Pasar al contenido principal

NUEVOS SUPERCONDENSADORES HIBRIDOS BASADOS EN ELECTRODOS DE NANOCOMPOSITES DE CARBONO/GRAFENO DERIVADOS DE (OXI)CARBUROS

MAT2016-78700-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2016
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 25
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Formation of carbon nanofibers with Ni catalyst supported on a micro-mesoporous glass

  • Mazo, M. Alejandra
  • Sanguino, Javier
  • Martin-Gullon, Ignacio
  • Rubio, Juan
  • Martin-Gullon, Ignacio|||/items/04aa2bce-ad55-4c4a-ba48-66e07d390b63
The Ni/SiO2 system is one of the most interesting to produce COx-free H2 and valuable carbon nanofibers (CNFs) by the catalytic decomposition of CH4. SiO2 is one of the most effective support while Ni catalyst displays long life and high activity. We studied the catalytic chemical vapor deposition (CCVD) process of CH4 within Ni/glass system at relatively low temperature (600 °C) during long times (3 h), varying the amount of the catalyst (2.3–17.8% Ni(%)) and the carbon source (100:200 to 100:0, CH4:N2). As the amount of Ni and CH4 increases, the formation of CNFs is enhanced giving as a result CNFs/glass materials with more amount, longer and thicker CNFs. The initial microstructure of the glass support and the way of Ni catalyst is deposited play a decisive role. Pristine porous glass displays a microstructe of interconnected mesopores which are progressively filled with Ni, producing ink-bottle pores with open ends. After the CCVD process as the amount of Ni or CH4 increases, the porosity of the Ni-doped glass is reduced due to the progressively filling of the mesopores (4 nm) with CNFs. Furthermore, due to the formation of large entanglements of CNFs new pores appear (20–70 nm) depending on the processing conditions. Fish-bone with hollow core and bamboo-like CNFs are found over the surface and also inside the porous glass support. It is observed a base-growth mechanism due to the strong interaction between the catalyst and the support, which prevents the Ni deactivation enhancing its activity for long times.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Raman characterization and photoluminescence properties of La1-xTbxPO4·nH2O and La1-xTbxPO4 phosphor nanorods prepared by microwave-assisted hydrothermal synthesis

  • Colomer, María T.
  • Bartolomé, Jose F.
  • Ortiz, A.L.
  • Andrés, Alicia de
The effect of the Tb–doping content (in the range 0–100 mol%) on the structure (using Raman spectroscopy) and photoluminescence (PL) properties of both rhabdophane-type LaTbPO·nHO and monazite-type LaTbPO single-crystal nanorods was investigated. LaTbPO·nHO was directly obtained by microwave-assisted hydrothermal synthesis and LaTbPO by calcination of LaTbPO·nHO at 700 °C in air for 2 h. It was found that the characteristic Raman bands shift to higher wavenumbers and become broader with increasing Tb concentration, which is attributed to attendant unit-cell volume reduction. The PL due to the Tb f-f transitions has been studied with continuous and pulsed excitations. The PL intensity increases with doping and is maximum for LaTbPO·nHO and LaTbPO, i.e., for rhabdophane and monazite-type structures, respectively. A quenching effect is detected for concentrations below x=0.05, but constant efficiency is obtained at higher doping. The calcination increases the efficiency by a factor around 2 due to the combined effects of water molecules and defect elimination. The PL decay curves reveal a long lifetime attributable to single Tb ions which is almost independent of doping for monazite nanorods (5–4.5 ms), and a shorter one around 0.2 ms most likely due to Tb dimmers., This work was supported by the Ministerio de Economía y Competitividad (MINECO, Government of Spain) under Grants no. MAT2012-31090, MAT2015-65356-C3-1-R, MAT2016-78700-R and MINECO and FEDER Funds under Grant no. MAT2016-76638-R. Financial support from the Comunidad de Madrid under Grant no. P2013/MIT-2740 is also acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Preparation, thermal and phase evolution and functional properties of non-stoichiometric strontium-doped lanthanum manganite perovskite ceramics

  • Colomer, María T.
  • Ortiz, A.L.
  • López-Domínguez, V.
  • Alonso, José M.
  • García García-Tuñón, Miguel Ángel
Powders of (LaSr)MnO (LSM85) and (LaSr)MnO (LSM80) perovskites have been synthesized and characterized in detail, and then sintered to evaluate their electrical and magnetic properties at low temperatures and at near room temperature. Microstructural observations/analyses after the dilatometric essays show that the perovskites have compositions that deviate from the nominal ones. Furthermore, magnetic characterization of both samples reveals a ferromagnetic behavior with a Curie temperature above 300 K for LSM80 and of 260 K for LSM85. In addition, LSM85 is insulator from 15 up to 300 K, whereas LSM80 is metallic up to 160 K and insulator up to 300 K. This significant discrepancy of behaviour is attributable to structural and compositional differences between the two perovskites., This work was supported by MINECO (Government of Spain) under Grants no. MAT2012-31090, MAT2013-48009-C4-1 and MAT2016-78700-R and MINECO and Feder Funds under Grant no. MAT2013-41012-P. Financial support from a 2016 BBVA Foundation Grant for researchers and culture creators is also acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Kinetic study on the effect of adding P2O5 to the LMAS glass-ceramic, Estudio cinético sobre el efecto de agregar P2O5 a la vitrocerámica LMAS

  • Ariane, Khalissa
  • Tamayo Hernando, Aitana
  • Chorfa, Abdellah
  • Rubio Alonso, Fausto
  • Rubio Alonso, Juan
[EN] Glasses in the LMAS (Li2O, MgO, Al2O3, SiO2) system containing F, CaO, ZrO2, and TiO2weresubjected to crystallization by incorporating P2O5. The glass stability, glass forming ability,and crystallization kinetics have been determined. Crystals of Lithium Aluminum Silicate(LixAlxSi1−xO2), Enstatite (MgSi2O6) and -spodumene (LiAlSi2O6) were detected in the sam-ples containing F, but -spodumene was not observed in the glass-ceramic in its absence.Glasses containing F show a dependence of the activation with the addition of P2O5withenergy values ranging from 426 kJ mol−1to 483 kJ mol−1, being this maximum found for P2O5amounts up to 3 mol%. High concentrations of P2O5and Al2O3improve the glass stability andincrease the crystallization temperature. The most common crystallization mechanism is ofbulk type with a constant number of nuclei. Tw o - and three-dimensional growth of crystalswas observed in glasses containing F but in its absence and at high Al2O3concentration bulkcrystallization with two- and one-dimensional growth is observed., [ES] Vidrios del sistema LMAS (Li2O, MgO, Al2O3, SiO2) y que contienen además F, Ca, ZrO2y TiO2han sido llevados a cristalización mediante la adición de P2O5. La estabilidad vítrea, capaci-dad formadora de vidrio y cinética de cristalización han sido estudiadas. Se ha determinadola presencia de cristales de aluminosilicato de litio (LixAlxSi1−xO2), enstatita (MgSi2O6) y -espodumena (LiAlSi2O6) en los vidrios que contenían F; sin embargo, sin la presenciade este, no se ha podido detectar -espodumena. Los vidrios que contenían F muestranuna dependencia en la energía de activación con el contenido en P2O5, encontrándose val-ores que oscilaban entre 426 kJ/mol y 483 kJ/mol, este último, el máximo encontrado paracontenidos en P2O5de hasta un 3%. A altas concentraciones de P2O5y Al2O3se observó un aumento de la estabilidad vítrea y de la temperatura de cristalización. Durante la cristal-ización, el mecanismo más común observado es una cristalización masiva con un númeroconstante de núcleos. Se observó un crecimiento en dos y tres dimensiones en los cristalesque contenían F, pero en aquellos preparados sin F y a altas concentraciones de Al2O3, lacristalización masiva con crecimiento uni- y bidimensional se apreció preferentemente., The present work was supported by the Algerian Ministry of Higher Education and Scientific Research (Algerian programP. N . E 2016–2017 scholarship fund) and with the collabora-tion of the Institute of Ceramic and Glass ICV-CSIC, Madrid,Spain. This work was developed under the frame of the project MAT2016-78700-R, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Highly micro- and mesoporous oxycarbide derived materials from HF etching of silicon oxycarbide materials

  • Mazo Fernández, María Alejandra
  • Tamayo Hernando, Aitana
  • Rubio Alonso, Juan
[EN] Highly micro-mesoporous silicon oxycarbide-derived carbon materials (SiOC-DC) with elevated specific surface area up to 895 mg and high pore volumes of mesopores (0.3 cmg) and micropores (0.2 cmg) have been obtained by direct etching of SiOC with HF. Initial organic-inorganic hybrids were synthesized by the sol-gel method employing triethoxysilane and polydimethylsiloxane (PDMS) of different molecular weights (550, 1750 and 4200 gmol). These hybrids were pyrolyzed from 1100 to 1400 °C. Short PDMS chains (550 gmol) within the hybrid structure rendered dense SiOC materials after pyrolysis, however long PDMS chains (1750 and 4200 gmol) produced highly micro-mesoporous SiOC materials up to 1300 °C. The etching of SiOC employing HF produced the selective removing of silica nano-domains and as a result highly micro-mesoporous SiOC-DC materials were created. In dense SiOC the HF attack is favoured at the highest temperatures (1400 °C) when the SiOC is more phase separated. On the other hand, in porous SiOC there is an agreement between the pyrolysis temperature and the porosity and, therefore the SiOC materials are etched easier at 1200 °C. SiOC-DC materials are composed by a porous glassy network enriched with carbon (graphene-like carbon and turbostratic carbon) and SiC which present an incipient crystallization., This work was supported by project MAT2016-78700-R financed bySp anish Research Agency and European Regional Development Fund (AEI/FEDER, UE). The authors are also grateful to C. Díaz Dorado forher help with FE-SEM and HR-TEM images.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced electrical and thermal conductivities of silicon oxycarbide nanocomposites containing carbon nanofibers

  • Mazo Fernández, María Alejandra
  • Tamayo Hernando, Aitana
  • Caballero Cuesta, Amador
  • Rubio Alonso, Juan
Novel silicon oxycarbide-carbon enriched composites (SiOC-C) were prepared from mixtures of SiOC and different amounts of carbon nanofibers (CNF) (0–10%) sintered through spark plasma sintering at 1500 °C. During sintering, the SiOC matrix experiences a rearrangement to SiO, SiC and C, and the growth of SiC wires within the material which produce epitaxial graphene-like carbon flakes with AB stacking. Small additions of CNFs (0.5–1%) promote the generation of large amounts of β-SiC which produce more graphene-like carbon. When large amounts of CNFs are added graphene-like carbon and also huge entanglements of turbostratic carbon are formed widespread all over the SiOC-C material. These facts deeply influenced the observed properties. Small additions of CNFs (0.5–1%) produce an improvement of the thermal conductivity of 30% and an enhancement of three orders of magnitude in the electrical conductivity (2.44 × 10 to 1.82 Sm) mainly due to a great increase in both the crystallite size and structural order of SiC and also the presence of graphene-like carbon homogenously dispersed within the SiOC matrix. Further additions of CNFs (10%) continue increasing both thermal and electrical conductivities (40% and 100 Sm, respectively) but such increases are less effectively by the presence of entanglements of turbostratic carbon., This work was supported by projects ENE2012-39385-CO3-01 of the Ministerio de Economía Industria y Competitividad of Spain, and by the project MAT2016-78700-R financed by Spanish Research Agency and European Regional Development Fund (AEI/FEDER, UE).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

An interplay between electronic and structural effects on the photoluminescence decay mechanisms in LaPO4·: N H2O:Tb3+ and LaPO4:Tb3+ single-crystal nanorods

  • Colomer, María T.
  • Díaz-Moreno, Sofía
  • Tamayo Hernando, Aitana
  • Ortiz, A.L.
  • Chaboy, Jesús
[EN] A novel High Energy Resolution Fluorescence Detected X-ray Absorption Spectroscopy (HERFD-XAS) study at the Tb L-edge for the rhabdophane-type LaPO·nHO:Tb and the monazite-type LaTbPO:Tb nanorods is reported. We have observed that the changes in the white-line intensity follow a similar trend to that previously observed in the photoluminescence behaviour of these materials. Those changes have been assigned to the localization of the terbium 5d states and the modification induced by the hybridization with the next neighbours as the terbium content is varied. The interplay between electronic (d-state localization) and structural (local disorder) effects is used to explain the different optical behaviour between the two series of nanorods. The XAS results indicate that the local ordering is a key factor influencing the different emission efficiencies, quenching effects and decay lifetimes observed experimentally for both series of nanorods. The present results indicate that the long lifetime decay process is accounted within a standard single Tb ion scenario, where the structural disorder, favoured by the presence of water molecules in the structure, aids the non-radiative recombination processes. Implications for future use of the white-line intensity in the HERFD-XAS spectra in characterizing other luminescent materials are also discussed., The research leading to these results has been supported by the project CALIPSOplus under the Grant Agreement 730872 from the EU Framework Programme for Research and Innovation HORIZON 2020 and by the Ministerio de Economía y Competitividad (MINECO, Government of Spain) and FEDER funds under Grant no. MAT2016-78700-R and MAT2016-76638-R. We acknowledge Diamond Light Source for time on Beamline I20-Scanning under Proposal SP-15968. The authors are also grateful to Prof. A. de Andrés for her useful suggestions and to Mrs C. Díaz-Dorado for her help in the preparation of TEM and PL pictures.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Preparation of Nanostructured TiO2 Films with High Catalytic Activity and their 3D-Spatial Distribution of Anatase and Rutile Phases

  • Colomer, María T.
  • Campo, Ángel Adolfo del
[EN] In this study, a facile, cheap, scalable, and environmentally friendly method has been developed to prepare nanostructured TiO2 coatings with a high catalytic activity. In addition, a protocol to characterize the prepared films in order to obtain consistent results between their structure, their microstructure, and their catalytic behavior, has been established. For that, two types of TiO2 coatings have been fabricated by applying once TiO2 aqueous suspensions, prepared form commercial nanopowders, by immersion followed by an adequate thermal treatment. The first type of films is constituted by coatings with anatase as single phase, and the second one by films with a rutile molar fraction of XR = 0.07  0.02, determined from grazing incidence X-ray diffraction (GI-XRD) data. High spatial resolution chemical imaging, obtained by confocal Raman microscopy (CRM), of the surface and of the cross-section for the films shows a good distribution of rutile without any segregation of this phase. Furthermore, high resolution electron microscopy (HREM) confirmed the presence of anatase/rutile biphasic domains in those areas in which both phases were previously found together by CRM. In addition, the catalytic data fit to a first-order kinetic model with high catalytic reaction constants (k’), especially when rutile is present. Furthermore, consistent results have been found in this study between textural, structural and microstructural features with catalytic properties for the prepared TiO2 films., This work was supported by MINECO (Government of Spain) and Feder Funds under Grant no. MAT2016-78700-R. The authors are also grateful to Mrs. C. Díaz-Dorado for her help in the preparation of FEG-SEM, TEM, and HREM pictures.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structural-microstructural characterization and optical properties of Eu3+,Tb3+-codoped LaPO4·nH2O and LaPO4 nanorods hydrothermally synthesized with microwaves

  • Colomer, María T.
  • Zur, Lidia
  • Ferrari, Maurizio
  • Ortiz, Ángel L.
[EN] Rhabdophane-type Eu,Tb-codoped LaPO·nHO single-crystal nanorods with the compositions LaEuTbPO·nHO (x = 0–0.03), La TbEuPO·n′HO (y = 0–0.010), and LaTbEuPO·n′′HO (z = 0–0.012) were hydrothermally synthesized with microwaves. It is shown that the Eu,Tb codoping does not affect the thermal stability of these nanorods, which is due to the formation of substitutional solid solutions with both Eu and Tb replacing La in the crystal lattice. Moreover, it is also shown that monazite-type Eu,Tb-codoped LaPO single-crystal nanorods can be obtained by calcining their rhabdophane-type Eu,Tb-codoped LaPO·(n,n′ or n′′)HO counterparts at moderate temperature in air, and that they are thermally stable. It is also observed that, for the same Eu,Tb-codoping content, the monazite-type Eu,Tb-codoped LaPO nanorods exhibit higher photoluminescent efficiency than the rhabdophane-type Eu,Tb-codoped LaPO· (n,n′ or n′′)HO nanorods. Moreover, it is found that the highest photoluminescence emission corresponds to the monazite-type LaEuTbPO nanorods for the La EuTbPO system. However, for those compositions energy transfer from Tb to Eu does not occur. In addition, for an efficient energy transfer to occur, a content of at least 1 mol% Tb is needed in all the studied materials., This work was supported by the Ministerio de Economía y Competitividad (MINECO, Government of Spain) under Grant no. MAT2016-78700-R. The authors also acknowledge Consiglio Nazionale delle Ricerche-CNR for funding through the Short-Term-Mobility (STM) Program. ALO also thanks the MINECO and FEDER funds for granting the project MAT2016-76638-R. The authors are in debt with Dr. J.J. Reinosa and Ms. C. Álvarez-Docio for the PL measurements under 345 nm of selected samples. The authors also acknowledge to Mrs. C. Díaz-Dorado for her help in the preparation of some figures.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of Sr2+ doping on sintering behavior, microstructural development and electrical properties of LaPO4·nH2O nanorods prepared by dry mechanical milling

  • Colomer, María T.
[EN] The effect of Sr doping on the presence of second phases, sintering behavior, microstructural development, and electrical properties of LaPO·nHO nanorods (LaSrPO where x = 0.025 and 0.05) obtained by a dry mechanochemical milling process was investigated. When Sr is present monazite-type LaSrPO nanopowders were obtained instead of rhabdophane-type LaPO·nHO. In addition, Sr doping implies a larger P/La ratio and it enhances the formation of lanthanum tryoxophosphate (La(PO)), a thermodinamically stable phase, in doped samples. Dilatometric studies reveal a shift of the maximum shrinkage rate at lower temperatures for doped samples, with larger shifts with higher Sr contents. This shift is related to the presence of oxygen vacancies but also to a higher content of La(PO). Furthermore, the derivative of the linear shrinkage curves for all the samples showed peaks at temperatures higher than 1300 °C that are associated to the volatilization of PO gas and to the recrystallization of monazite from the incongruent melting of La(PO). After the dilatometric tests at 1500 °C the samples showed polygonal grains with a bimodal size distribution. For the doped samples the smaller grains do not present Sr in their composition and it is related to those grains form from the recrystallization of monazite-LaPO formed in turn from La(PO). The total conductivity of the studied samples (x = 0.05) is higher for the samples sintered at 1000 °C for 1 h than for those sintered at 1500 °C without any dwell time. It can be due in part to the fact that the smaller grains of the samples sintered at 1500 °C do not contain Sr and it can hinder the charge transport., This work has been supported by MINECO (Spain) through the project MAT2016-78700-R. I also wish to thank Mrs. C. Díaz-Dorado for the composition of the figures of this work.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Processing and electrical conductivity of non-stoichiometric lanthanum strontium manganite perovskites prepared from powders synthesized by a polymerizable-complexation route

  • Colomer, María T.
  • Chinarro Martín, Eva
  • Ortiz, Ángel L.
[EN] Perovskite ceramics with non-stoichiometric compositions given by (LaSr)MnO ((LS)M-85) and (LaSr)MnO ((LS)M-80) were obtained by pressureless sintering (1500 °C for 2 h) from powders synthesized by a polymerizable-complexation route and then calcined (500 °C for 1 h). It was found that the two sintered ceramics contain trigonal (i.e., R3̅c) Sr-doped lanthanum manganite as majority phase, and also hexagonal (i.e., P6/m) La(OH) in trace amounts in the case of (LS)M-85 and in abundant amounts in the case of (LS)M-80. The (LS)M-85 ceramic is stable and therefore usable, whereas on the contrary the (LS)M-80 ceramic eventually swelled and turned into a powder due to the abundant La(OH) that uptakes water from the atmosphere. Finally, it was found that the (LS)M-85 ceramic has appropriate electrical properties for use as cathode in solid oxide fuel cells, with a total conductivity of ~ 145 S/cm at 1000 °C and an activation energy of 0.067(2) eV., This work was supported by MINECO (Government of Spain) and Feder Funds under Grants no. MAT2016-78700-R, MAT2016-76638-R and ENE2013-49111-C2-1-R. The authors also acknowledge to Mrs. M. Fernández and Mrs. R. Navidad for their experimental help, and to Mrs. C. Díaz-Dorado for her help in the preparation of figures.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Impact of Tb4+ and morphology on the thermal evolution of Tb-doped TiO2 nanostructured hollow spheres and nanoparticles

  • Colomer, María T.
  • Rodríguez-Díaz, M. Eugenia
  • Morán-Pedroso, María
  • Vattier, Florencia
  • Andrés, Alicia de
[EN] Tb-doped TiO hollow spheres (HSs) in the range 0.0–2.0 at.% have been synthesized by the first time to the best of our knowledge. The HSs are compared with nanoparticles (NPs) to evaluate the impact of morphology on their physicochemical and photoluminescence (PL) behavior upon increasing calcination temperature. After calcination at 550 °C, the particles are anatase with a primary average size of 10.0 ± 0.2 nm for the NPs and 12.0 ± 0.2 nm for those that form the micron sized hollow spheres of 1.8 ± 0.2 μm diameter and ca. 64 nm shell thickness. The temperature of the anatase–rutile transition is found to be strongly dependent on the presence of Tb as well as on morphology. Contrarily to the usual stabilization of anatase when doping with trivalent rare-earth ions, the transition temperature is reduced when doping with Tb. The rutile phase is further favored for the HSs compared to the NPs probably related to the low density of the HSs and/or a more efficient packing density and/or a bigger crystal size of the nanoparticles that form those spheres with respect to the packing and the size of the NPs and/or the crystal size of the nanoparticles of the HSs with respect to the size of the NPs. Only a slight unit-cell volume increase for the anatase structure is observed upon Tb doping, in both the NPs and in the HSs, contrary to the expected increment due to the larger ionic radius of Tb compared to Ti. In addition, the intensity of the characteristic f-f Tb emission bands is extremely weak both in the anatase and rutile phases. The transition is accompanied with the emergence of an infrared emission band centered at 810 nm related to the formation of defects during the structural transformation providing deep levels in the gap that partly quench the f-f emissions in the rutile phase. The results are consistent with the presence of Tb in both +3 and +4 valence states. XPS measurements confirmed the presence of Tb as well as of Tb in both HSs and NPs. The large fraction of Tb present in the samples originates the weak f-f emission intensity, an only slight increase of the cell parameters and the destabilization of the anatase phase., This work was supported by the Science, Innovation and Universities Ministry (Government of Spain) and FEDER Funds under the Grants MAT2016-78700-R, MAT2015-65356-C3-1-R and RTI2018-096918-B-C41. The authors also acknowledge to Mrs. C. Díaz-Dorado for her help in the preparation of TEM, HREM, and FEG-SEM figures.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of Nd3+ Doping on the Structure, Thermal Evolution and Photoluminescence Properties of Nanoparticulate TiO2 Xerogels

  • Colomer, María T.
  • Roa, Carlos
  • Ortiz, Ángel L.
  • Ballesteros, Luz M.
  • Molina, Pablo
[EN] Undoped and Nd-doped xerogels (Nd-dopant content in the range 0.5–10 mol%) were obtained from colloidal sols in turn prepared by a “green sol-gel route” in aqueous media. The as-synthesized xerogels were characterized by X-ray diffractometry (XRD), high resolution electron microscopy (HREM) together with selected area electron diffractometry (SAED), and Raman spectroscopy (RS), finding that they crystallize as tiny nanocrystals of anatase with traces of brookite and rutile. The thermal stability of the as-synthesized xerogels was next studied in-situ by X-ray thermo-diffractometry (XRTD) as well as ex-situ by XRD, HREM/SAED, and RS on xerogels calcined at different temperatures (400–900 °C), concluding that Nd doping results in the formation of substitutional solid solutions with enlarged unit-cell volume that (i) stabilizes the anatase phase retarding the onset of its transformation to rutile to ever higher temperatures and (ii) provides the anatase nanocrystals with superior resistance to crystal growth. It was also found that NdTiO eventually precipitates at high temperatures when the Nd-dopant content is equal to or higher than 3 mol%, which leaves the still-existing anatase nanocrystals without stabilizer cations therefore causing their immediate transformation to rutile. Finally, the photoluminescence (PL) behaviour of the Nd-doped TiO xerogels with both anatase and rutile crystal structures was investigated and critically compared, observing that the PL emission (i) increases with increasing crystallinity of the host nanocrystals, (ii) decreases above a certain optimal Nd-dopant content due to concentration quenching, and (iii) is much greater for rutile host matrices. In this scenario, the 3 mol% Nd-doped rutile xerogel maximized the PL emission, emitting at both ∼915 and 925 nm due to the existence of two distinct local crystal fields for the Nd cations., This work was supported by the Ministerio de Economía y Competitividad (Government of Spain) and FEDER Funds under the Grants nº MAT2016-76638-R, MAT2015-67586-C3-2-R, and MAT2016-78700-R.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structural, textural and electrochemical relationships in HF etched cobalt-silicon micro/mesoporous oxycarbides

  • Tamayo Hernando, Aitana
  • Rodríguez González, M. Ángeles
  • Colomer, María T.
  • Sánchez, Elizabeth
  • Mazo Fernández, María Alejandra
  • Rubio Alonso, Juan
[En] Cobalt-silicon oxycarbide materials (Co–SiOC) have been produced through the polymer-derived ceramic route by incorporating Cobalt acetate in different proportions. HF etching of the obtained materials leads to obtaining C-rich Co–SiOC materials where the constituent phases present different characteristics. The SiO units that were the most vulnerable to the chemical attack were the most tensioned ones which are connected at the edges of the graphitic planes. The carbonaceous nanostructures in the HF-etched materials present a different ordering degree which is related with the microstructural characteristics of the pyrolyzed precursors. In addition, the electrochemical performance turns out to be dependent not solely on the Co content but also to the graphitization degree of the carbonaceous phase., A. Tamayo acknowledges the financial support from Fundacion General CSIC and the program COMFUTURO. This research has been developed under the frame of the project MAT2016-78700-R from the Spanish Ministry of Economics and Competitiveness. We want to acknowledge Lucia Salvador for her inestimable assistance in the electrochemical measurements.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Characterization of polymer-derived ceramers subjected to wet-etching and the evolution of the carbon phase during thermal conversion

  • Tamayo Hernando, Aitana
  • Rubio Alonso, Fausto
  • Colomer, María T.
  • Arroyo, Carmen
  • Rodríguez González, M. Ángeles
[Èn] The present work is focused on revealing the structural, textural and electrochemical characteristics of the carbon phases developed during the pyrolysis of commercial preceramic precursors in the presence of cobalt. At intermediate pyrolysis temperature, Cobalt is capable of forming labile carbides into the preceramic polymer network that, upon decomposition, lead to the formation of ordered carbonaceous structures during the thermal conversion. Etching with HF removes the undesirable SiO-like phase allowing, for the first time, to detect the presence of Co-carbon nano-onions (Co@CNO) in silicon oxycarbide ceramers. These ordered Co@CNO were formed at pyrolysis temperatures ranged between 700 and 800 °C but a further increase of the temperature induces a significant disorder into the carbon phase and incorporation of the C in the ceramic structure, as deduced from the spectroscopic characterization of these materials., A. Tamayo acknowledges the financial support from Fundacion General CSIC and the COMFUTURO program. This work was developed under the frame of the project MAT2016-78700-R
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of Fe2O3 on the structure and near-infrared emissivity of aluminosilicate glass coatings

  • Gahmousse, Abdelaziz
  • Ferria, Kouider
  • Rubio Alonso, Juan
  • Cornejo, Nilo
  • Tamayo Hernando, Aitana
The present paper reports on the development of a vitreous material with high near-infrared (NIR) emissivity. Silica-based glasses (SiO, NaO, AlO, KO) with different FeO (hematite) contents are deposited on ceramic tiles as coatings and annealed at 1250 °C. Using the indirect radiometric measurement method, the emissivity of the materials was determined at room temperature, where the spectral directional reflectance of the coatings was measured. The samples possessing high emissivity values of 0.78–0.80 in the near-infrared are those with the highest FeO contents. Colorimetric test (L*a*b*), has revealed that the glass coating goes darker red by adding more amount of FeO. XRD analysis has shown the magnetite, hematite, and nepheline crystallization phases in the glasses with FeO contents above 30 wt%. Readable aspects of FTIR absorbance spectra were found, which gave information about the structure variations of these glasses as a function of FeO content, also, SEM photographs displayed morphology of the prepared glass coatings., The present work was supported by the Algerian Ministry of Higher Education and Scientific Research (Algerian program P.N.E 2019–2020 scholarship fund) and by project MAT2016-78700-R financed by Spanish Research Agency and European Regional Development Fund (AEI/FEDER, UE).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Further insights into the electrical and thermal properties of carbon enriched silicon oxycarbide composites

  • Mazo Fernández, María Alejandra
  • Caballero Cuesta, Amador
  • Rubio Alonso, Juan
[EN] Cheap, abundant and easily-obtained carbon fillers such as graphite (GR), carbon black (CB), lamp black and active carbon were successfully incorporated into a silicon oxycarbide (SiOC) matrix using attrition milling followed by spark plasma sintering to obtain dense crack-free bulk composites. Carbon-enriched SiOC composites (C-SiOC) showed enhanced electrical (σ) and thermal (k) conductivities. Values as high as 667 Sm-1 for σ and an increase of 63% for k compared with SiOCs were obtained when GR flakes were in corporated into the SiOC. Very interesting values were also achieved (250 Sm-1 and a 46% increase) when CB was used, due to the formation of a percolating network of highly-interconnected tortuous graphene-like carbon domains which promoted phonon/electron transport. Raman parameters such as the tortuosity index, 3D ordering of graphene layers and the I2D/IG ratio, in conjunction with AB stacking, were crucial for understanding the electronic and/or phonon transport., This work was supported by project MAT2016–78700-R financed by the Spanish Research Agency and the European Regional Development Fund (AEI/FEDER, EU)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Silicon oxycarbide and silicon oxycarbonitride materials under concentrated solar radiation

  • Mazo Fernández, María Alejandra
  • Padilla, Isabel
  • López-Delgado, Aurora
  • Tamayo Hernando, Aitana
  • Rubio Alonso, Juan
The potential application of silicon oxycarbonitride (SiOCN), silicon oxycarbide (SiOC) and silicon oxycarbide¿SiC (SiOC¿SiC) for photothermal devices such as volumetric solar absorbers has been studied evaluating the response to thermal shock from a Fresnel lens. The accelerated ageing test comprises fast heating (32¿C min¿1 ) and cooling rates (27¿C min¿1 ) from 100 to 1000¿C and dwelling times of 10 min. Porous materials (SiOCNp and SiOCp) failed the thermal shock tests; they were massively degraded by the formation of a large depression in the focus of solar radiation. Dense materials (SiOCd and SiOC¿SiCd) withstood 100 cycles of thermal shock ageing tests due to the formation of a protective silica layer. The absorptance values for dense materials remained fairly constant before and after thermal shock tests: from 94.5 to 94.3% for SiOCd and from 93.3 to 93.3% for SiOC¿SiCd . These preliminary studies indicate their potential for high-temperature solar receiver applications., This research was funded by MINISTERIO DE ECONOMÍA, INDUSTRIA Y COMPETITIVIDAD OF SPAIN, [ENE2012-39385-CO3-01] and SPANISH RESEARCH AGENGY AND THE EUROPEAN REGIONAL DEVELOPMENT FUND (AEI/FEDER, UE), [MAT2016-78700-R].We acknowledge support of the publication fee by the Spanish National Research Council (CSIC) Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Estudio del envejecimiento acelerado bajo radiación solar concentrada de vidrios de oxicarburo como receptores de alta temperatura

  • Mazo Fernández, María Alejandra
  • Padilla, Isabel
  • Tamayo Hernando, Aitana
  • López-Delgado, Aurora
  • Rubio Alonso, Juan
La energía solar y en especial los sistemas de energía solar concentrada (ESC) necesita materiales que puedan soportar sus exigentes condiciones de trabajo. En este sentido los receptores están sometidos a grandes flujos de radiación solar que dan lugar a elevadas temperaturas. Además, debido a la propias condiciones ambientales los sistemas de ESC se encuentran sometidos a grandes fluctuaciones de temperatura durante el día o la noche o en condiciones meteorológicas adversas, siendo éstos los principales factores de envejecimiento, sin que puedan quedar excluidos otros efectos como la humedad ambiental, atmósferas salinas u otros agentes contaminantes de zonas industriales. Los vidrios de oxicarburo (SiOC) son materiales compuestos formados por una fase de SiOC (matriz) y otra de C (refuerzo) homogéneamente dispersa, por lo que se considera que pueden ser unos candidatos idóneos como receptores solares, debido a sus buenas propiedades intrínsecas, tales como su elevada resistencia frente a la oxidación y a ambientes agresivos a elevadas temperaturas, buenas propiedades mecánicas, etc. En este trabajo nos hemos centrado en la evaluación de la resistencia de los composites (SiOC porosos y densos) frente al choque térmico producido en una lente Fresnel que concentra la radiación solar más de 2600 veces. Para ello el material estudiado se ha sometido a 100 ciclos de calentamiento (velocidad: 32 ºC s-1) desde temperatura ambiente hasta 1000 ºC durante 10 min, seguidos de un enfriamiento rápido (velocidad: 27 ºC s-1). La evolución de la superficie del material se ha llevado a cabo mediante microscopia confocal y microscopia electrónica de barrido, así como con espectroscopia infrarroja, Raman y UV-Vis. Los materiales porosos sufren una degradación severa desde los primeros ciclos de tratamiento, mientras que los materiales densos permanecen prácticamente inalterados tras los ciclos de choque térmico ensayados., Los autores agradecen al Dr. J.I. Robla Villalba por su ayuda con los sistemas de medida de la temperatura. Este trabajo ha sido financiado por los proyectos ENE2012-39385-CO3-01 (Investigación en Materiales y Diseños Innovadores para Receptores Avanzados Solares (MIRASOL) del Ministerio de Economía Industria y Competitividad de España y por el proyecto MAT2016-78700-R financiado por la Agencia Española de Investigación y los Fondos Europeos de Desarrollo Regional (Nuevos supercondensadores híbridos basados enelectrodos de Nanocomposites de carbono/grafeno deirivados de oxicarburos.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hierarchical porous fluorine-doped silicon oxycarbide derived materials: Physicochemical characterization and electrochemical behaviour

  • Mazo Fernández, María Alejandra
  • Colomer, María T.
  • Tamayo Hernando, Aitana
  • Rubio Alonso, Juan
[EN] Novel hierarchical micro-meso-macroporous fluorine-doped silicon oxycarbide derived materials have been obtained by HF etching of silicon oxycarbides pyrolyzed at different temperatures. The influence of etching time (1 or 24 h) and pyrolysis temperature (from 1100 to 1400 °C) on the selective removal of the silica nano-domains present in the silicon oxycarbide and the appearance of oxygen and fluorine functionalities have been determined and evaluated in terms of their electrochemical response. The insertion of fluorine in the silicon oxycarbide matrix (Si–O(F) bonds) and free carbon phase (C–F semi-ionic and C–F covalent bonds) was corroborated. The materials pyrolyzed at 1300–1400 °C and etched during 24 h show values of specific capacitance as high as 225-165 Fg (0.1–30 Ag) using a symmetrical configuration and HSO 1 M as electrolyte. These materials displayed energy density values of 28-19 Whkg (0.1–45 kWkg). The hierarchical microstructure in conjunction with the oxygen and fluorine functionalities are essential in order to explain their good electrochemical response. In particular, those materials present the highest amount of meso (3–10 nm) and larger meso-macropores and the highest content of fluorine in their composition. Then, fluorine-doped silicon oxycarbide derived materials can be potentially used as electrodes for supercapacitors in the field of energy storage applications., This work was supported by project MAT2016-78700-R financed by Spanish Research Agency and European Regional Development Fund (AEI/FEDER, EU). The authors are also grateful to C. Díaz Dorado for her help with the revision of the figures. We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mechanical response of silicon oxycarbide materials processed by spark plasma sintering

  • Mazo Fernández, María Alejandra
  • Soriano, David
  • Rubio Alonso, Juan
[EN] Nano- and micro-indentation experiments have been used to evaluate the mechanical properties of dense silicon oxycarbide (SiOC) derived materials obtained by spark plasma sintering (SPS). The sintering temperature varied from 1300 to 1700 °C, with a pressure of 40 MPa. The relationship between the mechanical properties and densification, porosity, evolution of the composition, structure and crystallization depending on the SPS sintering temperature has been determined. The SiOC sample obtained at 1400 °C shows the highest values of hardness (12 GPa) and elastic modulus (95 MPa) in both nano- and micro-indentation tests. The SPS treatment produces a neat densification of the material without promoting the phase separation of the Si–O–C matrix. In terms of the elasto-plastic behaviour, hf/hmax >0.5 and Wel/Wtot <0.7, in conjunction with AFM images, highlight the negligible formation of pile-ups. The elastic recovery is quite high, and is probably due to the flexible segregated carbon phase. The Vickers indentation patterns show the Hertzian cones typical of anomalous glasses. Some minor radial cracks can also be seen, and can be attributed to the presence of both stiffer Si–C bonds which reduce the propagation of cracks, and to carbon, which reduces the brittleness of the SiOC derived materials., This work was supported by project MAT2016–78700-R financed by the Spanish Research Agency and the European Regional Development Fund (AEI/FEDER, EU); and project ENE2012-39385-CO3-01 funded by the Spanish Ministry of Economy, Industry and Competitiveness. We acknowledge support for the publication fee from the Spanish National Research Council (CSIC) Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Highly Porous Carbon Materials Derived from Silicon Oxycarbides and Effect of the Pyrolysis Temperature on Their Electrochemical Response

  • Mérida, José
  • Colomer, María T.
  • Rubio Alonso, Fausto
  • Mazo Fernández, María Alejandra
[EN] he design of a material porous microstructure with interconnected micro-meso-macropores is a key issue for the successful development of carbon-derived materials for supercapacitor applications. Another important issue is the nature of these carbon materials. For those reasons, in this study, novel hierarchical micro-meso-macroporous silicon oxycarbide-derived carbon (SiOC-DC) was obtained via chlorine etching of carbon-enriched SiOC prepared via pyrolysis (1100–1400 °C) of sol-gel triethoxysilane/dimethyldiphenysiloxane hybrids. In addition, and for the first time, non-conventional Raman parameters combined with the analysis of their microstructural characteristics were considered to establish their relationships with their electrochemical response. The sample pyrolyzed at 1100 °C showed planar and less-defective carbon domains together with the largest specific surface area (SSA) and the highest volume of micro-meso-macropores, which upgraded their electrochemical response. This sample has the highest specific capacitance (Cs = 101 Fg−1 (0.2 Ag−1)), energy (Ed = 12–7 Wh−1 kg−1), and power densities (Pd = 0.32–35 kw kg−1), showing a good capacitance retention ratio up to 98% after 10,000 charge–discharge cycles at 0.5 Ag−1. At a pyrolysis temperature ≥ 1200 °C, the carbon domains were highly ordered and tortuous with a high degree of interconnection. However, SSA and pore volumes (micro-meso-macropores) were significantly reduced and downgraded the Cs, Ed, and Pd values., This research was funded by Ministerio de Industria, Comercio y Turismo and European Union (Next Generation EU), [VEC-010000-2022-10], as well as the Spanish Ministerio de Economía y Competitividad and the European Regional Development Fund (AEI/FEDER, UE), [MAT2016-78700-R]., Supplementary Materials: The following supporting information can be downloaded at: https: //www.mdpi.com/article/10.3390/ijms241813868/s1, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Novel silicon oxycarbide/spodumene glass-ceramic composites with tailored thermal expansion coefficient

  • Mazo Fernández, María Alejandra
  • Rubio Alonso, Juan
[EN] Highly densified silicon oxycarbide (SiOC)/spodumene composites with low coefficient of thermal expansion (CTE) were obtained just selecting the spark plasma sintering temperature employed. For the first time we proposed the use of spodumene a cheap and natural available lithium aluminium silicate mineral as meltable/active filler for SiOC-derived composites, due to its powerful fluxing properties and also its very low CTE. SiOC/spodumene composites sintered at 1200 ⁰C display a very low CTE (0.128±0.004–1.902±0.002 × 10−6 K−1) due to the α,β-transformation of spodumene. At higher sintering temperatures the CTE increases to 3.288±0.004 × 10−6 and 4.516±0.006 × 10−6 K−1 (1300 and 1400 ⁰C) due to the β-SiC formation. In this range of temperature, spodumene promotes the phase separation of SiOC and subsequent crystallization of cristobalite and β-SiC. The maximum values of hardness (11.5 ± 0.5 GPa) and elastic modulus (91±4 MPa) are reached at 1300 ⁰C, where the SiOC/composite displays a neat densification and the lowest roughness (1.61±0.01 nm)., This work was supported by project MAT2016–78700-R financed by the Spanish Research Agency and the European Regional Development Fund (AEI/FEDER, EU) and project ENE2012-39385-CO3-01 funded by Ministry of Economy, Industry and Competitiveness of Spain. We acknowledge support of the publication fee by the Spanish National Research Council (CSIC) Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI). The authors acknowledge C. Díaz-Dorado for her help in the preparation of AFM figures., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Improved electrical and thermal properties of silicon oxycarbide/spodumene composites

  • Mazo Fernández, María Alejandra
  • Caballero Cuesta, Amador
  • Rubio Alonso, Juan
[EN] Novel bulk SiOC/spodumene composites have been developed by spark plasma sintering (SPS) at relatively low temperature (1200–1400 °C). Spodumene is a cheap and natural available lithium aluminosilicate mineral which acts as meltable/active filler. At 1300–1400 °C, the Al migrates toward the glassy matrix producing a Si-Al-O network and the crystallization of α-cristobalite. The Cfree phase also experiences a deep transformation. The epitaxial growth of few-layered graphene over SiC particles occurs at 1400 °C. An increase in the phonon transport is observed (36%, 1.28 – 2.14 Wm−1K−1) associated to the reduction of the interface resistance between the partially crystallized SiO2 matrix and the SiC nano-wires/graphene-like carbon conductive phase. The electrical conductivity increases (1.14 ×10−2 – 8.1 Sm−1) due to the densification reached and an increasing ordering degree of the tortuous Cfree phase with a high quality of interconnection and crystallization. Raman parameters are determinant to understand the thermal and electrical response., This work was supported by project MAT2016–78700-R financed by the Spanish Research Agency and the European Regional Development Fund (AEI/FEDER, EU) and project ENE2012–39385-CO3–01 funded by Ministry of Economy, Industry and Competitiveness of Spain. We acknowledge support of the publication fee by the Spanish National Research Council (CSIC) Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of P2O5 and Al2O3 on crystallization, structure, microstructure and properties of Li2O–MgO–Al2O3–SiO2–TiO2–ZrO2 glass ceramics, Efecto del P2O5 yAl2O3 en la cristalización, estructura, microestructura y propiedades de vitrocerámicos del sistema Li2O-MgO-Al2O3-SiO2-TiO2-ZrO2

  • Ariane, Khalissa
  • Tamayo Hernando, Aitana
  • Abdellah Chorfa
  • Rubio Alonso, Fausto
  • Rubio Alonso, Juan
[EN] The structure, microstructure, thermal and mechanical properties of glasses and glass-ceramics in the LMAS (Li2O, MgO, Al2O3, SiO2) system and the effect of P2O5 and Al2O3 additives have been studied. The transition temperatures of both glasses and glass-ceramics increase with the P2O5 and Al2O3 concentration, but at high temperatures the melt viscosity decreases. The main crystalline phases formed are lithium aluminium silicate, enstatite and β-spodumene, being the growth of β-spodumene favoured by fluorine ions, P2O5 and the heat treatment temperature as well. Raman and FT-IR spectroscopies have shown the formation a silica-rich glass phase which acts as a matrix of the crystallites containing Al2O3 and P2O5 in its composition. The shape and aspect ratio of the crystallites depend on the Al2O3 concentration. For low Al2O3 concentration a variety of tubular, granular and plate-like crystals appear, while for high Al2O3 concentration the main shape of the crystals is spherical or globular. Hv, E and CTE properties are related to the crystalline phases formed during the crystallization treatment, and their variations are in accordance with the increase of the crystal aspect ratio. The CTE values of the GCs decrease as the P2O5 content increases up to 3%, while for the Al2O3 concentration of 16% the minimum CTE value is obtained. Hv and E values of the GCs are higher than those corresponding to their respective parent glasses. According to these values, these glasses and glass-ceramics are not appropriate for machining., [ES] En este trabajo se ha estudiado el efecto del contenido en P2O5 y Al2O3 en vidrios y vitrocerámicos del sistema LMAS (Li2O, MgO, Al2O3, SiO2) en su estructura, microestructura y propiedades térmicas y mecánicas. La adición de estos dos óxidos produce el aumento de las temperaturas de transición tanto de los vidrios como de los vitrocerámicos correspondientes, sin embargo, la viscosidad a alta temperatura decrece. Las fases cristalinas que se forman son fundamentalmente silicato de litio-aluminio, enstatita y β-espodumena, donde el crecimiento de β-espodumena está favorecido por la presencia de iones F, P2O5 así como por la temperatura de tratamiento. Las espectroscopias Raman y FTIR han permitido detectar la formación de una fase vítrea rica en sílice que actúa como matriz de los cristales que contienen Al2O3 y P2O5 en su composición. La microestructura cristalina depende de la concentración de y Al2O3 en los vidrios. Para bajas concentraciones de Al2O3 se originan cristales con formas tubulares o con formas mientras que para altas concentraciones de Al2O3 los cristales tienen forma esférica o globular fundamentalmente. Los valores de HV, E y CTE están relacionados con las fases cristalinas formadas durante el tratamiento de cristalización, y sus variaciones están relacionados con el factor de forma de los cristales. Los valores de CTE de los vitrocerámicos disminuyen a medida que el contenido de P2O5 aumenta hasta un 3%, mientras que para la concentración de Al2O3 del 16% se obtiene el valor mínimo de CTE. Los valores Hv y E de los GC son más altos que los correspondientes a sus respectivos vidrios principales. Estos valores indican que estos materiales, tanto vidrios como vitrocerámicos, no son apropiados para ser mecanizados., The present work was supported by the Algerian Ministry of Higher Education and Scientific Research (Algerian program P.N.E 2016-2017 scholarship fund) and with the collaboration of the Institute of Ceramic and Glass ICV-CSIC, Madrid, Spain supported by project MAT2016-78700-R financed by Spanish Research Agency and European Regional Development Fund (AEI/FEDER, UE). The authors are also grateful to C. Díaz Dorado for her help with FE-SEM images., Peer reviewed