Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

Helvia. Repositorio Institucional de la Universidad de Córdoba
Publicación Artículo científico (JournalArticle)

Multivalent intercalation in Prussian blue analogues as a novel recovery method from spent Li-ion batteries

  • Carnero-Roldán, Victoria
  • Licari, Adrián
  • López Chías, Alejandro
  • Fernández-Merino, Ángela
  • La Mantia, Fabio
  • Trócoli, Rafael
Embargado hasta 01/05/2028, Finding alternative extraction sources of principal components for the manufacturing of Li-ion batteries has become of great interest owing to the ubiquitous presence of this storage system, from mobile to electric vehicles. Battery recycling has the potential to reduce reliance on conventional raw sources; however, current technologies suffer from numerous drawbacks, including environmental issues and low selectivity. The use of an intercalation material, a Prussian Blue Analogue, for the recovery of multivalent cations (Ni2+ and Co2+) from spent Li-ion batteries is demonstrated for the first time in this work. Firstly, the capacity of the material to intercalate the cations of interest in aqueous media was proven by a combination of electrochemical, structural, and composition analysis of the electrode and electrolyte, subsequently a novel electrochemical approach to extract Ni and Co from a NMC leachate was developed, being able to produce a recovered solution with a purity of 99.99% in Ni and Co in a single step owing to the extraordinary selectivity of Nickel Hexacyanoferrate towards these cations. These performances, combined with the reversibility of the material and the well-known low cost of Prussian Blue Analogues, open a promising new alternative for battery recycling.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

ZnO Nanostars Decorated with Mass-Selected Au Clusters for Photoluminescence

  • Di Mari, Gisella Maria
  • Mineo, Giacometta
  • Hoddinott, Henry
  • Strano, Vincenzina
  • Lentini Campallegio, Claudio
  • Mundet, Bernat
  • Martí-Sànchez, Sara
  • Franzò, Giorgia
  • Arbiol, Jordi
  • Von Issendorff, Bernd
  • Held, Georg
  • Palmer, Richard
  • Bruno, Elena
  • Mirabella, Salvo
  • Spadaro, Maria Chiara
Hybrid nanostructures combining semiconductor materials and noble metal clusters of atoms (nanoparticles) are of high interest in the energy sector and catalysis, with the idea of tuning the physicochemical properties of the system toward the desired performance. The design of this type of complex system requires the appropriate selection of the material combination to optimize the desired properties. However, less attention has been devoted to the effect of cluster size. In this work, we investigate the size and density effects for mass-selected monometallic Au clusters decorating ZnO-based nanostars. The Au clusters were prepared with narrow control of their size, in terms of atoms per cluster, via cluster deposition in a vacuum and mass selection with a cluster beam source. We study the coupling of ZnO nanostars with deposited Au N (N = 55, 147, and 309) clusters. We exploit transmission electron microscopy and Rutherford backscattering spectrometry for the structural characterization and for the determination of Au cluster density, obtaining 3.43 × 1012, 4.55 × 1011, and 7.98 × 1010 clusters/cm2 for samples decorated with Au clusters containing 55, 147, and 309 atoms, respectively. Moreover, we highlight the formation of a Schottky junction by performing photoluminescence investigations. We find distinctive changes in the behavior of the visible and UV emission as a function of the cluster size and density on the ZnO-based nanostars, identifying an increase of the photoluminescence efficiency with the decrease of the cluster dimension. Our findings indicate the enormous potential that a proper selection of cluster size offers in the fabrication of nanocomposite materials with precise electronic properties., This work was financially supported by the European Union–next Generation EU, Mission 4, Component 2 via the project NanoStore, under the “PRIN PNRR 2022” call (project ID: P20227TNLX, CUP number B53D23028380001 and E53D23016050001). Funded also by the European Union as part of the Horizon Europe call HORIZON-INFRA-2021-SERV-01 under grant agreement number 101058414 and cofunded by UK Research and Innovation (UKRI) under the UK government’s Horizon Europe funding guarantee (grant number 10039728) and by the Swiss State Secretariat for Education, Research and Innovation (SERI) under contract number 22.00187. Views and opinions expressed are, however, those of the author(s) only and do not necessarily reflect those of the European Union or the UK Science and Technology Facilities Council or the Swiss State Secretariat for Education, Research and Innovation (SERI). Neither the European Union nor the granting authorities can be held responsible for them. Authors acknowledge the use of instrumentation as well as the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA) and funding from Grant IU16-014206 (METCAM-FIB) to ICN2 funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. ICN2 is founding member of e-DREAM. (29) ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. Authors acknowledge the use of the InCAEM infrastructure of the Advanced Materials programme by the Spanish Government with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya. The authors thank support from the project AMaDE (PID2023-149158OB-C43), funded by MCIN/ AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. ICN2 is supported by the Severo Ochoa program from Spanish MCIN / AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme / Generalitat de Catalunya.Cluster deposition was financially supported by both the Materials and Manufacturing Academy (M2A), part funded by the European Social Fund through the Welsh Government and the Engineering and Physical Sciences Research Council (EPSRC), and by Diamond Light Source Ltd through studentship [STU0385]. This work was supported by the project “NANOscience for STRatEgic applicatioNs from Green to healTH (NANO STRENGTH)”-Linea di Intervento 1-Progetti di Ricerca Collaborativa del “PIAno di inCEntivi per la RIcerca di Ateneo 2024/2026 Università di Catania., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Anisotropic growth of ferberite (FeWO4) on W(110) by high-temperature oxygen-assisted molecular beam epitaxy

  • Gutiérrez-Cuesta, Clara
  • del Campo, Adolfo
  • Rojo-Silva, V.
  • Marco, J.F.
  • Cojocariu, Iulia
  • Szpytma, Marcin
  • Fevola, Giovanni
  • Mascaraque, Arantzazu
  • Menteş, Tevfik Onur
  • Locatelli, Andrea
  • Quesada, Adrián
  • de la Figuera, Juan
  • Prieto, J. E.
8 pages, 6 figures, 1 table, We report on the growth of nanowires of ferberite (FeWO<inf>4</inf>) by high-temperature oxygen-assisted molecular beam epitaxy on W(110). This multifunctional material has promising applications in different fields. The wires extend for several millimeters in length, with widths in the hundreds and heights in the tens of nanometers. We have monitored the growth process by real-time low-energy electron microscopy and characterized the wires in-situ by low-energy electron microscopy and laterally-resolved X-ray absorption and photoelectron spectroscopies. Further analysis was performed ex-situ by atomic force and optical microscopies as well as by Raman spectroscopy. The growth of ferberite on W(110) was possible by dosing iron in a molecular oxygen atmosphere likely due to the formation of highly mobile WO<inf>x</inf> units that can be incorporated into the anisotropic wolframite structure, which in turn is responsible for the highly anisotropic growth. We propose that the same method may be used for the growth of other tungstate or related compounds., This work is supported by Grants PID2021-124585NB-C31, PID2021-124585NB-C33, TED2021-130957B-C54 and TED2021-130957B-C51 funded by MCIN/AEI/10.13039/501100011033, by “ERDF A way of making Europe” and by the “European Union NextGenerationEU/PRTR”; by Grant Mag4TIC-CM funded by the TEC-2024/TEC-380 program of the Comunidad de Madrid and by the BEETHOVEN project funded by the European Commission under grant agreement 101129912. It is also funded by the European Union as part of the Horizon Europe call HORIZON-INFRA-2021-SERV-01 under grant agreement number 101058414 and co-funded by UK Research and Innovation (UKRI) under the UK government’s Horizon Europe funding guarantee (grant number 10039728) and by the Swiss State Secretariat for Education, Research and Innovation (SERI) under contract number 22.00187. Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or the European Education and Culture Executive Agency (EACEA) or the UK Science and Technology Facilities Council or the Swiss State Secretariat for Education, Research and Innovation (SERI). Neither the European Union nor EACEA or the granting authorities can be held responsible for them., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High-temperature oxygen-assisted molecular beam epitaxy of BaWO4 on W(110): growth mechanism and structural characterization

  • Gutiérrez-Cuesta, Clara
  • Rojo-Silva, V.
  • Prieto, J. E.
  • Mandziak, Anna
  • Nita, Pawel
  • Del Campo, Adolfo
  • Kwiatek-Maroszek, Natalia
  • Cojocariu, Iulia
  • Szpytma, Marcin
  • Fevola, Giovanni
  • Mascaraque, Arantzazu
  • Marco, J.F.
  • Onur Menteş, Tevfik
  • Locatelli, Andrea
  • Quesada, Adrián
  • de la Figuera, Juan
8 pages, 6 figures, 1 table, We have studied the growth of barium tungstate, BaWO4, by high-temperature oxygen-assisted molecular beam epitaxy on W(110). Barium tungstate grows in the form of isosceles triangular-shaped islands, tens of micrometers wide and tens of nanometers in height. The growth was monitored in real time by low-energy electron microscopy and characterized in situ by low-energy electron diffraction, X-ray absorption and X-ray photoelectron spectroscopies. Further ex situ characterization was performed by optical and atomic force microscopies and Raman spectroscopy. Barium tungstate growth on W(110) was performed by dosing only barium in a molecular oxygen atmosphere due to incorporation of W atoms from the W(110) substrate. The islands correspond to the BaWO4 (011) crystallographic orientation and their sides are aligned along the [001] and [11̄1] directions of the BaWO4 crystal., This work was supported by Grants PID2021-124585NB-C31 and PID2021-124585NB-C33, grant Mag4TIC-CM funded by the TEC-2024/TEC-380 program of the Comunidad de Madrid and by the BEETHOVEN project funded by the European Commission under grant agreement 101129912. It was also funded by the European Union as part of the Horizon Europe call HORIZON-INFRA-2021-SERV-01 under grant agreement number 101058414 and co-funded by UK Research and Innovation (UKRI) under the UK government’s Horizon Europe funding guarantee (grant number 10039728) and by the Swiss State Secretariat for Education, Research and Innovation (SERI) under contract number 22.00187. Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or the European Education and Culture Executive Agency (EACEA) or the UK Science and Technology Facilities Council or the Swiss State Secretariat for Education, Research and Innovation (SERI). Neither the European Union nor EACEA or the granting authorities can be held responsible for them. This work has received support from the European Union under the Horizon Europe programme, project NEPHEWS– Neutrons and Photons Elevating Worldwide Science (No. 101131414)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

One-pot fabrication of GA-functionalized Cu-nanoparticles by pulsed laser ablation for electrochemical biosensors development

  • Iacono, Valentina
  • Rabelo Freitas, Helena
  • Pulvirenti, Luca
  • Piper, Andrew
  • Merkoçi, Arben
  • Spadaro, Maria Chiara
  • Arbiol, Jordi
  • Ruffino, Francesco
  • Mirabella, Salvo
Functionalized nanoparticles (NPs) are widely used in nanobiosensor fabrication providing improved selectivity and good conductivity. Synthesis of functional nanomaterials is often costly and typically requires several functionalization steps. In this work, we used Pulsed Laser Ablation in Liquids (PLAL) to synthetize and functionalize at the same time copper (Cu) NPs with glutamic acid (GA). A Cu target immersed in a GA solution and hit by a laser led to Cu ablation, NP formation and amine groups bonding at the NPs surface. The GA-functionalized Cu NPs were immobilized onto an electrode and linked to antibodies for alpha-synuclein protein. A successful protein detection was achieved through electrochemical impedance spectroscopy (EIS) measurements at concentration in the pg/mL range. A careful optimization of NP synthesis showed an improved experimental LoD (10 pg/mL) by varying the amount of GA- Cu NPs and the PLAL environment, demonstrating this one-pot fabrication of GA-functionalised Cu-nanoparticles by PLAL as a valuable method for high sensitivity electrochemical sensing electrode., This work has been partially funded by European Union (NextGeneration EU), through the MUR-PNRR project SAMOTHRACE (Grant No. ECS00000022). The authors thank the Bio-nanotech Research and Innovation Tower (BRIT) laboratory of the University of Catania for the PHI Versa Probe XPS facility and Prof. G. G. Condorelli (University of Catania) for XPS measurements provided. ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. The authors thank support from the project AMaDE (PID2023-149158OB-C43), funded by MCIN/ AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. Grant RED2022-134508-T (CAT&SCALE) funded by MCIN/AEI /10.13039/501100011033. ICN2 is supported by the Severo Ochoa program from Spanish MCIN / AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme / Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. ICN2 is founding member of e-DREAM ​[59]. Partially funded also by the European Union as part of the Horizon Europe call HORIZON-INFRA-2021-SERV-01 under grant agreement number 101058414 and co-funded by (UKRI) under the UK government’s Horizon Europe funding guarantee (grant number 10039728) and by the Swiss State Secretariat for Education, Research and Innovation (SERI) under contract number 22.00187. Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or the UK Science and Technology Facilities Council or the Swiss State Secretariat for Education, Research and Innovation (SERI). Neither the European Union nor the granting authorities can be held responsible for them., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Waste-to-MoS2 binder-free 2H-MoS2 microflowers for ammonium-ion supercapacitors with operando mechanistic insights

  • Ursino, F.
  • Di Mauro, A.
  • Mineo, Giacometta
  • Pulvirenti, Luca
  • Ariese, F.
  • Ramanan, C.
  • Martin-Diaconescu, Vlad
  • Simonelli, Laura
  • Alarcon, C.
  • Salutari, Francesco
  • Spadaro, Maria Chiara
  • Arbiol, Jordi
  • Cabot, Andreu
  • Terrasi, Antonio
  • Mirabella, Salvo
Developing sustainable energy-storage devices is an increasingly urgent challenge, yet the conversion of recycled feedstocks into high-performance, binder-free electrodes operating in environmentally friendly electrolytes remains underexplored. Here, we synthesize MoS<inf>2</inf> nanostructures from Mo-based industrial waste via hydrothermal sulfurization and systematically investigate the effects of precursor-solution pH and hydrothermal temperature on morphology, structure, and electrochemical behaviour. Microscopy and spectroscopy confirm the formation of layered 2H-MoS<inf>2</inf> and show that higher temperature promotes microflower-like architectures and suppresses oxygen-containing residues, consistent with more complete sulfurization. The materials were directly evaluated as binder-free electrodes in 1 M (NH<inf>4</inf>)<inf>2</inf>SO<inf>4</inf>, exhibiting quasi-rectangular voltammograms and surface-dominated charge storage. Increasing the hydrothermal temperature enhances the capacitance by ∼33% at 5 mV s<sup>−1</sup>. By combining microflower-like MoS<inf>2</inf> with a carbon paper substrate, the specific capacitance reaches 1200 F g<sup>−1</sup> at 5 mV s<sup>−1</sup>, with improved rate capability (300 F g<sup>−1</sup> at 10 A g<sup>−1</sup>). A CR2032 proof-of-concept device assembled with a biochar counter electrode delivers 309 F g<sup>−1</sup> at 1 A g<sup>−1</sup> and an energy/power density of 52 Wh kg<sup>−1</sup> at 550 W kg<sup>−1</sup>. Operando X-ray absorption spectroscopy and Raman measurements reveal intermediate structural/chemical changes during cycling, providing insight into the interfacial storage mechanism and degradation pathways. Overall, this work demonstrates a viable route to valorise Mo-based waste into high-performance binder-free MoS<inf>2</inf> electrodes for ammonium-ion supercapacitor devices., Raman, XAS and part of TEM measurements shown in this work were executed as part of proposal 20250330052 in ReMade@ARI project, hence funded by the European Union as part of the Horizon Europe call HORIZON-INFRA-2021-SERV-01 under grant agreement number 101058414 and co-funded by UK Research and Innovation (UKRI) under the UK government's Horizon Europe funding guarantee (grant number 10039728) and by the Swiss State Secretariat for Education, Research and Innovation (SERI) under contract number 22.00187. Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or the UK Science and Technology Facilities Council or the Swiss State Secretariat for Education, Research and Innovation (SERI). Neither the European Union nor the granting authorities can be held responsible for them. XAS experiments were performed at the ALBA Synchrotron (BL-22 CLÆSS) with the collaboration of ALBA staff as part of experiment 20250330052. The electrochemical measurements were performed thanks to the Italian ministry MUR-PNRR project SAMOTHRACE (ECS00000022) by the European Union (NextGeneration EU). Materials and reagents were purchased through the project “NANOscience for STRatEgic applicatioNs from Green to healTH (NANO STRENGTH)” - Linea di Intervento 1- Progetti di Ricerca Collaborativa del “PIAno di inCEntivi per la RIcerca di Ateneo 2024/2026 Università di Catania. Part of the TEM measurements were funded by the European Union – next Generation EU, Mission 4, Component 2 via the project NanoStore, under the “PRIN PNRR 2022” call, project ID: P20227TNLX, CUP number: I53D23006650001. ICN2 is supported by the Severo Ochoa program from Spanish MCIN / AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme / Generalitat de Catalunya. ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. Authors acknowledge support from the Advanced Materials programme by the Spanish Government with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya (In-CAEM Project). The authors thank support from the project AMaDE (PID2023-149158OB-C43), funded by MCIN/ AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. Part of TEM measurements has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. ICN2 is founding member of e-DREAM [83]., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed