Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

Repisalud
Publicación Artículo científico (JournalArticle)

Association of CD14 rs2569190 polymorphism with mortality in shock septic patients who underwent major cardiac or abdominal surgery: A retrospective study

  • Jimenez-Sousa, Maria Angeles
  • Liu, Pilar
  • Medrano, Luz Maria
  • Fernandez-Rodriguez, Amanda
  • Almansa, Raquel
  • Gómez-Sánchez, Esther
  • Rico, Lucía
  • Lorenzo, Mario
  • Fadrique, Alejandra
  • Tamayo, Eduardo
  • Resino, Salvador
The aim of this study was to investigate the relationship between the CD14 rs2569190 polymorphism and death related to septic shock in white European patients who underwent major cardiac or abdominal surgery. We carried out a retrospective study in 205 septic shock patients. The septic shock diagnosis was established by international consensus definitions. The outcome variable was the death within 28, 60 and 90 days after septic shock diagnosis. The CD14 rs2569190 polymorphism was analyzed by Agena Bioscience's MassARRAY platform. For the genetic association analysis with survival was selected a recessive inheritance model (GG vs. AA/AG). One hundred thirteen out of 205 patients (55.1%) died with a survival median of 39 days (95%CI = 30.6; 47.4). Patients with rs2569190 GG genotype had shorter survival probability than rs2569190 AA/AG genotype at 60 days (62.3% vs 50%; p = 0.035), and 90 days (62.3% vs 52.6%; p = 0.046). The rs2569190 GG genotype was associated with increased risk of septic shock-related death in the first 60 days (adjusted hazard ratio (aHR) = 1.67; p = 0.016) and 90 days (aHR = 1.64; p = 0.020) compared to rs2569190 AA/AG genotype. In conclusion, the presence of CD14 rs2569190 GG genotype was associated with death in shock septic patients who underwent major surgery. Further studies with bigger sample size are required to verify this relationship.
Repisalud
Publicación Artículo científico (JournalArticle)

National Temporal Trend Analysis of Infective Endocarditis among Patients Infected with HIV in Spain (1997-2014): A Retrospective Study

  • Muñoz-Moreno, Maria Fe
  • Ryan, Pablo
  • Álvaro-Meca, Alejandro
  • Valencia, Jorge
  • Tamayo, Eduardo
  • Resino, Salvador
BACKGROUND: People living with human immunodeficiency virus (HIV) (PLWH) form a vulnerable population for the onset of infective endocarditis (IE). We aimed to analyze the epidemiological trend of IE, as well as its microbiological characteristics, in PLWH during the combined antiretroviral therapy era in Spain. METHODS: We performed a retrospective study (1997-2014) in PLWH with data obtained from the Spanish Minimum Basic Data Set. We selected 1800 hospital admissions with an IE diagnosis, which corresponded to 1439 patients. RESULTS: We found significant downward trends in the periods 1997-1999 and 2008-2014 in the rate of hospital admissions with an IE diagnosis (from 21.8 to 3.8 events per 10,000 patients/year; p < 0.001), IE incidence (from 18.2 to 2.9 events per 10,000 patients/year; p < 0.001), and IE mortality (from 23.9 to 5.5 deaths per 100,000 patient-years; p < 0.001). The most frequent microorganisms involved were staphylococci (50%; 42.7% Staphylococcus aureus and 7.3% coagulase-negative staphylococci (CoNS)), followed by streptococci (9.3%), Gram-negative bacilli (8.3%), enterococci (3%), and fungus (1.4%). During the study period, we found a downward trend in the rates of CoNS (p < 0.001) and an upward trends in streptococci (p = 0.001), Gram-negative bacilli (p < 0.001), enterococci (p = 0.003), and fungus (p < 0.001) related to IE, mainly in 2008-2014. The rate of community-acquired IE showed a significant upward trend (p = 0.001), while the rate of health care-associated IE showed a significant downward trend (p < 0.001). CONCLUSIONS: The rates of hospital admissions, incidence, and mortality related to IE diagnosis in PLWH in Spain decreased from 1997 to 2014, while other changes in clinical characteristics, mode of acquisition, and pathogens occurred over this time.
Repisalud
Publicación Artículo científico (JournalArticle)

Epidemiological trends of sepsis in the twenty-first century (2000-2013): an analysis of incidence, mortality, and associated costs in Spain

  • Álvaro-Meca, Alejandro
  • Jimenez-Sousa, Maria Angeles
  • Micheloud, Dariela
  • Sánchez-Lopez, Ainhoa
  • Heredia-Rodríguez, María
  • Tamayo, Eduardo
  • Resino, Salvador
  • Group of Biomedical Research in Critical Care Medicine (BioCritic)
  • Fernandez-Rodriguez, Amanda
  • Martinez, Isidoro
BACKGROUND: Sepsis has represented a substantial health care and economic burden worldwide during the previous several decades. Our aim was to analyze the epidemiological trends of hospital admissions, deaths, hospital resource expenditures, and associated costs related to sepsis during the twenty-first century in Spain. METHODS: We performed a retrospective study of all sepsis-related hospitalizations in Spanish public hospitals from 2000 to 2013. Data were obtained from records in the Minimum Basic Data Set. The outcome variables were sepsis, death, length of hospital stay (LOHS), and sepsis-associated costs. The study period was divided into three calendar periods (2000-2004, 2005-2009, and 2010-2013). RESULTS: Overall, 2,646,445 patients with sepsis were included, 485,685 of whom had died (18.4%). The incidence of sepsis (events per 1000 population) increased from 3.30 (2000-2004) to 4.28 (2005-2009) to 4.45 (2010-2013) (p < 0.001). The mortality rates from sepsis (deaths per 10,000 population) increased from 6.34 (2000-2004) to 7.88 (2005-2009) to 7.89 (2010-2013) (p < 0.001). The case fatality rate (CFR) or proportion of patients with sepsis who died decreased from 19.1% (2000-2004) to 18.4% (2005-2009) to 17.9% (2010-2013) (p < 0.001). The LOHS (days) decreased from 15.9 (2000-2004) to 15.7 (2005-2009) to 14.5 (2010-2013) (p < 0.001). Total and per patient hospital costs increased from 2000 to 2011, and then decreased by the impact of the economic crisis. CONCLUSIONS: Sepsis has caused an increasing burden in terms of hospital admission, deaths, and costs in the Spanish public health system during the twenty-first century, but the incidence and mortality seemed to stabilize in 2010-2013. Moreover, there was a significant decrease in LOHS in 2010-2013 and a decline in hospital costs after 2011.
Repisalud
Publicación Artículo científico (JournalArticle)

TNFAIP3, TNIP1, and MyD88 Polymorphisms Predict Septic-Shock-Related Death in Patients Who Underwent Major Surgery

  • Jimenez-Sousa, Maria Angeles
  • Fadrique, Alejandra
  • Liu, Pilar
  • Fernandez-Rodriguez, Amanda
  • Lorenzo-López, Mario
  • Gómez-Sánchez, Esther
  • Gomez-Sanz, Alicia
  • Heredia-Rodríguez, María
  • Gómez-Pesquera, Estefanía
  • Martinez, Isidoro
  • Tamayo, Eduardo
  • Resino, Salvador
BACKGROUND: In many immune-related diseases, inflammatory responses and several clinical outcomes are related to increased NF-κB activity. We aimed to evaluate whether SNPs related to the NF-κB signaling pathway are associated with higher susceptibility to infection, septic shock, and septic-shock-related death in European patients who underwent major surgery. METHODS: We performed a case-control study on 184 patients with septic shock and 212 with systemic inflammatory response syndrome, and a longitudinal substudy on septic shock patients. Thirty-three SNPs within genes belonging to or regulating the NF-κB signaling pathway were genotyped by Agena Bioscience's MassARRAY platform. RESULTS: No significant results were found for susceptibility to infection and septic shock in the multivariate analysis after adjusting for multiple comparisons. Regarding septic-shock-related death, patients with TNFAIP3 rs6920220 AA, TNIP1 rs73272842 AA, TNIP1 rs3792783 GG, and TNIP1 rs7708392 CC genotypes had the highest risk of septic-shock-related death in the first 28 and 90 days. Also, the MyD88 rs7744 GG genotype was associated with a higher risk of death during the first 90 days. Haplotype analysis shows us that patients with the TNIP1 GAG haplotype (composed of rs73272842, rs3792783, and rs7708392) had a lower risk of death in the first 28 days and the TNIP1 AGC haplotype was associated with a higher risk of death in the first 90 days. CONCLUSIONS: The SNPs in the genes TNFAIP3, TNIP1, and MyD88 were linked to the risk of septic-shock-related death in patients who underwent major surgery.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Cyclic behavior of hybrid RC columns using High-Performance Fiber-Reinforced Concrete and Ni-Ti SMA bars in critical regions

  • Pereiro-Barceló, Javier
  • Cabañero-Escudero, Beatriz
  • Martínez-Jaén, Begoña
  • Bonet Senach, José Luís|||0000-0002-6687-5307
[EN] Thanks to their excellent deformation capacity and ductility, smart materials are now being increasingly used in the construction industry, one example being superelastic Shape Memory Alloys (SMA)such as Ni-Ti, which can recover from large strains without generating significant residual strains. The purpose of this work was to study the behavior under cyclic loading of hybrid-reinforced concrete columns containing super-elastic Ni-Ti bars and High-Performance Fiber-Reinforced Concrete (HPFRC) in their critical end regions, where plastic hinges may form (column ends). This critical region is a dissipative zone of the column where the most adverse combination of actions occurs. An experimental study was carried out to simulate inter-story columns in which the effects of the axial level and continuous or discontinuous beam-column joints were analyzed. The specimens with continuous joints were found to display greater lateral strength, ductility and energy dissipation, while those with discontinuous joints underwent smaller residual displacements and less damage in the critical regions of the columns., The study described here forms part of the research undertaken at the Concrete Science and Technology Institute (ICITECH) of the Universitat Politecnica de Valencia (UPV). This work was supported by the Spanish Ministry of Economy and Competitiveness through Project BIA2012-32645, and by the European Union through European Regional Development Funds (ERDF). The authors wish to thank the Spanish Ministry of Education, Culture and Sport for Grant FPU12/01451.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Design Recommendations for Columns Made of Ultra-High-Performance Concrete and NiTi SMA Bars

  • Pereiro-Barceló, Javier
  • Martínez-Jaén, Begoña
  • Cabañero-Escudero, Beatriz
  • Bonet Senach, José Luís|||0000-0002-6687-5307
[EN] The use of new materials in construction endows structures with better mechanical characteristics. The combination of ultra-high-performance concrete (UHPC) and nickel and titanium (NiTi) shape memory alloy (SMA) improves the behavior of building structures by increasing both their ductility and dissipation energy due to the low-damage and self-centering properties of NiTi SMA. Since UHPC and NiTi SMA are expensive materials and still scarce in distribution channels, this article tries to offer design recommendations to reduce the length of the column-beam connection in which these new materials should be introduced, leaving the rest of the column with conventional materials. To achieve this, a nonlinear static pushover analysis of columns using finite element software, SeismoStruct, was performed. This model was calibrated using experimental results. Next, a parametric analysis was carried out to propose the design recommendations. Results indicated that an adequate design for the column-beam connection, considering both economy and performance, should include a main zone with UHPC and SMA reinforcements, a transition zone with UHPC and steel reinforcements, and another zone with conventional reinforced concrete. The transition zone improved the hybrid column's performance without excessively raising the cost. The main zone length, the transition zone length, and the strength of the concrete in the rest of the column must be determined to ensure that the critical section of the column was in the main zone to develop the maximum strength and ductility. The length of the main zone depended on the compressive strength of the conventional concrete, the relative axial load of the column, and the required ductility., This work was supported by the Spanish Ministry of Economy and Competitiveness through Project BIA2012-32645 and by the European Union through European Regional Development Funds (ERDF). The project was executed at the Concrete Science and Technology Institute (ICITECH) of the Universitat Politècnica de València (UPV). The article processing charge was paid by the University of Alicante (UA). The authors wish to thank the Spanish Ministry of Education, Culture and Sport for Grant FPU12/01451.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Cyclic response of precast column-to-foundation connection using UHPC and Ni-Ti SMA reinforcements in columns

  • Pereiro-Barceló, Javier
  • Bonet Senach, José Luís|||0000-0002-6687-5307
  • Rueda-García, Lisbel|||0000-0002-2061-1656
  • Albiol Ibáñez, José Ramón|||0000-0003-3049-9693
[EN] Earthquakes are catastrophic natural events with a special impact on reinforced concrete structures due to the horizontal loads that they introduce into structures. To adequately resist an earthquake, a precast structure must have a high deformation capacity, dissipate energy in each earthquake cycle, undergo less damage and fewer residual deformations. To achieve all this, the behaviour of precast columns made with UPHC was herein experimentally analysed. Steel rebars were replaced with Ni-Ti shape memory alloy (SMA) bars with super elasticity (SE) in the critical zone of the column-to-foundation connection. The Ni-Ti SMA bars crossed the interface between the column and foundation. Two types of connection with the foundation were studied: smooth pocket type and protruding bar type. Columns were subjected to constant compression and a cyclic lateral load. Rocking behaviour was observed at the connection critical section. The use of advanced materials allowed a moment-rotation behaviour of the connection to be developed without any significant damage. Low residual deformations were observed while testing because of both the damage in UHPC was low and the superelasticity of the Ni-Ti SMA bars., This paper forms part of a research line carried out at the Institute of Concrete Science and Technology (ICITECH) of the Universitat Politecnica de Valencia. The authors wish to thank to the Government of Spain Ministry of Economy and Competitiveness for the support it pro-vided through Project BIA2012-32645, to the Government of Spain Ministry of Science and Innovation for the project RTI2018-099091-B-C21-AR, and the grant BES-2016-078010, to the European Union for the financial support with FEDER funds and to the Government of Spain Ministry of Education, Culture and Sports for grant FPU12/01451.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Behaviour of retrofited precast UHPC and Ni-Ti SMA column-to-foundation connection with CFRP wrapping layers

  • Pereiro-Barceló, Javier
  • Bonet, José L.
  • Rueda-García, Lisbel
  • Ciurana-Tatay, Álvaro
  • Pereiro-Barceló, Javier|||/items/6dce1875-46f5-4715-9229-958f7be7228d
Four precast column-to-foundation connection specimens, previously tested under lateral reversed cyclic loading and constant axial load (first-stage tests), were repaired with Carbon Fibre Reinforced Polymer (CFRP) layers in the areas where plastic hinges had formed and were retested under the same loads (second-stage tests). The columns were originally manufactured with ultrahigh-performance concrete (UHPC) with high stee-fibre content (volumetric steel/fibre ratio 1.9%). The steel bars in the connection were replaced with superelastic Ni-Ti SMA bars that crossed the column/foundation interface. Two types of connection between the precast column and the foundation were analysed: protruding bars and smooth pocket bars (SP). The specimens were subjected to the same constant level of relative axial load in both the first and second-stage tests. The objective was to determine whether the initial performance of precast UHPC and SMA reinforced column-to-foundation connections against lateral cyclic loads can be restored after a seismic event by means of simple and economic retrofitting. The effectiveness of the number of strengthening CFRP layers was also studied (two or three CFRP wrapping layers) for each column-to-foundation connection type. The main results for PB and SP connection specimens with respect to the original specimens were respectively: an average strength capacity loss of 8% and 19%, displacement ductility increase of 8% and 42%, dissipated energy 48% and 53% higher and initial stiffness 9.5% and 21% lower. No significant differences were observed in the repairs done with two or three CFRP wrapping layers.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Design Recommendations for Columns Made of Ultra-High-Performance Concrete and NiTi SMA Bars

  • Pereiro-Barceló, Javier
  • Bonet, José L.
  • Martínez-Jaén, Begoña
  • Cabañero-Escudero, Beatriz
  • Pereiro-Barceló, Javier|||/items/6dce1875-46f5-4715-9229-958f7be7228d
The use of new materials in construction endows structures with better mechanical characteristics. The combination of ultra-high-performance concrete (UHPC) and nickel and titanium (NiTi) shape memory alloy (SMA) improves the behavior of building structures by increasing both their ductility and dissipation energy due to the low-damage and self-centering properties of NiTi SMA. Since UHPC and NiTi SMA are expensive materials and still scarce in distribution channels, this article tries to offer design recommendations to reduce the length of the column-beam connection in which these new materials should be introduced, leaving the rest of the column with conventional materials. To achieve this, a nonlinear static pushover analysis of columns using finite element software, SeismoStruct, was performed. This model was calibrated using experimental results. Next, a parametric analysis was carried out to propose the design recommendations. Results indicated that an adequate design for the column–beam connection, considering both economy and performance, should include a main zone with UHPC and SMA reinforcements, a transition zone with UHPC and steel reinforcements, and another zone with conventional reinforced concrete. The transition zone improved the hybrid column’s performance without excessively raising the cost. The main zone length, the transition zone length, and the strength of the concrete in the rest of the column must be determined to ensure that the critical section of the column was in the main zone to develop the maximum strength and ductility. The length of the main zone depended on the compressive strength of the conventional concrete, the relative axial load of the column, and the required ductility.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Cyclic response of precast column-to-foundation connection using uhpc and Ni–Ti SMA reinforcements in columns

  • Pereiro-Barceló, Javier
  • Bonet, José L.
  • Rueda-García, Lisbel
  • Albiol-Ibáñez, José Ramón
  • Pereiro-Barceló, Javier|||/items/6dce1875-46f5-4715-9229-958f7be7228d
Earthquakes are catastrophic natural events with a special impact on reinforced concrete structures due to the horizontal loads that they introduce into structures. To adequately resist an earthquake, a precast structure must have a high deformation capacity, dissipate energy in each earthquake cycle, undergo less damage and fewer residual deformations. To achieve all this, the behaviour of precast columns made with UPHC was herein experimentally analysed. Steel rebars were replaced with Nisingle bondTi shape memory alloy (SMA) bars with superelasticity (SE) in the critical zone of the column-to-foundation connection. The Nisingle bondTi SMA bars crossed the interface between the column and foundation. Two types of connection with the foundation were studied: smooth pocket type and protruding bar type. Columns were subjected to constant compression and a cyclic lateral load. Rocking behaviour was observed at the connection critical section. The use of advanced materials allowed a moment-rotation behaviour of the connection to be developed without any significant damage. Low residual deformations were observed while testing because of both the damage in UHPC was low and the superelasticity of the Nisingle bondTi SMA bars.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Mass spectrometry vs immunofixation for treatment monitoring in multiple myeloma

  • Puig, Noemí|||0000-0001-7535-3861
  • Contreras, María Teresa|||0000-0002-2264-7791
  • Agulló, Cristina
  • Martínez-López, Joaquín|||0000-0001-7908-0063
  • Oriol, Albert|||0000-0001-6804-2221
  • Blanchard, María Jesús
  • Ríos-Tamayo, Rafael|||0000-0001-8193-1402
  • Martín Sánchez, Jesús|||0000-0003-4250-4824
  • Iñigo Rodríguez, María Belén
  • Sureda, Anna|||0000-0002-1238-6970
  • Hernández, Miguel Teodoro|||0000-0002-6576-7881
  • de la Rubia, Javier|||0000-0002-8354-768X
  • González-Calle, Verónica|||0000-0002-5493-6707
  • Krsnik, Isabel|||0000-0002-2912-5072
  • Cabañas Perianes, Valentín|||0000-0002-6248-2549
  • Palomera, Luis|||0000-0003-0359-7191
  • Moraleda, José María|||0000-0001-9080-1466
  • Bargay, Joan|||0000-0002-6739-3916
  • Cedena, María Teresa|||0000-0001-5851-3720
  • Paiva, Bruno|||0000-0003-1977-3815
  • Rosiñol, Laura|||0000-0002-2534-9239
  • Bladé Creixenti, Juan|||0000-0002-4563-3405
  • San Miguel, Jesús|||0000-0002-9183-4857
  • Lahuerta, J. J.|||0000-0002-3393-9570
  • Mateos, M. V.|||0000-0003-2390-1218
Monitoring of the monoclonal protein (M-protein) by electrophoresis and/or immunofixation (IFE) has long been used to assess treatment response in multiple myeloma (MM). However, with the use of highly effective therapies, the M-protein becomes frequently undetectable, and more sensitive methods had to be explored. We applied IFE and mass spectrometry (EXENT&FLC-MS) in serum samples from newly diagnosed MM patients enrolled in the PETHEMA/GEM2012MENOS65 obtained at baseline (n 5 223), and after induction (n 5 183), autologous stem cell transplantation (n 5 173), and consolidation (n 5 173). At baseline, the isotypes identified with both methods fully matched in 82.1% of samples; in the rest but 2 cases, EXENT&FLC-MS provided additional information to IFE with regards to the M-protein(s). Overall, the results of EXENT&FLC-MS and IFE were concordant in.80% of cases, being most discordances due to EXENT&FLC-MS but IFE cases. After consolidation, IFE was not able to discriminate 2 cohorts with different median progression-free survival (PFS), but EXENT&FLC-MS did so; furthermore, among IFE patients, EXENT&FLC-MS identified 2 groups with significantly different median PFS (P 5.0008). In conclusion, compared with IFE, EXENT&FLC-MS is more sensitive to detect the M-protein of patients with MM, both at baseline and during treatment, and provides a more accurate prediction of patients' outcome. This trial was registered at www.clinicaltrials.gov as #NCT01916252.