Pasar al contenido principal

PLATAFORMA DE INGENIERIA DE TEJIDOS PARA EL DISEÑO MECANICO, EL TESTEO IN VIVO Y MODELADO IN SILICO DE ANDAMIOS DE PIEL PARA TRATAMIENTO DE HERIDAS CRONICAS.

PID2023-146072OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2023
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ZARAGOZA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Non-linear characterization of commercial and decellularized hydrogels: Statistical framework enhanced by bayesian optimization

  • García-García, D. E.
  • Marques, D.
  • Amaveda, Hippolyte
  • Mora Alfonso, Mario
  • Asín, Javier
  • Villaoslada, I.
  • Baptista, Pedro M.
  • Pérez, María Ángeles
  • García-Aznar, José Manuel
The data and code developed throughout this document will be made available on request., [Scope]: Hydrogels are widely used in the design of tissue substitutes because of their ability to mimic the extracellular matrix (ECM). Their mechanical cues critically influence the cellular response, making accurate characterization essential. However, it remains challenging due to their intricate nature. This study computationally evaluates the hyperelastic properties of next-generation hydrogels of high biomedical interest, including basal membrane extract and decellularized liver matrices, as well as structural proteins., [Methods]: We present a combined framework based on Bayesian optimization and statistical analyses that go beyond classical least-squares fitting, leveraging rheological experimental data. It defines each hyperelastic strain-energy density function, and addresses both intra- and inter-sample variability. This approach quantifies uncertainty and reveals the natural variability that deterministic models overlook, and it also enables quantification of coefficient variation with composition., [Results]: Validation against experimental data shows computational fits of 5% error in most cases, and low calculation time. Analyses reveal that composition-collagen addition, fibrin concentration, and decellularized extracellular matrix (dECM) age-modulate initial stiffness, nonlinearity, and overall mechanical resistance of the hydrogels., [Conclusion]: Hydrogels derived from basal membrane extracts exhibit comparable non-linear mechanics, while collagen addition reduces stiffness and nonlinearity. In fibrin-based hydrogels with decellularized liver matrix, mechanical behavior is concentration and age-dependent. Such insights are highly relevant for mechanobiology, enabling prediction of how cells sense mechanical cues and scaffold composition influences in vivo interactions., This work is part of a Project that has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 Research and Innovation Programme (ICoMICS GA No. 101018587). Authors would like to acknowledge the following projects funded by MICIU/AEI/10.13039/501100011033 and by PID2024-155384OB-C21 (JMGA), PID2023-150234NB-I00 (JA), and PID2023-146072OB-I00 (MAP); JA would like to acknowledge Gobierno de Aragón under Research Group E46_23 R: Modelos Estocásticos and JMGA and MAP T50_23R: M2BE. PMB would like to acknowledge the Funded Projects PI21/00667 received by ISCiii. DEGG Grant (PRE2024-UZ-19) is funded by MICIU/AEI/10.13039/501100011033 and by FSE+., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

An experimental workflow for bioprinting optimization: Application to a custom-made biomaterial ink

  • Martín Compaired, Pablo
  • García-Gareta, Elena
  • Pérez, María Ángeles
Bioprinting is an emerging technology with significant potential in biomedical fields, enabling the creation of highly customized, cell-laden constructs. Despite the promise, achieving high-quality, reproducible prints remains challenging due to the lack of standardized protocols, which has hindered widespread adoption of the technique. In this study, we present a systematic bioprinting protocol designed to optimize the performance of an in-house photo-curable biomaterial ink composed of gelatin methacryloyl (GelMA) and egg white protein. Printing quality was evaluated through three key assessments: extrusion, deposition, and printability. To facilitate accurate image analysis, we developed a custom 3D-printed lens support specifically designed for a USB-microscope. Additionally, we implemented a Python script to quantitatively assess bioprinting quality. Our results indicate that a pressure range of 70-80 KPa, combined with speeds between 300 and 900 mm/min, yields reliable extrusion flow, with 75 KPa and 600 mm/min emerging as optimal parameters for bioprinting 3D constructs. These findings underscore the importance of carefully tuning parameters – including pressure and speed – to achieve stable, high-resolution extrusions. Such optimization mitigates common printing issues, including tip clogging, filament dragging, and unintended merging of adjacent filaments, thereby enhancing structural accuracy. This work provides a comprehensive framework for evaluating and optimizing bioprinting parameters, offering a reproducible methodology to enhance print quality. Contributing to the ongoing efforts to standardize bioprinting processes and advance their applications in tissue engineering and regenerative medicine.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Rational design and modeling of auxetic fiber scaffolds for soft tissue engineering via melt electrowriting

  • Lecina-Tejero, Óscar
  • Iamsamang, Jirawat
  • Alamán-Díez, Pilar
  • García-Gareta, Elena
  • Cuartero, Jesús
  • Pérez, María Ángeles
  • Castilho, Miguel
  • Borau, Carlos
Background: The development of regenerative biomaterial scaffolds with mechanical properties tailored to native soft tissues remains a challenge in tissue engineering. Mechanical metamaterials with auxetic architectures have taken enormous flight over the past years, as they offer improved control over mechanical function and performance through spatially defined material architecture. However, despite their potential, auxetic scaffold designs are often developed empirically, and the relationship between scaffold microarchitecture, mechanical function, and manufacturability remains poorly defined, limiting their applicability in tissue engineering. In this study, we present a computational framework for the rational design of auxetic fiber scaffolds manufactured using Melt Electro-writing (MEW) for soft tissue engineering. To address the challenge of tailoring scaffold mechanical properties to native tissue, we integrated finite element method (FEM) modeling with experimental validation to predict the mechanical behavior of the scaffolds. Method: The micro-fibrous scaffolds with customizable auxetic re-entrant structures were designed using Python scripts for generating G-code used in fabrication and for model definition in FEM modeling, respectively. Four distinct auxetic structures – HCELL, SREG, SINV, and STRI – were selected for this study to cover the wide range of mechanical properties of soft tissue, and their geometry parameters were adjusted to reduce the pore size while considering printing resolution. FEM modeling was employed to predict the mechanical behavior of the scaffolds. To validate the predictions, the scaffolds were manufactured via MEW and characterized mechanically under biaxial tensile loading. Results and conclusion: MEW manufacturing enabled the production of auxetic fiber scaffolds with sub-millimeter pore resolution, while rational design allowed to correct fabrication discrepancies and improve printed design fidelity. Experimental biaxial characterization of the scaffolds revealed design-dependent, biphasic, non-linear mechanical response, and the developed FEM model was capable of not only accurately simulating the observed mechanical response but also accounting for variations introduced by MEW during fabrication. Additionally, auxetic scaffolds supported fibroblast viability over 7 days, confirming biocompatibility as a first step toward soft tissue engineering. The good alignment between numerical predictions and experimental results highlights the value of FEM modeling as a powerful computational tool for guiding the design and optimization of auxetic scaffolds with tailored mechanical performance for specific soft tissue requirements. The presented methodology offers a significant advancement in the development of functional biomaterials for biomedical applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Regression-guided computational design of auxetic scaffolds for soft tissue applications

  • Lecina-Tejero, Óscar
  • Asín, Jesús
  • Cuartero, Jesús
  • Pérez, María Ángeles
  • Borau, Carlos
The mechanical performance of tissue-engineered scaffolds plays a critical role in their effectiveness for regenerative medicine. While auxetic metamaterials offer tunable mechanical behavior ideal for soft tissues, their design typically relies on inefficient, iterative trial-and-error processes. To address this limitation, this study presents an integrated computational framework for the inverse design of auxetic scaffolds. By combining Finite Element Method (FEM) simulations with regression-based models, we developed accurate predictive models capable of mapping microstructural parameters directly to macroscopic mechanical responses. This data-driven approach allowed for the rigorous optimization of four distinct auxetic architectures to replicate the complex, non-linear anisotropic properties of human skin, achieving strong agreement with literature targets. A primary contribution of this work is the development of a user-friendly software tool that integrates this pipeline. The tool allows users to input target mechanical properties and automatically generates optimized, fabrication-ready designs (including custom MEW G-code), effectively bridging the gap between theoretical metamaterial optimization and practical clinical application. This methodology supports robust, patient-specific scaffold development, significantly advancing the capabilities of soft tissue engineering.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Non-linear Characterization of Commercial and Decellularized Hydrogels: Statistical Framework Enhanced by Bayesian Optimization

  • García-García, D. E.
  • Marques, D.
  • Amaveda, H.
  • Mora, M.
  • Asín, J.
  • Villaoslada, I.
  • Baptista, P. M.
  • Pérez, M. A.
  • García-Aznar, J. M.
Scope Hydrogels are widely used in the design of tissue substitutes because of their ability to mimic the extracellular matrix (ECM). Their mechanical cues critically influence the cellular response, making accurate characterization essential. However, it remains challenging due to their intricate nature. This study computationally evaluates the hyperelastic properties of next-generation hydrogels of high biomedical interest, including basal membrane extract and decellularized liver matrices, as well as structural proteins. Methods We present a combined framework based on Bayesian optimization and statistical analyses that go beyond classical least-squares fitting, leveraging rheological experimental data. It defines each hyperelastic strain-energy density function, and addresses both intra- and inter-sample variability. This approach quantifies uncertainty and reveals the natural variability that deterministic models overlook, and it also enables quantification of coefficient variation with composition. Results Validation against experimental data shows computational fits of 5% error in most cases, and low calculation time. Analyses reveal that composition—collagen addition, fibrin concentration, and decellularized extracellular matrix (dECM) age—modulate initial stiffness, nonlinearity, and overall mechanical resistance of the hydrogels. Conclusion Hydrogels derived from basal membrane extracts exhibit comparable non-linear mechanics, while collagen addition reduces stiffness and nonlinearity. In fibrin-based hydrogels with decellularized liver matrix, mechanical behavior is concentration and age-dependent. Such insights are highly relevant for mechanobiology, enabling prediction of how cells sense mechanical cues and scaffold composition influences in vivo interactions.