Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 75
Encontrada(s) 1 página(s)

Docta Complutense
Publicación Artículo científico (JournalArticle)

Prospects for γ-ray observations of the Perseus galaxy cluster with the Cherenkov Telescope Array

  • Alvarez-Crespo, N.
  • Barrio Uña, Juan Abel
  • Contreras González, José Luis
  • Láinez, M.
  • López Moya, Marcos
  • Martinez, O.
  • Mas-Aguilar, A.
  • Miener, Tjark
  • Miranda, J.M.
  • Morcuende Parrilla, Daniel
  • Nieto Castaño, Daniel
  • Rosado Vélez, Jaime
  • Sinha, Atreyee
  • Tejedor Álvarez, Luis Ángel
  • Zamanillo, V.M.
Galaxy clusters are expected to be both dark matter (DM) reservoirs and storage rooms for the cosmic-ray protons (CRp) that accumulate along the cluster’s formation history. Accordingly, they are excellent targets to search for signals of DM annihilation and decay at γ-ray energies and are predicted to be sources of large-scale γ-ray emission due to hadronic interactions in the intracluster medium (ICM). In this paper, we estimate the sensitivity of the Cherenkov Telescope Array (CTA) to detect diffuse γ-ray emission from the Perseus galaxy cluster. We first perform a detailed spatial and spectral modelling of the expected signal for both the DM and the CRp components. For each case, we compute the expected CTA sensitivity accounting for the CTA instrument response functions. The CTA observing strategy of the Perseus cluster is also discussed. In the absence of a diffuse signal (non-detection), CTA should constrain the CRp to thermal energy ratio X500 within the characteristic radius R500 down to about X500 < 3 × 10−3, for a spatial CRp distribution that follows the thermal gas and a CRp spectral index αCRp = 2.3. Under the optimistic assumption of a pure hadronic origin of the Perseus radio mini-halo and depending on the assumed magnetic field profile, CTA should measure αCRp down to about ∆αCRp ≃ 0.1 and the CRp spatial distribution with 10% precision, respectively. Regarding DM, CTA should improve the current ground-based γ-ray DM limits from clusters observations on the velocity-averaged annihilation cross-section by a factor of up to ∼ 5, depending on the modelling of DM halo substructure. In the case of decay of DM particles, CTA will explore a new region of the parameter space, reaching models with τχ > 1027 s for DM masses above 1 TeV. These constraints will provide unprecedented sensitivity to the physics of both CRp acceleration and transport at cluster scale and to TeV DM particle models, especially in the decay scenario.
Docta Complutense
Publicación Artículo científico (JournalArticle)

From terrestrialisation to disturbance: long-term trajectories of a fen ecosystem and its conservation implications in the Xistral Mountains, NW Iberia

  • Hernando Bartolomé, Álvaro
  • Moreno Martín, Álvaro
  • Magaña Ugarte, Rosina
  • Manzano, Saúl
  • Martínez Cortizas, Antonio
  • López Merino, Lourdes
Peatlands in north-west Iberia are globally important carbon reservoirs, yet their fen communities remain less well understood than those of bogs. Here, we present a multiproxy study of a ~11,100 cal. yr BP peat sequence cored at the Toxiza fen (TOX, Xistral Mountains, Galicia). Our analyses of palynology, rarefaction, charcoal, elemental composition and CIELab colour identify three main ecological phases. First, early Holocene mire initiation through terrestrialisation: wet meadows progressively replaced by a transitional fen at ~10,350 cal. yr BP, and subsequently by a Sphagnum-rich fen. Second, the mire experienced a prolonged phase of hydrological stability during the Holocene Climatic Optimum, characterised by Sphagnum-rich vegetation, high organic-matter content and sustained peat accumulation. Third, late Holocene increasing disturbance, including catchment erosion (~4900-4200 cal. yr BP) and fire-intense phases leading to an Ericaceae-rich fen; with Sphagnum partially recovered in reduced-burning intervals. Phases of ecological transition (i.e., early Holocene terrestrialisation and late Holocene disturbance) showed higher pollen richness, whereas comparatively stable values were found during the mid-Holocene, reflecting long-term ecosystem stability. Comparisons with nearby ombrotrophic mires highlight the importance of hydrological setting (minerotrophy vs. ombrotrophy) in shaping peatland vegetation trajectories under similar climatic forcing. Today the fen shows clear signs of degradation, including fire activity, sediment inputs and afforestation pressure, with no clear Sphagnum recovery. The TOX record, therefore, provides a process-based reference baseline for conservation where the mid-Holocene Sphagnum-rich phase represents a benchmark of hydrological stability and minimal disturbance, offering a framework for understanding biodiversity change and for guiding restoration of minerotrophic peatlands under ongoing environmental change.
Docta Complutense
Publicación Artículo científico (JournalArticle)

A novel experience sampling method tool integrating momentary assessments of cognitive biases: Two compliance, usability, and measurement reactivity studies

  • Boemo Prieto, María Teresa
  • Socastro, Angela
  • Blanco Martínez, Iván
  • Martin Garcia, Oscar
  • Pacheco Romero, Ana Mar
  • Rodríguez Carvajal, Raquel
  • Sánchez López, Álvaro
Background: Experience sampling methods (ESMs) are increasingly being used to study ecological emotion dynamics in daily functioning through repeated assessments taken over several days. However, most of these ESM approaches are only based on self-report assessments, and therefore, studies on the ecological trajectories of their underlying mechanisms are scarce (ie, cognitive biases) and require evaluation through experimental tasks. We developed a novel ESM tool that integrates self-report measures of emotion and emotion regulation with a previously validated app-based cognitive task that allows for the assessment of underlying mechanisms during daily functioning. Objective: The objective of the study is to test this new tool and study its usability and the possible factors related to compliance with it in terms of latency and missing responses. Among the compliance predictors, we considered psychological and time-related variables, as well as usability, measurement reactivity, and participants’ satisfaction with the tool. Methods: We conducted 2 extensive ESM studies—study 1 (N=84; a total of 3 assessments per day for 5 days) and study 2 (N=135; a total of 3 assessments per day for 10 days). Results: In both studies, participants found the tool highly usable (average usability score >81). By using mixed regression models, we found both common and specific results for the compliance predictors. In both study 1 and study 2, latency was significantly predicted by the day (P<.001 and P=.003, respectively). Participants showed slower responses to the notification as the days of the study progressed. In study 2 but not in study 1, latency was further predicted by individual differences in overload with the use of the app, and missing responses were accounted for by individual differences in stress reactivity to notifications (P=.04). Thus, by using a more extensive design, participants who experienced higher overload during the study were characterized by slower responses to notifications (P=.01), whereas those who experienced higher stress reactivity to the notification system were characterized by higher missing responses. Conclusions: The new tool had high levels of usability. Furthermore, the study of compliance is of enormous importance when implementing novel ESM methods, including app-based cognitive tasks. The main predictors of latency and missing responses found across studies, specifically when using extensive ESM protocols (study 2), are methodology-related variables. Future research that integrates cognitive tasks in ESM designs should take these results into consideration by performing accurate estimations of participants’ response rates to facilitate the optimal quality of novel eHealth approaches, as in this study.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Au Clusters Catalyze The Disulfide Metathesis Reaction By A Reductive Addition-Oxidative Elimination Mechanism

  • Lerma-Berlanga, Belén|||0000-0003-3686-8576
  • Francesco
  • Leyva Perez, Antonio|||0000-0003-1063-5811
  • Merino, Estibaliz
[EN] A plethora of industrial and academic organic chemical reactions are catalyzed by the well-known oxidative addition-reductive elimination (OARE) mechanism. However, the micro-reversed counterpart, i. e. the reductive addition-oxidative elimination (RAOE) mechanism, has to our knowledge not been reported yet in a catalytic manner. Here we show that a gold cluster can act as homogeneous catalyst capable of triggering a reductive addition step with disulfides, manage the incoming electrons and finally execute an oxidative elimination step, to perform the disulfide metathesis reaction. These findings suggest that not only new organic reactions but also other previously reported processes catalyzed by metal clusters may operate through the RAOE mechanism.; Well-defined gold clusters are able to manage a reductive addition-oxidative elimination mechanism (the reverse of the typical redox mechanism) and catalyze the disulfide metathesis reaction with exceptional catalytic activity, and reusability. image, We thank the Ministerio de Ciencia e Innovacion Spain (MICIIN), for grant numbers PID2020-115100GB-I00, Severo Ochoa program CEX2021-001230-S, TED2021-130465B-I00 and CNS2022-135304. B. L.-B. thanks the Spanish Government (JDC2022-048323-I) and University of Valencia for a Margarita Salas contract (MS21-127). F. O. thanks ITQ, UPV-CSIC for the concession of a contract. E. M. thanks the Comunidad de Madrid Research Talent Attraction Program (grant ref. 2018-T1/IND-10054 and 2022-5A/IND-24227). We also thank Prof. Ruiz-Gonzalez and Prof. Gonzalez-Calbet from the Universidad Complutense of Madrid for performing the microscopy study. Computational resources for the DFT calculations were provided by the HERMES Cluster at the University of Zaragoza and CESGA provided by Galicia Supercomputing Center (QH-2023-2-0005).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Mizoroki¿Heck Macrocyclization Reactions at 1 M Concentration Catalyzed by Sub-nanometric Palladium Clusters

  • Garnes-Portoles, Francisco
  • Leyva Perez, Antonio|||0000-0003-1063-5811
  • Merino Marcos, Estibaliz
[EN] The synthesis of cyclized organic compounds with more than ten atoms (macrocycles) is traditionally based on reversible reactions under highly diluted conditions, typically <0.05¿M, in order to circumvent the formation of intermolecular products. These reaction conditions severely hamper industrial productivity and the use of solid catalysts. Herein, it is shown that the intramolecular Mizoroki-Heck reaction of ¿-iodide cinnamates proceeds at 1¿M concentration when catalyzed by few-atom Pd clusters, either in solution or supported on a solid, to give different macrocycles in good yields. This paradigmatic increase in reaction concentration not only opens the door for macrocycle production with high throughputs but also enables the use of solid catalysts for a macrocyclization reaction in flow., This work is part of the project PID2020-115100GB I00 funded by MCIN/AEI/10.13039/501100011033MICIIN (Spain). Financial support by Severo Ochoa center of excellence program (CEX2021-001230-S) and Comunidad de Madrid Research Talent Attraction Program (2018-T1/IND-10054 to E.M.) is gratefully acknowledged. F.G.-P. thanks ITQ, UPV-CSIC for a contract (PAID 01-18).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optimizing Reflux Synthesis Method of Mo-V-Te-Nb mixed oxide Catalysts for Light Alkane Selective Oxidation

  • Massó Ramírez, Amada
  • Ivars-Barceló, Francisco
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] The investigation here presented studies the effect of the synthesis temperature (from 80 to 110 degrees C) and the time (from 1 to 4 days) employed to precipitate catalyst precursors by reflux method, on the physic-chemical and the catalytic properties of the resulting Mo-V-Te-Nb mixed oxide catalysts for both propane partial oxidation into acrylic acid and ethane oxidative dehydrogenation (ODH) to ethylene. The insight obtained has allowed an important optimization of the not commonly used reflux method to prepare Mo-V-Te-Nb oxide materials with competitive catalytic performance. The yields achieved overcome those from optimized catalysts prepared by conventional hydrothermal method, and approach those reached with catalysts prepared using the "slurry method". The optimum rise for the synthesis temperature is found as a key factor for the reflux method. It allows access to an increased vanadium content into the reflux precipitate, which favors the formation of a pseudo-amorphous Mo-V-Te-Nb oxometallate. This precipitate behaves as a precursor for the crystallization, during the solid-state activation step at high-temperature (600 degrees C/N-2), of the structure type (TeO)(2)M20O56 (M = Mo, V, Nb), key for the selective conversion of propane or ethane. On the other hand, for the optimum temperature of synthesis, i.e. 110 degrees C, higher synthesis time of the precursor leads to smaller crystal sizes in the final catalyst (higher specific surface areas) and lowers the average oxidation state of vanadium from V+5 to V+4, which significantly enhances the catalytic behavior., Authors gratefully acknowledge the funds from DGICYT (Spain) by the project RTI2018-099668-B-C21, as well as the funds from Comunidad de Madrid by the project 2017-T1/IND-6025 within the program "Atraccion y Retencion de Talento Investigador" of the V PRICIT.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fast biofoundries: coping with the challenges of biomanufacturing

  • Tellechea-Luzardo, Jonathan Alexander
  • Otero-Muras, Irene
  • Goñi-Moreno, Angel
  • Carbonell, Pablo|||0000-0002-0993-5625
[EN] Biofoundries are highly automated facilities that enable the rapid and efficient design, build, test, and learn cycle of biomanufacturing and engineering biology, which is applicable to both research and industrial production. However, developing a biofoundry platform can be expensive and time consuming. A biofoundry should grow organically, starting from a basic platform but with a vision for automation, equipment interoperability, and efficiency. By thinking about strategies early in the process through process planning, simulation, and optimization, bottlenecks can be identified and resolved. Here, we provide a survey of technological solutions in biofoundries and their advantages and limitations. We explore possible pathways towards the creation of a functional, early-phase biofoundry, and strategies towards long-term sustainability., The authors thank Dr Rosalind Le Feuvre, Manchester SYNBIOCHEMCentre, for providing insightful discussions. J.T.-L. was supported by the Next Generation EU (NGEU) fund through the Spanish Recovery, Transformation and Resilience Plan via a Margarita Salas personal grant from the Spanish Ministry of Universities (UNI/551/2021). I.O.-M. was supported by CSIC intramural project PIE 20211CT006. A.G.-M. was supported by the grants BioSinT-CM (Y2020/TCS-6555) and CONTEXT (Atraccion de Talento Program; 2019-T1/BIO-14053) Projects of the Comunidad de Madrid, MULTI-SYSBIO (PID2020-117205GA-I00), and the Severo Ochoa Program for Centres of Excellence in R&D (SEV-2016-0672) (2017-2021) from MCIN/Agencia Estatal de Investigacion of Spain. P.C. was supported by MCIN/AEI/10.13039/501100011033 BIODYNAMICS grant number PID2020-117271RB-C21, and Universitat Politecnica de Valencia Talento Programme.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Unveiling Spin Transition at Single-Particle Level in Levitating Spin Crossover Nanoparticles

  • Pinilla-Cienfuegos, Elena|||0000-0002-3734-0821
  • Lucas
  • Torres-Cavanillas, Ramon
  • Echavarria, J. Ignacio
  • Regueiro, Alejandro
  • Coronado, Eugenio
  • Hernandez-Rueda, Javier
[EN] The ability to control and understand phase transitions of individual nanoscale building blocks is key to advancing the next generation of low-power reconfigurable nanophotonic devices. To address this critical challenge, molecular nanoparticles (NPs) exhibiting spin crossover (SCO) phenomenon are trapped by coupling a quadrupole Paul trap to a multispectral polarization-resolved scattering microscope. This contact-free platform simultaneously confines, optically excites, and monitors the spin transition in Fe(II)-triazole NPs in a pressure-tunable environment, eliminating substrate artifacts. Thus, we demonstrate light-driven manipulation of the spin transition in levitating NPs, enabled by laser heating and free of substrate-induced effects. Using the robust spin bistability near room temperature of our SCO system, we quantify reversible optovolumetric changes of up to 10%, revealing precise switching thresholds at the single-particle level. Independent pressure modulation produces a comparable volume increase, confirming mechanical control over the same bistable transition. These results constitute full real-time control and readout of spin states in levitating SCO NPs, with operating conditions compatible with ultralow-power optical switching, data storage, and nanoscale sensing., E.P.-C. acknowledges funding from Generalitat Valenciana (Grant No. SEJIGENT/2021/039) and Agencia Estatal de Investigacio&#769;n of Ministerio de Ciencia e Innovacio&#769;n (PID2021-128442NA-I00 and CNS2024-154922, funded by MICIU/AEI/10.13039/501100011033). J.H.-R. acknowledges funding from the Programa de Atraccion&#769; de Talento de la Comunidad Autonoma &#769; de Madrid, Modalidad 1 (Project 2020-T1/IND-19951). The authors acknowledge funding from the European Commission (Pathfinder-4D-NMR 101099676), the Spanish Ministerio de Ciencia e Innovacion&#769; (Unit of Excellence Maria de Maeztu grant CEX2024- 001467-M, PID2023-149309OB-I00, and PID2020- 117264GB-I00, funded by MICIU/AEI/10.13039/ 501100011033). This study forms part of the Advanced Materials program and was supported by MCIU with funding from the European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana (MFA/2022/050 and MFA/ 2022/025). E.C. acknowledges Generalitat Valenciana (PROMETEO Program CIPROM/2024/51) and the European Union NextGenerationEU (Catedras &#769; PERTE Chip Program TSI-069100-2023-0012).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

High thermoelectric performance in Bi2-xPbxBa2Co2Oy promoted by directional growth and annealing

  • Madre, M.A.
  • Costa, F.M.
  • Ferreira, N.M.
  • Costa, S.I.R.
  • Rasekh, S.
  • Torres, M.A.
  • Diez, J.C.
  • Amaral, V.S.
  • Amaral, J.S.
  • Sotelo, A.
Bi2-xPbxBa2Co2Oy (x=0.0, 0.2, 0.4, and 0.6) misfit compounds were grown by the laser floating zone technique. Microstructural analysis has shown the formation of thermoelectric grains together with high amount of secondary phases. Thermoelectric grains orientation is increased until 0.4Pb, while further substitution drastically destroys the preferential grain orientation. Electrical resistivity is very low compared with the values obtained in sintered materials, spectacularly increasing power factor. Moreover, the performance of these materials was further improved subjecting the as-grown samples to a postannealing step due to the rise of thermoelectric phase content. These microstructural modifications led to a high decrease of electrical resistivity, improving power factor in around a factor two at room temperature, compared with the as-grown samples. Moreover, the low thermal conductivity of the textured annealed samples leads to a maximum estimated ZT value of 0.53 for the 0.2 Pb-doped samples, much higher than the reported in literature.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Vortex pinning by intrinsic correlated defects in Fe1-ySe

  • Amigó, M.L.
  • Crivillero, V.A.
  • Franco, D.G.
  • Badía-Majós, A.
  • Guimpel, J.
  • Nieva, G.
We present a study on the transport and magnetic properties of superconducting Fe1-ySe single crystals. In the superconducting state, the in-plane electrical resistivity of the crystal is measured for fields up to 16 T and as a function of field direction, in order to understand how the vortex dynamics is affected by the presence of defects. A strong deviation from the slightly anisotropic crystal (electronic anisotropy constant 7 ~ 1.08) is observed as a steep angular dependence, which is interpreted as a signature of the presence of correlated defects. The influence of the correlated defects on the critical current is studied through the angular dependence of the magnetization, and compared to numerical simulations.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Effect of ball milling and fatty acid addition on the properties of MgB2 wires

  • Laliena, C.
  • Martinez, E.
  • Angurel, L.A.
  • Navarro, R.
Improved inductive critical current density Jc, at medium and high magnetic fields B, has been obtained in MgB2 wires made from ball-milled and carbon-doped precursors. The analyzed Fe-sheathed monofilamentary wires have been manufactured by the powder-in-tube and in-situ methods. Carbon doping has been achieved by the addition of fatty acids, in particular oleic acid (C18H34O2). In order to enhance the Jc(B) performance and the homogeneity of the wires, we have analyzed the combined effects of ball milling and oleic acid addition. The changes in the microstructure, phase composition, and superconducting properties for different milling parameters and the fixed amount of acid addition have been analyzed.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Thermoelectric doping effect in Ca3Co4-xNixO9 ceramics

  • Constantinescu, G.
  • Rasekh, S.
  • Torres, M.A.
  • Bosque, P.
  • Madre, M.A.
  • Sotelo, A.
  • Diez, J.C.
Ca3Co4-xNixO9 (x=0.01, 0.03, and 0.05) polycrystalline thermoelectric ceramics have been prepared by the classical solid state method. As a result of the Ni addition an increase in porosity has been detected. Moreover, the presence of Ni has been related with the increase of Ca2Co3O6 secondary phase and the appearance of a new NiO-CoO solid solution. However, for the 0.01-Ni doped samples an improvement in the thermoelectric performances has been measured. This effect has been related with a decrease in the resistivity values and an increase in the Seebeck coefficient. The raise in the power factor for the 0.01-Ni doped samples, compared with the undoped ones, is between 10 and 25% at 50 and 800 °C respectively. Moreover, the maximum power at 800 °C, around 0.25 mW/K2.m, is significantly higher than the best results obtained in Ni doped samples reported previously in the literature.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Thermoelectrics

  • Madre, M.A.
  • Rasekh, S.
  • Torres, M.A.
  • Diez, J.C.
  • Sotelo, A.
Metallic Ag microsphere in a ceramic matrix Thermoelectricity is the direct solid-state conversion between thermal and electrical energy, without any moving parts, due to the well-known Seebeck effect. Currently, more than half of the energy produced ends up in the form of wasted heat: thermoelectric harvesting and energy conversion constitutes an solution to improve the energy efficiency of classical industrial and domestic energy transforming processes, through thermoelectric modules.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Effect of Na substitution on superconducting properties of Bi-2212 ceramics prepared by Sinter-Forged process

  • Nane, O.
  • Özçelik, B.
  • Sotelo, A.
  • Madre, M. A.
Bulk textured Bi2Sr2Ca1-xNaxCu2Oy (x = 0.0, 0.05, 0.075 0.1, 0.15, and 0.20) ceramics have been prepared by a polymer solution method followed by sinter-forging process. The microstructure and superconducting properties of textured samples were affected by Na substitution. According to XRD data, all samples show that Bi-2212 phase is the major one, and main peaks corresponded to the (00l) diffractions confirming that the crystallographic c-axis is perpendicular to the surface. SEM micrographs showed that samples are composed of well-stacked and oriented grains. The best critical temperature, TC, was measured as 85.6 K for x = 0.075. The critical current density Jc, values decrease gradually with the increase of applied magnetic field. The maximum calculated Jc was 1.38 × 105 A/cm2 at 10 K for 0.075 Na sample which is about four times higher than the 0.34 × 105 A/cm2 value determined for the pure sample. The anisotropic properties of these textured materials have been investigated using magnetic measurements.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Effect of Ag additions on the Bi1.6Pb0.4Sr2Co1.8Ox thermoelectric properties

  • Diez, J.C.
  • Rasekh, Sh.
  • Constantinescu, G.
  • Torres, M.A.
  • Madre, M.A.
  • Sotelo, A.
Bi1.6Pb0.4Sr2Co1.8Ox thermoelectric ceramics with small Ag additions (0, 1, and 3 wt.%) have been successfully produced by a sol-gel method via nitrates. Microstructure has shown a reduction on the amount of secondary phases and an increase on the bulk density with increasing Ag contents. The microstructural evolution, as a function of Ag content, is confirmed with the electrical resistivity values which show an important decrease for the 3 wt.% Ag samples, leading to maximum power factor values of about 0.025 mW/K2.m at room temperature, which is about two times higher than the obtained for the Ag-free sintered samples. Se han preparado cerámicas termoeléctricas de composición Bi1.6Pb0.4Sr2Co1.8Ox con pequeñas adiciones de Ag (0, 1, y 3 % en peso) por medio de un método sol-gel a partir de los nitratos metálicos. La microestructura ha mostrado una reducción de la cantidad de fases secundarias y un aumento de la densidad del material al aumentar la cantidad de Ag. La evolución microestructural, en función del contenido de Ag, se ha confirmado con los valores de la resistividad eléctrica que muestra una reducción importante para las muestras con 3 % en peso de Ag, lo que lleva a alcanzar valores máximos del factor de potencia de alrededor de 0.025 mW/K2.m a temperatura ambiente, que es dos veces mayor que el obtenido para muestras sinterizadas sin Ag
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Long-term high-temperature stability of directionally grown [Bi2Ba2O4]p[CoO2] rods

  • Diez, J.C.
  • Madre, M.A.
  • Torres, M.A.
  • Rasekh, S.
  • Sotelo, A.
[Bi2Ba2O4]p[CoO2] thermoelectric ceramics have been successfully grown from the melt using the laser floating zone method, followed by a thermal treatment at 700°C under air between 0 and 1532 h. The microstructural, thermoelectric, and mechanical properties were evaluated as a function of the thermal treatment length. Microstructure has shown that as-grown samples are composed of thermoelectric grains, together with a relatively high amount of secondary phases. Thermal treatment decreased the number and amount of secondary phases, producing nearly single-phase samples after 384 h. Consequently, the thermoelectric properties evaluated through the power factor showed a slight increase with the thermal treatment length, mainly due to the decrease of electrical resistivity, while the Seebeck coefficient was nearly unchanged. On the other hand, flexural strength was practically constant after 24 h thermal treatment.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

High thermoelectric performances of Bi–AE–Co–O compounds directionally growth from the melt; [Altas prestaciones termoeléctricas en compuestos Bi-AE-Co-O crecidos direccionalmente desde el fundido]

  • Diez, J.C.
  • Rasekh, S.
  • Madre, M.A.
  • Torres, M.A.
  • Sotelo, A.E.
Bi2AE2Co2Ox (AE = Ca, Sr, and Ba) thermoelectric compounds were grown from the melt by the laser floating zone technique. Microstructural analysis of as-grown samples has shown the formation of well-aligned thermoelectric grains together with a relative high amount of secondary phases. On the other hand, a short (24 h) thermal treatment (810 °C for Sr, 800 °C for Ca, and 750 °C for Ba) under air, raises of thermoelectric phase content through the recombination of the secondary ones. These microstructural modifications led to a large decrease of electrical resistivity, improving the power factor. These results have been compared with samples prepared by the conventional solid state method and with the best values reported in the literature. From these data, it is possible to deduce that the high thermoelectric characteristics obtained in these samples make them very attractive for practical applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Combined experimental and computational characterization of crosslinked collagen-based hydrogels

  • Valero, C.
  • Amaveda, H.
  • Mora, M.
  • García-Aznar, J.M.
Collagen hydrogels are widely used for in-vitro experiments and tissue engineering applications. Their use has been extended due to their biocompatibility with cells and their capacity to mimic biological tissues; nevertheless their mechanical properties are not always optimal for these purposes. Hydrogels are formed by a network of polymer filaments embedded on an aqueous substrate and their mechanical properties are mainly defined by the filament network architecture and the individual filament properties. To increase properties of native collagen, such as stiffness or strain-stiffening, these networks can be modified by adding crosslinking agents that alter the network architecture, increasing the unions between filaments. In this work, we have investigated the effect of one crosslinking agent, transglutaminase, in collagen hydrogels with varying collagen concentration. We have observed a linear dependency of the gel rigidity on the collagen concentration. Moreover, the addition of transglutaminase has induced an earlier strain-stiffening of the collagen gels. In addition, to better understand the mechanical implications of collagen concentration and crosslinkers inclusion, we have adapted an existing computational model, based on the worm-like chain model (WLC), to reproduce the mechanical behavior of the collagen gels. With this model we can estimate the parameters of the biopolymer networks without more sophisticated techniques, such as image processing or network reconstruction, or, inversely, predict the mechanical properties of a defined collagen network.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Improved thermoelectric performances in textured Bi1.6Pb0.4Ba2Co2Oy/Ag composites

  • Sotelo, A.
  • Rasekh, S.
  • Torres, M. A.
  • Bosque, P.
  • Madre, M. A.
  • Diez, J. C.
Bi1.6Pb0.4Ba2Co2Oy thermoelectric ceramics with small Ag additions (0, 1, 3, and 5 wt%) have been textured using the laser floating zone method. Microstructure has shown a slight decrease on the secondary phases content and a better grain alignment in Ag added samples. These microstructural features are reflected in the thermoelectric properties, which have shown a significant decrease of electrical resistivity, when the Ag content is raised. In spite of a corresponding decrease of Seebeck coefficient, all the Ag-containing samples possess higher Power Factor values than the Bi1.6Pb0.4Ba2Co2Oy ones. Moreover, the maximum Power Factor values (about 0.36 mW/K2.m at 650 °C) have been measured in Bi1.6Pb0.4Ba2Co2Oy+3 wt% Ag samples, which are the best results reported in this family of materials.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Improving bulk Ca3Co4O9 thermoelectric materials through Zr doping

  • Madre, M.A.
  • Rasekh, S.
  • Torres, M.A.
  • Diez, J.C.
  • Sotelo, A.
Ca3Co4-xZrxOy polycrystalline ceramics with small Zr substitution have been prepared through the classical solid-state method. X-ray diffraction data have shown that all samples are composed only of Ca3Co4O9 and Ca3Co2O6 phases. Moreover, by increasing Zr substitution up to 0.07, Ca3Co2O6 phase content is decreased. Density measurements have revealed that all samples are very similar, with values around 74% of the theoretical density. Electrical resistivity is decreased in Zr-doped samples, with respect to the pure samples, while Seebeck coefficient is unchanged. Both factors lead to power factor values around 0.33 mW K-2 m-1 at 800°C in 0.07 Zr-doped samples, which are about 65% higher than those obtained for the undoped samples.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Effect of Yttrium substitution on superconductivity in Bi-2212 textured rods prepared by a LFZ technique

  • Ozcelik, B.
  • Nane, O.
  • Sotelo, A.
  • Madre, M.A.
In this study, the physical and superconducting properties of the Bi2Sr2Ca1-xYxCu2O8+delta with x=0.0, 0.05, 0.075 0.1, and 0.20 textured superconducting rods prepared by a laser floating zone technique were presented. The effects of Y3+ substitution for Ca2+ have been investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), dc-magnetization, magnetic hysteresis and critical current density calculation by using the Bean''s critical state model. The powder XRD patterns of the samples have shown the Bi-2212 phase is the major one. Along with the powder samples, the textured rod surfaces also were investigated by XRD. The grains found to be well-oriented along the longitudinal rod axis which is a typical result for superconductors prepared by laser floating zone (LFZ) method, has been observed. The best critical temperature, T-C, has been found as 92.9 K for the sample with 0.15Y substitution, under DC magnetic field of 50 Oe in ZFC mode. It has also been observed that the critical current density decreases with increasing Y-substitution. Using those values, the maximum J(C) value has been determined as 2.37 x 10(5) A/cm(2) for the undoped sample.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Dendritic flux avalanches in a superconducting MgB2 tape

  • Qureishy, T.
  • Laliena, Carlos
  • Martínez, Elena
  • Qviller, A.J.
  • Vestgården, J.I.
  • Johansen, T.H.
  • Navarro, Rafael
  • Mikheenko, P.
Tapes of MgB2 with high critical current have a significant technological potential, but can experience operational breakdown due to thermomagnetic instabilities. Such events are routinely registered by magnetisation measurements, but were never observed by direct imaging techniques. Here we report magneto-optical imaging visualisation of a tape with reduced thickness and enhanced critical current density. The spatial structure of the thermomagnetic avalanche events was resolved, and the reproducibility and nucleation thresholds were determined. Avalanches appearing at low fields are small intrusions at the tape edges, while larger fields create more extensive avalanches having dendritic structures similar to those observed in thin-film superconductors. In contrast to dendritic avalanches in thin films, the avalanches in the tapes show reproducibility to a larger extent.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Microstructural characterization and tribological behavior of Laser Furnace processed ceramic tiles

  • Rey-García, F.
  • Gutiérrez-Mora, F.
  • Borrel, C.J.
  • Estepa, L.C.
  • Angurel, L.A.
  • De La Fuente, G.F.
This paper presents, for the first time, the processing of commercial ceramic tiles by means of Laser Furnace (LF) technology and its influence on their microstructure and tribology. Commercial porcelain and white clay, partially fired ceramic tiles, were processed by this method in order to study the effect of the laser treatment and its potential to produce ceramic items on a large scale, under extreme surface temperature conditions. The microstructure and depth of the laser irradiated ceramic samples were studied by FESEM. EDX analyses were employed to study composition before and after the laser treatment. Surface roughness was determined using Confocal Microscopy, while hardness and tribological behavior were studied using Vickers indentations and a ball-on-flat apparatus, respectively.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Effect of simultaneous K, and Yb substitution for Ca on the microstructural and thermoelectric characteristics of CaMnO3 ceramics

  • Sotelo, A.
  • Depriester, M.
  • Torres, M.A.
  • Sahraoui, A.H.
  • Madre, M.A.
  • Diez, J.C.
CaMnO3-based materials are very attractive among n-type thermoelectric oxides for high-temperature applications when they are appropriately doped. The main drawback of these materials is the cost associated to the necessary rare earth cations. This work aims decreasing the amount of these materials through a partial substitution of Ca2+ by an equimolar mixture of K+ and Yb3+, Ca1-x(K0.5Yb0.5)xMnO3, with x = 0.05, 0.10, 0.15, and 0.20. XRD studies have confirmed that the thermoelectric phase is the major one in all samples. Microstructure has shown the formation of large crystals, and an increasing porosity when the substitution is raised. This evolution has been confirmed through density measurements. Electrical resistivity has been drastically decreased for the 0.10 substituted samples, compared with the 0.05 ones, slightly increasing for higher substitution. On the other hand, absolute Seebeck coefficient and thermal conductivity are lower when the substitution is raised. The best ZT values have been achieved for the 0.10 substituted samples, which are around the typical reported in the literature for higher doping level. These results clearly point out to a decrease of the necessary rare earth dopant content to achieve similar performances in CaMnO3 ceramics, which is of the main economic significance for their industrial production.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Continuous processing of Bi2Sr2CaCu2O8+d precursor powders

  • Laliena, C.
  • Amaveda, H.
  • Özçelik, B.
  • Martínez, E.
  • de la Fuente, G.F.
  • Angurel, L.A.
A continuous solid-state process inside a roller furnace has been used to fabricate Bi-2212 powders. These powders were synthesized for their use as precursors to obtain textured monoliths by laser induced directional solidification. A thermal cycle has been defined, which depends on the length of the furnace, the prefixed temperature profile and the velocity of the sample inside the furnace. Powder properties have been studied as a function of the number of processing cycles. Phase evolution has been analyzed using X-ray diffraction, while other relevant properties of the powders, including grain size distribution, thermal behavior and temperature dependence of the AC susceptibility, have also been measured. These properties have been compared with those of commercial powders and precursors prepared using a standard solid-state protocol. Textured samples using these continuous solid-state precursors exhibit superconducting properties comparable to those similarly processed but prepared from commercial powders.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Enhanced electrical and thermoelectric properties from textured Bi1.6Pb0.4Ba2Co2Oy/Ag composites

  • Madre, M. A.
  • Rasekh, Sh.
  • Torres, M. A.
  • Bosque, P.
  • Diez, J. C.
  • Sotelo, A.
Bi1.6Pb0.4Ba2Co2Oy/3 wt% Ag composites have been textured using the laser floating zone technique. Microstructural observations have shown the formation of relatively high amounts of secondary phases and cracks along the plate-like grains in the as-grown materials. In spite of these microstructural features, electrical properties have not been drastically decreased. Annealing of these as-grown rods has enhanced the grains connectivity, decreased the contents of the secondary phases, and healed the cracks, thereby increasing their electrical performances. It has been deduced that oxygen content in the thermoelectric phase has not been significantly modified through annealing, as demonstrated by the very similar Seebeck values at room temperature in the as-grown and annealed samples. As a consequence of the low electrical resistivity values in the annealed materials, they reached higher power factor values than the as-grown ones. The highest power factor at room temperature is in the range of those reported for single crystals, while at 650 °C, it is the highest reported in Bi–Ba–Co–O polycrystalline family so far.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

From nanosized precursors to high performance ceramics: the case of Bi2Ca2Co1.7Ox

  • Madre, M. A.
  • Rasekh, Sh.
  • Touati, K.
  • Salvador, C.
  • Depriester, M.
  • Torres, M. A.
  • Bosque, P.
  • Diez, J. C.
  • Sotelo, A.
Bi2Ca2Co1.7Ox thermoelectric ceramics were prepared by four different synthesis routes: coprecipitation with ammonium carbonate or oxalic acid, attrition milling, and solid state (as reference). Microstructure showed that coprecipitation and attrition milling produced sintered materials with less porosity and smaller particle sizes than the solid state ones. Thermoelectric properties reflect the microstructure, leading to materials with lower electrical resistivity and higher Seebeck coefficient, when compared with the solid state ones. In spite of an increase in thermal conductivity in these samples due to their lower porosity, the maximum estimated Figure-of-Merit is higher than in sintered materials.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Effect of Na substitution and Ag addition on the superconducting properties of Bi-2212 textured materials

  • Özçelik, B.
  • Nane, O.
  • Sotelo, A.
  • Amaveda, H.
  • Madre, M. A.
The effect of Ag addition on the structural and superconducting properties of Bi2Sr2Ca0.925Na0.075Cu2Oy + x wt% Ag materials with x = 0, 1, 3, and 5 prepared by sol–gel method, followed by directional growth using the laser floating zone (LFZ) technique has been investigated. Powder XRD measurements demonstrate that all samples are composed by nearly single Bi-2212 phase. SEM micrographs and EDX results confirms that Bi-2212 is the major phase with minor amounts of a Bi-free one (Sr, Ca)CuO2 and metallic Ag. According to the magnetic results, Ag does not modify the superconducting critical temperature, Tc, but significantly increases the magnetic hysteresis loop area. The magnetic critical current density is maximum in the 3 wt% Ag containing samples, due to the larger grain clusters found in these samples, reaching 2.1 × 105 A/cm2 at 10 K. Moreover, Ag addition also improves the rods mechanical properties, determined by three point bending tests. The highest bending stress is also reached in the 3 wt% Ag samples.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Experimental and numerical analysis of quench propagation on MgB 2 tapes and pancake coils

  • Pelegrín,J.
  • Romano,G.
  • Martínez,E.
  • Angurel,L. A.
  • Navarro,R.
  • Ferdeghini,C.
  • Brisigotti,S.
  • Grasso,G.
  • Nardelli,D.
In the design and feasibility of electric power applications with MgB2 conductors, thermal conductivity plays an important role. In composite wires and tapes it is mainly determined by the amount of stabilizer (usually copper), while for coils the electric insulation and epoxy binder characteristics are added. In this paper we present results on quench development and propagation on isolated superconducting tapes and small single pancake coils cooled by thermal conduction, for three types of MgB2 tape with different stabilizations. The quench parameters at different temperatures, such as minimum quench energy (MQE), minimum propagation zone (MPZ) and quench propagation velocity (vp), are reported. A complete electrical and thermal characterization of the superconducting tapes and of non-superconducting materials used in the coil manufacture has been made. With these data, numerical computational models using finite element simulations have been performed for isolated wires and single pancake coils, and the results of the relevant quench parameters have been compared with the measured values.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Effect of ball milling on the local magnetic flux distribution and microstructure of in situ Fe/MgB2 conductors

  • Laliena, C.
  • Qureishy, T.
  • Martínez, E.
  • Navarro, R.
  • Mikheenko, P.
  • Johansen, T.H.
  • Kovác, P.
The effects of the precursor milling energy on the superconducting and microstructural homogeneity of Fe-sheathed MgB2 monocore wires and tapes have been investigated. The conductors were produced by the powder-in-tube method using drawing and rolling deformation methods and in situ reaction. Combined magneto-optical, structural and magnetization measurements were performed on MgB2 superconducting tapes prepared from differently milled precursors revealing hidden mechanisms controlling their critical current density. Local degradation of the superconducting properties observed in some analysed conductors has been identified and correlated with microstructural observations.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Enhanced quench propagation in 2G-HTS coils co-wound with stainless steel or anodised aluminium tapes

  • Núñez-Chico, A. B.
  • Martínez, E.
  • Angurel, L. A.
  • Navarro, R.
Early quench detection and thermal stability of superconducting coils are of great relevance for practical applications. Magnets made with second generation high temperature superconducting (2G-HTS) tapes present low quench propagation velocities and therefore slow voltage development and high local temperature rises, which may cause irreversible damage. Since quench propagation depends on the anisotropy of the thermal conductivity, this may be used to achieve an improvement of the thermal stability and robustness of 2G-HTS coils. On pancake type coils, the thermal conductivity along the tapes (coil''s azimuthal direction) is mostly fixed by the 2G-HTS tape characteristics, so that the reduction of anisotropy relies on the improvement of the radial thermal conductivity, which depends on the used materials between superconducting tapes, as well as on the winding and impregnation processes. In this contribution, we have explored two possibilities for such anisotropy reduction: by using anodised aluminium or stainless steel tapes co-wound with the 2G-HTS tapes. For all the analysed coils, critical current distribution, minimum quench energy values and both tangential and radial quench propagation velocities at different temperatures and currents are reported and compared with the results of similar coils co-wound with polyimide (Kapton®) tapes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Composite Bi-2212/Ag Superconductors Grown by Laser Travelling Floating Zone at Low Rates

  • Diez, J.C.
  • Sotelo, A.
  • Rasekh, S.
  • Amaveda, H.
  • Torres, M.A.
  • Bosque, P.
  • Chocarro, C.
  • Madre, M.A.
Well-textured Bi2.02Sr2.02Ca0.98Cu1.99O x /2.9 wt % Ag composite samples have been grown by the laser floating zone at very low rates (1, 3, and 5 mm/h). The as-grown samples present superconducting behavior, as a result of being composed by long and well-textured Bi-2212 grains as major phase. After annealing, the samples do not dramatically increase their J C. This effect has been associated with the presence of long cracks along the ab planes of the superconducting grains. Even after annealing, the cracks have not been totally removed and, as a consequence, the critical current of the samples after the thermal treatment has only been improved in around 50 %, compared with the as-grown samples.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Decrease of electrical resistivity in Ca3Co4O9 thermoelectric ceramics by Ti doping

  • Torres, M.A.
  • Rasekh, Sh.
  • Bosque, P.
  • Constantinescu, G.
  • Madre, M.A.
  • Diez, J.C.
  • Sotelo, A.
Ca3Co4−xTixO9 polycrystalline thermoelectric ceramics with small amounts of Ti have been prepared by the classical solid state method. X-ray diffraction data have shown that Ca3Co4O9 is the major phase, with small amounts of the Ca3Co2O6 one. Moreover, they show that Ti has been incorporated into these two phases. Electrical resistivity decreases, compared with the values for undoped samples, until 0.03-Ti doped ones. Further Ti addition produces an increase of resistivity with respect to the 0.03 Ti doped samples. Seebeck coefficient does not appreciably change in all the measured temperature range, independently of Ti content. The improvement in electrical resistivity leads to about 55 % higher power factor values for the 0.03 Ti-doped samples than that obtained in the undoped ones. The maximum power factor at 800 °C, around 0.33 mW/K2 m, is slightly higher than the obtained in higher density samples, clearly indicating the good thermoelectric performances of these doped samples.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Effect of Sr substitution for Ca on the Ca3Co4O 9 thermoelectric properties

  • Constantinescu, G.
  • Rasekh, Sh.
  • Torres, M.A.
  • Diez, J.C.
  • Madre, M.A.
  • Sotelo, A.
Ca3−xSrxCo4O9 polycrystalline thermoelectric ceramics with small amounts of Sr have been synthesized by the classical solid state method. Microstructural characterizations have shown that all the Sr has been incorporated into the Ca3Co4O9 and Ca3Co2O6 structures and no Sr-based secondary phases have been produced. Apparent density measurements have shown that samples slightly increase their density until 0.05 Sr content, decreasing for higher contents. Electrical resistivity decreases and Seebeck coefficient slightly raises when Sr content increases until 0.07 Sr addition. The improvement in both parameters leads to higher power factor values than the usually obtained in samples prepared by the conventional solid state routes and close to those obtained in textured materials.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Use of laser technology to produce high thermoelectric performances in Bi2Sr2Co1.8Ox

  • Rasekh, S.
  • Costa, F.M.
  • Ferreira, N.M.
  • Torres, M.A.
  • Madre, M.A.
  • Diez, J.C.
  • Sotelo, A.
Bi2Sr2Co1.8Ox bulk polycrystalline ceramics were prepared by conventional sintering of powders, obtained by polymer solution method and by directional growth using the laser floating zone technique. Microstructural analysis showed randomly oriented grains in the classical sintered materials, while in the laser-textured samples well oriented crystals with the c-axis nearly perpendicular to the growth direction were observed. A significant reduction on electrical resistivity, compared with the sintered materials, was observed due to the decrease on the secondary phases content. As a consequence, a raise on the power factor of about 2 and 5 times, compared with the classically sintered samples, was obtained for the as-grown and annealed laser-textured samples, respectively. The maximum power factor obtained at 650 °C in the annealed laser-textured samples (∼0.20 mW/K2 m) is much higher than the best value obtained in sinter–forged textured materials at the same temperature.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Effect of Secondary Annealing Process on Critical Current Density in Highly Textured Bi-2212 Superconducting System

  • Aksan, M. A.
  • Madre, M. A.
  • Rasekh, S.
  • Constantinescu, G.
  • Torres, M. A.
  • Diez, J. C.
  • Sotelo, A.
  • Yakinci, M. E.
Bi-2212 samples prepared by a solid-state reaction technique have been grown from the melt using the laser floating zone method. After annealing the as-grown bars, the samples showed a good grain alignment and a high transport critical current density. Secondary annealing processes were performed on the annealed samples with the aim of producing Bi-2212 phase controlled decomposition. Hence, the Bi-2201 phase and the secondary phases, which act as effective pinning centers, were obtained with the secondary annealing process. After these thermal treatments, the transport critical current densities of samples significantly increased, when compared to the annealed ones. The maximum critical current density was achieved when the samples were subjected to secondary annealing at 680°C for 168 h with an improvement of ~80%, compared to the annealed ones. Moreover, it was found that magnetization of the secondarily annealed samples was also increased. The magnetic critical current densities in these secondary annealed samples were about 3 times higher than the values obtained for the annealed ones. These results clearly indicate that the secondary annealing processes lead to the formation of effective pinning centers in the bulk material.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Effect of current polarity on BSCCO/Ag ceramics textured by electrically assisted laser floating zone

  • Costa, F.M.
  • Rasekh, S.
  • Ferreira, N.M.
  • Sotelo, A.
  • Diez, J.C.
  • Madre, M.A.
Bi-2212/Ag superconducting ceramics were grown using the electrically assisted laser floating zone (EALFZ) technique. The main goal was improving the superconducting properties by applying an electrical current through the sample during the solidification process. The effect of a 100 mA current intensities in two configurations were studied: (i) direct current (connecting the seed rod to the positive pole and the feed to the negative one) and (ii) reverse current (positive pole connected to the feed rod and negative to the seed one). The resulting textured cylindrical bars were annealed in order to obtain the superconducting phases. A strong correlation between current polarity, grain alignment and superconducting properties was observed. The rods grown under direct current exhibit higher critical current density (∼3000 A/cm2) than the ones grown under conventional method (∼2300 A/cm2) or under reverse current condition (∼35 A/cm2). The superior value obtained for the direct current results from a better grain alignment and fewer amount of second phases.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Decrease of Ca3Co4O9+δthermal conductivity by Yb-doping

  • Kiirat, G.
  • Aksan, M.A.
  • Rasekh, Sh.
  • Madre, M.A.
  • Diez, J.C.
  • Sotelo, A.
In this study, the effect of Yb-substitution on the structural, electrical and thermal transport properties of the Ca 3Co 4O 9 þ δ system has been investigated in the low temperature region (between 10 and 300 K). The resistivity of samples increases with raising the Yb-concentration in the system. All the samples show a metal-semiconductor transition below 85 K. In the analysis based on Strongly Correlated Fermi Liquid Model, an increased bandwidth and a reduced electronic correlation are found. It has also been found that the energy gap, E0, value also decreases with Yb substitution. The samples show positive thermoelectric power, indicating that dominant charge carriers are holes in all the samples. The thermoelectric power value decreases with Yb-substitution. From Mott equation, it is determined that the Fermi energy and hole concentration decrease in the Yb-susbtituted samples, compared to the undoped ones. Thermal conductivity, κ, is decreased in about 50% of the measured in undoped samples for the 0.01 and 0.03 Yb-doped samples at 300 K. Highest figure of merit, ZT, value is found to be 5.4 10 3 at 300 K for the unsubstituted sample and the ZT value decreases by the substitution.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Development of a new thermoelectric Bi2Ca2Co 1.7Ox + Ca3Co4O9 composite

  • Rasekh, Sh.
  • Ferreira, N.M.
  • Costa, F.M.
  • Constantinescu, G.
  • Madre, M.A.
  • Torres, M.A.
  • Diez, J.C.
  • Sotelo, A.
Bi2Ca 2Co 1.7Ox nominal composition ceramic rods were textured by the electrically assisted laser floating zone technique. A new composite formed by three phases, two of them with well-known thermoelectric properties, Bi 2Ca2Co 1.7Ox and Ca 3Co 4O 9, was obtained for the first time when the growth process was performed with a 300 mA applied current. Under these conditions the thermoelectric performances of this new composite reach values above the highest ones reported in the literature for polycrystalline Bi 2Ca2Co 1.7Ox materials.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Effect of postannealing process on Bi2Sr2.1Ca 0.9Cu2O8+δ textured superconductors

  • Sotelo, A.
  • Madre, M.A.
  • Rasekh, S.
  • Constantinescu, G.
  • Torres, M.A.
  • Diez, J.C.
Bi-2212 samples prepared by the classical solid-state method have been grown from the melt using the Laser Floating Zone (LFZ) method. They have shown good grain alignment and transport critical current densities (J c ). After postannealing processes designed to produce the Bi-2212 phase controlled decomposition, J c values have been increased in an important manner. Maximum values have been achieved when samples were thermally treated at 680 °C for 168 h with improvements around 80 %, compared with the original textured samples. The results clearly indicate that postannealing processes, when adequately controlled, produce the formation of effective pinning centers which are responsible for the increase in the measured J c values.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Textured Pb-Doped Bi-2212 Superconductors for Current Limiters

  • Sotelo, A.
  • Rasekh, Sh.
  • Amaveda, H.
  • Bosque, P.
  • Torres, M.A.
  • Madre, M.A.
  • Diez, J.C.
Bi2−x Pb x Sr2CaCu2O y (x = 0.0, 0.3, 0.4, and 0.5) textured materials have been prepared by the laser floating zone technique. The E − I curves showed and increase of the slope of the normal to superconducting transition with Pb addition. The best values have been obtained for the 0.4 Pb-doped samples, around 16 at 77 K. In spite of this improvement, Pb addition decreased J C and T C in all cases. On the other hand, electrical characterization at lower temperatures has led to an impressive raise in the 0.4 Pb-doped samples, reaching n values around 31, and J C of about 3,000 A/cm 2, at 65 K. At the same time, the mechanical integrity of the vitreous precursor materials has been determined. All the obtained results clearly indicate that these precursors, when properly processed by the laser floating technique, are promising candidates for practical applications as current limiters.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Solution-based synthesis routes to thermoelectric Bi2Ca2Co1.7Ox

  • Sotelo, A.
  • Rasekh, S.
  • Madre, M.A.
  • Guilmeau, E.
  • Marinel, S.
  • Diez, J.C.
The synthesis of Bi2Ca2Co1.7Ox misfit compounds by different processing routes, i.e. classical solid-state, and two solution methods namely sol–gel via nitrates and a polymer route, has been investigated. A comparison among the final products has been performed using DTA, TGA, X-ray diffraction, scanning electron microscopy, and thermoelectric characterizations. All the samples obtained by solution synthesis show a very important increase in ZT, as compared to the solid state prepared samples, due to a significant decrease in the electrical resistivity values.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

New promising Co-free thermoelectric ceramic based on Ba-Fe-oxide

  • Constantinescu,G.
  • Diez,J. C.
  • Rasekh,Sh
  • Madre,M. A.
  • Torres,M. A.
  • Sotelo,A.
Thermoelectric ceramics are based in a limited number of transition metal oxides (Co, Mn, Ni,…) which produce materials with high thermoelectric performances. Based on previously existing thermoelectric phases, the phase diagram equilibrium can help to design new thermoelectric ceramics based on other transition metals (for example, Fe). In this work, BaFeOx ceramics have been prepared by the classical solid state method using different sintering temperatures. The produced materials have shown promising thermoelectric properties when treatment temperatures are in the perovskite zone domain of the phase equilibrium diagram. In spite of the good values for the Seebeck coefficients, power factor is low due to the high resistivities measured in all cases.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Improvement of thermoelectric properties of Bi2Sr2Co1.8Ox through solution synthetic methods

  • Torres, M.A.
  • Sotelo, A.
  • Rasekh, Sh.
  • Serrano, I.
  • Constantinescu, G.
  • Madre, M.A.
  • Diez, J.C.
Several solution synthetic methods, sol-gel and a polymeric route, have been studied in order to obtain Bi2Sr2Co1.8Ox ceramics with improved thermoelectric properties, compared to the classical solid state reaction. The products obtained by these different methods have been compared using DTA-TGA, powder X-ray diffraction, scanning electron microscopy, and thermoelectric characterizations. All the samples obtained by solution synthesis show higher homogeneity and lower content of secondary phases. The main differences in thermoelectrical properties are due to the decrease of electrical resistivity in samples obtained by solution methods, compared with the solid state obtained samples. Between them, the decrease is especially high for those samples prepared by the polymer solution method. Therefore, the polymeric solution synthesis route is shown to yield a power factor four times higher than the obtained for the solid state and sol-gel methods at room temperature.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Improvement of Bi2Sr2Co2Oy thermoelectric performances by Na doping

  • Çetin Karakaya, G.
  • Ozçelik, Bekir
  • Nane, O.
  • Sotelo, A.
  • Rasekh, Sh.
  • Torres, M.A.
  • Madre, M.A.
Bi2Sr2-xNaxCo2Oy thermoelectric materials with x = 0, 0.025, 0.05, 0.075, 0.10, 0.125, and 0.15 have been prepared by the classical solid state reaction. Microstructure has shown an important grain growth when Na is added, leading to very high bulk densities confirmed through density measurements. These modifications have produced a drastic decrease of electrical resistivity without significant modification of Seebeck coefficient. As a consequence, Power Factor has been increased in all Na-doped samples, reaching the maximum value (0.21 mW/K2.m at 650 °C) for 0.075 Na samples, which is fairly close to the reported for single crystals.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Influence of Ca substitution by Mg on the Ca3Co 4O9 performances

  • Constantinescu, G.
  • Rasekh, S.H.
  • Torres, M.A.
  • Chocarro, C.
  • Díez, J.C.
  • Madre, M.A.
  • Sotelo, A.
Ca3-x Mgx Co4 O 9 polycrystalline thermoelectric ceramics with small amounts of Mg have been synthesized by the classical solid state method. Microstructural characterizations have shown that all the Mg has been incorporated into the Ca 3 Co4 O 9 structure and no Mg-based secondary phases have been identified. Apparent density measurements have shown that samples do not modify their density until 0.05 Mg content, decreasing for higher contents. Electrical resistivity decreases and Seebeck coefficient slightly raises when Mg content increases until 0.05 Mg addition. The improvement in both parameters leads to higher power factor values than the usually obtained in samples prepared by the conventional solid state routes and close to those obtained in textured materials.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Enhancement of mechanical and thermoelectric properties of Ca3Co4O9 by Ag addition

  • Kahraman, F.
  • Madre, M. A.
  • Rasekh, S.
  • Salvador, C.
  • Bosque, P.
  • Torres, M. A.
  • Diez, J. C.
  • Sotelo, A.
Ca3Co4O9+x wt.% Ag (x=0, 1, 3, 5, and 10) polycrystalline thermoelectric ceramics have been prepared by a sol-gel route via nitrates followed by high temperature treatment before sintering. Out-of-plane XRD data have shown that major phase is the Ca3Co4O9 one, accompanied by metallic Ag. SEM observations have agreed with the XRD data. Apparent density measurements have revealed that all samples possess densities ranging between 80% and 90% when Ag content is raised. Mechanical properties have shown a drastic increase of bending stress when Ag is added to the samples. Electrical resistivity decreases with the Ag content, compared with the pure ones, while Seebeck coefficient slightly decreases. Maximum power factor values around 0.43mW/K2m at 800°C have been achieved for the 10wt.% Ag samples which is much higher than the measured in the pure Ca3Co4O9 samples.
Docta Complutense
Publicación Artículo científico (JournalArticle)

The lost road: do transportation networks imperil wildlife population persistence?

  • Barrientos Yuste, Rafael
  • Ascensão, Fernando
  • D'Amico, Marcello
  • Grilo, Clara
  • Pereira, Henrique M.
The global road network is rapidly growing associated with human economic development. This growth also entails a high toll for biodiversity, with several well-documented negative impacts on different species. However, there is still a great lack of knowledge about the effects of roads on the persistence of wildlife populations. Here, we aimed to summarize our current knowledge on this topic, based on systematic reviews. We found that only a small proportion of studies (8%) focused on the effects of roads on population persistence. Most of these studies were about large mammals and were performed in high-income countries. Furthermore, these works studied only 2% of those species identified by the IUCN Red List as threatened by roads. Overall, our results show that we are far from understanding how roads affect the long-term viability of wildlife populations inhabiting road-effect zones. Addressing this challenge will require modifying our conceptual perspective, from short-term to long-term studies, from single road sections to focusing the landscape scale, and strive to obtain empirical data to support sound analyses to assess how road impacts affect the survival of wildlife populations, namely with information required to perform approaches such as population viability analyses. We highlight some key studies from our reviews that have addressed this global conservation concern with population-oriented approaches.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Palaeoenvironmental Framing of the O Areal Roman Saltworks and Related Anthropogenic Activities in North-western Iberia

  • López Merino, Lourdes
  • Tallón-Armada, Rebeca
  • Costa-Casais, Manuela
  • Silva-Sánchez, Noemí
  • López-Sáez, José Antonio
  • Martínez Cortizas, Antonio
The NW Iberian city of Vigo contains buried structures of a Roman salinae that follow the ancient coastline. To investigate its environmental legacy, we studied two pedo-sedimentary profiles at the O Areal saltworks to reconstruct human activities during and after the salinae use, as well as framing them within the last two millennia of climate variability. The bottom layer consists of organic-rich sands, with marine palynomorphs, confined within the saltworks’ structures that operated during the Early Roman Empire, when the demand in fish-salted products increased and the salting industry fluorished on the Atlantic coast of Iberia. During the Late Roman Empire, salt production at the O Areal may have ended, coeval with the development of a marsh with hydro-hygrophyte vegetation and the salting industry demise. The Roman environment also experienced intense agropastoralism that triggered water eutrophication. After Roman times, a dune phase sealed the archaeologicl structures. The overall trend points to a shift from a marine to a terrestrial setting coeval to known periods of climate variability. Therefore, humans and climate impacted the coast during the last two millennia, including the very intense Roman-period saltworks, agriculture and livestock. Roman times climate would have also influenced the saltworks’ establishment and abandonment.
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Repetitive negative thinking processes account for gender differences in depression and anxiety during adolescence

  • Espinosa García, Fabiola
  • Martín Romero, Nuria|||0000-0003-3366-8886
  • Sánchez López, Alvaro
Rumination and worry are vulnerability factors involved in the early development of depression and anxiety during adolescence, particularly in girls. Current views conceptualize rumination and worry as transdiagnostic forms of repetitive negative thinking (RNT). However, most of research has analyzed them separately, without considering gender differences. We analyzed common and specific roles of rumination and worry in accounting for depressive and anxiety symptom levels overall and as a function of gender in adolescents (N = 159). Rumination and worry items were loaded into separate RNT factors. Girls showed a higher use of rumination and worry and higher levels of depression and anxiety than boys. Structural equation modeling supported that both RNT factors accounted for gender differences in symptom levels: rumination was the strongest mediator for depression and worry the strongest mediator for anxiety. Our findings support both general and specific contributions of RNT to account for affective symptomatology during adolescence, particularly in girls., CRUE-CSIC agreement with Springer Nature, Comunidad de Madrid, Ministerio de Ciencia
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Role of miR-199a-5p in the post-transcriptional regulation of ABCA1 in response to hypoxia in peritoneal macrophages

  • Aranda Gómez, Juan Francisco
  • Pérez García, Ana
  • Torrecilla Parra, Marta
  • Fernández de Frutos, Mario
  • Martín Martín, Yolanda
  • Mateos Gómez, Pedro Antonio|||0000-0002-5539-2289
  • Pardo Marqués, Virginia
  • Busto Durán, Rebeca
  • Ramírez, Cristina M.
15 p., Hypoxia is a crucial factor contributing to maintenance of atherosclerotic lesions. The ability of ABCA1 to stimulate the efflux of cholesterol from cells in the periphery, particularly foam cells in atherosclerotic plaques, is an important anti-atherosclerotic mechanism. The posttranscriptional regulation by miRNAs represents a key regulatory mechanism of a number of signaling pathways involved in atherosclerosis. Previously, miR-199a-5p has been shown to be implicated in the endocytic and retrograde intracellular transport. Although the regulation of miR-199a-5p and ABCA1 by hypoxia has been already reported independently, the role of miR-199a-5p in macrophages and its possible role in atherogenic processes such us regulation of lipid homeostasis through ABCA1 has not been yet investigated. Here, we demonstrate that both ABCA1 and miR-199a-5p show an inverse regulation by hypoxia and Ac-LDL in primary macrophages. Moreover, we demonstrated that miR-199a-5p regulates ABCA1 mRNA and protein levels by directly binding to its 3?UTR. As a result, manipulation of cellular miR-199a-5p levels alters ABCA1 expression and cholesterol efflux in primary mouse macrophages. Taken together, these results indicate that the correlation between ABCA1-miR-199a-5p could be exploited to control macrophage cholesterol efflux during the onset of atherosclerosis, where cholesterol alterations and hypoxia play a pathogenic role., Comunidad de Madrid, Agencia Estatal de Investigación, Unión Europea
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Aliphatic azo compounds as programmable nitrogen donors in alkyne-mediated heterocycle synthesis: implications for medicinal chemistry

  • Mañas Hernández, Clara|||0000-0002-7265-4113
  • Merino Marcos, Estíbaliz|||0000-0002-2960-5404
14 p., Nitrogen-containing heterocycles constitute the core of many approved drugs and clinical candidates, making efficient and predictable C-N bond construction a central objetive in medicinal chemistry. Aliphatic azo compounds, traditionally employed as radical initiators, have recently emerged as versatile programmable nitrogen donors, capable of transferring their nitrogen atoms directly into heterocyclic scaffolds. This review summarizes advances in the reactivity of azoaliphatic derivatives with alkynes, highlighting pathways where nitrogen atoms are retained in the final products and on their implications for drug delivery. Cycloaddition processes provide rapid access to privileged heterocycles such as pyrazoles and pyrroles, scaffolds that are well represented in marketed drugs and support early structure-activity relationship exploration. Complementary radical and carbenoid manifolds enable the formation of hydrazides, atropisomeric frameworks and rarer nitrogen-sulfur motifs, offering increased three-dimensionality and new vectors for tuning potency, selectivity and pharmacokinetic properties. Where available, representative case studies illustrate how these scaffolds have contributed to lead optimization, target selectivity or progression toward clinical evaluation. Beyond reactivity, this review critically evaluates scalability, operational robustness and sustainability to define when azo-alkyne methodologies are realistically applicable in medicinal chemistry workflows. Rather than presenting azo compounds as general-purpose reagents, we frame them as strategic nitrogen donors whose reactivity can be aligned with specific stages of the drug discovery pipeline. When used in this manner, azo-alkyne transformations enable efficient scaffold generation, late-stage diversification and access to underexplored chemical space relevant to modern medicinal chemistry., Comunidad de Madrid, Ministerio de Ciencia e Innovación, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Behavioural patterns in aggregated demand response developments for communities targeting renewables

  • Cruz de la Torre, Carlos|||0000-0001-6937-9838
  • Palomar González, Esther|||0000-0001-5432-3962
  • Bravo Muñoz, Ignacio|||0000-0002-6964-0036
  • Aleixandre, Manuel
Encouraging consumers to embrace renewable energies and energy-efficient technologies is at stake, and so the energy players such as utilities and policy-makers are opening up a range of new value propositions towards more sustainable communities. For instance, developments of turn-key demand response aggregation and optimisation of distributed loads are rapidly emerging across the globe in a variety of business models focused on maximising the inherent flexibility and diversity of the behind-the-meter assets. However, even though these developments" added value is understood and of wide interest, measurement of the desired levels of consumer engagement is still on demonstration stages and assessment of technology readiness. In this paper, we analyse the characteristics of the loads, the behaviour of parameters, and in a final extent, the behaviour of each kind of consumer participating in aggregated demand scheduling. We apply both non-automatic and machine learning methods to extract the relevant factors and to recognise the potential consumer behaviour on a series of scenarios that are drawn using both synthetic data and living labs datasets. Our experimentation showcases a number of three patterns in which factors like the community"s demand volume and the consumer"s flexibility dominate and impact the performance of the tested development. The experimentation also makes current limitations arise within the existing electricity consumption datasets and their potential for inference and forecasting demand flexibility analytics., Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Trans-ferulic acid valorization into stilbene derivatives via tandem decarboxylation/Heck coupling using Pd/Al-SBA-15 materials

  • González Arellano, María del Camino|||0000-0003-3393-2130
  • Luque, Rafael
  • Dragomir-Maties, Georgiana
  • Ivars Barcelo, Francisco
  • Montejano Nares, Elena
Pd-containing Al-SBA-15 materials were prepared and characterized in view of their utilization in the two-step valorization of trans-ferulic acid into stilbenes via tandem decarboxylation/Mizoroki-Heck coupling. Materials were found to be highly active and selective in the proposed chemistries, with quantitative conversion to target products under mild reaction conditions (typically 100 degrees C, 3-6 h reaction). Relevant insights on catalyst deactivation via sintering (Pd nanoparticles agglomeration) were also observed for the synthesized materials., Comunidad de Madrid, Ministerio de Economía, Comercio y Empresa
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Libro o Monografía (Book)

La conformación de la Toledo Altomedieval: una aproximación a partir de la Vega Baja, The conformation of Early Medieval Toledo: an approach from the suburban area of Vega Baja

  • Castro Priego, Manuel|||0000-0002-0645-8341
  • Diarte Blasco, Pilar|||0000-0001-7799-593X
  • Olmo Enciso, Lauro|||0000-0002-0181-3084
Congreso Internacional Mérida, 26-28 de Junio de 2019, Desde mediados del siglo VI, la hasta entonces área periurbana de la Vega Baja (Toledo) sufrirá un intenso desarrollo urbanístico coincidiendo con la consolidación del Estado Visigodo, que convertirá definitivamente a Toledo en capital. En este trabajo presentamos una aproximación a los datos arqueológicos conocidos, así como el análisis planimétrico desarrollado a partir de la teledetección y de la evolución espacial y habitacional de esta zona entre los siglos I y VIII d. C., caracterizada en el periodo romano por la existencia de complejos industriales, villas y edificios de espectáculos, como el circo. De especial relevancia será el proceso transformador gestado a partir del siglo VIII, cuando comienza el expolio sistemático y el lento e intermitente abandono, que se extenderá a lo largo de toda la Edad Media, coincidiendo con un nuevo modelo de ocupación, que convertirá a esta zona en un espacio secundario de la Toledo islámica y cristiana., From the mid-6th century, the until then peri-urban area of the Vega Baja (Toledo) suffered an intense urban development coinciding with the consolidation of the Visigoth State, which made Toledo a capital. In this paper, we present a detailed study of the known archaeological data, as well as the planimetric analysis developed from remote sensing, of the spatial and residential evolution of this area between the 1st and 8th centuries AD., characterized in the Roman period by the existence of industrial complexes, villas and entertainment buildings, such as the circus. Of special relevance was the transformative process shaped from the 8th century, when the systematic plundering started and the slow and intermittent abandonment, which was extended throughout the Middle Ages, coinciding with a new occupation model and converting this zone in a secondary space of the Islamic and Christian Toledo., Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

A look back into Ancient Egyptian linguistic studies (c. 1995-2019), Retrospectiva de los estudios lingüísticos sobre el egipcio antiguo (c. 1995-2019)

  • Gracia Zamacona, Carlos|||0000-0003-2181-4663
This article provides a personal overview of the last 25-year linguistic research on ancient Egyptian, the language spoken and written in Egypt since the origin of the written Egyptian civilization (c. 3150 BC) until the disappearance of Coptic as a living language (17th century AC), the longest-attested human language. With this purpose, the main theoretical approaches and their relationship to teaching ancient Egyptian at the university are reviewed. Through the analysis of the more relevant bibliography of the period, four productive research lines are discussed: form and function; documents and the language; lexicon and grammar; and ancient Egyptian metalinguistics. The article ends with a short comment on the need of more corpus-based studies in the future instead of theoretically based frameworks for interpreting the ancient Egyptian language., En este artículo se propone una revisión personal de la investigación lingüística de los últimos 25 años sobre el egipcio antiguo, la lengua hablada y escrita en Egipto desde el origen de la civilización egipcia escrita (hacia 3150 a. C.) hasta la desaparición del copto como lengua viva (siglo XVII d. C.), la lengua humana documentada durante más tiempo. Con este fin, se revisarán las principales corrientes teóricas y su relación con la enseñanza del antiguo egipcio en ámbito universitario. Mediante el análisis de la bibliografía más relevante de este periodo, se comentan cuatro líneas de investigación productivas: forma y función; documentos y lengua; léxico y gramática; y metalingüística en el Egipto antiguo. El artículo finaliza con un breve comentario sobre la necesidad de más estudios basados en corpora en el futuro, en lugar de los basados en marcos teóricos para la interpretación del egipcio antiguo., Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Libro o Monografía (Book)

Modulating semograms: some procedures for semantic specification and re-categorization in the Pyramid Texts and other mortuary texts

  • Gracia Zamacona, Carlos|||0000-0003-2181-4663
Particular spellings of the hieroglyphic script illustrate how semograms may transmit not-so-standard information through their addition, reversion, and shape modification. Four study cases of determinatives are briefly discussed: determinatives as form-indices (of lexemes, word-composition and verbal forms); as means to express cultural categories with images; as markers of grammatical categories; and as instruments to recategorize qualities as entities. This paper contributes to our understanding of how fine-tuning semograms may enrich the writing-reading process and, more generally, to our understanding of the ancient Egyptian hieroglyphic writing system., Quelques graphies particulières de l’écriture hiéroglyphique montrent comment les sémogrammes peuvent transmettre des informations non standard par leur ajout, leur inversion et leur modification. Quatre cas d’étude de déterminatifs sont brièvement discutés : les déterminatifs comme indices de forme (de lexèmes, de compositions de mots et de formes verbales) ; comme moyen d’exprimer des catégories culturelles avec des images ; comme marqueurs de catégories grammaticales ; et comme instruments pour recatégoriser les qualités en tant qu’entités. Cet article contribue à notre compréhension de la manière dont la modulation des sémogrammes peut enrichir le processus de lecture et écriture et, plus généralement, à notre compréhension du système d’écriture hiéroglyphique de l’Égypte ancienne., Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Gold-catalyzed synthetic strategies towards four-carbon ring systems

  • Otárola Tejada, Guillermo Germán|||0000-0003-1367-3127
  • Vaquero López, Juan José|||0000-0002-3820-9673
  • Merino Marcos, Estíbaliz|||0000-0002-2960-5404
  • Fernández Rodríguez, Manuel Ángel|||0000-0002-0120-5599
Four carbon ring systems are frequently present in natural products with remarkable biological activities such as terpenoids, alkaloids, and steroids. The development of new strategies for the assembly of these structures in a rapid and efficient manner has attracted the interest of synthetic chemists for a long time. The current research is focused mainly on the development of synthetic methods that can be performed under mild reaction conditions with a high tolerance to functional groups. In recent years, gold complexes have turned into excellent candidates for this aim, owing to their high reactivity, and are thus capable of promoting a wide range of transformations under mild conditions. Their remarkable efficiency has been thoroughly demonstrated in the synthesis of complex organic molecules from simple starting materials. This review summarizes the main synthetic strategies described for gold-catalyzed four-carbon ring formation, as well as their application in the synthesis of natural products., Ministerio de Economía y Competitividad, Universidad de Alcalá, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Prosumers integration in aggregated demand response systems

  • Cruz de la Torre, Carlos|||0000-0001-6937-9838
  • Alskaif, Tarek
  • Palomar González, Esther|||0000-0001-5432-3962
  • Bravo Muñoz, Ignacio|||0000-0002-6964-0036
In recent years, the increasing popularity of renewable energy and energy-efficient technologies is creating a new movement towards more sustainable communities. Understanding energy consumption is important for the optimisation of resources and the implementation of ecological trends. This paper integrates electricity consumers into a cooperative framework for planning sustainable smart communities through aggregators, which reallocates consumers" demand according to available renewable energy supply collected from consumers and service providers. The aggregated demand response also includes consumers involved in energy production activities through microgeneration capabilities. A characterisation study of the different types of demand preferences is performed by defining scenarios of communities and consumers" behaviours, which are validated through a reputation factor. The results show that the system adequately manages demand reallocation following the preferences and contribution of consumers and/or prosumers. Besides, this research analyses the current energy policy concerning demand flexibility, demand aggregation and microgeneration capacity, and their regulations in Spain. Finally, microgeneration acceptance, the role of aggregators and prosumers in the scheduling process is also investigated through a series of surveys., Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

1,2,3-Benzotriazine Synthesis by Heterocyclization of p-Tosylmethyl Isocyanide Derivatives

  • Maqueda Zelaya, Francisco|||0000-0002-9962-159X
  • Aceña Bonilla, José Luis|||0000-0002-1777-8199
  • Merino Marcos, Estíbaliz|||0000-0002-2960-5404
  • Vaquero López, Juan José|||0000-0002-3820-9673
  • Sucunza Sáenz, David|||0000-0002-3307-4204
An efficient methodology to form 4-alkoxy- and 4-aryloxybenzo[d][1,2,3]triazines via an intramolecular heterocyclization of 1-azido-2-[isocyano(p-tosyl)methyl]benzenes under basic conditions has been developed. DFT calculations have been performed to further understand the mechanism of this heterocyclization, which occurs in good to excellent yields with a broad scope., Ministerio de Ciencia, Innovación y Universidades, Universidad de Alcalá, Instituto de Salud Carlos III, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Chemoselective cycloadditions to epoxide derivatives of erucic acid with CO2 and CS2: controlled access to value-added bio-derived compounds

  • Álvarez Miguel, Lucia|||0000-0002-6748-1158
  • González Mosquera, Marta Elena|||0000-0003-2248-3050
  • Whiteoak, Christopher John|||0000-0003-1501-5582
The potential for application of bio-derived molecules in our everyday lives is attracting vast interest as attention moves towards development of a truly circular and sustainable economy. Whilst a large number of molecules are naturally available and contain a variety of functional groups, few of these compounds are able to be immediately transferred to applications where they can directly replace established oil-derived species. This issue presents both a challenge and an opportunity for the synthetic chemistry community. This study demonstrates how erucic acid, a molecule containing an olefin and a carboxylic acid, which is readily available from commonly cultivated rapeseed oils, can be used as a platform to be chemoselectively converted into a range of value-added compounds using established and high yielding synthetic procedures. In particular, the work showcases approaches towards the chemoselective (and in cases regioselective) oxidation with m-CPBA and incorporation of cyclic carbonate and cyclic dithiocarbonate functionalities which have potential to be employed in a range of applications. Expedient routes to unusual derivatives containing both cyclic carbonate and cyclic dithiocarbonates are also presented taking advantage of the distinct reactivities of the two different epoxides in the intermediate compounds. This work also provides a rare example of the synthesis of internal cyclic dithiocarbonates. These new products have potential to be applied as monomers in the growing field of bio-based non-isocyanate polyurethane synthesis., Comunidad de Madrid, Ministerio de Ciencia, Innovación y Universidades, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Characterization of the genital microbiota in portuguese native goats

  • Nyoni, Nellia Felicity
  • Duarte Coimbra, Sofia
  • Forcina, Giovanni|||0000-0001-5727-7770
  • Pérez Pardal, Lucía
  • Beja Pereira, Albano
10 p., Evaluating the reproductive microbiome in small ruminant livestock, such as goats and sheep, is crucial for improving breeding performance, promoting animal health, and optimizing pregnancy outcomes. A healthy microbiome in the reproductive tract inhibits infections, regulates immune activity, and reduces the risk of microbial imbalances that negatively affect pregnancy. Understanding this microbiome also supports better disease control, informs advanced animal husbandry practices for goats and sheep, and contributes to global food security. This study aimed to characterize the genital microbiome of three local Portuguese goat breeds?Preta de Montesinho, Serrana, and Serpentina?using 16S rRNA metabarcoding. Samples were collected from 39 goats and, for comparison, seven sheep from a local breed?Serra da Estrela. Microbiome differences were obtained when integrating breed and sex factors in goats. The predominant genera in both vaginal and preputial samples included Fusobacterium, Aerococcus, Corynebacterium, Sediminibacterium, Campylobacter, and Ralstonia. Significant compositional differences were observed across breed, sex, and species as indicated by Bray?Curtis dissimilarity. By characterizing the caprine reproductive microbiota through metabarcoding, this study fills an important knowledge gap and establishes a baseline for future research on disease?associated changes in the male and female urogenital tract microbiota of small ruminants., Fundação para a Ciência e a Tecnologia
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Metal-Free Temperature-Controlled Regiodivergent Borylative Cyclizations of Enynes: BCl3-Promoted Skeletal Rearrangement

  • Milián López, Ana|||0000-0001-6101-077X
  • Fernández Rodríguez, Manuel Ángel|||0000-0002-0120-5599
  • Merino Marcos, Estíbaliz|||0000-0002-2960-5404
  • Vaquero López, Juan José|||0000-0002-3820-9673
  • García Gallego, Patricia
Metal-free borylative cyclization of biphenylembedded 1,3,5-trien-7-ynes in the presence of simple and inexpensive BCl3 provided synthetically useful borylated building blocks. The outcome of the process depends on the reaction temperature, with borylated phenanthrenes obtained at 60 °C and phenanthrenefused borylated cyclobutanes formed at 0°C. Based on DFT calculations, a mechanism for these novel transformations has been proposed, which involves an uncommon skeletal rearrangement, including migration of a methyl group and alkyne fragmentation, unprecedented in BCl3-promoted cyclization reactions, Ministerio de Ciencia e Innovación, Instituto de Salud Carlos III, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Laying the ground for the evolutionary adaptive conservation of the endangered Darwin's fox (Lycalopex fulvipes)

  • Cabello Stom, Javier
  • Forcina, Giovanni|||0000-0001-5727-7770
  • Hidalgo Hermoso, Ezequiel
  • Moreira Arce, Darío
  • Napolitano, Constanza
  • Millán Gasca, Javier
  • Jowers, Michael J.
  • Johnson, Warren E.
  • Dávila García, José Antonio
11 p., Darwin's fox (Lycalopex fulvipes) is one of the most narrowly distributed and endangered carnivores in the world. Until new records began to be collected in 2012, the species was known to occur only on Chiloé Island and the Nahuelbuta mountain range on the mainland. Here, we genotype the partial mitochondrial DNA control region, 11 microsatellite loci, and exon 2 and exon 3 of major histocompatibility complex class II to assess the genetic structure and variation of Darwin's foxes (n = 105) from all known localities, with 99 samples collected from the previously known populations and six from new localities where the species has been recorded. We found low genetic diversity, with six mitochondrial DNA haplotypes that were unevenly distributed across the population, strong microsatellite fixation and only one and two polymorphic loci in nuclear genes, respectively, raising major concern regarding susceptibility to infectious diseases. Genetic diversity was markedly lower on Chiloé than on the mainland, which hints at an interplay of founder effect and lack of gene flow following isolation other than small population size. The latter is a concern for the mainland counterpart, where it is compounded by high fragmentation. Since genetic data qualify these two populations as separate management units, conservations actions should be envisaged pertinently. Restoring and further enhancing the connectivity of mainland population is a priority. Based on the findings of this study, a reassessment of its IUCN conservation status, which is currently "Endangered", might be urgently needed., Vicerrectoría de Investigación, Innovación y Creación (Universidad de Santiago de Chile), Universidad de Castilla-La Mancha, Fundación Buin Zoo, Comunidad de Madrid, Agencia Nacional de Investigación y Desarrollo (ANID, Chile), Future Foundation, Morris Animal Foundation
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Visible light-mediated heterodifunctionalization of alkynylazobenzenes for 2H-indazole synthesis

  • Mañas Hernández, Clara|||0000-0002-7265-4113
  • Merino Marcos, Estíbaliz|||0000-0002-2960-5404
We disclose the heterodifunctionalization of alkynylazobenzenes promoted exclusively by visible light in the absence of any transition metal and/or photocatalyst. This reaction features excellent regioselectivity on a broad variety of substrates with perfect atom economy. Alcohols, carboxylic acids, thiols, amides, heterocycles, and even water are suitable substrates for the promotion of the oxyamination, sulfenoamination, and diamination reactions. In this manner, biologically active indazole scaffolds can be rapidly assembled from alkyne feedstocks., Comunidad de Madrid, Ministerio de Ciencia e Innovación, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Reductive Hydrogenation of Sulfido-Bridged Tantalum Alkyl Complexes: A Mechanistic Insight

  • Santamaría Angulo, Cristina|||0000-0003-2410-961X
  • Carbó, Jorge J.
  • Hernández Prieto, Cristina
  • Mena Montoro, Miguel|||0000-0001-7456-1212
  • Hernán-Gómez Robledo, Alberto|||0000-0001-7020-0196
  • Martín Alonso, Avelino|||0000-0002-9776-9670
  • Gómez Rubio, Manuel
  • Ricart, Josep M.
  • Puiggalí Jou, Jordi
Hydrogenolysis of a series of alkyl sulfido-bridged tantalum(IV) dinuclear complexes [Ta(?5-C5Me5)R(?-S)]2 [R = Me, nBu (1), Et, CH2SiMe3, C3H5, Ph, CH2Ph (2), p-MeC6H4CH2 (3)] has led quantitatively to the Ta(III) tetrametallic sulfide cluster [Ta(?5-C5Me5)(?3-S)]4 (4) along with the corresponding alkane. Mechanistic information for the formation of the unique low-valent tetrametallic compound 4 was gathered by hydrogenation of the phenyl-substituted precursor [Ta(?5-C5Me5)Ph(?- S)]2, which proceeds through a stepwise hydrogenation process, disclosing the formation of the intermediate tetranuclear hydride sulfide [Ta2(?5-C5Me5)2(H)Ph(?-S)(?3-S)]2 (5). Extending our studies toward tantalum alkyl precursors containing functional groups susceptible to hydrogenation, such as the allyl-and benzylsubstituted compounds [Ta(?5-C5Me5)(?3-C3H5)(?-S)]2 and [Ta(?5-C5Me5)(CH2Ph)(?-S)]2 (2), enables alternative reaction pathways en route to the formation of 4. In the former case, the dimetallic system undergoes selective hydrogenation of the unsaturated allyl moiety, forming the asymmetric complex [{Ta(?5-C5Me5)(?3-C3H5)}(?-S)2{Ta(?5-C5Me5)(C3H7)}] (6) with only one propyl fragment. Species 2, in addition to the hydrogenation of one benzyl fragment and concomitant toluene release, also undergoes partial hydrogenation and dearomatization of the phenyl ring on the vicinal benzyl unity to give a ?5-cyclohexadienyl complex [Ta2(?5-C5Me5)2(?-CH2C6H6)(?-S)2] (7). The mechanistic implications of the latter hydrogenation process are discussed by means of DFT calculations, Comunidad de Madrid, Universidad de Alcalá, Programa Estímulo a la Investigación de Jóvenes Investigadores
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Hyper-Cross-Linked Porous Polymer Featuring B−N Covalent Bonds (HCP-BNs): A Stable and Efficient Metal-Free Heterogeneous Photocatalyst

  • Señorans Fernández, Sara
  • Valencia Nieto, Isabel|||0000-0002-8320-9963
  • Merino Marcos, Estíbaliz|||0000-0002-2960-5404
  • Iglesias, Marta
  • Fernández Rodríguez, Manuel Ángel|||0000-0002-0120-5599
  • Maya, Eva M.
The first example of a porous polymer containing B-Ncovalentbonds, prepared from a tetraphene B-N monomer and biphenylas a comonomer, is reported. It was prepared using the solvent knittingstrategy, which allows the connection between the aromatic rings ofthe two monomers through methylene groups provided by an externalcross-linking agent. The new polymer exhibited micromeso porositywith an S (BET) of 612 m(2)/g, highthermal stability, and potential properties as a heterogeneous photocatalyst,since it is very active in the aza-Henry coupling reaction (>98%ofconversion and selectivity). After the first run, the catalyst improvesits photocatalytic activity, shortening the reaction time to only2 h and maintaining this activity in successive runs. The presenceof a radical in this structure that remains stable with successiveruns makes it a new type of material with potential applications asa highly stable and efficient photocatalyst., Ministerio de Ciencia e Innovación, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Electrochemically Driven One-pot Oxidative Conversion of Arylhydrazines into Aromatic Iodides

  • Salardón Jiménez, Noemí|||0000-0002-2215-804X
  • Otárola Tejada, Guillermo Germán|||0000-0003-1367-3127
  • Mañas Hernández, Clara|||0000-0002-7265-4113
  • Merino Marcos, Estíbaliz|||0000-0002-2960-5404
  • Batanero Hernán, María Belén|||0000-0003-2630-4814
The efficient metal-free electrosynthesis of 2,4-dinitrophenyl iodide is here reported starting from 2,4-dinitrophenylhydrazine. Surprisingly this dinitrated arylhydrazine minimizes, under the applied experimental conditions, any anodic multilayered film formation. This sustainable iodide-mediated oxidative dehydrazination enables coupling reaction of electrogenerated iodine with aryl radicals from electron-deficient arylhydrazines employing electricity as the driving force and an inexpensive halogen source. A mechanistic proposal explaining the formation of aryl iodides is presented and discussed., Universidad de Alcalá, Ministerio de Ciencia, Innovación y Universidades, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Libro o Monografía (Book)

The MORTEXVAR project: assessing variability in Earlier Egyptian mortuary texts

  • Gracia Zamacona, Carlos|||0000-0003-2181-4663
Financed by the Madrid Region through its Atracción de Talento programme, the MORTEXVAR (Earlier Egyptian Mortuary Texts Variability) project was run from the University of Alcalá between 2019 through 2024 by an international team of seven members, six collaborators and twenty-two contributors, so far. The MORTEXVAR project encompassed four main research lines: one, the creation of a comprehensive database of the Coffin Texts and Middle Kingdom copies of Pyramid Texts; two, an interdisciplinary approach to these corpora, including archaeology, philology, linguistics, religion studies, OCR engineering, text mining and anthropology; and three, the study of variability by the Coffin Text spells’ in-document position and geographical distribution. In addition, the MORTEXVAR project actively contributes to building a library specialised in the Ancient Near East and teaching undergraduate and postgraduate students at the Universidad de Alcalá. In 2024-2026, the project developed into new avenues of research to exploit the possibilities of applying quantitative, AI-based approaches to this extensive text corpus, and dealing with methodological and technical issues, including lack of data and how to cope with it, recovering the original edition of the documents through 3D-modelling, or improving the OCR and image processing, among others (Gracia Zamacona, et al. 2025)., Comunidad de Madrid, Junta de Castilla-La Mancha, Agencia Estatal de Investigación, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Cooperative demand response framework for a smart community targeting renewables: testbed implementation and performance evaluation

  • Cruz de la Torre, Carlos|||0000-0001-6937-9838
  • Palomar González, Esther|||0000-0001-5432-3962
  • Bravo Muñoz, Ignacio|||0000-0002-6964-0036
  • Gardel Vicente, Alfredo|||0000-0001-7887-4689
Demand response (DR) is emerging as the workhorse of achieving energy efficiency and reducing our carbon footprint, which persists as a major challenge amongst all the different energy-chain players, i.e., the utility providers, policy makers, consumers, and the technology sector. For instance, the Internet-of-Things (IoT) paradigm and network-enabled appliances/devices have escalated the expectations of what technology could do for the acceptance of DR programs. In this work, we design, deploy on a scalable pilot testbed, and evaluate a collaboration-based approach to the demand-side management of a community of electricity consumers that jointly targets green consumption. The design of the framework architecture is centralized via the so-called aggregator, which optimizes the demand scheduled by consumers along with their time frame preferences towards the maximization of the consumption of renewables. On the pilot, we opt for lightweight, yet efficient platforms such as Raspberry Pi boards,and evaluate them over a series of network protocols, i.e., MQTT-TLS and CoAP-DTLS, paying special attention to the security and privacy of the communications over Z-Wave, ZigBee, andWiFi. The experiments conducted are configured using two active Living Labs datasets from which we extract three community scenarios that vary according to the flexibility or rigidity of the appliances’ operation time frame demand. During the performance evaluation, processing and communication overheads lie within feasible ranges, i.e., the aggregator requires less than 2 s to schedule a small consumer community with four appliances, whereas the latency of its link to households’ controllers adds less than 100 ms. In addition, we demonstrate that our implementations running over WiFi links and UDP sockets on Raspberry Pi 4 boards are fast, though insecure. By contrast, secure CoAP (with DTLS) offers data encryption, automatic key management, and integrity protection, as well as authentication with acceptable overheads., Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

El Libro de las tres razones, «obra «estoriada»

  • Cossío Olavide, Mario Antonio|||0000-0002-1447-3891
El artículo ofrece una tipología de las cinco variedades de lagunas halladas en el manuscrito 6376 de la Biblioteca Nacional de Madrid que transmite la mayoría de las obras de Juan Manuel. Sobre la base de esta clasificación, se identifican cuáles variedades están presentes en el texto del Libro de las tres razones y se propone que algunas de ellas son espacios para ilustraciones nunca realizadas. Se propone que la obra, tal cual sobrevive, es un texto incompleto copiado a partir de un antígrafo «estoriado», hoy perdido, en el que el autor desarrolló un soporte visual para acompañar el mensaje político de su obra., Comunidad Autónoma de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Towards sustainable energy-efficient communities based on a scheduling algorithm

  • Bravo Muñoz, Ignacio|||0000-0002-6964-0036
  • Gardel Vicente, Alfredo|||0000-0001-7887-4689
  • Palomar González, Esther|||0000-0001-5432-3962
  • Cruz de la Torre, Carlos|||0000-0001-6937-9838
The Internet of Things (IoT) and Demand Response (DR) combined have transformed the way Information and Communication Technologies (ICT) contribute to saving energy and reducing costs, while also giving consumers more control over their energy footprint. Unlike current price and incentive based DR strategies, we propose a DR model that promotes consumers reaching coordinated behaviour towards more sustainable (and green) communities. A cooperative DR system is designed not only to bolster energy efficiency management at both home and district levels, but also to integrate the renewable energy resource information into the community's energy management. Initially conceived in a centralised way, a data collector called the "aggregator" will handle the operation scheduling requirements given the consumers' time preferences and the available electricity supply from renewables. Evaluation on the algorithm implementation shows feasible computational cost (CC) in different scenarios of households, communities and consumer behaviour. Number of appliances and timeframe flexibility have the greatest impact on the reallocation cost. A discussion on the communication, security and hardware platforms is included prior to future pilot deployment., Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Ti(III) Catalysts for CO2/Epoxide Copolymerization at Unusual Ambient Pressure Conditions

  • Hernán-Gómez Robledo, Alberto|||0000-0001-7020-0196
  • Sancho Bermejo, Ignacio|||0000-0001-8044-0898
  • Navarro Sanz, Marta
  • Montilla, Marc
  • Villar Salvador, Pedro|||0000-0001-9338-4530
  • Santamaría Angulo, Cristina|||0000-0003-2410-961X
  • Luis, Josep M.
Titanium compounds in low oxidation states are highly reducing species and hence powerful tools for the functionalization of small molecules. However, their potential has not yet been fully realized because harnessing these highly reactive complexes for productive reactivity is generally challenging. Advancing this field, herein we provide a detailed route for the formation of titanium(III) orthophenylendiamido (PDA) species using [LiBHEt3] as a reducing agent. Initially, the corresponding lithium PDA compounds [Li2(ArPDA)(thf)3] (Ar = 2,4,6-trimethylphenyl (MesPDA), 2,6-diisopropylphenyl (iPrPDA)) are combined with [TiCl4(thf)2] to form the heterobimetallic complexes [{TiCl(ArPDA)}(?-ArPDA){Li(thf)n}] (n = 1, Ar = iPr 3 and n = 2, Ar = Mes 4). Compound 4 evolves to species [Ti(MesPDA)2] (6) via thermal treatment. In contrast, the transformation of 3 into [Ti(iPrPDA)2] (5) only occurs in the presence of [LiNMe2], through a lithium-assisted process, as revealed by density functional theory (DFT). Finally, the Ti(IV) compounds 3?6 react with [LiBHEt3] to give rise to the Ti(III) species [Li(thf)4][Ti(ArPDA)2] (Ar = iPr 8, Mes 9). These low-valent compounds in combination with [PPN]Cl (PPN = bis(triphenylphosphine)iminium) are proved to be highly selective catalysts for the copolymerization of CO2 and cyclohexene epoxide. Reactions occur at 1 bar pressure with activity/selectivity levels similar to Salen? Cr(III) compounds., Comunidad de Madrid, Universidad de Alcalá, Programa Estímulo a la Investigación de Jóvenes Investigadores
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Libro o Monografía (Book)

Digital projects on earlier Egyptian mortuary texts at the University of Alcalá

  • Gracia Zamacona, Carlos|||0000-0003-2181-4663
  • Pizarro Pérez, Daniel|||0000-0003-0622-4884
  • Hernández Alonso, Álvaro|||0000-0001-9308-8133
  • Palazuelos Cagigas, Sira Elena|||0000-0002-2311-441X
  • Nieto Capuchino, Rubén|||0000-0002-8293-9665
  • Fuentes Jiménez, David|||0000-0001-6424-4782
  • Guerra Méndez, César
  • Diego Otón, Laura de|||0000-0002-4939-2987
  • Cuesta Ruiz, Patricia
  • Bartoli, Adin
  • Contreras Vargas, Anthonny Alexander
  • Madinabeitia Ruiz, Noelia
  • Grotenhuis, Jorke
  • García González, Luisa María
  • Eschenbrenner Diemer, Gersande|||0000-0002-9222-7784
This paper presents five interrelated digital projects on earlier Egyptian mortuary texts written in the hieroglyphic script and conducted at Universidad de Alcalá since 2019. The MORTEXVAR project (2019-2024) features the beta version of a database of the Middle Kingdom mortuary texts accessible on the Internet, an international conference plus collective volume on variability, a monograph on the variability of the Coffin Text spells, and a doctoral thesis on some fifty Coffin Text ensembles (coffin sets plus eventually burial chambers). The OCR-PT-CT project (2022) created and developed a digital toolset to perform optical character recognition (OCR) of the dataset available from the standard editions of the Pyramid Texts (PT) and the Coffin Texts (CT) to provide a semi-automatic transcription of the original text into Manuel de Codage (MdC). The resulting transcriptions are organised according to text paragraphs, spells and witnesses into a CSV file ready to be integrated with the MORTEXVAR project dataset. The recognition of hieroglyphs is based on the YOLOv3 network, which has been trained for that purpose with real and synthetic data. The TTAE project (2024) is the second phase of the OCR-PT-CT project; it proposes a semi-automatic transliteration by matching transliteration strings from the MORTEXVAR database with images from the CT publication (vols. I-II), some 4,000 image samples in all. This line of action will be furthered by the TM-CT project (2024-2026), extending the transliteration strings to the whole corpus (CT I-VIII) to make a much larger sample available for OCR. Complementarily, the T3D project (2025) will provide our research with a comprehensive catalogue of Middle Kingdom mortuary documents, mainly wooden coffins. This project will merge the archaeological information with the philological information obtained from the other projects, opening the possibility of creating 3D models of those documents. The research line implemented through these five projects has two aims: to accelerate the access of the research community to the most extensive corpus of texts ever written in Earlier Egyptian with a powerful tool that will permit the conduct of large-scale and in-depth analyses on graphemics, morphology, syntax and semantics, as well as interdisciplinary studies in history, religion, anthropology and archaeology; and give these texts universal access through the Internet following the basic principle of open science., Comunidad de Madrid, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Gold-catalyzed endo-selective cyclization of alkynylcyclobutanecarboxamides: synthesis of cyclobutane-fused dihydropyridones

  • Garre Hernández, María Soledad|||0000-0002-7075-3548
  • Otárola Tejada, Guillermo Germán|||0000-0003-1367-3127
  • Merino Marcos, Estíbaliz|||0000-0002-2960-5404
  • Sucunza Sáenz, David|||0000-0002-3307-4204
  • Aguilar, Enrique
  • Quirós López, María Teresa|||0000-0002-1552-0901
  • Vaquero López, Juan José|||0000-0002-3820-9673
  • García García, Patricia|||0000-0003-3671-5828
Cyclobutane-fused dihydropyridones can be efficiently synthesized by a completely endo-selective gold-catalyzed cyclization of alkynylcyclobutanes bearing an appended amide, which proceeds under mild conditions. The observed selectivity, which is reversed from that previously observed for the cyclization of related alcohols and acids, is supported by DFT calculations., Ministerio de Ciencia e Innovación, Instituto de Salud Carlos III, Comunidad de Madrid