Pasar al contenido principal

Application-specific tissue engineering strategies for regeneration of tissue after physical trauma

RYC2021-033490-I

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Desarrollar, Atraer y Retener Talento
Subprograma Subprograma Estatal de Incorporación
Convocatoria Ramón y Cajal
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ZARAGOZA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 15
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Collagen-laponite nanoclay hydrogels for tumor spheroid growth

  • Alamán-Díez, Pilar
  • Borau, Carlos
  • Guerrero, Pedro Enrique
  • Amaveda, H.
  • Mora Alfonso, Mario
  • Fraile, José M.
  • García-Gareta, Elena
  • García-Aznar, José Manuel
  • Pérez, María Ángeles
The extracellular matrix (ECM) plays an important regulatory role in the development and progression of tumoral tissue. Its functions and properties are crucial in determining tumor cell behavior such as invasion, migration, and malignancy development. Our study explores the role of collagen type I in cancer development and spread using engineered tumor models like multicellular spheroids grown in collagen-based hydrogels to simulate early tumor formation. We employ microfluidic techniques to test the hypothesis that (i) adding Laponite nanoclay to collagen hydrogels modifies mechanical and rheological properties and (ii) changing the stiffness of the collagen microenvironment affects tumor spheroid growth. Our findings support our theories and suggest the use of ECM components and engineered tumor models in cancer research, offering a biocompatible and biomimetic method to tailor the mechanical properties of conventional collagen hydrogels., Authors would like to acknowledge the Spanish Ministry of Economy and Competitiveness through Projects: PID2020-113819RB-I00, PID2021-122409OB-C21, and PID2021-125762NB-I00. This work has also received founding from a Horizon 2020─RIA project (Topic SC1-DTH-07-2018, PRIMAGE grant agreement no: 826494), and the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (ICoMICS grant agreement No 101018587). PAD gratefully acknowledges the support of the Government of Aragon (Grant No 2018-22). EGG is funded by a Ramon & Cajal Fellowship (RYC2021-033490-I, funded by MCIN/AEI/10.13039/501100011033 and the EU“Next GenerationEU/PRTR”)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hydrocolloids of egg white and gelatin as a platform for hydrogel-based tissue engineering

  • Pele, Karinna Georgiana
  • Amaveda, H.
  • Mora Alfonso, Mario
  • Marcuello, Carlos
  • Lostao, Anabel
  • Alamán-Díez, Pilar
  • Pérez-Huertas, Salvador
  • Pérez, María Ángeles
  • García-Aznar, José Manuel
  • García-Gareta, Elena
This article belongs to the Special Issue Hydrogel-Based Scaffolds with a Focus on Medical Use., Innovative materials are needed to produce scaffolds for various tissue engineering and regenerative medicine (TERM) applications, including tissue models. Materials derived from natural sources that offer low production costs, easy availability, and high bioactivity are highly preferred. Chicken egg white (EW) is an overlooked protein-based material. Whilst its combination with the biopolymer gelatin has been investigated in the food technology industry, mixed hydrocolloids of EW and gelatin have not been reported in TERM. This paper investigates these hydrocolloids as a suitable platform for hydrogel-based tissue engineering, including 2D coating films, miniaturized 3D hydrogels in microfluidic devices, and 3D hydrogel scaffolds. Rheological assessment of the hydrocolloid solutions suggested that temperature and EW concentration can be used to fine-tune the viscosity of the ensuing gels. Fabricated thin 2D hydrocolloid films presented globular nano-topography and in vitro cell work showed that the mixed hydrocolloids had increased cell growth compared with EW films. Results showed that hydrocolloids of EW and gelatin can be used for creating a 3D hydrogel environment for cell studies inside microfluidic devices. Finally, 3D hydrogel scaffolds were fabricated by sequential temperature-dependent gelation followed by chemical cross-linking of the polymeric network of the hydrogel for added mechanical strength and stability. These 3D hydrogel scaffolds displayed pores, lamellae, globular nano-topography, tunable mechanical properties, high affinity for water, and cell proliferation and penetration properties. In conclusion, the large range of properties and characteristics of these materials provide a strong potential for a large variety of TERM applications, including cancer models, organoid growth, compatibility with bioprinting, or implantable devices., This work was supported by the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (Advance grant agreement ICoMICS No101018587), Spanish Ministry of Economy and Competitiveness Grant No PID2021-122409OB-C21, Spanish Ministry of Science and Innovation Grant No PID2020-113819RB-I00, and the Aragon Regional Government Grants No LMP 176_21 and E09_23R. E.G.-G. is funded by a Ramon and Cajal Fellowship (RYC2021-033490-I, funded by MCIN/AEI/10.13039/501100011033 and the EU “NextGenerationEU/PRTR”). P.A.-D. is funded by the Government of Aragon (Grant No 2018-22). S.P.-H. is funded by a Juan de la Cierva Fellowship (FJC2021-048044-I, funded by MCIN/AEI/10.13039/501100011033 and the EU “NextGenerationEU/PRTR”)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Novel hydrogel-based cancer-on-a-chip models for growth of 3D multi-cellular structures and investigation of early angiogenesis in pancreatic ductal adenocarcinoma

  • Pele, Karinna Georgiana
  • Calderón-Villalba, Alejandro
  • Amaveda, H.
  • Mora Alfonso, Mario
  • Zhang-Zhou, Jack
  • Pérez, María Ángeles
  • García-Aznar, José Manuel
  • Alamán-Díez, Pilar
  • García-Gareta, Elena
Cancer-on-a-chip models have enormous potential for the study of tumour development events. Here, we investigated hydrogels of egg white (EW) and gelatin for growth of 3D multi-cellular structures and investigation of early angiogenesis inside microfluidic devices. We focused on pancreatic ductal adenocarcinoma (PDAC), a devastating gastrointestinal malignancy. EW/gelatin hydrogels were stiffer and showed porous globular structures compared to the fibrous network of collagen I molecules. PANC-1 cells preferentially formed significantly larger spheroids in collagen I than in EW/gelatin hydrogels, whilst cell aggregates in the shape of grape-like clusters were significantly larger and more abundant in EW/gelatin. Cells inside the aggregates showed active cell unions, secreted matrix, and formed active unions with the surrounding EW/gelatin hydrogel. Early stages of PDAC were recreated by co-culture of two different microenvironments, one for PANC-1 and another one for fibroblasts, for investigating the secretion of soluble angiogenic factors, which depended on the role of each factor in the angiogenic and tumorigenic processes. Overall, cancer cell proliferation and establishment of a tumour vasculature were favoured. This study demonstrates the importance of the microenvironment in tumour cells behaviour as well as the complex interplay between the different cells present in PDAC to establish a tumoural vasculature., This work was supported by E.G-G’s “Ramon & Cajal Fellowship” (RYC2021–033490-I, funded by MCIN/AEI/10.13039/501100011033 and the EU "NextGenerationEU/PRTR"). Dual-beam FIB-SEM characterization was funded by ICTS ELECMI grants ELC217–2023 and ELC384–2024. Authors would like to acknowledge the Spanish Ministry of Economy and Competitiveness (PID2020–113819RB-I00, PID2021–122409OB-C21, and PID2021–125762NB-I00) and the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (ICoMICS grant agreement No 101018587). KG.P and J.Z-Z gratefully acknowledge the support of Aragon Institute of Engineering Research (I3A, Ayuda para practicas con TFM) and the Spanish Ministry of Education and Professional Formation (FPU21/06003), respectively. A.C-V gratefully acknowledges the Department of Science, University, and Knowledge Society of the Government of Aragon (predoctoral contract, Call No. 2023–27)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Hydrocolloids of egg white and gelatin as a platform for hydrogel-based tissue engineering

  • Pele, Karinna Georgiana
  • Amaveda, Hippolyte
  • Mora, Mario
  • Marcuello, Carlos
  • Lostao, Anabel
  • Alamán-Díez, Pilar
  • Pérez-Huertas, Salvador
  • Pérez, María Ángeles
  • García-Aznar, José Manuel
  • García-Gareta, Elena
Innovative materials are needed to produce scaffolds for various tissue engineering and regenerative medicine (TERM) applications, including tissue models. Materials derived from natural sources that offer low production costs, easy availability, and high bioactivity are highly preferred. Chicken egg white (EW) is an overlooked protein-based material. Whilst its combination with the biopolymer gelatin has been investigated in the food technology industry, mixed hydrocolloids of EW and gelatin have not been reported in TERM. This paper investigates these hydrocolloids as a suitable platform for hydrogel-based tissue engineering, including 2D coating films, miniaturized 3D hydrogels in microfluidic devices, and 3D hydrogel scaffolds. Rheological assessment of the hydrocolloid solutions suggested that temperature and EW concentration can be used to fine-tune the viscosity of the ensuing gels. Fabricated thin 2D hydrocolloid films presented globular nano-topography and in vitro cell work showed that the mixed hydrocolloids had increased cell growth compared with EW films. Results showed that hydrocolloids of EW and gelatin can be used for creating a 3D hydrogel environment for cell studies inside microfluidic devices. Finally, 3D hydrogel scaffolds were fabricated by sequential temperature-dependent gelation followed by chemical cross-linking of the polymeric network of the hydrogel for added mechanical strength and stability. These 3D hydrogel scaffolds displayed pores, lamellae, globular nano-topography, tunable mechanical properties, high affinity for water, and cell proliferation and penetration properties. In conclusion, the large range of properties and characteristics of these materials provide a strong potential for a large variety of TERM applications, including cancer models, organoid growth, compatibility with bioprinting, or implantable devices.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Collagen-laponite nanoclay hydrogels for tumor spheroid growth

  • Alamán-Díez, P.
  • Borau, C.
  • Guerrero, P. E.
  • Amaveda, H.
  • Mora, M.
  • Fraile, J. M.
  • García-Gareta, E.
  • García-Aznar, J. M.
  • Pérez, M. Á.
The extracellular matrix (ECM) plays an important regulatory role in the development and progression of tumoral tissue. Its functions and properties are crucial in determining tumor cell behavior such as invasion, migration, and malignancy development. Our study explores the role of collagen type I in cancer development and spread using engineered tumor models like multicellular spheroids grown in collagen-based hydrogels to simulate early tumor formation. We employ microfluidic techniques to test the hypothesis that (i) adding Laponite nanoclay to collagen hydrogels modifies mechanical and rheological properties and (ii) changing the stiffness of the collagen microenvironment affects tumor spheroid growth. Our findings support our theories and suggest the use of ECM components and engineered tumor models in cancer research, offering a biocompatible and biomimetic method to tailor the mechanical properties of conventional collagen hydrogels.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

The rise of mechanical metamaterials: Auxetic constructs for skin wound healing

  • Lecina-Tejero, Óscar
  • Pérez, María Ángeles
  • García-Gareta, Elena
  • Borau, Carlos
Auxetic materials are known for their unique ability to expand/contract in multiple directions when stretched/compressed. In other words, they exhibit a negative Poisson’s ratio, which is usually positive for most of materials. This behavior appears in some biological tissues such as human skin, where it promotes wound healing by providing an enhanced mechanical support and facilitating cell migration. Skin tissue engineering has been a growing research topic in recent years, largely thanks to the rapid development of 3D printing techniques and technologies. The combination of computational studies with rapid manufacturing and tailored designs presents a huge potential for the future of personalized medicine. Overall, this review article provides a comprehensive overview of the current state of research on auxetic constructs for skin healing applications, highlighting the potential of auxetics as a promising treatment option for skin wounds. The article also identifies gaps in the current knowledge and suggests areas for future research. In particular, we discuss the designs, materials, manufacturing techniques, and also the computational and experimental studies on this topic.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Physico-chemical characterization of the tumour microenvironment of pancreatic ductal adenocarcinoma

  • García-Gareta, Elena
  • Calderón Villalba, Alejandro
  • Alamán-Díez, Pilar
  • Gracia Costa, Carlos
  • Guerrero, Pedro Enrique
  • Mur, Carlota
  • Rueda Flores, Ana
  • Olivera Jurjo, Nerea
  • Sancho, Patricia
  • Pérez, María Ángeles
  • García-Aznar, José Manuel
Pancreatic ductal adenocarcinoma (PDAC) is a highly aggressive lethal malignancy that accounts for more than 90% of pancreatic cancer diagnoses. Our research is focused on the physico-chemical properties of the tumour microenvironment (TME), including its tumoural extracellular matrix (tECM), as they may have an important impact on the success of cancer therapies. PDAC xenografts and their decellularized tECM offer a great material source for research in terms of biomimicry with the original human tumour. Our aim was to evaluate and quantify the physico-chemical properties of the PDAC TME. Both cellularized (native TME) and decellularized (tECM) patient-derived PDAC xenografts were analyzed. A factorial design of experiments identified an optimal combination of factors for effective xenograft decellularization. Our results provide a complete advance in our understanding of the PDAC TME and its corresponding stroma, showing that it presents an interconnected porous architecture with very low permeability and small pores due to the contractility of the cellular components. This fact provides a potential therapeutic strategy based on the therapeutic agent size.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

3D porous binary composites of collagen, elastin, and fibrin proteins orchestrate adipose tissue regeneration

  • Sawadkar, Prasad
  • Mandakhbayar, Nandin
  • Patel, Kapil D.
  • Owji, Nazanin
  • Rajasekar, Poojitha
  • Sarama, Roudin
  • Lee, Jung-Hwan
  • Kim, Hae-Won
  • Knowles, Jonathan
  • García-Gareta, Elena
The objective for this study is to advance the development of a specialized biomaterial that can effectively facilitate the regeneration of adipose tissue. In prior studies, the assessment of collagen (Col), elastin (Ela), and fibrin (Fib) unary scaffolds has been conducted. However, it is important to note that native adipose tissue is comprised of a diverse array of extracellular matrix (ECM) constituents. To mimic this behavior, binary compositions of collagen, elastin, and fibrin are fabricated in a 1:1 ratio, resulting in the formation of Col/Ela, Col/Fib, and Ela/Fib composites through a customized fabrication procedure. The physical properties of these scaffolds are comprehensively analyzed using a range of material characterization techniques. Additionally, the biological properties of the scaffolds are investigated by examining the survival, proliferation, and phenotype of adipose‐derived stem cells. Subsequently, the aforementioned binary scaffolds are implanted into a rodent model for 28 days. the explants are analysed through X‐ray microtomography, histology, and immunohistochemistry. The findings of the study demonstrate that the utilization of binary combinations of Col/Ela, Col/Fib, and Ela/Fib has a discernible impact on the physical and biological characteristics of the scaffolds. Nevertheless, Ela/Fib exhibits characteristics that make it a suitable candidate for adipogenesis due to its notable upregulation of caveolin‐1 expression in both acellular and cellular cohorts. The combination of two natural polymers in this cell–material interaction has significantly enhanced the comprehension of adipogenesis.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Polydopamine interfacial coating for stable Tumor-on-a-Chip models: application for Pancreatic Ductal Adenocarcinoma

  • Hernández-Hatibi, Soraya
  • Guerrero, Pedro Enrique
  • García-Aznar, José Manuel
  • García-Gareta, Elena
Addressing current challenges in solid tumor research requires advanced in vitro three-dimensional (3D) cellular models that replicate the inherently 3D architecture and microenvironment of tumor tissue, including the extracellular matrix (ECM). However, tumor cells exert mechanical forces that can disrupt the physical integrity of the matrix in long-term 3D culture. Therefore, it is necessary to find the optimal balance between cellular forces and the preservation of matrix integrity. This work proposes using polydopamine (PDA) coating for 3D microfluidic cultures of pancreatic cancer cells to overcome matrix adhesion challenges to sustain representative tumor 3D cultures. Using PDA’s distinctive adhesion and biocompatibility, our model uses type I collagen hydrogels seeded with different pancreatic cancer cell lines, prompting distinct levels of matrix deformation and contraction. Optimizing the PDA coating enhances the adhesion and stability of collagen hydrogels within microfluidic devices, achieving a balance between the disruptive forces of tumor cells on matrix integrity and the maintenance of long-term 3D cultures. The findings reveal how this tension appears to be a critical determinant in spheroid morphology and growth dynamics. Stable and prolonged 3D culture platforms are crucial for understanding solid tumor cell behavior, dynamics, and responses within a controlled microenvironment. This advancement ultimately offers a powerful tool for drug screening, personalized medicine, and wider cancer therapeutics strategies.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Ex Ovo Chorioallantoic Membrane Assay as a Model of Bone Formation by Biomaterials

  • Owji, Nazanin
  • Kohli, Nupur
  • Frost, Oliver G
  • Sawadkar, Prasad
  • Snow, Martyn
  • Knowles, Jonathan C
  • García-Gareta, Elena
Biomaterials play an increasingly critical role in bone tissue engineering. However, achieving effective clinical translation requires a careful choice of biomimetic materials and thorough assessment of their efficacy and safety. Existing in vitro and in vivo models have drawbacks including time and cost constraints, invasive procedures, and discordance between animal models and clinical outcomes. Therefore, there is a demand for an alternative model. We hypothesized that the chick embryo chorioallantoic membrane can serve as a bioreactor to evaluate the initial sign of bone formation on scaffolds. In parallel, we investigated the osteogenic potential of a previously fabricated fibrin-alginate-calcium phosphate biomaterial (FACaP). Blood vessels were observed to infiltrate the scaffolds with early signs of bone formation, confirmed via RUNX-2 and alpha smooth muscle actin markers. The scaffolds’ chemical composition was evaluated by Fourier-transform infrared spectroscopy, and ion chromatography was used to assess calcium ion release. Finally, the topography was examined by atomic force microscopy. In conclusion, this system offers simple refinement for in vivo models in bone tissue engineering and highlights the great potential of FACaP as an angiogenic and osteogenic biomaterial for non-load-
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Novel hydrogel-based cancer-on-a-chip models for growth of 3D multi-cellular structures and investigation of early angiogenesis in pancreatic ductal adenocarcinoma

  • Pele, Karinna Georgiana
  • Calderón-Villalba, Alejandro
  • Amaveda, Hippolyte
  • Mora, Mario
  • Zhang-Zhou, Jack
  • Pérez, María Ángeles
  • García-Aznar, José Manuel
  • Alamán-Díez, Pilar
  • García-Gareta, Elena
Cancer-on-a-chip models have enormous potential for the study of tumour development events. Here, we investigated hydrogels of egg white (EW) and gelatin for growth of 3D multi-cellular structures and investigation of early angiogenesis inside microfluidic devices. We focused on pancreatic ductal adenocarcinoma (PDAC), a devastating gastrointestinal malignancy. EW/gelatin hydrogels were stiffer and showed porous globular structures compared to the fibrous network of collagen I molecules. PANC-1 cells preferentially formed significantly larger spheroids in collagen I than in EW/gelatin hydrogels, whilst cell aggregates in the shape of grape-like clusters were significantly larger and more abundant in EW/gelatin. Cells inside the aggregates showed active cell unions, secreted matrix, and formed active unions with the surrounding EW/gelatin hydrogel. Early stages of PDAC were recreated by co-culture of two different microenvironments, one for PANC-1 and another one for fibroblasts, for investigating the secretion of soluble angiogenic factors, which depended on the role of each factor in the angiogenic and tumorigenic processes. Overall, cancer cell proliferation and establishment of a tumour vasculature were favoured. This study demonstrates the importance of the microenvironment in tumour cells behaviour as well as the complex interplay between the different cells present in PDAC to establish a tumoural vasculature.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Innovative hydrogels in cutaneous wound healing: current status and future perspectives

  • Sawadkar, Prasad
  • Lali, Ferdinand
  • Garcia-Gareta, Elena
  • Garrido, Beatriz Gil
  • Chaudhry, Abdullah
  • Matharu, Priya
  • Kyriakidis, Christos
  • Greco, Karin
Chronic wounds pose a substantial burden on healthcare systems, necessitating innovative tissue engineering strategies to enhance clinical outcomes. Hydrogels, both of natural and synthetic origin, have emerged as versatile biomaterials for wound management due to their structural adaptability, biocompatibility, and tunable physicochemical properties. Their hydrophilic nature enables efficient nutrient transport, waste removal, and cellular integration, while their malleability facilitates application to deep and irregular wounds, providing an optimal microenvironment for cell adhesion, proliferation, and differentiation. Extracellular matrix (ECM)- based hydrogels retain bioactive molecules that support cellular infiltration, immune modulation, and tissue remodelling, making them highly effective scaffolds for growth factor delivery and regenerative therapies. Additionally, their injectability and potential for in situ polymerization enable minimally invasive applications, allowing on-demand gelation at target sites. By modifying their mechanical properties through crosslinking, hydrogels can achieve enhanced structural stability, prolonged degradation control, and improved surgical handling, optimizing their functionality in dynamic wound environments. This review outlines current approaches to skin tissue engineering, examining the biomaterials employed in hydrogel design, their limitations, and their interactions with host tissues. Furthermore, it highlights the emerging potential of functionalized injectable hydrogels, particularly those engineered for controlled drug release, enhanced bioactivity, and patient-specific therapeutic applications. These hydrogels offer a transformative platform for advanced wound care and regenerative medicine.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

An experimental workflow for bioprinting optimization: Application to a custom-made biomaterial ink

  • Martín Compaired, Pablo
  • García-Gareta, Elena
  • Pérez, María Ángeles
Bioprinting is an emerging technology with significant potential in biomedical fields, enabling the creation of highly customized, cell-laden constructs. Despite the promise, achieving high-quality, reproducible prints remains challenging due to the lack of standardized protocols, which has hindered widespread adoption of the technique. In this study, we present a systematic bioprinting protocol designed to optimize the performance of an in-house photo-curable biomaterial ink composed of gelatin methacryloyl (GelMA) and egg white protein. Printing quality was evaluated through three key assessments: extrusion, deposition, and printability. To facilitate accurate image analysis, we developed a custom 3D-printed lens support specifically designed for a USB-microscope. Additionally, we implemented a Python script to quantitatively assess bioprinting quality. Our results indicate that a pressure range of 70-80 KPa, combined with speeds between 300 and 900 mm/min, yields reliable extrusion flow, with 75 KPa and 600 mm/min emerging as optimal parameters for bioprinting 3D constructs. These findings underscore the importance of carefully tuning parameters – including pressure and speed – to achieve stable, high-resolution extrusions. Such optimization mitigates common printing issues, including tip clogging, filament dragging, and unintended merging of adjacent filaments, thereby enhancing structural accuracy. This work provides a comprehensive framework for evaluating and optimizing bioprinting parameters, offering a reproducible methodology to enhance print quality. Contributing to the ongoing efforts to standardize bioprinting processes and advance their applications in tissue engineering and regenerative medicine.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Rational design and modeling of auxetic fiber scaffolds for soft tissue engineering via melt electrowriting

  • Lecina-Tejero, Óscar
  • Iamsamang, Jirawat
  • Alamán-Díez, Pilar
  • García-Gareta, Elena
  • Cuartero, Jesús
  • Pérez, María Ángeles
  • Castilho, Miguel
  • Borau, Carlos
Background: The development of regenerative biomaterial scaffolds with mechanical properties tailored to native soft tissues remains a challenge in tissue engineering. Mechanical metamaterials with auxetic architectures have taken enormous flight over the past years, as they offer improved control over mechanical function and performance through spatially defined material architecture. However, despite their potential, auxetic scaffold designs are often developed empirically, and the relationship between scaffold microarchitecture, mechanical function, and manufacturability remains poorly defined, limiting their applicability in tissue engineering. In this study, we present a computational framework for the rational design of auxetic fiber scaffolds manufactured using Melt Electro-writing (MEW) for soft tissue engineering. To address the challenge of tailoring scaffold mechanical properties to native tissue, we integrated finite element method (FEM) modeling with experimental validation to predict the mechanical behavior of the scaffolds. Method: The micro-fibrous scaffolds with customizable auxetic re-entrant structures were designed using Python scripts for generating G-code used in fabrication and for model definition in FEM modeling, respectively. Four distinct auxetic structures – HCELL, SREG, SINV, and STRI – were selected for this study to cover the wide range of mechanical properties of soft tissue, and their geometry parameters were adjusted to reduce the pore size while considering printing resolution. FEM modeling was employed to predict the mechanical behavior of the scaffolds. To validate the predictions, the scaffolds were manufactured via MEW and characterized mechanically under biaxial tensile loading. Results and conclusion: MEW manufacturing enabled the production of auxetic fiber scaffolds with sub-millimeter pore resolution, while rational design allowed to correct fabrication discrepancies and improve printed design fidelity. Experimental biaxial characterization of the scaffolds revealed design-dependent, biphasic, non-linear mechanical response, and the developed FEM model was capable of not only accurately simulating the observed mechanical response but also accounting for variations introduced by MEW during fabrication. Additionally, auxetic scaffolds supported fibroblast viability over 7 days, confirming biocompatibility as a first step toward soft tissue engineering. The good alignment between numerical predictions and experimental results highlights the value of FEM modeling as a powerful computational tool for guiding the design and optimization of auxetic scaffolds with tailored mechanical performance for specific soft tissue requirements. The presented methodology offers a significant advancement in the development of functional biomaterials for biomedical applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Ultrastructural study of microphysiological systems of the tumor microenvironment

  • Guerrero-López, Paula
  • Pele, Karinna Georgiana
  • Barrado, Mariano
  • Alamán-Díez, Pilar
  • García-Aznar, José Manuel
  • García-Gareta, Elena
The importance of studying the ultrastructure is underwritten by decades of research. Ultrastructural features help to understand pathological processes or inform disease diagnosis. However, ultrastructural studies in the promising cancer‐on‐a‐chip models are practically nonexistent because of the complexity of sample preparation for electron microscopy techniques, which is particularly aggravated with these miniaturized models. Our aim was to study ultrastructural features of microphysiological systems (MPS) of the tumor microenvironment consisting of 3D multicellular tumor structures that were grown in hydrogel‐based cancer‐on‐a‐chip models. To this end, we selected two different MPS from our lab as examples and devised a sample preparation technique for their observation under dual‐beam focused ion beam scanning electron microscopy (FIB‐SEM) and transmission electron microscopy (TEM). The proposed methodology allowed high‐resolution visualization of both external and internal organization of 3D multicellular tumor structures, including cell–matrix interactions, cell–cell junctions, spheroid–spheroid contacts, matrix deposition, and extracellular vesicle‐mediated intercellular communication. This study demonstrates the feasibility of using advanced electron microscopy techniques to observe ultrastructural features of miniaturized cancer models, thus revealing a new dimension in the use of these models to study tumor processes and find new therapeutic targets.