Pasar al contenido principal

VIDRIOS Y VITROCERAMICOS NANOESTRUCTURADOS DOPADOS CON TIERRAS RARAS PARA APLICACIONES FOTONICAS

PID2020-115419GB-C22

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DEL PAIS VASCO EUSKAL HERRIKO UNIBERTSITATEA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 20
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dehydroxylation processing and lasing properties of a Nd alumino-phosphate glass

  • Muñoz-Quiñonero, Mónica
  • Azkargorta, Jon
  • Iparraguirre, Ignacio
  • Jiménez Riobóo, R. J.
  • Tricot, Gregory
  • Shao, Chongyoun
  • Muñoz, Francisco
  • Fernández, Joaquín
  • Balda, Rolindes
In this work, we have studied the preparation and properties of an alumino-phosphate glass with composition 13Na2O-13K2O-16BaO-4Al2O3-54P2O5 (mol%). The first part of the work deals with the study of the processing conditions of the dehydroxylation of the phosphate glass, which was performed by remelting under N2 flow using graphite crucibles. Glass samples from 5 to 50 g and Nd2O3 doped were submitted to dehydroxylation and the influence of temperature, time, mass of glass and viscosity were correlated with the content of water in the glasses through the coefficient of absorption of OH ions. The network structure of the glasses was also determined by means of 31P and 27Al 1D/2D nuclear magnetic resonance and the local environment of Nd3+ ions was probed by electron paramagnetic resonance. The optimized conditions of processing were then used to obtain a dehydroxylated glass with a 2.5 wt% Nd2O3 whose spectroscopic and laser emission properties were studied. The spectroscopic properties of Nd3+ ions which include, Judd-Ofelt calculation, stimulated emission cross-section of the laser transition, lifetime, and quantum efficiency are presented. Site-selective laser spectroscopy and stimulated emission obtained under selective wavelength pumping along the 4I9/2→4F5/2 absorption band were performed to determine the distribution of crystal field in which the rare earth is located, together with its influence in the pump wavelength dependence of the spontaneous and laser emissions of Nd3+ in this glass matrix., The authors thank funding from projects from Agencia Estatal de Investigación of Spain (FEDER, UE) MAT2017-87035-C2-1-P/-2-P, MAT2015-65356-C3-1-R, RTI2018-096918-B-C41, PID2020-115419GB-C21/C-22, and the project from the Basque Country Government PIBA1824., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spectro-temporal behavior of dye-based solid-state random lasers under picosecond pumping regime

  • Iparraguirre, Ignacio
  • Azkargorta, Jon
  • García-Revilla, Sara
  • Fernández, Joaquín
  • Balda, Rolindes
In this work, the spectral and temporal properties of the random laser emission from dye-doped solid state powders are investigated in picosecond pumping regime. Ultrafast time-resolved spectroscopy achieved with a streak-camera has been used to perform a detailed study of the temporal evolution of the spectrum of their single pulses. Under conditions of low population inversion density, it is observed that the detected radiation occurs as isolated peaks with a very narrow spectro-temporally spread (ΔωΔt≅1). This behavior remains under conditions of high population inversion density, suggesting that the underlying physical mechanism that produces the emission is the same whatever the pumping conditions. Measurements carried out by varying the numerical aperture of the detection system show that each detected peak within a single pulse is associated with a photon pack emitted in a random direction and wavelength. The relationship between the distribution of paths lengths done by photons inside the active medium, and the gain explains the observed behavior., Eusko Jaurlaritza (PIBA 2018-24); Ministerio de Economía y Competitividad (MINECO MAT2017-87035-C2-2_P, MINECO PID 2020-115419GB-C21/C22)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spectro-temporal behavior of dye-based solid-state random lasers under picosecond pumping regime: part II

  • Iparraguirre, Ignacio
  • Azkargorta, Jon
  • García-Revilla, Sara
  • Fernández, Joaquín
  • Balda, Rolindes
In a very recent work the spectral and temporal properties of the random laser emission from solid state dye-doped powders have been investigated by the authors in picosecond pumping regime. The emission shows within each pulse, peaks of more intensity than background, and of a spectro-temporal width at the theoretical limit (ΔωΔt≅1), even in conditions well below the threshold. The relationship between the distribution of paths lengths traveled by photons inside the active medium, and the amplification by stimulated emission explains this behavior. The aim of the present work is to propose a simple model that, in addition to explaining these characteristics of the emission, is compatible with the energetic properties of the material. Particularly interesting is the behavior predicted by the model for the emission decay in sub-threshold conditions, as well as its very good fit with the experimental measurements and its comparison with the one found in low dispersive media, that shows the decisive effect of scattering. The set of results is hardly compatible with a mode structure., Ministerio de Economía y Competitividad (PID2020-115419GB-C21/C22); Eusko Jaurlaritza (PIBA 2018-24)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Rare-earth doped transparent oxyfluoride glass-ceramics: processing is the key [Invited]

  • Cruz, María Eugenia
  • Sedano, Mercedes
  • Castro Martín, Yolanda
  • Pascual, M. Jesús
  • Fernández, Joaquín
  • Balda, Rolindes
  • Durán, Alicia
Oxyfluoride glass-ceramics (OxGCs) are transparent materials composed by an oxide glass matrix with homogeneously distributed fluoride nanocrystals. In particular, OxGCs with RE-doped lanthanide-fluoride nanocrystals are of special interest for photonic applications. More than 600 publications including several review papers were indexed on Scopus related to “glass-ceramics” revealing the importance of the topic. Melt-quenching followed by thermal treatment, is the most used preparation method, which allows materials in bulk and fibre form to be obtained, being also a scalable industrial process. Spark plasma sintering from glass powders is showing promising results. The sol-gel process has appeared as an alternative method to avoid some of the drawbacks of the melting process such as the high temperature. It also permits to process materials with different shapes such as thin films, nano-sized powders or bulk materials at very low temperature. This paper reviews the different aspects involved in the preparation of OxGC materials by melt-quenching, spark plasma sintering and sol-gel and how the processing parameters directly affect the glass-ceramics properties from results of the GlaSS research group from CSIC. A comparison of the thermal, structural and optical properties is discussed along with some perspectives for preparing other advanced materials within this field., The authors acknowledge financial support from MICINN under project PID2020-115419GB-C21/C-22/AEI/10.13039/501100011033. This article is a part of dissemination activities of the project FunGlass, which has received funding from the European Uniońs Horizon 2020 research and innovation program under grant agreement No 739566., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

KLaF4:Nd3+ doped transparent glass-ceramics processed by spark plasma sintering

  • Babu, Singarapu
  • Balda, Rolindes
  • Fernández Lozano, José Francisco
  • Sedano, Mercedes
  • Gorni, Giulio
  • Cabral, A. A.
  • Galusek, Dušan
  • Durán, Alicia
  • Pascual, M. Jesús
Transparent oxyfluoride glass-ceramics (GCs) containing KLaF4 nanocrystals (NCs) doped with Nd3+were prepared by Spark Plasma Sintering (SPS). Glass powder pellets were sintered under a vacuum atmosphere, optimizing the processing parameters such as particle size, pressure, temperature, and holding time to obtain full densification. Transparency decreased when decreasing the particle size due to higher carbon contamination from the die. The α-KLaF4 crystalline phase was identified by X-ray diffraction (XRD) and its average crystal size was 10–20 nm. High-resolution transmission electron microscopy (HR-TEM) confirmed the presence of KLaF4 nanocrystals with incorporated Nd3+ions. Low-temperature site-selective emission and excitation spectra of Nd3+ions confirmed that α- KLaF4 was the predominant polymorph, although a minor presence of β- KLaF4 was also demonstrated., This work was supported by MINECO under Projects MAT2017–87035-C2–1-P/−2-P (AEI/FEDER, UE), PID2020–115419GB-C-21/C-22 and Basque Country Government PIBA2018–24. AAC also thanks the scholarships of the Federal Agency for the Support and Improvement of Higher Education (CAPES), contract #99999.002598/2015–09. This paper is part of the dissemination activities of project FunGlass. This project has received funding from the European Union´s Horizon 2020 research and innovation program under grant agreement No 739566., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Novel sol-gel route to prepare Eu3+-doped 80SiO2-20NaGdF4 oxyfluoride glass-ceramic for photonic device applications

  • Cruz, María Eugenia
  • Lam Tran, Thi Ngoc
  • Chiasera, Alessandro
  • Durán, Alicia
  • Fernández, Joaquín
  • Balda, Rolindes
  • Castro Martín, Yolanda
Oxyfluoride glass-ceramics (OxGCs) with the molar composition 80SiO2-20(1.5Eu3+: NaGdF4) were prepared with sol-gel following the “pre-crystallised nanoparticles route” with promising optical results. The preparation of 1.5 mol % Eu3+-doped NaGdF4 nanoparticles, named 1.5Eu3+: NaGdF4, was optimised and characterised using XRD, FTIR and HRTEM. The structural characterisation of 80SiO2-20(1.5Eu3+: NaGdF4) OxGCs prepared from these nanoparticles’ suspension was performed by XRD and FTIR revealing the presence of hexagonal and orthorhombic NaGdF4 crystalline phases. The optical properties of both nanoparticles’ phases and the related OxGCs were studied by measuring the emission and excitation spectra together with the lifetimes of the 5D0 state. The emission spectra obtained by exciting the Eu3+-O2− charge transfer band showed similar features in both cases corresponding the higher emission intensity to the 5D0→7F2 transition that indicates a non-centrosymmetric site for Eu3+ ions. Moreover, time-resolved fluorescence line-narrowed emission spectra were performed at a low temperature in OxGCs to obtain information about the site symmetry of Eu3+ in this matrix. The results show that this processing method is promising for preparing transparent OxGCs coatings for photonic applications., This project received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement no. 739566. The authors acknowledge financial support from MICINN under projects PID2020-115419GB-C21-C22/AEI/10.13039/501100011033 and University of the Basque Country (Project GIU21/006)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optically active nano-glass-ceramic coatings of Nd3+ doped-80SiO2-20LaF3 prepared by the pre-crystallized nanoparticles sol-gel route

  • Cruz, María Eugenia
  • Fernández, Joaquín
  • Durán, Alicia
  • Balda, Rolindes
  • Castro Martín, Yolanda
Transparent oxyfluoride glass-ceramic (OxGCs) coatings with composition 1.2Nd3+ 80SiO2- 20LaF3 were prepared following a sol-gel route labelled “pre-crystallized nanoparticles route”. OxGCs are transparent materials composed by one or more fluoride nanocrystals in a glass matrix. OxGCs have been prepared by sol-gel with encouraging results in powders and bulk glass-ceramics but not in coatings. In the present work, aqueous suspensions of LaF3 nanoparticles doped with Nd3+ were prepared by chemical route and then incorporated into a silica sol to obtain 1.2Nd3+ doped-80SiO2-20LaF3 particulate sols. Nd3+-LaF3 suspensions are characterized by XRD, HRTEM, and XRF revealing the presence of LaF3 as the unique crystalline phase. Then, 1.2Nd3+ -80SiO2-20LaF3 coatings were prepared by dip-coating and characterized by XRD, FTIR, and Ellipsometry. Photoluminescence measurements were performed for LaF3 nanoparticles and OxGCs coatings, confirming the presence of Nd3+ in the nanocrystals and showing well-structured crystalline-like emission spectra with lifetimes of 520 and 440 µs respectively., The authors acknowledge financial support from MICINN under projects PID2020-115419GB-C21- C22/AEI / 10.13039/501100011033 and from the Basque Country University under project GIU21/006. This article is a part of dissemination activities of the project FunGlass, which has received funding from the European Union´s Horizon 2020 research and innovation program under grant agreement No 739566., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spectro-temporal behavior of dye-based solid-state random lasers under a picosecond pumping regime: Part III

  • Iparraguirre, Ignacio
  • García-Revilla, Sara
  • Azkargorta, Jon
  • Fernández, Joaquín
  • Balda, Rolindes
In two recent works, the authors have investigated the spectro-temporal properties of the random laser emission from solid state dye-doped powders in picosecond pumping regime. Each emission pulse consists, both above and below threshold, in a collection of narrow peaks of a spectro-temporal width at the theoretical limit (ΔωΔt≅1). The distribution of path lengths traveled inside the diffusive active medium by photons that can be amplified by stimulated emission explains this behavior, as demonstrated by a simple theoretical model developed by the authors. The aim of the present work is, first, to develop an implemented model that does not depend on fitting parameters, and which is compatible with the energetic and spectro-temporal properties of the material; and second, to get knowledge about the spatial properties of the emission. The transverse coherence size of each emitted photon packet has been measured; and in addition, we have shown the existence of spatial fluctuations of the emission of these materials, as our model predicts., Euskal Herriko Unibertsitatea (GIU/21/006); Ministerio de Economía y Competitividad (PID2020115419GB/C22)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structure and luminescent properties of Sm/Dy-doped Sr2MgSi2O7 glass–ceramics

  • Fernández-Rodríguez, Laura
  • Balda, Rolindes
  • Fernández, Joaquín
  • Durán, Alicia
  • Pascual, M. Jesús
Sm3+-doped and Sm3+/Dy3+ codoped SiO2–SrO–MgO glasses were prepared by conventional melt quenching and Sr2MgSi2O7 based glass–ceramics from sintering and crystallization of the glass powders. The thermal, structural, and optical properties of the glasses and glass–ceramics were investigated as a function of the dopant concentration. The optical characterization includes the photoluminescence spectra and the lifetimes of the 4G5/2 (Sm3+) and 4F9/2 (Dy3+) excited states. In Sm3+ single-doped samples, the emission intensity increases up to a concentration of 0.3 mol% Sm3+ ions and then decreases due to nonradiative energy transfer processes. The emission spectra in the glass–ceramics show a more resolved structure and higher intensity compared to the glass samples, suggesting a different and crystalline environment for the Sm3+ ions. The non-radiative processes also influence the experimental decays of the glass samples which deviate from a single exponential with lifetimes decreasing as Sm3+ concentration increases. The emission and excitation spectra of the codoped samples do not show significant energy transfer between Sm3+ and Dy3+ ions. Different emitting colors can be obtained in the codoped glasses by changing the excitation wavelength. The studied glass–ceramics could be applied as enamels on ceramic or metallic substrates., Funding from MICINN under projects PID2020-115419GB-C-21/C-22/AEI/10.13039/501100011033,PID2019-107439GB-I00 and PIE-CSIC 201960E016 is acknowledged, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A site-selective fluorescence spectroscopy study of the crystal phases of KY3F10: Leveraging the optical response of Eu3+ ions

  • Serna-Gallén, Pablo
  • Beltrán-Mir, Héctor
  • Cordoncillo, Eloísa
  • Balda, Rolindes
  • Fernández, Joaquín
The present work deals with the investigation of the site-selective symmetries in Eu3+-doped KY3F10 with different crystal phases. Employing time-resolved fluorescence line-narrowing (TRFLN), a study of the luminescent response of the dopant is reported in samples presenting a single δ-phase, a single α-phase, and a mixture of both δ and α. A new, simple, very low time-consuming and high-yield method was developed to obtain nanospheres of the δ-phase. For both crystal phases, the main site symmetry is spectrally corroborated with that expected by the crystallographic substitution position (C2v in δ, and C4v in α). In addition, the accuracy of the measurements also unveils the presence of significantly distorted Eu3+ ions in the surface of the nanoparticles in all the samples studied, a spectral behavior commonly found in glassy systems. All these findings contribute to the proper understanding of the optical response of luminescent dopants in this and related types of complex fluorides. It is worth highlighting the fact that the huge potential of the unexplored δ-phase is demonstrated, since the site-selective emission of the Eu3+-doped δ-phase is up to 20 times more intense than that of the α-phase., This work was supported financially by the Spanish MCIN (Grant PID2020-116149GB-I00 and PID2020-115419GB/C-22 funded by MCIN/AEI/10.13039/501100011033) and the University of the Basque Country (GIU21/006). P. Serna also thanks the Spanish MCIN for an FPU predoctoral contract (FPU18/04511 funded by MCIN/AEI /10.13039/501100011033 and by “ESF Investing in your future”)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spark plasma sintering and optical properties of Tm3+ and Tm3+ /Yb3+ doped NaLaF4 transparent glass-ceramics

  • Sedano, Mercedes
  • Babu, Singarapu
  • Balda, Rolindes
  • Fernández, Joaquín
  • Durán, Alicia
  • Pascual, M. Jesús
Tm3+ doped oxyfluoride glass-ceramics (GCs) containing NaLaF4 nanocrystals (NCs) have been obtained by spark plasma sintering (SPS). First, the precursor glasses were melted and then milled and sieved to a suitable particle size. Glass powder pellets were sintered by spark plasma sintering under vacuum conditions. The SPS processing parameters (temperature, pressure, and holding time) were optimized to obtain transparent glass-ceramics. The times of SPS processing are considerably shorter compared with those for the preparation of these GCs by conventional thermal treatment. All glass-ceramics contain nanocrystals of the β- NaLaF4 phase with an average crystal size of 20 nm, but the more highly doped samples (2Tm3+ and 0.5Tm3+/2Yb3+) show evidence of the presence of another phase corresponding with α-NaLaF4. The luminescence properties of the near infrared (NIR) emissions of Tm3+ for different concentrations reveal the presence of concentration quenching of the 3H4 and 3F4 levels. The analysis of the decay from the 3H4 level with increasing concentration is consistent with a dipole-dipole quenching process assisted by energy migration, whereas the self-quenching of the 3F4→3H6 emission can be attributed to fast diffusion. Energy transfer between Yb3+ and Tm3+ ions is confirmed by the NIR and upconverted (UC) emissions after Yb3+ excitation at 975 nm. No UC emission is observed under 791 nm excitation of Tm3+ ions., Funding from MICINN under project PID2020–115419 GB-C-21/C-22/AEI/10.13039/501100011033 is acknowledged. This paper is part of the dissemination activities of project FunGlass. This project has received funding from the European Union´s Horizon 2020 research and innovation program under grant agreement No 739566., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Er/Yb co-doped LiYF4 transparent oxyfluoride glass-ceramics with up-conversion optical properties

  • Truong, N.M.P.
  • Sedano, Mercedes
  • Durán, Alicia
  • Balda, Rolindes
  • Pascual, M. Jesús
  • Klement, R.
Transparent oxyfluoride glass-ceramics doped with rare earth ions (RE3+) are promising materials for photoluminescence up- and down-conversion. In this study, glass compositions within the system 40SiO2–25Al2O3–18Li2O–7LiF–10YF3 (mol.%) doped with ErF3 and codoped with ErF3/YbF3 were prepared by melt-quenching method and subjected to thermal treatment at temperatures above glass transition (Tg + 35 °C) for long dwell times to obtain the corresponding glass-ceramics. The formation of LiYF4 and LiAlSiO4 nanocrystals was confirmed by XRD analysis after thermal treatment at 540 °C for 20 h. The increase in the treatment time up to 80 h resulted in the enhancement of the UC luminescence yield and the decrease of the Red to Green ratio (R/G) emission intensity. Due to the nano-sized crystals, the glass-ceramic products were transparent (%T) in near-infrared (NIR) and visible spectral region with %T remaining approximately 85% and 75%, respectively, after 20 h treatment. However, the visible window transparency reduced, with %T dropping to around 50% after 80 h due to the increase in crystal size and crystalline fraction. The influence of Yb3+ co-doping on the up-conversion (UC) luminescence has been investigated in the glass-ceramics and compared to the parent glasses, confirming that Yb3+ ions were also a key factor for facilitating up-conversion via energy transfer (ET), leading to a greater luminescence yield than for Er3+ single doped glass-ceramics and tuning of R/G intensities., This work was supported by a part of the European Union’s Horizon 2020 research and innovation program [grant number 739566]; the MICINN [grant number PID2020-115419GBC-21/C-22/AEI/10.13039/501100011033]; and the project VEGA 1/0476/22., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Luminescence of Nd3+-doped LaF3 glass-ceramics enhanced with Ag nanoparticles

  • Sedano, Mercedes
  • Gorni, Giulio
  • Mather, Glenn C.
  • Durán, Alicia
  • Fernández, Joaquín
  • Balda, Rolindes
  • Pascual, M. Jesús
Nd3+-doped, LaF3-based, transparent oxyfluoride glass-ceramics (GCs) containing Ag nanoparticles (NPs) have been prepared by a melt-quenching method. Different Ag-containing precursors were employed, with AgNO3 as the most suitable for obtaining Ag NPs segregated in the glassy matrix. Transmission electron microscopy and X-ray absorption spectroscopy determined the presence of Ag0 NPs, with higher concentrations in glass-ceramics produced in an inert atmosphere (N2). The spectral features of emission and excitation spectra, in addition to the different lifetimes of the 4 F3/2 state in the co-doped samples with Ag NPs, demonstrate the incorporation of Nd3+ ions into the LaF3 nanocrystals. The relative contribution to the emission from Nd3+ in the nanocrystals depends on the Ag concentration and atmosphere. The glass-ceramic co-doped with 0.2 wt% Ag, thermally treated in N2, exhibits the highest contribution of emissions attributable to Nd3+ ions in the crystalline phase. The crystalline fraction is similar to that of a Ag-free sample synthesized under analogous conditions. This increase of the luminescence is likely attributable to the enhancement of the local electric field in the LaF3 nanocrystals due to the presence of Ag0 NPs., This work was supported by MICINN [grant number PID2020-115419 GBC21/C22/ AEI/10.13039/501100011033], the University of the Basque Country GIU21/006 and PIBA2023_1_0017 (Basque Country Government). XANES and EXAFS experiments were performed at the BL22-CLAESS beamline at the ALBA synchrotron with the collaboration of ALBA staff under the experiment number AV-2022025686. Giulio Gorni acknowledges Grant FJC2020-044866-I funded by MCIN/AEI/ 10.13039/501100011033 and by the “European Union Next Generation EU/PRTR”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Colour tuning in Eu/Ag- co-doped transparent LaF3 glass-ceramics

  • Sedano, Mercedes
  • Durán, Alicia
  • Mather, Glenn C.
  • Fernández, Joaquín
  • Balda, Rolindes
  • Pascual, M. Jesús
Eu/Ag-co-doped transparent oxyfluoride glass-ceramics based on LaF3 have been obtained by melt-quenching followed by structural analysis employing X-ray diffraction and transmission electron microscopy. Absorption spectra showed only Eu3+ ion transitions, irrespective of the presence of silver or the atmosphere used in the preparation. Excitation spectra obtained by collecting luminescence at 437 nm (Eu2+) and 612 nm (Eu3+) indicated the partial reduction of Eu3+ to Eu2+. As a consequence, by tuning the excitation wavelength, a variety of emission spectra are obtained, highlighting the coexistence of Eu2+ and Eu3+ ions, with the emission dominance of the type of ion dependent on the excitation wavelength. The presence of Ag and the atmosphere used during sample preparation affected the intensity of certain emissions, indicating the presence of oxidation-reduction reactions. Chromaticity diagrams illustrating the changes in colour coordinates corresponding to variations in the excitation wavelength showed a range of colours from red to blue, including purple-blue tones., This work was supported by MICINN [grant number PID2020-115419GBC-21/C-2/AEI/10.13039/501100011033], the University of the Basque Country GIU21/006, and the Basque Country Government PIBA2023_1_006., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of crystal field inhomogeneities on the spontaneous and laser tuning emission of a Nd3+-doped Li2O–BaO–Al2O3–P2O5 glass

  • García-Revilla, Sara
  • Azkargorta, Jon
  • Iparraguirre, Ignacio
  • Muñoz, Francisco
  • Fernández, Joaquín
  • Balda, Rolindes
The present work focuses on the spectroscopic and laser properties of Nd3+ in a Li2O–BaO–Al2O3–P2O5 aluminophosphate glass which includes Judd-Ofelt calculation, stimulated emission cross-section of the 4F3/2 → 4I11/2 emission laser transition, lifetime of the 4F3/2 state and quantum efficiency. Site-selective laser spectroscopy and stimulated emission under selective excitation has been performed to determine the crystal field inhomogeneity at the Nd3+ site together with its broadening effect on the spontaneous and laser emissions. However, a much narrowed laser emission has been achieved by using an intracavity tilting plate which acts as a tunable optical filter to adjust the laser wavelength., This work was supported by MICINN [grant number PID2020-115419GBC-21/C-22/AEI/10.13039/501100011033], the University of the Basque Country GIU21/006, and the Basque Country Government PIBA2023_1_006., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High performance double layer hydrophobic antireflective coatings on glass prepared by sol–gel method

  • Haritha, Ajitha Haridasan
  • Faturíková, K.
  • Durán, Alicia
  • Galusek, Dušan
  • Castro Martín, Yolanda
  • Velázquez, J. J.
A double layer coating was designed and fabricated on glass surfaces by sol-gel method using a silica-titania (SiO2–TiO2) thin film as the bottom layer and an inorganic-organic (triethoxy(octyl)silane (OTES) modified SiO2) upper layer. SiO2 and TiO2 sols were prepared using tetraethyl orthosilicate (TEOS) and titanium isopropoxide (TIP) as precursors and nitric acid (HNO3) as catalyst. The refractive index of the SiO2–TiO2 and OTES modified SiO2 layers were 1.79 and 1.45, and their thicknesses were approximately 76.8 nm and 94.2 nm, respectively. The results show an increase of 7% in transmittance respect to the uncoated glass substrate. At the same time, OTES-modified SiO2 top layer significantly improved the hydrophobicity of the system; the water contact angle of film increased from 56° for system without the OTES modified SiO2 layer to 102° for the system with OTES-modified SiO2 top layer. © 2024 The Authors, This research is a contribution to the FunGlass project, which has been financially supported by the European Union Horizon 2020 Research and Innovation Program under Grant 739566. Additionally, the study received support from the Grant Agency of the Slovak Republic under Grant VEGA 1/0431/18 and VEGA 1/0844/21. The authors acknowledge finantial support from MICINN under projects PID2020-115419GB-C21-C22/AEI/10.13039/501100011033. A. H. Haritha would like to thanks Assoc. Prof. Alfonz Plsko for his constant support and advise. The authors would like to express their gratitude to the JECS Trust for providing funding (contract No. 2022301) ., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of barium substitution on the physical, thermal, optical and luminescence properties of Sm3+-doped metaphosphate glasses for reddish orange light applications

  • Mrabet, H.
  • Khattech, I.
  • Bouzidi, S.
  • Kechiche, L.
  • Jbeli, A.
  • Al Harbi, N.
  • Bouzidi, C.
  • Muñoz, Francisco
  • Balda, Rolindes
Our present study focuses on examining the thermal, structural and luminescent characteristics of sodium barium metaphosphate glasses doped with Sm3+. Glass samples with molar compositions (100 − y)[(50P2O5)-(50-xNa2O)-(xBaO)]-ySm2O3, where x = 20, 25, 30, 35, 40 and y = 0.3 and 1% were first synthesized by conventional melt quenching and later dehydroxylated under a constant N2 flow to ensure final glasses with a very high degree of chemical and optical homogeneity and free of water. Upon the addition of BaO and Sm2O3, refractive index, molar mass, density, glass transition temperature and dilatometric softening temperature exhibited an increase, whereas the coefficient of thermal expansion showed a decrease. The FTIR spectra analysis reveals a network depolymerization that intensifies with rising BaO concentration, ultimately transitioning from a modifier oxide to a glass-forming element, at higher BaO concentrations. All doped samples exhibited prominent absorption bands in the visible (VIS) and near-infrared (NIR) regions, as revealed by the optical absorption spectra. The Na2O modifier demonstrated greater influence on Sm3+ emission compared to BaO, a phenomenon that can explained by the moderation of the local ligand field strength resulting from this substitution. With an increase in Sm2O3 concentration from 0.3 to 1 mol%, the experimental lifetimes of the 4G5/2 level decrease, primarily attributed to the presence of energy transfer mechanisms. A discussion of Judd-Ofelt parameter analysis and glass radiation properties will be presented. © 2024 The Royal Society of Chemistry., The authors thank funding through projects MAT2017-87035-C2-1-P/-2-P from Agencia Estatal de Investigacion, PID2020-115419GB-C21/C22 from Agencia Estatal de Investigacion MCINN/AEI/10.13039/501100011033 and PIBA18-24 (Basque Country Government). The researchers would like to acknowledge Deanship of Scientific Research, Taif University., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Pressure-assisted sintering approaches for up-converting LiYF4:Er/Yb transparent oxyfluoride glass-ceramics

  • Truong, Mai-Phuong
  • Michálková, M.
  • Sedano, Mercedes
  • Pascual, M. Jesús
  • Klement, R.
Glasses of compositions 40SiO2-25Al2O3-18Li2O-7LiF-(10-x-y)YF3-xErF3-yYbF3 (mol.%, x = 0.1, 0.5; y = 0, 0.4, 2, 4) were prepared by melt-quenching technique and milled into powders. Glass powder pellets were treated by hot pressing at defined temperatures to obtain the corresponding glass-ceramics (GCs). High-resolution TEM and XRD analysis revealed the crystallization of LiYF4 and LiAlSiO4 phases with nano-crystal size below 50 nm, resulting in translucent GCs. The density of GCs was 98–99.5 % compared to parent glasses. GCs exhibited intense up-conversion emission when excited by near-infrared light at 980 nm. As Er3+ concentration increased from 0.1 to 0.5 mol.% in the samples, notable enhancement in green and red emission intensities was indicated. Yb3+ ions significantly facilitated up-conversion emission through energy transfer to Er3+ ions, resulting in a higher luminescence yield compared to Er3+ single-doped GCs. The tuning of the red to green emission intensity ratio can be achieved by varying Er3+ and Yb3+ concentrations and Er3+/Yb3+ ratio. © 2024 The Author(s), This project has received fundings from the European Union\u00B4s Horizon 2020 research and innovation programme under grant agreement No 739566, the MICINN grant No PID2020-115419GBC-21/C-22/AEI/10.13039/501100011033. The authors are grateful to the JECS Trust for financing the 3-month visit to ICV-CSIC Madrid (Contract No. 2022330). The authors also gratefully acknowledge the financial support from the Slovak Grant Agency of the Ministry of Education, Science, Research and Sport, VEGA 1/0476/22., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thermodynamic model for the structure of Nd doped phosphate laser glasses and the neodymium chemistry influence on their emission properties

  • López-Grande, Alberto
  • Azkargorta, Jon
  • Iparraguirre, Ignacio
  • Tricot, Gregory
  • García-Revilla, Sara
  • Fernández, Joaquín
  • Balda, Rolindes
  • Muñoz, Francisco
Data will be made available on request., Development of phosphate laser glasses has focused on combining good laser emission with high mechanical performance and their structure has increasingly been of importance due to the usefulness in interpreting the behavior of functional glasses and help in the design of novel compositions. Herein we tackled the interrelationships between the structure, the nearby chemical environment of Nd3+ ions and the spectroscopic and laser emission properties in a series of phosphate and alumino-phosphate Nd-doped glasses. The structure has been obtained using the associated solutions model and has been confirmed by a multinuclear NMR study in the system Na2O-K2O-BaO-Al2O3-P2O5, then correlated with the emission properties of the different glasses. Nd luminescence depends on the coordination around Nd and linear and nonlinear spectroscopic results suggest that high strength modifiers in mixed-alkali compositions increase the crystal field disorder enhancing electric-dipole transitions and promoting the presence of two broad distributions of Nd3+ sites., This work has been funded by MICINN (grant number PID2020-115419GBC-21/C-22/AEI/10.13039/501100011033), the University of the Basque Country with GIU21/006 grant and the Basque Country Government through project PIBA2023_1_006. GT would like to thank Region Nord Pas de Calais, Europe (FEDER), CNRS, University of Lille for funding of the NMR spectrometer., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Er3+–Yb3+-codoped LaF3 glass–ceramic optical fiber

  • Sedano, Mercedes
  • Kochanowicz, Marcin
  • Dorosz, Dominik
  • Fernández, Joaquín
  • Balda, Rolindes
  • Pascual, M. Jesús
This paper reports the preparation and characterization of LaF3-based glass–ceramic (GC) optical fibers codoped with Er3+ and Yb3+ ions, using the rod-in-tube method with Duran glass as cladding. Structural analysis, including x-ray diffraction and transmission electron microscopy, confirmed the presence of LaF3 nanocrystals in the core, with sizes ranging from 8 to 10 nm, slightly smaller than those observed in bulk samples due to the higher cooling rate during fiber drawing. Optical measurements showed transmission losses of 13 dB/m for the GC fibers after heat treatment at 660°C for 40 h. Upconversion (UC) emissions were observed in the green (2H11/2, 4S3/2 → 4I15/2), red (4F9/2 → 4I15/2), and blue (2H9/2 → 4I15/2) regions upon excitation at 980 nm. The dependence of UC emission on pump power showed a near linear dependence, which can be explained by saturation effects in the intermediate energy states and indicates that the UC process is driven by energy transfer from Yb3+ to Er3+ ions. These results demonstrate the potential of these fibers for advanced optical applications, including telecommunication, sensors and laser technologies., This work was supported by MICINN [grant number PID2020-115419GBC-21/C-22/AEI/10.13039/501100011033], the University of the Basque Country GIU21/006, and the Basque Country Government PIBA2023_1_006., Peer reviewed