Pasar al contenido principal

SOLUCIONES TECNOLOGICAS PARA LA IMPLANTACION DE MATERIALES SUPERCONDUCTORES EN MAQUINAS ELECTRICAS DE POTENCIA

ENE2014-52105-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2014
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSIDAD DE ZARAGOZA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 32
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced quench propagation in 2G-HTS coils co-wound with stainless steel or anodised aluminium tapes

  • Núñez-Chico, A. B.
  • Martínez Fernández, Elena
  • Angurel, Luis A.
  • Navarro, Rafael
Early quench detection and thermal stability of superconducting coils are of great relevance for practical applications. Magnets made with second generation high temperature superconducting (2G-HTS) tapes present low quench propagation velocities and therefore slow voltage development and high local temperature rises, which may cause irreversible damage. Since quench propagation depends on the anisotropy of the thermal conductivity, this may be used to achieve an improvement of the thermal stability and robustness of 2G-HTS coils. On pancake type coils, the thermal conductivity along the tapes (coil's azimuthal direction) is mostly fixed by the 2G-HTS tape characteristics, so that the reduction of anisotropy relies on the improvement of the radial thermal conductivity, which depends on the used materials between superconducting tapes, as well as on the winding and impregnation processes. In this contribution, we have explored two possibilities for such anisotropy reduction: by using anodised aluminium or stainless steel tapes co-wound with the 2G-HTS tapes. For all the analysed coils, critical current distribution, minimum quench energy values and both tangential and radial quench propagation velocities at different temperatures and currents are reported and compared with the results of similar coils co-wound with polyimide (Kapton®) tapes., This work was supported by the Spanish Ministerio de Economía y Competitividad and the European FEDER Program (Projects MAT2011-22719 and ENE-2014-52105-R), and by the Gobierno de Aragón (research group T12)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetic invisibility of the magnetically coated type-II superconductor in partially penetrated state

  • Peña-Roche, Jorge
  • Genenko, Y. A.
  • Badía-Majós, Antonio
The magnetic behavior of a cylindrical paramagnet/superconductor heterostructure has been studied by numerical simulations. Relying on the variational statement of the critical state model, our results show that magnetic invisibility is compatible with the partial penetration regime in the superconductor. This result accomplishes previous analytic studies that proved a possible perfect undetectability for the full penetration of magnetic flux. For a given geometry, invisibility may be realized only at a certain magnitude of the applied field. Such value decreases with increasing permeability of the magnetic sheath and eventually collapses to zero. This establishes a condition for obtaining realizable invisibility that extends previous expectations relying either on the full penetration ansatz or on perfect diamagnetism., Funding by Spanish MINECO and FEDER program (ENE2014-52105-R-9 project), DGA Grant No. T12, and partial support by the German DFG within the collaborative research center SFB 595 are gratefully acknowledged., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Improvement of structural and superconducting properties of Bi-2212 textured rods by substituting sodium

  • Nane, O.
  • Özçelik, Bekir
  • Sotelo, Andres
  • Madre, M. A.
In this paper, the physical and superconducting properties of BiSrCaNaCuO with x=0.0, 0.05, 0.075, 0.1, and 0.20 textured superconducting fiber rods prepared by a laser floating zone (LFZ) technique were studied. The effects of Na substitution for Ca have been investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), transport measurements, dc-magnetization, magnetic hysteresis and magnetic critical current density. The powder XRD patterns of samples have indicated that Bi-2212 phase is the major one, independently of Na content. The best critical temperature, T, has been found as 93.3 K from M-T data for the sample with 0.075 Na substitution. The maximum magnetic J value has been calculated as 1.35×10 A/cm at 10 K for the 0.10 Na sample. The maximum transport critical current density has directly been measured as 1.3×10 A/cm at 77 K for the 0.05Na sample., This work is supported by Research Fund of Çukurova University, Adana, Turkey, under Grant contracts no: FBA-2015-3934. M. A. Madre and A. Sotelo wish to thank the Gobierno de Aragón and Fondo Social Europeo (Grupo de Investigacion Consolidado T12) and MINECO-FEDER (project MAT2013-46505-C3-1-R) for financial support. M. A. Madre also acknowledges funding from MINECO-FEDER (Project ENE2014-52105-R)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of Yttrium substitution on superconductivity in Bi-2212 textured rods prepared by a LFZ technique

  • Özçelik, Bekir
  • Nane, O.
  • Sotelo, Andres
  • Madre, M. A.
In this study, the physical and superconducting properties of the Bi2Sr2Ca1−xYxCu2O8+δ with x=0.0, 0.05, 0.075 0.1, and 0.20 textured superconducting rods prepared by a laser floating zone technique were presented. The effects of Y3+ substitution for Ca2+ have been investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), dc-magnetization, magnetic hysteresis and critical current density calculation by using the Bean׳s critical state model. The powder XRD patterns of the samples have shown the Bi-2212 phase is the major one. Along with the powder samples, the textured rod surfaces also were investigated by XRD. The grains found to be well-oriented along the longitudinal rod axis which is a typical result for superconductors prepared by laser floating zone (LFZ) method, has been observed. The best critical temperature, TC, has been found as 92.9 K for the sample with 0.15Y substitution, under DC magnetic field of 50 Oe in ZFC mode. It has also been observed that the critical current density decreases with increasing Y-substitution. Using those values, the maximum JC value has been determined as 2.37×105 A/cm2 for the undoped sample., This work is supported by Research Fund of Çukurova University, Adana, Turkey, under Grant contracts nos.: FBA-2014-3500 and FBA-2015-3934. A. Sotelo and M.A. Madre acknowledge the Gobierno de Aragón and Fondo Social Europeo (Grupo de Investigacion Consolidado T12) and MINECO-FEDER (MAT2013-46505-C3-1-R) for financial support. M.A. Madre also acknowledges MINECO-FEDER (Project ENE2014-52105-R) for funding., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of Na substitution on superconducting properties of Bi-2212 ceramics prepared by Sinter-Forged process

  • Nane, O.
  • Özçelik, Bekir
  • Sotelo, Andres
  • Madre, M. A.
Bulk textured BiSrCaNaCuO (x = 0.0, 0.05, 0.075 0.1, 0.15, and 0.20) ceramics have been prepared by a polymer solution method followed by sinter-forging process. The microstructure and superconducting properties of textured samples were affected by Na substitution. According to XRD data, all samples show that Bi-2212 phase is the major one, and main peaks corresponded to the (00ℓ) diffractions confirming that the crystallographic c-axis is perpendicular to the surface. SEM micrographs showed that samples are composed of well-stacked and oriented grains. The best critical temperature, T, was measured as 85.6 K for x = 0.075. The critical current density Jc, values decrease gradually with the increase of applied magnetic field. The maximum calculated Jc was 1.38 × 10 A/cm at 10 K for 0.075 Na sample which is about four times higher than the 0.34 × 10 A/cm value determined for the pure sample. The anisotropic properties of these textured materials have been investigated using magnetic measurements., This work is supported by Research Fund of Çukurova University, Adana, Turkey, under grant contracts no: FBA-2014-3500. A. Sotelo and M.A. Madre acknowledge the Gobierno de Aragón and Fondo Social Europeo (Grupo de Investigacion Consolidado T12) and MINECO-FEDER (MAT2013-46505-C3-1-R) for financial support. M.A. Madre also acknowledges MINECO-FEDER (Project ENE2014-52105-R) for funding. Authors would like to acknowledge the use of Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza. This work is also supported by Research Fund of Hakkari University, Turkey, under grant contracts no: MF2014BAP1., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modelling toolkit for simulation of maglev devices

  • Peña-Roche, Jorge
  • Badía-Majós, Antonio
arXiv:1612.09266v1, A stand-alone App has been developed, focused on obtaining information about relevant engineering properties of magnetic levitation systems. Our modelling toolkit provides real time simulations of 2D magneto-mechanical quantities for superconductor (SC)/permanent magnet structures. The source code is open and may be customised for a variety of configurations. Ultimately, it relies on the variational statement of the critical state model for the superconducting component and has been verified against experimental data for YBaCuO/NdFeB assemblies. On a quantitative basis, the values of the arising forces, induced superconducting currents, as well as a plot of the magnetic field lines are displayed upon selection of an arbitrary trajectory of the magnet in the vicinity of the SC. The stability issues related to the cooling process, as well as the maximum attainable forces for a given material and geometry are immediately observed. Due to the complexity of the problem, a strategy based on cluster computing, database compression, and real-time post-processing on the device has been implemented., Funding of this research by Spanish MINECO and FEDER programme (Project ENE2014-52105-R) and by Gobierno de Aragón (Research group T-12) is gratefully acknowledged. J Peña-Roche acknowledges a Research Grant by ICMA (PI2 programme 2015)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of ball milling on the local magnetic flux distribution and microstructure of in situ Fe/MgB2 conductors

  • Laliena, Carlos
  • Qureishy, T.
  • Martínez Fernández, Elena
  • Navarro, Rafael
  • Mikheenko, P.
  • Johansen, T. H.
  • Kováč, P.
The effects of the precursor milling energy on the superconducting and microstructural homogeneity of Fe-sheathed MgB2 monocore wires and tapes have been investigated. The conductors were produced by the powder-in-tube method using drawing and rolling deformation methods and in situ reaction. Combined magneto-optical, structural and magnetization measurements were performed on MgB2 superconducting tapes prepared from differently milled precursors revealing hidden mechanisms controlling their critical current density. Local degradation of the superconducting properties observed in some analysed conductors has been identified and correlated with microstructural observations., This work was supported by the Spanish Ministerio de Economía y Competitividad and the European FEDER Program (Projects MAT2011-22719 and ENE-2014-52105-R), and by the Gobierno de Aragón (research group T12)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dendritic flux avalanches in a superconducting MgB2 tape

  • Qureishy, T.
  • Laliena, Carlos
  • Martínez Fernández, Elena
  • Qviller, A. J.
  • Vestgården, J. I.
  • Johansen, T. H.
  • Navarro, Rafael
  • Mikheenko, P.
Tapes of MgB2 with high critical current have a significant technological potential, but can experience operational breakdown due to thermomagnetic instabilities. Such events are routinely registered by magnetisation measurements, but were never observed by direct imaging techniques. Here we report magneto-optical imaging visualisation of a tape with reduced thickness and enhanced critical current density. The spatial structure of the thermomagnetic avalanche events was resolved, and the reproducibility and nucleation thresholds were determined. Avalanches appearing at low fields are small intrusions at the tape edges, while larger fields create more extensive avalanches having dendritic structures similar to those observed in thin-film superconductors. In contrast to dendritic avalanches in thin films, the avalanches in the tapes show reproducibility to a larger extent., This work was financially supported by the University of Oslo, the Spanish Ministerio de Economía y Competitividad, the European FEDER Program (Projects MAT2011-22719 and ENE-2014-52105-R) and the Gobierno de Aragón (research group T12)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Quench dynamics in MgB2 Rutherford cables

  • Cubero, A.
  • Navarro, Rafael
  • Kováč, P.
  • Kopera, L.
  • Rindfleisch, M.
  • Martínez Fernández, Elena
The generation and propagation of quench induced by a local heat disturbance or by overcurrents in MgB2 Rutherford cables have been studied experimentally. The analysed cable is composed of 12 strands of monocore MgB2/Nb/Cu10Ni wire and has a transposition length of about 27 mm. Measurements of intra- and inter-strand voltages have been performed to analyse the superconducting-to-normal transition behaviour of these cables during quench. In case of external hot-spots, two different time-dynamic regimes have been observed, a slow stage for the formation of the minimum propagation zone (MPZ), and a fast dynamics once the quench is triggered and propagates to the rest of the cable. Significant local variations of the quench propagation velocity across the strands around the MPZ have been observed, but with average quench propagation velocities closely correlated with the predictions given by one-dimensionalgeometry models. For quench induced by overcurrents (i.e. with applied currents higher than the critical current) the nucleation of many normal zones distributed within the cable, which overlap during quench propagation, gives a distinctive and faster quench dynamics., This work was supported by project ENE-2014-52105-R (from Spanish Ministerio de Economía, Industria y Competitividad and European FEDER Program) and by the Slovak Scientific Agency under the APVV-14-0522., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Continuous processing of Bi2Sr2CaCu2O8+δ precursor powders

  • Laliena, Carlos
  • Amaveda, H.
  • Özçelik, Bekir
  • Martínez Fernández, Elena
  • Fuente, Germán F. de la
  • Angurel, Luis A.
A continuous solid-state process inside a roller furnace has been used to fabricate Bi-2212 powders. These powders were synthesized for their use as precursors to obtain textured monoliths by laser induced directional solidification. A thermal cycle has been defined, which depends on the length of the furnace, the prefixed temperature profile and the velocity of the sample inside the furnace. Powder properties have been studied as a function of the number of processing cycles. Phase evolution has been analyzed using X-ray diffraction, while other relevant properties of the powders, including grain size distribution, thermal behavior and temperature dependence of the AC susceptibility, have also been measured. These properties have been compared with those of commercial powders and precursors prepared using a standard solid-state protocol. Textured samples using these continuous solid-state precursors exhibit superconducting properties comparable to those similarly processed but prepared from commercial powders., This work was supported by the Spanish Ministerio de Economía y Competitividad and the European FEDER Program (project ENE2014-52105-R), and by the Gobierno de Aragón (research groups T12, T87 and T54_17R). The authors acknowledge the use of Servicio General de Apoyo a la Investigación-SAI, University of Zaragoza., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Combined experimental and computational characterization of crosslinked collagenbased hydrogels

  • Valero, Clara
  • Amaveda, H.
  • Mora Alfonso, Mario
  • García-Aznar, Jose Manuel
Collagen hydrogels are widely used for in-vitro experiments and tissue engineering applications. Their use has been extended due to their biocompatibility with cells and their capacity to mimic biological tissues; nevertheless their mechanical properties are not always optimal for these purposes. Hydrogels are formed by a network of polymer filaments embedded on an aqueous substrate and their mechanical properties are mainly defined by the filament network architecture and the individual filament properties. To increase properties of native collagen, such as stiffness or strain-stiffening, these networks can be modified by adding crosslinking agents that alter the network architecture, increasing the unions between filaments. In this work, we have investigated the effect of one crosslinking agent, transglutaminase, in collagen hydrogels with varying collagen concentration. We have observed a linear dependency of the gel rigidity on the collagen concentration. Moreover, the addition of transglutaminase has induced an earlier strain-stiffening of the collagen gels. In addition, to better understand the mechanical implications of collagen concentration and crosslinkers inclusion, we have adapted an existing computational model, based on the worm-like chain model (WLC), to reproduce the mechanical behavior of the collagen gels. With this model we can estimate the parameters of the biopolymer networks without more sophisticated techniques, such as image processing or network reconstruction, or, inversely, predict the mechanical properties of a defined collagen network., The work corresponding to C. Valero and J.M. García-Aznar was supported by the European Research Council (ERC) through project ERC-2012-StG 306571 and the Spanish Ministry of Economy and Competitiveness through the project DPI2015-64221-C2-1-R and by the Gobierno de Aragon (research group T86). The work corresponding to H. Amaveda and M.Mora was supported by the Spanish Ministry of Economy and Competitiveness and the European FEDER Program (project ENE1014-52105-R) and by the Gobierno de Aragón (research group T12)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Josephson critical currents in annular superconductors with Pearl vortices

  • Badía-Majós, Antonio
We investigate the influence of Pearl vortices in the vicinity of an edge-type Josephson junction for a superconducting thin-film loop in the form of an annulus, under uniform magnetic field. Specifically, we obtain the exact analytic formulation that allows one to describe the circulating current density and the gauge invariant phase increment Δϕ across the junction. The main properties of Δϕ and their influence on the critical current pattern Ic(B) are described quantitatively in terms of the loop's width-to-radius ratio W/R and of the vortex position within the loop rv. It is shown that narrow loops (W/R<0.3) may be well described by the straight geometry limit. However, such approximation fails to predict a number of distinctive features captured by our formulation, such as the node lifting effect of the Ic(B) pattern in wide loops or the actual influence of a vortex pinned at different positions., This work was supported by Spanish Mineco, under Projects No. ENE2014-52105-R and No. ENE2017-83669-C4-1-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of Na substitution and Ag addition on the superconducting properties of Bi-2212 textured materials

  • Özçelik, Bekir
  • Nane, O.
  • Sotelo, Andres
  • Amaveda, H.
  • Madre, M. A.
The effect of Ag addition on the structural and superconducting properties of Bi2Sr2Ca0.925Na0.075Cu2Oy + x wt% Ag materials with x = 0, 1, 3, and 5 prepared by sol–gel method, followed by directional growth using the laser floating zone (LFZ) technique has been investigated. Powder XRD measurements demonstrate that all samples are composed by nearly single Bi-2212 phase. SEM micrographs and EDX results confirms that Bi-2212 is the major phase with minor amounts of a Bi-free one (Sr,Ca)CuO2 and metallic Ag. According to the magnetic results, Ag does not modify the superconducting critical temperature, T c , but significantly increases the magnetic hysteresis loop area. The magnetic critical current density is maximum in the 3 wt% Ag containing samples, due to the larger grain clusters found in these samples, reaching 2.1 × 105 A/cm2 at 10 K. Moreover, Ag addition also improves the rods mechanical properties, determined by three point bending tests. The highest bending stress is also reached in the 3 wt% Ag samples., This work is supported by Research Fund of Çukurova University, Adana, Turkey, under Grant Contracts No: FBA-2016-6626. M. A. Madre acknowledges MINECO-FEDER (Project ENE2014-52105-R) for funding. M. A. Madre and A. Sotelo acknowledge the MINECO-FEDER (Project MAT2013-46505-C3-1-R) and the Gobierno de Aragón (Consolidated Research Group T12) for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Intrinsic pinning by naturally occurring correlated defects in FeSe1−xTex superconductors

  • Amigó, M. L.
  • Ale Crivillero, M. V.
  • Franco, D. G.
  • Badía-Majós, Antonio
  • Guimpel, J.
  • Campo, Javier
  • Damay, F.
  • Porcher, F.
  • Condó, A. M.
  • Nieva, G.
We study the angular dependence of dissipation in the superconducting state of FeSe and Fe(Se1−x Te x ) through electrical transport measurements, using crystalline intergrown materials. We reveal the key role of the inclusions of the non superconducting magnetic phase Fe1−y (Se1−x Te x ), growing into the Fe(Se1−x Te x ) pure β-phase, in the development of a correlated defect structure. The matching of both atomic structures defines the growth habit of the crystalline material as well as the correlated planar defects orientation., Work partially suported by Conicet PIP 2014-0164, ANPCyT, PICT 2014-1265 and Sectyp U N Cuyo. Funding of this research by Spanish MINECO and FEDER programme (Project ENE2014-52105-R-9) is gratefully acknowledged by AB-M. JC acknowledges the Grant No. MAT2015-68200-C2-2-P from the Spanish MINECO. Neutron diffraction experiments conducted at the LLB, were supported through the research proposals 11844, 12353 and 12354., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Laser induced circular texture in Bi-2212 bulk

  • Amaveda, H.
  • Martínez Fernández, Elena
  • Mora Alfonso, Mario
  • Fuente, Germán F. de la
  • Angurel, Luis A.
Trabajo presentado a la 13th European Conference on Applied Superconductivity (EUCAS), celebrada en Geneva (Suiza) del 17 al 21 de septiembre de 2017., Laser Zone melting (LZM) has been widely used to induce texture in Bi-2212 bulk materials, both in cylindrical geometries and in monolithic planar samples. Texture is induced due to its strong crystal growth anisotropy, obtaining a microstructure characterized by planar superconducting grains with the a-b plane aligned perpendicular to the solidification front. This technology has produced samples with high critical current values when the current flows in the longitudinal direction (i.e. parallel to the grain’s a-b planes). In addition, this geometry induces critical current anisotropy, with values of the order of 0.45 lower when the critical current is measured perpendicular to the longitudinal direction. In this work we present the use of Laser Zone melting techniques to process planar monolithic samples either with a ring geometry or with more complex shapes, such helical, meander, etc, where the current path direction is not constant, and therefore superconducting grains have to change their growth direction. Combining different sample movements during LZM process it is possible to assure that the solidification front is always perpendicular to the current path direction. We have performed a microstructural analysis of these samples in order to analyse the effect of changing growth direction during process for the different analysed geometries. The microstructure depends on the size of the superconducting grains and on the radius needed to perform this change in direction. It is important to have in mind that these grains can reach sizes of the order of millimetres. It has been observed that the superconducting grains form a set of domains, changing smoothly their growth direction. The processing parameters allow the control of the angles between consecutive domains needed to minimize the reduction in the critical current thattakes place when the current has to change its flowing direction. In all the cases, the critical current values in the different regions of the samples have been measured., This work was supported by the Spanish Ministerio de Economía y Competitividad and the European FEDER Program (project ENE2014-52105-R), by the Gobierno de Aragón (research groups T12 and T87)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Laser modification of 2G-HTS tapes surface

  • Turan, Neslihan
  • Martínez Fernández, Elena
  • Fuente, Germán F. de la
  • Angurel, Luis A.
  • Koralay, Haluk
  • Cavdar, Sukru
Trabajo presentado a la 13th European Conference on Applied Superconductivity (EUCAS), celebrada en Geneva (Suiza) del 17 al 21 de septiembre de 2017., Lasers are powerful tools to modify materials surfaces and to produce a controlled set of defects. At this moment new UV-lasers, with emission in the picosecond regime, are appearing in the market. In this study, second generation of high temperature superconducting (2G-HTS) tapes are scanned with these ps-UV pulsed lasers to generate a uniform micro and nanostructure on the surface of these tapes. We have been studying the influence of several parameters that are important in laser processing. When the burst mode is used, individual dots are created in the surface of the superconductor. We have analysed the influence of the energy of each individual laser pulse and the number of pulses. We have observed that, depending on the total energy in each dot, different regimes are reached. We have determined which is the minimum energy to start to affect the superconductor and which is the energy level that completely destroys the superconducting layer. This allows defining the range of working conditions that can be used in these experiments. When a continuous laser-scanning mode is used, other parameters are also relevant: the energy of the laser beam, the frequency, its scanning speed or the overlapping between different lines. In addition a wobbling mode can be used. Modification of all these parameters allows to develop a wide range of microstructures on the sample surface. These deformed regions were examined with FESEM and Confocal microscopy, and, in combination with SQUID magnetometry, they provided information to ascertain how the samples magnetic properties were modified., This work was supported by TUBITAK (115F008 and 2214-A 1059B141501207) and by the Spanish MINECO and the European FEDER Program (project ENE2014-52105-R), by the Gobierno de Aragón (research groups T12 and T87)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Magneto-optical, microstructural and magnetization measurements of in situ Fe/MgB2 conductors made from ball-milled precursor

  • Martínez Fernández, Elena
  • Laliena, Carlos
  • Qureishy, T.
  • Navarro, Rafael
  • Mikheenko, P.
  • Johansen, T. H.
  • Kováč, P.
Trabajo presentado a la 13th European Conference on Applied Superconductivity (EUCAS), celebrada en Geneva (Suiza) del 17 al 21 de septiembre de 2017., Highly uniform microstructure and phase composition as well as technologically reproducible critical current densitiy, Jc, is compulsory for advanced applications of MgB conductors. Grain refinement by mechanical ball-milling of precursor powders would improve homogeneity and provide additional pinning. The increase of the milling energy transferred to the precursor causes a significant enhancement of Jc in the high field region but may also produce some undesirable effects such as a decrease of Jc values at low magnetic fields, higher oxygen content and, in some cases, degradation of the deformation properties during wire manufacture. To further explore the reasons of such a decrease in Jc in the low field range, we have analysed the local magnetic flux distribution inside MgB tapes made from different balled-milled powders using magneto-optical (MO) imaging. MO imaging performed in field-cooled samples, following a specific magnetic field sequence, highlights the distortions in the magnetic pattern so that it has been found very helpful to reveal inhomogeneities in the superconductor. The combined analysis of MO, scanning electron microscopy images and magnetization measurements has revealed hidden mechanisms controlling their critical current density. Local degradation of the superconducting properties observed in some analysed conductors has been identified and correlated with microstructural observations., This work was supported by the Spanish Ministerio de Economía y Competitividad and the European FEDER Program (Projects MAT2011-22719 and ENE-2014-52105-R) and by Gobierno de Aragón (research group T12)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Quench propagation in Rutherford MgB2 cables

  • Cubero, A.
  • Martínez Fernández, Elena
  • Navarro, Rafael
  • Kováč, P.
  • Kopera, L.
Trabajo presentado a la 13th European Conference on Applied Superconductivity (EUCAS), celebrada en Geneva (Suiza) del 17 al 21 de septiembre de 2017., Rutherford cables offer several advantages over single conductors for different foreseen applications, since they are more flexible and may achieve a reduction of the AC losses by using appropriate transposition length and inter-strand electrical resistance. Furthermore, the optimization of these cables should also achieve the required thermal stability, which is mainly determined by the thermal conductivity along the wires, as well as the heat transfer across the strands. The quench propagation of two types of MgB Rutherford cables has been measured and analysed. Both cables are made of 12 strands with a transposition length of about 20 mm and have rectangular cross-section with final dimensions of 2.7 mm width and 0.7 mm thickness. Two different wires were used as strands: mono- and multi-filamentary wires with Cu10Ni and Cu sheaths, respectively. Both wires have similar diameter of 0.39 mm and Nb barrier to minimise the chemical reaction between the precursor powders and the sheath during the in situ formation of the MgB phase. The quench development has been induced by a local hot spot at different operating conditions. The quench propagation has been analysed using voltage taps placed at different positions of the strands. The effect of the sheath metal on the relevant quench parameters, such as quench propagation velocity and minimum quench energy, is also presented., This work was supported by the Spanish Ministerio de Economía y Competitividad and the European FEDER Program (project ENE-2014-52105-R) and by the Gobierno de Aragón (research group T12)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Quench dynamics in different configurations of MgB2 Rutherford cables

  • Martínez Fernández, Elena
  • Navarro, Rafael
  • Cubero, A.
  • Kováč, P.
  • Kopera, L.
Trabajo presentado a la 14th European Conference on Applied Superconductivity (EUCAS), celebrada en Glasgow (Escocia) del 1 al 5 de septiembre de 2019., This work was supported by project ENE-2014-52105-R and ENE2017-83669-C4-1-R (from Spanish Ministerio de Ciencia, Innovación y Universidades, Agencia Estatal de Investigación (AEI) and European FEDER Program) and by the Slovak Scientific Agency under the APVV-14-0522 project. Authors also would like to acknowledge the Gobierno de Aragón “Construyendo Europa desde Aragón” (research group T54_17R) and the “Servicio General de Apoyo a la Investigación-SAI” of the University of Zaragoza and Matt Rindfleisch (HyperTech Research, Inc) for providing the NiCu-sheathed wires for cable manufacture., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Thermal stability of conduction-cooled no-insulated HTS coils at currents up to 400 A

  • Cubero, A.
  • Núñez-Chico, A. B.
  • Navarro, Rafael
  • Angurel, Luis A.
  • Martínez Fernández, Elena
Trabajo presentado a la 14th European Conference on Applied Superconductivity (EUCAS), celebrada en Glasgow (Escocia) del 1 al 5 de septiembre de 2019., This work was supported by Spanish Ministerio de Ciencia, Innovación y Universidades, Agencia Estatal de Investigación (AEI) and European FEDER Program (projects ENE-2014-52105-R and ENE2017-83669-C4-1-R) and by the regional Gobierno de Aragón “Construyendo Europa desde Aragón” (research group T54_17R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electromagnetic behaviour and thermal stability of a conduction-cooled, no-insulated 2G-HTS coil at intermediate temperatures

  • Cubero, A.
  • Núñez-Chico, A. B.
  • Navarro, Rafael
  • Angurel, Luis A.
  • Martínez Fernández, Elena
The electromagnetic and thermal properties of a double pancake coil made of second generation high temperature superconductor, 2G-HTS, have been studied. The coil was wound with no-insulation between turns (NI coil) and was later impregnated with epoxy resin and glued to a copper support plate. The coil was thermally anchored to the cryocooler cold finger and cooled by conduction. After several thermal cycles no degradation of its superconducting properties was observed. The coil was operated under high vacuum and high currents (up to 400 A in steady conditions) at different temperatures in the range between 5 K and 77 K, with special focus on the analysis above 30 K. The charge and discharge characteristics, and the experimentally measured and numerically estimated critical currents, have been studied. The different loss contributions during current ramp and the thermal contact conductance between different parts of the double pancake coil have been measured. The implications of these two factors on the thermal stability and the behaviour of the whole cryogenic system are discussed., This work was supported by projects ENE2017-83669-C4-1-R (MINECO/AEI/FEDER, EU) and ENE-2014-52105-R (MINECO/FEDER, EU) and by the Gobierno de Aragón “Construyendo Europa desde Aragón” (research group T54_17R). The authors acknowledge the use of Servicio General de Apoyo a la Investigación-SAI, University of Zaragoza., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fabrication and evolution of nanoprecursors to produce Bi(Pb)-2212/Ag textured superconducting composites

  • Sotelo, Andres
  • Özçelik, Bekir
  • Amaveda, H.
  • Bruned, A.
  • Madre, M. A.
Bi1.6Pb0.4Sr2CaCu2O8+δ+x wt% Ag (x=0, 1, 3, and 5) nanoprecursors were prepared using a coprecipitation method. Microstructure has shown that initial precursors are composed of nanometric particles which rapidly grow with the subsequent thermal treatments. FTIR has allowed following the decomposition path from the precipitate to the final oxides mixture and has been related with the decomposition ranges found in DTA–TGA. After hot-pressing and annealing, these nanoprecursors produce materials with large and well oriented grains, very low porosity, and low amounts of secondary phases. Electrical transport properties have shown that critical temperature values are maintained unchanged independently of Ag content while room temperature resistivity decreases with Ag addition. On the other hand, critical current densities are drastically influenced by Ag, reaching an improvement of about 185% for the 3 wt% Ag-containing samples, compared with the Ag-free ones., The authors wish to thank the Gobierno de Aragón and Fondo Social Europeo (Grupo de Investigacion Consolidado T12) for financial support. A. Sotelo and M. A. Madre acknowledge MINECO-FEDER (MAT2013-46505-C3-1-R) for funding. M. A. Madre and H. Amaveda also acknowledge MINECO-FEDER (Project ENE2014-52105-R) for funding. Authors would like to acknowledge the use of Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Effect of Na substitution on superconducting properties of Bi-2212 ceramics prepared by Sinter-Forged process

  • Nane, O.
  • Özçelik, B.
  • Sotelo, A.
  • Madre, M. A.
Bulk textured Bi2Sr2Ca1-xNaxCu2Oy (x = 0.0, 0.05, 0.075 0.1, 0.15, and 0.20) ceramics have been prepared by a polymer solution method followed by sinter-forging process. The microstructure and superconducting properties of textured samples were affected by Na substitution. According to XRD data, all samples show that Bi-2212 phase is the major one, and main peaks corresponded to the (00l) diffractions confirming that the crystallographic c-axis is perpendicular to the surface. SEM micrographs showed that samples are composed of well-stacked and oriented grains. The best critical temperature, TC, was measured as 85.6 K for x = 0.075. The critical current density Jc, values decrease gradually with the increase of applied magnetic field. The maximum calculated Jc was 1.38 × 105 A/cm2 at 10 K for 0.075 Na sample which is about four times higher than the 0.34 × 105 A/cm2 value determined for the pure sample. The anisotropic properties of these textured materials have been investigated using magnetic measurements.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Combined experimental and computational characterization of crosslinked collagen-based hydrogels

  • Valero, C.
  • Amaveda, H.
  • Mora, M.
  • García-Aznar, J.M.
Collagen hydrogels are widely used for in-vitro experiments and tissue engineering applications. Their use has been extended due to their biocompatibility with cells and their capacity to mimic biological tissues; nevertheless their mechanical properties are not always optimal for these purposes. Hydrogels are formed by a network of polymer filaments embedded on an aqueous substrate and their mechanical properties are mainly defined by the filament network architecture and the individual filament properties. To increase properties of native collagen, such as stiffness or strain-stiffening, these networks can be modified by adding crosslinking agents that alter the network architecture, increasing the unions between filaments. In this work, we have investigated the effect of one crosslinking agent, transglutaminase, in collagen hydrogels with varying collagen concentration. We have observed a linear dependency of the gel rigidity on the collagen concentration. Moreover, the addition of transglutaminase has induced an earlier strain-stiffening of the collagen gels. In addition, to better understand the mechanical implications of collagen concentration and crosslinkers inclusion, we have adapted an existing computational model, based on the worm-like chain model (WLC), to reproduce the mechanical behavior of the collagen gels. With this model we can estimate the parameters of the biopolymer networks without more sophisticated techniques, such as image processing or network reconstruction, or, inversely, predict the mechanical properties of a defined collagen network.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Dendritic flux avalanches in a superconducting MgB2 tape

  • Qureishy, T.
  • Laliena, Carlos
  • Martínez, Elena
  • Qviller, A.J.
  • Vestgården, J.I.
  • Johansen, T.H.
  • Navarro, Rafael
  • Mikheenko, P.
Tapes of MgB2 with high critical current have a significant technological potential, but can experience operational breakdown due to thermomagnetic instabilities. Such events are routinely registered by magnetisation measurements, but were never observed by direct imaging techniques. Here we report magneto-optical imaging visualisation of a tape with reduced thickness and enhanced critical current density. The spatial structure of the thermomagnetic avalanche events was resolved, and the reproducibility and nucleation thresholds were determined. Avalanches appearing at low fields are small intrusions at the tape edges, while larger fields create more extensive avalanches having dendritic structures similar to those observed in thin-film superconductors. In contrast to dendritic avalanches in thin films, the avalanches in the tapes show reproducibility to a larger extent.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Quench dynamics in MgB2 Rutherford cables

  • Cubero, A.
  • Navarro, R.
  • Kovác, P.
  • Kopera, L.
  • Rindfleisch, M.
  • Martínez, E.
The generation and propagation of quench induced by a local heat disturbance or by overcurrents in MgB2 Rutherford cables have been studied experimentally. The analysed cable is composed of 12 strands of monocore MgB2/Nb/Cu10Ni wire and has a transposition length of about 27 mm. Measurements of intra- and inter-strand voltages have been performed to analyse the superconducting-to-normal transition behaviour of these cables during quench. In case of external hot-spots, two different time-dynamic regimes have been observed, a slow stage for the formation of the minimum propagation zone (MPZ), and a fast dynamics once the quench is triggered and propagates to the rest of the cable. Significant local variations of the quench propagation velocity across the strands around the MPZ have been observed, but with average quench propagation velocities closely correlated with the predictions given by one-dimensional-geometry models. For quench induced by overcurrents (i.e. with applied currents higher than the critical current) the nucleation of many normal zones distributed within the cable, which overlap during quench propagation, gives a distinctive and faster quench dynamics.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Josephson critical currents in annular superconductors with Pearl vortices

  • Badía-Majós, A.
We investigate the influence of Pearl vortices in the vicinity of an edge-type Josephson junction for a superconducting thin-film loop in the form of an annulus, under uniform magnetic field. Specifically, we obtain the exact analytic formulation that allows one to describe the circulating current density and the gauge invariant phase increment ¿f across the junction. The main properties of ¿f and their influence on the critical current pattern Ic(B) are described quantitatively in terms of the loop''s width-to-radius ratio W/R and of the vortex position within the loop rv. It is shown that narrow loops (W/R<0.3) may be well described by the straight geometry limit. However, such approximation fails to predict a number of distinctive features captured by our formulation, such as the node lifting effect of the Ic(B) pattern in wide loops or the actual influence of a vortex pinned at different positions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Continuous processing of Bi2Sr2CaCu2O8+d precursor powders

  • Laliena, C.
  • Amaveda, H.
  • Özçelik, B.
  • Martínez, E.
  • de la Fuente, G.F.
  • Angurel, L.A.
A continuous solid-state process inside a roller furnace has been used to fabricate Bi-2212 powders. These powders were synthesized for their use as precursors to obtain textured monoliths by laser induced directional solidification. A thermal cycle has been defined, which depends on the length of the furnace, the prefixed temperature profile and the velocity of the sample inside the furnace. Powder properties have been studied as a function of the number of processing cycles. Phase evolution has been analyzed using X-ray diffraction, while other relevant properties of the powders, including grain size distribution, thermal behavior and temperature dependence of the AC susceptibility, have also been measured. These properties have been compared with those of commercial powders and precursors prepared using a standard solid-state protocol. Textured samples using these continuous solid-state precursors exhibit superconducting properties comparable to those similarly processed but prepared from commercial powders.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Effect of Na substitution and Ag addition on the superconducting properties of Bi-2212 textured materials

  • Özçelik, B.
  • Nane, O.
  • Sotelo, A.
  • Amaveda, H.
  • Madre, M. A.
The effect of Ag addition on the structural and superconducting properties of Bi2Sr2Ca0.925Na0.075Cu2Oy + x wt% Ag materials with x = 0, 1, 3, and 5 prepared by sol–gel method, followed by directional growth using the laser floating zone (LFZ) technique has been investigated. Powder XRD measurements demonstrate that all samples are composed by nearly single Bi-2212 phase. SEM micrographs and EDX results confirms that Bi-2212 is the major phase with minor amounts of a Bi-free one (Sr, Ca)CuO2 and metallic Ag. According to the magnetic results, Ag does not modify the superconducting critical temperature, Tc, but significantly increases the magnetic hysteresis loop area. The magnetic critical current density is maximum in the 3 wt% Ag containing samples, due to the larger grain clusters found in these samples, reaching 2.1 × 105 A/cm2 at 10 K. Moreover, Ag addition also improves the rods mechanical properties, determined by three point bending tests. The highest bending stress is also reached in the 3 wt% Ag samples.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Electromagnetic behaviour and thermal stability of a conduction-cooled, no-insulated 2G-HTS coil at intermediate temperatures

  • Cubero, A.
  • Núñez-Chico, A.B.
  • Navarro, R.
  • Angurel, L.A.
  • Martínez, E.
The electromagnetic and thermal properties of a double pancake coil made of second generation high temperature superconductor, 2G-HTS, have been studied. The coil was wound with no-insulation between turns (NI coil) and was later impregnated with epoxy resin and glued to a copper support plate. The coil was thermally anchored to the cryocooler cold finger and cooled by conduction. After several thermal cycles no degradation of its superconducting properties was observed. The coil was operated under high vacuum and high currents (up to 400 A in steady conditions) at different temperatures in the range between 5 K and 77 K, with special focus on the analysis above 30 K. The charge and discharge characteristics, and the experimentally measured and numerically estimated critical currents, have been studied. The different loss contributions during current ramp and the thermal contact conductance between different parts of the double pancake coil have been measured. The implications of these two factors on the thermal stability and the behaviour of the whole cryogenic system are discussed.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Effect of ball milling on the local magnetic flux distribution and microstructure of in situ Fe/MgB2 conductors

  • Laliena, C.
  • Qureishy, T.
  • Martínez, E.
  • Navarro, R.
  • Mikheenko, P.
  • Johansen, T.H.
  • Kovác, P.
The effects of the precursor milling energy on the superconducting and microstructural homogeneity of Fe-sheathed MgB2 monocore wires and tapes have been investigated. The conductors were produced by the powder-in-tube method using drawing and rolling deformation methods and in situ reaction. Combined magneto-optical, structural and magnetization measurements were performed on MgB2 superconducting tapes prepared from differently milled precursors revealing hidden mechanisms controlling their critical current density. Local degradation of the superconducting properties observed in some analysed conductors has been identified and correlated with microstructural observations.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Enhanced quench propagation in 2G-HTS coils co-wound with stainless steel or anodised aluminium tapes

  • Núñez-Chico, A. B.
  • Martínez, E.
  • Angurel, L. A.
  • Navarro, R.
Early quench detection and thermal stability of superconducting coils are of great relevance for practical applications. Magnets made with second generation high temperature superconducting (2G-HTS) tapes present low quench propagation velocities and therefore slow voltage development and high local temperature rises, which may cause irreversible damage. Since quench propagation depends on the anisotropy of the thermal conductivity, this may be used to achieve an improvement of the thermal stability and robustness of 2G-HTS coils. On pancake type coils, the thermal conductivity along the tapes (coil''s azimuthal direction) is mostly fixed by the 2G-HTS tape characteristics, so that the reduction of anisotropy relies on the improvement of the radial thermal conductivity, which depends on the used materials between superconducting tapes, as well as on the winding and impregnation processes. In this contribution, we have explored two possibilities for such anisotropy reduction: by using anodised aluminium or stainless steel tapes co-wound with the 2G-HTS tapes. For all the analysed coils, critical current distribution, minimum quench energy values and both tangential and radial quench propagation velocities at different temperatures and currents are reported and compared with the results of similar coils co-wound with polyimide (Kapton®) tapes.