Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Do We Really Know Why Carbon Nanotubes Grow?

  • Verziaggi, Nicola
  • Bragagnolo, Matteo
  • Dias, Paula
  • Mendes, Adélio
  • Meloni, Simone
  • Atashi, Niloufar
  • Prieto González, Gonzalo|||0000-0002-0956-3040
[EN] The mesoscopic-level formation mechanism of carbon nanotube growth, particularly the transition from a graphene patch to a tube, remains unclear. Recent studies have focused on finding a complete description of this phenomenon to understand its origin and to have total control over the formation of carbon nanotubes. In this study, a thermodynamic model is proposed that follows the sharp interface model approach, in which all energy contributions to the total energy of the nanotube are identified as bulk or surface terms. This study proposes an additive model to calculate the total energy of these structures and identify the dominant energy contributions that determine whether the adsorbed carbon atoms form a growing cap on the catalyst nanoparticle or initiate a new carbon nanotube perpendicular to the surface. By comparing the total energy of these two mechanisms, the research aims to elucidate the energetic driving force behind each pathway for optimizing future nanotube growth processes. We also discuss the generality of the model introduced in this article, showing how it can incorporate temperature and disorder effects, thereby enabling the description of both vapor-solid-solid and vapor-liquid-solid mechanisms of carbon nanotube formation at relevant operating conditions. Finally, we outline a strategy for a genuine multiscale framework that combines the microscopic, atomistic picture of carbon nanotube formation with a meso/macroscopic nucleation and growth representation based on a sharp-interface model., European Commission under the Horizon 2020 programme FETPROACT-EIC-05-2019 (grant agreement Nr. 952219, 112CO2)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Regeneration of methane splitting catalysts by interfacial hydrogenation

  • Alves, Luís
  • Pereira, Vitor
  • Delgado, Sofia
  • Dias, Paula
  • Lagarteira, Tiago
  • Mendes, Adélio
  • Atashi, Niloufar
  • Prieto González, Gonzalo|||0000-0002-0956-3040
[EN] Methane splitting, also known as decomposition or pyrolysis, has a unique potential to accelerate the transition from the current carbon-based economy towards the foreseen hydrogen economy. Low-temperature catalytic methane splitting systems are unavailable due to fast catalyst deactivation, caused by solid carbon that encapsulates the catalyst. Catalyst regeneration must be performed to reactivate the catalyst and achieve a long-term operational lifetime. This can be accomplished by cyclically refeeding a portion of the produced hydrogen back to the catalyst, which promotes the hydrogenation of carbon atoms, preferentially at the interface between carbon deposits and catalytic nanoparticles. Interfacial hydrogenation ideally breaks the bonds that connect carbon allotrope products to the metal catalyst, causing the former to detach, and freeing the catalytic metal surface for further reaction. In this work, a proof-of-concept of this technology is provided, showing the full regeneration of a bulk-type Ni catalyst during 22 cycles of methane splitting, at 550 degrees C and 1 bar. Furthermore, a commercial SiO2-Al2O3-supported Ni catalyst has been used to study the regenerability of a highly active nanostructured material by interfacial hydrogenation, using different reactor designs. It has been demonstrated that regeneration is beneficial to improve the stability of Ni-based systems, at the applied working conditions. Nevertheless, tip-grown carbon nanotubes were considered as a cause of permanent deactivation, which could not be solved by refeeding hydrogen into the system., The authors acknowledge the European Commission through the European Union's Horizon 2020 programme-FET Proactive research and innovation action-under grant agreement No. 952219 (112CO2) . This work was also supported by National funds through FCT/MCTES (PIDDAC) : LEPABE, UIDB/00511/2020 (DOI: 10.54499/UIDB/00511/2020) and UIDP/00511/2020 (DOI: 10.54499/UIDP/00511/2020) and ALiCE, LA/P/0045/2020 (DOI: 10.54499/LA/P/0045/2020) ; In addi-tion, financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033) is gratefully acknowledged. Luis Alves, Vitor Pereira, Sofia Delgado, and Paula Dias acknowledge the Portuguese Foundation of Science and Technology (FCT) support for their grants-2020.10008.BD, SFRH/BD/143218/2019, SFRH/BD/144338/201 and CEECIND/02862/2018, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of macro-structure of Ni-based catalysts on methane splitting systems

  • Alves, Luís
  • Pereira, Vitor
  • Dias, Paula
  • Lagarteira, Tiago
  • Meloni, Simone
  • Mendes, Adélio
  • Prieto González, Gonzalo|||0000-0002-0956-3040
[EN] Methane splitting, also known as methane decomposition or cracking, is an emergent technology to allow swift energy decarbonization since it produces hydrogen without emitting CO2. This work aims at improving hydrogen production from low temperature methane splitting process catalyzed on Ni surfaces. Six different systems were evaluated for their productivity: Ni-foil (pristine and acid treated), Ni particles deposited on alpha-Al2O3 and on carbon felt, and SiO2-Al2O3-supported Ni catalyst deposited on alpha-Al2O3 and on carbon felt. Ni-foil displayed negligible hydrogen production even after chemical abrasion treatments were used to increase the surface area. For alpha-Al2O3 substrates, the coating of Ni/SiO2-Al2O3 vastly outperformed the bulk Ni system (ca. 40 vs 0.011 gH2 & sdot;gNi -1 total hydrogen production). Depositing bulk Ni on carbon felt improved total hydrogen production to ca. 0.095 gH2 & sdot;gNi Ni/SiO2-Al2O3 deposited over carbon felt was particularly stable (40 gH2 & sdot;gNi-1 total hydrogen production), presenting an activity loss rate of ca. 0.011 & sdot;gH2 & sdot;gNi-1 & sdot;h- 2, compared to ca. 0.020 gH2 & sdot;gNi-1 & sdot;h- 2 for the Ni/SiO2-Al2O3 deposited over alpha-Al2O3. Furthermore, the mechanical integrity of the carbon felt-deposited film was shown to be maintained, while the alpha-Al2O3-deposited film structure collapsed, due to carbon formation., The authors acknowledge the funding received from the European Union's Horizon 2020 programme-FET Proactive research and inno-vation action-under grant agreement No. 952219 (project 112CO2) . This work was also supported by national funds through FCT/MCTES (PIDDAC) : LEPABE, UIDB/00511/2020 (DOI: 10.54499/UIDB/00 511/2020) and UIDP/00511/2020 (DOI: 10.54499/UIDP/00511/2020) and ALiCE, LA/P/0045/2020 (DOI: 10.54499/LA/P/0045/2020) . Luis Alves, Vitor Pereira, and Paula Dias acknowledge the Portuguese Foundation of Science and Technology (FCT) support for their grants 2020.10008.BD, SFRH/BD/143218/2019, and CEECIND/02862/2018, respectively. Simone Meloni acknowledges funding under the National Recovery and Resilience Plan (NRRP) , Mission 4 Component 1 ("Potenziamento dell'offerta dei servizi di istruzione: dagli asili nido all'Universita") , Investment 4.1 "Estensione del numero di dottorati di ricerca e dottorati innovativi per la pubblica amministrazione e il patrimonio culturale". The authors also thank the contribution of Nicola Verziaggi, from the Department of Chemical Pharmaceutical and Agricultural Sciences of the University of Ferrara, on the support in computational work and the fruitful discussion.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Carbon-induced metal growth and size-dependent activity in methane splitting on nickel nanoparticle catalysts for COx-free hydrogen production

  • Atashi, Niloufar
  • Palomares-Ferrando, Adrià
  • Prieto González, Gonzalo|||0000-0002-0956-3040
  • Verziaggi, Nicola
  • Alves, Luis
  • Mendes, Adélio
  • Meloni, Simone
[EN] Catalytic methane splitting (CMS) to hydrogen and elemental carbon is a promising route to produce COx-free hydrogen, potentially achieving net carbon-negative output when using biogenic methane as the feedstock. On transition metal nanocrystals, especially Ni, CMS proceeds at lower temperatures (<1000 K) compared to (plasma-assisted) methane pyrolysis, additionally leading to higher added-value graphitic carbon nanostructure products. Earlier work has indicated that the size of the metal nanocrystals plays a central role for hydrogen (and carbon) production rates, however, conflicting results have been reported, possibly as a result of challenges associated to the deposition of the carbon products on the catalyst surface as well as phenomena like metal particle growth, fragmentation and deactivation. Herein metal nanocrystal size effects are assessed on the methane splitting reaction rate with a series of model supported Ni catalysts. A maximum methane splitting rate is attained for Ni nanoparticles with a diameter of similar to 10 nm at the onset of the reaction. Operando synchrotron X-ray diffraction and activity-specific transmission electron microscopy studies attribute the observed size effects on reaction rate to differences in the relative contribution of Ni nanocrystals larger and smaller than ca. 10 nm. This metal nanoparticle diameter represents a threshold minimum size for the effective nucleation and growth of graphitic carbon filaments, and therefore for sustained hydrogen production, which entails the lifting of Ni nanocrystals away from the oxide support in a carbon tip-growth mechanism. Moreover, operando studies reveal metal nanocrystal growth, which is specifically driven by the earliest methane splitting events on the catalyst surface, and determinant for the metal aggregation extent and intrinsic activity of the actual working catalyst. Density Functional Theory analyses identify *C and *CH3 adspecies, emerging from CH4 splitting on neat Ni surfaces, as central mediators to attain favourable energetics for the detachment of Ni adatoms from coordinatively unsaturated sites on the metal nanocrystals and their emission onto the oxide support material, hence responsible for a catalysis-driven Ostwald ripening metal growth mechanism. The results contribute to rationalize the interplay between metal nanocrystal size and carbon-metal dynamics to define an optimal Ni nanoparticle size of similar to 10 nm for a maximum hydrogen production rate, providing a blueprint for designing optimized catalysts for low-temperature methane splitting., This work has received funding from the European Commission under the Horizon 2020 programme FETPROACT-EIC-05-2019 (grant agreement Nr. 952219, 112CO2) . Specific contributions have addi-tionally received funding from the European Research Council, ERC-CoG grant, grant agreement Nr. 864195, and the Advanced Materials programme supported by the MCIN with funding from the European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana (MFA/2022/012) . Financial support by the Spanish Ministry of Science and Innovation grant numbers PID2022-140111OB-I00 and CEX2021-001230-S funded by MCIN/AEI/10.13039/501100011033 is also acknowledged. Benchtop synchrotron radiation research instrumentation applied in this study has been developed within the CSIC Interdisciplinary Thematic Platform (PTI +) Transicion Energetica Sostenible + (PTI-TRANSENER +) as part of the CSIC program for the Spanish Recovery, Transformation and Resilience Plan funded by the Recovery and Resilience Facility of the European Union, established by the Regulation (EU) 2020/2094. A. Palomares acknowledges CSIC for a JAE-Intro fellowship (Nr. JAEINT-22-EX-0795) for undergraduates. Authors are beholden to Sasol Materials for the provision of high-purity Al<SUB>2</SUB>O<SUB>3</SUB> precursors. The operando , high-resolution XRD experiment has been performed at the NOTOS beamline of the ALBA Synchrotron Light Source, Spain with assistance from ALBA staff. C. Escudero, E. Villalo-bos, G. Agostini and C. Marini are greatly acknowledged for assistance with cell validation and experiment setup. M. Tadeo and A. Ferrero, A. Munoz and M. Arribas (ITQ) are acknowledged for contributions to N<SUB>2</SUB> physisorption, Raman spectroscopy and H<SUB>2</SUB> chemisorption experiments, respectively. J. Prieto is acknowledged for contribution to artwork design. N.V. acknowledges the CINECA award under the ISCRA initiative, for availability of high-performance computing resources and support. Staff members of the Electron Microscopy department at the UPV are acknowledged for training, support and maintenance of electron microscopy facilities.