Pasar al contenido principal

HORMIGON DE FIBRAS: UNA SOLUCION PARA CADA NECESIDAD

BIA2012-35776

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2012
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Secretaría de Estado de Investigación, Desarrollo e Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

An inverse analysis method based on deflection to curvature transformation to determine the tensile properties of UHPFRC

  • López Martínez, Juan Ángel
  • Camacho Torregrosa, Esteban Efraím
  • Serna Ros, Pedro|||0000-0001-8754-1165
  • Navarro-Gregori, Juan|||0000-0002-6319-7029
[EN] The determination of the tensile properties of such a deflection hardening response material as UHPFRC is a serious challenge for both researchers and designers. This process involves many factors, such as specimen size, fibre orientation or test typology. The socalled inverse analysis is used to obtain the tensile constitutive properties that are consistent with the specimen response in a bending test. This work focuses on the inverse analysis process. The main aim is to develop a new back-calculation methodology, which is easy to implement, reliable, quick and is consistentwith the measurements taken from a four-point bending test. The new methodology proposed has been validated using an analytical formulation and the experimental results of others authors. This paper also includes an application example of how this methodology works., This work forms part of the ‘‘FIBAC’’ and ‘‘FISNE’’ research projects, with reference BIA2009-12722 and BIA2012-35776, respectively, supported by the Spanish Ministry of Economy and Competiveness and the FEDER fund. Support for this project is gratefully acknowledged. We also wish to thank the Universitat Polite`cnica de Vale`ncia for its Excellence Scholarship (PAID-09-11), the Spanish Ministry of Education, Culture and Sport for its FPU scholarship programme, and also Mr. Toshiyuki Kanakubo for his friendly treatment and help.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

First Ultra-High-Performance Fibre- Reinforced Concrete Footbridge in Spain: Design and Construction

  • López Martínez, Juan Ángel
  • Camacho Torregrosa, Esteban Efraím
  • Serna Ros, Pedro|||0000-0001-8754-1165
  • Coll Carrillo, Hugo
  • Navarro-Gregori, Juan|||0000-0002-6319-7029
[EN] Ultra-high-performance fibre-reinforced concrete (UHPFRC) is defined as a cement-based composite material that combines three technical advances in concrete: high compressive strength, presence of steel fibres and flowability. Since UHPFRC is a very expensive material, in order that UHPFRC can be considered as a competitive alternative in structural applications, it is necessary to optimise the design of structural systems. This process leads to UHPFRC lightweight structures that minimise the concrete needs and give solutions more similar to steel than concrete. The innovative design of the 43,5 m span footbridge, constructed only with UHPFRC and placed over the Ovejas ravine in Alicante, Spain, is presented in this paper. The new UHPFRC footbridge has replaced the former design devised in steel due to many factors such as lower construction and maintenance costs, high durability in aggressive environment close to the sea leading to an increase in service life and its aesthetic enhancement. This paper covers several issues about the design and construction of this singular footbridge, such as design justification, structural evaluation, UHPFRC mix design, quality control and construction process at all stages. The static and dynamic load tests performed are also presented. The footbridge over the Ovejas ravine has become the first structure constructed with UHPFRC in Spain, and as far as we know, it is the first truss pedestrian footbridge made only of UHPFRC in the world., This work has been developed under both "FIBAC" and "FISNE" research projects, with references BIA2009-12722 and BIA2012-35776, supported by the Spanish Ministry of Science and Innovation. Support for this project is gratefully acknowledged. The authors also wish to thank Generalitat Valenciana and the Spanish Ministry of Education, Culture and Sport for its FPU scholarship program.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Creep and residual properties of cracked macro-synthetic fibre reinforced concretes

  • Serna Ros, Pedro|||0000-0001-8754-1165
  • Martí Vargas, José Rocío|||0000-0003-1665-2348
  • Bossio, María E.
  • Zerbino, Raúl
[EN] This study analysed the creep behaviour of five concretes incorporating 0.5% by volume of four macro-synthetic fibres (MSFs) and one steel fibre. After 28 d moist curing, prisms were pre-loaded up to a crack opening of 0.5 mm and held for 90 d in three different environments - ambient laboratory air, seawater at 45 degrees C and air flow at 45 degrees C. Sustained loads were then applied on three specimens from each group while the other prisms remained unloaded. The remaining residual capacity was evaluated by bending tests. It was concluded that the residual capacity of cracked MSF concretes is not affected by long-term loading., The authors wish to thank the technicians of ICITECH, where the experimental work was developed. The financial support of the project FISNE with reference BIA2012-35776, supported by the Spanish Ministry of Economy and Competiveness and the FEDER fund, is also gratefully acknowledged. The doctoral scholarship of M. E. Bossio was supported by the project EuroTANGO (European Commission - EACEA).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Modified push-off test for analysing the shear behaviour of concrete cracks

  • Echegaray-Oviedo, Javier Andres
  • Cuenca Asensio, Estefanía
  • Navarro-Gregori, Juan|||0000-0002-6319-7029
  • Serna Ros, Pedro|||0000-0001-8754-1165
[EN] A detailed methodology to perform the so-called push-off test in precracked concrete specimens is presented. The test is performed with the specimen confined in 2 stages (precracking and push-off) to control crack width. Confinement is provided by a steel restraint frame, which includes a ball bearing to avoid shearing forces from being transmitted outside the shear plane. The real kinematic behaviour of a single-open crack can be assessed. This makes the experimental validation of crack dilatancy models possible. Therefore, the intention of this methodology is to take knowledge about direct shear behaviour on concrete cracks one step forward., Spanish Ministry of Economy and Competitiveness; European Regional Development Fund, Grant/Award Number: BIA2012-35776 (FISNE)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Comportamiento diferido en estado fisurado de elementos de UHPFRC a flexotracción

  • Llano-Torre, Aitor
  • López, Juan
  • Martí Vargas, José Rocío|||0000-0003-1665-2348
  • Serna Ros, Pedro|||0000-0001-8754-1165
[ES] En este trabajo se analiza el comportamiento a largo plazo de elementos de Hormigón de Ultra Alta Resistencia Reforzados con Fibras (en inglés UHPFRC) mediante una campaña experimental con tres tipos de probetas: cilíndricas (Ø100x200mm), prismáticas “R” (150x150x600mm) y prismáticas “S” (150x40x600mm). Se realizaron ensayos de retracción y de fluencia a flexión en estado fisurado, así como de caracterización tanto a resistencia a compresión como flexotracción. Las probetas cilíndricas se destinaron a retracción, fluencia en compresión y resistencia a compresión simple, en tanto que las prismáticas se destinaron a fluencia en flexión y resistencia a flexotracción. En las probetas R se realizó una entalla de 50 mm de profundidad y fueron prefisuradas hasta alcanzar un Crack Mouth Opening Displacement (CMOD) de 0,65mm. Las probetas S fueron prefisuradas sin entalla hasta alcanzar una pérdida de rigidez del 50%. Se montaron las probetas en los bastidores de fluencia en donde se mantuvo un nivel de carga del 50% de la resistencia residual obtenida del ensayo de prefisura para las probetas R y un nivel de carga entre el 68% y el 86% para las probetas S. Los ensayos de fluencia en flexión abarcaron 270 días, apreciándose una estabilizando más temprana para las probetas tipo S. De los resultados del ensayo de fluencia se calcularon los coeficientes y se compararon con los propuestos por distintos autores para el UHPFRC, dando como resultado que los valores de fluencia obtenidos de manera experimental son ligeramente menores que los propuestos quedando estos del lado de la seguridad., Los autores agradecen la financiación recibida desde el Ministerio de Economía y Competitividad a través de los Proyectos "BIA2012-35776 (FISNE)” y “BIA2016-78460- C3-1-R (BESHO/DEHMAR)”.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Bond of reinforcing bars to steel fiber reinforced concrete

  • García Taengua, Emilio José
  • Martí Vargas, José Rocío|||0000-0003-1665-2348
  • Serna Ros, Pedro|||0000-0001-8754-1165
Steel fiber reinforced concrete (SFRC) has been increasingly used during recent years. Regarding bond of rebars to concrete, fibers provide passive confinement and improve bond capacity in terms of bond strength and, more importantly, toughness. An extensive experimental programme has been carried out, and SFRC specimens with embedded rebars have been subjected to the Pull Out Test to obtain the bond stress slip curves, retaining the bond strength and the area under the curve as measures of the bond capacity of concrete. The following parameters were considered: concrete compressive strength (30-50 MPa), rebar diameter (8-20 mm), concrete cover (between 30 mm and 5 times rebar diameter), fiber content (up to 70 kg/m(3)), and the slenderness and length of the steel fibers used. Predictive equations have been obtained to relate the experimental results to the factors considered, and the trends observed have been analyzed and discussed. (C) 2015 Elsevier Ltd. All rights reserved., The authors of this work wish to thank both the Research Bureau of the Spanish Ministry of Science and Innovation for the funding of the projects 'BIA 2009-12722' and 'BIA 2012-35776-AR', this research being a part thereof.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A simplified five-point inverse analysis method to determine the tensile properties of UHPFRC from unnotched four-point bending tests

  • López Martínez, Juan Ángel
  • Serna Ros, Pedro|||0000-0001-8754-1165
  • Navarro-Gregori, Juan|||0000-0002-6319-7029
  • Coll Carrillo, Hugo
Characterisation of the tensile behaviour of UHPFRC remains a challenge for researchers, and an agreement on the standard test set-up and advisability of notch is yet to be reached. Bending tests are easier to conduct if compared to direct tensile tests, but require a sophisticated post-process to obtain the uniaxial tensile behaviour of specimens. Unlike notched tests, unnotched tests allow the determination of strain-hardening behaviour, which characterises UHPFRC tensile behaviour. However, post-cracking behaviour is more difficult to analyse. This work focuses on the development of a new simplified inverse analysis method applied to unnotched four-point bending tests which improves current simplified methods, but maintains the accuracy of more complex ones. For this purpose, an analytical model based on a quadrilinear assumption of tensile behaviour in tension was assumed. A statistical analysis of theoretical flexural strength vs. displacement on mid-span analytical curves was conducted to link the assumed tensile behaviour to the analytical flexural behaviour that derived from it. After this process, a simplified method to obtain not only the stressestrain behaviour prior to crack localisation, but also the stressecrack opening relationship after that point is proposed. The new method is based on the determination of only five key points in experimental bending strength vs. displacement at mid-span curves and in the application of a backof- the-envelope calculation. The analytical basis on which the method is based, justification of key point selection, and the process followed to achieve the simplified formulation, which allows dispensing with the use of a computer, are presented. An application example on a UHPFRC unnotched four-point bending test specimen, and its comparison with a point-by-point inverse analysis, are included., This work forms part of the "FISNE" research projects, with reference BIA2012-35776, supported by the Spanish Ministry of Economy and Competiveness and FEDER funds. Support for this project is gratefully acknowledged. We also wish to thank the Spanish Ministry of Education, Culture and Sport for its FPU scholarship programme.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental study on the steel-fibre contribution to concrete shearbehaviour

  • Navarro-Gregori, Juan|||0000-0002-6319-7029
  • Serna Ros, Pedro|||0000-0001-8754-1165
  • Eduardo José Mezquida Alcaraz
  • Echegaray-Oviedo, Javier Andres
This paper aims at studying the shear contribution of steel fibres in concrete. Ten reinforced concrete (RC) and steel-fibre reinforced concrete (SFRC) initially uncracked push-off specimens were tested. Average normal and transverse strains at the vicinity of the shear plane were measured by photogrammetry with good accuracy. Experimental results reveal that constant shear stress flow assumption is adequate. SFRC specimens exhibited greater shear stiffness compared to RC. Moreover, shear effectiveness of fibres after diagonal cracking seems significantly dependent on reinforcement crossing the shear plane. Numerical modelling of RC and SFRC push-off specimens shows good global behaviour., This work forms part of the PAID-06-11 programme supported by Universitat Politecnica de Valencia, and project "FISNE" BIA2012-35776 supported by the Spanish Ministry of Economy and Competitiveness.