Pasar al contenido principal

MATERIALES HIBRIDOS BASADOS EN GRAFENO PARA APLICACIONES EN ENERGIA Y DETECCION OPTICA

MAT2015-65356-C3-1-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2015
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Dirección General de Investigación Científica y Técnica
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 19
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Predicting the suitability of aqueous solutions of deep eutectic solvents for preparation of co-continuous porous carbons via spinodal decomposition processes

  • Posada, Elena
  • López-Salas, Nieves
  • Carriazo, Daniel
  • Muñoz-Márquez, Miguel Ángel
  • Ovín Ania, María Concepción
  • Jiménez Riobóo, R. J.
  • Gutiérrez, María C.
  • Ferrer, M. Luisa
  • Monte, Francisco del
Spinodal decomposition (SD) processes have proved effective for the synthesis of macro- and mesoporous materials. Despite the theoretical aspects of SD processes are well understood, finding the proper experimental conditions – both the components as well as the ratio in which they have to be combined – to attain co-continuous structures is a non-predictable and quite tedious process, typically based on trial and error. The challenge is finding a “tool” capable to predict the suitability of a particular starting solution to undergo SD processes. Here in, we used aqueous solutions of deep eutectic solvents (DESs) for the preparation via SD of co-continuous porous carbons, the morphologies of which ranged from spinodal to aggregates-of-particles-like just depending on dilution. Despite the starting DES/HO binary mixture was macroscopically homogeneous, Brillouin spectroscopy revealed the occurrence of certain nanostructural rearrangements within a dilution range that coincided with that used for preparation of carbons with morphologies transitioning from spinodal to aggregates-of-particles-like. Moreover, carbons exhibited a noticeable degree of heteroatom co-doping – e.g. N and P – and proved particularly effective for CO capture with adsorptions of up to 4.7 mmol/g at 0 °C and 760 mbar., This work was supported by MINECO/FEDER (Project Numbers MAT2015-68639-R and MAT2015-65356-C3-1-R) and Comunidad de Madrid Excellence Network (Project Number S2013/MIT-2740). N. López-Salas also acknowledges MINECO for a FPI research contract.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis and properties of Nd-doped oxynitride phosphate laser glasses

  • Muñoz, Francisco
  • Saitoh, Akira
  • Jiménez Riobóo, R. J.
  • Balda, Rolindes
The substitution of nitrogen for oxygen in phosphate glasses improves the chemical, thermal and mechanical properties and particularly reduces their very high hygroscopic character, although the preparation of homogeneous and free of defects oxynitride bulk phosphate glasses through ammonolysis represents a big challenge. This work reports on the synthesis and properties of a series of Nd-doped oxynitride phosphate glasses with composition Na0.3K0.3Ba0.2PO3-3x/2Nx that may find application as laser hosts. Whereas the glass transition temperature, elastic modulus and index of refraction show a regular increase with the nitrogen content that agrees with previous studies, the effect of nitrogen onto the luminescence of Nd3+ ions appears to be more complicated. The average lifetime of the decay from the 4F3/2 level decreases with the N/P ratio of the glasses, which is thought to be mainly due to the presence of water from the ammonolysis reaction. However, further thermal treatments under N2 flow of an oxynitride glass have shown an important reduction of the water content as well as a drastic increase of the luminescence lifetime of Nd3+, this being a promising method for the development of laser phosphate glasses having good chemical and mechanical properties., The authors thank funding from projects MAT2013-48246-C2-1-P, MAT2013-48246-C2-2-P and MAT2015-65356-C3-1-R from MINECO of Spain, Basque Country University for PPG17/07 and I-link + 0959 from CSIC., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Interference enhanced Raman effect in graphene bubbles

  • Ramírez-Jiménez, Rafael
  • Álvarez-Fraga, Leo
  • Jiménez-Villacorta, Félix
  • Climent-Pascual, Esteban
  • Prieto, Carlos
  • Andrés, Alicia de
Stable Graphene/gas/Cu bubbles are formed by the spontaneous oxidation at room conditions of the Cu substrates used as the catalyst agent in chemical vapor deposition growth of graphene. The non homogeneous copper oxidation produces discontinuous CuO films where atmospheric molecules get trapped by the impermeable graphene layer forming bubbles. Raman Interference effects are calculated both for graphene and CuO phonons in graphene/CuO/Cu system using the transfer matrix method finding that CuO thickness is limited to 20 nm and maximum Raman enhancement of graphene is 10. Nevertheless, enhancement values up to 60 are detected for micrometric graphene bubbles on copper which, according to the simulations, are 70 nm height. AFM measurements confirm the bubble dimensions and show that they are mechanically softer than graphene on copper. Consistently, the Raman characteristics of the graphene bubbles coincide with free standing undoped graphene with small strain, in the range 0-0.3%, while graphene on CuO presents hole doping and larger strain fields. The simulations indicate that interference Raman enhancement can reach values >10 in graphene/dielectric/Aluminum trilayers (dielectric = gas, oxide or polymer). These systems are therefore interesting platforms for optical sensing where graphene is the adequate bio-compatible layer for metallic nanoparticles and molecules deposition., A-F. acknowledges a FPI grant from Spanish Ministerio de Economía y Competitividad (MINECO) (BES-2013-062759) and E.C-P from the European Union Seventh Framework Program under grant agreement n° 604391 “Graphene Flagship”. The research leading to these results has received funding from Spanish MINECO (MAT2012-37276-C03-01 and MAT2015-65356-C3-1-R) and Comunidad Autónoma de Madrid (S2013/MIT-2740, PHAMA2.0-CM).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of the substrate on the bulk properties of hybrid lead halide perovskite films

  • Climent-Pascual, Esteban
  • Hames, Bruno Clasen
  • Moreno-Ramírez, Jorge S.
  • Álvarez, Ángel Luis
  • Juárez-Pérez, Emilio J.
  • Mas-Marzá, Elena
  • Mora-Seró, Iván
  • Andrés, Alicia de
  • Coya, Carmen
In addition to the known effect of the substrate on the interfacial properties of perovskite films, here we show that the bulk properties of hybrid lead halide perovskite films depend on the type of substrate used for film growth. Despite the relative large film thickness, ∼600 nm, the roughness and nature of the substrate layer (glass, FTO, TiO and PEDOT:PSS) affect not just the degree of preferential orientation and crystal grain size but also the lattice parameters of CHNHPbI films synthesized from the PbCl precursor. The obtained changes in lattice parameters indicate that the Pb-Pb distance varies by around 0.7%. We suggest that the substrate roughness and chemical nature determine the concentration of defects mainly by varying the chlorine content and probably by the incorporation of oxygen and iodine vacancies during film nucleation and growth. These differences also have consequences in the observed light induced transformations. Upon laser illumination, the formation of additional defects, most probably related to oxygen, is revealed by 110 and 165 cm Raman peaks. With increasing laser power the chemical transformation into PbO is clearly identified by the 140 and 275 cm Raman peaks. The irreversible photoluminescence enhancement observed at low power with illumination time, also dependent on the substrate nature, is proposed to be due to the localization of the electron-hole excitons created in the vicinity of the light generated defects. These results shed light on the performance of the perovskite layer and help to understand how bulk processes, where ion migration is a conspicuous example, are severely affected by interfacial properties such as those imposed by the substrate., Funding by the Spanish Ministerio de Economía y Competitividad (MINECO) under Projects MAT2015-65356-C3-1-R and 2-R, MAT2014-54852-R and MAT2015-70611-ERC and Comunidad de Madrid Excellence Network under Project S2013/MIT-2740 (and Associated Lab LABCADIO belonging to CM net labs ref. 351) is acknowledged. We also acknowledge the MINECO for financial support and provision of synchrotron radiation facilities at ESRF, and thank María Vila for her assistance in using beamline BM25-SpLine. B. C. H. is grateful to the support of the National Council of Technological and Scientific Development (CNPq), Brazil, through the Science without Borders program.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Efficient heterostructures for combined interference and plasmon resonance raman amplification

  • Álvarez-Fraga, Leo
  • Climent-Pascual, Esteban
  • Aguilar-Pujol, Montserrat
  • Ramírez-Jiménez, Rafael
  • Jiménez-Villacorta, Félix
  • Prieto, Carlos
  • Andrés, Alicia de
The detection, identification, and quantification of different types of molecules and the optical imaging of, for example, cellular processes are important challenges. Here, we present how interference-enhanced Raman scattering (IERS) in adequately designed heterostructures can provide amplification factors relevant for both detection and imaging. Calculations demonstrate that the key factor is maximizing the absolute value of the refractive indices' difference between dielectric and metal layers. Accordingly, Si/Al/AlO/graphene heterostructures have been fabricated by optimizing the thickness and roughness and reaching enhancement values up to 700 for 488 nm excitation. The deviation from the calculated enhancement, 1200, is mainly due to reflectivity losses and roughness of the Al layer. The IERS platforms are also demonstrated to improve significantly the quality of white light images of graphene and are foreseen to be adequate to reveal the morphology of 2D and biological materials. A graphene top layer is adequate for most organic molecule deposition and often quenches possible fluorescence, permitting Raman signal detection, which, for a rhodamine 6G (R6G) monolayer, presents a gain of 400. Without graphene, the nonquenched R6G fluorescence is similarly amplified. The wavelength dependence of the involved refractive indices predicts much higher amplification (around 10) for NIR excitation. These interference platforms can therefore be used to gain contrast and intensity in white light, Raman, and fluorescence imaging. We also demonstrate that surface-enhanced Raman scattering and IERS amplifications can be efficiently combined, leading to a gain of >10 (at 488 nm) by depositing a Ag nanostructured transparent film on the IERS platform. When the plasmonic structures deposited on the IERS platforms are optimized, singlemolecule detection can be actively envisaged., L.A.-F. acknowledges a FPI grant (BES-2013-062759) from Spanish Ministerio de Economía y Competitividad (MINECO). The research leading to these results has received funding from MINECO (MAT2012-37276-C03-01 and MAT2015-65356-C3-1-R) and Comunidad de Madrid (S2013/MIT-2740, PHAMA2.0-CM).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ultrasmooth metal thin films on curved fused silica by laser polishing

  • Anemone, Gloria
  • Weingarten, Christian
  • Taleb, Amjad Al.
  • Prieto, Carlos
  • Farías, Daniel
The fabrication of atomically smooth metal films on supporting oxides is a quite demanding task, since most physical vapor deposition methods used on metals do not work properly on oxide substrates. Here, we report an alternative procedure, based on performing laser polishing of a fused silica substrate before depositing the metallic thin film. This reduces the RMS surface roughness of fused silica by ca. 33%, and increases the maximum grain size of the metallic film from 200 nm to 1200 nm. The method has been applied to a fused silica parabolic lens, which has been coated with a graphene-terminated Ru thin film. The reduction of surface roughness caused by laser polishing leads to the formation of ultrasmooth Ru thin films. Crystallinity and subnanometer roughness of the metal coating are demonstrated by the observation of He diffraction from a macroscopically curved surface., This work has been supported by the European Union, FP7, Grant no. 309672 and by the Spanish MINECO under projects MAT2015-65356-C3-3-R and MAT2015-65356-C3-1-R. D.F. acknowledges financial support from the Spanish MINECO, through the “María de Maeztu” Programme for Units of Excellence in R&D (MDM-2014-0377).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Raman characterization and photoluminescence properties of La1-xTbxPO4·nH2O and La1-xTbxPO4 phosphor nanorods prepared by microwave-assisted hydrothermal synthesis

  • Colomer, María T.
  • Bartolomé, Jose F.
  • Ortiz, A.L.
  • Andrés, Alicia de
The effect of the Tb–doping content (in the range 0–100 mol%) on the structure (using Raman spectroscopy) and photoluminescence (PL) properties of both rhabdophane-type LaTbPO·nHO and monazite-type LaTbPO single-crystal nanorods was investigated. LaTbPO·nHO was directly obtained by microwave-assisted hydrothermal synthesis and LaTbPO by calcination of LaTbPO·nHO at 700 °C in air for 2 h. It was found that the characteristic Raman bands shift to higher wavenumbers and become broader with increasing Tb concentration, which is attributed to attendant unit-cell volume reduction. The PL due to the Tb f-f transitions has been studied with continuous and pulsed excitations. The PL intensity increases with doping and is maximum for LaTbPO·nHO and LaTbPO, i.e., for rhabdophane and monazite-type structures, respectively. A quenching effect is detected for concentrations below x=0.05, but constant efficiency is obtained at higher doping. The calcination increases the efficiency by a factor around 2 due to the combined effects of water molecules and defect elimination. The PL decay curves reveal a long lifetime attributable to single Tb ions which is almost independent of doping for monazite nanorods (5–4.5 ms), and a shorter one around 0.2 ms most likely due to Tb dimmers., This work was supported by the Ministerio de Economía y Competitividad (MINECO, Government of Spain) under Grants no. MAT2012-31090, MAT2015-65356-C3-1-R, MAT2016-78700-R and MINECO and FEDER Funds under Grant no. MAT2016-76638-R. Financial support from the Comunidad de Madrid under Grant no. P2013/MIT-2740 is also acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Oxidation mechanisms of copper under graphene: the role of oxygen encapsulation

  • Álvarez-Fraga, Leo
  • Rubio-Zuazo, J.
  • Jiménez-Villacorta, Félix
  • Climent-Pascual, Esteban
  • Ramírez, Rafael
  • Prieto, Carlos
  • Andrés, Alicia de
The oxidation and corrosion of copper are fundamental issues studied for many decades due to their ubiquitous and transversal impact. However, the oxidation of copper used as catalyst for graphene synthesis has opened a singular problem not yet solved. Contradictory results are reported about the protecting or enhancing role of graphene in copper oxidation. We study short- and long-term oxidation of copper with different characteristics, such as oxygen content and morphology, with and without graphene, and in polycrystalline copper foils and almost totally textured (100) and (111) copper films on MgO and sapphire substrates, respectively. We propose a mechanism to explain the enhanced oxidation of polycrystalline copper originated by oxygen encapsulated by the graphene impermeable layer during graphene growth. The initial oxygen content and the existence of grain boundaries are the main factors that determine the relevance of this process. Graphene is shown to prevent oxidation from the atmosphere for any of the copper substrates but also promotes slow oxidation derived by the release of out-of-equilibrium encapsulated oxygen. The formation of bubbles after several months evidence this slow release. The occluded oxygen in graphene covered copper is demonstrated by comparing the oxygen to copper ratio at different depths using hard X-ray photoelectron spectroscopy for samples with and without graphene., Funding by the Spanish Ministerio de Economía y Competitividad (MINECO) under Projects MAT2015-65356-C3-1-R and MAT2012-37276-C03-01 and Comunidad de Madrid Excellence Network under Project S2013/MIT-2740 is acknowledged. We also acknowledge the MINECO for financial support and provision of synchrotron radiation facilities at BM25 SpLine The Spanish CRG Beamline at the ESRF. L.A-F. acknowledges a FPI grant (BES-2013-062759) from MINECO.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanocrystalline cubic ruthenium carbide formation in the synthesis of graphene on ruthenium ultrathin films

  • Jiménez-Villacorta, Félix
  • Álvarez-Fraga, Leo
  • Bartolomé, Javier
  • Climent-Pascual, Esteban
  • Salas, Eduardo
  • Aguilar-Pujol, Montserrat
  • Ramírez, Rafael
  • Cremades, Ana
  • Prieto, Carlos
  • Andrés, Alicia de
Graphene is grown by chemical vapour deposition on ruthenium ultrathin films down to a nominal thickness of 5 nm. While at 910 °C multilayer graphitic films are obtained, single layer defective graphene is formed at 1000 °C. The extremely thin Ru films allow the formation of a novel nano-crystalline ruthenium carbide phase to be discerned by combining synchrotron X-ray diffraction, synchrotron X-ray absorption spectroscopy and electron diffraction. The ruthenium carbide (Ru-C) phase formed at or above 1000 °C presents cubic symmetry (cP) with a lattice parameter of 2.927 Å and a Ru-C distance of around 2.31 Å. The increase of C solubility in ruthenium seems to be sufficient to trigger the stabilization of the Ru-C phase during graphene growth preferentially in grains with orientation different to (0001). The structural transition from hcp Ru to cP Ru-C is not limited to a shell; it occurs for the whole grain. The formation of the carbide seems to favour the synthesis of single layer graphene by hindering the segregation of carbon to the surface during cooling. This simple method allows nano-crystalline ruthenium-carbide films to be obtained as well as graphene covered Ru nanograins, both with size control. These new materials are foreseen to present interesting mechanical, catalytic and sensing properties.http://doi.org/10.1039/C7TC02855E, Funding by the Spanish Ministerio de Economía y Competitividad (MINECO) under Project MAT2015-65356-C3-1-R and Comunidad de Madrid Excellence Network under Project S2013/MIT-2740 is acknowledged. We also acknowledge the MINECO for financial support and provision of synchrotron radiation facilities at the BM25 SpLine of The Spanish CRG Beamline at the ESRF. L. A.-F. acknowledges a FPI grant (BES-2013-062759) from MINECO.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reline aqueous solutions behaving as liquid mixtures of H-bonded co-solvents: microphase segregation and formation of co-continuous structures as indicated by Brillouin and 1H NMR spectroscopies

  • Posada, Elena
  • López-Salas, Nieves
  • Jiménez Riobóo, R. J.
  • Ferrer, M. Luisa
  • Gutiérrez, María C.
  • Monte, Francisco del
Deep eutectic solvents (DESs) offer a suitable alternative to conventional solvents in terms of both performance and cost-effectiveness. Some DESs also offer certain green features, the greenness of which is notoriously enhanced when combined with water. Aqueous DES dilutions are therefore attracting great attention as a novel green medium for biotechnological processes, with the aqueous dilutions of reline-a DES composed of urea and choline chloride-being one of the most studied systems. Despite their macroscopic homogeneous appearance, both H NMR spectroscopic studies and molecular dynamics simulations have revealed the occurrence of certain dynamic heterogeneity at a microscopic molecular level. Ultrasonic measurements were also used with the aim of getting further insights but nonconclusive results were obtained. Herein, we have studied aqueous reline dilutions by Brillouin spectroscopy given its proved suitability for detecting local structure rearrangements in liquid mixtures of H-bonded co-solvents. Brillouin spectroscopy revealed the formation of a co-continuous structure resulting from local structure rearrangements and micro-segregation into aqueous and DES phases. Interestingly, there is agreement between H NMR and Brillouin spectroscopy when pointing to the DES content where microphase segregation and formation of co-continuous structures occurred., This work was supported by MINECO (Project Numbers MAT2015-68639-R and MAT2015-65356-C3-1-R) and Comunidad de Madrid Excellence Network (Project Number S2013/MIT-2740). N. López-Salas also acknowledges MINECO/FEDER for a FPI research contract.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Evidencing early pyrochlore formation in rare-earth doped TiO2 nanocrystals: Structure sensing via VIS and NIR Er3+ light emission

  • Camps, I.
  • Borlaf, Mario
  • Toudert, Johann
  • Andrés, Alicia de
  • Colomer, María T.
  • Moreno, Rodrigo
  • Serna, Rosalía
8 pags., 6 figs., Er doping of TiO colloidal nanocrystals enhances their performance for photo-induced applications. Such doping is known to delay the anatase to rutile transformation under thermal treatment; nonetheless relevant information on the Er light emission and location within the TiO structures is still incomplete. Er photoluminescence emission both in the visible (upconverted) and infrared photoluminescence is used for the first time to probe the ions location within the different TiO structures. The results show that Er ions in the as-prepared xerogels are not embedded in the anatase crystallites, and only upon thermal treatment Er diffusion is induced into crystal interstitial positions to form a solid solution. At higher temperatures rutile is formed inducing Er segregation and giving rise to the formation of pyrochlore (ErTiO), as shown by a distinct emission in the infrared spectrum due to the Er ions located within the pyrochlore compound. Although pyrochlore is usually a high temperature phase, analysis of the photoluminescence allows its labeling at temperatures as low as 600–700 °C for small Er concentrations (1 mol %). Increasing Er concentration promotes its enrichment at the nanocrystallites surface accomplished by the anatase-to-rutile phase transformation, suggesting that Er ions control the TiO nanocrystals surface properties., This work was supported by the Ministerio de Economía y Competitividad (MINECO, Government of Spain) under Grants MINECO/FEDER TEC2015-69916-C2-1-R and MAT2015-65356-C3-1-R. IC and MB acknowledge the grants JAE-Pre-201100578 and JAE-Pre-083, respectively., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Photoluminescence enhancement of monolayer MoS2 using plasmonic gallium nanoparticles

  • Catalán-Gómez, Sergio
  • Garg, Sourav
  • Redondo-Cubero, Andrés
  • Gordillo, Nuria
  • Andrés, Alicia de
  • Nucciarelli, Flavio
  • Kim, Seonsing
  • Kung, Patrick
  • Pau, José Luis
[EN] 2D monolayer molybdenum disulphide (MoS) has been the focus of intense research due to its direct bandgap compared with the indirect bandgap of its bulk counterpart; however its photoluminescence (PL) intensity is limited due to its low absorption efficiency. Herein, we use gallium hemispherical nanoparticles (Ga NPs) deposited by thermal evaporation on top of chemical vapour deposited MoS monolayers in order to enhance its luminescence. The influence of the NP radius and the laser wavelength is reported in PL and Raman experiments. In addition, the physics behind the PL enhancement factor is investigated. The results indicate that the prominent enhancement is caused by the localized surface plasmon resonance of the Ga NPs induced by a charge transfer phenomenon. This work sheds light on the use of alternative metals, besides silver and gold, for the improvement of MoS luminescence., The research is supported by the MINECO (CTQ2014-53334-C2-2-R, MAT2015-65356-C3-1-R and CTQ2017-84309-C2-2-R) and Comunidad de Madrid (NANOAVANSENS ref. S2013/MIT-3029) and UAM-Santander (2017/EEUU/14) projects. ARC acknowledges the Ramón y Cajal program (under contract number RYC-2015-18047). FN acknowledges support from the Marie Sklodowska-Curie grant agreement No. 641899 from the European Union's Horizon 2020 research and innovation programme.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Impact of optical tissue clearing on the brillouin signal from biological tissue samples

  • Jiménez Riobóo, R. J.
  • Desco, Manuel
  • Gomez-Gaviro, María Victoria
[EN] Brillouin spectroscopy is a well-established technology in condensed matter physics to characterize the mechanical properties of inert materials, and it has been extended very recently to the study of biological samples. Transparency is beneficial for samples to be properly analyzed by Brillouin spectroscopy. Here, we explored the efficacy of optical tissue clearing techniques to improve the acquisition of Brillouin spectra from biological tissues in order to analyze their biomechanical properties. We describe the first application of Brillouin scattering to optically cleared biological tissues with CUBIC protocol. We conclude that, within the range of error, tissue clearing does not modify the mechanical properties of the studied biological tissues., Ministerio de Ciencia, Innovación y Universidades, the Pro CNIC Foundation, Severo Ochoa Center of Excellence (SEV-2015-0505); ISCIII-FIS grants PI18/00462 co-financed by ERDF, European Union (FEDER) Funds from the European Commission, European Union, “A way of making Europe”; MINECO/FEDER (MAT2015-65356-C3-1-R); Comunidad de Madrid
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Supported Ultra-Thin Alumina Membranes with Graphene as Efficient Interference Enhanced Raman Scattering Platforms for Sensing

  • Aguilar-Pujol, Montserrat
  • Ramírez-Jiménez, Rafael
  • Xifré-Pérez, Elisabet
  • Cortijo-Campos, Sandra
  • Bartolomé, Javier
  • Marsal, L. F.
  • Andrés, Alicia de
© 2020 by the authors., The detection of Raman signals from diluted molecules or biomaterials in complex media is still a challenge. Besides the widely studied Raman enhancement by nanoparticle plasmons, interference mechanisms provide an interesting option. A novel approach for amplification platforms based on supported thin alumina membranes was designed and fabricated to optimize the interference processes. The dielectric layer is the extremely thin alumina membrane itself and, its metallic aluminum support, the reflecting medium. A CVD (chemical vapor deposition) single-layer graphene is transferred on the membrane to serve as substrate to deposit the analyte. Experimental results and simulations of the interference processes were employed to determine the relevant parameters of the structure to optimize the Raman enhancement factor (E.F.). Highly homogeneous E.F. over the platform surface are obtained, typically 370 ± (5%), for membranes with ~100 nm pore depth, ~18 nm pore diameter and the complete elimination of the Al2O3 bottom barrier layer. The combined surface enhanced Raman scattering (SERS) and interference amplification is also demonstrated by depositing ultra-small silver nanoparticles. This new approach to amplify the Raman signal of analytes is easily obtained, low-cost and robust with useful enhancement factors (~400) and allows only interference or combined enhancement mechanisms, depending on the analyte requirements., The research leading to these results has received funding from Ministerio de Ciencia, Innovación y Universidades (RTI2018-096918-B-C41) and RTI2018-094040-B-I00) and by the Agency for Management of University and Research Grants (AGAUR) 2017-SGR-1527. S.C. acknowledges the grant BES-2016-076440 from MINECO., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Forming Weakly Interacting Multilayers of Graphene Using Atomic Force Microscope Tip Scanning and Evidence of Competition between Inner and Outer Raman Scattering Processes Piloted by Structural Defects

  • Pardanaud, Cedric
  • Merlen, A.
  • Gratzer, K.
  • Chuzel, Olivier
  • Nikolaievskyi, D.
  • Patrone, L.
  • Clair, Sylvain
  • Ramírez-Jiménez, Rafael
  • Andrés, Alicia de
  • Roubin, P.
  • Parrain, J.L.
[EN] We report on an alternative route based on nanomechanical folding induced by an AFM tip to obtain weakly interacting multilayer graphene (wi-MLG) from a chemical vapor deposition (CVD)-grown single-layer graphene (SLG). The tip first cuts and then pushes and folds graphene during zigzag movements. The pushed graphene has been analyzed using various Raman microscopy plots- AD/ AG × EL4 vs ΓG, ω2D vs Γ2D, Γ2D vs ΓG, ω2D+/- vs Γ2D+/-, and A2D-/ A2D+ vs A2D/ AG. We show that the SLG in-plane properties are maintained under the folding process and that a few tens of graphene layers are stacked, with a limited number of structural defects. A blue shift of about 20 cm-1 of the 2D band is observed. The relative intensity of the 2D- and 2D+ bands have been related to structural defects, giving evidence of their role in the inner and outer processes at play close to the Dirac cone., Funding by the Spanish Ministerio de Economía y Competitividad under Project MAT2015-65356-C3-1-R is acknowledged. French PACA Region is acknowledged
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chemical and structural heterogeneities in Nd-doped oxynitride phosphate laser glasses

  • Muñoz, Francisco
  • Jiménez Riobóo, R. J.
  • Balda, Rolindes
The application of oxynitride glasses in optics has been limited due the issues inherent in their preparation that result in bubbles, metallic inclusions or opacity. Although the synthesis of oxynitride phosphates is easier than in silicates, due to their lower melt viscosity, the remaining water in the form of OH causes, for instance, the neodymium luminescence to be negatively affected. We report on the preparation of oxynitride Nd phosphate glasses that are submitted first to a dehydroxylation, so that their structure and properties can be studied as a function of the nitrogen content taking a completely homogeneous OH-free glass as the starting point of each synthesis. Raman and Brillouin Spectroscopy confirmed the segregation in oxide and N-enriched regions, and NMR of the glasses has been used to calculate the O/P ratio from the distribution of P(O,N)4 groups. The difference between this and the experimental one obtained from the elemental analyses confirms the segregation in oxide and oxynitride regions that is produced during the ammonolysis of the phosphate glass. The oxynitride glass network could thus be considered a non-homogeneous mixture of the oxide and the nitrided phases that are segregated due to the non-randomness of the nitridation reaction., The authors thank funding from projects MAT2017-87035-C2-1-P/-2-P, MAT2015-65356-C3-1-R, RTI2018-096918-B-C41 (AEI/FEDER, UE), GIU17/014 (Basque Country University, Spain) and PIBA18-24 (Basque Country Government, Spain)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

In-situ carboxylation of graphene by chemical vapor deposition growth for biosensing

  • Cortijo-Campos, Sandra
  • Álvarez-Fraga, Leo
  • Gonçalves, G.
  • Vila, Mercedes
  • Álvarez Rodríguez, Patricia
  • Menéndez López, Rosa María
  • Andrés, Alicia de
  • Prieto, Carlos
A new approach for in-situ specific functionalization of graphene with carboxylic groups through a single-step growth is presented. Depending on the fabrication parameters, it is possible to synthesize functionalized single layer or multilayer graphene. The homogeneity and functionalization degree are evaluated combining micro-Raman and XPS spectroscopies. The obtained COOH content reaches around 5%, similar to the values obtained by the other methods but with significantly lower contents of the other oxygen groups (carbonyl and hydroxyl) and of other sp defects which are detrimental for electronic transport. The obtained COOH- functionalized single-layer graphene presents optimum values of the sheet resistance, around 8 kΩ, and high mobility, around 800 cmVs. Anchoring of antibodies is demonstrated through the immobilization of IgG1–FITC by the carbodiimide method, showing that these COOH- functionalized single-layer graphene can be very promising materials for electronic sensing applications., Funding by the Spanish Ministerio de Economía y Competitividad (MINECO) under Project MAT2015-65356-C3-1-R and Comunidad de Madrid Excellence Network under Project S2013/MIT-2740 is acknowledged. S.C. acknowledges BES-2016-076440 and L.A.-F. BES-2013-062759 FPI grants from MINECO., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Impact of Tb4+ and morphology on the thermal evolution of Tb-doped TiO2 nanostructured hollow spheres and nanoparticles

  • Colomer, María T.
  • Rodríguez-Díaz, M. Eugenia
  • Morán-Pedroso, María
  • Vattier, Florencia
  • Andrés, Alicia de
[EN] Tb-doped TiO hollow spheres (HSs) in the range 0.0–2.0 at.% have been synthesized by the first time to the best of our knowledge. The HSs are compared with nanoparticles (NPs) to evaluate the impact of morphology on their physicochemical and photoluminescence (PL) behavior upon increasing calcination temperature. After calcination at 550 °C, the particles are anatase with a primary average size of 10.0 ± 0.2 nm for the NPs and 12.0 ± 0.2 nm for those that form the micron sized hollow spheres of 1.8 ± 0.2 μm diameter and ca. 64 nm shell thickness. The temperature of the anatase–rutile transition is found to be strongly dependent on the presence of Tb as well as on morphology. Contrarily to the usual stabilization of anatase when doping with trivalent rare-earth ions, the transition temperature is reduced when doping with Tb. The rutile phase is further favored for the HSs compared to the NPs probably related to the low density of the HSs and/or a more efficient packing density and/or a bigger crystal size of the nanoparticles that form those spheres with respect to the packing and the size of the NPs and/or the crystal size of the nanoparticles of the HSs with respect to the size of the NPs. Only a slight unit-cell volume increase for the anatase structure is observed upon Tb doping, in both the NPs and in the HSs, contrary to the expected increment due to the larger ionic radius of Tb compared to Ti. In addition, the intensity of the characteristic f-f Tb emission bands is extremely weak both in the anatase and rutile phases. The transition is accompanied with the emergence of an infrared emission band centered at 810 nm related to the formation of defects during the structural transformation providing deep levels in the gap that partly quench the f-f emissions in the rutile phase. The results are consistent with the presence of Tb in both +3 and +4 valence states. XPS measurements confirmed the presence of Tb as well as of Tb in both HSs and NPs. The large fraction of Tb present in the samples originates the weak f-f emission intensity, an only slight increase of the cell parameters and the destabilization of the anatase phase., This work was supported by the Science, Innovation and Universities Ministry (Government of Spain) and FEDER Funds under the Grants MAT2016-78700-R, MAT2015-65356-C3-1-R and RTI2018-096918-B-C41. The authors also acknowledge to Mrs. C. Díaz-Dorado for her help in the preparation of TEM, HREM, and FEG-SEM figures.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dehydroxylation processing and lasing properties of a Nd alumino-phosphate glass

  • Muñoz-Quiñonero, Mónica
  • Azkargorta, Jon
  • Iparraguirre, Ignacio
  • Jiménez Riobóo, R. J.
  • Tricot, Gregory
  • Shao, Chongyoun
  • Muñoz, Francisco
  • Fernández, Joaquín
  • Balda, Rolindes
In this work, we have studied the preparation and properties of an alumino-phosphate glass with composition 13Na2O-13K2O-16BaO-4Al2O3-54P2O5 (mol%). The first part of the work deals with the study of the processing conditions of the dehydroxylation of the phosphate glass, which was performed by remelting under N2 flow using graphite crucibles. Glass samples from 5 to 50 g and Nd2O3 doped were submitted to dehydroxylation and the influence of temperature, time, mass of glass and viscosity were correlated with the content of water in the glasses through the coefficient of absorption of OH ions. The network structure of the glasses was also determined by means of 31P and 27Al 1D/2D nuclear magnetic resonance and the local environment of Nd3+ ions was probed by electron paramagnetic resonance. The optimized conditions of processing were then used to obtain a dehydroxylated glass with a 2.5 wt% Nd2O3 whose spectroscopic and laser emission properties were studied. The spectroscopic properties of Nd3+ ions which include, Judd-Ofelt calculation, stimulated emission cross-section of the laser transition, lifetime, and quantum efficiency are presented. Site-selective laser spectroscopy and stimulated emission obtained under selective wavelength pumping along the 4I9/2→4F5/2 absorption band were performed to determine the distribution of crystal field in which the rare earth is located, together with its influence in the pump wavelength dependence of the spontaneous and laser emissions of Nd3+ in this glass matrix., The authors thank funding from projects from Agencia Estatal de Investigación of Spain (FEDER, UE) MAT2017-87035-C2-1-P/-2-P, MAT2015-65356-C3-1-R, RTI2018-096918-B-C41, PID2020-115419GB-C21/C-22, and the project from the Basque Country Government PIBA1824., Peer reviewed