Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Epitaxial growth of visible to infra-red transparent conducting In2O3 nanodot dispersions and reversible charge storage as a Li-ion battery anode

  • Khunsin, W.
  • Sotomayor Torres, C. M.
  • O'Dwyer, Colm
Unique bimodal distributions of single crystal epitaxially grown In 2O3 nanodots on silicon are shown to have excellent IR transparency greater than 87% at IR wavelengths up to 4 ¿m without sacrificing transparency in the visible region. These broadband antireflective nanodot dispersions are grown using a two-step metal deposition and oxidation by molecular beam epitaxy, and backscattered diffraction confirms a dominant (111) surface orientation. We detail the growth of a bimodal size distribution that facilitates good surface coverage (80%) while allowing a significant reduction in In2O3 refractive index. This unique dispersion offers excellent surface coverage and three-dimensional volumetric expansion compared to a thin film, and a step reduction in refractive index compared to bulk active materials or randomly porous composites, to more closely match the refractive index of an electrolyte, improving transparency. The (111) surface orientation of the nanodots, when fully ripened, allows minimum lattice mismatch strain between the In2O3 and the Si surface. This helps to circumvent potential interfacial weakening caused by volume contraction due to electrochemical reduction to lithium, or expansion during lithiation. Cycling under potentiodynamic conditions shows that the transparent anode of nanodots reversibly alloys lithium with good Coulombic efficiency, buffered by co-insertion into the silicon substrate. These properties could potentially lead to further development of similarly controlled dispersions of a range of other active materials to give transparent battery electrodes or materials capable of non-destructive in situ spectroscopic characterization during charging and discharging. © 2013 IOP Publishing Ltd., MO acknowledges the support of the Irish Research Council under award no. RS/2010/2170. WK and CMST acknowledge support from the Spanish MINECO projects ACPHIN (FIS2009-10150) and TAPHOR (MAT2012-31392), the CONSOLIDER project nanoTHERM (CSD2010-00044) and the Catalan AGAUR grant 2009-SGR-150. COD acknowledges support from Science Foundation Ireland under award no. 07/SK/B1232a., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A novel contactless technique for thermal field mapping and thermal conductivity determination: Two-Laser Raman Thermometry

  • Reparaz, J. S.
  • Chávez-Angel, Emigdio
  • Wagner, M. R.
  • Graczykowski, Bartlomiej
  • Gomis-Bresco, J.
  • Alzina, Francesc
Under the terms of the Creative Commons Attribution (CC BY) license to their work., We present a novel contactless technique for thermal conductivity determination and thermal field mapping based on creating a thermal distribution of phonons using a heating laser, while a second laser probes the local temperature through the spectral position of a Raman active mode. The spatial resolution can be as small as 300 nm, whereas its temperature accuracy is ±2 K. We validate this technique investigating the thermal properties of three free-standing single crystalline Si membranes with thickness of 250, 1000, and 2000 nm. We show that for two-dimensional materials such as free-standing membranes or thin films, and for small temperature gradients, the thermal field decays as T(r) ∝ ln(r) in the diffusive limit. The case of large temperature gradients within the membranes leads to an exponential decay of the thermal field, T ∝ exp[ − A·ln(r)]. The results demonstrate the full potential of this new contactless method for quantitative determination of thermal properties. The range of materials to which this method is applicable reaches far beyond the here demonstrated case of Si, as the only requirement is the presence of a Raman active mode., The authors acknowledge the financial support from the FP7 projects MERGING (Grant No. 309150), NANO-RF (Grant No. 318352), NANOTHERM (Grant No. 318117), NANOTEG-ENIAC (Grant No. 270789-2), and the Spanish MICINN projects nanoTHERM (Grant No. CSD2010-0044) and TAPHOR (MAT2012-31392). E.C.A. gratefully acknowledges a Becas Chile 2010 CONICYT fellowship from the Chilean government., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanoarchitecture effects on persistent room temperature photoconductivity and thermal conductivity in ceramic semiconductors: Mesoporous, yolk-shell, and hollow ZnO spheres

  • Dilger, Stefan
  • Wagner, M. R.
  • Reparaz, J. S.
  • Sotomayor Torres, C. M.
  • Polarz, Sebastian
Whereas size effects have been investigated extensively and are largely understood, it is significantly more challenging to elucidate how functional properties of semiconductors can be altered and ultimately be improved by a hierarchical nanoarchitecture. For semiconductor applications, such as in photovoltaics or photocatalysis, it is of great importance to learn how to avoid the recombination of photogenerated charge carriers and how to enhance their lifetime. A gas-phase synthesis method is explored, which enables the generation of spherical zinc oxide nanostructures with compact, mesoporous, a special type of core-shell, so-called yolk-shell, or hollow character. The particles with hollow character exhibit an extraordinarily long persistence of photogenerated charge carriers. It is demonstrated that the presence of the ZnO shell and its special orientation with respect to the polar character of the wurtzite lattice represent deciding factors. After photoexcitation, electrons and holes migrate to opposite sides of the interfaces, where they are stabilized. Moreover, photoluminescence thermometry was used to determine the thermal conductivity of the samples, which is lowered by a factor of ~100 compared with bulk ZnO. The thermal conductivity of this type of nanostructure is found to be only 10 times larger than that of air, and this points toward potential applications as thermoelectrics. © 2014 American Chemical Society., SP acknowledges the German Research Foundation (Grant PO 780/8-1) and the Carl-Zeiss Foundation (project Refine) for funding. ICN2 acknowledges financial support from the Spanish MICINN projects TAPHOR (Grant MAT2012-31392), nanoTHERM (Grant No. CSD2010-0044), and the FP7 projects NANOTEG-ENIAC (Grant No. 270789-2), NANOTHERM (Grant No. 318117), and MERGING (Grant No. 309150). M.R.W. gratefully acknowledges the Marie Curie Fellowship (IEF) HeatProNano (Grant No. 628197). L.Q. acknowledges support through the China Scholarship Council., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tuning thermal transport in ultrathin silicon membranes by surface nanoscale engineering

  • Neogi, Sanghamitra
  • Reparaz, J. S.
  • Pereira, Luiz Felipe C.
  • Graczykowski, Bartlomiej
  • Wagner, M. R.
  • Sledzinska, Marianna
  • Shchepetov, A.
  • Prunnila, M.
  • Ahopelto, Jouni
  • Sotomayor Torres, C. M.
  • Donadio, Davide
ACS AuthorChoice - This is an open access article published under an ACS AuthorChoice License, which permits copying and redistribution of the article or any adaptations for non-commercial purposes., A detailed understanding of the connections of fabrication and processing to structural and thermal properties of low-dimensional nanostructures is essential to design materials and devices for phononics, nanoscale thermal management, and thermoelectric applications. Silicon provides an ideal platform to study the relations between structure and heat transport since its thermal conductivity can be tuned over 2 orders of magnitude by nanostructuring. Combining realistic atomistic modeling and experiments, we unravel the origin of the thermal conductivity reduction in ultrathin suspended silicon membranes, down to a thickness of 4 nm. Heat transport is mostly controlled by surface scattering: rough layers of native oxide at surfaces limit the mean free path of thermal phonons below 100 nm. Removing the oxide layers by chemical processing allows us to tune the thermal conductivity over 1 order of magnitude. Our results guide materials design for future phononic applications, setting the length scale at which nanostructuring affects thermal phonons most effectively., This work is partly funded by the European Commission FP7-ENERGY-FET project MERGING, NMP QUANTIHEAT and ICT NANOTHERM, with Grant Agreement Nrs: 309150, 604668 and 318117, respectively. S.N. and D.D. acknowledge financial support from MPG under the MPRG program. J.S.R., M.R.W., and C.M.S.T. acknowledge support form the Spanish MINECO projects TAPHOR (MAT-2012-31392) and nanoTHERM (CONSOLIDER CSD2010-00044). M.R.W. acknowledges support of the Marie Curie Postdoctoral Fellowship HeatProNano (Grant No. 628197). M.P. and A.S. acknowledge funding from the Academy of Finland (Grant No. 252598)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Measurement and modeling of the effective thermal conductivity of sintered silver pastes

  • Ordonez-Miranda, Jose
  • Reparaz, J. S.
  • Wagner, M. R.
  • Sledzinska, Marianna
  • Gomis-Bresco, J.
  • Sotomayor Torres, C. M.
et al., The effective thermal conductivity of sintered porous pastes of silver is modeled through two theoretical methods and measured by means of three experimental techniques. The first model is based on the differential effective medium theory and provides a simple analytical description considering the air pores like ellipsoidal voids of different sizes, while the second one arises from the analysis of the scanning-electron-microscope images of the paste cross-sections through the finite element method. The predictions of both approaches are consistent with each other and show that the reduction of the thermal conductivity of porous pastes can be minimized with spherical pores and maximized with pancake-shaped ones, which are the most efficient to block the thermal conducting pathways. A thermal conductivity of 151.6 W/m K is numerically determined for a sintered silver sample with 22% of porosity. This thermal conductivity agrees quite well with the one measured by the Lateral Thermal Interface Material Analysis for a suspended sample and matches, within an experimental uncertainty smaller than 16%, with the values obtained by means of Raman thermometry and the 3u technique, for two samples buried in a silicon chip. The consistence between our theoretical and experimental results demonstrates the good predictive performance of our theoretical models to describe the thermal behavior of porous thermal interface materials and to guide their engineering with a desired thermal conductivity., This work was supported by the NANOTHERM project co-funded by the European Commission under the “Information and Communication Technologies”, Seven Framework Program, and the Grant Agreement No 318117., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis doctoral (DoctoralThesis)

Modeling and analysis of thermoelectric energy conversion efficiency in nanostructures

  • Yang, Kaike
A thesis submitted in partial fulfillment for the degree of Doctor of Philosophy in the Faculty of Physics and Materials Science., [EN]: Recently, nanostructured materials are received tremendous research interests because of their exceptional properties and great potential in applications. In this thesis, we investigated the thermoelectric transport properties of Si and Ge nanomembranes and nanowires as well as silica nanoclusters by using density functional theory calculations combined with Landauer-Büttiker formalism in the linear response regime. We also investigated the thermoelectric coeficients for quantum devices in the Coulomb blockade regime., [ES]: Recientemente, los materiales nanoestructurados han recibido un gran interés por sus excepcionales propiedades y su enorme potencial para aplicaciones. En esta tesis investigamos las propiedades de transporte termoeléctrico de nanomembranas y nanohilos de Si y el Ge así como nanoclusters de silicio utilizando cálculos de teoría del funcional de la densidad combinados con el formalismo Landauer-Büttiker en régimen de respuesta lineal. También investigamos los coeficientes termoeléctricos para dispositivos cuánticos en régimen Coulomb blockade., I would also like to thank the financial support of the consolider nanoTHERM project, the ERC project, the GC Grupos Consolidados project, the AIRFORCE project, and the Basque government., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Tuning Thermal Transport in Ultrathin Silicon Membranes by Surface Nanoscale Engineering

  • Neogi, Sanghamitra
  • Reparaz, Juan Sebastián|||0000-0001-9679-0075
  • Pereira, Luiz Felipe C.
  • Graczykowski, Bartlomiej|||0000-0003-4787-8622
  • Wagner, Markus R.|||0000-0002-7367-5629
  • Sledzinska, Marianna|||0000-0001-8592-1121
  • Shchepetov, Andrey
  • Prunnila, Mika
  • Ahopelto, Jouni|||0000-0003-3372-6097
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
  • Donadio, Davide|||0000-0002-2150-4182
A detailed understanding of the connections of fabrication and processing to structural and thermal properties of low-dimensional nanostructures is essential to design materials and devices for phononics, nanoscale thermal management, and thermoelectric applications. Silicon provides an ideal platform to study the relations between structure and heat transport since its thermal conductivity can be tuned over 2 orders of magnitude by nanostructuring. Combining realistic atomistic modeling and experiments, we unravel the origin of the thermal conductivity reduction in ultrathin suspended silicon membranes, down to a thickness of 4 nm. Heat transport is mostly controlled by surface scattering: rough layers of native oxide at surfaces limit the mean free path of thermal phonons below 100 nm. Removing the oxide layers by chemical processing allows us to tune the thermal conductivity over 1 order of magnitude. Our results guide materials design for future phononic applications, setting the length scale at which nanostructuring affects thermal phonons most effectively.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A novel contactless technique for thermal field mapping and thermal conductivity determination, two-laser Raman thermometry

  • Reparaz, Juan Sebastián|||0000-0001-9679-0075
  • Chávez Ángel, Emigdio|||0000-0002-9783-0806
  • Wagner, Markus R.|||0000-0002-7367-5629
  • Graczykowski, Bartlomiej|||0000-0003-4787-8622
  • Gomis-Bresco, Jordi|||0000-0002-6066-7064
  • Alzina, Francesc|||0000-0002-7082-0624
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
We present a novel contactless technique for thermal conductivity determination and thermal field mapping based on creating a thermal distribution of phonons using a heating laser, while a second laser probes the local temperature through the spectral position of a Raman active mode. The spatial resolution can be as small as 300 nm, whereas its temperature accuracy is ±2 K. We validate this technique investigating the thermal properties of three free-standing single crystalline Si membranes with thickness of 250, 1000, and 2000 nm. We show that for two-dimensional materials such as free-standing membranes or thin films, and for small temperature gradients, the thermal field decays as T(r) ∝ ln(r) in the diffusive limit. The case of large temperature gradients within the membranes leads to an exponential decay of the thermal field, T ∝ exp[ - A·ln(r)]. The results demonstrate the full potential of this new contactless method for quantitative determination of thermal properties. The range of materials to which this method is applicable reaches far beyond the here demonstrated case of Si, as the only requirement is the presence of a Raman active mode.