- Porcar, Samuel
- Schmickler, Marcel
- Okcu, Hayri
- Obenlüneschloß, Jorit
- D'Ercole, Stefano
- Cervera Gabalda, Laura
- Galarreta-Rodriguez, Itziar
- Rubio-Zuazo, Juan
- González Cuadra, Jaime
- Lahlahi, Abderahim
- Fraga, Diego
- Sanchez-Velasquez, Camilo
- Bellet, Daniel
- Fix, Thomas
- Carda, Juan B.
- Devi, Anjana
- Muñoz-Rojas, David
Spatial atomic layer deposition (SALD) is a recent ALD variant enabling much faster deposition rates, even at atmospheric pressure, making it ideal for scalable, low-cost devices. NiOx, a transparent p-type oxide, is widely used in emerging technologies like perovskite solar cells. However, no suitable SALD process for NiO thin films has been reported so far. In this work, we present the deposition of nanocrystalline NiOx thin films via SALD using a recent Ni precursor not yet explored for the ALD of NiO, namely, bis(4-(isopropylamino)pent-3en-2-onato)nickel(II) or [Ni(ipki)2]. O2 has been used as coreactant, with higher deposition rates being achieved if H2O is added to the O2 flow. A narrow ALD window has been obtained between 230 °C and 250 °C, where a GPC of 0.023 nm is observed. This corresponds to a deposition rate of 1.4 nm/min, which is 2 to 10 times faster than the rates reported for conventional ALD of NiO thin films. Remarkably, the growth onset of NiOx starts around only 170 °C. The transmittance of the films reaches nearly 97 % in the visible for 55 nm thick films. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) studies revealed a high homogeneity of the films. X-ray diffraction (XRD), Raman spectroscopy and X-ray absorption spectroscopy (XAS) studies confirm the presence of a cubic NiOx crystalline phase. Finally, NiOx films have been deposited on Ag nanowire networks, demonstrating the possibility of depositing homogeneous and conformal coatings with this new process., The authors would like to express their gratitude for the financial support provided by several research initiatives: the FOTOCER project (PID2020–116149GB-I00), funded by MCIN/AEI/10.13039/501100011033; the CLUSCERM project (TED2021–130963B-C22), supported by MCIN/AEI/10.13039/501100011033 and the European Union’s NextGenerationEU/PRTR initiative; and the CLUSKER project (INNEST/2024/420), funded by the Valencian Institute of Business Competitiveness (IVACE). Additional support was received from the, jointly funded by ANR (project number 21-CE08–0047) and DFG (project number 490773082). The work has also benefited from funding under the Investissement d’Avenir (PIA) program – LabEx MINOS. Furthermore, the authors acknowledge support through the postdoctoral fellowship CIAPOS/2023/425 and the predoctoral fellowship CIACIF/2022/277, both co-financed by the Valencian regional government and the European Social Fund. Authors also want to thank the “Cátedra de Innovación Cerámica 'Ciutat de Vila-real' de l’Universitat Jaume I” for the financial support. We also acknowledge the Spanish Ministerio de Ciencia, Innovación y Universidades and Consejo Superior de Investigaciones Científicas for financial support and for provision of synchrotron radiation facilities through the projects 2010 6 0E 013, 2021 60 E 030 and CEX2024-001445-S., With funding form the Spanish government through the "Severa Ochoa Centre of Excellence" accreditation (CEX2024-001445-S)., Peer reviewed