Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Improving the Oxidative Stability of Sunflower Oil through Supercritical Impregnation-Assisted PLA/Cinnamaldehyde Active Packaging

  • Villegas, Carolina
  • Talón, Emma
  • Torres, Alejandra
  • Romero, Julio
  • Galotto, María José
  • Guarda, Abel
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] In the present study, the supercritical impregnation process using carbon dioxide (scCO2) was applied to incorporate the active compound cinnamaldehyde into PLA films, aiming to develop an innovative active food packaging solution. This approach leverages the unique properties of scCO2 to achieve efficient incorporation of bioactive compounds. Impregnation tests were performed at a pressure of 12 MPa, a constant temperature of 40 degrees C, and a controlled depressurization rate of 1 MPa min-1, ensuring optimal conditions for the process. The impact of the active compound incorporation via this cutting-edge technique on the oxygen and water vapor barrier properties of the films was thoroughly evaluated, revealing critical insights into material performance. In addition, the release kinetics of cinnamaldehyde in different food simulants were analyzed, and the partition (K PLA/SS) and diffusion (D Ci) coefficients were determined, providing a deeper understanding of compound migration behavior. The oxidative stability of sunflower oil under accelerated storage conditions was also assessed, demonstrating the efficacy of the impregnated films in preserving oil quality. Key findings include the observation that the impregnation process and the incorporation of cinnamaldehyde induced a notable decrease in barrier properties, attributed to the plasticizing effects of the active compound and scCO2. Furthermore, the highest release of cinnamaldehyde was observed in simulants with higher ethanol concentrations, emphasizing the interaction between the active films and food matrices. Finally, the impregnated films significantly enhanced the oxidative stability of sunflower oil, as evidenced by lower peroxide index values, conjugated dienes, and trienes compared to control samples. These results underscore the potential of supercritical impregnation as a sustainable and efficient technology for developing advanced active food packaging materials, offering improved functionality and extended shelf life for food products., This work has been developed in the framework of the project POSTDOC_DICYT 082371GM of the Universidad de Santiago de Chile and the Vicerrectoria de Investigacion, Desarrollo e Innovacion and also, the Center for the Development of Nanoscience and Nanotechnology (CEDENNA) (grant number AFB220001).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Foaming of 3D-Printed PLA/CaCO3 Composites by Supercritical CO2 Process for Sustainable Food Contact Materials

  • Faba, Simón
  • Agüero, Ángel
  • Arrieta, Marina P.
  • Martínez, Sara
  • Romero, Julio
  • Torres, Alejandra
  • Galotto, María José
[EN] In the last decade, among the emerging technologies in the area of bioplastics, additive manufacturing (AM), commonly referred to as 3D printing, stands out. This technology has gained great interest in the development of new products, mainly due to its capability to easily produce customized and low-cost plastic products. This work aims to evaluate the effect of supercritical foaming of 3D-printed parts based on a commercial PLA matrix loaded with calcium carbonate, for single-use sustainable food contact materials. 3D-printed PLA/CaCO3 parts were obtained by 3D printing with a 20% and 80% infill, and two infill patterns, rectilinear and triangular, were set for each of the infill percentages selected. Supercritical fluid foaming of PLA/CaCO3 composite printed parts was performed using a pressure of 25 MPa, a temperature of 130 degrees C for 23 min, with a fast depressurization rate (1 s). Closed-cell foams were achieved and the presence of CaCO3 did not influence the surface of the foams or the cell walls, and no agglomerations were observed. Foam samples with 80% infill showed subtle temperature fluctuations, and thermogravimetric analysis showed that samples were thermally stable up to similar to 300 degrees C, while the maximum degradation temperature was around 365 degrees C. Finally, tensile test analysis showed that for lower infill contents, the foams showed lower mechanical performance, while the 80% infill and triangular pattern produced foams with good mechanical performance. These results emphasize the interest in using the supercritical CO2 process to easily produce foams from 3D-printed parts. These materials represent a sustainable alternative for replacing non-biodegradable materials such as Expanded Polystyrene, and they are a promising option for use in many industrial applications, such as contact materials., Simón Faba gratefully acknowledges the National Commission for Scientific and Technological Research, ANID, for its financial support from the Postdoctoral Scholarship abroad (grant number 74230053). Authors thank the financial support of CEDENNA (AFB 220001 Project) and the Spanish Ministry of Science and Innovation (MICINN) through the PID-AEI project (grant PID2021-123753NA-C32) funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe by the European Union as well as the TED-AEI project (grant TED-129920A-C43) and Research consolidation project (grant CNS2022-136064) funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR . Ángel Agüero acknowledges the Margarita Salas post-doctoral grant from the Ministerio de Universidades, Spain, funded by the Recovery, Transformation, and Resilience Plan financed by the European Union NextGenerationEU. The co-financing of the project FONDECYT-ANID (grant number 1230795) is also acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Biodegradable nanocomposite poly(lacticacid) foams containing carvacrol-based cocrystal prepared by supercritical CO2 processing for controlled release in active food packaging

  • Faba, Simón
  • Arrieta, Marina P.
  • Romero, Julio
  • Agüero, Ángel
  • Torres, Alejandra
  • Martínez, Sara
  • Galotto, María José
  • E. Rayón|||0000-0002-0653-2046
[EN] Compounds derived from essential oils have been used in active packaging, but their volatility and degradability negatively affect stability and leads to high release rates. The present study aimed to develop PLA bionanocomposite foams loaded with carvacrol cocrystal by supercritical CO2 and its release into a food simulant for control release in food packaging. For this purpose, 4,4'-bipyridine was used as coformer and carvacrol as active agent. Cocrystallized closed cell foams were obtained using supercritical CO2 and were characterized in terms of their physicochemical and mechanical properties, and release kinetics to a D1 simulant were evaluated as well as the antioxidant ability. A better overall mechanical behavior due to the nanoclay promoting a higher interfacial adhesion with the polymeric matrix was revealed. A higher incorporation of carvacrol was observed in samples with higher C30B content. The incorporated cocrystals showed a decrease of one order of magnitude in the estimated effective diffusion coefficient of carvacrol and showed antioxidant activity. These results suggest that the nanocomposite foam containing carvacrolbased cocrystals could be used in active packaging systems with controlled release characteristics, especially with highly volatile compounds, and can be proposed for other fields such as biomedical applications., This work has been developed in the framework of the project FONDECYT (grant number 12011301), Ph.D. Simon Faba is gratefully acknowledged to the National Commission for Scientific and Technological Research, ANID, for its financial support from the National Doctoral Scholarship (grant number 21200851) . Authors thank the financial support of CEDENNA (AFB 220001 Project) and the Spanish Ministry of Science and Innovation (MICINN) through the PID-AEI project (grant PID2021-123753NA-C32) funded by MCIN/AEI/10.13039/501100011033 and by ERDF "A way of making Europe" by the "European Union". Moreover, authors thank the staff of the Laboratory of Membrane Separation Processes (LabProSeM) , USACH, Santiago (Chile) for their assistance with equipment and CO2 supercritical system. Ph.D. Angel Agueero acknowledges the Margarita Salas post-doctoral grant from the Ministerio de Universidades, Spain, funded by the European Union-Next Generation EU. Marina P. Arrieta thanks "Consolidacion Investigadora" project (grant CNS2022-136064) funded by MCIN/AEI/10.13039/501100011033 and by the "European Union NextGenerationEU/PRTR".