Pasar al contenido principal

NUEVAS APLICACIONES DE ENSAYOS NO DESTRUCTIVOS BASADOS EN ONDAS MECANICAS PARA LA EVALUACION DE LA DEGRADACION EN MATERIALES CEMENTANTES

BIA2014-55311-C2-2-P

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2014
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Ultrasonic signal modality: A novel approach for concrete damage evaluation

  • CARRIÓN GARCÍA, ALICIA|||0000-0002-0630-6065
  • Gosálbez Castillo, Jorge|||0000-0001-6520-9014
  • Miralles Ricós, Ramón|||0000-0003-0039-2553
  • Paya Bernabeu, Jorge Juan|||0000-0001-7425-5311
  • Genovés, V.
[EN] In this paper, a new approach for characterizing material damage, using ultrasonic waves, is proposed. Two concrete series with two types of cement with different C3A content and similar mechanical properties were subjected to external sulphate attack (ESA) and evaluated using a novel Recurrence Plot Quantification Analysis (RQA) method. This brand new technique was compared with several methods, such as mechanical tests (compressive and flexural strength determination), dynamic test (dynamic modulus) measurements, and traditional ultrasonic measurements (propagation velocity and ultrasonic wave attenuation). In these experiments, RQA showed a high sensitivity to damage in spoiled series, improving the reliability of damage detection with ultrasonics in non-homogeneous materials compared to other non-destructive techniques. Interesting advantages of this new non-destructive technique are: a) the RQA parameter is normalized (range of 0 to 1); b) a calibration process is not required; c) the values of its standard deviation show the dispersion of the damage. It can contribute greatly to the diagnosis of the degree of damage to a material, when combined with other traditional measures such as the attenuation of the material., This work was supported by the Spanish Government under grants TEC2011-23403, BIA2014-55311-C2-1-P and BIA2014-55311-C2-2-P. This work is protected by the Spanish Patent and Trademark Office (SPTO) under reference P201630212.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optimized ultrasonic attenuation measures for non-homogeneous materials

  • Genovés Gómez, Vicente
  • Gosálbez Castillo, Jorge|||0000-0001-6520-9014
  • CARRIÓN GARCÍA, ALICIA|||0000-0002-0630-6065
  • Miralles Ricós, Ramón|||0000-0003-0039-2553
  • Paya Bernabeu, Jorge Juan|||0000-0001-7425-5311
In this paper the study of frequency-dependent ultrasonic attenuation in strongly heterogeneous materials is addressed. To determine the attenuation accurately over a wide frequency range, it is necessary to have suitable excitation techniques. Three kinds of transmitted signals have been analysed, grouped according to their bandwidth: narrowband and broadband signals. The mathematical formulation has revealed the relation between the distribution of energy in their spectra and their immunity to noise. Sinusoidal and burst signals have higher signal-to-noise ratios (SNRs) but need many measurements to cover their frequency range. However, linear swept-frequency signals (chirp) improve the effective bandwidth covering a wide frequency range with a single measurement and equivalent accuracy, at the expense of a lower SNR. In the case of highly attenuating materials, it is proposed to use different configurations of chirp signals, enabling injecting more energy, and therefore, improving the sensitivity of the technique without a high time cost. Thus, if the attenuation of the material and the sensitivity of the measuring equipment allows the use of broadband signals, the combination of this kind of signal and suitable signal processing results in an optimal estimate of frequency-dependent attenuation with a minimum measurement time., This work has been supported by the Spanish Administration under grant BIA2014-55311-C2-2-P.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effects of slow dynamics and conditioning on non-linear hysteretic material evaluation using impact resonance acoustic spectroscopy

  • CARRIÓN GARCÍA, ALICIA|||0000-0002-0630-6065
  • Paya Bernabeu, Jorge Juan|||0000-0001-7425-5311
  • Gosálbez Castillo, Jorge|||0000-0001-6520-9014
  • Genovés, V.
  • Perez, G.
  • Bittner, J.
  • POPOVICS, J.S.
[EN] The microstructural features of heterogeneous and porous materials give rise to unique non-linear dynamic behaviour. The purpose of this work is to investigate the dynamic response of thermally damaged concrete specimens measured by two different techniques: Non-linear Impact Resonance Acoustic Spectroscopy (NIRAS) and new Flipped Accumulative Non-linear Single Impact Acoustic Spectroscopy (FANSIRAS). Specimens were characterised in two different dynamic condition states of the material: relaxed and conditioned. The specimen¿s relaxed state indicates that no previous dynamic excitation event ocurred. The conditioned state denotes that the specimen has been dynamically tested before. The NIRAS results show that the non-linear material parameters, af and aQ , are affected by their previous dynamic history (its conditioning). The recently proposed algorithm, FANSIRAS, extracts from a single resonant signal equivalent results to NIRAS when the specimen is conditioned. In this situation, both parameters af and aQ were equivalent. The results suggest that new NDT parameters based on non-linear hysteretic parameters can quantify the damage level of thermally treated mortar specimens., This work has been supported by the Spanish Administration under grants BIA2014-55311-C2, BIA2017-87573-C2, BES2015-071469, PAID-10-19 and FEDER funds.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Ultrasonic and impact spectroscopy monitoring on internal sulphate attack of cement-based materials

  • Genovés Gómez, Vicente
  • Vargas, F.
  • Gosálbez Castillo, Jorge|||0000-0001-6520-9014
  • CARRIÓN GARCÍA, ALICIA|||0000-0002-0630-6065
  • Borrachero Rosado, María Victoria|||0000-0002-7873-0658
  • Paya Bernabeu, Jorge Juan|||0000-0001-7425-5311
[EN] An exhaustive monitoring of an internal sulphate attack of Portland cement-based materials is addressed. Four series of Portland cement mortars with different amounts of gypsum (0%¿2% SO3 respect to the cement by mass) were monitored by means of physical, microstructural and non-destructive tests, studying specimens with a low expansion rate to examine the sensitivity of the applied techniques. The expansion analysis has shown the suitability of a fitting model, allowing the examination of two characteristic parameters: the characteristic time of the expansion reaction and the maximum amplitude of the expansion. In the mechanical analysis, higher values of Rc and Rf were attained as the gypsum content decreased. A microstructural analysis (thermogravimetry and FESEM) supported ettringite formation and expansion process. These results have been correlated with non-destructive tests: impact resonance acoustic spectroscopy and ultrasonic measures. The dynamic modulus and ultrasonic pulse velocity have closely predicted the stiffness of the specimens. The total material attenuation (absorbed energy of the chirp signal ultrasonic wave) presented different trends, showing clear differences for the most damaged series (2% SO3). Attenuation supplied interesting information about the hardening process and the microcracking effect due to a mortar expansion higher than 0.04%. The novelties of this study are the exhaustive monitoring of an internal sulphate attack, as well as the examination of the sensitivity of brand new NDT techniques when this damage process overlaps with the curing process., This work has been supported by the Spanish Administration under grants TEC2011-23403, BIA2014-55311-C2-1-P and BIA2014-55311-C2-2-P.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Airborne non-contact and contact broadband ultrasounds for frequency attenuation profile estimation of cementitious materials

  • Gosálbez Castillo, Jorge|||0000-0001-6520-9014
  • CARRIÓN GARCÍA, ALICIA|||0000-0002-0630-6065
  • Bosch Roig, Ignacio|||0000-0003-3190-3635
  • Wright, W.M.D.
  • Jiang, W.
  • Genovés, V.
[EN] In this paper, the study of frequency-dependent ultrasonic attenuation in strongly heterogeneous cementitious materials is addressed. To accurately determine the attenuation over a wide frequency range, it is necessary to have suitable excitation techniques. We have analysed two kinds of ultrasound techniques: contact ultrasound and airborne non-contact ultrasound. The mathematical formulation for frequency-dependent attenuation has been established and it has been revealed that each technique may achieve similar results but requires specific different calibration processes. In particular, the airborne non-contact technique suffers high attenuation due to energy losses at the air-material interfaces. Thus, its bandwidth is limited to low frequencies but it does not require physical contact between transducer and specimen. In contrast, the classical contact technique can manage higher frequencies but the measurement depends on the pressure between the transducer and the specimen. Cement specimens have been tested with both techniques and frequency attenuation dependence has been estimated. Similar results were achieved at overlapping bandwidth and it has been demonstrated that the airborne non-contact ultrasound technique could be a viable alternative to the classical contact technique., The authors acknowledge the support from University College Cork (Ireland), Universidad Politecnica de Valencia and the Spanish Administration under grant BIA2014-55311-C2-2-P and Salvador Madariaga's Programme (PR2016-00344/PR2017-00658).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Utilización de la técnica de georradar sin contacto para el análisis de elementos constructivos de la iglesia de San Nicolás de Valencia

  • Gosálbez Castillo, Jorge|||0000-0001-6520-9014
  • Bosch Roig, Ignacio|||0000-0003-3190-3635
[ES] El GPR se basa en la transmisión de señales de radiofrecuencia hacia el interior del material a inspeccionar. Las heterogeneidades del material (clavos, humedades o cambios de material) provocan que parte de la energía sea reflejada hacia la superficie generándose una imagen bidimensional donde se representa el nivel de señal frente al desplazamiento lineal de la antena y profundidad inspeccionada. La iglesia de San Nicolás está situada en Valencia y es un ejemplo de construcción gótica con decoración barroca. Aunque algunos de los frescos de esta iglesia fueron ya restaurados en 1920, actualmente se está procediendo a su restauración integral gracias al apoyo económico de la Fundación Hortensia Herrero. Es por ello, que la utilización de la técnica no destructiva del GPR es de interés ya que permite la evaluación del estado de los elementos constructivos sin contacto físico de la antena preservando al máximo el elemento inspeccionado. Ahora bien, al no poder existir ningún contacto físico, no hay sincronización entre el desplazamiento de la antena y la imagen obtenida, imposibilitando la medición de heterogeneidades de manera precisa. En este artículo se presentan los últimos resultados obtenidos que se centran en el seguimiento del perfil de la cubierta, la detección de una cámara hueca y su posterior consolidación en el interior de uno de los nervios y la verificación de la realización de medidas fiables de profundidades., Este trabajo se ha realizado como parte del proyecto de investigación PROMETEOII/2014/032 y del proyecto "Restauración de las pinturas murales [...] de la Iglesia Parroquial de San Nicolás [...]" financiado por la "Fundación Hortensia Herrero" a través de Arzobispado de Valencia
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Ultrasonic broadband signal monitoring of Glass-fiber Reinforced Cement (GRC) bending tests

  • Genovés, V.
  • Gosálbez Castillo, Jorge|||0000-0001-6520-9014
  • CARRIÓN GARCÍA, ALICIA|||0000-0002-0630-6065
  • Miralles Ricós, Ramón|||0000-0003-0039-2553
  • Paya Bernabeu, Jorge Juan|||0000-0001-7425-5311
[EN] In this study, complete ultrasonic monitoring of Glass-fiber Reinforced Cement plates under bending tests was addressed. In this kind of experiment, the mechanical properties of the specimen continuously change during the test, thus, the acquisition time of the ultrasonic signals is a critical variable. In order to overcome this drawback, a new ultrasonic procedure based on broadband signals (chirp) has been applied. Following this line of thought, the analysed ultrasonic parameters have been split into the parameters that only depend on time, and those that depend on both time and frequency. In particular,the frequency dependent attenuation parameter allows characterizing the evolution of the plate being damaged over a wide frequency range and significantly detecting the main two events happening during the experiment: the first crack and the maximum stress point. In short, this paper demonstrates the suitability of ultrasonic broadband signals for characterizing fiber-reinforced cementitious composites under bending stress., This work has been supported by the Spanish Administration under grants, BES-2015-071469, TEC2011-23403, BIA2014-55311-C2-1-P and BIA2014-55311-C2-2-P.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Nuevas técnicas de ensayos no destructivos basadas en ondas mecánicas para la valoración del daño en materiales cementicios

  • Vázquez Martínez, Santiago
[ES] En la actualidad, una gran cantidad de infraestructuras están compuestas de forma parcial o total de materiales cementicios, siendo el hormigón uno de los materiales cementicios más antiguos y utilizados en la construcción debido a su bajo coste, durabilidad y características mecánicas y estructurales. Pese a sus características, estos materiales están expuestos a diversas condiciones adversas del entorno y sufren procesos de deterioro que afectan a su integridad y seguridad. El reconocimiento de la integridad y seguridad en las estructuras cementicias ha implicado una extensa investigación y el desarrollo de diversas pruebas para verificar su calidad y estado. Mediante la destrucción de una muestra extraída de la estructura, en el caso de los ensayos destructivos (ED), o mediante la inspección de la estructura sin necesidad de dañarla o alterar sus propiedades, en el caso de los ensayos no destructivos (END). Existen multitud de técnicas END que tratan de caracterizar estas estructuras sin dañarlas, siendo la inspección mediante ultrasonidos una de las más utilizadas en materiales cementicios. Tradicionalmente estas técnicas ultrasónicas se basan en el estudio de las ondas longitudinales (P) y transversales (S), que permiten caracterizar una estructura mediante la realización de múltiples medidas. Sin embargo, existe otro tipo de ondas, formadas por la superposición de los desplazamientos de las partículas de las ondas P y S denominadas ondas guiadas, las cuales permiten inspeccionar una estructura de forma global a partir de una única medida, además de ser capaces de propagarse a grandes distancias manteniendo una buena relación señal-a-ruido en comparación a las ondas P y S. Dentro de las ondas guiadas más utilizadas para inspeccionar materiales cementicios, se encuentran las ondas de Rayleigh y las ondas de Lamb. Las ondas de Rayleigh se propagan en estructuras de gran espesor, mientras que las ondas de Lamb se propagan en placas. Las ondas de Lamb presentan una naturaleza dispersiva y multimodal. Su naturaleza dispersiva implica que las velocidades de fase y grupo de estas ondas depende de la frecuencia, mientras que la naturaleza multimodal implica que existen cada vez más modos de propagación conforme aumenta la frecuencia de excitación. Se pueden excitar y detectar selectivamente los distintos modos de Lamb mediante la incidencia oblicua, es decir, variando la inclinación del transmisor y el receptor. Para ello, existen distintas técnicas de acoplamiento que permiten la incidencia oblicua, como el acoplamiento por cuñas sólidas, el acoplamiento por agua y el acoplamiento por aire. La presente tesis se ha centrado en el estudio de nuevas técnicas de END basadas en ondas guiadas para caracterizar diferentes tipos de daño en los materiales cementicios. Para ello, se han llevado a cabo un número considerable de medidas experimentales basadas en distintas técnicas de acoplamiento para la generación y captación de ondas guiadas. Inicialmente se han analizado materiales homogéneos como los metales, para, posteriormente, utilizar el conocimiento adquirido en dichos materiales y estudiar materiales más heterogéneos como los cementicios. Se han evaluado diferentes tipos de técnicas de acoplamiento junto con diferentes tipos de transductores. Los materiales cementicios se han inspeccionado mediante ondas guiadas ultrasónicas con dos tipos de daño: la carbonatación, estudiando el efecto con probetas de dos capas de mortero, y el envejecimiento de fibras en placas de cemento reforzado con fibra de vidrio (GRC). Se ha demostrado que las ondas guiadas son sensibles a estos daños, obteniendo resultados esperanzadores. Concretamente, las ondas de Rayleigh se han utilizado en el daño por carbonatación debido a su sensibilidad a capas superficiales de degradación, mientras que en el envejecimiento de fibras se han utilizado las ondas de Lamb, por su sensibilidad a defectos a lo largo, [CA] En l'actualitat, una gran quantitat d'infraestructures estan formades totalment o parcialment de materials cementants. El formigó és un dels materials cementants més antics i utilitzats en la construcció degut al seu preu, la seua durabilitat i les seues característiques mecàniques i estructurals. Malgrat la seua durabilitat i característiques, aquests materials estan exposats a diverses condicions adverses de l'entorn i pateixen processos de deterioració que afecten la seua integritat i seguretat. El reconeixement de la integritat i seguretat en les estructures cementants ha implicat una extensa investigació i el desenvolupament de diverses proves per a verificar la seua qualitat i estat. Mitjançant la destrucció d'una mostra de l'estructura en el cas dels assajos destructius, o mitjançant la inspecció de l'estructura sense danyar-la o alterar les seues propietats en el cas dels assajos no destructius. Existeixen multitud de tècniques d'inspecció no destructiva que tracten de caracteritzar aquestes estructures sense danyar-les. La inspecció mitjançant ultrasons és un dels assajos no destructius més utilitzats en materials cementants. Tradicionalment, aquestes tècniques ultrasòniques estan basades en l'estudi de les ones longitudinals (P) i transversals (S), que permeten caracteritzar una estructura mitjançant la realització de múltiples mesures en l'estructura. No obstant, existeixen altres tipus d'ones, formades per la superposició dels desplaçaments de les partícules de les ones P i S, denominades ones guiades, les quals permeten inspeccionar una estructura de manera global a partir d'una única mesura, a més de poder propagar-se a grans distàncies mantenint una bona relació senyal-soroll en comparació a les ones P i S. Dins de les ones guiades més utilitzades per a inspeccionar materials cementants, es troben les ones de Rayleigh i les ones de Lamb. Les ones de Rayleigh es propaguen en estructures de gran grossària, mentre que les ones de Lamb es propaguen en plaques. Les ones de Lamb presenten una naturalesa dispersiva i multimodal. La seua naturalesa dispersiva implica que les velocitats de fase i grup d'aquestes ones depenen de la freqüència, mentre que la naturalesa multimodal implica que apareguen més modes de propagació a l'augmentar la freqüència d'excitació. Es poden excitar i detectar selectivament els diferents modes de Lamb mitjançant la incidència obliqua, és a dir, variant la inclinació del transmissor i el receptor. Existeixen diferents tècniques d'acoblament que permeten la incidència obliqua, com l'acoblament per metacrilat, l'acoblament per aigua i l'acoblament per aire. Aquesta tesi s'ha enfocat en l'estudi de noves tècniques d'assajos no destructius basades en ones guiades (ones de Rayleigh i ones de Lamb) per a caracteritzar diferents tipus de dany en els materials cementants. S'han realitzat un nombre considerable de mesures experimentals basades en diferents tècniques d'acoblament per a la generació i captació d'ones guiades. Inicialment s'han analitzat materials homogenis com els metalls per a, posteriorment, utilitzar el coneixement adquirit en aquests materials i estudiar d'altres més heterogenis com els cementants. Concretament, s'han avaluat diferents tipus de tècniques d'acoblament i diferents tipus de transductors. Els materials cementants s'han inspeccionat mitjançant ones guiades ultrasòniques amb dos tipus de dany o degradació: la carbonatació, estudiant el seu efecte amb provetes de dues capes de morter, i l'envelliment de fibres en plaques de ciment reforçat amb fibra de vidre (GRC). S'ha demostrat que les ones guiades són sensibles a aquests danys, obtenint resultats esperançadors. Concretament, les ones de Rayleigh s'han utilitzat en el dany per carbonatació a causa de la seua sensibilitat a capes superficials de degradació, mentre que en l'envelliment de fibres s'han utilitzat les ones de Lamb, per la seua sensibilitat a defe, [EN] Nowadays, a large number of infrastructures are partially or wholly built with cementitious materials. Concrete is one of the oldest and most popular cementitious materials due to its low cost, durability and remarkable mechanical and structural characteristics. However, if these materials are exposed to different environments and harsh conditions, they suffer damaging processes that affect their integrity and safety. To verify their state and quality, extensive research has been conducted and several tests have been developed, such as destructive testing and non-destructive testing. Destructive testing (DT) requires a sample of the inspected structure while non-destructive testing (NDT) allows the inspection of the structure without altering its properties and without damaging it. There are several NDT techniques that characterize cementitious structures without harming them, such as ultrasonic testing, which is one of the most widely used. This technique is based on the study of longitudinal (P) and shear (S) waves, which enable the characterization of a structure by a point-by-point scan. However, there are another kind of waves, called guided waves, which are composed of the superposition of the P and S wave particle displacements. Unlike P and S waves, guided waves allow a global inspection of a structure from a single transducer position and they are able to propagate over long distances with a good signal-to-noise ratio. Rayleigh and Lamb waves are the most frequently used guided waves in NDT of cementitious materials. Rayleigh waves propagate in thick structures while Lamb waves propagate in plate-like structures. Lamb waves are dispersive (their phase and group velocities depend on frequency) and multimodal (as frequency increases, many propagation modes with different velocities exist in the received signal). Lamb wave modes can be selectively excited and detected by means of oblique incidence, i.e., by varying the inclination of the transmitting and receiving transducers. Different coupling techniques can be used to change the inclination of the transducers, such as the contact technique with angle beam wedge transducers, water coupling and air coupling. This thesis has been focused in the study of new NDT techniques based on guided waves (Rayleigh and Lamb waves) to characterize different types of damage of cementitious materials. For this goal, a significant number of experimental arrangements based on different coupling techniques have been carried out. Firstly, homogeneous materials as metals have been analized, because they are a reference in guided wave testing. After performing different experiments in metals, the acquired knowledge has been used to inspect heterogeneous materials as cementitious ones. Different coupling techniques (variable angle wedges, immersion testing, fixed angle wedges, ...) with different types of transducers (contact transducers, immersion transducers and air-coupled transducers) have been employed. Cementitious materials with two damaging processes have been inspected by means of guided waves: two-layered mortar specimens to study carbonation and glass-fibre reinforced cement (GRC) plates to study fiber ageing. This thesis demonstrates that guided waves are sensitive to these damaging processes and the obtained results are encouraging. Specifically, Rayleigh waves have been used to detect carbonation due to its sensitivity to surface layers, while Lamb waves have been used to detect fiber ageing due to its sensitivity to defects along the thickness of the GRC plates., La investigación realizadaen esta tesis se ha financiado con las siguientes ayudas y proyectos concedidos por el gobierno español: Ayudas para contratos predoctorales para la formación de doctores 2015 (BES-2015-071958); Nuevas aplicaciones de ensayos no destructivos basados en ondas mecánicas para la evaluación de la degradación en materiales cementantes (BIA2014-55311-C2-2-P); Desarrollo y aplicación de ensayos no destructivos basados en ondas mecánicas para la evaluación y monitorización de reología y autosanación en materiales cementantes (BIA2017-87573-C2)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Flipped Accumulative Non-Linear Single Impact Resonance Acoustic Spectroscopy (FANSIRAS): A novel feature extraction algorithm for global damage assessment

  • CARRIÓN GARCÍA, ALICIA|||0000-0002-0630-6065
  • Paya Bernabeu, Jorge Juan|||0000-0001-7425-5311
  • Gosálbez Castillo, Jorge|||0000-0001-6520-9014
  • Genovés, V.
  • Pérez, G.
[EN] High amplitude non-linear acoustic methods have shown great potential for the identification of micro-damage in inhomogeneous materials such as concrete. Usually, these methods evaluate non-linearity parameters related to the hysteretic behaviour from the dependence of the shifts in both frequency and damping on the amplitude of the strain. A deep understanding of the reverberation phenomena has been obtained in order to introduce a novel signal processing approach called FANSIRAS (Flipped Accumulative Nonlinear Single Impact Resonance Acoustic Spectroscopy). Traditional acoustic spectroscopy techniques, NIRAS (Non-linear Impact Resonance Acoustic Spectroscopy) and NSIRAS (Non-linear Single Impact Acoustic Spectroscopy), have been analyzed and compared with the brand new approach when providing quantitative information related to the degree of micro-cracking in thermal damaged concrete based materials. The new resonance-based algorithm demonstrates that the non-linear non-classical parameters can be determined through a single resonance frequency measurement, obtaining the expected sensitivity to internal damage. Its simplicity and robustness may be important in industrial applications. (C) 2018 Elsevier Ltd. All rights reserved., This work has been supported by the Spanish Administration under grants TEC2011-23403, BES2015-071469, BIA2014-55311-C2-1-P and BIA2014-55311-C2-2-P. The authors are also grateful for FEDER funds.