Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación
Artículo científico (JournalArticle)
Effects of temperature and moisture fluctuations for suitable use of raw-crushed wind-turbine blade in concrete
Raw-crushed wind-turbine blade (RCWTB), a waste from the recycling of wind-turbine blades, is used as a raw material in concrete in this research. It contains not only fiberglass-composite fibers that bridge the cementitious matrix but also polyurethane and balsa-wood particles. Therefore, concrete containing RCWTB can be notably affected by moisture and temperature fluctuations and by exposure to high temperatures. In this research, the performance of five concrete mixes with 0.0%, 1.5%, 3.0%, 4.5%, and 6.0% RCWTB, respectively, is studied under moist/dry, alternating-sign-temperature-shock, and high-temperature-shock tests. Two damage mechanisms of RCWTB within concrete were found through these tests: on the one hand, micro-cracking of the cementitious matrix, which was verified by microscopic analyses and was dependent on concrete porosity; on the other, damage and degradation of the RCWTB components, as the polyurethane melted, and the balsa-wood particles burned. Both phenomena led to larger remaining-strain levels and reduced concrete compressive strength by up to 25% under temperature and humidity variations, although the bridging effect of the fiberglass-composite fibers was effective when adding RCWTB amounts higher than 3.0%. The compressive-strength loss after the high-temperature-shock test increased with the RCWTB content, reaching maximum values of 8% after an exposure time of 7 days. Statistical analyses revealed that effect of the RCA amount in the concrete was conditioned by the exposure times in all the tests. The accurate definition of those times is therefore key to set an RCWTB content in concrete that ensures its suitable behavior under the environmental conditions analyzed., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This research work was funded by the Spanish Ministry of Universities, MICINN, AEI, EU, ERDF, and NextGenerationEU/PRTR [grant numbers PID2020-113837RB-I00, PID2023-146642OB-I00,https://doi.org/10.13039/501100011033, TED2021-129715B-I00, and FPU21/04364]; the Junta de Castilla y León (Regional Government) and ERDF [grant numbers UIC-231, BU033P, and3; BU066-22]; and, finally, the University of Burgos [grant number SUCONS, Y135.GI].
Proyecto:
AEI / Plan Estatal de Investigación Científica y Técnica y de Innovación 2017-2020 PID2020-113837RB-I00
,
AEI / Plan Estatal de Investigación Científica PID2023-146642OB-I00
,
AEI / Técnica y de Innovación 2021-2023 TED2021-129715B-I00
,
MIU / Plan Estatal de Investigación Científica FPU21-04364
,
Junta de Castilla y León / Técnica y de Innovación 2021-2023 UIC 231
,
Junta de Castilla y León / Plan Estatal de Investigación Científica y Técnica y de Innovación 2021-2023 BU033P23
,
Junta de Castilla y León BU066-22
,
UBU Y135.GI
HANDLE: http://hdl.handle.net/10259/9763
Ver en: http://hdl.handle.net/10259/9763