediante la generación de catálogos simulados de galaxias robustos que facilitan la interpretación de los datos observacionales, mejorando así nuestra comprensión de la estructura a gran escala del Universo y la conexión galaxia-halo, al tiempo que ofrece nuevas perspectivas sobre los procesos físicos fundamentales que rigen la evolución cósmica., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001131-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis doctoral (DoctoralThesis)

Identification and characterization of nascent planetary nebulae

  • Cala, Roldán A.
Tesis del Departamento de Radioastronomía y Estructura Galáctica, Instituto de Astrofísica de Andalucía. Universidad de Granada. Programa de Doctorado en Física y Matemáticas (FisyMat). Leída el 7 de julio de 2026 en el salón de actos del IAA-CSIC a las 10:30 h., [EN] The morphology of stars with initial masses (Mi) ≃ 0.8−8M⊙ (e.g., including the Sun) is roughly spherical during most of their evolution, but during the planetary nebula (PN) phase it tends to show spectacular non-spherical shapes (e.g., butterfly or ring-like morphologies), whose origins are not fully understood. We aim to improve our understanding of the PN formation by identifying and characterizing new nascent PNe and candidates by means of maser and non-thermal radio continuum emission. To achieve this, we consulted maser databases and radio continuum surveys, gathered published and archival optical and infrared imaging and spectroscopy, and complemented these data with our own infrared, optical and radio observations. After our careful multiwavelength analysis, including an assessment of the ionized emission using newly developed diagnostic diagrams to distinguish between shocks and photoionization, we increased the number of maser-emitting PNe and candidates from 10 to 23, and of non-thermal PNe and candidates in the centimeter regime from 1 to 23. The significant increase in the number of confirmed and candidate PNe with maser and/or non-thermal radio continuum emission opens the possibility, for the first time, to carry out robust statistical investigations of the nascent PN phase. In addition, we identified 3 ‘water fountains’ (WFs) and one WF candidate, increasing the number of confirmed WFs from 15 to 18. Notably, we reported the discovery of the first known ‘low-velocity’ WFs with ionized emission, an emergent group of sources whose study could be relevant to determine the chronology of the onset of ionization in evolved stars. Although maser-emitting PNe and candidates seem to be a heterogeneous group, some of them show oxygen-rich circumstellar envelopes and carbon-rich central stars, an evolutionary channel consistent with a recent thermal pulse and/or common-envelope (CE) evolution. The radio spectral indices (between −1.1 and −0.3) of non-thermal PNe and candidates would imply that intense magnetic fields are active during the PN formation. We report that low-velocity WFs exhibit CO absorption bands characteristic of cool giant stars, while classical, high-velocity WFs show emission lines from shocks around post-AGB stars or photoionization from PNe. This suggests that the difference between low- and high- velocity WFs reflects intrinsically different evolutionary stages. Moreover, the nature of the newly identified source IRAS 18443−0231 is consistent with a nascent PN from a magnetized WF and could thus be one of the youngest PNe known. We also studied in detail illustrative cases of ionized emission dominated by shocks (IRAS 22568+6141) and photoionization (Vy 2-2). In IRAS 22568+6141, we reported on an energetic event that occurred around 1990, and that manifested itself as a sudden and rapid increase in the nebular brightness. A late thermal pulse in the central star provides a simple and consistent explanation for this energetic event and for its subsequent photometric and spectral evolution. In Vy 2-2, our intermediate resolution spectra revealed many new nebular recombination and forbidden emission lines that were crucial in accurately determining the new value of the abundance discrepancy factor (adf ) of 13.6±2.6, which is unusually iv high for PNe. Our analysis of high resolution spectra reveal a high-excitation central region and a pair of low-excitation bipolar lobes. We derived a kinematical age of only ≃210 yr for this nascent PN. Stellar emission lines are also detected, suggesting a wels type central star, although they could more probably be related to an irradiated close companion. This possibility is compatible with the unusually high adf, the observed nebular structures, and other emission properties which suggest that Vy 2-2 may host a post-CE binary. Chemical abundances and circumstellar mass estimates indicate Mi ≲ 0.9M⊙ for the star progenitor of Vy 2-2. Therefore, Vy 2-2 would be an illustrative observational case of the CE evolutionary phase. For the future, we have obtained near-infrared spectroscopy of nascent PNe with masers to assess their ionized emission using our previously and newly developed diagnostic diagrams, which constitute a novel methodological contribution and provide a powerful tool for the classification of obscured sources, particularly in the context of upcoming datasets from facilities such as the James Webb Space Telescope. Moreover, we envision that the technical capabilities of wide-field galactic surveys of ionized emission (traced by radio continuum emission and infrared/optical emission lines), in synergy with an artificial intelligence (AI) pipeline, could help to discover a new generation of nascent PNe. In particular, the application of an AI pipeline could provide a robust classification of sources as post-AGB stars or PNe., [ES] La morfología de las estrellas con masas iniciales (Mi) ≃ 0.8 − 8M⊙ (p.e., incluyendo el Sol) es aproximadamente esférica durante la mayor parte de su evolución, pero durante la fase de nebulosa planetaria (NP) tiende a mostrar espectaculares formas no esféricas (p.e., tipo mariposa o anulares), cuyas causas a´un no se comprenden completamente. El objetivo de esta tesis es mejorar nuestra comprensi´on de las etapas m´as tempranas de la formaci´on de NPs mediante la identificaci´on y caracterizaci´on de nuevas NPs nacientes y candidatas trazadas por la emisión máser y el continuo de radio no-térmico. Para ello, consultamos bases de datos de máseres y catálogos de continuo de radio, recopilamos imágenes y espectroscopía óptica e infrarroja publicada y de archivo, y complementamos estos datos con nuestras propias observaciones en el infrarrojo, óptico y radio. Tras un cuidadoso análisis multibanda, que incluyó la evaluación de la emisión ionizada mediante diagramas diagnósticos novedosos para distinguir entre excitación por choques y fotoionización, incrementamos el número de NPs emisoras de máser y candidatas de 10 a 23 y el de NPs no-térmicas y candidatas en el régimen centimétrico de 1 a 23. El incremento significativo en el número de NPs confirmadas y candidatas con emisión máser y/o continuo de radio no-térmico abre la posibilidad, por primera vez, de realizar estudios estad´ısticos robustos de la fase naciente de las NPs. Adem´as, identificamos 3 ‘Fuentes de Agua’ (FA) y una candidata a FA, aumentando el número de FA confirmadas de 15 a 18. Destacamos el descubrimiento de las primeras FA de baja velocidad con emisión ionizada, un grupo emergente de fuentes cuyo estudio podría ser relevante para determinar la cronología del inicio de la ionización en estrellas evolucionadas. Aunque las NPs emisoras de máser y candidatas parecen constituir un grupo heterogéneo, algunas presentan envolturas circunestelares ricas en oxígeno y estrellas centrales ricas en carbono, un canal evolutivo compatible con un pulso térmico reciente y/o evolución en envoltura común (EC). Los índices espectrales de radio (entre −1.1 y −0.3) de las NPs no-térmicas y candidatas implicarían que campos magnéticos intensos están activos durante la formación de las NPs. Reportamos que las FA de baja velocidad exhiben bandas de absorción de CO características de estrellas gigantes frías, mientras que las FA clásicas de alta velocidad presentan líneas de emisión producidas por choques en torno a estrellas post-AGB o fotoionización en NPs. Esto sugiere que la diferencia entre FA de baja y alta velocidad refleja etapas evolutivas intrínsecamente distintas. Además, la naturaleza de la fuente recientemente identificada IRAS 18443−0231 es consistente con una NP naciente procedente de una FA magnetizada y podría ser una de las NPs más jóvenes conocidas. También estudiamos en detalle casos ilustrativos de emisión ionizada dominada por choques (IRAS 22568+6141) y por fotoionización (Vy 2-2). En IRAS 22568+6141, reportamos un evento energético ocurrido alrededor de 1990, que se manifestó como un aumento súbito y rápido del brillo nebular. Un pulso térmico tardío en la estrella central proporciona una explicación simple y coherente para este evento y su posterior evolución fotométrica y espectral. En Vy 2-2, nuestros espectros vi de resolución intermedia revelaron numerosas líneas nuevas de recombinación y prohibidas que fueron cruciales para determinar con precisión un nuevo valor del factor de discrepancia de abundancias (fda) de 13.6±2.6, inusualmente alto para NPs. Nuestro análisis de espectros de alta resolución revela una región central de alta excitación y un par de lóbulos bipolares de baja excitación. Determinamos una edad cinemática de ≃210 yr para esta NP naciente. También detectamos líneas de emisión estelar que sugieren una estrella central de tipo wels, aunque probablemente estén relacionadas con una compañera cercana irradiada. Esta posibilidad es compatible con el valor inusualmente alto del fda, las estructuras nebulares observadas y otras propiedades de emisión, lo que sugiere que Vy 2-2 podría albergar un sistema binario post-EC. Las abundancias químicas y estimaciones de masa circunestelar indican Mi ≲ 0.9M⊙ para la estrella progenitora de Vy 2-2. Por tanto, Vy 2-2 ser´ıa un caso observacional ilustrativo de la fase evolutiva de envoltura común. Para el futuro, hemos obtenido espectroscopía en el infrarrojo cercano de NPs nacientes con máseres para evaluar su emisión ionizada utilizando nuestros previamente desarrollados y nuevos diagramas de diagnóstico, que constituyen una contribución metodológica novedosa y proporcionan una herramienta potente para la clasificación de fuentes oscurecidas, particularmente en el contexto de futuros catálogos de instalaciones como el James Webb Space Telescope. Además, prevemos que las capacidades técnicas de los cartografiados galácticos de emisión ionizada (trazada mediante emisión de radio continuo y líneas ópticas/infrarrojas), en sinergia con una pipeline basada en inteligencia artificial (IA), podrían ayudar a descubrir una nueva generación de NPs nacientes. En particular, la aplicación de esta pipeline de IA podría proporcionar una clasificación robusta de fuentes como estrellas post-AGB o NPs., Agradezco el apoyo y la formaci´on en el grupo Star Planet Formation and Evolution (proyectos PID2020-114461GB-I0, PID2023-146295NB-I00) y en el Instituto de Astrof´ısica de Andaluc´ıa (SEV-2017-0709 y CEX2021-001131-S), financiados por MICIU/AEI/10.13039/ 501100011033. Agradezco tambi´en el apoyo y la formaci´on en la European Southern Observatory y la ayuda predoctoral PRE2018-085518, financiada por MICIU/AEI/10.13039/ 501100011033 y por el ESF ‘Invirtiendo en tu futuro’., RC, JFG y LFM agradecen el apoyo de la beca PID2020-114461GB-I00 y del premio “Centro de Excelencia Severo Ochoa” del Instituto de Astrofísica de Andalucía (SEV-2017-0709), financiado por MCIN/AEI/10.13039/501100011033. RC también recibe apoyo de la beca predoctoral PRE2018-085518, financiada por MCIN/AEI/10.13039/501100011033 y por el Fondo Social Europeo (FSE) Invirtiendo en tu futuro. Este trabajo también cuenta con el apoyo parcial de las subvenciones R18-RT-3082 (IAA4SKA) y P20-00880, financiadas por el Consejo de Transformación Económica, Industria, Conocimiento y Universidades de la Junta de Andalucía y el Fondo Europeo de Desarrollo Regional de la Unión Europea., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (SEV-2017-0709), With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001131-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis doctoral (DoctoralThesis)

Observation and modeling of a protostellar molecular jet

  • Blázquez-Calero, Guillermo
Tesis del Departamento de radioastronomía y estructura galáctica, Instituto de Astrofísica de Andalucía. Universidad de Granada. Programa de doctorado en Física y Matemáticas (FisyMat). Leída el 18 de septiembre en el salón de actos del IAA-CSIC a las 11:00 h., [EN] The star formation process is intrinsically associated with a powerful ejection activity that is believed to play a crucial role in regulating the final mass of the young star, the star formation efficiency on larger scales, and the accretion and planet formation processes in protoplanetary disks. Highly-collimated outflows, known as jets, are launched by magnetocentrifugal processes from the close vicinity of the young stellar object (YSO) with typical velocities of ∼100 km s−1. These ejections usually exhibit a clumpy structure, composed of discrete knots of enhanced brightness, and can be observed either through their (i) hot (>500 K) ionized atomic and molecular components in optical, infrared, and centimeter radio wavelengths; or their (ii) cold (∼50-100 K) component, traced by CO and other molecular transitions at millimeter wavelengths. Jets are thought to be powerful enough to entrain ambient gas and form more massive, large-scale molecular outflows, mainly composed of cold swept up gas traveling at ∼10 km s−1. However, the jet launching mechanism, the relationship between their distinct components, the physical process by which they interact with the environment, the nature of jet knots and their relationship to episodes of sudden increase in the protostar luminosity (known as stellar outbursts) are matters of intense debate. The cold component of outflows is particularly valuable for addressing these questions because it can trace the full range of outflow velocities (∼10-100 km s−1), providing crucial insights into the interactions between the extremely fast ejections launched from the close protostellar vicinity and the surrounding ambient cloud. The very high spatial and spectral resolution provided by large, very sensitive interferometers operating at millimeter wavelengths, such as the Atacama Large Millimeter/submillimeter Array (ALMA) offers a unique opportunity to study the cold molecular component of outflows with exceptional detail. The target of the study presented in this thesis is the protostar SVS 13, located at 300 pc in the NGC 1333 star forming region. SVS 13 is the only component of a close protobinary system (with components separated by 90 au) that is detected at optical and infrared wavelengths. The various outflow components associated with the SVS 13 system, including the outstanding Herbig-Haro objects HH 7-11, have been extensively characterized in the past at different wavelengths and using a diversity of outflow tracers. Most studies indicate that the SVS 13 outflow has a near pole-on orientation, i.e., closely aligned with the line-of-sight (LOS), so observed LOS velocities are relatively unaffected by projection effects. Moreover, the SVS 13 photometry has been monitored for decades, and a stellar outburst was detected around 1990 at infrared and optical wavelengths. These properties make SVS 13 an ideal system to characterize the dynamics of outflows from YSO and to explore the relationship between outbursts and outflow activity. We present sensitive ALMA observations of the CO molecular line emission, at highangular and spectral resolution, of the nearly pole-on molecular jet driven by the outbursting protostar SVS 13. Our ALMA observations reveal several sequences of rings in individual velocity channel maps, which had remained undetected in previous observations due to its intrinsic faintness. We show that each sequence of rings traces an elongated shelllike structure with an roughly paraboloidal morphology, having its open end closer to the protostar and its apex (coinciding with a jet knot) further away from the star. These shells have also a well defined velocity gradient: the lowest velocities (∼30 km s−1) are found at the shell open end, and they progressively increase towards the shell apex, where the highest velocities (∼100 km s−1, the speed of the jet knots) are found. Although a few previous ALMA observations exhibited features suggestive of thin, shell-like structures in outflows from young stellar objects, the observations presented in this thesis allow us to characterize the morphology and kinematics of the shells with an unprecedented level of detail. This characterization, together with the estimation of the shell masses, allows us to compare the observations with physical models. In this work, we explore the possibility that the observed shells result from a wideangle ejection that originates in the vicinity of the protostar. We begin by describing the shells with a pure geometrical model which assumes that the shells have a paraboloidal morphology and are composed of material ejected simultaneously from a single location, following radial ballistic trajectories. The simplicity of this description allows us to obtain analytical equations for the geometry of the rings observed in the velocity channel maps. We then present a “tomographic” deprojection method that allows us to infer an approximate 3D morphology, as well as some kinematical aspects, of the shells. We show that the paraboloid model is particularly useful for evaluating the accuracy of the “tomographic” deprojection method. Also, we use this deprojection method to explore whether the observed shells can be explained by the most commonly invoked wind models: the extended disk wind model and the X-wind model. We find that these simple wind models present difficulties in reproducing the observed properties of the shells. We show, on the other hand, that the shell morphology and kinematics can be naturally explained with a simple, analytical model of a momentum-conserving bowshock produced by a time-variable supersonic jet. In this model, variations in the jet ejection velocity induce the formation of a two-shock structure called “internal working surface” where fast ejecta catch up with slower moving material, forming the observed knots of the jet. The overpressure in the internal working surface drives material sideways that interacts with the ambient, producing the bowshock shell. We compute the surface density of the bowshock shells and, after performing the radiative transfer, we generate synthetic intensity channel maps that compare remarkably well with the observations. Our modeling offers quantitative information on the interaction of the jet with its surroundings, such as the velocity and mass-rate at which jet material is ejected sideways from the internal working surface, the mass-rate of ambient material incorporated into the bowshock, and the density of the ambient gas. This information helps us to understand the dynamical properties of jets and how they inject mass and momentum into the environment, which are crucial aspects for understanding how stars form. Finally, in this thesis we have computed the dynamical times of the jet knots, and found that the knot closest to SVS 13 originated around 1990, coinciding with the epoch of an optical and infrared outburst experienced by SVS 13. This association provides evidence that the velocity variability that induces the formation of knots in the jet is linked to accretion bursts. Since we find that the SVS 13 knots are typically separated by dynamical times of ∼35 yr, we suggest a similar periodicity for the stellar outbursts., [ES] El proceso de la formación estelar esta intrínsecamente asociado con poderosas eyecciones, que juegan un papel crucial en la adquisición de masa por parte de la joven estrella, en la eficiencia de la formación estelar a grandes escalas y en los procesos de acreción y formación de planetas en los discos protoplanetarios. Los chorros de gas altamente colimados, también conocidos como jets, son eyectados por procesos magnetocentrífugos desde la proximidad de la estrella en formación, a velocidades de ∼100 km s−1. Los jets suelen tener una apariencia grumosa, con incrementos locales de brillo, o “nudos”, que pueden ser observados bien a través de su componente caliente (>500 K), atómica ionizada o molecular, en longitudes de onda óptica, infrarroja y centimétrica; o a través de su componente fría (50-100 K), trazada por líneas de transiciones moleculares en longitudes onda milimétricas, principalmente de CO. Se cree que los jets son lo suficientemente energéticos como para arrastrar el gas ambiente y formar flujos moleculares de gran masa y tamaño, compuestos por gas que viaja a ∼10 km s−1. Sin embargo, el mecanismo de eyección de los jets, la relación entre sus distintas componentes, el proceso físico por el cual interactúan con el entorno, la naturaleza de los nudos observados en los jets y su relación con los aumentos bruscos en la luminosidad de la protoestrella (denominados estallidos) son cuestiones intensamente debatidas en la actualidad dentro del campo de la formación estelar. La componente fría de los flujos de gas molecular, que es capaz de trazar todo el rango de velocidades (∼10- 100 km s−1), es particularmente valiosa para abordar estas cuestiones, puesto que revela cómo interactúan las eyecciones de muy alta velocidad originadas en las proximidades de la protoestrella con la nube ambiente circundante. Las observaciones de alta sensibilidad y alta resolución espacial y espectral que proporcionan los grandes interferómetros en el rango milimétrico, en particular el Atacama Large Milimeter/submillimeter Array (ALMA), ofrecen una oportunidad única para estudiar la componente molecular fría de los flujos con un detalle excepcional. Esta tesis tiene como objeto de estudio el jet molecular de la protoestrella SVS 13, situada a 300 pc en la región de formación estelar NGC 1333. SVS 13 forma parte de un sistema binario en formación, con sus componentes separadas por 90 au. De las dos componentes, SVS 13 es la única visible en longitudes de onda ópticas e infrarrojas. Los diversos fenómenos de eyección de materia asociados al sistema de SVS 13, incluyendo los brillantes objetos Herbig-Haro HH 7-11, han sido extensamente caracterizados en diferentes longitudes de onda y a través de diversos trazadores. La mayoría de los estudios indican que los flujos impulsados por SVS 13 viajan en una dirección cercana a la línea de visión y, por lo tanto, la cinemática observada a lo largo de la línea de visión es cercana a la real. Además, SVS 13, cuya fotometría ha sido monitorizada durante décadas, sufrió un estallido en torno al año 1990, observado en longitudes de onda infrarrojas y ópticas. Estas propiedades hacen que SVS 13 sea un sistema ideal para caracterizar la dinámica de los flujos de materia eyectados por los objetos estelares jóvenes y para explorar la relación entre los estallidos en la luminosidad estelar y los nudos de los jets. En esta tesis, presentamos observaciones de muy alta sensibilidad de la molécula de CO, con alta resolución angular y espectral, realizadas con ALMA, del jet molecular impulsado por la protoestrella SVS 13. Estas observaciones revelan varias secuencias de anillos en los mapas de canales de velocidad que no habían sido detectadas en observaciones anteriores debido a que su emisión es intrínsecamente débil. En este trabajo, mostramos que cada secuencia de anillos traza una cáscara alargada, con una morfología parecida a la de un paraboloide, teniendo su extremo abierto más cerca de la protoestrella y su ápice (que coincide con un nudo del jet) más alejado de la estrella. Estas cáscaras también presentan un gradiente de velocidad bien definido: las velocidades más bajas (∼30 km s−1) se encuentran en su extremo abierto, y estas aumentan progresivamente hacia su ápice, donde son más altas (∼100 km s−1, la velocidad de los nudos del jet). Aunque anteriormente ALMA ya había detectado indicios de cáscaras en algunos jets, las observaciones presentadas en esta tesis permiten caracterizar su morfología y cinemática con un nivel sin precedentes. Esta caracterización en detalle, junto con la estimación de las masas de las cáscaras, nos permite comparar las observaciones con modelos físicos. En primer lugar, exploramos la posibilidad de que las cáscaras resulten de una eyección de gran apertura (es decir, poco colimadas) que tiene su origen en las proximidades de la protoestrella. Comenzamos modelando las cáscaras con un modelo sencillo, puramente geométrico, que supone que las cáscaras tienen una morfología paraboloidal y que están compuestas de material que ha sido expulsado simultáneamante desde un origen común, siguiendo trayectorias radiales y balísticas. La simplicidad de este modelo nos permite obtener ecuaciones analíticas para la geometría de los anillos observados en los mapas de canales de velocidad. Posteriormente, presentamos un método de deproyección “tomográfica”, que nos permite inferir de forma aproximada la morfología 3D de las cáscaras, así como algunas propiedades cinemáticas. Mostramos que el modelo del paraboloide es particularmente útil para evaluar la exactitud del método de deproyección “tomográfica”. También, utilizamos este método de deproyección para explorar si las cáscaras observadas pueden ser explicadas por un modelo de viento extendido y, adicionalmente, consideramos el popular modelo de “viento X” (X-wind). Encontramos que estos modelos de viento simples tienen dificultades para reproducir las propiedades observadas de las cáscaras. Mostramos, por otro lado, que la morfología, cinemática, y masas de las cáscaras se explican de forma natural con un modelo analítico de choque de proa, producido por la interacción entre un jet supersónico con velocidad variable y el entorno. En este modelo, las variaciones de la velocidad de eyección del jet inducen la formación de unas estructuras de dos choques llamadas “superficies internas de trabajo”, donde el material rápido alcanza el material lento eyectado previamente, formando los nudos que se observan en el jet. Como consecuencia de las altas presiones en la superficie interna de trabajo, el material del jet es expulsado lateralmente e interactúa con el ambiente, produciendo el choque de proa. También obtenemos la densidad superficial de los choques de proa y, tras realizar el transporte radiativo, generamos mapas de canales sínteticos que se comparan extraordinariamente bien con las observaciones. Nuestro modelado ofrece información cuantitativa sobre la interacción entre el jet y su entorno, como la velocidad y la masa a la que el material del jet es expulsado desde la superficie interna de trabajo, la masa de material ambiente incorporada al choque de proa y la densidad del ambiente. Esta información ayuda a comprender las propiedades dinámicas de los jets y cómo inyecta masa y momento al medio ambiente, ambos cruciales para comprender cómo se forman las estrellas. Finalmente, en esta tesis hemos calculado los tiempos dinámicos de los nudos del jet, y hemos encontrado que la edad del nudo más cercano a SVS 13 coincide con la época en la que la protoestrella SVS 13 sufrió un estallido, en torno a 1990. Esta asociación evidencia que la variabilidad en la velocidad de eyección que da lugar a la formación de nudos en el jet está asociada con estos estallidos vinculados a episodios de acreción. Puesto que encontramos que los nudos están separados por escalas de tiempo de unos ∼35 años, sugerimos que los estallidos podrían ocurrir con una periodicidad similar., Guillermo Blázquez Calero acknowledges financial support from grants PRE2018-086111, PID2020-114461GB-I00, PID2023-146295NB-I00 and CEX2021-001131-S, funded by MCIN/AEI/10.13039/501100011033 and ’ESF Investing in your future’, from Junta de Andalucia (Spain) grant P20-00880 (FEDER, UE), and from ESO Science Support Discretionary Fund under the 2024 SSDF 06 project. This work makes use of the following ALMA data: ADS/JAO.ALMA#2015.1.01229.S, ADS/JAO.ALMA#2016.1.01305.S. ALMA is a partnership of ESO (representing its member states), NSF (USA) and NINS (Japan), together with NRC (Canada) and NSC and ASIAA (Taiwan) and KASI (Republic of Korea), in cooperation with the Republic of Chile. The Joint ALMA Observatory is operated by ESO, AUI/NRAO and NAOJ. This publication use images based on observations made with the NASA/ESA Hubble Space Telescope, and obtained from the Hubble Legacy Archive, which is a collaboration between the Space Telescope Science Institute (STScI/NASA), the Space Telescope European Coordinating Facility (ST-ECF/ESA) and the Canadian Astronomy Data Centre (CADC/NRC/CSA)., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001131-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis doctoral (DoctoralThesis)

Efecto de superficie e interacciones en la interfaz de sistemasde nanopartículas bimagnéticas con estructura núcleo/coraza

  • Martín Nuñez, Jorge
Programa de Doctorado en Física., [ES] En esta tesis se aborda el diseño, la síntesis y la caracterización de nuevos materiales nanoestructurados basados en nanopartículas (NPs) magnéticas, con el objetivo de sintonizar sus propiedades magnéticas y de magnetotransporte. Se estudian distintos sistemas de nanopartículas cuya complejidad estructural aumenta progresivamente: desde NPs monofásicas de Fe3O4, empleadas como sistema de referencia, pasando por interfaces bimagnéticas de Fe1-xO/Fe3O4, hasta llegar al desarrollo de novedosas estructuras multicapa tipo “cebolla”. En cada etapa se analiza cómo las interacciones interfaciales modulan el comportamiento magnético de los sistemas. Se demuestra que, mediante métodos de síntesis química, es posible obtener nanopartículas altamente cristalinas, con distribución de tamaño estrecha, e incluso diseñar de forma controlada estructuras multicapa. En primer lugar, se investigó la respuesta magnetorresistiva de películas autoensambladas de NPs de Fe3O4. Se observó que los tratamientos térmicos, aunque necesarios para incrementar la conductividad eléctrica, inducen oxidación superficial —determinada por espectroscopía de fotoelectrones de rayos X (XPS)— que suprime la magnetorresistencia, definiendo así un cuello de botella tecnológico. Sin embargo, al evaluar la respuesta termoeléctrica en medidas de efecto Seebeck de espín, se encontró que dicha oxidación superficial puede, en cambio, mejorar la señal termoeléctrica. Posteriormente, se estudiaron nanopartículas bimagnéticas núcleo/coraza Fe1-xO/Fe3O4, que presentan fuerte interacción de intercambio y un campo de exchange bias (HEB) de hasta 3030 Oe. Mediante oxidación controlada se buscó modular su respuesta magnética y, en consecuencia, su magnetorresistencia. Se identificó el papel crucial de la tensión mecánica interfacial —cuantificada por análisis geométrico de fases (GPA) y refinamiento Rietveld— en la preservación del orden antiferromagnético del núcleo de wüstita, incluso durante la oxidación. En paralelo, se desarrollaron tres sistemas de nanopartículas multicapa en los que se intercaló un separador no magnético de MgO entre fases magnéticamente ordenadas. En el sistema Fe3O4/MgO/CoFe2O4 se evidenció un fuerte acoplamiento magnético a través de la barrera de MgO (∼1 nm), que conduce a una inversión de magnetización coherente, un incremento notable de la coercitividad (HC≈6 kOe) y la aparición de un exchange bias no convencional (HB≈2850 Oe a 5 K), asociado al congelamiento colectivo de espines desordenados en la superficie externa de CoFe2O4, en un estado similar al de un vidrio de espín. En el sistema inverso, CoFe2O4/MgO/Fe3O4, se mostró que un mayor control en el crecimiento de las capas permite optimizar la respuesta magnética y desacoplar ambas fases. Finalmente, se diseñó un sistema multicapa destinado a combinar en una sola nanopartícula los efectos de HEB y el desacoplamiento magnético. Este consistió en un núcleo duro de FeO/Fe3O4 y una capa libre de Fe3O4, separadas por un espaciador de MgO. Se observó que la curva magnetorresistencia, a 300 K donde el núcleo de FeO es paramagnético, presenta una meseta típica de una válvula de espín, pero únicamente cuando el tiempo de adquisición por punto se incrementó de 10 s a 60 s. Este resultado sugiere la existencia de procesos de relajación lenta en el sistema de espines, evidenciando la compleja interrelación entre interacciones magnéticas, acoplamiento interfacial, desorden y transporte dependiente de espín en estos materiales. En conclusión, esta investigación demuestra que los fenómenos de superficie e interfaz —incluyendo tensión estructural y desorden magnético— pueden transformarse de limitaciones tecnológicas en elementos de diseño funcional. De este modo, la ingeniería de nanopartículas multicapa complejas se revela como una plataforma poderosa para generar propiedades magnéticas emergentes y abrir nuevas perspectivas en el diseño de dispositivos espintrónicos basados en nanopartículas., [EN] This thesis addresses the design, synthesis, and characterization of novel nanostructured materials based on magnetic nanoparticles (NPs), with the aim of tuning their magnetic and magnetotransport properties. Different nanoparticle systems with progressively increasing structural complexity are studied: starting from single-phase Fe3O4 NPs, used as a reference system, moving through bimagnatic Fe1-xO/Fe3O4 interfaces, and culminating in the development of novel multilayer “onion-like” structures. At each stage, the role of interfacial interactions in modulating the magnetic behavior of the systems is analyzed. It is demonstrated that chemical synthesis methods allow the production of highly crystalline nanoparticles with narrow size distributions, and even the controlled design of multilayer structures. First, the magnetoresistive response of self-assembled films of Fe3O4 NPs was investigated. It was found that thermal treatments, although necessary to enhance the electrical conductivity, induce surface oxidation —as determined by X-ray photoelectron spectroscopy (XPS)— that suppresses magnetoresistance, thus establishing a technological bottleneck. However, when evaluating the thermoelectric response through spin Seebeck effect measurements, the same surface oxidation was found to improve the thermoelectric signal. Subsequently, bimagnatic core/shell Fe1-xO/Fe3O4 nanoparticles were studied. These exhibited strong exchange interactions, with an exchange bias field (HEB) as high as 3030 Oe. Controlled oxidation was employed to tune their magnetic response and, consequently, their magnetoresistance. The crucial role of interfacial mechanical strain —quantified by geometric phase analysis (GPA) and Rietveld refinement— was identified in preserving the antiferromagnetic order of the wüstite core even during oxidation. In parallel, three novel multilayer nanoparticle systems were developed, in which a non-magnetic MgO spacer was inserted between magnetically ordered phases. In the Fe3O4/MgO/CoFe2O4 system, strong magnetic coupling across the MgO barrier (∼1 nm) was observed, leading to coherent magnetization reversal, a significant increase in coercivity (HC≈6 kOe), and the emergence of an unconventional exchange bias (HEB≈2850 Oe at 5 K), associated with the collective freezing of disordered spins on the outer surface of the CoFe2O4 phase, in a state akin to a spin glass. In the inverted CoFe2O4/MgO/Fe3O4 system, it was shown that improved control over layer growth enables optimization of the magnetic response and decoupling of the two magnetic phases. Finally, a multilayer nanoparticle system was designed to combine, within a single particle, the effects of HB and magnetic decoupling. This system consisted of a hard FeO/Fe3O4 core and a free Fe3O4 shell, separated by an MgO spacer. At 300 K, where the FeO core is paramagnetic, the magnetoresistance curve exhibited a plateau characteristic of a spin valve, but only when the acquisition time per point was increased from 10 s to 60 s. This result suggests the presence of slow spin relaxation processes, highlighting the complex interplay between magnetic interactions, interfacial coupling, disorder, and spin-dependent transport in these materials. In conclusion, this research demonstrates that surface and interfacial phenomena —including structural strain and magnetic disorder— can be transformed from technological limitations into functional design elements. Thus, the engineering of complex multilayer nanoparticles emerges as a powerful platform to generate emergent magnetic properties and to open new avenues for the design of nanoparticle-based spintronic devices., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed