Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 32
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Sustainable Optimal Strategic Planning for Shale Water Management

  • Carrero-Parreño, Alba
  • Ruiz-Femenia, Rubén
  • Caballero, José A.
  • Labarta, Juan A.
  • Grossmann, Ignacio E.
  • Caballero, José A.|||/items/0b1eee1e-07bb-4833-80b0-a697525119aa
  • Labarta, Juan A.|||/items/d90ca80b-62a8-4717-af5f-1e651b3d7bac
  • Ruiz-Femenia, Rubén|||/items/683ccf87-4e50-4796-8968-7b489c75cad8
In this work, we introduce a non-convex MINLP optimization model for water management in shale gas production. The superstructure includes: reuse/recycle in the same or neighboring wellpad, treatment in mobile units or in centralized water treatment (CWT) facility, or transport to Class II disposal wells. We consider four different water qualities: flowback water, impaired water, desalinated water and freshwater. Additionally, water blending ratios are unrestricted and friction reducers expenses are calculated accounting for impaired water contamination. The objective is to optimize the fracturing schedule, the number of tanks needed in each time period, flowback destination (reuse, treated or disposal), and fracturing fluid composition by maximizing the “sustainability profit” (Zore et al., 2017). The problem is tackled in two steps. First, we solve an MILP model based on McCormick relaxations. Second, a smaller MINLP is solved in which some binary variables are fixed. The capabilities of the proposed mathematical model are validated against long-time horizon scenario from historical data of the Marcellus Shale play.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Shale gas flowback water desalination: Single vs multiple-effect evaporation with vapor recompression cycle and thermal integration

  • Onishi, Viviani C.
  • Carreño-Parreño, Alba
  • Labarta, Juan A.
  • Ruiz-Femenia, Rubén
  • Salcedo Díaz, Raquel
  • Fraga, Eric S.
  • Caballero, José A.
  • Caballero, José A.|||/items/0b1eee1e-07bb-4833-80b0-a697525119aa
  • Labarta, Juan A.|||/items/d90ca80b-62a8-4717-af5f-1e651b3d7bac
  • Ruiz-Femenia, Rubén|||/items/683ccf87-4e50-4796-8968-7b489c75cad8
  • Salcedo Díaz, Raquel|||/items/4d7bda9d-94af-448a-b11e-6dd32db75515
This paper introduces a new optimization model for the single and multiple-effect evaporation (SEE/MEE) systems design, including vapor recompression cycle and thermal integration. The SEE/MEE model is specially developed for shale gas flowback water desalination. A superstructure is proposed to solve the problem, comprising several evaporation effects coupled with intermediate flashing tanks that are used to enhance thermal integration by recovering condensate vapor. Multistage equipment with intercooling is used to compress the vapor formed by flashing and evaporation. The compression cycle is driven by electricity to operate on the vapor originating from the SEE/MEE system, providing all the energy needed in the process. The mathematical model is formulated as a nonlinear programming (NLP) problem optimized under GAMS software by minimizing the total annualized cost. The SEE/MEE system application for zero liquid discharge (ZLD) is investigated by allowing brine salinity discharge near to salt saturation conditions. Additionally, sensitivity analysis is carried out to evaluate the optimal process configuration and performance under distinct feed water salinity conditions. The results highlight the potential of the proposed model to cost-effectively optimize SEE/MEE systems by producing fresh water and reducing brine discharges and associated environmental impacts.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Combining Forward and Reverse Osmosis for shale gas wastewater treatment to minimize cost and freshwater consumption

  • Salcedo Díaz, Raquel
  • Ruiz-Femenia, Rubén
  • Carrero-Parreño, Alba
  • Onishi, Viviani C.
  • Labarta, Juan A.
  • Caballero, José A.
  • Caballero, José A.|||/items/0b1eee1e-07bb-4833-80b0-a697525119aa
  • Labarta, Juan A.|||/items/d90ca80b-62a8-4717-af5f-1e651b3d7bac
  • Ruiz-Femenia, Rubén|||/items/683ccf87-4e50-4796-8968-7b489c75cad8
  • Salcedo Díaz, Raquel|||/items/4d7bda9d-94af-448a-b11e-6dd32db75515
Shale gas production requires significant water demand for well exploitation and a great volume of wastewater is generated since nearly 70 % of the drilling water returns to the surface [1], as flowback water (FBW) and produced water (PW), with different salinities. Their treatment has a double benefit: treated water can replace freshwater (FW) and besides waste volumes are reduced. Conventional desalination technologies can be appropriate for FBW but not for the hypersaline PW. Forward Osmosis (FO) is a promising alternative to deal with PW which can be used as a standalone desalination process or as an advanced pretreatment for other technologies [2]. In this work, we propose a superstructure that combines FO with Reverse Osmosis (RO). Its objective is twofold: to minimize FW consumption in well exploitation as well as the volume of final waste. The superstructure comprises a RO unit; two FO units; and mixers and splitters allowing connections between the units. In the figure, the FO1 and FO2 units act as pretreatments for the RO and as waste concentrators aiming for zero liquid discharge (ZLD). In the F01 unit, FBW is diluted and the sludge from the previous pretreatment (where other contaminants apart from Total Dissolved Solids (TDS) are removed) becomes concentrated. In the FO2 unit, the PW is diluted and the brine from the RO unit becomes concentrated. We formulated a bi-objective NonLinear Programming (NLP) problem that aims simultaneously to minimize the specific total cost ($/m3 drilling water) and the FW consumption (m3). The proposed approach is applied to a case study that uses 8500 m3/day of drilling water. The solution shows the trade-off between the cost and FW consumption and highlights the potential of FO to offer a solution for the treatment of the hypersaline PW and simultaneously reduce the shale gas waste volume.
RUA. Repositorio Institucional de la Universidad de Alicante
Software de investigación Software (Software)

Shale Gas Water Management Optimization: Graphical User Interface (GUI)

  • Caballero, José A.
  • Labarta, Juan A.
  • Caballero, José A.|||/items/0b1eee1e-07bb-4833-80b0-a697525119aa
  • Labarta, Juan A.|||/items/d90ca80b-62a8-4717-af5f-1e651b3d7bac
This software is a graphical user interface for the optimal Shale Gas Water Management. it is a simplified version of the model presented in the paper «A. Carrero-Parreño, J.A. Reyes-Labarta, R. Salcedo-Díaz, R. Ruiz-Femenia, V.C. Onishi, J.A. Caballero, I.E. Grossmann, Holistic Planning Model for Sustainable Water Management in the Shale Gas Industry, Ind. Eng. Chem. Res. 57 (2018) 13131–13143. doi:10.1021/acs.iecr.8b02055.».
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Analyzing optimization results by using a pre-programmed GUI. Case of study: Optimization of sustainable water management in the shale gas production, Water Management GUI

  • Caballero, José A.
  • Labarta, Juan A.
  • Salcedo Díaz, Raquel
  • Ruiz-Femenia, Rubén
  • Caballero, José A.|||/items/0b1eee1e-07bb-4833-80b0-a697525119aa
  • Labarta, Juan A.|||/items/d90ca80b-62a8-4717-af5f-1e651b3d7bac
  • Ruiz-Femenia, Rubén|||/items/683ccf87-4e50-4796-8968-7b489c75cad8
  • Salcedo Díaz, Raquel|||/items/4d7bda9d-94af-448a-b11e-6dd32db75515
To help students, teachers, and researchers in the task of analyzing optimization results in a very easy way, a graphical user interface (GUI) developed in MatLab®, for the optimal Shale Gas Water Management including economic and environmental impacts by using the “sustainability profit” [1-4], publicly available online in the Institutional Repository of the University of Alicante (RUA, https://rua.ua.es/), can be used as friendly teaching tool. This tool allows the definition of different options in order to analyze the effect in the optimal solution obtained, to address water planning decisions. The model used is a simplified version of the non-convex disjunctive MINLP model presented previously in the paper «Holistic Planning Model for Sustainable Water Management in the Shale Gas Industry» [2, 4], to maximize the “sustainability profit” determining flowback destination (reuse, degree of treatment or disposal), the fracturing schedule, fracturing fluid composition and the number of water storage tanks needed at each period of time. The model includes the effect of high concentration of total dissolved solids (TDS), and its variation over time. The superstructure defined allows different options for wastewater management: a) direct reuse; b) treatment (including possible different pre-treatments, softening and desalination technologies; and c) send to disposal sites. Another example of successful use of MatLab@ graphical user interfaces in Chemical Engineering teaching and researching, is for instance, the Topological and Thermodynamic Analysis of Phase Equilibria [5-8]. References [1] J.A. Caballero, J.A. Labarta. RUA 2018: http://hdl.handle.net/10045/81908. [2] A. Carrero-Parreño, J.A. Labarta, R. Salcedo-Díaz, R. Ruiz-Femenia, V.C. Onishi, J.A. Caballero, I.E. Grossmann, Ind. Eng. Chem. Res. 2018, 57 13131-13143. https://doi.org/10.1021/acs.iecr.8b02055. [3] A. Carrero-Parreño. RUA 2018: http://hdl.handle.net/10045/102228. [4] Zore, Ž.; Čuček, L.; Kravanja, Z. Comput. Chem. Eng. 2017, 102, 139. doi: https://doi.org/10.1016/j.compchemeng.2016.12.003. [5] J.A. Labarta, 2023. https://zenodo.org/records/7628814. [6] A. Marcilla, J.A. Labarta, M.M Olaya, 2017, Fluid Phase Equilibria. 433, 243-252. https://doi.org/10.1016/j.fluid.2016.11.009. [7] J.A. Labarta, M.M. Olaya, A. Marcilla, 2022, AIChE Journal, 68(10), e17805. doi: https://doi.org/10.1002/aic.17805. [8] J.A. Labarta, J.A. Caballero, A. Marcilla, 2023, Computer Aided Chemical Engineering, 52, 3457-3462. https://doi.org/10.1016/B978-0-443-15274-0.50552-7 (RUA: http://rua.ua.es/dspace/handle/10045/134753).
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Optimization of multistage membrane distillation system for treating shale gas produced water

  • Carrero-Parreño, Alba
  • Onishi, Viviani C.
  • Ruiz-Femenia, Rubén
  • Salcedo Díaz, Raquel
  • Caballero, José A.
  • Labarta, Juan A.
  • Caballero, José A.|||/items/0b1eee1e-07bb-4833-80b0-a697525119aa
  • Labarta, Juan A.|||/items/d90ca80b-62a8-4717-af5f-1e651b3d7bac
  • Ruiz-Femenia, Rubén|||/items/683ccf87-4e50-4796-8968-7b489c75cad8
  • Salcedo Díaz, Raquel|||/items/4d7bda9d-94af-448a-b11e-6dd32db75515
Thermal membrane distillation (MD) is an emerging technology to desalinate high-salinity wastewaters, including shale gas produced water to reduce the corresponding water footprint of fracturing operations. In this work, we introduce a rigorous optimization model with energy recovery for the synthesis of multistage direct contact membrane distillation (DCMD) system. The mathematical model (implemented in GAMS software) is formulated via generalized disjunctive programming (GDP) and mixed-integer nonlinear programming (MINLP). To maximize the total amount of water recovered, the outflow brine is fixed close to salt saturation conditions (300 g·kg−1 water) approaching zero liquid discharge (ZLD). A sensitivity analysis is performed to evaluate the system's behavior under different uncertainty sources such as the heat source availability and inlet salinity conditions. The results emphasize the applicability of this promising technology, especially with low steam cost or waste heat, and reveal variable costs and system configurations depending on inlet conditions. For a produced water salinity ranging from 150 g·kg−1 water to 250 g·kg−1 water based on Marcellus play, an optimal treating cost are between 11.5 and 4.4 US$ m−3 is obtained when using low-cost steam. This cost can decrease to 2.8 US$ m−3 when waste heat from shale gas operations is used.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Holistic Planning Model for Sustainable Water Management in the Shale Gas Industry

  • Carrero-Parreño, Alba
  • Labarta, Juan A.
  • Salcedo Díaz, Raquel
  • Ruiz-Femenia, Rubén
  • Onishi, Viviani C.
  • Caballero, José A.
  • Grossmann, Ignacio E.
  • Caballero, José A.|||/items/0b1eee1e-07bb-4833-80b0-a697525119aa
  • Labarta, Juan A.|||/items/d90ca80b-62a8-4717-af5f-1e651b3d7bac
  • Ruiz-Femenia, Rubén|||/items/683ccf87-4e50-4796-8968-7b489c75cad8
  • Salcedo Díaz, Raquel|||/items/4d7bda9d-94af-448a-b11e-6dd32db75515
To address water planning decisions in shale gas operations, we present a novel water management optimization model that explicitly takes into account the effect of high concentrations of total dissolved solids (TDS) and temporal variations in the impaired water. The model comprises different water management strategies: (a) direct wastewater reuse, which is possible because of new additives tolerant to high TDS concentrations but at the expense of increasing the costs; (b) wastewater treatment, separately taking into account pretreatment, softening, and desalination technologies; and (c) the use of Class II disposal sites. The objective is to maximize the “sustainability profit” by determining the flowback destination (reuse, degree of treatment, or disposal), the fracturing schedule, the fracturing-fluid composition, and the number of water-storage tanks needed for each period of time. Because of the rigorous determination of TDS in all water streams, the model is a nonconvex MINLP model that is tackled in two steps: first, an MILP model is solved on the basis of McCormick relaxations; next, the binary variables that determine the fracturing schedule are fixed, and a smaller MINLP is solved. Finally, several case studies based on Marcellus Shale Play are optimized to illustrate the effectiveness of the proposed formulation. The model identifies direct reuse as the best water-management option to improve both economic and environmental criteria.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Water Management in Shale Gas: A Perspective from the Cooperative Games Theory

  • Ruiz-Femenia, Rubén
  • Salcedo Díaz, Raquel
  • Caballero, José A.
  • Caballero, José A.|||/items/0b1eee1e-07bb-4833-80b0-a697525119aa
  • Ruiz-Femenia, Rubén|||/items/683ccf87-4e50-4796-8968-7b489c75cad8
  • Salcedo Díaz, Raquel|||/items/4d7bda9d-94af-448a-b11e-6dd32db75515
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Optimal Pretreatment System of Flowback Water from Shale Gas Production

  • Carrero-Parreño, Alba
  • Onishi, Viviani C.
  • Salcedo Díaz, Raquel
  • Ruiz-Femenia, Rubén
  • Fraga, Eric S.
  • Caballero, José A.
  • Labarta, Juan A.
  • Caballero, José A.|||/items/0b1eee1e-07bb-4833-80b0-a697525119aa
  • Labarta, Juan A.|||/items/d90ca80b-62a8-4717-af5f-1e651b3d7bac
  • Ruiz-Femenia, Rubén|||/items/683ccf87-4e50-4796-8968-7b489c75cad8
  • Salcedo Díaz, Raquel|||/items/4d7bda9d-94af-448a-b11e-6dd32db75515
Shale gas has emerged as a potential resource to transform the global energy market. Nevertheless, gas extraction from tight shale formations is only possible after horizontal drilling and hydraulic fracturing, which generally demand large amounts of water. Part of the ejected fracturing fluid returns to the surface as flowback water, containing a variety of pollutants. For this reason, water reuse and water recycling technologies have received further interest for enhancing overall shale gas process efficiency and sustainability. Water pretreatment systems (WPSs) can play an important role for achieving this goal. This paper introduces a new optimization model for WPS simultaneous synthesis, especially developed for flowback water from shale gas production. A multistage superstructure is proposed for the optimal WPS design, including several water pretreatment alternatives. The mathematical model is formulated via generalized disjunctive programming (GDP) and solved by re-formulation as a mixed-integer nonlinear programming (MINLP) problem, to minimize the total annualized cost. Hence, the superstructure allows identifying the optimal pretreatment sequence with minimum cost, according to inlet water composition and wastewater-desired destination (i.e., water reuse as fracking fluid or recycling). Three case studies are performed to illustrate the applicability of the proposed approach under specific composition constraints. Thus, four distinct flowback water compositions are evaluated for the different target conditions. The results highlight the ability of the developed model for the cost-effective WPS synthesis, by reaching the required water compositions for each specified destination.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Zero-Liquid Discharge Desalination of Hypersaline Shale Gas Wastewater: Challenges and Future Directions

  • Onishi, Viviani C.
  • Labarta, Juan A.
  • Caballero, José A.
  • Caballero, José A.|||/items/0b1eee1e-07bb-4833-80b0-a697525119aa
  • Labarta, Juan A.|||/items/d90ca80b-62a8-4717-af5f-1e651b3d7bac
Unconventional natural gas extraction from tight shale reservoirs, or shale gas, has recently emerged as an attractive energy resource to face the rising worldwide demand. Over the past decade, advanced technologies of horizontal drilling and hydraulic fracturing (“fracking”) have allowed the economic viability of shale gas exploration from rather unattainable deposits. Apart from optimistic growth projections, shale gas production is also responsible for worrying environmental and social implications, which are related, among others, to elevated freshwater consumption and hazardous wastewater generation. Within this framework, the ability of zero-liquid discharge desalination to promote water reuse and/or water recycling is critical for shale gas industry. Hence, application of effective desalination processes is mandatory to treat the large amounts of polluting hypersaline wastewater, alleviating environmental and public health impacts and enhancing overall shale gas process sustainability. This work outlines the challenges and future directions for ZLD desalination of shale gas wastewater.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Desalination of Shale Gas Wastewater: Thermal and Membrane Applications for Zero-Liquid Discharge

  • Onishi, Viviani C.
  • Fraga, Eric S.
  • Labarta, Juan A.
  • Caballero, José A.
  • Caballero, José A.|||/items/0b1eee1e-07bb-4833-80b0-a697525119aa
  • Labarta, Juan A.|||/items/d90ca80b-62a8-4717-af5f-1e651b3d7bac
Natural gas exploration from unconventional shale formations, known as “shale gas,” has recently arisen as an appealing energy supply to meet the increasing worldwide demand. During the last decade, development of horizontal drilling and hydraulic fracturing (“fracking”) technologies have allowed the cost-effective gas exploration from previously inaccessible shale deposits. In spite of optimistic expansion projections, natural gas production from tight shale formations has social and environmental implications mainly associated with the depletion of freshwater resources and polluting wastewater generation. In this context, the capability of desalination technologies to allow water recycling and/or water reuse is crucial for the shale gas industry. Advances in zero-liquid discharge (ZLD) desalination processes for treating hypersaline shale gas wastewater can play a key role in the mitigation of public health and environmental impacts, and in the improvement of overall process sustainability. This chapter outlines the most promising thermal- and membrane-based alternatives for ZLD desalination of shale gas wastewater.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Combining Forward and Reverse Osmosis for Shale Gas Wastewater Treatment to Minimize Cost and Freshwater Consumption

  • Salcedo Díaz, Raquel
  • Ruiz-Femenia, Rubén
  • Carrero-Parreño, Alba
  • Onishi, Viviani C.
  • Labarta, Juan A.
  • Caballero, José A.
  • Caballero, José A.|||/items/0b1eee1e-07bb-4833-80b0-a697525119aa
  • Labarta, Juan A.|||/items/d90ca80b-62a8-4717-af5f-1e651b3d7bac
  • Ruiz-Femenia, Rubén|||/items/683ccf87-4e50-4796-8968-7b489c75cad8
  • Salcedo Díaz, Raquel|||/items/4d7bda9d-94af-448a-b11e-6dd32db75515
One of the challenges for the future of the shale gas production industry is the water management due to the large demand of water for wells drilling and fracturing and the high volumes of liquid effluent produced. On-site treatment is a convenient option for the reuse of the shale wastewater as drilling water for subsequent wells, which simultaneously reduces the freshwater consumption and the waste volume. While conventional desalination technologies are suitable for the treatment of flowback water, they are not appropriate for the hypersaline produced water, which is typically disposed into underground injection wells. In this work, we propose a mathematical model to address the optimal design of an on-site treatment for both flowback and produced waters, combining reverse and forward osmosis, to simultaneously minimize the freshwater consumption and the specific cost of the fracturing water. The results obtained show a clear trade-off between both objectives and highlight the potential of the proposed technology combination to give an environmentally friendly solution to the shale gas produced water.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Optimal Shale Gas Flowback Water Desalination under Correlated Data Uncertainty

  • Onishi, Viviani C.
  • Ruiz-Femenia, Rubén
  • Salcedo Díaz, Raquel
  • Carrero-Parreño, Alba
  • Labarta, Juan A.
  • Caballero, José A.
  • Caballero, José A.|||/items/0b1eee1e-07bb-4833-80b0-a697525119aa
  • Labarta, Juan A.|||/items/d90ca80b-62a8-4717-af5f-1e651b3d7bac
  • Ruiz-Femenia, Rubén|||/items/683ccf87-4e50-4796-8968-7b489c75cad8
  • Salcedo Díaz, Raquel|||/items/4d7bda9d-94af-448a-b11e-6dd32db75515
Optimal flowback water desalination is critical to improve overall efficiency and sustainability of shale gas production. Nonetheless, great uncertainty in well data from shale plays strongly hinders the design task. In this work, we introduce a new stochastic multiscenario optimization model for the robust design of desalination systems under uncertainty. A zero-liquid discharge (ZLD) system composed by multiple-effect evaporation with mechanical vapor recompression (MEE-MVR) is proposed for the desalination of high-salinity shale gas flowback water. Salinity and flowrate of flowback water are both considered as uncertain design parameters, which are described by correlated scenarios with given probability of occurrence. The set of scenarios is generated via Monte Carlo sampling technique from a multivariate normal distribution. ZLD operation is ensured by the design constraint that allows brine concentration near to salt saturation conditions for all scenarios. The stochastic multiscenario nonlinear programming (NLP) model is optimized in GAMS, through the minimization of the expected total annualized cost. Risk analysis based on cumulative probability curves is performed in the uncertain search space, to support decision-makers towards the selection of more robust ZLD desalination systems applied to shale gas flowback water.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Thermo-economic and environmental optimization of a solar-driven zero-liquid discharge system for shale gas wastewater desalination

  • Onishi, Viviani C.
  • Khoshgoftar Manesh, Mohammad H.
  • Salcedo Díaz, Raquel
  • Ruiz-Femenia, Rubén
  • Labarta, Juan A.
  • Caballero, José A.
  • Caballero, José A.|||/items/0b1eee1e-07bb-4833-80b0-a697525119aa
  • Labarta, Juan A.|||/items/d90ca80b-62a8-4717-af5f-1e651b3d7bac
  • Ruiz-Femenia, Rubén|||/items/683ccf87-4e50-4796-8968-7b489c75cad8
  • Salcedo Díaz, Raquel|||/items/4d7bda9d-94af-448a-b11e-6dd32db75515
Wastewater management is one of the main hurdles encountered by the shale gas industry for boosting overall process cost-effectiveness while reducing environmental impacts. In this light, this paper introduces a new multi-objective model for the thermo-economic and environmental optimization of solar-based zero-liquid discharge (ZLD) desalination systems. The solar-driven ZLD system is especially developed for desalinating high-salinity wastewaters from shale gas process. A decentralized system is proposed, encompassing a solar thermal system, a Rankine power cycle, and a multiple-effect evaporator combined with mechanical vapor recompression. The environment-friendly ZLD operation is ensured by specifying the salt concentration of brine discharges close to saturation conditions. The mathematical modelling approach is centered on a multi-objective non-linear programming (MoNLP) formulation, which is aimed at simultaneously minimizing thermo-economic and environmental objective functions. The latter objective function is quantified by the ReCiPe methodology based on life cycle assessment. The MoNLP model is implemented in GAMS software, and solved through the epsilon-constraint method. A set of trade-off Pareto-optimal solutions is presented to support decision-makers towards implementing more sustainable and cost-efficient solar-driven ZLD desalination systems. The comprehensive energy, economic and environmental analysis reveals that the innovative system significantly decreases costs and environmental impacts in shale gas wastewater operations.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Robust Stochastic-Fuzzy Modelling Approach for Shale Gas Wastewater Management under Uncertainty

  • Onishi, Viviani C.
  • Labarta, Juan A.
  • Caballero, José A.
  • Antunes, Carlos H.
  • Caballero, José A.|||/items/0b1eee1e-07bb-4833-80b0-a697525119aa
  • Labarta, Juan A.|||/items/d90ca80b-62a8-4717-af5f-1e651b3d7bac
In this work, a new stochastic-fuzzy-based modelling approach is introduced for the robust optimization of shale gas wastewater management under multiple sources of uncertainty. Different management alternatives are considered to deal with the wastewater produced from fracking sites (well pads), including treatment plants—composed by pre-treatment and zero-liquid discharge (ZLD) desalination units—to allow water recycling or internal reuse in shale gas operations, or final disposal in Class II saline water injection wells (i.e., conventional deep-well injection).
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Multistage membrane distillation for the treatment of shale gas flowback water: multiobjective optimization under uncertainty

  • Carrero-Parreño, Alba
  • Onishi, Viviani C.
  • Ruiz-Femenia, Rubén
  • Salcedo Díaz, Raquel
  • Caballero, José A.
  • Labarta, Juan A.
  • Caballero, José A.|||/items/0b1eee1e-07bb-4833-80b0-a697525119aa
  • Labarta, Juan A.|||/items/d90ca80b-62a8-4717-af5f-1e651b3d7bac
  • Ruiz-Femenia, Rubén|||/items/683ccf87-4e50-4796-8968-7b489c75cad8
  • Salcedo Díaz, Raquel|||/items/4d7bda9d-94af-448a-b11e-6dd32db75515
In this work, we analyze the effect of shale gas well data uncertainty on the multiobjective optimization of a multistage direct contact membrane distillation (DCMD) model. The uncertain parameters, flowrate and salt concentration of the flowback water, are modelled by a set of correlated scenarios. A bi-criterion stochastic MINLP was formulated to minimize the expected total annual cost (TAC) and its variability, controlled by the worst case (WC) risk management metric. The model was solved using a modified version of the sample average approximation (SAA) algorithm, which decomposes the original problem into two: a deterministic MINLP model and a stochastic NLP model. The solution is a set of Pareto curves, where the two global extreme solutions provide the DCMD designs that achieve the minimum expected TAC and the minimum WC, respectively. Furthermore, both designs are able to satisfy the zero liquid discharge (ZLD) requirement imposed in the outflow stream.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Multi-Objective Optimization of Renewable Energy-Driven Desalination Systems

  • Onishi, Viviani C.
  • Ruiz-Femenia, Rubén
  • Salcedo Díaz, Raquel
  • Carrero-Parreño, Alba
  • Labarta, Juan A.
  • Caballero, José A.
  • Caballero, José A.|||/items/0b1eee1e-07bb-4833-80b0-a697525119aa
  • Labarta, Juan A.|||/items/d90ca80b-62a8-4717-af5f-1e651b3d7bac
  • Ruiz-Femenia, Rubén|||/items/683ccf87-4e50-4796-8968-7b489c75cad8
  • Salcedo Díaz, Raquel|||/items/4d7bda9d-94af-448a-b11e-6dd32db75515
Environmental impacts related to increasing greenhouse gas emissions and depletion of fossil-fuel reserves and water resources are major global concerns. In this work, we introduce a new multi-objective optimization model for simultaneous synthesis of zero-emission desalination plants driven by renewable energy. The system is particularly developed for zero-liquid discharge (ZLD) desalination of high-salinity shale gas wastewater, aiming to enhance economic and environmental system performance. The mathematical model is based on a multistage superstructure, which integrates a solar assisted Rankine cycle to a multiple-effect evaporation with mechanical vapor recompression (MEE-MVR) plant. For achieving the goal of more sustainable ZLD process, we specify the discharge brine salinity near to salt saturation conditions. The model is formulated as a multi-objective multiperiod non-linear programming (NLP) problem. The model is implemented in GAMS and solved via epsilon-constraint method, through the minimization of total annualized cost and environmental impacts. The economic objective function accounts for capital cost of investment and operational expenses, while environmental criteria are quantified by the life cycle assessment (LCA)-based ReCiPe methodology. A case study is performed to demonstrate the capabilities of the developed model. The obtained set of trade-off Pareto-optimal solutions reveals that integration of renewable energy generation to ZLD desalination plants can lead to significant cost and environmental savings for shale gas industry.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Wastewater Management in Shale Gas Industry: Alternatives for Water Reuse and Recycling, Challenges and Perspectives

  • Onishi, Viviani C.
  • Labarta, Juan A.
  • Caballero, José A.
  • Antunes, Carlos H.
  • Caballero, José A.|||/items/0b1eee1e-07bb-4833-80b0-a697525119aa
  • Labarta, Juan A.|||/items/d90ca80b-62a8-4717-af5f-1e651b3d7bac
Wastewater management is nowadays one of the major concerns faced by the shale gas industry to improve its cost-effectiveness, while preserving the human health and environment. Horizontal drilling and hydraulic fracturing operations usually demand excessive freshwater consumption and generate large wastewater volumes. The highly polluting nature of shale gas wastewater impels the application of energy-intensive pretreatment and desalination, to allow water reuse in hydraulic fracking processes, water recycling or safe discharge. This work aims to offer an overview of main challenges and perspectives of alternatives for water reuse and recycling in shale gas wastewater management.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Desalination of shale gas produced water: A rigorous design approach for zero-liquid discharge evaporation systems

  • Onishi, Viviani C.
  • Carreño-Parreño, Alba
  • Labarta, Juan A.
  • Fraga, Eric S.
  • Caballero, José A.
  • Caballero, José A.|||/items/0b1eee1e-07bb-4833-80b0-a697525119aa
  • Labarta, Juan A.|||/items/d90ca80b-62a8-4717-af5f-1e651b3d7bac
Shale gas has recently emerged as a promising energy source to face the increasing global demand. This paper introduces a new rigorous optimization model for the simultaneous synthesis of single and multiple-effect evaporation (SEE/MEE) systems, considering mechanical vapor recompression (MVR) and energy recovery. The proposed model has been especially developed for the desalination of high-salinity produced water from shale gas hydraulic fracturing (“fracking”). Its main objective is to enhance the system energy efficiency through the reduction of brine discharges. Therefore, the outflow brine salinity should be near to salt saturation conditions to achieve zero liquid discharge (ZLD). The multiple-effect superstructure is comprised by several effects of horizontal-tube falling film evaporation. Due to the inclusion of the electric-driven mechanical compressor, no other external energy source is needed in the SEE/MEE system. A more accurate process design is attained through the calculation of the overall heat transfer coefficients in function of the individual coefficients for the falling boiling film and vapor condensation. Additionally, the SEE/MEE-MVR model allows the estimation of the major geometrical characteristics of the evaporation system. The non-linear programming (NLP)-based model is optimized using the CONOPT solver under GAMS by the minimization of the process total annualized cost. Thermal analysis is carried out to evaluate the effects of the feed salinity and geometrical parameters on system heat transfer performance. The results highlight the ability of the developed model to rigorously design SEE/MEE-MVR systems by improving their cost-effectively and reaching ZLD conditions.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Process optimization for zero-liquid discharge desalination of shale gas flowback water under uncertainty

  • Onishi, Viviani C.
  • Ruiz-Femenia, Rubén
  • Salcedo Díaz, Raquel
  • Carreño-Parreño, Alba
  • Labarta, Juan A.
  • Fraga, Eric S.
  • Caballero, José A.
  • Caballero, José A.|||/items/0b1eee1e-07bb-4833-80b0-a697525119aa
  • Labarta, Juan A.|||/items/d90ca80b-62a8-4717-af5f-1e651b3d7bac
  • Ruiz-Femenia, Rubén|||/items/683ccf87-4e50-4796-8968-7b489c75cad8
  • Salcedo Díaz, Raquel|||/items/4d7bda9d-94af-448a-b11e-6dd32db75515
Sustainable and efficient desalination is required to treat the large amounts of high-salinity flowback water from shale gas extraction. Nevertheless, uncertainty associated with well data (including water flowrates and salinities) strongly hampers the process design task. In this work, we introduce a new optimization model for the synthesis of zero-liquid discharge (ZLD) desalination systems under uncertainty. The desalination system is based on multiple-effect evaporation with mechanical vapor recompression (MEE-MVR). Our main objective is energy efficiency intensification through brine discharge reduction, while accounting for distinct water feeding scenarios. For this purpose, we consider the outflow brine salinity near to salt saturation condition as a design constraint to achieve ZLD operation. In this innovative approach, uncertain parameters are mathematically modelled as a set of correlated scenarios with known probability of occurrence. The scenarios set is described by a multivariate normal distribution generated via a sampling technique with symmetric correlation matrix. The stochastic multiscenario non-linear programming (NLP) model is implemented in GAMS, and optimized by the minimization of the expected total annualized cost. An illustrative case study is carried out to evaluate the capabilities of the proposed new approach. Cumulative probability curves are constructed to assess the financial risk related to uncertain space for different standard deviations of expected mean values. Sensitivity analysis is performed to appraise optimal system performance for distinct brine salinity conditions. This methodology represents a useful tool to support decision-makers towards the selection of more robust and reliable ZLD desalination systems for the treatment of shale gas flowback water.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Shale Water Desalination: Multistage membrane distillation considering different configurations and heat integration

  • Carrero-Parreño, Alba
  • Onishi, Viviani C.
  • Ruiz-Femenia, Rubén
  • Salcedo Díaz, Raquel
  • Caballero, José A.
  • Labarta, Juan A.
  • Caballero, José A.|||/items/0b1eee1e-07bb-4833-80b0-a697525119aa
  • Labarta, Juan A.|||/items/d90ca80b-62a8-4717-af5f-1e651b3d7bac
  • Ruiz-Femenia, Rubén|||/items/683ccf87-4e50-4796-8968-7b489c75cad8
  • Salcedo Díaz, Raquel|||/items/4d7bda9d-94af-448a-b11e-6dd32db75515
This work introduces a simultaneous synthesis of membrane distillation systems with heat exchanger networks (HENs) for desalinating shale gas flowback and produce water. The direct contact and vacuum membrane configurations are the best options for desalination. Moreover, multistage membrane distillation systems usually have higher efficiencies than single-stages processes. For this reason, two different mathematical models for synthetizing multistage direct contact membrane distillation (MSDCMD) and multistage vacuum membrane distillation (MSVMD) are developed and optimized to achieve zero liquid discharge (ZLD) conditions. To this aim, brine discharges are considered to be near to the salt saturation conditions. The multi-stage superstructures are implemented in GAMS and optimized by SBB solver. The mathematical model is formulated via generalized disjunctive programming (GDP) and mixed-integer nonlinear programming (MINLP), to minimize the total annualized cost.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A methodology to detect and locate low-permeability faults to reduce the risk of inducing seismicity of fluid injection operations in deep saline formations

  • Vilarrasa, Víctor
  • Bustarret, Gil
  • Laloui, Lyesse
  • Zeidouni, Mehdi
Fluid injection in the subsurface has significantly increased over the last decades. Since fluid injection causes pressure buildup, reducing effective stresses, shear failure conditions may eventually occur, inducing microseismic and seismic events. Anticipating felt induced earthquakes that may be triggered in undetected faults is crucial for the success of fluid injection projects. We propose a methodology to detect and locate such low-permeability faults to reduce the risk of inducing felt seismic events. The methodology consists in using diagnostic plots to identify the divergence time between the logarithmic derivative of overpressure evolution measured in the field and the one that would correspond to an aquifer including the previously identified heterogeneities. We apply the proposed methodology to water and CO2 injection through a horizontal well in a confined aquifer that has faults parallel to the well. We numerically obtain type curves that allow locating low-permeability faults once the divergence time is determined from the logarithmic derivative of overpressure for both water and CO2 injection. Furthermore, we illustrate how to apply the methodology to detect multiple low-permeability faults. To perform a proper pressure management based on fault stability analysis to minimize the risk of inducing felt seismic events, the proposed methodology should be complemented with other multidisciplinary tools. This methodology can be extended to other geological settings and be used in several fluid injection applications. © 2017 Elsevier Ltd, V.V. acknowledges support from the ‘EPFL Fellows’ fellowship programme co-funded by Marie Curie, FP7 Grant agreement no. 291771. This work was funded in part by the “TRUST” project (European Community’s Seventh Framework Programme FP7/2007-2013 under grant agreement n 309607) and from “FracRisk” project (European Community’s Horizon 2020 Framework Programme H2020-EU.3.3.2.3 under grant agreement n 640979). Technical review comments of Dr. Paul Hsieh (USGS) are greatly appreciated., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of faults on stress path evolution during reservoir pressurization

  • Gheibi, Sohrab
  • Holt, Rune M.
  • Vilarrasa, Víctor
Fluid injection operations, such as CO2 storage and enhanced oil recovery (EOR), imply reservoir pressurization, which changes the effective and total stresses due to poroelastic effects. These stress changes control the geomechanical stability of discontinuities like faults and fractures. Though the effect of these pre-existing discontinuities on stress path is sometimes neglected, the stress state is altered around them. We investigate the effect of a fault on the stress path evolution when pressurizing a reservoir using an in-house hybrid FEM-DEM code called “MDEM”. Simulation results indicate that the stress path is affected by the presence of faults considered to deform elastically, especially in the vicinity of the fault in the reservoir-caprock interfaces. The stress path perturbation is caused by the shear deformation of the fault plane, which is different in the reservoir and the caprock sections. Actually, the magnitude and the extension of the stress path perturbation around a fault become larger for faults with lower shear stiffness. The upper hanging wall and the lower footwall of the fault in the reservoir-caprock interface experience a higher stress path in the horizontal and the vertical directions. Furthermore, the stress paths decrease (negative in the vertical direction) in the upper footwall and the lower hanging wall in the reservoir-caprock interfaces. The fault effect on the stress path increases as the aspect ratio of the reservoir becomes lower. Moreover, the results indicated that both the caprock and the reservoir in the footwall experience a greater change for lower Poisson's ratio of the caprock. These stress changes are independent of the in situ stress regime as long as the fault deforms elastically. However, the impact of the stress path perturbation on the stability of the reservoir and the caprock is different in a compressional (reverse faulting) and an extensional (normal faulting) stress regimes. The stress state becomes less stable in the vicinity of the fault in the reservoir and in the caprock in a compressional stress regime than in an extensional stress regime. Therefore, a compressional stress regime leads to a less stable situation due to the fault effect on the evolution of the stress path. Overall, the presence of faults alters the stress state around them, which may lead to a stress state that is closer to failure conditions than predicted by models that do not explicitly include faults. © 2017 Elsevier Ltd, This publication has been produced with partial support from the BIGCCS Centre, performed under the Norwegian research program Centres for Environment-friendly Energy Research (FME). The first two authors acknowledge the following partners for their contributions: Gassco, Shell, Statoil, TOTAL, ENGIE, and the Research Council of Norway (193816/S60). V.V. acknowledges financial support from the “TRUST” project (European Community's Seventh Framework Programme FP7/2007-2013 under grant agreement no. 309607) and from “FracRisk” project (European Community's Horizon 2020 Framework Programme H2020-EU.3.3.2.3 under grant agreement no. 640979). Authors are also grateful to SINTEF Petroleum Research provding the MDEM code., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Geomechanical analysis of the influence of CO2 injection location on fault stability

  • Vilarrasa, Víctor
  • Makhnenko, Roman Y.
  • Gheibi, Sohrab
Large amounts of carbon dioxide (CO2) should be injected in deep saline formations to mitigate climate change, implying geomechanical challenges that require further understanding. Pressure build-up induced by CO2 injection will decrease the effective stresses and may affect fault stability. Geomechanical effects of overpressure induced by CO2 injection either in the hanging wall or in the foot wall on fault stability are investigated. CO2 injection in the presence of a low-permeable fault induces pressurization of the storage formation between the injection well and the fault. The low permeability of the fault hinders fluid flow across it and leads to smaller overpressure on the other side of the fault. This variability in the fluid pressure distribution gives rise to differential total stress changes around the fault that reduce its stability. Despite a significant pressure build-up induced by the fault, caprock stability around the injection well is not compromised and thus, CO2 leakage across the caprock is unlikely to happen. The decrease in fault stability is similar regardless of the side of the fault where CO2 is injected. Simulation results show that fault core permeability has a significant effect on fault stability, becoming less affected for high-permeable faults. An appropriate pressure management will allow storing large quantities of CO2 without inducing fault reactivation. © 2016 Institute of Rock and Soil Mechanics, Chinese Academy of Sciences, The first author acknowledges the support from the “EPFL Fellows” fellowship program co-funded by Marie Curie, FP7 (Grant No. 291771) and partial support from the “TRUST” project of the European Community's Seventh Framework Programme FP7/2007–2013 (Grant No. 309607) and the “FracRisk” project of the European Community's Horizon 2020 Framework Programme H2020-EU.3.3.2.3 (Grant No. 640979). Activities of the second author are sponsored by SCCER-SoE (Switzerland) (Grant No. KTI.2013.288) and Swiss Federal Office of Energy (SFOE) project CAPROCK (Grant No. 810008154). This publication has also been produced with partial support from the BIGCCS Centre (for the third author), performed under the Norwegian research program Centers for Environment-friendly Energy Research (FME). The third author acknowledges the following partners for their contributions: Gassco, Shell, Statoil, TOTAL, ENGIE, and the Research Council of Norway (193816/S60)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Geologic Carbon Storage for Shale Gas Recovery

  • Molina, Oscar M.
  • Vilarrasa, Víctor
  • Zeidouni, Mehdi
We consider the feasibility of a novel Carbon Capture, Utilization and Storage (CCUS) concept that consists in producing oil and gas from hydrocarbon-rich shales overlying deep saline aquifers that are candidates for CO2 storage. Such geological overlapping between candidate aquifers for CO2 storage and shale plays exists in several sedimentary basins across the continental US. Since CO2 reaches the storage formation at a lower temperature than the in-situ temperature, a thermal stress reduction occurs, which may lead to hydraulic fracturing of the caprock overlying the aquifer. In this work, we use a thermo-hydro-mechanical approach for modelling a caprock-aquifer-baserock system. We show that hydraulic fracturing conditions are induced within the aquifer by thermal stress reduction caused by cooling and that hydraulic fractures eventually propagate into the lower portion of the shale play. Nonetheless, fracture height of penetration in the caprock is considerably short after 10 years of injection, so the overall caprock sealing capacity is maintained. To maximize the benefit of the proposed CCUS method, CO2 injection should be maintained as long as possible to promote the penetration depth of cooling-induced hydraulic fractures into organic-rich shales. Though drilling a horizontal well in the lower portion of the shale to produce hydrocarbons from the induced hydraulic fractures may not be technically feasible, hydrocarbons can still be produced through the injection well. The production of hydrocarbons at the end of the CO2 storage project will partly compensate the costs of CCS operations. © 2017 The Authors., This study was partially supported by the Louisiana Board of Regents — Research Competitiveness Subprogram (RCS) under contract #43950. V.V. acknowledges financial support from the “TRUST" project (European Community's Seventh Framework Programme FP7/2007-2013 under grant agreement n 309607) and from “FracRisk" project (European Community's Horizon 2020 Framework Programme H2020-EU.3.3.2.3 under grant agreement n 640979)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Long-term thermal effects on injectivity evolution during CO2 storage

  • Vilarrasa, Víctor
  • Rinaldi, Antonio Pio
  • Rutqvist, Jonny
Carbon dioxide (CO2) is likely to reach the bottom of injection wells at a colder temperature than that of the storage formation, causing cooling of the rock. This cooling, together with overpressure, tends to open up fractures, which may enhance injectivity. We investigate cooling effects on injectivity enhancement by modeling the In Salah CO2 storage site and a theoretical, long-term injection case. We use stress-dependent permeability functions that predict an increase in permeability as the effective stress acting normal to fractures decreases. Normal effective stress can decrease either due to overpressure or cooling. We calibrate our In Salah model, which includes a fracture zone perpendicular to the well, obtaining a good fitting with the injection pressure measured at KB-502 and the rapid CO2 breakthrough that occurred at the observation well KB-5 located 2 km away from the injection well. CO2 preferentially advances through the fracture zone, which becomes two orders of magnitude more permeable than the rest of the reservoir. Nevertheless, the effect of cooling on the long-term injectivity enhancement is limited in pressure dominated storage sites, like at In Salah, because most of the permeability enhancement is due to overpressure. However, thermal effects enhance injectivity in cooling dominated storage sites, which may decrease the injection pressure by 20%, saving a significant amount of compression energy all over the duration of storage projects. Overall, our simulation results show that cooling has the potential to enhance injectivity in fractured reservoirs. © 2017 Elsevier Ltd, This work was supported by the Assistant Secretary for Fossil Energy, Office of Natural Gas and Petroleum Technology, through the National Energy Technology Laboratory, under the U.S. Department of Energy Contract No. DE-AC02-05CH11231. V. Vilarrasa acknowledges financial support from the “TRUST" project (European Community's Seventh Framework Programme FP7/2007-2013 under grant agreement n. 309607) and from “FracRisk" project (European Community's Horizon 2020 Framework Programme H2020-EU.3.3.2.3 under grant agreement n. 640979). A.P. Rinaldi is currently funded by Swiss National Science Foundation (SNSF) Ambizione Energy grant (PZENP2_160555). The authors would like to thank the In Salah JIP and their partners BP, Statoil, and Sonatrach for providing field data and technical input over the past 10 years as well as for financial support during LBNL's participation in the In Salah JIP, 2011–2013, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Caprock Integrity and Induced Seismicity from Laboratory and Numerical Experiments

  • Vilarrasa, Víctor
  • Makhnenko, Roman Y.
CO2 leakage is a major concern for geologic carbon storage. To assess the caprock sealing capacity and the strength of faults, we test in the laboratory the rock types involved in CO2 storage at representative in-situ conditions. We use the measured parameters as input data to a numerical model that simulates CO2 injection in a deep saline aquifer bounded by a low-permeable fault. We find that the caprock sealing capacity is maintained and that, even if a fault undergoes a series of microseismic events or aseismic slip, leakage is unlikely to occur through ductile clay-rich faults. © 2017 The Authors. Published by Elsevier Ltd., V.V. acknowledges financial support from the “TRUST" project (European Community's Seventh Framework Programme FP7/2007-2013 under grant agreement n. 309607) and from “FracRisk" project (European Community's Horizon 2020 Framework Programme H2020-EU.3.3.2.3 under grant agreement n. 640979). R.M. acknowledges partial support from the Center for Geologic Storage of CO2, an EFRC funded by the U.S. DOE, Office of Science, BES, under Award DE-SC0C12504., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thermal effects on geologic carbon storage

  • Vilarrasa, Víctor
  • Rutqvist, Jonny
One of the most promising ways to significantly reduce greenhouse gases emissions, while carbon-free energy sources are developed, is Carbon Capture and Storage (CCS). Non-isothermal effects play a major role in all stages of CCS. In this paper, we review the literature on thermal effects related to CCS, which is receiving an increasing interest as a result of the awareness that the comprehension of non-isothermal processes is crucial for a successful deployment of CCS projects. We start by reviewing CO2 transport, which connects the regions where CO2 is captured with suitable geostorage sites. The optimal conditions for CO2 transport, both onshore (through pipelines) and offshore (through pipelines or ships), are such that CO2 stays in liquid state. To minimize costs, CO2 should ideally be injected at the wellhead in similar pressure and temperature conditions as it is delivered by transport. To optimize the injection conditions, coupled wellbore and reservoir simulators that solve the strongly non-linear problem of CO2 pressure, temperature and density within the wellbore and non-isothermal two-phase flow within the storage formation have been developed. CO2 in its way down the injection well heats up due to compression and friction at a lower rate than the geothermal gradient, and thus, reaches the storage formation at a lower temperature than that of the rock. Inside the storage formation, CO2 injection induces temperature changes due to the advection of the cool injected CO2, the Joule-Thomson cooling effect, endothermic water vaporization and exothermic CO2 dissolution. These thermal effects lead to thermo-hydro-mechanical-chemical coupled processes with non-trivial interpretations. These coupled processes also play a relevant role in “Utilization” options that may provide an added value to the injected CO2, such as Enhanced Oil Recovery (EOR), Enhanced Coal Bed Methane (ECBM) and geothermal energy extraction combined with CO2 storage. If the injected CO2 leaks through faults, the caprock or wellbores, strong cooling will occur due to the expansion of CO2 as pressure decreases with depth. Finally, we conclude by identifying research gaps and challenges of thermal effects related to CCS. © 2016 Elsevier B.V., V.V. acknowledges financial support from the “TRUST” project (European Commission Seventh Framework Programme FP7/2007–2013 under grant agreement n 309607) and from “FracRisk” project (European Community's Horizon 2020 Framework Programme H2020-EU.3.3.2.3 under grant agreement n 640979). This work was funded in part by the Assistant Secretary for Fossil Energy, National Energy Technology Laboratory, National Risk Assessment Partnership, of the U.S. Department of Energy under Contract No. DEAC02-05CH11231. The authors would like to thank Patricia Lopez for drawing Fig. 1., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Expansion of the ADOR strategy for the synthesis of zeolites: The synthesis of IPC-12 from zeolite UOV

  • Kasneryk, Valeryia
  • Shamzhy, Mariya
  • Opanasenko, Maksym
  • Wheatley, Paul S.
  • Morris, Samuel A.
  • Russell, Samantha E.
  • Mayoral, Álvaro
  • Trachta, Michal
  • Čejka, Jiři
  • Morris, Russell E.
The assembly–disassembly–organization–reassembly (ADOR) process has been used to disassemble a parent zeolite with the UOV structure type and then reassemble the resulting layers into a novel structure, IPC-12. The structure of the material has previously been predicted computationally and confirmed in our experiments using X-ray diffraction and atomic resolution STEM-HAADF electron microscopy. This is the first successful application of the ADOR process to a material with porous layers., R.E.M. thanks the Royal Society and the Engineering and Physical Sciences Research Council (Grants EP/K025112/1, EP/K005499/1, EP/L016419/1) for funding work in this area and for providing a Ph.D. studentship to S.E.R. through the Criticat Centre for Doctoral training. R.E.M. and M.O. acknowledge the OP VVV “Excellent Research Teams”, project No. CZ.02.1.01/0.0/0.0/15_003/0000417—CUCAM. J.Č., V.K., and M.T. acknowledge the Czech Science Foundation for the project of the Centre of Excellence (P106/12/G015) and J.Č has received funding from the European Union's Horizon2020 research and innovation programme under grant agreement No 640979. The research leading to these results has received funding from the European Union Seventh Framework Programme under Grant Agreement No. 312483-ESTEEM2 (Integrated Infrastructure Initiative-I3)., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Thermal effects on geologic carbon storage

  • Vilarrasa Riaño, Víctor|||0000-0003-1169-4469
  • Rutqvist, Jonny
The final publication is available at Springer via http://dx.doi.org/10.1016/j.earscirev.2016.12.011, One of the most promising ways to significantly reduce greenhouse gases emissions, while carbon-free energy sources are developed, is Carbon Capture and Storage (CCS). Non-isothermal effects play a major role in all stages of CCS. In this paper, we review the literature on thermal effects related to CCS, which is receiving an increasing interest as a result of the awareness that the comprehension of non-isothermal processes is crucial for a successful deployment of CCS projects. We start by reviewing CO2 transport, which connects the regions where CO2 is captured with suitable geostorage sites. The optimal conditions for CO2 transport, both onshore (through pipelines) and offshore (through pipelines or ships), are such that CO2 stays in liquid state. To minimize costs, CO2 should ideally be injected at the wellhead in similar pressure and temperature conditions as it is delivered by transport. To optimize the injection conditions, coupled wellbore and reservoir simulators that solve the strongly non-linear problem of CO2 pressure, temperature and density within the wellbore and non-isothermal two-phase flow within the storage formation have been developed. CO2 in its way down the injection well heats up due to compression and friction at a lower rate than the geothermal gradient, and thus, reaches the storage formation at a lower temperature than that of the rock. Inside the storage formation, CO2 injection induces temperature changes due to the advection of the cool injected CO2, the Joule-Thomson cooling effect, endothermic water vaporization and exothermic CO2 dissolution. These thermal effects lead to thermo-hydro-mechanical-chemical coupled processes with non-trivial interpretations. These coupled processes also play a relevant role in “Utilization” options that may provide an added value to the injected CO2, such as Enhanced Oil Recovery (EOR), Enhanced Coal Bed Methane (ECBM) and geothermal energy extraction combined with CO2 storage. If the injected CO2 leaks through faults, the caprock or wellbores, strong cooling will occur due to the expansion of CO2 as pressure decreases with depth. Finally, we conclude by identifying research gaps and challenges of thermal effects related to CCS., Peer Reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Contribución de congreso (ConferenceOutput)

Expansion of the ADOR strategy for the synthesis of new zeolites: the synthesis of IPC-12 from zeolite UOV

  • Kasneryk, V.
  • Shamzh, M.
  • Opanasenko, M.
  • Wheatley, P.S.
  • Morris, S.A.
  • Russell, S.
  • Mayoral, A.
  • Trachta, M.
  • Cejka, J.
  • Morris, R.E.
The assembly–disassembly–organization–reassembly (ADOR) process has been used to disassemble a parent zeolite with the UOV structure type and then reassemble the resulting layers into a novel structure, IPC-12. The structure of the material has previously been predicted computationally and confirmed in our experiments using X-ray diffraction and atomic resolution STEM-HAADF electron microscopy. This is the first successful application of the ADOR process to a material with porous layers.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Thermal effects on geologic carbon storage

  • Vilarrasa Riaño, Víctor
  • Rutqvist, Jonny
The final publication is available at Springer via http://dx.doi.org/10.1016/j.earscirev.2016.12.011, One of the most promising ways to significantly reduce greenhouse gases emissions, while carbon-free energy sources are developed, is Carbon Capture and Storage (CCS). Non-isothermal effects play a major role in all stages of CCS. In this paper, we review the literature on thermal effects related to CCS, which is receiving an increasing interest as a result of the awareness that the comprehension of non-isothermal processes is crucial for a successful deployment of CCS projects. We start by reviewing CO2 transport, which connects the regions where CO2 is captured with suitable geostorage sites. The optimal conditions for CO2 transport, both onshore (through pipelines) and offshore (through pipelines or ships), are such that CO2 stays in liquid state. To minimize costs, CO2 should ideally be injected at the wellhead in similar pressure and temperature conditions as it is delivered by transport. To optimize the injection conditions, coupled wellbore and reservoir simulators that solve the strongly non-linear problem of CO2 pressure, temperature and density within the wellbore and non-isothermal two-phase flow within the storage formation have been developed. CO2 in its way down the injection well heats up due to compression and friction at a lower rate than the geothermal gradient, and thus, reaches the storage formation at a lower temperature than that of the rock. Inside the storage formation, CO2 injection induces temperature changes due to the advection of the cool injected CO2, the Joule-Thomson cooling effect, endothermic water vaporization and exothermic CO2 dissolution. These thermal effects lead to thermo-hydro-mechanical-chemical coupled processes with non-trivial interpretations. These coupled processes also play a relevant role in “Utilization” options that may provide an added value to the injected CO2, such as Enhanced Oil Recovery (EOR), Enhanced Coal Bed Methane (ECBM) and geothermal energy extraction combined with CO2 storage. If the injected CO2 leaks through faults, the caprock or wellbores, strong cooling will occur due to the expansion of CO2 as pressure decreases with depth. Finally, we conclude by identifying research gaps and challenges of thermal effects related to CCS., Peer Reviewed, Postprint (author's final draft)