Pasar al contenido principal

FIBRA OPTICA MULTI-NUCLEO PARA COMUNICACION DE CELDAS 5G-NR Y B5G EN ONDAS MILIMETRICAS

PID2019-106163RJ-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Remote Photonic THz Generation Using an Optical Frequency Comb and Multicore Fiber

  • Morant, Maria
  • González-Guerrero, Luis
  • Renaud, Cyril C.
  • Llorente, Roberto
[EN] This paper proposes and demonstrates a photonic THz generation technique based on an optical frequency comb and multicore fiber (MCF) transmission, with the advantage of remote generation with great reconfigurability and reduced digital signal processing (DSP). The feasibility of the proposed technique is evaluated experimentally comparing the performance when transmitting a data wavelength and a local oscillator for optical heterodyning over a single core or over different cores in a 1-km MCF link. The proposed remote photonic THz generation technique is demonstrated employing a 16QAM 12.5 GBd signal. A short wireless transmission at 183 GHz center frequency with 0.25 m antenna-separation is achieved after 1 km MCF, meeting the soft-decision decision forward error correction (SD-FEC) bit error rate (BER) recommendation of 2 center dot 10(-2). The analysis includes the received photocurrent range for which the BER meets the standard hard-decision forward error correction (HD-FEC) recommendation of 3.8 center dot 10(-3) BER. The BER performance is analyzed considering different DSP configurations, with and without frequency offset estimation (FOE) and decision-driven least mean squares (DD LMS) equalization. The performance of the remote photonic THz generation technique is evaluated comparatively against traditional free-running laser transmission over MCF, confirming the advantage of using comb generation to reduce the frequency offset fluctuation and simplify the DSP., This work was supported by Spanish State Research Agency under Grants PID2019-106163RJ-I00/AEI/10.13039/501100011033 MULTICORE+ and MINECO/FEDER UE RTI2018-101296-B-I00 MULTI-BEAM5G projects, in part by the European Union'sHorizon 2020 Research and Innovation Programme underGrant H2020-EU.2.1.1.-762119 ULTRAWAVE, and in part by the Engineering and Physical Sciences Research Council under Grant EPSRC EP/P003990/1 COALESCE. The work of Maria Morant supported by Generalitat Valenciana under Grant BEST/2019/047.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Integrated wireless-optical backhaul and fronthaul provision through multicore fiber

  • Gonzalez Guerrero, Luis
  • Li, Tongyun
  • Fice, Martyn J.
  • Seeds, Alwyn J.
  • White, Ian H.
  • Penty, Richard V.
  • Renaud, Cyril C.
  • Maria Morant|||0000-0001-5565-7788
  • Roberto Llorente|||0000-0003-4799-2564
[EN] In this paper we propose multicore fiber (MCF) as the medium to transport the different signals associated with various wireless applications (ranging from access to fronthauling and backhauling) from the baseband unit (BBU) to the cell-site. Using 1 km of a 7-core MCF, we simultaneously transmit fronthaul and backhaul signals from the BBU to the cell site, where they are converted to carrier frequencies in the mm-wave and sub-THz band, respectively. The backhaul is evaluated with a 12.5 GBd 16-quadrature amplitude modulation (QAM) signal, whereas the fronthaul is evaluated with a 7 Gbit/s on-off keying (OOK) signal carrying 14 LTE-compatible channels. The fronthaul signal is generated with a novel compression technique that achieves an efficiency 3-times higher than the one obtained with the common public radio interface (CPRI) protocol. Optical heterodyining is implemented at the cell site for optical-to-RF conversion. The local oscillator (LO) signal required for optical heterodyning is transmitted in a dedicated core, reducing the system complexity and enabling its straight-forward reuse for uplink (UL) transmission. The experimental demonstration includes the simultaneous full-duplex transmission of both the fronthaul and backhaul signals, using 6 cores of the MCF at the same time and achieving a gross data rate of 57 Gbit/s., This work was supported in part by the European Union Horizon 2020 Research and Innovation Program Terahertz Based Ultra High Bandwidth Wireless Access Networks (TERAPOD) under Grant 761579, in part by the Engineering and Physical Sciences Research Council through the Converged Optical and Wireless Access Networks (COALESCE) under Grant EP/P003990/1, and in part by the Spain I CD CI projects under Grant PID2019-106163RJ-I00/AEI/10.13039/501100011033 MULTICORE C and Grant MINECO/FEDER UE RTI2018-101296-B-I00 MULTI-BEAM5G. The work of Maria Morant was supported by the Generalitat Valenciana under Grant BEST/2019/047.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Photonic Frequency Conversion of OFDM Microwave Signals in a Wavelength-Scale Optomechanical Cavity

  • Mercadé, Laura|||0000-0002-4994-7727
  • Maria Morant|||0000-0001-5565-7788
  • Griol Barres, Amadeu
  • Roberto Llorente|||0000-0003-4799-2564
  • Martínez, Alejandro|||0000-0001-5448-0140
[EN] Optomechanical (OM) cavities enable coupling of near-infrared light and GHz-frequency acoustic waves in wavelength-scale volumes. When driven in the phonon lasing regime, an OM cavity can perform simultaneously as a nonlinear mixer and a local oscillator¿at integer multiples of the mechanical resonance frequency¿in the optical domain. In this work, this property is used to demonstrate all-optical frequency down- and up-conversion of MHz-bandwidth orthogonal frequency division multiplexed signals compliant with the IEEE 802.16e WiMAX wireless standard at microwave frequencies. To this end, a silicon OM crystal cavity (OMCC), supporting a breathing-like mechanical resonance at fm ¿3.9 GHz and having a foot-print ¿ 10 um^2, which yields frequency conversion efficiencies better than ¿17 dB in both down- and up-conversion processes at mW-scale driving power, is employed. This work paves the way toward the application of OMCCs in low-power all-photonic processing of digitally modulated microwave signals in miniaturized silicon photonics chips., The authors acknowledge funding from the H2020 Future and Emerging Technologies program (projects PHENOMEN 713450 and SIOMO 945915); the Spanish State Research Agency (PGC2018-094490-BC21, PID2019-106163RJ-I00/AEI/10.13039/501100011033 MULTICORE+ and MCIU/AEI/FEDER UE RTI2018-101296-B-I00 MULTI-BEAM5G); Generalitat Valenciana (PPC/2021/042, BEST/2020/178, PROMETEO/2019/123 and IDIFEDER/2018/033); and the UPV Programa de Ayudas de Investigacion y Desarrollo (PAID-01-16).