Pasar al contenido principal

ANALISIS INTEGRAL DE HORMIGONES, CON TRITURADO DE PALAS DE AEROGENERADORES Y ARIDO RECICLADO DE SUS CIMENTACIONES, DISEÑADOS PARA LA INDUSTRIA DE LA PREFABRICACION

PID2023-146642OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2023
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE BURGOS

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Artículo científico (JournalArticle)

Effects of temperature and moisture fluctuations for suitable use of raw-crushed wind-turbine blade in concrete

  • Revilla Cuesta, Víctor
  • Hurtado Alonso, Nerea
  • Manso Morato, Javier
  • Serrano López, Roberto
  • Manso Villalaín, Juan Manuel
Raw-crushed wind-turbine blade (RCWTB), a waste from the recycling of wind-turbine blades, is used as a raw material in concrete in this research. It contains not only fiberglass-composite fibers that bridge the cementitious matrix but also polyurethane and balsa-wood particles. Therefore, concrete containing RCWTB can be notably affected by moisture and temperature fluctuations and by exposure to high temperatures. In this research, the performance of five concrete mixes with 0.0%, 1.5%, 3.0%, 4.5%, and 6.0% RCWTB, respectively, is studied under moist/dry, alternating-sign-temperature-shock, and high-temperature-shock tests. Two damage mechanisms of RCWTB within concrete were found through these tests: on the one hand, micro-cracking of the cementitious matrix, which was verified by microscopic analyses and was dependent on concrete porosity; on the other, damage and degradation of the RCWTB components, as the polyurethane melted, and the balsa-wood particles burned. Both phenomena led to larger remaining-strain levels and reduced concrete compressive strength by up to 25% under temperature and humidity variations, although the bridging effect of the fiberglass-composite fibers was effective when adding RCWTB amounts higher than 3.0%. The compressive-strength loss after the high-temperature-shock test increased with the RCWTB content, reaching maximum values of 8% after an exposure time of 7 days. Statistical analyses revealed that effect of the RCA amount in the concrete was conditioned by the exposure times in all the tests. The accurate definition of those times is therefore key to set an RCWTB content in concrete that ensures its suitable behavior under the environmental conditions analyzed., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This research work was funded by the Spanish Ministry of Universities, MICINN, AEI, EU, ERDF, and NextGenerationEU/PRTR [grant numbers PID2020-113837RB-I00, PID2023-146642OB-I00,https://doi.org/10.13039/501100011033, TED2021-129715B-I00, and FPU21/04364]; the Junta de Castilla y León (Regional Government) and ERDF [grant numbers UIC-231, BU033P, and3; BU066-22]; and, finally, the University of Burgos [grant number SUCONS, Y135.GI].
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Artículo científico (JournalArticle)

Strength-based RSM optimization of concrete containing coarse recycled concrete aggregate and raw-crushed wind-turbine blade

  • Hurtado Alonso, Nerea
  • Manso Morato, Javier
  • Revilla Cuesta, Víctor
  • Skaf Revenga, Marta
Recycled Concrete Aggregate (RCA) and Raw-Crushed Wind-Turbine Blade (RCWTB) are waste materials obtained from decommissioned wind turbines after crushing their foundations and blades, respectively. Their use as raw materials in concrete allows their recycling. RCA increases concrete sustainability, while the fibers of Glass Fiber-Reinforced Polymer (GFRP) in RCWTB (66.8 % wt.) improve its bending performance. Nevertheless, only balanced waste combinations provide an adequate concrete behavior. Following a characterization of concrete in terms of fresh and strength performance, Response Surface Method (RSM) was conducted based on the experimental results to define the optimum waste combinations to reach a concrete strength performance adequate for engineering applications. RSM highlighted the need to limit the RCWTB content to 3 % to reach a compressive strength higher than 45 MPa, while amounts below 3 % and above 7 % would allow obtaining a flexural strength over 5.5 MPa. In both cases, the maximum content of coarse RCA should be 80 %. 70 % coarse RCA and a RCWTB amount between 6 % and 10 % would enable to develop concrete mixes with conventional strengths of 30–40 MPa under compression and 5 MPa under bending. RSM results revealed that RCWTB and their GFRP fibers properly behave in concrete with coarse RCA., This research work was supported by the Spanish Ministry of Universities, MICINN, AEI, EU, ERDF and NextGenerationEU/PRTR [grant numbers PID2020-113837RB-I00; 10.13039/501100011033; TED2021-129715 B–I00; PID2023-146642OB-I00; FPU21/04364]; the Junta de Castilla y León (Regional Government) and ERDF [grant number UIC-231; BU033P23; BU066-22]; and, finally, the University of Burgos [grant number SUCONS, Y135. GI].
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Artículo científico (JournalArticle)

Deepening the effect of selectively crushed wind-turbine blade on the dimensional stability and high-temperature resistance of concrete

  • Revilla Cuesta, Víctor
  • Skaf Revenga, Marta
  • Manso Morato, Javier
  • Hurtado Alonso, Nerea
  • Manso Villalaín, Juan Manuel
Selectively Crushed Wind-Turbine Blade (SCWTB) is obtained through knife crushing of panels from wind-turbine blades. Two thirds of SCWTB weight consist of GFRP-composite fibers, which may improve both dimensional stability and high-temperature resistance of concrete. In this investigation, the evaluation of such aspects in concrete containing 1.5 %, 3.0 %, 4.5 % and 6.0 % SCWTB by volume is addressed. For this purpose, plastic shrinkage, drying shrinkage, total shrinkage, and thermal expansion were evaluated regarding dimensional stability, while resistance to high temperatures was assessed through accelerated-aging and thermal-shock tests. The results revealed that 6.0 % SCWTB reduced by half concrete plastic shrinkage, and total shrinkage by 40–50 % at 7 days and by 10–20 % at 91 days. Furthermore, the initial thermal strain was decreased from SCWTB contents of 3.0 %, which in turn reduced the linear thermal expansion coefficient, which had a value of 1.49·10−5 °C−1 in concrete with 6.0 % SCWTB. Finally, concrete with SCWTB maintained adequate compressive strength after accelerated aging and air-heating thermal shock, reaching values above 40 MPa, and halved the loss of flexural strength when added in a content of 6.0 %. Scanning electron microscopy revealed that high temperatures caused micro-cracks that started in weak zones and propagated along the glass fibers of GFRP, but the bond between the cementitious matrix and the GFRP-composite fibers was ideal, so the matrix fractured instead of the fibers slipping when loading. The improvements induced by SCWTB were statistically significant, so this waste can be considered a value-added material in terms of the concrete behavior analyzed., This research work was supported by the Spanish Ministry of Science, Innovation and Universities MICIU, AEI, EU, ERDF and NextGenerationEU/PRTR [grant numbers PID2023-146642OB-I00; 10.13039/501100011033; TED2021-129715B-I00; FPU21/04364]; the Junta de Castilla y León (Regional Government) and ERDF [grant number UIC-231; BU033P23; BU066-22]; and, finally, the University of Burgos [grant number SUCONS, Y135.GI].
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Artículo científico (JournalArticle)

Low-Strength Concrete with Raw-Crushed Wind Turbine Blade and Coarse Recycled Aggregate

  • Hurtado Alonso, Nerea
  • Manso Morato, Javier
  • Revilla Cuesta, Víctor
  • Skaf Revenga, Marta
  • Manso Villalaín, Juan Manuel
Nonselective crushing of wind turbine blades results in raw-crushed wind turbine blade (RCWTB), a material that can be used in concrete production. Wind farm decommissioning can also generate coarse recycled aggregate (CRA) from the demolition of wind turbine concrete footings. This paper proposes a first approach for the joint management of both wastes through their simultaneous use in low-strength concrete, with a target compressive strength of 25 MPa. Mixes with 50% and 100% CRA, and 0% and 10% RCWTB as a cement addition, were designed, with the effect of CRA content not being statistically significant, to analyze its interaction with RCWTB. The results showed that, on the one hand, RCWTB reduced strength and stiffness under compression by a maximum of 9%–15%, although the target strength was achieved in all mixes; the presence of balsa wood and polymer particles in RCWTB, with high flexibility, could explain these reductions. On the other hand, the stitching effect of the glass fiber–reinforced polymer fibers present in RCWTB largely improved the bending-tensile mechanical properties. For example, flexural strength was almost doubled (from 2.51 to 4.99 MPa) when RCWTB was combined with 50% CRA. Additionally, RCWTB reduced both the embodied carbon and cost of low-strength concrete, resulting in doubled flexural-strength efficiency (flexural strength per unit of embodied carbon and cost), regardless of the CRA content. Overall, the best interaction was observed with 10% RCWTB and 50% RCA. Therefore, this study opens the possibility of simultaneously using RCWTB and CRA in low-strength concrete for applications where bending stresses predominate., This research work was supported by the Ministerio de Ciencia, Innovación y Universidades (MICIU), Agencia Estatal de Investigación (AEI), European Union (EU), European Regional Development Fund (ERDF), and NextGenerationEU/PRTR (Grant Nos. PID2020-113837RB-I00, PID2023-146642OB-I00, 10.13039/501100011033, TED2021-129715B-I00, and FPU21/04364); the Junta de Castilla y León (Regional Government) and ERDF (Grant Nos. UIC-231, BU033P23, and BU066-22), and, finally, the University of Burgos (Grant No. SUCONS, Y135.GI). Authors Nerea Hurtado-Alonso and Javier Manso-Morato contributed equally to this paper.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Artículo científico (JournalArticle)

Long-term mechanical performance of concrete with high amounts of wind turbine blade mixed waste: Analysis of temporal evolution mechanisms

  • Manso Morato, Javier
  • Hurtado Alonso, Nerea
  • Serrano López, Roberto
  • Revilla Cuesta, Víctor
  • Ortega López, Vanesa
Fiber-Reinforced Concrete (FRC) was manufactured by the addition of high percentages of mechanically recycled wind-turbine blades, known as Raw-Crushed Wind-Turbine Blade (RCWTB). This sustainable material was added as aggregate replacement up to 10 % vol., while keeping the cement content equal for all mixes, and the effects on several fields were evaluated. First, strength (compressive, tensile splitting and flexural testing) and stiffness were evaluated at 7, 28, 90 and 180 days of age. Results showed that low RCWTB contents improved compressive (above 60 MPa) and tensile strengths (over 6.50 MPa under bending) due to enhanced matrix compactness. Nevertheless, the large proportions of deformable particles when using high RCWTB contents slightly hindered mechanical performance. Second, temporal strength development mechanism was evaluated through Scanning Electron Microscopy (SEM) on specimens that underwent mechanical testing and explained through schematics by the authors. This analysis revealed that the porous particles of RCWTB, acting as water reservoirs, accelerated matrix hydration and improved Interfacial Transition Zones (ITZ) around the Glass Fiber-Reinforced Polymer (GFRP) fibers of RCWTB, globally enhancing early-age strength. Third, low RCWTB levels improved abrasion resistance (up to 14.73 %), while high contents reduced surface quality but maintained acceptable performance. Finally, thermal conductivity remained stable following RCWTB incorporation at low levels and increased at higher contents (up to 35.75 %) but remained within typical FRC ranges. Therefore, this research ensures proper early-age and long-term overall performance of FRC produced with RCWTB, enhancing sustainability while yielding an improved concrete material suitable for a wide variety of applications., This research work was supported by the Spanish Ministry of Science, Innovation and Universities MICIU, AEI, EU, ERDF and NextGenerationEU/PRTR [grant numbers PID2023-146642OB-I00; 10.13039/501100011033; TED2021-129715B-I00; FPU21/ 04364]; the Junta de Castilla y León (Regional Government) and ERDF [grant number UIC-231; BU033P23; BU066-22]; and, finally, the University of Burgos [grant number SUCONS, Y135.GI].
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Artículo científico (JournalArticle)

Multicriteria and response surface-based selection of coarse recycled aggregate and blade waste contents in environmentally friendly low-strength concrete

  • Revilla Cuesta, Víctor
  • Hernando Revenga, Manuel
  • Mourou, Chaimae
  • Serrano López, Roberto
The use of Coarse Recycled Aggregate (CRA) in Low-Strength Concrete (LSC), suitable for pavements, allows the sustainable revaluation of this waste material, but worsens its performance. Recycled fibers of Glass Fiber-Reinforced Polymer (GFRP) present in Raw-Crushed Wind-Turbine Blade (RCWTB) may counterbalance the detrimental effects caused by CRA addition. This research analyzes the mechanical properties, durability, cost and carbon footprint of LSC mixes with 50 % and 100 % CRA combined with 0 % and 10 % RCWTB. Stitching of the cementitious matrix by GFRP fibers improved flexural strength and energy absorption of LSC containing CRA. In addition, these fibers exerted a barrier effect against water passage and exhibited higher surface hardness, the addition of RCWTB therefore did not affect the water-absorption rate and effective porosity and increased the abrasion resistance of LSC. Finally, RCWTB also reduced the cost and carbon footprint of LSC. These enhancements caused by RCWTB were analyzed through Multi-Criteria Decision-Making (MCDM) and Response Surface Methodology (RSM), approaches novel in the literature. According to them, the joint use of CRA and RCWTB in LSC was recommended. PROMETHEE II algorithm indicated that the use of 10 % RCWTB combined with 100 % CRA was the best option due to economic and environmental advantages, as this algorithm only considered which LSC mixture was the best for each property. ELECTRE algorithm showed indifference between both CRA contents, due to the better mechanical and durability performance of 50 %-CRA LSC. TOPSIS algorithm and RSM models revealed a preference for 50 % CRA and 10 % RCWTB following quantitative calculations based on the magnitudes of the property differences between the mixes. This research demonstrates the broad suitability of LSC containing both CRA and RCWTB in construction applications, mainly regarding pavements., This research work was supported by grant TED2021-129715B-I00 funded by MICIU/AEI/10.13039/501100011033 and by European Union NextGenerationEU/PRTR; grant PID2023-146642OB-I00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF/EU; grants UIC-231 and BU033P23 funded by the Junta de Castilla y León (Regional Government) and ERDF/EU; and grant SUCONS, Y135.GI funded by the University of Burgos.