Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Ultrafine and nanoparticle formation and emission mechanisms during laser processing of ceramic materials

  • Fonseca, A.S.
  • Viana, M.
  • Querol, X.
  • Moreno, N.
  • de Francisco, I.
  • Estepa, C.
  • de la Fuente, G.F.
The use of laser technology in the ceramic industry is undergoing an increasing trend, as it improves surface properties. The present work aimed to assess ultrafine and nanoparticle emissions from two different types of laser treatments (tile sintering and ablation) applied to two types of tiles. New particle formation mechanisms were identified, as well as primary nanoparticle emissions, with concentrations reaching up to 6.7 x 10(6) particles Cm-3 and a mean diameter of 18 nm. Nanoparticle emission patterns were strongly dependent on temperature and raw tile chemical composition. Nucleation events were detected during the thermal treatment independently of the laser application. TOM images evidenced spherical ultrafine particles, originating from the tile melting processes. When transported across the indoor environment, particles increased in size (up to 38 nm) with concentrations remaining high (2.3 x 10(6) particles cm(-3)), Concentrations of metals such as Zn, Pb, Cu, Cr, As and al were found in particles < 250 nm.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Process-generated nanoparticles from ceramic tile sintering: Emissions, exposure and environmental release

  • Fonseca, A.S.
  • Maragkidou, A.
  • Viana, M.
  • Querol, X.
  • Hameri, K.
  • de Francisco, I.
  • Estepa, C.
  • Borrell, C.
  • Lennikov, V.
  • de la Fuente, G.F.
The ceramic industry is an industrial sector in need of significant process changes, which may benefit from innovative technologies such as laser sintering of ceramic tiles. Such innovations result in a considerable research gap within exposure assessment studies for process-generated ultrafine and nanoparticles. This study addresses this issue aiming to characterise particle formation, release mechanisms and their impact on personal exposure during a tile sintering activity in an industrial-scale pilot plant, as a follow-up of a previous study in a laboratory-scale plant. In addition, possible particle transformations in the exhaust system, the potential for particle release to the outdoor environment, and the effectiveness of the filtration system were also assessed. For this purpose, a tiered measurement strategy was conducted. The main findings evidence that nanoparticle emission patterns were strongly linked to temperature and tile chemical composition, and mainly independent of the laser treatment. Also, new particle formation (from gaseous precursors) events were detected, with nanoparticles <30 nm in diameter being formed during the thermal treatment. In addition, ultrafine and nano-sized airborne particles were generated and emitted into workplace air during sintering process on a statistically significant level. These results evidence the risk of occupational exposure to ultrafine and nanoparticles during tile sintering activity since workers would be exposed to concentrations above the nano reference value (NRV; 4 x 10(4) cm(-3)), with 8-hour time weighted average concentrations in the range of 1.4 x 10(5) cm(-3) and 5.3 x 10(5) cm(-3). A potential risk for nanoparticle and ultrafine particle release to the environment was also identified, despite the fact that the efficiency of the filtration system was successfully tested and evidenced a >87% efficiency in particle number concentrations removal.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Microstructural characterization and tribological behavior of Laser Furnace processed ceramic tiles

  • Rey-García, F.
  • Gutiérrez-Mora, F.
  • Borrel, C.J.
  • Estepa, L.C.
  • Angurel, L.A.
  • De La Fuente, G.F.
This paper presents, for the first time, the processing of commercial ceramic tiles by means of Laser Furnace (LF) technology and its influence on their microstructure and tribology. Commercial porcelain and white clay, partially fired ceramic tiles, were processed by this method in order to study the effect of the laser treatment and its potential to produce ceramic items on a large scale, under extreme surface temperature conditions. The microstructure and depth of the laser irradiated ceramic samples were studied by FESEM. EDX analyses were employed to study composition before and after the laser treatment. Surface roughness was determined using Confocal Microscopy, while hardness and tribological behavior were studied using Vickers indentations and a ball-on-flat apparatus, respectively.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Laser-induced coloration of ceramic tiles covered with magnetron sputtered precursor layers

  • Rico, V.J.
  • Lahoz, R.
  • Rey-García, F.
  • de Francisco, I.
  • Gil-Rostra, J.
  • Espinós, J.P.
  • de la Fuente, G.F.
  • González-Elipe, A.R.
This paper reports a new methodology for the coloring of glazed ceramic tiles consisting of the near infrared pulsed laser processing of copper containing oxide coatings prepared by magnetron sputtering. As a second approach, the employ for the same purpose of a novel laser furnace technique is also described. Changing the laser parameters and using the laser furnace to treat the tiles at high temperature during irradiation has resulted in a wide color palette. The optical characterization of the modified tiles by UV-Vis spectroscopy has been complemented with their microstructural and compositional analysis by Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), and Time Of Flight Secondary Ion Mass Spectrometry (TOF-SIMS). The chemical composition of the surface was obtained by X-ray Photoemission Spectroscopy (XPS) and its structure determined by X?ray diffraction (XRD). The chemical resistance was characterized by several tests following the norm ISO 10545-13. Color changes have been attributed to surface microstructural and chemical transformations that have been accounted for by simple models involving different ablation, melting, diffusion, and segregation/agglomeration phenomena depending on the laser treatments employed.