Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Design and Realization of a Band Pass Filter at D-band Using Gap Waveguide Technology

  • Vázquez Roy, José Luis
  • Rajo Iglesias, Eva
  • Ulisse, Giacomo
  • Krozer, Viktor
Gap waveguide technology is particularly attractive for the design of passive elements in mm-wave systems. Recently, the so-called zero-gap implementation has proved to be very robust to manufacturing tolerances, while at the same time keeping the low loss associated to the contactless standard gap waveguide. In this paper, a Chebyshev filter working at 145 GHz based on this idea and intended to be used in a wireless communication system is designed and optimized. A conventional milling technique has been used in its fabrication, and good measured results have been obtained in a single-pass process., This work has been partly funded by EU Commission within the H2020 Ultrawave project, Spanish Government under project TEC-2016-79700-C2-2-R, and by Chairs of Excellence project appointment at the Universidad Carlos III de Madrid, Madrid, Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Transparent multichannel wireless bridge for optical fiber links based on a two-stage upconversion

  • Zoireff, Gustavo
  • Costanzo Caso, Pablo A.
  • Bulus Rossini, Laureano
  • Vidal, Borja|||0000-0002-0942-3259
[EN] A bridge architecture enabling seamless wireless interconnection within an optical fiber link is studied. Optical baseband data is remodulated by local oscillators using two stages to allow efficient and costeffective upconversion. Proof-of-concept experiments show the feasibility of the approach. Direct operation with standard optical signals and ease of integration in the conventional optical fiber infrastructure define the transparency property of this subsystem, which represents a potential solution to restore data traffic in scenarios where fiber deployment is uneconomical or a disaster has taken place., This work was supported in part by the European Union's Horizon 2020 research and innovation program (ULTRAWAVE-project, no. 762119).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Remote Photonic THz Generation Using an Optical Frequency Comb and Multicore Fiber

  • Morant, Maria
  • González-Guerrero, Luis
  • Renaud, Cyril C.
  • Llorente, Roberto
[EN] This paper proposes and demonstrates a photonic THz generation technique based on an optical frequency comb and multicore fiber (MCF) transmission, with the advantage of remote generation with great reconfigurability and reduced digital signal processing (DSP). The feasibility of the proposed technique is evaluated experimentally comparing the performance when transmitting a data wavelength and a local oscillator for optical heterodyning over a single core or over different cores in a 1-km MCF link. The proposed remote photonic THz generation technique is demonstrated employing a 16QAM 12.5 GBd signal. A short wireless transmission at 183 GHz center frequency with 0.25 m antenna-separation is achieved after 1 km MCF, meeting the soft-decision decision forward error correction (SD-FEC) bit error rate (BER) recommendation of 2 center dot 10(-2). The analysis includes the received photocurrent range for which the BER meets the standard hard-decision forward error correction (HD-FEC) recommendation of 3.8 center dot 10(-3) BER. The BER performance is analyzed considering different DSP configurations, with and without frequency offset estimation (FOE) and decision-driven least mean squares (DD LMS) equalization. The performance of the remote photonic THz generation technique is evaluated comparatively against traditional free-running laser transmission over MCF, confirming the advantage of using comb generation to reduce the frequency offset fluctuation and simplify the DSP., This work was supported by Spanish State Research Agency under Grants PID2019-106163RJ-I00/AEI/10.13039/501100011033 MULTICORE+ and MINECO/FEDER UE RTI2018-101296-B-I00 MULTI-BEAM5G projects, in part by the European Union'sHorizon 2020 Research and Innovation Programme underGrant H2020-EU.2.1.1.-762119 ULTRAWAVE, and in part by the Engineering and Physical Sciences Research Council under Grant EPSRC EP/P003990/1 COALESCE. The work of Maria Morant supported by Generalitat Valenciana under Grant BEST/2019/047.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Broadband photonic microwave noise sources

  • Vidal, Borja|||0000-0002-0942-3259
[EN] The generation of wideband microwave white noise based on optical technology is investigated. It is shown that strong broadband noise in the microwave band can be generated using amplified spontaneous noise (ASE). Measurements show wideband operation (0-20 GHz) and very large tunable excess noise ratio (ENR) up to 62 dB. Photonics offer an alternative implementation of noise sources for system characterization over very broad bandwidths and potential to be employed in the millimeter and submillimeter-wave bands where conventional noise sources are complex or inexistent, This work was supported in part by the European Union's Horizon 2020 Research and Innovation Programme (ULTRAWAVE-Project), under Grant 762119.