Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optical analysis of CH3NH3SnxPb1 xI3 absorbers: a roadmap for perovskite-on-perovskite tandem solar cells

  • Anaya, Miguel
  • Correa-Baena, Juan P.
  • Lozano, Gabriel
  • Saliba, Michael
  • Anguita, Pablo
  • Roose, Bart
  • Abate, Antonio
  • Steiner, Ullrich
  • Grätzel, Michael
  • Calvo, Mauricio E.
  • Hagfeldt, Anders
  • Míguez, Hernán
Organic–inorganic perovskite structures in which lead is substituted by tin are exceptional candidates for broadband light absorption. Herein we present a thorough analysis of the optical properties of CH3NH3SnxPb1−xI3 films, providing the field with definitive insights about the possibilities of these materials for perovskite solar cells of superior efficiency. We report a user's guide based on the first set of optical constants obtained for a series of tin/lead perovskite films, which was only possible to measure due to the preparation of optical quality thin layers. According to the Shockley–Queisser theory, CH3NH3SnxPb1−xI3 compounds promise a substantial enhancement of both short circuit photocurrent and power conversion efficiency in single junction solar cells. Moreover, we propose a novel tandem architecture design in which both top and bottom cells are made of perovskite absorbers. Our calculations indicate that such perovskite-on-perovskite tandem devices could reach efficiencies over 35%. Our analysis serves to establish the first roadmap for this type of cells based on actual optical characterization data. We foresee that this study will encourage the research on novel near-infrared perovskite materials for photovoltaic applications, which may have implications in the rapidly emerging field of tandem devices, The research leading to these results has received funding from the European Research Council under the European Union's Seventh Framework Programme (FP7/2007-2013)/ERC grant agreement no. 307081 (POLIGHT), the Spanish Ministry of Economy and Competitiveness under grant MAT2014-54852-R. MA is grateful to “La Caixa” Foundation for its financial support. AA has received funding from the European Union's Seventh Framework Programme for research, technological development and demonstration under grant agreement no 291771. MS is supported by the co-funded Marie Skłodowska Curie fellowship, H2020 grant agreement no. 665667. FESEM characterization was performed at CITIUS, and we are grateful for its support., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Phosphonic anchoring groups in organic dyes for solid-state solar cells

  • Abate, Antonio
  • Pérez-Tejada, Raquel
  • Snaith, Henry J.
  • Franco, Santiago
  • Orduna, Jesús
We report the synthesis and the optoelectronic characterization of three new 4H-pyran-4-ylidene and thiazole derivatives (pyt) as metal-free organic dyes for solid-state dye-sensitized solar cells (DSSCs). We investigate the performance and the long-term stability of devices employing pyt dyes functionalized with carboxylic and phosphonic acids as TiO2 anchoring groups. In contrast to reports on liquid electrolyte DSSCs, we show that solid-state DSSCs prepared with phosphoric pyt derivatives can achieve similar power conversion efficiency to their carboxyl analogues. We make use of the Mott-Schottky analysis and equivalent circuit models to demonstrate that a phosphonic group induces a significant increase in built-in voltage at the TiO2-hole transporter interface, which results in a higher open circuit voltage., AA has received funding from the European Union’s Seventh Framework Programme for research, technological development and demonstration under grant agreement no. 291771. We gratefully acknowledge the financial support from the Spanish Ministry of Science and Innovation, MICINN-FEDER (project CTQ2011-22727) and the Gobierno de Aragón-Fondo Social Europeo (E39). A predoctoral fellowship to RPT (CSIC, JAE 2011) is also acknowledged., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Strength evolution of geomaterials in the octahedral plane under nonisothermal and unsaturated conditions

  • Vilarrasa, Víctor
  • Parisio, Francesco
  • Laloui, Lyesse
Current geomechanical applications imply nonisothermal processes of unsaturated geomaterials, in most cases following stress paths different from the classical triaxial compression often used in laboratory testing. Although the effects of temperature, suction, and stress-path direction (Lode's angle) on the strength of geomaterials have been investigated independently, an integrated analysis combining the three effects has not yet been performed. In this paper, a thermoplastic constitutive model for unsaturated conditions that accounts for the effect of Lode's angle on the strength of geomaterials is presented. The yield surface evolves-shrinking for increasing temperature and expanding for increasing suction-and has its maximum strength for triaxial compression and its minimum for triaxial extension. Examples that can be related to geoenergy applications highlight the importance of accounting for the effects of temperature, suction, and Lode's angle on the evolution of the strength of geomaterials. Numerical results show that not considering these effects may give rise to misleading predictions of the strength of geomaterials. © 2017 American Society of Civil Engineers., V.V. acknowledges support from the ‘EPFL Fellows’ fellowship programme co-funded by Marie Curie, FP7 Grant agreement no. 291771. We would also like to acknowledge financial support from NAGRA (Swiss National Cooperative for the Disposal of Radioactive Waste)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A methodology to detect and locate low-permeability faults to reduce the risk of inducing seismicity of fluid injection operations in deep saline formations

  • Vilarrasa, Víctor
  • Bustarret, Gil
  • Laloui, Lyesse
  • Zeidouni, Mehdi
Fluid injection in the subsurface has significantly increased over the last decades. Since fluid injection causes pressure buildup, reducing effective stresses, shear failure conditions may eventually occur, inducing microseismic and seismic events. Anticipating felt induced earthquakes that may be triggered in undetected faults is crucial for the success of fluid injection projects. We propose a methodology to detect and locate such low-permeability faults to reduce the risk of inducing felt seismic events. The methodology consists in using diagnostic plots to identify the divergence time between the logarithmic derivative of overpressure evolution measured in the field and the one that would correspond to an aquifer including the previously identified heterogeneities. We apply the proposed methodology to water and CO2 injection through a horizontal well in a confined aquifer that has faults parallel to the well. We numerically obtain type curves that allow locating low-permeability faults once the divergence time is determined from the logarithmic derivative of overpressure for both water and CO2 injection. Furthermore, we illustrate how to apply the methodology to detect multiple low-permeability faults. To perform a proper pressure management based on fault stability analysis to minimize the risk of inducing felt seismic events, the proposed methodology should be complemented with other multidisciplinary tools. This methodology can be extended to other geological settings and be used in several fluid injection applications. © 2017 Elsevier Ltd, V.V. acknowledges support from the ‘EPFL Fellows’ fellowship programme co-funded by Marie Curie, FP7 Grant agreement no. 291771. This work was funded in part by the “TRUST” project (European Community’s Seventh Framework Programme FP7/2007-2013 under grant agreement n 309607) and from “FracRisk” project (European Community’s Horizon 2020 Framework Programme H2020-EU.3.3.2.3 under grant agreement n 640979). Technical review comments of Dr. Paul Hsieh (USGS) are greatly appreciated., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The role of the stress regime on microseismicity induced by overpressure and cooling in geologic carbon storage

  • Vilarrasa, Víctor
Fluid injection in deep geological formations usually induces microseismicity. In particular, industrial-scale injection of CO2 may induce a large number of microseismic events. Since CO2 is likely to reach the storage formation at a lower temperature than that corresponding to the geothermal gradient, both overpressure and cooling decrease the effective stresses and may induce microseismicity. Here, we investigate the effect of the stress regime on the effective stress evolution and fracture stability when injecting cold CO2 through a horizontal well in a deep saline formation. Simulation results show that when only overpressure occurs, the vertical total stress remains practically constant, but the horizontal total stresses increase proportionally to overpressure. These hydro-mechanical stress changes result in a slight improvement in fracture stability in normal faulting stress regimes because the decrease in deviatoric stress offsets the decrease in effective stresses produced by overpressure. However, fracture stability significantly decreases in reverse faulting stress regimes because the size of the Mohr circle increases in addition to being displaced towards failure conditions. Fracture stability also decreases in strike slip stress regimes because the Mohr circle maintains its size and is shifted towards the yield surface a magnitude equal to overpressure minus the increase in the horizontal total stresses. Additionally, cooling induces a thermal stress reduction in all directions, but larger in the out-of-plane direction. This stress anisotropy causes, apart from a displacement of the Mohr circle towards the yield surface, an increase in the size of the Mohr circle. These two effects decrease fracture stability, resulting in the strike slip being the least stable stress regime when cooling occurs, followed by the reverse faulting and the normal faulting stress regimes. Thus, characterizing the stress state is crucial to determine the maximum sustainable injection pressure and maximum temperature drop to safely inject CO2. © 2016 John Wiley & Sons Ltd, V.V. acknowledges support from the ‘EPFL Fellows’ fellowship programme co-funded by Marie Curie, FP7 Grant agreement no. 291771., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Geomechanical analysis of the influence of CO2 injection location on fault stability

  • Vilarrasa, Víctor
  • Makhnenko, Roman Y.
  • Gheibi, Sohrab
Large amounts of carbon dioxide (CO2) should be injected in deep saline formations to mitigate climate change, implying geomechanical challenges that require further understanding. Pressure build-up induced by CO2 injection will decrease the effective stresses and may affect fault stability. Geomechanical effects of overpressure induced by CO2 injection either in the hanging wall or in the foot wall on fault stability are investigated. CO2 injection in the presence of a low-permeable fault induces pressurization of the storage formation between the injection well and the fault. The low permeability of the fault hinders fluid flow across it and leads to smaller overpressure on the other side of the fault. This variability in the fluid pressure distribution gives rise to differential total stress changes around the fault that reduce its stability. Despite a significant pressure build-up induced by the fault, caprock stability around the injection well is not compromised and thus, CO2 leakage across the caprock is unlikely to happen. The decrease in fault stability is similar regardless of the side of the fault where CO2 is injected. Simulation results show that fault core permeability has a significant effect on fault stability, becoming less affected for high-permeable faults. An appropriate pressure management will allow storing large quantities of CO2 without inducing fault reactivation. © 2016 Institute of Rock and Soil Mechanics, Chinese Academy of Sciences, The first author acknowledges the support from the “EPFL Fellows” fellowship program co-funded by Marie Curie, FP7 (Grant No. 291771) and partial support from the “TRUST” project of the European Community's Seventh Framework Programme FP7/2007–2013 (Grant No. 309607) and the “FracRisk” project of the European Community's Horizon 2020 Framework Programme H2020-EU.3.3.2.3 (Grant No. 640979). Activities of the second author are sponsored by SCCER-SoE (Switzerland) (Grant No. KTI.2013.288) and Swiss Federal Office of Energy (SFOE) project CAPROCK (Grant No. 810008154). This publication has also been produced with partial support from the BIGCCS Centre (for the third author), performed under the Norwegian research program Centers for Environment-friendly Energy Research (FME). The third author acknowledges the following partners for their contributions: Gassco, Shell, Statoil, TOTAL, ENGIE, and the Research Council of Norway (193816/S60)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Potential for Fault Reactivation Due to CO2 Injection in a Semi-Closed Saline Aquifer

  • Vilarrasa, Víctor
  • Makhnenko, Roman Y.
  • Laloui, Lyesse
CO2 injection in extensive saline aquifers that present no faults is unlikely to damage the caprock sealing capacity. In contrast, CO2 injection in closed reservoirs will induce a large pressure buildup that may reactivate the low-permeable faults that bound the reservoir. However, the vast majority of CO2 storage formations will be extensive saline aquifers bounded by a limited number of low-permeable faults. Such storage formations have received little attention and are the focus of this study. We model an extensive aquifer bounded by a heterogeneous low-permeable fault on one side and having open boundaries on the other sides. Simulation results show that the storage formation pressurizes between the injection well and the low-permeable fault, causing total stress changes and effective stress reduction around the fault. These changes lead to yielding of the fault core that is next to the lower half of the storage formation when injecting in the hanging wall. The yield of the fault core would induce a sequence of microseismic events with accumulated seismic moment equivalent to an earthquake of magnitude 1.7, which would not be felt on the ground surface and would not enhance permeability of the ductile clay-rich fault. © 2017 The Authors., V.V. acknowledges support from the ‘EPFL Fellows’ fellowship programme co-funded by Marie Curie, FP7 Grant agreement no. 291771. R.M. activities are sponsored by SCCER-SoE (Switzerland) grant KTI.2013.288 and Swiss Federal Office of Energy (SFOE) project CAPROCK #810008154., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Hydromechanical Aspects of CO2 Breakthrough into Clay-rich Caprock

  • Makhnenko, Roman Y.
  • Vilarrasa, Víctor
  • Mylnikov, Danila
  • Laloui, Lyesse
Caprock formations are intended to prevent upwards carbon dioxide (CO2) migration to the surface during CO2 geological storage. Caprock interaction with CO2, as well as its potential consequences, requires to be predicted, and thus, need to be studied experimentally. Laboratory investigations of caprock behavior are complex due to its low permeability, and the scarcity of experimental studies involving high-pressure CO2 injection into caprock representatives puts this difficulty into manifest. In this study, we perform laboratory experiments in an oedometric cell on intact and remolded Opalinus clay (Jurassic shale), evaluating the breakthrough pressure and permeability for liquid and supercritical CO2. Intact and remolded shale specimens present intrinsic permeabilities of 10-21 m2 to 10-20 m2, respectively. Applied axial stress ranges from 27 MPa to 42 MPa and the pressure and temperature conditions are representative of a caprock at a depth of 800 m. We found that the microstructure of the caprock has a great effect on the material properties. The intrinsic permeability of a more tight material (intact Opalinus clay) is around two times lower than that of remolded shale, which has a more open microstructure. Additionally, the intact rock becomes 30 times less permeable to CO2 than the remolded shale, which implies that the CO2 relative permeability is 15 times smaller for intact rock than for remolded shale. On the other hand, CO2 breakthrough pressure for the tighter material is almost three times lower than for the more permeable remolded shale. Breakthrough pressure of the remolded shale ranges from 3.9 MPa to 5.0 MPa for liquid CO2 and from 2.8 MPa to 4.6 MPa for supercritical CO2. For the intact shale, breakthrough pressure is 0.9 MPa for liquid CO2 and 1.6 MPa for supercritical CO2. Thus, the breakthrough pressure cannot be correlated with the intrinsic permeability of the caprock. © 2017 The Authors., Opalinus clay cores were provided by Swisstopo in the framework of Mont Terri Project, CS-C experiment. R. Makhnenko activities are sponsored by SCCER-SoE (Switzerland) grant KTI.2013.288 and Swiss Federal Office of Energy (SFOE) project CAPROCK #810008154. V. Vilarrasa acknowledges support from the ‘EPFL Fellows’ fellowship programme co-funded by Marie Curie, FP7 Grant agreement no. 291771., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Exploiting task constraints for self-calibrated brain-machine interface control using error-related potentials

  • Iturrate, I.
  • Grizou, J.
  • Omedes, J.
  • Oudeyer, P.Y
  • Lopes, M.
  • Montesano, L.
This paper presents a new approach for self-calibration BCI for reaching tasks using error- related potentials. The proposed method exploits task constraints to simultaneously cali- brate the decoder and control the device, by using a robust likelihood function and an ad- hoc planner to cope with the large uncertainty resulting from the unknown task and decoder. The method has been evaluated in closed-loop online experiments with 8 users using a pre- viously proposed BCI protocol for reaching tasks over a grid. The results show that it is pos- sible to have a usable BCI control from the beginning of the experiment without any prior calibration. Furthermore, comparisons with simulations and previous results obtained using standard calibration hint that both the quality of recorded signals and the performance of the system were comparable to those obtained with a standard calibration approach