Pasar al contenido principal

MATERIALES OPTICOS AVANZADOS PARA DISPOSITIVOS OPTOELECTRONICOS MAS EFICIENTES

MAT2014-54852-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2014
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 20
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Efficient bifacial dye-sensitized solar cells through disorder by design

  • Miranda-Muñoz, José M.
  • Carretero-Palacios, Sol
  • Jiménez-Solano, Alberto
  • Li, Yuelong
  • Lozano, Gabriel
  • Míguez, Hernán
Herein we realize an optical design that optimizes the performance of bifacial solar cells without modifying any of the usually employed components. In order to do so, dielectric scatterers of controlled size and shape have been successfully integrated in the working electrodes of dye-sensitized solar cells (DSSCs), resulting in bifacial devices of outstanding performance. Power conversion efficiencies (PCEs) as high as 6.7% and 5.4% have been attained under front and rear illumination, respectively, which represent a 25% and a 33% PCE enhancement with respect to an 8 mm-thick standard solar cell electrode using platinum as the catalytic material. The remarkable bifacial character of our approach is demonstrated by the high rear/front efficiency ratio attained, around 80%, which is among the largest reported for this sort of device. The proposed optimized design is based on a Monte Carlo approach in which the multiple scattering of light within the cell is fully accounted for. We identified that the spherical shape of the scatterers is the key parameter controlling the angular distribution of the scattering, the most efficient devices being those in which the inclusions provide a narrow forward-oriented angular distribution of the scattered light., Funding for the development of the research leading to these results was received from the European Research Council under the European Union's Seventh Framework Programme (FP7/2007-2013)/ERC grant agreement no. 307081 (POLIGHT) and the Spanish Ministry of Economy and Competitiveness under grant MAT2014-54852-R. JMMM acknowledges the Spanish Ministry of Education, Culture and Sport for the funding through an FPU program. AJS acknowledges the Spanish Ministry of Economy and Competitiveness for funding through an FPI program under the project MAT2011–23593. YL acknowledges the funding from the People Programme (Marie Curie Actions) of the European Union's Seventh Framework Programme FP7/2007-2013/under REA grant agreement no. 622533., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Solution processed high refractive index contrast distributed Bragg reflectors

  • Anaya, Miguel
  • Rubino, Andrea
  • Calvo, Mauricio E.
  • Míguez, Hernán
We have developed a method to alternate porous and dense dielectric films in order to build high refractive index contrast distributed Bragg reflectors (DBRs) capable of reflecting very efficiently in a targeted spectral range employing a small number of layers in the stack. Porous layers made of SiO2 nanoparticles and compact sol–gel processed TiO2 layers are sequentially deposited. The key to the preservation of porosity of every other layer during the deposition process is the use of a sacrificial layer of polystyrene that prevents the infiltration of the interstitial voids between nanoparticles with the homogeneous solution of TiO2 precursors. Our approach allows preparing a series of DBRs operating along the whole visible spectral range. Reflectance values as high as 90% are achieved from only seven layers. The particular distribution of porosity along one direction gives rise to an interesting interplay between the optical properties of the system and the vapor pressure in the surrounding atmosphere, which we foresee could be put into practice in gas sensing devices, The research leading to these results received funding from the European Research Council under the European Union's Seventh Framework Programme (FP7/2007–2013)/ERC grant agreement no. 307081 (POLIGHT) and the Spanish Ministry of Economy and Competitiveness under grant MAT2014 54852-R. MA is grateful to “La Caixa” Foundation for its financial support. FESEM characterization was performed at CITIUS, and we are grateful for its support., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis and Functionalization of Monodisperse Near-ultraviolet and Visible Excitable Multifunctional Eu3+, Bi3+:REVO4 Nanophosphors for Bioimaging and Biosensing Applications

  • Escudero, A.
  • Carrillo-Carrión, Carolina
  • Zyuzin, Mikhail V.
  • Ashraf, Sumaira
  • Hartmann,Raimo
  • Núñez, Nuria O.
  • Ocaña, Manuel
  • Parak, Wolfgang J.
Near-ultraviolet and visible excitable Eu- and Bi-doped NPs based on rare earth vanadates (REVO4, RE = Y, Gd) have been synthesized by a facile route from appropriate RE precursors, europium and bismuth nitrate, and sodium orthovanadate, by homogeneous precipitation in an ethylene glycol/water mixture at 120 °C. The NPs can be functionalized either by a one-pot synthesis with polyacrylic acid (PAA) or by a Layer-by-Layer approach with poly(allylamine hydrochloride) (PAH) and PAA. In the first case, the particle size can also be tuned by adjusting the amount of PAA. The Eu- Bi-doped REVO4 based nanophosphors show the typical red luminescence of Eu(III), which can be excited through an energy transfer process from the vanadate anions, resulting in a much higher luminescence intensity in comparison to the direct excitation of the europium cations. The incorporation of Bi into the REVO4 structure shifts the original absorption band of the vanadate anions towards longer wavelengths, giving rise to nanophosphors with an excitation maximum at 342 nm, which can also be excited in the visible range. The suitability of such nanophosphors for bioimaging and biosensing applications, as well as their colloidal stability in different buffer media of biological interest, their cytotoxicity, their degradability at low pH, and their uptake by HeLa cells have been evaluated. Their suitability for bioimaging and biosensing applications is also demonstrated., This work was supported by a Junta de Andalucía (Spain) Talentia Postdoc Fellowship, co-financed by the European Union's Seventh Framework Programme, grant agreement no 267226. Rocío Félix and Maximilian Schnabel are gratefully acknowledged for help with EDX and HAADF measurements, and sample preparation, respectively. CCC and SA acknowledge Alexander von Humboldt Foundation for a postdoctoral fellowship. Preliminary data corresponding to yttrium vanadate nanoparticles have been already shown in an extended abstract at the 2016 SPIE Photonic West conference.29 Parts of this work were supported by the European Commission (grant FutureNanoNeeds to WJP), and by the Spanish Ministerio de Economía y Competitividad (project MAT2014-54852-R to MO). We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Maximized performance of dye solar cells on plastic: a combined theoretical and experimental optimization approach

  • Li, Yuelong
  • Carretero-Palacios, Sol
  • Yoo, Kicheon
  • Hak Kim, Jong
  • Jiménez-Solano, Alberto
  • Lee, Chul-Ho
  • Míguez, Hernán
  • Ko, Min Jae
We demonstrate that a combined optimization approach based on the sequential alternation of theoretical analysis and experimental realization gives rise to plastic supported dye solar cells for which both light harvesting efficiency and electron collection are maximized. Rationalized configurations with optimized light trapping and charge extraction are realized to achieve photoanodes on plastic prepared at low temperature, showing a power conversion efficiency of 8.55% and a short circuit photocurrent of 16.11 mA cm 2, unprecedented for plastic based dye solar cell devices. Furthermore, the corresponding fully flexible designs present stable mechanical properties after several bending cycles, displaying 7.79% power conversion efficiency, an average broadband internal quantum efficiency above 90%, and a short circuit photocurrent of 15.94 mA cm 2, which is the largest reported value for bendable cells of this sort to date, Financial support from the European Research Council under the European Union's Seventh Framework Programme (FP7/2007–2013)/ERC grant agreement no. 307081 (POLIGHT) and the Spanish Ministry of Economy and Competitiveness under grant MAT2014-54852-R is gratefully acknowledged. YL acknowledges the financial support from the People Programme (Marie Curie Actions) of the European Union’s Seventh Framework Programme FP7/2007–2013/ under REA grant agreement no. 622533. AJS thanks Spanish Ministry of Economy and Competitiveness for funding through an FPI program under the project MAT2011–23593. MJK acknowledges funding support from the Global Frontier R&D Program on Center for Multiscale Energy System (2012M3A6A7054856), the Technology Development Program to Solve Climate Changes (2015M1A2A2056824) and 2015 University-Institute cooperation program funded by the National Research Foundation under the Ministry of Science, ICT & Future Planning, Korea. This work was also supported by the KIST institutional programs., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optical analysis of CH3NH3SnxPb1 xI3 absorbers: a roadmap for perovskite-on-perovskite tandem solar cells

  • Anaya, Miguel
  • Correa-Baena, Juan P.
  • Lozano, Gabriel
  • Saliba, Michael
  • Anguita, Pablo
  • Roose, Bart
  • Abate, Antonio
  • Steiner, Ullrich
  • Grätzel, Michael
  • Calvo, Mauricio E.
  • Hagfeldt, Anders
  • Míguez, Hernán
Organic–inorganic perovskite structures in which lead is substituted by tin are exceptional candidates for broadband light absorption. Herein we present a thorough analysis of the optical properties of CH3NH3SnxPb1−xI3 films, providing the field with definitive insights about the possibilities of these materials for perovskite solar cells of superior efficiency. We report a user's guide based on the first set of optical constants obtained for a series of tin/lead perovskite films, which was only possible to measure due to the preparation of optical quality thin layers. According to the Shockley–Queisser theory, CH3NH3SnxPb1−xI3 compounds promise a substantial enhancement of both short circuit photocurrent and power conversion efficiency in single junction solar cells. Moreover, we propose a novel tandem architecture design in which both top and bottom cells are made of perovskite absorbers. Our calculations indicate that such perovskite-on-perovskite tandem devices could reach efficiencies over 35%. Our analysis serves to establish the first roadmap for this type of cells based on actual optical characterization data. We foresee that this study will encourage the research on novel near-infrared perovskite materials for photovoltaic applications, which may have implications in the rapidly emerging field of tandem devices, The research leading to these results has received funding from the European Research Council under the European Union's Seventh Framework Programme (FP7/2007-2013)/ERC grant agreement no. 307081 (POLIGHT), the Spanish Ministry of Economy and Competitiveness under grant MAT2014-54852-R. MA is grateful to “La Caixa” Foundation for its financial support. AA has received funding from the European Union's Seventh Framework Programme for research, technological development and demonstration under grant agreement no 291771. MS is supported by the co-funded Marie Skłodowska Curie fellowship, H2020 grant agreement no. 665667. FESEM characterization was performed at CITIUS, and we are grateful for its support., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multifunctional Eu-doped NaGd(MoO4)2 nanoparticles functionalized with poly(L-lysine) for optical and MRI imaging

  • Laguna, Mariano
  • Núñez, Nuria O.
  • Rodríguez, Verónica
  • Cantelar, Eugenio
  • Stepien, Grazyna
  • García-Martín, María L.
  • Fuente, Jesús M. de la
  • Ocaña, Manuel
A method for the synthesis of non-aggregated and highly uniform Eu3+ doped NaGd(MoO4)2 nanoparticles is reported for the first time. The obtained particles present tetragonal structure, ellipsoidal shape and their size can be varied by adjusting the experimental synthesis parameters. These nanoparticles, which were coated with citrate anions and functionalised with PLL, have also been developed in order to improve their colloidal stability in physiological medium (2-(N-morpholino)ethanesulfonic acid, MES). A study of the luminescent dynamics of the samples as a function of the Eu doping level has been conducted in order to find the optimum nanophosphors, whose magnetic relaxivity and cell viability have also been evaluated for the first time for this system, in order to assess their suitability as multifunctional probes for optical (in vitro) and magnetic bioimaging applications, This work has been supported by the Spanish Ministry of Economy and Competitiveness (MINECO) (MAT2014-54852-R), CSIC (PIE 201460E005) and ERC-Starting Grant 239931-NANOPUZZLE, SAF2014-54763-C2-2-R, and Research Funding from DGA (Fondo Social Europeo)., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electron injection and scaffold effects in perovskite solar cells

  • Anaya, Miguel
  • Zhang, Wei
  • Clasen Hames, Bruno
  • Li, Yuelong
  • Fabregat-Santiago, Francisco
  • Calvo, Mauricio E.
  • Snaith, Henry J.
  • Míguez, Hernán
  • Mora-Seró, Iván
In spite of the impressive efficiencies reported for perovskite solar cells (PSCs), key aspects of their working principles, such as electron injection at the contacts or the suitability of the utilization of a specific scaffold layer, are not yet fully understood. Increasingly complex scaffolds attained by the sequential deposition of TiO2 and SiO2 mesoporous layers onto transparent conducting substrates are used to perform a systematic characterization of both the injection process at the electron selective contact and the scaffold effect in PSCs. By forcing multiple electron injection processes at a controlled sequence of perovskite–TiO2 interfaces before extraction, interfacial injection effects are magnified and hence characterized in detail. An anomalous injection behavior is observed, the fingerprint of which is the presence of significant inductive loops in the impedance spectra with a magnitude that correlates with the number of interfaces in the scaffold. Analysis of the resistive and capacitive behavior of the impedance spectra indicates that the scaffolds could hinder ion migration, with positive consequences such as lowering the recombination rate and implications for the current–potential curve hysteresis. Our results suggest that an appropriate balance between these advantageous effects and the unavoidable charge transport resistive losses introduced by the scaffolds will help in the optimization of PSC performance., The research leading to these results received funding from the European Research Council under the European Union's Seventh Framework Program (FP7/2007–2013)/ERC grant agreement no. 307081 (POLIGHT) and the Spanish Ministry of Economy and Competitiveness under grants MAT2014-54852-R and MAT2015-70611-ERC. MA is grateful to “La Caixa” Foundation and VPPI of the University of Seville for their financial support. Structural characterization was performed at CITIUS, and we are grateful for their support. B. C. H. is grateful for the support of the National Council of Technological and Scientific Development (CNPq), Brazil, through the Science without Borders program.307081, We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Plasmonic Nanoparticles as Light-Harvesting Enhancers in Perovskite Solar Cells: A User’s Guide

  • Carretero-Palacios, Sol
  • Jiménez-Solano, Alberto
  • Míguez, Hernán
In this Perspective we discuss the implications of employing metal particles of different shape, size, and composition as absorption enhancers in methylammonium lead iodide perovskite solar cells, with the aim of establishing some guidelines for the future development of plasmonic resonance-based photovoltaic devices. Hybrid perovskites present an extraordinarily high absorption coefficient which, as we show here, makes it difficult to extrapolate concepts and designs that are applied to other solution-processed photovoltaic materials. In addition, the variability of the optical constants attained from perovskite films of seemingly similar composition further complicates the analysis. We demonstrate that, by means of rigorous design, it is possible to provide a realistic prediction of the magnitude of the absorption enhancement that can be reached for perovskite films embedding metal particles. On the basis of this, we foresee that localized surface plasmon effects will provide a means to attain highly efficient perovskite solar cells using films that are thinner than those usually employed, hence facilitating collection of photocarriers and significantly reducing the amount of potentially toxic lead present in the device., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Design and Realization of a Novel Optically Disordered Material: A Demonstration of a Mie Glass

  • Miranda-Muñoz, José M.
  • Lozano, Gabriel
  • Míguez, Hernán
Herein, a diffusive material presenting optical disorder is introduced, which represents an example of a Mie glass. Comprising spherical crystalline TiO nanoparticles randomly dispersed in a mesoporous TiO matrix, it is proved that the scattering of light in this inhomogeneous solid can be predicted in an unprecedented manner from single-particle considerations employing Mie theory. To that aim, a study of the dependence of the key parameters employed is performed to describe light propagation in random media, i.e., the scattering mean free path and the transport mean free path, as a function of the size and concentration of the spherical inclusions based on a comparison between experimental results and analytical calculations. It is also demonstrated that Mie glasses enable enhanced fluorescence intensity due to a combined absorptance enhancement of the excitation light combined with an improved outcoupling of the emitted light. The method offers the possibility to perform a deterministic design for the realization of a light diffuser with tailor-made scattering properties., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

HoF3 and DyF3 nanoparticles as contrast agents for high-field magnetic resonance imaging

  • González-Mancebo, Daniel
  • Becerro, Ana Isabel
  • Rojas, T. Cristina
  • García-Martín, María L.
  • Fuente, Jesús M. de la
  • Ocaña, Manuel
Clinical contrast agents (CAs) currently used in magnetic resonance imaging (MRI) at low fields are less effective at high magnetic fields. The development of new CAs is mandatory to improve diagnostic capabilities of the new generation of high field MRI scanners. The purpose of this study is to synthesize uniform, water dispersible LnF3 (Ln = Ho, Dy) nanoparticles (NPs) and to evaluate their relaxivity at high magnetic field (9.4 T) as a function of size and composition. Two different types of HoF3 NPs are obtained by homogeneous precipitation in ethylene glycol at 120 °C. The use of holmium acetate as holmium precursor leads to rhombus-like nanoparticles, while smaller, ellipsoid-like nanoparticles are obtained when nitrate is used as the holmium salt. To explain this behavior, the mechanism of formation of both kinds of particles is analyzed in detail. Likewise, rhombus-like DyF3 nanoparticles are prepared following the same method as for the rhombus-like HoF3 nanoparticles. We have found, to the best of knowledge, the highest transverse relaxivity values at 9.4 T described in the literature for this kind of CAs. Finally, the LnF3 NPs have shown negligible cytotoxicity for C6 rat glioma cells for concentrations up to 0.1 mg mL¿1., This work was supported by the Spanish Ministry of Economy and competitiveness (MINECO) (MAT2014‐54852‐R and SAF2014‐54763‐C2‐2‐R), the CSIC (PIE 201560E056 and PIE 201460E005), the Fondo Social Europeo (FSE; Gobierno de Aragón) and the CIBER‐BBN., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Absorption enhancement in methylammonium lead iodide perovskite solar cells with embedded arrays of dielectric particles

  • Jiménez-Solano, Alberto
  • Carretero-Palacios, Sol
  • Míguez, Hernán
In the field of hybrid organic-inorganic perovskite based photovoltaics, there is a growing interest in the exploration of novel and smarter ways to improve the cells light harvesting efficiency at targeted wavelength ranges within the minimum volume possible, as well as in the development of colored and/or semitransparent devices that could pave the way both to their architectonic integration and to their use in the flowering field of tandem solar cells. The work herein presented targets these different goals by means of the theoretical optimization of the optical design of standard opaque and semitransparent perovskite solar cells. In order to do so, we focus on the effect of harmless, compatible and commercially available dielectric inclusions within the absorbing material, methylammonium lead iodide (MAPI). Following a gradual and systematic process of analysis, we are capable of identifying the appearance of collective and hybrid (both localized and extended) photonic resonances which allow to significantly improve light harvesting and thus the overall efficiency of the standard device by above 10% with respect to the reference value while keeping the semiconductor film thickness to a minimum. We believe our results will be particularly relevant in the promising field of perovskite solar cell based tandem photovoltaic devices, which has posed new challenges to the solar energy community in order to maximize the performance of semitransparent cells, but also for applications focusing on architectonic integration., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of the substrate on the bulk properties of hybrid lead halide perovskite films

  • Climent-Pascual, Esteban
  • Hames, Bruno Clasen
  • Moreno-Ramírez, Jorge S.
  • Álvarez, Ángel Luis
  • Juárez-Pérez, Emilio J.
  • Mas-Marzá, Elena
  • Mora-Seró, Iván
  • Andrés, Alicia de
  • Coya, Carmen
In addition to the known effect of the substrate on the interfacial properties of perovskite films, here we show that the bulk properties of hybrid lead halide perovskite films depend on the type of substrate used for film growth. Despite the relative large film thickness, ∼600 nm, the roughness and nature of the substrate layer (glass, FTO, TiO and PEDOT:PSS) affect not just the degree of preferential orientation and crystal grain size but also the lattice parameters of CHNHPbI films synthesized from the PbCl precursor. The obtained changes in lattice parameters indicate that the Pb-Pb distance varies by around 0.7%. We suggest that the substrate roughness and chemical nature determine the concentration of defects mainly by varying the chlorine content and probably by the incorporation of oxygen and iodine vacancies during film nucleation and growth. These differences also have consequences in the observed light induced transformations. Upon laser illumination, the formation of additional defects, most probably related to oxygen, is revealed by 110 and 165 cm Raman peaks. With increasing laser power the chemical transformation into PbO is clearly identified by the 140 and 275 cm Raman peaks. The irreversible photoluminescence enhancement observed at low power with illumination time, also dependent on the substrate nature, is proposed to be due to the localization of the electron-hole excitons created in the vicinity of the light generated defects. These results shed light on the performance of the perovskite layer and help to understand how bulk processes, where ion migration is a conspicuous example, are severely affected by interfacial properties such as those imposed by the substrate., Funding by the Spanish Ministerio de Economía y Competitividad (MINECO) under Projects MAT2015-65356-C3-1-R and 2-R, MAT2014-54852-R and MAT2015-70611-ERC and Comunidad de Madrid Excellence Network under Project S2013/MIT-2740 (and Associated Lab LABCADIO belonging to CM net labs ref. 351) is acknowledged. We also acknowledge the MINECO for financial support and provision of synchrotron radiation facilities at ESRF, and thank María Vila for her assistance in using beamline BM25-SpLine. B. C. H. is grateful to the support of the National Council of Technological and Scientific Development (CNPq), Brazil, through the Science without Borders program.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Transparent polycrystalline Sr: RE Ga3O7 melilite ceramics: Potential phosphors for tuneable solid state lighting

  • Boyer, Marina
  • Fernández-Carrión, Alberto J.
  • Ory, Sandra
  • Becerro, Ana Isabel
  • Villette, Sandrine
  • Eliseeva, Svetlana V.
  • Petoud, Stéphane
  • Aballea, Pierre
  • Matzen, Guy
  • Allix, Mathieu
Full and congruent crystallization from glass is applied to the SrREGaO melilite family (RE = Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb and Y). This innovative process enables the synthesis of polycrystalline ceramics exhibiting high transparency both in the visible and near infrared regions, despite tetragonal crystal structures and micrometer scale grain sizes. Moreover, glass crystallization provides an original route to synthesize new crystalline phases which are not accessible via a classic solid state reaction, as demonstrated for SrYbGaO and SrTmGaO. To illustrate the potential optical applications of such materials, SrGdGaO transparent polycrystalline ceramics are doped with Dy or Tb/Eu in order to generate white light emission under UV excitation. It is foreseen that such transparent melilite ceramic phosphors, prepared via a cost-effective process, can be successfully used in solid state lighting devices of considerable technological interest., The authors thank the French ANR for its financial support to the projects CrystOG ANR-12-JS08-0002 and FOCAL ANR-14-CE07-0002 and the ICMN (Orléans, France) and CME (Orléans, France) laboratories for the TEM and PIPS access. A. J. F.-C. gratefully acknowledges an F. P. D. I. grant from Junta de Andalucia. The work was also supported by MINECO (Project. MAT2014-54852-R). S. P. acknowledges support from INSERM.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Three-dimensional optical tomography and correlated elemental analysis of hybrid perovskite microstructures: an insight into defect-related lattice distortion and photoinduced Ion migration

  • Galisteo-López, Juan F.
  • Li, Yuelong
  • Míguez, Hernán
Organic lead halide perovskites have recently been proposed for applications in light-emitting devices of different sorts. More specifically, regular crystalline microstructures constitute an efficient light source and fulfill the geometrical requirements to act as resonators, giving rise to waveguiding and optical amplification. Herein we show three-dimensional laser scanning confocal tomography studies of different types of methylammonium lead bromide microstructures which have allowed us to dissect their photoemission properties with a precision of 0.036 μm. This analysis shows that their spectral emission presents strong spatial variations which can be attributed to defect-related lattice distortions. It is also largely enhanced under light exposure, which triggers the migration of halide ions away from illuminated regions, eventually leading to a strongly anisotropic degradation. Our work points to the need for performing an optical quality test of individual crystallites prior to their use in optoelectronics devices and provides a means to do so., Financial support of the European Research Council under the European Union’s Seventh Framework Programme (FP7/2007-2013)/ERC grant agreement no. 307081 (POLIGHT) and the Spanish Ministry of Economy and Competitiveness under Grant MAT2014-54852-R is gratefully acknowledged. Y.L. acknowledges the financial support from the People Programme (Marie Curie Actions) of the European Union’s Seventh Framework Programme FP7/2007-2013/under REA grant agreement no. 622533., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fluorescent humidity sensors based on photonic resonators

  • Szendrei, Katalin
  • Jiménez-Solano, Alberto
  • Lozano, Gabriel
  • Lotsch, Bettina V.
  • Míguez, Hernán
Among the different approaches to humidity sensing available, those based on fluorescent signals are gathering a great deal of attention due to their fast response and versatility of detection and design. So far, all proposals have focused on the use of luminescent probes whose emission is either triggered or inhibited by the presence of water that reacts or alters their chemical environment, hence inducing the signal change. Here, a novel concept in fluorescent humidity sensing based on combining stimuli-responsive photonic resonators with molecular fluorescent probes is introduced. The resonator is assembled from humidity-swellable antimony phosphate nanosheets embedding a planar light-emitting probe, whose emission is dramatically modified by the changes that ambient humidity causes in its photonic environment. Guided by “in silico” optical design of the resonator architecture and subsequent experimental realization, two embodiments of fluorescent photonic humidity sensors featuring turn-on and turn-off detection schemes are presented. The interplay between the luminescent properties of an emitter and its photonic environment implies a fundamental advantage as the emitters are not chemically altered during the detection process. At the same time, it paves the way toward a new generation of photonic humidity sensors which can conveniently be interfaced with common fluorescence detection schemes., Financial support granted by the Max Planck Society, the University of Munich (LMU), the Center for NanoScience (CeNS), the Deutsche Forschungsgemeinschaft (DFG) through the Cluster of Excellence Nanosystems Initiative Munich (NIM), the European Research Council under the European Union's Seventh Framework Programme (FP7/2007‐2013)/ERC Grant Agreement No. 307081 (POLIGHT), and the Spanish Ministry of Economy and Competitiveness under grant MAT2014‐54852‐R is gratefully acknowledged. A.J.‐S. acknowledges the Spanish Ministry of Economy and Competitiveness for funding through an FPI program under the project MAT2011‐23593.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Microemulsion-Mediated Synthesis and Properties of Uniform Ln:CaWO4 (Ln = Eu, Dy) Nanophosphors with Multicolor Luminescence for Optical and CT Imaging

  • Laguna, Mariano
  • Núñez, Nuria O.
  • García-García, Francisco J.
  • Corral, Ariadna
  • Parrado-Gallego, Ángel
  • Balcerzyk, Marcin
  • Becerro, Ana Isabel
  • Ocaña, Manuel
A new room‐temperature method has been developed that yields, for the first time in the literature, uniform and well‐dispersed CaWO4 nanospindles. This method is based on the use of microemulsions consisting of aqueous solutions of Ca2+ and WO42– precursors, cyclohexane as the organic medium, Triton X‐100 as the surfactant, and n‐octanol as the cosurfactant. We show that the formation of uniform nanospindles requires a restrictive set of experimental conditions. These particles crystallize into the tetragonal CaWO4 phase and emit blue–green luminescence when excited by UV radiation. The reported method is also useful for doping the CaWO4 spindles with Eu3+ or Dy3+ cations, resulting in multicolor emissions (red for Eu3+; white for Dy3+). The luminescence is much stronger when excited through a WO42––Ln3+ (Ln = Eu or Dy) energy‐transfer band than through the f–f transition bands of the Ln3+ cations. Interestingly, because of the white luminescence associated with the Dy:CaWO4 nanophosphor, it might be useful for LED technologies. Luminescence dynamics and energy‐transfer efficiency have been analyzed to determine the optimum phosphors. Finally, the Eu‐doped CaWO4 nanospindles also showed excellent X‐ray attenuation efficacy, which confers double functionality to this material as both a luminescence bioprobe and as a contrasting agent for X‐ray computed‐tomography., This work has been supported by the Spanish Ministry of Economy, Industry and Competitiveness (MAT2014‐54852‐R) and CSIC (PIE201460E005 and PIE 201560E056). We gratefully thank Mr. F. Varela (CITIUS – Universidad de Sevilla) and Dr. M. J. Sayagués for their help with the HRTEM and SAED measurements and interpretation., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Local Disorder and Tunable Luminescence in Sr1–x/2Al2–xSixO4 (0.2 ≤ x ≤ 0.5) Transparent Ceramics

  • Fernández-Carrión, Alberto J.
  • Al Saghir, Kholoud
  • Veron, Emmanuel
  • Becerro, Ana Isabel
  • Porcher, Florence
  • Wisniewski, Wolfgang
  • Matzen, Guy
  • Fayon, Franck
  • Allix, Mathieu
Eu-doped SrAlSiO (x = 0.2, 0.4, and 0.5) transparent ceramics have been synthesized by full and congruent crystallization from glasses prepared by aerodynamic levitation and laser-heating method. Structural refinements from synchrotron and neutron powder diffraction data show that the ceramics adopt a 1 × 1 × 2 superstructure compared to the SrAlO hexagonal polymorph. While the observed superstructure reflections indicate a long-range ordering of the Sr vacancies in the structure, Si and Al solid-state NMR measurements associated with DFT computations reveal a significant degree of disorder in the fully polymerized tetrahedral network. This is evidenced through the presence of Si-O-Si bonds, as well as Si(OAl) units at remote distances of the Sr vacancies and Al(OAl) units in the close vicinity of Sr vacancies departing from local charge compensation in the network. The transparent ceramics can be doped by europium to induce light emission arising from the volume under UV excitation. Luminescence measurements then reveal the coexistence of Eu and Eu in the samples, thereby allowing tuning the emission color depending on the excitation wavelength and suggesting possible applications such as solid state lighting., The authors also thank the French ANR for its financial support to the FOCAL ANR-14-CE07-0002 and Equipex Planex ANR-11-EQPX-36 projects, the CNRS and CSIC for the PICS n° 07490 and PIC2016FR1 projects, as well as the Spanish Ministry of Economy and Competitiveness for the grant MAT2014 54852-R. A. J. F.-C. gratefully acknowledges an F. P. D. I. grant from Junta de Andalucía. Financial support from the TGIR RMN THC FR3050 for conducting the research is gratefully acknowledged. Use of the Advanced Photon Source at Argonne National Laboratory was supported by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences, under Contract No. DE-AC02-06CH11357.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Rare earth based nanostructured materials: Synthesis, functionalization, properties and bioimaging and biosensing applications

  • Escudero, A.
  • Becerro, Ana Isabel
  • Carrillo-Carrión, Carolina
  • Núñez, Nuria O.
  • Zyuzin, Mikhail V.
  • Laguna, Mariano
  • González-Mancebo, Daniel
  • Ocaña, Manuel
  • Parak, Wolfgang J.
Rare earth based nanostructures constitute a type of functional materials widely used and studied in the recent literature. The purpose of this review is to provide a general and comprehensive overview of the current state of the art, with special focus on the commonly employed synthesis methods and functionalization strategies of rare earth based nanoparticles and on their different bioimaging and biosensing applications. The luminescent (including downconversion, upconversion and permanent luminescence) and magnetic properties of rare earth based nanoparticles, as well as their ability to absorb X-rays, will also be explained and connected with their luminescent, magnetic resonance and X-ray computed tomography bioimaging applications, respectively. This review is not only restricted to nanoparticles, and recent advances reported for in other nanostructures containing rare earths, such as metal organic frameworks and lanthanide complexes conjugated with biological structures, will also be commented on., This work was supported by a Junta de Andalucía (Spain) Talentia Postdoc Fellowship, co-financed by the European Union’s Seventh Framework Programme, grant agreement no 267226, by the Spanish Ministerio de Economía y Competitividad (project MAT2014-54852-R to MO) and by the European Commission (grant FutureNanoNeeds to W.J.P.). C.C.C. acknowledges the Spanish Ministerio de Economía y Competitividad for a Juan de la Cierva – Incorporación contract.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Flexible and adaptable light-emitting coatings for arbitrary metal surfaces based on optical tamm mode coupling

  • Jiménez-Solano, Alberto
  • Galisteo-López, Juan F.
  • Míguez, Hernán
This study demonstrates a design that maximizes the power radiated into free space from a monolayer of nanoemitters embedded in a flexible distributed Bragg reflector conformably attached to a metal surface. This is achieved by positioning the light source at the precise depth within the multilayer for which optical Tamm states provide enhanced quantum yield and outcoupling efficiency, which are combined to optimize the luminous power radiated by the surface of the ensemble. This approach, based on the adhesion of flexible multilayer stacks onto metal surfaces with an arbitrary curvature, is versatile and permits the realization of spectrally narrow monodirectional or self-focusing light-emitting surfaces., Financial support of the European Research Council under the European Union's Seventh Framework Programme (FP7/2007−2013)/ERC grant agreement no. 307081 (POLIGHT) and the Spanish Ministry of Economy and Competitiveness under grant MAT2014‐54852‐R was gratefully acknowledged. A.J.S. acknowledges the Spanish Ministry of Economy and Competitiveness for funding through an FPI program under the project MAT2011‐23593., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Multifunctional Eu-doped NaGd(MoO4)(2) nanoparticles functionalized with poly(L-lysine) for optical and MRI imaging

  • Laguna, M.
  • Nunez, N.O.
  • Rodriguez, V.
  • Cantelar, E.
  • Stepien, G.
  • Garcia, M.L.
  • de la Fuente, J.M.
  • Ocana, M.
A method for the synthesis of non-aggregated and highly uniform Eu3+ doped NaGd(MoO4)(2) nanoparticles is reported for the first time. The obtained particles present tetragonal structure, ellipsoidal shape and their size can be varied by adjusting the experimental synthesis parameters. These nanoparticles, which were coated with citrate anions and functionalised with PLL, have also been developed in order to improve their colloidal stability in physiological medium (2-(N-morpholino) ethanesulfonic acid, MES). A study of the luminescent dynamics of the samples as a function of the Eu doping level has been conducted in order to find the optimum nanophosphors, whose magnetic relaxivity and cell viability have also been evaluated for the first time for this system, in order to assess their suitability as multifunctional probes for optical (in vitro) and magnetic bioimaging applications.