Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 39
Encontrada(s) 1 página(s)

Repositorio Digital de la UPF
Publicación Artículo científico (JournalArticle)

Quantitative characterization of the 3D self-organization of PDAC tumor spheroids reveals cell type and matrix dependence through advanced microscopy analysis

  • Hernández-Hatibi, Soraya
  • Borau, Carlos
  • Martínez Bosch, Neus
  • Navarro, Pilar
  • García-Aznar, José Manuel
  • Guerrero, Pedro E.
Pancreatic ductal adenocarcinoma (PDAC) is characterized by an abundant tumor-associated stroma composed from pancreatic stellate cells, which play a critical role in tumor progression. Developing accurate in vitro models requires understanding the complex interactions between tumor cells and their microenvironment. In this study, we present a quantitative imaging-based characterization of the three dimensional (3D) self-organization of PDAC tumour spheroids using a microfluidic platform that mimics key aspects of the tumor microenvironment. Our model incorporates collagen type I hydrogels to recreate the extracellular matrix, activated human pancreatic stellate cells (HPSCs), and various tumor cell types. Advanced imaging techniques, including Lattice Lightsheet Microscopy, allowed us to analyze the 3D growth and spatial organization of the spheroids, revealing intricate biomechanical interactions. Our results indicate that alterations in matrix properties-such as stiffness, pore size, and hydraulic permeability-due to variations in collagen concentration significantly influence the growth patterns and organization of PDAC spheroids, depending on tumor subtype and epithelial-mesenchymal phenotype. Higher collagen concentrations promoted larger spheroids in epithelial-like cell lines, while mesenchymal-type cells required increased collagen for self-organization into smaller spheroids. Furthermore, coculture with HPSCs affected spheroid formation distinctly based on each PDAC cell line's genetic and phenotypic traits. HPSCs had opposing effects on epithelial-like cell lines: one cell line exhibited enhanced spheroid growth, while another showed inhibited formation, whereas mesenchymal-like spheroids showed minimal impact. These results provide insights into tumor-stroma interactions, emphasizing the importance of the cell-specific and matrix-dependent factors for advancing our understanding of PDAC progression and informing future therapeutic strategies., This work is part of the project PID2021-122409OB-C21 funded by MCINN/AEI/10.13039/501100011033/FEDER, UE. The authors would like to acknowledge the European Research Council (ERC) under the EU's Horizon 2020 programme (ICoMICs, G.A.nr. 101018587) (J.M.G.A.), the MICINN/ Instituto de Salud Carlos III (ISCIII)-FEDER (Grant No. PI20/00625 and PI23/00591) (P.N.), the FJC2021-048046-I funded MCINN/AEI/ and the EU "NextGenerationEU"/PRTR" (P.E.G), and the pre-doctoral grants for the training of doctors funded by the MICINN (PRE2019-090264) (S.H.H).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Collagen-laponite nanoclay hydrogels for tumor spheroid growth

  • Alamán-Díez, Pilar
  • Borau, Carlos
  • Guerrero, Pedro Enrique
  • Amaveda, H.
  • Mora Alfonso, Mario
  • Fraile, José M.
  • García-Gareta, Elena
  • García-Aznar, José Manuel
  • Pérez, María Ángeles
The extracellular matrix (ECM) plays an important regulatory role in the development and progression of tumoral tissue. Its functions and properties are crucial in determining tumor cell behavior such as invasion, migration, and malignancy development. Our study explores the role of collagen type I in cancer development and spread using engineered tumor models like multicellular spheroids grown in collagen-based hydrogels to simulate early tumor formation. We employ microfluidic techniques to test the hypothesis that (i) adding Laponite nanoclay to collagen hydrogels modifies mechanical and rheological properties and (ii) changing the stiffness of the collagen microenvironment affects tumor spheroid growth. Our findings support our theories and suggest the use of ECM components and engineered tumor models in cancer research, offering a biocompatible and biomimetic method to tailor the mechanical properties of conventional collagen hydrogels., Authors would like to acknowledge the Spanish Ministry of Economy and Competitiveness through Projects: PID2020-113819RB-I00, PID2021-122409OB-C21, and PID2021-125762NB-I00. This work has also received founding from a Horizon 2020─RIA project (Topic SC1-DTH-07-2018, PRIMAGE grant agreement no: 826494), and the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (ICoMICS grant agreement No 101018587). PAD gratefully acknowledges the support of the Government of Aragon (Grant No 2018-22). EGG is funded by a Ramon & Cajal Fellowship (RYC2021-033490-I, funded by MCIN/AEI/10.13039/501100011033 and the EU“Next GenerationEU/PRTR”)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hydrocolloids of egg white and gelatin as a platform for hydrogel-based tissue engineering

  • Pele, Karinna Georgiana
  • Amaveda, H.
  • Mora Alfonso, Mario
  • Marcuello, Carlos
  • Lostao, Anabel
  • Alamán-Díez, Pilar
  • Pérez-Huertas, Salvador
  • Pérez, María Ángeles
  • García-Aznar, José Manuel
  • García-Gareta, Elena
This article belongs to the Special Issue Hydrogel-Based Scaffolds with a Focus on Medical Use., Innovative materials are needed to produce scaffolds for various tissue engineering and regenerative medicine (TERM) applications, including tissue models. Materials derived from natural sources that offer low production costs, easy availability, and high bioactivity are highly preferred. Chicken egg white (EW) is an overlooked protein-based material. Whilst its combination with the biopolymer gelatin has been investigated in the food technology industry, mixed hydrocolloids of EW and gelatin have not been reported in TERM. This paper investigates these hydrocolloids as a suitable platform for hydrogel-based tissue engineering, including 2D coating films, miniaturized 3D hydrogels in microfluidic devices, and 3D hydrogel scaffolds. Rheological assessment of the hydrocolloid solutions suggested that temperature and EW concentration can be used to fine-tune the viscosity of the ensuing gels. Fabricated thin 2D hydrocolloid films presented globular nano-topography and in vitro cell work showed that the mixed hydrocolloids had increased cell growth compared with EW films. Results showed that hydrocolloids of EW and gelatin can be used for creating a 3D hydrogel environment for cell studies inside microfluidic devices. Finally, 3D hydrogel scaffolds were fabricated by sequential temperature-dependent gelation followed by chemical cross-linking of the polymeric network of the hydrogel for added mechanical strength and stability. These 3D hydrogel scaffolds displayed pores, lamellae, globular nano-topography, tunable mechanical properties, high affinity for water, and cell proliferation and penetration properties. In conclusion, the large range of properties and characteristics of these materials provide a strong potential for a large variety of TERM applications, including cancer models, organoid growth, compatibility with bioprinting, or implantable devices., This work was supported by the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (Advance grant agreement ICoMICS No101018587), Spanish Ministry of Economy and Competitiveness Grant No PID2021-122409OB-C21, Spanish Ministry of Science and Innovation Grant No PID2020-113819RB-I00, and the Aragon Regional Government Grants No LMP 176_21 and E09_23R. E.G.-G. is funded by a Ramon and Cajal Fellowship (RYC2021-033490-I, funded by MCIN/AEI/10.13039/501100011033 and the EU “NextGenerationEU/PRTR”). P.A.-D. is funded by the Government of Aragon (Grant No 2018-22). S.P.-H. is funded by a Juan de la Cierva Fellowship (FJC2021-048044-I, funded by MCIN/AEI/10.13039/501100011033 and the EU “NextGenerationEU/PRTR”)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Quantitative characterization of the 3D self-organization of PDAC tumor spheroids reveals cell type and matrix dependence through advanced microscopy analysis

  • Hernández-Hatibi, Soraya
  • Borau, Carlos
  • Martínez-Bosch, Neus
  • Navarro Medrano, Pilar
  • García-Aznar, José M.
  • Guerrero, Pedro E.
Pancreatic ductal adenocarcinoma (PDAC) is characterized by an abundant tumor-associated stroma composed from pancreatic stellate cells, which play a critical role in tumor progression. Developing accurate in vitro models requires understanding the complex interactions between tumor cells and their microenvironment. In this study, we present a quantitative imaging-based characterization of the three dimensional (3D) self-organization of PDAC tumour spheroids using a microfluidic platform that mimics key aspects of the tumor microenvironment. Our model incorporates collagen type I hydrogels to recreate the extracellular matrix, activated human pancreatic stellate cells (HPSCs), and various tumor cell types. Advanced imaging techniques, including Lattice Lightsheet Microscopy, allowed us to analyze the 3D growth and spatial organization of the spheroids, revealing intricate biomechanical interactions. Our results indicate that alterations in matrix properties-such as stiffness, pore size, and hydraulic permeability-due to variations in collagen concentration significantly influence the growth patterns and organization of PDAC spheroids, depending on tumor subtype and epithelial-mesenchymal phenotype. Higher collagen concentrations promoted larger spheroids in epithelial-like cell lines, while mesenchymal-type cells required increased collagen for self-organization into smaller spheroids. Furthermore, coculture with HPSCs affected spheroid formation distinctly based on each PDAC cell line's genetic and phenotypic traits. HPSCs had opposing effects on epithelial-like cell lines: one cell line exhibited enhanced spheroid growth, while another showed inhibited formation, whereas mesenchymal-like spheroids showed minimal impact. These results provide insights into tumor-stroma interactions, emphasizing the importance of the cell-specific and matrix-dependent factors for advancing our understanding of PDAC progression and informing future therapeutic strategies., This work is part of the project PID2021-122409OB-C21 funded by MCINN/AEI/10.13039/501100011033/FEDER, UE. The authors would like to acknowledge the European Research Council (ERC) under the EU’s Horizon 2020 programme (ICoMICs, G.A.nr. 101018587) (J.M.G.A.), the MICINN/ Instituto de Salud Carlos III (ISCIII)-FEDER (Grant No. PI20/00625 and PI23/00591) (P.N.), the FJC2021-048046-I funded MCINN/AEI/ and the EU “NextGenerationEU”/PRTR” (P.E.G), and the pre-doctoral grants for the training of doctors funded by the MICINN (PRE2019- 090264) (S.H.H)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Novel hydrogel-based cancer-on-a-chip models for growth of 3D multi-cellular structures and investigation of early angiogenesis in pancreatic ductal adenocarcinoma

  • Pele, Karinna Georgiana
  • Calderón-Villalba, Alejandro
  • Amaveda, H.
  • Mora Alfonso, Mario
  • Zhang-Zhou, Jack
  • Pérez, María Ángeles
  • García-Aznar, José Manuel
  • Alamán-Díez, Pilar
  • García-Gareta, Elena
Cancer-on-a-chip models have enormous potential for the study of tumour development events. Here, we investigated hydrogels of egg white (EW) and gelatin for growth of 3D multi-cellular structures and investigation of early angiogenesis inside microfluidic devices. We focused on pancreatic ductal adenocarcinoma (PDAC), a devastating gastrointestinal malignancy. EW/gelatin hydrogels were stiffer and showed porous globular structures compared to the fibrous network of collagen I molecules. PANC-1 cells preferentially formed significantly larger spheroids in collagen I than in EW/gelatin hydrogels, whilst cell aggregates in the shape of grape-like clusters were significantly larger and more abundant in EW/gelatin. Cells inside the aggregates showed active cell unions, secreted matrix, and formed active unions with the surrounding EW/gelatin hydrogel. Early stages of PDAC were recreated by co-culture of two different microenvironments, one for PANC-1 and another one for fibroblasts, for investigating the secretion of soluble angiogenic factors, which depended on the role of each factor in the angiogenic and tumorigenic processes. Overall, cancer cell proliferation and establishment of a tumour vasculature were favoured. This study demonstrates the importance of the microenvironment in tumour cells behaviour as well as the complex interplay between the different cells present in PDAC to establish a tumoural vasculature., This work was supported by E.G-G’s “Ramon & Cajal Fellowship” (RYC2021–033490-I, funded by MCIN/AEI/10.13039/501100011033 and the EU "NextGenerationEU/PRTR"). Dual-beam FIB-SEM characterization was funded by ICTS ELECMI grants ELC217–2023 and ELC384–2024. Authors would like to acknowledge the Spanish Ministry of Economy and Competitiveness (PID2020–113819RB-I00, PID2021–122409OB-C21, and PID2021–125762NB-I00) and the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (ICoMICS grant agreement No 101018587). KG.P and J.Z-Z gratefully acknowledge the support of Aragon Institute of Engineering Research (I3A, Ayuda para practicas con TFM) and the Spanish Ministry of Education and Professional Formation (FPU21/06003), respectively. A.C-V gratefully acknowledges the Department of Science, University, and Knowledge Society of the Government of Aragon (predoctoral contract, Call No. 2023–27)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mutant calreticulin enables potent and selective CAR-T cell therapy in preclinical models of myeloproliferative neoplasms

  • Pesini, Cecilia
  • Gil Bellido, Mario
  • Millan, Lorena S.
  • Oñate, Carmen
  • Calvo Pérez, Adanays
  • Santiago, Llipsy
  • Iglesias, Eldris
  • Bernal, Jorge Paúl
  • Araujo-Voces, Miguel
  • Paz Artigas, Laura
  • García-Martínez, Laura
  • Roig, Francisco J.
  • Movilla, Nieves
  • García-Aznar, José Manuel
  • Olave, María Teresa
  • Azaceta, Gemma
  • Garrote, Marta
  • Alvarez-Larrán, A.
  • Gálvez Buerba, Eva Mª
  • Sánchez Martínez, Diego
  • Arias, Maykel
  • Pardo, Julián
  • Ramírez-Labrada, Ariel
6 figures., [Background] The adoptive transfer of T cells engineered to express chimeric antigen receptors (CAR-T) has shown high efficacy and safety in treating various hematologic malignancies. However, many hematologic disorders, such as BCR::ABL1-negative myeloproliferative neoplasms (MPNs), lack effective treatment options. Some of these neoplasms are marked by a recurrent mutation that results in the expression of mutant calreticulin (mCALR), a neoantigen absent in healthy tissues, making it a highly specific and appealing target for CAR-T cell therapy., [Methods] Five distinct CARs were designed based on available monoclonal antibody sequences that target mCALR and were subsequently used to generate CAR-T cells. The most effective construct was selected through functional in vitro assays against mCALR-positive cell lines. Its efficacy was then evaluated in cell lines, patient-derived cells, and orthotopic xenograft models, assessing tumor burden, CAR-T cell infiltration, and animal survival. Bulk and single-cell RNA sequencing were performed on patient-derived cells and residual tumor cells from CART-treated mice, respectively, to investigate potential resistance mechanisms. The impact of the most relevant pathway alteration on CAR-T efficacy was also analyzed. Pharmacological rescue assays using targeted agents were then conducted., [Results] Among the five constructs, one demonstrated superior and specific cytotoxicity against mCALR-expressing cells, with no activity against mCALR-negative controls. This CAR-T cell also eliminated patient-derived MPN cells and controlled disease progression in xenograft models, which correlated with the persistence of CAR-T cells and tumor infiltration. Transcriptomic profiling of patient samples and residual tumor cells in spleens of treated mice revealed upregulation of anti-apoptotic proteins. Functional assays confirmed reduced CAR-T efficacy in Bcl-2 high cells, which was restored by co-treatment with venetoclax, indicating a viable combination approach to overcome resistance., [Conclusions] This study demonstrates, for the first time, the successful targeting of mCALR with CAR-T cells as a therapeutic strategy for MPNs. The chosen construct shows strong preclinical efficacy against established cell lines and patient-derived cells. Additionally, transcriptomic profiling uncovered apoptosis resistance mechanisms and supports a combination strategy with BH3 mimetics, such as venetoclax. These findings provide a compelling rationale for ongoing preclinical development and future clinical application of anti-mCALR CAR-T cells for the treatment of MPNs., This work was funded by the Instituto de Salud Carlos III (ISCIII) through the Strategic Action in Health (AES), 2025 call, Health R&D Projects – Strategic Lines of Health Research (project/grant number: PI25/00236). AR-L is funded by a Ramón y Cajal contract (RYC2022-036627-I), financed by MCIN/AEI/10.13039/501100011033 and the European Social Fund (ESF) “Investing in your future” and ASPANOA. Grant PROY_B61_24 "proyectos de Investigación, desarrollo e innovación (I+D+i) en líneas prioritarias y de carácter multidisciplinar" funded by Gobierno de Aragón to AR-L and DSM. The Instituto de Salud Carlos III (ISCIII) through the Spanish Network of Advanced Therapies (RICORS/TERAV+), project RD24/0014/0015, and co-funded by the European Union (EU) to AR-L, JP, DSM and EMG. Work in the JP laboratory is funded by CIBERINFEC-ConsorcioCentro de Investigación Biomédica en Red- (CB21/13/00087), CERTERA andTERAV+ from Institutode Salud Carlos III, FEDER (Fondo Europeo de Desarrollo Regional),Gobierno deAragón (Group B29_23R, and LMP139_21), Grants PID2020-113963RBI00 andPID2024-157582OB-I00from MCIN/ AEI/10.13039/501100011033 and private social initiatives(FARO, AECC, Dona Médula, ASPANOA, and Carrera de la Mujer de Monzón No 101018587). Grant PID2022-136554OA-I00 funded by MICIU/AEI 10.13039/501100011033 and the European Regional Development Fund (ERDF)/EU to DSM. Predoctoral Grant for Ibero-Americas in Doctoral studies University of Zaragoza-Santander University (ACP), and Predoctoral Grant from AECC (CP). This work is part of a project that has received funding from the European Research Council (ICoMICS grant agreement No 101018587)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supplementary files of Mutant calreticulin enables potent and selective CAR-T cell therapy in preclinical models of myeloproliferative neoplasms [dataset]

  • Pesini, Cecilia
  • Gil Bellido, Mario
  • Millan, Lorena S.
  • Oñate, Carmen
  • Calvo Pérez, Adanays
  • Santiago, Llipsy
  • Iglesias, Eldris
  • Bernal, Jorge Paúl
  • Araujo-Voces, Miguel
  • Paz Artigas, Laura
  • García-Martínez, Laura
  • Roig, Francisco J.
  • Movilla, Nieves
  • García-Aznar, José Manuel
  • Olave, María Teresa
  • Azaceta, Gemma
  • Garrote, Marta
  • Alvarez-Larrán, A.
  • Gálvez Buerba, Eva Mª
  • Sánchez Martínez, Diego
  • Arias, Maykel
  • Pardo, Julián
  • Ramírez-Labrada, Ariel
Under a Creative Commons BY - NC 4.0 license.-- Material and methods: Cell lines culture, genetic modifications, and drug treatment. The MARIMO (Acute myeloid leukemia), HEL (Erythroleukaemia cells homozygous for JAK2 V617F mutation), K562 (Chronic myelogenous leukemia, BCR-Abl+), and THP-1 (Acute monocytic leukemia, JAK2 wt) cell lines were cultured in RPMI medium (Sigma-Aldrich). The Steffen Koschmieder laboratory kindly provided the MARIMO cell line after an MTA agreement with the Yuichi Ishikawa laboratory. HEK293T, A549, HepG2, PANC-1, PC-3, MDA-MB-231, and NHCF-v cell lines were cultured in DMEM (Sigma-Aldrich). Mediums were supplemented with 10% fetal bovine serum (FBS, Capricorn Scientific) and 1% penicillin/streptomycin (Pen/Strep, Sigma-Aldrich). HEL, K562, and THP-1 tumor cell lines were genetically modified to express ZsGreen-FireFly Luciferase (ZsGreen-FFLuc) and mutated calreticulin (mCALR) using lentiviral particles, obtained by co-transfecting HEK293T cells with the psPAX2 (Addgene #12260), the pMD2.G plasmids (Addgene #12259), and the lentiviral interest plasmid (pCCL1 Luc-T2A-ZsGreen and pCCL1 mCALR-T2A-RFP), by using PEI (Sigma-Aldrich). The mCALR sequence identified in the MARIMO cell line (del61), resembling a type 1-like mutation, was used to transduce HEL, K562, and THP-1 cell lines. All resulting cell lines expressed luciferase, ZsGreen (wt), and mCALR-expressing cells (mCALR+) co-expressed RFP protein. Fluorescence-activated cell sorting was used to isolate modified cell populations based on fluorescent protein expression, and mCALR expression was validated by flow cytometry and immunoblotting. Proliferation was evaluated between wild-type and mCAR+ derivative cell lines by Incucyte (Supplementary Figure 2). To knock out mCALR in MARIMO cells, a lentiviral CRISPR/Cas9 system was employed using the lentiCRISPRv2 (Addgene #52961) and lentiGuide-Puro (Addgene #52963) plasmids. A specific single guide RNA (sgRNA) targeting the mCALR was designed following the system requirements and cloned into the BsmBI site of the lentiCRISPRv2 vector following the protocol by Shalem et al. 1. The oligo sequences used were: (oligo 1: CACCGACGAGGAGCAGAGGATGATG, oligo 2:AAACCATCATCCTCTGCTCCTCGTC, Life Technologies). Loss of mutant CALR expression was confirmed by immunoblotting (see below). For venetoclax treatment, the IC50 was determined for each cell line, and a dose below the calculated IC50 was selected for subsequent experiments (Supplementary Figure 15). hiPSC differentiation into cardiomyocytes (hiPSC-CMs) Human induced pluripotent stem cells (hiPSCs; IPSC0028, Sigma-Aldrich) were differentiated into cardiomyocytes. Briefly, hiPSCs were seeded on Matrigel-coated plates (Corning) at a density of 1.5 × 10⁵ cells/cm² in Essential 8 (E8) medium (Gibco). After 48 h, differentiation was induced using RPMI medium (Biowest) supplemented with B27 minus insulin (Gibco) and 9 μM CHIR99021 (Sigma-Aldrich) for 24 h, followed by 48 h in RPMI B27⁻. The medium was then replaced with a 1:1 mixture of conditioned and fresh RPMI B27⁻ containing 5 μM IWP2 (Labclinics) for 48 h, and subsequently with fresh RPMI B27⁻ for an additional 48 h. Cultures were then maintained in RPMI supplemented with B27 plus insulin (RPMI B27⁺) for 72 h. Cardiomyocytes were purified by 48 h incubation in glucose-free RPMI B27⁺ medium (Gibco) and passaged using TrypLE (Gibco). Cells were reseeded on Matrigel-coated plates in RPMI B27⁺ supplemented with 10 μM Y-27632 (Stem Cell Technologies) and 10% KnockOut serum (Gibco). After 24 h, medium was replaced with RPMI B27⁺ containing 2 μM CHIR99021 (expansion medium), refreshed every 48–72 h. Cells were expanded for up to four passages before use. To monitor hiPSC-CM purity, cells were analyzed by flow cytometry after each passage using cardiac Troponin T (cTnT) as a marker. Cells were fixed with 2% paraformaldehyde for 15 min at 4 °C, permeabilized and blocked with 0.1% saponin (MilliporeSigma) and 10% donkey serum (Sigma-Aldrich), and stained with BV421-conjugated anti-cTnT antibody (clone 13-11, BD Biosciences, 1:200). Samples were washed with PBS and analyzed by flow cytometry. Differentiation batches with <80% cTnT⁺ cells were excluded from experiments. Selection of single-chain variable fragment (scFv) and CAR construct design The mutated calreticulin-specific single-chain variable fragments (scFvs) were derived from different previously described antibodies: mCALR-CAR0, from the 8B2-H6 antibody (WO 2016/087514); mCALR-CAR1, from the B3 antibody (WO 2020/175689 A1); mCALR-CAR2, from antibody clone 4; mCALR-CAR3, from antibody clone 74; and mCALR-CAR4, from antibody clone 132 (all from WO 2023/107994, Supplementary Figure 16). The construct included a human CD8 hinge, a human CD8 transmembrane domain, a human 4-1BB endodomain, and the ζ signaling endodomain of the T cell receptor complex (CD3ζ). Additionally, a T2A-enhanced green fluorescent protein (ZsGreen) sequence was incorporated. The construct was synthesized commercially (GenScript) and cloned into a pCCL1 lentiviral backbone. An identical lentiviral vector expressing ZsGreen alone was used as a control (mock) where indicated., Lentiviral Particle Production and T-cell Transduction, Activation, and Expansion To produce viral supernatant, HEK293T cells were co-transfected with the CAR-encoding pCCL1 lentiviral plasmid, the RRE and Rev plasmids, and a plasmid containing the sequence for the VSV-G envelope (kindly provided by Pablo Menéndez’s laboratory). Plasmid transfection was carried out using PEI for 5 hours. Viral supernatants were collected at 48 and 72 hours posttransfection and ultracentrifuged (26000 rpm, 2.5 hours at 4°C, Sorvall WX+, Thermo Scientific). The concentrated supernatant was then titrated in HEK293T cells to determine viral titer for consistent infections. PBMCs were isolated from blood samples of HDs or MPN patients using Ficoll Paque Plus (Merk) gradient centrifugation (PI24/276). Primary human T cells were cultured in RPMI 1640 supplemented with 10% heat-inactivated FBS and 100 U/mL penicillin/streptomycin at 37°C in a 5% CO₂ incubator. T cells were activated using plate-bound anti-CD3 (OKT3) and anti-CD28 (BD Biosciences). After 24 hours, human IL-7 and IL-15 (Miltenyi Biotec) were added at a final concentration of 10 ng/mL. The next day, T cells were seeded into a new plate and transduced with lentiviral CAR vectors at a multiplicity of infection of 30. Proper CAR cell generation was confirmed by eGFP expression and CAR surface expression through extracellular labeling of the scFv using a Biotin-AffiniPure F(ab’)2 Fragment Goat Anti-Mouse IgG (H+L) or Biotin- AffiniPure F(ab’)₂ Fragment Goat Anti-Human IgG (H+L) (Jackson ImmunoResearch Laboratories) followed by incubation with Streptavidin-PE (Miltenyi Biotech) and analyzed by flow cytometry. In Vitro Cytotoxicity Assays and Cytokine Release Determination T cells expressing different CAR-T constructs were co-cultured with target cells at the indicated E:T ratios for 24 to 48 hours to evaluate cytotoxicity. Wells containing only target cells served as controls for normalization. Comparisons were made between mCALR⁺ target cells co-cultured with CAR-transduced T cells and appropriate reference groups, depending on the experimental setup: against mCALR⁻ target cells co-cultured with CAR-T cells or against mCALR+ cells cocultured with non-transduced T cells. Experiments were conducted with a normalized CAR expression level of 35% to compare the different CAR constructs. Cytotoxicity was assessed using both Incucyte-based live-cell imaging and a luciferase-based viability assay. For the Incucyte assays, co-cultures were imaged every 6 hours for up to 48 hours using the Incucyte Live-Cell Analysis System (Sartorius). Red fluorescence intensity was used to quantify target cell survival. Viability was calculated as the percentage of the red fluorescence area relative to control wells at each time point, using the following formula: Viability (%) = (Orange fluorescence area of test wells at t / t₀) / (Orange fluorescence area of control wells at t / t₀) × 100, with analysis performed using Incucyte Analysis Software. In the luciferase-based assay, luciferase activity was measured at 24 and 48 hours post co-culture using D-luciferin (BioVision), and luminescence was recorded with a BioTek Microplate Reader (Agilent). Cell viability was calculated based on the percentage of luminescence relative to control wells using the formula: Viability (%) = (Luminescence of test wells / Luminescence of control wells) × 100. The production of the proinflammatory cytokine interferon-γ (IFN-γ) was measured in cytotoxicity assay supernatants using an enzyme-linked immunosorbent assay (ELISA) from BD Biosciences. Additionally, the multiplex immunoassay quantified TNFα, IL6, IL10, CXCL10, MIP1A/B, IL2, IL13, and IL5 using a customized multiplex immunoassay from R&D Systems, following the manufacturer’s instructions. Flow cytometry Samples were acquired using a MACSQuant® 10 Analyzer Flow Cytometer, a MACSQuant® VYB Flow Cytometer (Miltenyi Biotec), or a BD FACSDiscover™ S8 Cell Sorter (BD Biosciences). For surface staining, cells were resuspended in PBS containing 5% FCS and incubated with the appropriate antibody cocktails and Fcγ Block Reagent (BD Biosciences) for 30 minutes at 4 ºC in the dark. Cells were then washed twice with PBS plus 5% FCS. For intracellular staining, following surface staining, cells were fixed and permeabilized using the FoxP3 Transcription Factor Buffer Kit (Miltenyi Biotec) according to the manufacturer’s protocol, and then incubated with intracellular antibodies for 30 minutes at 4 ºC in the dark. The cell surface expression of mutated calreticulin was detected using an anti-human mutated calreticulin antibody (CAL2 clone, Dianova), followed by an Alexa Fluor-633 secondary antibody (ThermoFisher). All the antibodies used are presented in Supplementary Table 4. The immunophenotyping of healthy donor PBMCs, patient PBMCs, and CD34+ progenitor cells was analyzed using Kaluza Software (Beckman Coulter). The hCD3 phenotyping samples from mice were analyzed using FlowJo™ Software. First, dimensionality reduction was performed using t-SNE. Subsequently, the FlowSOM algorithm was applied to the t-SNE data to conduct unsupervised clustering, enabling the identification of distinct cellular subsets based on phenotypic profiles. Western blot analysis Whole-cell extracts were prepared by lysing cells for 15 min on ice in RIPA lysis buffer (Sigma-Aldrich) supplemented with protease and phosphatase cocktail inhibitors (Roche). Protein concentration in cell lysates was quantified by Bradford (BioRad) using a BioTek Microplate Reader. Cell culture supernatants were centrifuged using a 50 kDa Amicon filter (Sigma-Aldrich) to concentrate mCALR. Whole-cell lysates and cell culture supernatants were separated through SDS-polyacrylamide gels and transferred to a nitrocellulose membrane (BioRad). Membranes were blocked with 5% milk powder in 0.1% Tween 20 (Sigma-Aldrich) in PBS (PBS-T) for 1 h at RT, followed by incubation with primary antibodies diluted in 2.5% milk PBS-T. Western Blotting Luminol Reagent (Thermoscience) was used to detect protein expression with light-sensitive films (Phenix Research). The following antibodies were used: Anti-mCALR (1:500, Dianova), anti-Bcl-2 (1:250, SantaCruz), anti-Bcl-xL (1:1000, CellSignaling) and anti-GAPDH (1:1000, SantaCruz). Xenograft in vivo model. Nonobese diabetic B-NDG mice (female, 5-week-old, Inotiv) were housed in sterile facilities for immunosuppressed animals at the Center for Biomedical Research of Aragon (CIBA). Animal protocols were approved by the University of Zaragoza’s Advisory Ethics Commission for Animal Research (code PI48/23). Mice were IV transplanted with 3×105 Luc/ZsGreen–expressing HEL mCALR+ cells or MARIMO cell line. Two days later, 5×106 CART3-mCALR for eGFP-transfected (MOCK) T cells were i.v. infused. Tumour burden was followed by bioluminescence using the IVIS system (IVIS Lumina XRMS In Vivo Imaging System). To measure tumor burden, mice were injected intraperitoneally with 150 mg/kg of D-luciferin, and luminescence was monitored at the indicated time points. Signal intensity was quantified as total flux (photons/sec/cm²/sr) using Living Image software (PerkinElmer). Mice were regularly examined for weight loss, signs of stress, or the development of hind limb paralysis and euthanized according to preset criteria. Peripheral blood was collected weekly from the submandibular vein and samples were stained for flow cytometry to assess tumor burden (hCD33⁺GFP⁺/total cells) and the human T cells (hCD45⁺hCD3⁺/total cells) and CART3-mCALR cells (hCD45⁺ hCD3⁺ GFP⁺/total cells) persistence with total cells defined as the sum of hCD45⁺ and mCD45⁺ cells in each sample (Antibody information in supplementary Table 4). Red blood cells were lysed with ACK buffer (ThermoFisher). Similarly, spleen, blood, and bone marrow at euthanization were analysed by flow cytometry. Additionally, ex vivo bioluminescence imaging was performed on harvested mouse organs using the IVIS system. For survival analysis, animals were monitored daily and euthanized upon reaching predefined humane endpoints. CAR-treated mice were sacrificed seven days after the death of the last control animal, corresponding to approximately 25% longer survival, as established in the experimental design. At the time of euthanasia, spleen, liver, bone marrow, and tumor tissues were collected for the analysis of T-cell migration and tumor burden. In cases where a mouse in the CAR-treated group died before the planned endpoint, the euthanasia of the remaining mice was postponed by an equivalent period (25% of the control group survival) counted from the day of that death. RNA sequencing and data analysis. For bulk RNA-Seq analysis, patient-derived primary CD34+ cells were enriched, as previously indicated. Total RNA was extracted using TRIzol™ Reagent (Invitrogen). Briefly, samples were lysed in TRIzol, mixed with chloroform (PanReac), and centrifuged to separate phases. The aqueous phase was collected, RNA was precipitated with isopropanol (PanReac), washed with 75% ethanol, and resuspended in RNase-free water (Merk). Additional patient data is given in Supplemental Table 3. Total RNA sequencing was performed by CeGaT (Germany) using the WTS Classic service. Briefly, rRNA was depleted, total RNA was analyzed, libraries were prepared, and sequencing was conducted using Illumina sequencing platforms (Read length: 2 x 100 bp, Output: 6 M clusters (10 Gb) per sample). FASTQ files were preprocessed to filter by read length and sequence quality (minimum length of 50 bp) and to exclude reads with excessive ambiguous bases (>15% Ns). This filtering was performed using the Prinseq tool. Control samples correspond to SRR30220813–SRR30220816 from the SRP526030 study. Reads were mapped to the human reference genome (GRCh38.p14 primary assembly) using HISAT2 v2.2.1. Alignment files in SAM format were converted to BAM format using SAMtools v1.21 . Transcript assembly was performed with StringTie v2.2.2, using the GRCh38.113 GTF annotation file from Ensembl. Differential expression analysis was carried out using DESeq2, edgeR, and voom. For single-cell RNA sequencing, cryopreserved cell suspensions were thawed, washed, and resuspended in RPMI 1640 medium supplemented with 10% fetal calf serum (FCS), following the guidelines from 10x Genomics (CG000447—Handbook Cell Thawing Protocols for Singlecell Assays, Rev. B). Cell viability and counts were assessed using acridine range/propidium iodide staining and an automated cell counter (Cellaca MX, Cenibra GmbH, Germany). Singlecell suspensions were then loaded onto a Chromium GEM-X Single Cell 3′ chip (10xGenomics), targeting 20,000 cells per sample, and processed using the Chromium Controller with the GEM-X Universal 3′ Gene Expression v4 kit (10x Genomics) according to the manufacturer’s instructions. The resulting libraries were sequenced on a NovaSeq X Plus (Illumina) using a 25B flow cell, achieving an average depth of approximately 40,000 reads per cell. Sequencing data were demultiplexed and processed with Cell Ranger (v9.0.1) using the GRCh38-2024-A reference genome. 15,782 cells were recovered for sample 1 (MARIMO cell line used for infusion) and 13,051 cells for sample 2 (pooled spleen residual tumor cells), with median gene counts of 3,248 and 2,042 per cell, respectively. Filtered feature-barcode matrices were subsequently analyzed in Seurat (v5.1.0). Cells were retained if they expressed between 600 and 6,000 genes per cell and had less than 20% mitochondrial gene content. Batch correction was performed using SCTransform. After quality control and filtering, the final high-quality libraries contained 13,861 (sample 1) and 9,661 (sample 2) cells, each expressing more than 2,000 genes per cell. Principal component analysis (PCA) and Uniform Manifold Approximation and Projection (UMAP) were computed from the top 30 principal components. Clustering was performed using the Louvain algorithm at a resolution of 0.5, and transcriptional clusters were identified using the FindAllMarkers function in Seurat. Cluster annotation was based on the top-ranked marker genes, and gene module scores were computed using the AddModuleScore function. Comparisons between clusters of interest were conducted using the FindMarkers function in Seurat (Wilcoxon rank-sum tests with Bonferroni correction), with the parameters logfc.threshold = 0, min.pct = 0, and min.diff.pct = −Inf to retain all detected features. Filtered differential expression results were subsequently refined using in-house scripts, applying a minimum adjusted p-value of 0.05 and a minimum log₂ fold change of 0.5., Supplementary Table 1. Kinetic binding parameters and functional activity of anti-mCALR antibody clones, as reported in the respective patents; Supplementary Table 2. Clinical characteristics of patients included in cytotoxicity assays; Supplementary Table 3. Clinical characteristics of patients included in the RNA-seq analysis; Supplementary Table 4. List of antibodies.--, Supplementary Figure 1. Surface expression of CART3-mCALR by human scFv labelling detected by flow cytometry in primary T cells; Supplementary Figure 2. Proliferation of wildtype (WT) and mutated Calreticulin (CALR mut) K562, HEL and THP-1 cell lines using IncuCyte live-cell imaging by confluency analysis; Supplementary Figure 3. CART3-mCALR induces higher cytokine secretion levels compared to other constructs, as measured by Luminex of supernatant of a cytotoxicity at 4:1 E:T ratio against K562 cell line; Supplementary Figure 4. CAR-T cell cytotoxicity against cell lines expressing distinct mCALR variants; Supplementary Figure 5. Real-time cytotoxicity assay monitored by IncuCyte confluence analysis in mCALR-negative cell lines and mCALR-positive controls; Supplementary Figure 6. Cytotoxicity of anti-mCALR CAR-T cells against primary cardiomyocytes, cardiac fibroblasts, and PBMCs; Supplementary Figure 7; Supplementary Figure 8; Supplementary Figure 9; Supplementary Figure 10; Supplementary Figure 11; Supplementary Figure 12; Supplementary Figure 13; Supplementary Figure 14; Supplementary Figure 15; Supplementary Figure 16. Sequences of CARs constructs indicating the source patent for each sequence., This work was funded by the Instituto de Salud Carlos III (ISCIII) through the Strategic Action in Health (AES), 2025 call, Health R&D Projects – Strategic Lines of Health Research (project/grant number: PI25/00236). AR-L is funded by a Ramón y Cajal contract (RYC2022-036627-I), financed by MCIN/AEI/10.13039/501100011033 and the European Social Fund (ESF) “Investing in your future” and ASPANOA. Grant PROY_B61_24 "proyectos de Investigación, desarrollo e innovación (I+D+i) en líneas prioritarias y de carácter multidisciplinar" funded by Gobierno de Aragón to AR-L and DSM. The Instituto de Salud Carlos III (ISCIII) through the Spanish Network of Advanced Therapies (RICORS/TERAV+), project RD24/0014/0015, and co-funded by the European Union (EU) to AR-L, JP, DSM and EMG. Work in the JP laboratory is funded by CIBERINFEC-ConsorcioCentro de Investigación Biomédica en Red- (CB21/13/00087), CERTERA andTERAV+ from Institutode Salud Carlos III, FEDER (Fondo Europeo de Desarrollo Regional),Gobierno deAragón (Group B29_23R, and LMP139_21), Grants PID2020-113963RBI00 andPID2024-157582OB-I00from MCIN/ AEI/10.13039/501100011033 and private social initiatives(FARO, AECC, Dona Médula, ASPANOA, and Carrera de la Mujer de Monzón No 101018587). Grant PID2022-136554OA-I00 funded by MICIU/AEI 10.13039/501100011033 and the European Regional Development Fund (ERDF)/EU to DSM. Predoctoral Grant for Ibero-Americas in Doctoral studies University of Zaragoza-Santander University (ACP), and Predoctoral Grant from AECC (CP). This work is part of a project that has received funding from the European Research Council (ICoMICS grant agreement No 101018587).--, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Non-linear characterization of commercial and decellularized hydrogels: Statistical framework enhanced by bayesian optimization

  • García-García, D. E.
  • Marques, D.
  • Amaveda, Hippolyte
  • Mora Alfonso, Mario
  • Asín, Javier
  • Villaoslada, I.
  • Baptista, Pedro M.
  • Pérez, María Ángeles
  • García-Aznar, José Manuel
The data and code developed throughout this document will be made available on request., [Scope]: Hydrogels are widely used in the design of tissue substitutes because of their ability to mimic the extracellular matrix (ECM). Their mechanical cues critically influence the cellular response, making accurate characterization essential. However, it remains challenging due to their intricate nature. This study computationally evaluates the hyperelastic properties of next-generation hydrogels of high biomedical interest, including basal membrane extract and decellularized liver matrices, as well as structural proteins., [Methods]: We present a combined framework based on Bayesian optimization and statistical analyses that go beyond classical least-squares fitting, leveraging rheological experimental data. It defines each hyperelastic strain-energy density function, and addresses both intra- and inter-sample variability. This approach quantifies uncertainty and reveals the natural variability that deterministic models overlook, and it also enables quantification of coefficient variation with composition., [Results]: Validation against experimental data shows computational fits of 5% error in most cases, and low calculation time. Analyses reveal that composition-collagen addition, fibrin concentration, and decellularized extracellular matrix (dECM) age-modulate initial stiffness, nonlinearity, and overall mechanical resistance of the hydrogels., [Conclusion]: Hydrogels derived from basal membrane extracts exhibit comparable non-linear mechanics, while collagen addition reduces stiffness and nonlinearity. In fibrin-based hydrogels with decellularized liver matrix, mechanical behavior is concentration and age-dependent. Such insights are highly relevant for mechanobiology, enabling prediction of how cells sense mechanical cues and scaffold composition influences in vivo interactions., This work is part of a Project that has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 Research and Innovation Programme (ICoMICS GA No. 101018587). Authors would like to acknowledge the following projects funded by MICIU/AEI/10.13039/501100011033 and by PID2024-155384OB-C21 (JMGA), PID2023-150234NB-I00 (JA), and PID2023-146072OB-I00 (MAP); JA would like to acknowledge Gobierno de Aragón under Research Group E46_23 R: Modelos Estocásticos and JMGA and MAP T50_23R: M2BE. PMB would like to acknowledge the Funded Projects PI21/00667 received by ISCiii. DEGG Grant (PRE2024-UZ-19) is funded by MICIU/AEI/10.13039/501100011033 and by FSE+., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Reseña (Review)

Decellularization of tumours: A new frontier in tissue engineering

  • García Gareta, E.
  • Pérez, M. Á.
  • García Aznar, J. M.
Cancer is one of the leading causes of death worldwide. The tumour extracellular matrix (ECM) has unique features in terms of composition and mechanical properties, resulting in a structurally and chemically different ECM to that of native, healthy tissues. This paper reviews to date the efforts into decellularization of tumours, which in the authors’ view represents a new frontier in the ever evolving field of tumour tissue engineering. An overview of the ECM and its importance in cancer is given, ending with examples of research using decellularized tumours, which has already indicated potential therapeutic targets, unravelled malignancy mechanisms or response to chemotherapy agents. The review highlights that more research is needed in this area, which can answer important questions related to tumour formation and progression to ultimately identify new and effective therapeutic targets. Within the near-future of personalized medicine, this research can create patient-specific tumour models and therapeutic regimes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A Stiff Extracellular Matrix Favors the Mechanical Cell Competition that Leads to Extrusion of Bacterially-Infected Epithelial Cells

  • Aparicio-Yuste, Raúl
  • Muenkel, Marie
  • Clark, Andrew G.
  • Gómez-Benito, María J.
  • Bastounis, Effie E.
Cell competition refers to the mechanism whereby less fit cells (“losers”) are sensed and eliminated by more fit neighboring cells (“winners”) and arises during many processes including intracellular bacterial infection. Extracellular matrix (ECM) stiffness can regulate important cellular functions, such as motility, by modulating the physical forces that cells transduce and could thus modulate the output of cellular competitions. Herein, we employ a computational model to investigate the previously overlooked role of ECM stiffness in modulating the forceful extrusion of infected “loser” cells by uninfected “winner” cells. We find that increasing ECM stiffness promotes the collective squeezing and subsequent extrusion of infected cells due to differential cell displacements and cellular force generation. Moreover, we discover that an increase in the ratio of uninfected to infected cell stiffness as well as a smaller infection focus size, independently promote squeezing of infected cells, and this phenomenon is more prominent on stiffer compared to softer matrices. Our experimental findings validate the computational predictions by demonstrating increased collective cell extrusion on stiff matrices and glass as opposed to softer matrices, which is associated with decreased bacterial spread in the basal cell monolayer in vitro. Collectively, our results suggest that ECM stiffness plays a major role in modulating the competition between infected and uninfected cells, with stiffer matrices promoting this battle through differential modulation of cell mechanics between the two cell populations.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A mechanistic protrusive-based model for 3D cell migration

  • Merino Casallo, F.
  • Gómez Benito, M. J.
  • Martínez Cantín, R.
  • García Aznar, J. M.
Cell migration is essential for a variety of biological processes, such as embryogenesis, wound healing, and the immune response. After more than a century of research—mainly on flat surfaces—, there are still many unknowns about cell motility. In particular, regarding how cells migrate within 3D matrices, which more accurately replicate in vivo conditions. We present a novel in silico model of 3D mesenchymal cell migration regulated by the chemical and mechanical profile of the surrounding environment. This in silico model considers cell’s adhesive and nuclear phenotypes, the effects of the steric hindrance of the matrix, and cells ability to degradate the ECM. These factors are crucial when investigating the increasing difficulty that migrating cells find to squeeze their nuclei through dense matrices, which may act as physical barriers. Our results agree with previous in vitro observations where fibroblasts cultured in collagen-based hydrogels did not durotax toward regions with higher collagen concentrations. Instead, they exhibited an adurotactic behavior, following a more random trajectory. Overall, cell’s migratory response in 3D domains depends on its phenotype, and the properties of the surrounding environment, that is, 3D cell motion is strongly dependent on the context.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Borrelia burgdorferi modulates the physical forces and immunity signaling in endothelial cells

  • Aparicio Yuste, Raúl
  • Muenkel, Marie
  • Axarlis, Konstantinos
  • Gómez Benito, María J.
  • Reuss, Annalena
  • Blacker, Grace
  • Tal, Michal Caspi
  • Kraiczy, Peter
  • Bastounis, Effie E.
Borrelia burgdorferi (Bb), a vector-borne bacterial pathogen and the causative agent of Lyme disease, can spread to distant tissues in the human host by traveling in and through monolayers of endothelial cells (ECs) lining the vasculature. To examine whether Bb alters the physical forces of ECs to promote its dissemination, we exposed ECs to Bb and observed a sharp and transient increase in EC traction and intercellular forces, followed by a prolonged decrease in EC motility and physical forces. All variables returned to baseline at 24 h after exposure. RNA sequencing analysis revealed an upregulation of innate immune signaling pathways during early but not late Bb exposure. Exposure of ECs to heat-inactivated Bb recapitulated only the early weakening of EC mechanotransduction. The differential responses to live versus heat-inactivated Bb indicate a tight interplay between innate immune signaling and physical forces in host ECs and suggest their active modulation by Bb.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Computational modelling of the mechanical behaviour of protein-based hydrogels

  • Pérez-Benito, Ángela
  • Huerta-López, Carla
  • Alegre-Cebollada, Jorge
  • García-Aznar, José Manuel
  • Hervas-Raluy, Silvia
Protein-based hydrogels have been extensively studied in the field of biomaterials given their ability to mimic living tissues and their special resemblance to the extracellular matrix. Despite this, the methods used for the control of mechanical properties of hydrogels are very limited, focusing mainly on their elasticity, with an often unrealistic characterization of mechanical properties such as extensibility, stiffness and viscoelasticity. Being able to control these properties is essential for the development of new biomaterials, since it has been demonstrated that mechanical properties affect cell behaviour and biological processes. To better understand the mechanical behaviour of these biopolymers, a computational model is here developed to characterize the mechanical behaviour of two different protein-based hydrogels. Strain–stress tests and stress-relaxation tests are evaluated computationally and compared to the results obtained experimentally in a previous work. To achieve this goal the Finite Element Method is used, combining hyperelastic and viscoelastic models. Different hyperelastic constitutive models (Mooney–Rivlin, Neo-Hookean, first and third order Ogden, and Yeoh) are proposed to estimate the mechanical properties of the protein-based hydrogels by least-square fitting of the in-vitro uniaxial test results. Among these models, the first order Ogden model with a viscoelastic model defined in Prony parameters better reproduces the strain–stress response and the change of stiffness with strain observed in the in-vitro tests.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Hybrid computational models of multicellular tumour growth considering glucose metabolism

  • Gonçalves, Inês G.
  • García-Aznar, José Manuel
Cancer cells metabolize glucose through metabolic pathways that differ from those used by healthy and differentiated cells. In particular, tumours have been shown to consume more glucose than their healthy counterparts and to use anaerobic metabolic pathways, even under aerobic conditions. Nevertheless, scientists have still not been able to explain why cancer cells evolved to present an altered metabolism and what evolutionary advantage this might provide them. Experimental and computational models have been increasingly used in recent years to understand some of these biological questions. Multicellular tumour spheroids are effective experimental models as they replicate the initial stages of avascular solid tumour growth. Furthermore, these experiments generate data which can be used to calibrate and validate computational studies that aim to simulate tumour growth. Hybrid models are of particular relevance in this field of research because they model cells as individual agents while also incorporating continuum representations of the substances present in the surrounding microenvironment that may participate in intracellular metabolic networks as concentration or density distributions. Henceforth, in this review, we explore the potential of computational modelling to reveal the role of metabolic reprogramming in tumour growth.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Tumour growth: An approach to calibrate parameters of a multiphase porous media model based on in vitro observations of Neuroblastoma spheroid growth in a hydrogel microenvironment

  • Hervas-Raluy, Silvia
  • Wirthl, Barbara
  • Guerrero, Pedro E.
  • Robalo Rei, Gil
  • Nitzler, Jonas
  • Coronado, Esther
  • Font de Mora Sainz, Jaime
  • Schrefler, Bernhard A.
  • Gomez-Benito, Maria Jose
  • Garcia-Aznar, Jose Manuel
  • Wall, Wolfgang A.
To unravel processes that lead to the growth of solid tumours, it is necessary to link knowledge of cancer biology with the physical properties of the tumour and its interaction with the surrounding microenvironment. Our understanding of the underlying mechanisms is however still imprecise. We therefore developed computational physics-based models, which incorporate the interaction of the tumour with its surroundings based on the theory of porous media. However, the experimental validation of such models represents a challenge to its clinical use as a prognostic tool. This study combines a physics-based model with in vitro experiments based on microfluidic devices used to mimic a three-dimensional tumour microenvironment. By conducting a global sensitivity analysis, we identify the most influential input parameters and infer their posterior distribution based on Bayesian calibration. The resulting probability density is in agreement with the scattering of the experimental data and thus validates the proposed workflow. This study demonstrates the huge challenges associated with determining precise parameters with usually only limited data for such complex processes and models, but also demonstrates in general how to indirectly characterise the mechanical properties of neuroblastoma spheroids that cannot feasibly be measured experimentally.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Hydrocolloids of egg white and gelatin as a platform for hydrogel-based tissue engineering

  • Pele, Karinna Georgiana
  • Amaveda, Hippolyte
  • Mora, Mario
  • Marcuello, Carlos
  • Lostao, Anabel
  • Alamán-Díez, Pilar
  • Pérez-Huertas, Salvador
  • Pérez, María Ángeles
  • García-Aznar, José Manuel
  • García-Gareta, Elena
Innovative materials are needed to produce scaffolds for various tissue engineering and regenerative medicine (TERM) applications, including tissue models. Materials derived from natural sources that offer low production costs, easy availability, and high bioactivity are highly preferred. Chicken egg white (EW) is an overlooked protein-based material. Whilst its combination with the biopolymer gelatin has been investigated in the food technology industry, mixed hydrocolloids of EW and gelatin have not been reported in TERM. This paper investigates these hydrocolloids as a suitable platform for hydrogel-based tissue engineering, including 2D coating films, miniaturized 3D hydrogels in microfluidic devices, and 3D hydrogel scaffolds. Rheological assessment of the hydrocolloid solutions suggested that temperature and EW concentration can be used to fine-tune the viscosity of the ensuing gels. Fabricated thin 2D hydrocolloid films presented globular nano-topography and in vitro cell work showed that the mixed hydrocolloids had increased cell growth compared with EW films. Results showed that hydrocolloids of EW and gelatin can be used for creating a 3D hydrogel environment for cell studies inside microfluidic devices. Finally, 3D hydrogel scaffolds were fabricated by sequential temperature-dependent gelation followed by chemical cross-linking of the polymeric network of the hydrogel for added mechanical strength and stability. These 3D hydrogel scaffolds displayed pores, lamellae, globular nano-topography, tunable mechanical properties, high affinity for water, and cell proliferation and penetration properties. In conclusion, the large range of properties and characteristics of these materials provide a strong potential for a large variety of TERM applications, including cancer models, organoid growth, compatibility with bioprinting, or implantable devices.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Collagen-laponite nanoclay hydrogels for tumor spheroid growth

  • Alamán-Díez, P.
  • Borau, C.
  • Guerrero, P. E.
  • Amaveda, H.
  • Mora, M.
  • Fraile, J. M.
  • García-Gareta, E.
  • García-Aznar, J. M.
  • Pérez, M. Á.
The extracellular matrix (ECM) plays an important regulatory role in the development and progression of tumoral tissue. Its functions and properties are crucial in determining tumor cell behavior such as invasion, migration, and malignancy development. Our study explores the role of collagen type I in cancer development and spread using engineered tumor models like multicellular spheroids grown in collagen-based hydrogels to simulate early tumor formation. We employ microfluidic techniques to test the hypothesis that (i) adding Laponite nanoclay to collagen hydrogels modifies mechanical and rheological properties and (ii) changing the stiffness of the collagen microenvironment affects tumor spheroid growth. Our findings support our theories and suggest the use of ECM components and engineered tumor models in cancer research, offering a biocompatible and biomimetic method to tailor the mechanical properties of conventional collagen hydrogels.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Neurorosettes: a novel computational modelling framework to investigate the Homer-Wright rosette formation in neuroblastoma

  • Gonçalves, Inês G.
  • García-Aznar, Jose Manuel
Cancer deregulates the interactions between cells and their microenvironment, leading to disrupted architectures. Homer-Wright rosettes, observed in neuroblastoma, comprise radial arrangements of neurons surrounding a meshwork of fibres. Currently, scientists believe that the presence of Homer-Wright rosettes reflects aberrant neuronal differentiation. Nonetheless, additional understanding of how these structures develop is required since neither experimental nor computational research has characterised this mechanism properly. In this work, we propose a mechanics-based computational framework to investigate Homer-Wright rosette formation. Our model depicts neurons as a combination of spherical (cell bodies) and cylindrical (neurites) agents, and it includes proliferation, neuronal differentiation, and adhesion/repulsion dynamics between neurons. We implemented our framework as an open-source user-friendly Python package called neurorosettes that provides real-time rendering of simulation results, making it adequate for general researchers to test and visualize hypotheses of Homer-Wright rosette formation. Furthermore, we present three example use-cases to replicate the emergence of this rosette subtype and investigate how mechanical interactions between neurons and neuronal differentiation may regulate its architecture. Due to the spare amount of experimental data on the formation of these histological patterns, our applications serve primarily as preliminary examples of how our tool can be used and extended. Although our preliminary results show the relevance of mechanical interactions and poor neuronal differentiation to Homer-Wright rosette formation, these factors appear to only predict the initial stages of rosette formation. Overall, our tool can improve the theoretical knowledge on this process and drive the design of new experimental studies to validate model results.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Exploring the potential of Physics-Informed Neural Networks to extract vascularization data from DCE-MRI in the presence of diffusion

  • Sainz de Mena, D.
  • Pérez, M. A.
  • García-Aznar, J. M.
Dynamic contrast-enhanced magnetic resonance imaging (DCE-MRI) is widely used to assess tissue vascularization, particularly in oncological applications. However, the most widely used pharmacokinetic (PK) models do not account for contrast agent (CA) diffusion between neighboring voxels, which can limit the accuracy of the results, especially in cases of heterogeneous tumors. To address this issue, previous works have proposed algorithms that incorporate diffusion phenomena into the formulation. However, these algorithms often face convergence problems due to the ill-posed nature of the problem. In this work, we present a new approach to fitting DCE-MRI data that incorporates CA diffusion by using Physics-Informed Neural Networks (PINNs). PINNs can be trained to fit measured data obtained from DCE-MRI while ensuring the mass conservation equation from the PK model. We compare the performance of PINNs to previous algorithms on different 1D cases inspired by previous works from literature. Results show that PINNs retrieve vascularization parameters more accurately from diffusion-corrected tracer-kinetic models. Furthermore, we demonstrate the robustness of PINNs compared to other traditional algorithms when faced with noisy or incomplete data. Overall, our results suggest that PINNs can be a valuable tool for improving the accuracy of DCE-MRI data analysis, particularly in cases where CA diffusion plays a significant role.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Physico-chemical characterization of the tumour microenvironment of pancreatic ductal adenocarcinoma

  • García-Gareta, Elena
  • Calderón Villalba, Alejandro
  • Alamán-Díez, Pilar
  • Gracia Costa, Carlos
  • Guerrero, Pedro Enrique
  • Mur, Carlota
  • Rueda Flores, Ana
  • Olivera Jurjo, Nerea
  • Sancho, Patricia
  • Pérez, María Ángeles
  • García-Aznar, José Manuel
Pancreatic ductal adenocarcinoma (PDAC) is a highly aggressive lethal malignancy that accounts for more than 90% of pancreatic cancer diagnoses. Our research is focused on the physico-chemical properties of the tumour microenvironment (TME), including its tumoural extracellular matrix (tECM), as they may have an important impact on the success of cancer therapies. PDAC xenografts and their decellularized tECM offer a great material source for research in terms of biomimicry with the original human tumour. Our aim was to evaluate and quantify the physico-chemical properties of the PDAC TME. Both cellularized (native TME) and decellularized (tECM) patient-derived PDAC xenografts were analyzed. A factorial design of experiments identified an optimal combination of factors for effective xenograft decellularization. Our results provide a complete advance in our understanding of the PDAC TME and its corresponding stroma, showing that it presents an interconnected porous architecture with very low permeability and small pores due to the contractility of the cellular components. This fact provides a potential therapeutic strategy based on the therapeutic agent size.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

PhysiCOOL: A generalized framework for model Calibration and Optimization Of modeLing projects

  • Gonçalves, Ines G.
  • Hormuth, David A.
  • Prabhakaran
  • Sandhya
  • Phillips, Caleb M.
  • García-Aznar, José Manuel
In silico models of biological systems are usually very complex and rely on a large number of parameters describing physical and biological properties that require validation. As such, parameter space exploration is an essential component of computational model development to fully characterize and validate simulation results. Experimental data may also be used to constrain parameter space (or enable model calibration) to enhance the biological relevance of model parameters. One widely used computational platform in the mathematical biology community is PhysiCell, which provides a standardized approach to agent-based models of biological phenomena at different time and spatial scales. Nonetheless, one limitation of PhysiCell is the lack of a generalized approach for parameter space exploration and calibration that can be run without high-performance computing access. Here, we present PhysiCOOL, an open-source Python library tailored to create standardized calibration and optimization routines for PhysiCell models
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Mechanotherapy as an alternative for cancer treatment

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Polydopamine interfacial coating for stable Tumor-on-a-Chip models: application for Pancreatic Ductal Adenocarcinoma

  • Hernández-Hatibi, Soraya
  • Guerrero, Pedro Enrique
  • García-Aznar, José Manuel
  • García-Gareta, Elena
Addressing current challenges in solid tumor research requires advanced in vitro three-dimensional (3D) cellular models that replicate the inherently 3D architecture and microenvironment of tumor tissue, including the extracellular matrix (ECM). However, tumor cells exert mechanical forces that can disrupt the physical integrity of the matrix in long-term 3D culture. Therefore, it is necessary to find the optimal balance between cellular forces and the preservation of matrix integrity. This work proposes using polydopamine (PDA) coating for 3D microfluidic cultures of pancreatic cancer cells to overcome matrix adhesion challenges to sustain representative tumor 3D cultures. Using PDA’s distinctive adhesion and biocompatibility, our model uses type I collagen hydrogels seeded with different pancreatic cancer cell lines, prompting distinct levels of matrix deformation and contraction. Optimizing the PDA coating enhances the adhesion and stability of collagen hydrogels within microfluidic devices, achieving a balance between the disruptive forces of tumor cells on matrix integrity and the maintenance of long-term 3D cultures. The findings reveal how this tension appears to be a critical determinant in spheroid morphology and growth dynamics. Stable and prolonged 3D culture platforms are crucial for understanding solid tumor cell behavior, dynamics, and responses within a controlled microenvironment. This advancement ultimately offers a powerful tool for drug screening, personalized medicine, and wider cancer therapeutics strategies.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

An agent-based method to estimate 3D cell migration trajectories from 2D measurements: Quantifying and comparing T vs CAR-T 3D cell migration

  • Camacho-Gómez, Daniel
  • Movilla, Nieves
  • Borau, Carlos
  • Martín, Alejandro
  • Oñate Salafranca, Carmen
  • Pardo, Julián
  • Gómez-Benito, María José
  • García-Aznar, José Manuel
Background and objective: Immune cell migration is one of the key features that enable immune cells to find invading pathogens, control tissue damage, and eliminate primary developing tumors. Chimeric antigen receptor (CAR) T-cell therapy is a novel strategy in the battle against various cancers. It has been successful in treating hematological tumors, yet it still faces many challenges in the case of solid tumors. In this work, we evaluate the three-dimensional (3D) migration capacity of T and CAR-T cells within dense collagen-based hydrogels. Quantifying three-dimensional (3D) cell migration requires microscopy techniques that may not be readily accessible. Thus, we introduce a straightforward mathematical model designed to infer 3D trajectories of cells from two-dimensional (2D) cell trajectories. Methods: We develop a 3D agent-based model (ABM) that simulates the temporal changes in the direction of migration with an inverse transform sampling method. Then, we propose an optimization procedure to accurately orient cell migration over time to reproduce cell migration from 2D experimental cell trajectories. With this model, we simulate cell migration assays of T and CAR-T cells in microfluidic devices conducted under hydrogels with different concentrations of type I collagen and validate our 3D cell migration predictions with light-sheet microscopy. Results: Our findings indicate that CAR-T cell migration is more sensitive to collagen concentration increases than T cells, resulting in a more pronounced reduction in their invasiveness. Moreover, our computational model reveals significant differences in 3D movement patterns between T and CAR-T cells. T cells exhibit migratory behavior in 3D whereas that CAR-T cells predominantly move within the plane, with limited movement in the direction. However, upon the introduction of a CXCL12 chemical gradient, CAR-T cells present migration patterns that closely resemble those of T cells. Conclusions: This framework demonstrates that 2D projections of 3D trajectories may not accurately represent real migration patterns. Moreover, it offers a tool to estimate 3D migration patterns from 2D experimental data, which can be easily obtained with automatic quantification algorithms. This approach helps reduce the need for sophisticated and expensive microscopy equipment required in laboratories, as well as the computational burden involved in producing and analyzing 3D experimental data.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

CAR-T cells are more affected than T lymphocytes by mechanical constraints: A microfluidic-based approach

  • Zhang-Zhou, Jack
  • Movilla Meno, Nieves
  • Oñate Salafranca, Carmen
  • Gomez-Benito, Maria Jose
  • Guerrero, Pedro Enrique
  • Pardo Jimeno, Julian
  • García-Aznar, Jose Manuel
Aims: CAR-T cell therapy has attracted considerable attention in recent years owing to its well-known efficacy against haematopoietic malignancies. Nevertheless, this immunotherapy fails against solid tumours due to hostile conditions found in the tumour microenvironment. In this context, many relevant biochemical factors have been thoroughly studied, but crucial mechanical cues have been underestimated. Main methods: We developed an innovative approach using microfluidic devices, which recreate the biomechanical aspects of solid tumours. Using these platforms, we quantified immune cell migration (T and CAR-T cells) under different confinement conditions. Key findings: We found that both CAR-T cell and T cell velocities are affected by the biomechanical and chemical cues studied, which are closely related to those found in solid tumours. Under biochemical stimulus-free conditions, the velocity of T cells is independent of the width of the microchannel, whereas the velocity of CAR-T cells is greatly reduced in the highest confinement channels. When chemoattractants or tumour cells are added, immune cells display increased confined migration velocity. However, in the presence of immunosuppressive chemokines, T cells become slower, whereas CAR-T cells significantly increase their velocity via a chimeric cytokine receptor. Significance: Our approach contributes to a better understanding of immune cell migration and the influence of mechanical constraints, which will allow the testing of new ways to improve CAR-T cell trafficking into solid tumours. Therefore, our study revealed that the migratory behaviour of CAR-T cells differs from that of T cells under confined conditions and that biomechanical cues, such as cell deformability caused by confinement, can influence the correct infiltration of immune cells into solid tumours during the immune response.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Leveraging computational modeling to explore epithelial and endothelial cell monolayer mechanobiology

  • Keshavanarayana, Pradeep
  • Aparicio-Yuste, Raul
  • Spill, Fabian
  • Gómez-Benito, María José
  • Bastounis, Effie E.
Endothelial cells (ENCs) and epithelial cells (EPCs) form monolayers whose barrier function is critical for the maintenance of physiological processes and extremely sensitive to mechanical cues. Computational models have emerged as powerful tools to elucidate how mechanical cues impact the behavior of these monolayers in health and disease. Herein, the importance of mechanics in regulating ENC and EPC monolayer behavior is established, highlighting similarities and differences in various biological contexts. Concurrently, computational approaches and their importance in accelerating mechanobiology studies are discussed, emphasizing their limitations and suggesting future directions. The aim is to inspire further synergies between cell biologists and modelers, which are crucial for accelerating cell mechanobiology research.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Quantitative characterization of the 3D self-organization of PDAC tumor spheroids reveals cell type and matrix dependence through advanced microscopy analysis

  • Hernández-Hatibi, Soraya
  • Borau, Carlos
  • Martínez-Bosch, Neus
  • Navarro, Pilar
  • García-Aznar, José Manuel
  • Guerrero, Pedro Enrique
Pancreatic ductal adenocarcinoma (PDAC) is characterized by an abundant tumor-associated stroma composed from pancreatic stellate cells, which play a critical role in tumor progression. Developing accurate in vitro models requires understanding the complex interactions between tumor cells and their microenvironment. In this study, we present a quantitative imaging-based characterization of the three dimensional (3D) self-organization of PDAC tumour spheroids using a microfluidic platform that mimics key aspects of the tumor microenvironment. Our model incorporates collagen type I hydrogels to recreate the extracellular matrix, activated human pancreatic stellate cells (HPSCs), and various tumor cell types. Advanced imaging techniques, including Lattice Lightsheet Microscopy, allowed us to analyze the 3D growth and spatial organization of the spheroids, revealing intricate biomechanical interactions. Our results indicate that alterations in matrix properties—such as stiffness, pore size, and hydraulic permeability—due to variations in collagen concentration significantly influence the growth patterns and organization of PDAC spheroids, depending on tumor subtype and epithelial–mesenchymal phenotype. Higher collagen concentrations promoted larger spheroids in epithelial-like cell lines, while mesenchymal-type cells required increased collagen for self-organization into smaller spheroids. Furthermore, coculture with HPSCs affected spheroid formation distinctly based on each PDAC cell line's genetic and phenotypic traits. HPSCs had opposing effects on epithelial-like cell lines: one cell line exhibited enhanced spheroid growth, while another showed inhibited formation, whereas mesenchymal-like spheroids showed minimal impact. These results provide insights into tumor–stroma interactions, emphasizing the importance of the cell-specific and matrix-dependent factors for advancing our understanding of PDAC progression and informing future therapeutic strategies.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Novel hydrogel-based cancer-on-a-chip models for growth of 3D multi-cellular structures and investigation of early angiogenesis in pancreatic ductal adenocarcinoma

  • Pele, Karinna Georgiana
  • Calderón-Villalba, Alejandro
  • Amaveda, Hippolyte
  • Mora, Mario
  • Zhang-Zhou, Jack
  • Pérez, María Ángeles
  • García-Aznar, José Manuel
  • Alamán-Díez, Pilar
  • García-Gareta, Elena
Cancer-on-a-chip models have enormous potential for the study of tumour development events. Here, we investigated hydrogels of egg white (EW) and gelatin for growth of 3D multi-cellular structures and investigation of early angiogenesis inside microfluidic devices. We focused on pancreatic ductal adenocarcinoma (PDAC), a devastating gastrointestinal malignancy. EW/gelatin hydrogels were stiffer and showed porous globular structures compared to the fibrous network of collagen I molecules. PANC-1 cells preferentially formed significantly larger spheroids in collagen I than in EW/gelatin hydrogels, whilst cell aggregates in the shape of grape-like clusters were significantly larger and more abundant in EW/gelatin. Cells inside the aggregates showed active cell unions, secreted matrix, and formed active unions with the surrounding EW/gelatin hydrogel. Early stages of PDAC were recreated by co-culture of two different microenvironments, one for PANC-1 and another one for fibroblasts, for investigating the secretion of soluble angiogenic factors, which depended on the role of each factor in the angiogenic and tumorigenic processes. Overall, cancer cell proliferation and establishment of a tumour vasculature were favoured. This study demonstrates the importance of the microenvironment in tumour cells behaviour as well as the complex interplay between the different cells present in PDAC to establish a tumoural vasculature.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Physics-informed machine learning digital twin for reconstructing prostate cancer tumor growth via PSA tests

  • Camacho-Gomez, Daniel
  • Borau, Carlos
  • Garcia-Aznar, Jose Manuel
  • Gomez-Benito, Maria Jose
  • Girolami, Mark
  • Perez, Maria Angeles
Existing prostate cancer monitoring methods, reliant on prostate-specific antigen (PSA) measurements in blood tests often fail to detect tumor growth. We develop a computational framework to reconstruct tumor growth from the PSA integrating physics-based modeling and machine learning in digital twins. The physics-based model considers PSA secretion and flux from tissue to blood, depending on local vascularity. This model is enhanced by deep learning, which regulates tumor growth dynamics through the patient’s PSA blood tests and 3D spatial interactions of physiological variables of the digital twin. We showcase our framework by reconstructing tumor growth in real patients over 2.5 years from diagnosis, with tumor volume relative errors ranging from 0.8% to 12.28%. Additionally, our results reveal scenarios of tumor growth despite no significant rise in PSA levels. Therefore, our framework serves as a promising tool for prostate cancer monitoring, supporting the advancement of personalized monitoring protocols.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Leveraging agent-based models and deep reinforcement learning to predict taxis in cell migration

  • Camacho-Gomez, Daniel
  • Sentiero, Raffaele
  • Ventre, Maurizio
  • Garcia-Aznar, Jose Manuel
We present a novel computational framework that combines Agent-Based Modeling (ABM) with Reinforcement Learning (RL) using the Double Deep Q-Network (DDQN) algorithm to determine cellular behavior in response to environmental signals. With this approach, the model captures the transduction of environmental cues into biological responses directly from experimental observations, without explicitly predefining cell behavior. This enables the prediction of dynamic, environment-dependent cell behavior and offers a scalable and flexible alternative to traditional rule-based ABM. To illustrate its potential, we present an application to barotactic cell migration data from microfluidic device experiments, where cells adapt their migration behavior based on pressure gradients, demonstrating the model’s ability to generalize across varying geometries and pressure configurations. Thus, this approach introduces a novel direction for modeling how cells sense and transduce environmental cues into biological behaviors
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Mutant calreticulin enables potent and selective CAR-T cell therapy in preclinical models of myeloproliferative neoplasms

  • Pesini, Cecilia
  • Gil-Bellido, Mario
  • Millán, Lorena S.
  • Oñate, Carmen
  • Calvo-Pérez, Adanays
  • Santiago, Llipsy
  • Iglesias, Eldris
  • Bernal, Jorge Paúl
  • Araujo-Voces, Miguel
  • Paz Artigas, Laura
  • García-Martínez, Laura
  • Roig, Francisco J
  • Movilla Meno, Nieves
  • Garcia-Aznar, José Manuel
  • Menéndez-Jandula, Bárbara
  • Olave, María Teresa
  • Azaceta Reinares, Gemma
  • Garrote, Marta
  • Alvarez-Larrán, Alberto
  • Gálvez, Eva M
  • Sánchez Martínez, Diego
  • Arias, Maykel A
  • Pardo, Julian
  • Ramirez-Labrada, Ariel
Background The adoptive transfer of T cells engineered to express chimeric antigen receptors (CAR-T) has shown high efficacy and safety in treating various hematologic malignancies. However, many hematologic disorders, such as BCR::ABL1-negative myeloproliferative neoplasms (MPNs), lack effective treatment options. Some of these neoplasms are marked by a recurrent mutation that results in the expression of mutant calreticulin (mCALR), a neoantigen absent in healthy tissues, making it a highly specific and appealing target for CAR-T cell therapy. Methods Five distinct CARs were designed based on available monoclonal antibody sequences that target mCALR and were subsequently used to generate CAR-T cells. The most effective construct was selected through functional in vitro assays against mCALR-positive cell lines. Its efficacy was then evaluated in cell lines, patient-derived cells, and orthotopic xenograft models, assessing tumor burden, CAR-T cell infiltration, and animal survival. Bulk and single-cell RNA sequencing were performed on patient-derived cells and residual tumor cells from CART-treated mice, respectively, to investigate potential resistance mechanisms. The impact of the most relevant pathway alteration on CAR-T efficacy was also analyzed. Pharmacological rescue assays using targeted agents were then conducted. Results Among the five constructs, one demonstrated superior and specific cytotoxicity against mCALR-expressing cells, with no activity against mCALR-negative controls. This CAR-T cell also eliminated patient-derived MPN cells and controlled disease progression in xenograft models, which correlated with the persistence of CAR-T cells and tumor infiltration. Transcriptomic profiling of patient samples and residual tumor cells in spleens of treated mice revealed upregulation of anti-apoptotic proteins. Functional assays confirmed reduced CAR-T efficacy in Bcl-2 high cells, which was restored by co-treatment with venetoclax, indicating a viable combination approach to overcome resistance. Conclusions This study demonstrates, for the first time, the successful targeting of mCALR with CAR-T cells as a therapeutic strategy for MPNs. The chosen construct shows strong preclinical efficacy against established cell lines and patient-derived cells. Additionally, transcriptomic profiling uncovered apoptosis resistance mechanisms and supports a combination strategy with BH3 mimetics, such as venetoclax. These findings provide a compelling rationale for ongoing preclinical development and future clinical application of anti-mCALR CAR-T cells for the treatment of MPNs.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Local mechanobiological disruption in solid tumor-driven vascular permeability: A competition between mechanical vs chemical stimuli

  • Martín-Contreras, Alejandro
  • Sarasquete-Martínez, María
  • García-Aznar, José Manuel
  • González-Loyola, Alejandra
  • Gómez-Benito, María José
The tumor microenvironment imposes complex biochemical and biomechanical constraints on microvasculature, contributing to aberrant tumor blood vessels, characterized by abnormal endothelial proliferation, disrupted cell-to-cell junctions and increased permeability. While vascular normalization strategies have traditionally focused on biochemical modulation, the role of mechanical forces in endothelial dysfunction remains unclear. Here, we used a microfluidic platform to dissect the mechanobiological impact of two distinct solid tumor models —pancreatic ductal adenocarcinoma (PANC-1) and lung adenocarcinoma (A549)—on three-dimensional embedded endothelial vessels. Our findings reveal that PANC-1 spheroids exert significant mechanical forces, expanding vessel diameter and disrupting endothelial barrier integrity via cellular contractility. Conversely, A549 spheroids contribute to vascular destabilization through biochemical modulation, primarily via extracellular matrix degradation and inflammatory secretomes, leading to an altered and heterogeneous endothelial permeability. Proteomic analysis of both tumor cell lines highlights distinct pathways involved in endothelial remodeling: cytoskeletal alterations and consequent stresses in pancreatic ductal adenocarcinoma, while extracellular matrix remodeling and pro-inflammatory microenvironment are found in lung adenocarcinoma. These insights underscore the necessity of tumor-specific vascular normalization strategies, combining mechanobiological and biochemical approaches to restore endothelial barrier function. Our locally controlled microfluidic approach provides a versatile platform for evaluating innovative therapeutic strategies targeting tumor-specific vasculature. Statement of significance This study highlights the often-overlooked role of tumor-derived mechanical forces in vascular dysfunction. Within the tumor microenvironment, different tumor types disrupt the endothelial barrier through distinct, tumor-specific mechanisms, leading to varied patterns of vessel instability. Using confocal microscopy, we achieved spatially resolved analysis of local endothelial barrier damage, distinguishing focal from diffuse permeability changes. A 3D microfluidic platform was developed to replicate tumor endothelium interactions, combining live imaging, morphometric and biochemical assays, and proteomic profiling. This integrative model offers a versatile tool for evaluating drug responses under controlled mechanochemical conditions, supporting the development of personalized vascular-targeted therapies.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Elevated interstitial fluid pressure promotes spheroid growth and reduces CAR-T therapeutic efficacy in solid tumors

  • Alamán-Díez, Pilar
  • Ferrer-Royo, Silvia
  • Oñate Salafranca, Carmen
  • Martín Compaired, Pablo
  • Balsas, Patricia
  • Pardo, Julián
  • García-Aznar, José Manuel
  • González-Loyola, Alejandra
Pancreatic ductal adenocarcinoma (PDAC) is among the deadliest solid tumors and is characterized by aggressive progression, a dense tumor microenvironment (TME), and resistance to conventional therapies. Among the barriers to effective treatments, the presence of elevated interstitial fluid pressure (IFP) may be important for drug penetration and immune cell infiltration. In this work, we present an innovative 3D microfluidic PDAC-on-a-chip that allows the application of IFP in a cell chamber to simulate the TME and evaluate the therapeutic efficacy of CAR-T cells engineered against the receptor EGFR expressed in tumor cells. Elevated IFP was associated with increased tumor spheroid growth, reduced caspase activation and decreased actin remodeling, indicating enhanced tumor resistance. CAR-T cells effectively targeted and eliminated tumor cells in 2D and 3D coculture models under normal pressure conditions. However, under high IFP, CAR-Tmediated cytotoxicity was impaired, indicating that some of the low efficacy of CAR-T cell therapy against solid tumors might be derived from IFP. These results highlight the importance of the mechanoenvironment in limiting the efficacy of current immunotherapies. Our model, which incorporates an IFP component, serves as a realistic preclinical platform for testing antitumor therapies in solid tumors. Statement of Significance: In this work, we present an innovative 3D pancreatic tumor-on-a-chip model that incorporates interstitial fluid pressure (IFP), which is a key mechanical component of solid tumors. Using this platform, we discovered that IFP enhances tumor proliferation whilst diminishing immunotherapy efficacy. This indicates the important role of mechanical pressure in limiting immune cell function in solid tumors. Our model is a valuable preclinical platform for investigating the efficacy of anti-tumor therapies and supports the development of strategies to overcome mechanical resistance and enhance therapy efficacy in solid tumors, such as pancreatic cancer.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Matrix-integrated microfluidic tumor models for evaluating drug delivery systems and pre-clinical testing

  • Guerrero-López, Paula
  • Alamán-Díez, Pilar
  • Hernández-Hatibi, Soraya
  • Balsas, Patricia
  • García-Aznar, José Manuel
Drug delivery research strongly depends on experimental models that faithfully mimic the tumor microenvironment (TME) and its barriers to evaluate therapeutic efficacy. Conventional systems provide valuable insights but suffer from some limitations in physiological relevance, reproducibility, scalability or translational predictability. In this context, microfluidic ‘tumor-on-chip’ platforms have emerged as innovative tools that integrate engineering technology to model biological complexity, offering controlled microenvironments to investigate drug penetration, transport dynamics, and therapeutic response. A distinctive aspect of these microsystems is the possibility of incorporating matrices that mimic the extracellular matrix (ECM) of different tissues. These matrices enhance the ability of the in vitro models to replicate the structural, biochemical, and mechanical features of solid tumors. In this review, we focus on the application of microfluidic matrix-integrated tumor-on-chip platforms for drug delivery evaluation. We first outline key microenvironmental features that regulate therapeutic efficacy and discuss how they can be engineered within microfluidic models. We then examine how transport dynamics and delivery mechanisms are modeled under physiologically relevant conditions and review the use of these platforms to assess a broad range of therapeutic strategies, including nanocarriers, biologics, and gene- and cell-based therapies. Finally, we highlight emerging computational and data-driven approaches, together with current translational and regulatory perspectives, that position matrix-integrated tumor-on-chip technologies as powerful preclinical tools. These models aim to bridge the gap between simplified in vitro assays and more complex in vivo studies, ultimately accelerating the translation of drug delivery systems into clinical practice and paving the way for more personalized therapeutic strategies.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Ultrastructural study of microphysiological systems of the tumor microenvironment

  • Guerrero-López, Paula
  • Pele, Karinna Georgiana
  • Barrado, Mariano
  • Alamán-Díez, Pilar
  • García-Aznar, José Manuel
  • García-Gareta, Elena
The importance of studying the ultrastructure is underwritten by decades of research. Ultrastructural features help to understand pathological processes or inform disease diagnosis. However, ultrastructural studies in the promising cancer‐on‐a‐chip models are practically nonexistent because of the complexity of sample preparation for electron microscopy techniques, which is particularly aggravated with these miniaturized models. Our aim was to study ultrastructural features of microphysiological systems (MPS) of the tumor microenvironment consisting of 3D multicellular tumor structures that were grown in hydrogel‐based cancer‐on‐a‐chip models. To this end, we selected two different MPS from our lab as examples and devised a sample preparation technique for their observation under dual‐beam focused ion beam scanning electron microscopy (FIB‐SEM) and transmission electron microscopy (TEM). The proposed methodology allowed high‐resolution visualization of both external and internal organization of 3D multicellular tumor structures, including cell–matrix interactions, cell–cell junctions, spheroid–spheroid contacts, matrix deposition, and extracellular vesicle‐mediated intercellular communication. This study demonstrates the feasibility of using advanced electron microscopy techniques to observe ultrastructural features of miniaturized cancer models, thus revealing a new dimension in the use of these models to study tumor processes and find new therapeutic targets.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A 3D parametric model of the endothelial monolayer to predict its barrier integrity: Influence of mechanical and geometric conditions

  • Paseta, O.
  • García-Aznar, J.M.
  • Gómez-Benito, M.J.
Background and objective The endothelium, which consists on a monolayer of endothelial cells, lines the interior surface of blood vessels. These cells form a dynamic structure in which adhesions between them are constantly breaking down and rebuilding. This process creates gaps in the endothelium through which various substances and different cell types (including cancer cells) can intra/extravasate. It is known that mechanical and geometrical factors, such as the stiffness of the extracellular matrix surrounding the endothelial monolayer and its curvature, influence gap formation in the endothelium, thereby regulating its barrier integrity. This study uses finite element simulation based on a parametric model to investigate the regulatory role of these factors on gap opening in the endothelial monolayer. Methods We developed a parametric geometry model that enables the rapid generation of an endothelial monolayer and its surrounding extracellular matrix. We studied the intercellular stresses and gap formation on the monolayer for different matrix stiffnesses and vessel diameters using this geometry and finite element simulations. Results Our simulations indicate that stiffer extracellular matrices are associated with higher intercellular stresses and a greater percentage of gaps in the monolayer, regardless of substrate shape or vessel diameter. At a constant substrate stiffness, both intercellular stresses and gap formation increase as the vessel diameter decreases. Conclusions Our findings suggest that matrix stiffness and vessel curvature synergistically impair endothelial barrier integrity. Specifically, the combination of high substrate stiffness and reduced vessel diameter significantly increases the susceptibility to monolayer gap formation.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Non-linear Characterization of Commercial and Decellularized Hydrogels: Statistical Framework Enhanced by Bayesian Optimization

  • García-García, D. E.
  • Marques, D.
  • Amaveda, H.
  • Mora, M.
  • Asín, J.
  • Villaoslada, I.
  • Baptista, P. M.
  • Pérez, M. A.
  • García-Aznar, J. M.
Scope Hydrogels are widely used in the design of tissue substitutes because of their ability to mimic the extracellular matrix (ECM). Their mechanical cues critically influence the cellular response, making accurate characterization essential. However, it remains challenging due to their intricate nature. This study computationally evaluates the hyperelastic properties of next-generation hydrogels of high biomedical interest, including basal membrane extract and decellularized liver matrices, as well as structural proteins. Methods We present a combined framework based on Bayesian optimization and statistical analyses that go beyond classical least-squares fitting, leveraging rheological experimental data. It defines each hyperelastic strain-energy density function, and addresses both intra- and inter-sample variability. This approach quantifies uncertainty and reveals the natural variability that deterministic models overlook, and it also enables quantification of coefficient variation with composition. Results Validation against experimental data shows computational fits of 5% error in most cases, and low calculation time. Analyses reveal that composition—collagen addition, fibrin concentration, and decellularized extracellular matrix (dECM) age—modulate initial stiffness, nonlinearity, and overall mechanical resistance of the hydrogels. Conclusion Hydrogels derived from basal membrane extracts exhibit comparable non-linear mechanics, while collagen addition reduces stiffness and nonlinearity. In fibrin-based hydrogels with decellularized liver matrix, mechanical behavior is concentration and age-dependent. Such insights are highly relevant for mechanobiology, enabling prediction of how cells sense mechanical cues and scaffold composition influences in vivo interactions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Glucose and Oxygen Availability Shape Growth and Architecture of Tumor Spheroids in a Microfluidic 3D Model

  • Guerrero-López, Paula
  • Garcia-Aznar, José Manuel
Glucose and oxygen availability are fundamental drivers of tumor progression, deeply influencing cancer cell proliferation, metabolism, and spatial organization. In this study, we present a simplified microfluidic-based 3D model of tumorigenesis that allows for controlled and dynamic analysis of key tumor parameters under metabolic stress. Using this platform, lung adenocarcinoma (A549) spheroids embedded in a collagen-based extracellular matrix were monitored over time to assess growth kinetics, hypoxic response via HIF-1α expression, and structural organization. A multifactorial experimental design combining variations in glucose, glutamine, and oxygen availability revealed distinct and specific effects of each nutrient. Glutamine deprivation led to widespread cell death, while glucose limitation strongly arrests cell proliferation. Finally, oxygen restriction disrupted spheroid architecture, resulting in loss of the proliferative outer capsule and the formation of internal cavities. Our approach provides a flexible system to study how microenvironmental cues shape tumor behavior, offering insights into metabolic vulnerabilities and the morphofunctional consequences of nutrient stress in cancer.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Quantitative characterization of the 3D self-organization of PDAC tumor spheroids reveals cell type and matrix dependence through advanced microscopy analysis

  • Hernández-Hatibi, Soraya
  • Borau, Carlos
  • Martínez Bosch, Neus
  • Navarro, Pilar
  • García-Aznar, José Manuel
  • Guerrero, Pedro E.
Pancreatic ductal adenocarcinoma (PDAC) is characterized by an abundant tumor-associated stroma composed from pancreatic stellate cells, which play a critical role in tumor progression. Developing accurate in vitro models requires understanding the complex interactions between tumor cells and their microenvironment. In this study, we present a quantitative imaging-based characterization of the three dimensional (3D) self-organization of PDAC tumour spheroids using a microfluidic platform that mimics key aspects of the tumor microenvironment. Our model incorporates collagen type I hydrogels to recreate the extracellular matrix, activated human pancreatic stellate cells (HPSCs), and various tumor cell types. Advanced imaging techniques, including Lattice Lightsheet Microscopy, allowed us to analyze the 3D growth and spatial organization of the spheroids, revealing intricate biomechanical interactions. Our results indicate that alterations in matrix properties-such as stiffness, pore size, and hydraulic permeability-due to variations in collagen concentration significantly influence the growth patterns and organization of PDAC spheroids, depending on tumor subtype and epithelial-mesenchymal phenotype. Higher collagen concentrations promoted larger spheroids in epithelial-like cell lines, while mesenchymal-type cells required increased collagen for self-organization into smaller spheroids. Furthermore, coculture with HPSCs affected spheroid formation distinctly based on each PDAC cell line's genetic and phenotypic traits. HPSCs had opposing effects on epithelial-like cell lines: one cell line exhibited enhanced spheroid growth, while another showed inhibited formation, whereas mesenchymal-like spheroids showed minimal impact. These results provide insights into tumor-stroma interactions, emphasizing the importance of the cell-specific and matrix-dependent factors for advancing our understanding of PDAC progression and informing future therapeutic strategies., This work is part of the project PID2021-122409OB-C21 funded by MCINN/AEI/10.13039/501100011033/FEDER, UE. The authors would like to acknowledge the European Research Council (ERC) under the EU's Horizon 2020 programme (ICoMICs, G.A.nr. 101018587) (J.M.G.A.), the MICINN/ Instituto de Salud Carlos III (ISCIII)-FEDER (Grant No. PI20/00625 and PI23/00591) (P.N.), the FJC2021-048046-I funded MCINN/AEI/ and the EU "NextGenerationEU"/PRTR" (P.E.G), and the pre-doctoral grants for the training of doctors funded by the MICINN (PRE2019-090264) (S.H.H).