Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

One-pot laccase@MOF biocatalysts efficiently remove bisphenol A from water

  • Molina Esquinas, Asunción
  • Díez-Jaén, Jorge
  • Sánchez Sánchez, Manuel
  • Blanco Martín, Rosa María
[EN] The presence of bisphenol A (BPA) in wastewater, its toxicity and the hardness for its complete degradation constitutes a serious environmental problem and a scientific challenge. The enzyme laccase is an oxidoreductase capable of oxidizing phenolic compounds, being one of the most efficient biocatalysts for BPA removal. The immobilization of laccases to lead solid biocatalysts is essential for their applications as it allows their stabilization and easy recovery from the liquid reaction media and subsequent reuse. This work compares the efficiency of siliceous-type supports, which have traditionally been used for this purpose, with the use of MOF-type supports. Thanks to the versatility in the synthesis methods offered by MOFs, MOF-type biocatalysts can be prepared in a one-pot using an in-situ procedure (Lac@NH-MIL-53(Al)) under conditions compatible with enzymatic activity (room temperature, aqueous solution and moderate pH values). The resulting biocatalyst displays a high enzyme loading of 100 mg.g which is also permanent: free of enzyme leaching. As opposed, post-synthesis in two steps: Lac#NH-MIL-53(Al) (with low enzyme loading) and Lac#Amorphous silica-NH (100 mg.g enzyme loading, but high rate of enzyme leaching) were also prepared and compared. In contrast to the elimination of 90% of BPA in 60 min obtained with Lac#Amorphous silica-NH, the one-pot immobilization of laccase on MOFs resulted much more efficient. The own enzyme-free MOF-type support (NH-MIL-53(Al)) removed more than 90% of BPA from aqueous solution in 30 min, but such performance was widely surpassed by the biocatalyst Lac@NH-MIL-53(Al) (100% in just 3 min). The significant improvement of BPA degradation was attributed to the mutual and simultaneous contribution of both support and enzyme. In addition, the biocatalyst Lac@NH-MIL-53(Al) was able to remove BPA in five successive cycles with efficiency higher than 85% at the end of the last batch., This work has been financed by CSIC: Consejo Superior de Investigaciones Científicas, Spain (2019AEP076, COOPB20377 and COOPA20271). M.A.M. acknowledges Spanish MINECO for PhD student contract BES-2017–082077 and UAM: Universidad Autónoma de Madrid, for PhD Program in Applied Chemistry. The authors acknowledge the CYTED-LIDA network and the SAB group of ITESM
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sustainable one-pot immobilization of enzymes in/on metal-organic framework materials

  • Molina Esquinas, Asunción
  • Gascón Pérez, Victoria
  • Sánchez Sánchez, Manuel
  • Blanco Martín, Rosa María
The industrial use of enzymes generally necessitates their immobilization onto solid supports. The well-known high affinity of enzymes for metal-organic framework (MOF) materials, together with the great versatility of MOFs in terms of structure, composition, functionalization and synthetic approaches, has led the scientific community to develop very different strategies for the immobilization of enzymes in/on MOFs. This review focuses on one of these strategies, namely, the one-pot enzyme immobilization within sustainable MOFs, which is particularly enticing as the resultant biocomposite Enzyme@MOFs have the potential to be: (i) prepared in situ, that is, in just one step; (ii) may be synthesized under sustainable conditions: with water as the sole solvent at room temperature with moderate pHs, etc.; (iii) are able to retain high enzyme loading; (iv) have negligible protein leaching; and (v) give enzymatic activities approaching that given by the corresponding free enzymes. Moreover, this methodology seems to be near-universal, as success has been achieved with different MOFs, with different enzymes and for different applications. So far, the metal ions forming the MOF materials have been chosen according to their low price, low toxicity and, of course, their possibility for generating MOFs at room temperature in water, in order to close the cycle of economic, environmental and energy sustainability in the synthesis, application and disposal life cycle. © 2021 by the authors. Licensee MDPI, Basel, Switzerland., This research was funded by CSIC (2019AEP076). M.A.M. acknowledges Spanish MINECO for PhD student contract BES-2017-082077. English-writing style. The Government of Ireland Postdoctoral Fellowship-2015 GOIPD/2015/287 is gratefully acknowledged by V.G.-P., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Batch and continuous flow elimination of BPA with one-pot synthetized laccase@NH2-MIL-53(Al)

  • Molina, M. Asunción
  • Blanco Martín, Rosa María
  • Sánchez Sánchez, Manuel
  • Meneses-Jácome, A.
Despite recent restrictions on its use, bisphenol A (BPA) continues to be present in wastewater, posing significant health risks that require effective removal methods. Several strategies have been proposed to address this issue, with batch reactors being the most widely used approach. However, scaling up removal systems to continuous flow conditions is essential for practical application in real-world wastewater treatment. This study presents a BPA removal system utilizing a packed bed reactor (PBR) with supported enzymatic catalyst. In previous research, we demonstrated that the laccase@NH2-MIL-53(Al) catalyst was highly effective in degrading BPA in a batch reactor, thanks to its high enzyme loading and minimal enzyme leaching. The system achieved over 80 % removal efficiency along five reaction cycles, operating faster than free enzyme systems. In this work, we extend the application of this catalyst to continuous flow conditions in a PBR, achieving superior removal efficiencies compared to batch processes. Under continuous flow, the biocatalyst maintained over 90 % BPA removal for extended periods, even at higher contaminant concentrations than typical in environment. The system exhibited remarkable stability with no diffusional limitations, suggesting high substrate accessibility to the enzyme. Additionally, chemical oxygen demand (COD) analyses of treated samples showed minimal increases, reinforcing the environmental compatibility and efficiency of the system. These findings highlight the potential of MOF-supported laccase for industrial applications in wastewater treatment, offering a scalable and sustainable solution for BPA degradation., This work has been financed by CSIC (2019AEP076 and COOPB22002). M.A.M. acknowledges Spanish MINECO for Ph.D. student contract BES-2017-082077 and UAM for Ph.D. Program in Applied Chemistry. A.M. acknowledges support from COOPB20377 for his stay at the ICP-CSIC. The authors acknowledge the CYTED-LIDA network and the SAB group of ITESM. The authors acknowledge the projects TED2021-131143B-I00 and PID2022-136321OB-C21, funded by MCIN/AEI/10.13039/501100011033 and European Union “NextGenerationEU”/PRTR, and MCIN/AEI/10.13039/501100011033 and FEDER, respectively., Peer reviewed