Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Regeneration of methane splitting catalysts by interfacial hydrogenation

  • Alves, Luís
  • Pereira, Vitor
  • Delgado, Sofia
  • Dias, Paula
  • Lagarteira, Tiago
  • Mendes, Adélio
  • Atashi, Niloufar
  • Prieto González, Gonzalo|||0000-0002-0956-3040
[EN] Methane splitting, also known as decomposition or pyrolysis, has a unique potential to accelerate the transition from the current carbon-based economy towards the foreseen hydrogen economy. Low-temperature catalytic methane splitting systems are unavailable due to fast catalyst deactivation, caused by solid carbon that encapsulates the catalyst. Catalyst regeneration must be performed to reactivate the catalyst and achieve a long-term operational lifetime. This can be accomplished by cyclically refeeding a portion of the produced hydrogen back to the catalyst, which promotes the hydrogenation of carbon atoms, preferentially at the interface between carbon deposits and catalytic nanoparticles. Interfacial hydrogenation ideally breaks the bonds that connect carbon allotrope products to the metal catalyst, causing the former to detach, and freeing the catalytic metal surface for further reaction. In this work, a proof-of-concept of this technology is provided, showing the full regeneration of a bulk-type Ni catalyst during 22 cycles of methane splitting, at 550 degrees C and 1 bar. Furthermore, a commercial SiO2-Al2O3-supported Ni catalyst has been used to study the regenerability of a highly active nanostructured material by interfacial hydrogenation, using different reactor designs. It has been demonstrated that regeneration is beneficial to improve the stability of Ni-based systems, at the applied working conditions. Nevertheless, tip-grown carbon nanotubes were considered as a cause of permanent deactivation, which could not be solved by refeeding hydrogen into the system., The authors acknowledge the European Commission through the European Union's Horizon 2020 programme-FET Proactive research and innovation action-under grant agreement No. 952219 (112CO2) . This work was also supported by National funds through FCT/MCTES (PIDDAC) : LEPABE, UIDB/00511/2020 (DOI: 10.54499/UIDB/00511/2020) and UIDP/00511/2020 (DOI: 10.54499/UIDP/00511/2020) and ALiCE, LA/P/0045/2020 (DOI: 10.54499/LA/P/0045/2020) ; In addi-tion, financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033) is gratefully acknowledged. Luis Alves, Vitor Pereira, Sofia Delgado, and Paula Dias acknowledge the Portuguese Foundation of Science and Technology (FCT) support for their grants-2020.10008.BD, SFRH/BD/143218/2019, SFRH/BD/144338/201 and CEECIND/02862/2018, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of macro-structure of Ni-based catalysts on methane splitting systems

  • Alves, Luís
  • Pereira, Vitor
  • Dias, Paula
  • Lagarteira, Tiago
  • Meloni, Simone
  • Mendes, Adélio
  • Prieto González, Gonzalo|||0000-0002-0956-3040
[EN] Methane splitting, also known as methane decomposition or cracking, is an emergent technology to allow swift energy decarbonization since it produces hydrogen without emitting CO2. This work aims at improving hydrogen production from low temperature methane splitting process catalyzed on Ni surfaces. Six different systems were evaluated for their productivity: Ni-foil (pristine and acid treated), Ni particles deposited on alpha-Al2O3 and on carbon felt, and SiO2-Al2O3-supported Ni catalyst deposited on alpha-Al2O3 and on carbon felt. Ni-foil displayed negligible hydrogen production even after chemical abrasion treatments were used to increase the surface area. For alpha-Al2O3 substrates, the coating of Ni/SiO2-Al2O3 vastly outperformed the bulk Ni system (ca. 40 vs 0.011 gH2 & sdot;gNi -1 total hydrogen production). Depositing bulk Ni on carbon felt improved total hydrogen production to ca. 0.095 gH2 & sdot;gNi Ni/SiO2-Al2O3 deposited over carbon felt was particularly stable (40 gH2 & sdot;gNi-1 total hydrogen production), presenting an activity loss rate of ca. 0.011 & sdot;gH2 & sdot;gNi-1 & sdot;h- 2, compared to ca. 0.020 gH2 & sdot;gNi-1 & sdot;h- 2 for the Ni/SiO2-Al2O3 deposited over alpha-Al2O3. Furthermore, the mechanical integrity of the carbon felt-deposited film was shown to be maintained, while the alpha-Al2O3-deposited film structure collapsed, due to carbon formation., The authors acknowledge the funding received from the European Union's Horizon 2020 programme-FET Proactive research and inno-vation action-under grant agreement No. 952219 (project 112CO2) . This work was also supported by national funds through FCT/MCTES (PIDDAC) : LEPABE, UIDB/00511/2020 (DOI: 10.54499/UIDB/00 511/2020) and UIDP/00511/2020 (DOI: 10.54499/UIDP/00511/2020) and ALiCE, LA/P/0045/2020 (DOI: 10.54499/LA/P/0045/2020) . Luis Alves, Vitor Pereira, and Paula Dias acknowledge the Portuguese Foundation of Science and Technology (FCT) support for their grants 2020.10008.BD, SFRH/BD/143218/2019, and CEECIND/02862/2018, respectively. Simone Meloni acknowledges funding under the National Recovery and Resilience Plan (NRRP) , Mission 4 Component 1 ("Potenziamento dell'offerta dei servizi di istruzione: dagli asili nido all'Universita") , Investment 4.1 "Estensione del numero di dottorati di ricerca e dottorati innovativi per la pubblica amministrazione e il patrimonio culturale". The authors also thank the contribution of Nicola Verziaggi, from the Department of Chemical Pharmaceutical and Agricultural Sciences of the University of Ferrara, on the support in computational work and the fruitful discussion.