Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 19
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Matlab-based tool for drainage network ordering by Horton and Hack hierarchies, Herramienta diseñada en Matlab para la ordenación de redes de drenaje por las jerarquías de Horton y Hack

  • Pastor-Martín, Candela
  • Antón, Loreto
  • Fernández-González, Carlos
[EN] This work presents a new MATLAB-based tool designed for network extraction and drainage network orderings by Horton and Hack hierarchies. Most GIS software offers only topological network orderings, based on joining segments, such as Stahler or Shreve, providing segments between junctions but not entire streams. Differently, Hack and Horton orderings allow organizing a drainage network in a hierarchy, identifying the parent segment over the child segment, giving as a result a drainage network where the value of a river remains unchanged from the mouth upstream to the headwater, allowing extracting entire streams. Horton and Hack hierarchies ease the interpretation of a drainage system compared to Strahler and Shreve. To extract the drainage network, this tool uses TopoToolbox 2 functions, to compute the prior steps of the channel network extraction and channel network ordering processes, and develops new functions. To sort a network, this tool allows selecting the parameter that defines the network hierarchy. This parameter is the socalled hierarchy attribute and could be the distance upstream, which refers to the distance between a junction upstream to the headwater, or the upstream accumulation, which is the accumulation at the junction. In addition to these mandatory parameters, the tool offers a set of optional parameters which turns it into a competitive alternative to generate a highly tailored ordered drainage network. The continuous channel network provided by the tool facilitates the use of other multiple applications for landscape analysis, such as the extraction longitudinal profiles or basin analysis through geomorphic indices., [ES] Este trabajo presenta una nueva herramienta diseñada en MATLAB para la extracción y ordenación de redes de drenaje por las jerarquías de Horton y Hack. La mayoría de software GIS ofrece sólo ordenaciones topológicas de redes, basadas en la unión de segmentos, como las ordenaciones de Stahler o Shreve, que proveen segmentos entre puntos de confluencia pero no canales completos. En cambio, las ordenaciones de Hack y Horton permiten organizar una red de drenaje en una jerarquía, identificando el segmento primario sobre el segmento secundario, dando como resultado una red de drenaje donde el valor de un río permanece inalterado desde la desembocadura aguas arriba hasta la cabecera. Las ordenaciones de Horton y Hack facilitan la interpretación de un sistema de drenaje comparado con Strahler y Shreve. Para extraer la red de drenaje, esta herramienta utiliza funciones de TopoToolbox 2 para calcular los pasos previos de los procesos de extracción y ordenación de la red y además desarrolla nuevas funciones. Para ordenar la red, esta herramienta permite seleccionar el parámetro que define la jerarquía de la red. Este parámetro es el llamado atributo de jerarquía que puede ser la distancia aguas arriba, que se refiere a la distancia desde el punto de confluencia a la cabecera, o la acumulación ascendente, que es la acumulación en el punto de confluencia. Además de estos parámetros obligatorios, la herramienta ofrece un conjunto de parámetros opcionales que la convierten en una alternativa competitiva para generar una red de drenaje ordenada personalizada. Esta herramienta permite generar de una red fluvial continua que es requerida en otras múltiples aplicaciones como puede ser para la extracción perfiles longitudinales y/o el análisis de cuencas a través de índices geomórficos., This work was supported by MEC under Grant PEJ2014-A-93258; by UNED under Grant GID2016-19; and it was partially funded by MITE under Grant CGL2014- 59516-P and CARESOIL S2013/MAE-2739 projects.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Outburst floods provide erodability estimates consistent with long-term landscape evolution

  • García-Castellanos, Daniel
  • O'Connor, Jim E.
Most current models for the landscape evolution over geological timescales are based on semi-empirical laws that consider riverbed incision proportional to rock erodability (dependent on lithology) and to the work performed by water flow (stream power). However, the erodability values obtained from these models are entangled with poorly known conditions of past climate and streamflow. Here we use the erosion reported for 82 outburst floods triggered by overtopping lakes as a way to estimate the outlet erodability. This avoids the common assumptions regarding past hydrology because water discharge from overtopping floods is often well constrained from geomorphological evidence along the spillway. This novel methodology yields values of erodability that show a quantitative relation to lithology similar to previous river erosion analyses, expanding the range of hydrological and temporal scales of fluvial incision models and suggesting some consistency between the mathematical formulations of long-term and catastrophic erosional mechanisms. Our results also clarify conditions leading to the runaway erosion responsible for outburst floods triggered by overtopping lakes., Funding was provided by the Spanish Government and the European Union through the projects SaltGiant (H2020 #765256), TECLA (CGL2011–26670) and MITE (CGL2014-59516) and through a Salvador de Madariaga grant (PR2011-0044)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Drainage network dynamics and knickpoint evolution in the Ebro and Duero basins: From endorheism to exorheism

  • Struth, Lucía
  • García-Castellanos, Daniel
  • Viaplana-Muzas, M.
  • Vergés Masip, Jaume
The study of fluvial network rearrangement provides a key to understand past and future landscape evolution. Large perturbations of hydrographic basins such as the change from endorheism to exorheism have repercussions in the steady or disequilibrium state of the basins and their drainage divides. Such transitions from internal to external drainage imply a major lowering of the geomorphological base level causing a major retreating knickpoint wave that separates the upstream low-relief area (inherited from the endorheic period) from the downstream incised area. Subsequently, the water divide migrates to reach an equilibrium in which erosion rates at both sides of the divide are similar. Previous fluvial analyses suggest that both the Duero and Ebro drainage networks, the two largest catchments in Iberia, experienced a change from endorheism to exorheism sometime between the Late Miocene and the Pliocene. Fluvial capture evidence argues for a Pliocene westward migration of the Ebro-Duero divide implying an area decrease for the Duero fluvial network (victim) in favor of the Ebro (aggressor). We used river profiles, knickpoint distribution and Chi-map calculation to understand the different degree of erosion of the Duero and the Ebro catchments and the dynamics of their drainage network. The results show an equilibrated Ebro drainage network in contrast with a disequilibrium in the erosional state of the Duero drainage, which remains reorganizing and adapting to the newly-imposed Atlantic base level. We identified at least two knickpoint wave trains in the Duero drainage resulting from the onset of exorheism: a fast-propagating wave through the cover and a low-propagating wave affecting the bedrock. Field evidence and topographic analysis suggest a westward migration of the Ebro-Duero divide, resulting in an ongoing headward erosion of the Ebro against the Duero catchment. Chi analysis provides the degree of disequilibrium of the drainage network indicating a large-scale aggressor role for the Duero and a victim role for the Ebro. We interpreted this seeming contradiction as the result of a different time scale perspective: local divide observations indicate a victim Duero in the short-term, whereas basin-scale dynamics support a victim role for the Ebro fluvial network in the long-term (multi-million-year time-scales). © 2018 Elsevier B.V., This work was supported by MITE (CGL2014-59516), SUBTETIS (PIE-CSIC-201830E039) and ALPIMED (PIE-CSIC-201530E082) projects., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Evidence of Segmentation in the Iberia–Africa Plate Boundary: A Jurassic Heritage?

  • Fernández Ortiga, Manel
  • Torné, Montserrat
  • Vergés Masip, Jaume
  • Casciello, Emilio
  • Macchiavelli, Chiara
The present structure of the Iberia–Africa plate boundary between the Gorringe Bank and the Algerian Basin is characterized by a highly segmented geometry and diffused seismicity. Filtered Bouguer gravity data show conspicuous highs coinciding with the Gorringe Bank, the Guadalquivir–Portimao Bank, and the Ronda/Beni–Bousera massifs, reflecting the current geometry of the plate boundary segments. The Africa–Eurasia Alpine convergence produced crustal-scale thrusting in the Atlantic segments and roll-back subduction in the Ligurian–Tethys segments. Despite the growing consensus that the Gorringe and the Guadalquivir–Portimao Banks resulted from tectonic inversion of hyperextended margin structures inherited from the Early Jurassic, this heritage is more debatable for the Ronda/Beni–Bousera massifs lacking models linking the Atlantic and Mediterranean realms. On the basis of gravity analysis combined with plate reconstruction models, geological cross-sections, and recent local tomography, we infer a strong Jurassic heritage of the present-day segmentation and substantiate a comprehensive tectonic evolution model of the Iberia–Africa plate boundary since the Early Jurassic to Recent that includes the Atlantic and the Mediterranean domains., This research was funded by the Consejo Superior de Investigaciones Científicas, grant number ALPIMED-CSIC-201530E082 and by the Agencia Estatal de Investigación, grant number MITE-CGL2014-59516-P., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Endorheic-Exorheic Transitions of the Rio Grande and East African Rifts

  • Berry, M.
  • Van Wijk, J.
  • Cadol, D.
  • Emry, E.
  • García-Castellanos, Daniel
Tectonic extension of continental lithosphere creates accommodation space in which sediments are deposited. Climate-driven processes provide the mechanism by which mass is detached from hillslopes and sediments are transported into this accommodation space. These two forcings, climate and tectonics, act together to create either endorheic (internally drained) or exorheic (externally drained) rift basins. Here we use a large-scale dynamic landscape evolution-tectonics model to understand the contribution of tectonic processes in endorheic-exorheic transitions. In the model, extension results in opening of an asymmetric half-graben along a listric normal fault. Rift opening occurs in the models in wet, temperate, or semiarid climates where runoff and evapotranspiration are varied. Our numerical experiments show that slow rift-opening rates, a slowing-down of rift opening, or increase of headwater topography (e.g., upstream epeirogenic uplift), are tectonic situations that can cause a transition from an endorheic to an exorheic drainage state in a rift basin. Our results also show that wet climate conditions lead to a permanent exorheism that persists regardless of rift-opening rates. In semiarid climates, endorheic conditions are favored and may last for the duration of rifting except for when rift opening is very slow. These results form an interpretive framework to study endorheic and exorheic drainage systems in natural continental rifts. In the slow-opening Rio Grande rift, the endorheic-exorheic transition may have occurred without dramatic climate changes. Lake-level variations in East African rift basins are predicted by our models to result from variations in climate. ©2019. American Geophysical Union. All Rights Reserved., This research was supported by NSF-EAR-1516680, and Spanish Government project MITE (CGL2014-59516)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Deep Seated Density Anomalies Across the Iberia-Africa Plate Boundary and Its Topographic Response

  • Jimenez-Munt, Ivone
  • Torné, Montserrat
  • Fernández Ortiga, Manel
  • Vergés Masip, Jaume
  • Kumar, Ajay
  • Carballo, Arkaitz
  • García-Castellanos, Daniel
The modes in which the lithosphere deforms during continental collision and the mechanisms involved are not well understood. While continental subduction and mantle delamination are often invoked in tectonophysical studies, these processes are difficult to be confirmed in more complex tectonic regions such as the Gibraltar Arc. We study the present-day density and compositional structure of the lithosphere along a transect running from South Iberia to North Africa crossing the western Gibraltar Arc. This region is located in the westernmost continental segment of the African-Eurasian plates, characterized by a diffuse transpressive plate boundary. An integrated and self-consistent geophysical-petrological methodology is used to model the lithosphere structure variations and the thermophysical properties of the upper mantle. The crustal structure is mainly constrained by seismic experiments and geological data, whereas the composition of the lithospheric mantle is constrained by xenolith data. The results show large lateral variations in the topography of the lithosphere-asthenosphere boundary. We distinguish different chemical lithospheric mantle domains that reproduce the main trends of the geophysical observables and the modeled P and S wave seismic velocities. A sublithospheric body colder than the surrounding mantle is needed beneath the Betics-Rif to adjust the measured potential fields. We link this body to the Iberian slab localized just to the east of the profile and having some effect on the geoid and Bouguer anomalies. Local isostasy allows explaining most of the topography, but an elastic thickness higher than 10 km is needed to explain local misfits between the Atlas and the Rif Mountains., Funding was granted by the Spanish Government through the project MITE (CGL2014‐59516‐P) and projects Alpimed (PIE‐CSIC‐201530E082) and Subtetis (PIE‐CSIC‐201830E039). A. C. benefitted from a JAE‐Pre‐CP grant from CSIC. A. K. benefitted from EU Marie Curie Initial Training Network “SUBITOP” (674899‐SUBITOP‐H2020‐MSCA‐ITN‐2015)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The Zanclean megaflood of the Mediterranean – Searching for independent evidence

  • García-Castellanos, Daniel
  • Micallef, Aaron
  • Estrada, Ferran
  • Camerlenghi, Angelo
  • Ercilla, Gemma
  • Periáñez, R.
  • Abril-Hernández, José María
About six million years ago, the Mediterranean Sea underwent a period of isolation from the ocean and widespread salt deposition known as the Messinian Salinity Crisis (MSC), allegedly leading to a kilometer-scale level drawdown by evaporation. One of the competing scenarios proposed for the termination of this environmental crisis 5.3 million years ago consists of a megaflooding event refilling the Mediterranean Sea through the Strait of Gibraltar: the Zanclean flood. The main evidence supporting this hypothesis is a nearly 390 km long and several hundred meters deep erosion channel extending from the Gulf of Cádiz (Atlantic Ocean) to the Algerian Basin (Western Mediterranean), implying the excavation of ca. 1000 km3 of Miocene sediment and bedrock. Based on the understanding obtained from Pleistocene onshore megaflooding events and using ad-hoc hydrodynamic modeling, here we explore two predictions of the Zanclean outburst flood hypothesis: 1) The formation of similar erosion features at sills communicating sub-basins within the Mediterranean Sea, specifically at the Sicily Sill; and 2) the accumulation of the eroded materials as megaflood deposits in areas of low flow energy. Recent data show a 6-km-wide amphitheater-shaped canyon preserved at the Malta Escarpment that may represent the erosional expression of the Zanclean flood after filling the western Mediterranean and spilling into the Eastern Basin. Next to that canyon, a ~1600 km3 accumulation of chaotic, seismically transparent sediment has been found in the Ionian Sea, compatible in age and facies with megaflood deposits. Another candidate megaflood deposit has been identified in the Alborán Sea in the form of elongated sedimentary bodies that parallel the flooding channel and are seismically characterized by chaotic and discontinuous stratified reflections, that we interpret as equivalent to gravel and boulder megabars described in terrestrial megaflood settings. Numerical model predictions show that sand deposits found at the Miocene/Pliocene (M/P) boundary in ODP sites 974 and 975 (South Balearic and Tyrrhenian seas) are consistent with suspension transport from the Strait of Gibraltar during a flooding event at a peak water discharge of ~108 m3 s−1. © 2019 The Authors, Funding has been provided by the COST Action Medsalt CA15103 , by the ETN SaltGiant ( European Union funded , Horizon2020 , Marie Skłodowska-Curie grant agreement No 765256 and 674899 ) and by the Spanish public projects MITE ( CGL2014-59516 ) FAUCES ( CMT2015-65461-C2-R , MINECO / FEDER ) and DAMAGE (AEI/FEDER CGL2016-80687-R )., With the funding support of the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000928-S), of the Spanish Research Agency (AEI), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A GIS method to identify flat surfaces and restorerelict fluvial long-profiles from terrace remnantsgives new clues on how large basins respond toendorheic–exorheic transitions (Duero basin,Iberian Peninsula)

  • Rodríguez-Rodríguez, Laura
  • Antón, Loreto
  • Pallàs, Raimon
  • García-Castellanos, Daniel
  • Jimenez-Munt, Ivone
  • Pastor-Martín, C.
Fluvial terraces are used as geomorphic indicators for deciphering long-term landscape evolution. Knowing the distribution of fluvial terraces is essential for establishing former river profiles and their tectonic significance, for studying climate-modulated processes of terrace development, or for defining fluvial network adjustments in response to sudden base-level changes like those produced by fluvial captures. Multiple methods for automatic map production have been proposed based on the comparison of morphometric indices with those of the modern river course. Here we propose an alternative method to identify flat surfaces and scarps separating them from digital elevation models without setting comparisons with a modern river course and thus fully applicable to study flat landforms whatever their origin. Its application to the low-relief landscape of the Cenozoic Duero basin has allowed the improvement of previous geomorphological maps and the analysis of fluvial network adjustments in response to a sudden base-level fall after the opening of the Neogene endorheic basin towards the Atlantic Ocean. Reconstructed terrace long-profiles suggest an initial episode of fast vertical incision followed by a period of repeated planation–aggradation–incision with the formation of 14 to 13 unpaired terrace levels. Changes observed in the pattern of terrace profiles are discussed with regard to changes in regional tectonics and base-level variations. © 2019 John Wiley & Sons, Ltd. © 2019 John Wiley & Sons, Ltd., This is an MITE contribution (Spanish Government Plan Estatal de Investigación Científica y Técnica y de Innovación, CGL2014‐59516 & PR2011‐0044); GIS technical support was funded by the Spanish Ministerio de Economía y Competitividad under Grant PEJ‐2014‐A‐93258. LRR is funded by the Marie Curie–Clarín COFUND programme (reference ACA‐17‐19; FICYT–Principality of Asturias)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

A detailed crust to upper mantle structure: Comparison between Algerian and Alboran domains in the Western Mediterranean.

  • Kumar, Ajay
  • Fernández Ortiga, Manel
  • Vergés Masip, Jaume
  • Torné, Montserrat
  • Jimenez-Munt, Ivone
EGU General Assembly 2019, in Viena, Austria, 7–12 April 2019, We present a comparison of the present-day crust to upper-mantle (400km) structure in the Western Mediterranean along two NW-SE oriented transects in the Alboran and Algerian domains. The Alboran domain transect crosses the Betics, the Alboran Basin, and the northern margin of Africa between the Tell and Rif mountains. The Algerian domain transect crosses Valencia Trough, the Balearic Promontory, the Algerian basin and ends in the Tell-Atlas Mountains in the northern margin of Africa. We model the thermal, compositional, density and seismic velocity structure, also incorporating slabs imaged by seismic tomography using recently updated version of the LitMod2D, an integrated geophysical-petrological modelling tool. LitMod2D combines data from petrology, geochemistry and geophysics in a self-consistent thermodynamic framework. The resulting structure is constrained by simultaneously fitting elevation, gravity, geoid and surface heat flow to reduce the uncertainties in the modelling. Further, we calculate synthetic receiver functions and surface wave dispersion curves from our velocity model. We do this to circumvent non-uniqueness of seismic tomography models and directly compare the prediction from our velocity model with the observed seismological data. Preliminary results suggest that crust is thickest beneath the Betics and thins beneath the Alboran basin within a distance of ~100 km. Farther SE, crust gradually thickens beneath the north margin of Africa, between Tell and Rif mountains over ~300 km distance. The LAB shows a similar trend though affected by the presence of the slab underneath Betics. For the Algerian domain transect, maximum crustal thickness occurs beneath the Tell-Atlas Mountains with noticeable variations across the Algerian basin, Balearic Promontory and Valencia Trough, the LAB showing a similar tendency. Comparing the modelled geometries suggests that both transects have opposite trends with the deepest Moho and LAB in the NW side of the Alboran domain transect and in the SE side of the Algerian domain transect, imposing important constrains on the geodynamic evolution of the Western Mediterranean., This is a SUBITOP (674899-SUBITOP-H2020-MSCA-ITN-2015) and MITE (CGL2014-59516) contribution
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Dependence of lithospheric slab buoyancy on composition and convergence rate: insights from a thermally-coupled kinematic model

  • Boonma, Kittiphon
  • Kumar, Ajay
  • García-Castellanos, Daniel
  • Jimenez-Munt, Ivone
  • Fernández Ortiga, Manel
EGU General Assembly 2019, in Viena, Austria, 7–12 April 2019, The buoyancy of the lithospheric mantle relative to the asthenospheric mantle is the driving force of plate subduction and mantle delamination (the peeling off of the lithospheric mantle from the crust and its detachment and sinking into the asthenospheric mantle). Both mechanisms are often invoked for the evolution of collision zones, yet there are still open questions about the conditions under which they take place. The higher density of the lithosphere relative to the asthenosphere is thought to lead to subduction or delamination as it sinks. However, it is true only when the densities are temperature dependent. We adopt a mineral physics viewpoint where the density depends on temperature, pressure, and composition such that lithospheric mantle can be less dense than that of the underlying asthenosphere, posing a severe problem for the initiation of delamination. The density and its pressure-temperature dependence, in the lithosphere and asthenosphere, are calculated from stable mineral assemblages computed using major oxides composition based on mantle xenoliths/garnet peridotites in the (CFMAS) framework.We present a parametric study on the relationship between slab buoyancy and convergence rate using a simple 2D kinematic numerical model, incorporating thermal advection and diffusion. We consider different types of the lithospheric mantle (e.g. Archon, Tecton, Proton, and Oceanic), subducting with different convergence rate and constant angle, into the asthenosphere. Our results suggest that Oceanic, Tecton and Proton lithospheres are always negatively buoyant and maximum negative buoyancy increases with the convergence velocity whereas Archons are always positively buoyant. In case of oceanic lithosphere maximum negative buoyancy also increases with its age for a given velocity., This is a SUBITOP (674899-SUBITOP-H2020-MSCA-ITN-2015) and MITE (CGL2014-59516) contribution.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Thermomechanical 2D model for a lithosphere transect of North Iberia: reconciling theories of its Cenozoic geodynamic evolution.

  • Valverde, Ángel
  • García-Castellanos, Daniel
  • Jimenez-Munt, Ivone
  • Fernández Ortiga, Manel
  • Vergés Masip, Jaume
  • Moresi, L. N.
  • Farrington, R. J.
EGU General Assembly 2019, in Viena, Austria, 7–12 April 2019, We investigate the influence of the rheology of the lithosphere and inherited weak zones on the transmission of stresses in a N-S oriented transect for the Iberian Peninsula crossing the Central System, Duero Basin and the Cantabrian Range. The Iberian Peninsula was an independent microplate that has been deformed by the convergence between the Eurasian and African plates for the last 65 My. During this tectonic compression, the intraplate mountain range Central System uplifted. Previous studies suggest distinct ways of stress transmission in intraplate deformation such us lithosphere folding or mid-crustal detachment levels. The controversy comes on the distribution of the crustal shortenings in the different areas of the transect and how the crustal deformation accommodates according to those shortenings. Another enigma is the high overall elevation of the Iberian Peninsula compared to the mean topography of Europe. In this study, we perform some thermomechanical models varying rheologies and including weak parts inherited from the Variscan orogeny. We aim to explain the different shortenings, geostructural interpretation and lithosphere asthenosphere boundary from previous studies, by numerical modeling. The transect incorporates a 30 My old oceanic crust in the Bay of Biscay, a weak zone down into the upper mantle on the continental and oceanic transition part, and two faults with a different angle at both sides of the Central System which is a granitoid block. The adopted rheology consists of a power law creep, including diffusion and dislocation, in which viscosities decrease due to a plastic criterion that follows the Byerlee’s law. To simulate deformation, we use Underworld-II, a particle-in-cell finite element code applied to large-scale geodynamics simulations. Results show the importance of inherited weak zones to explain the grown of the Central system as a pop-up structure and for mid-lower crustal subduction below the Cantabrian Range. They show the relevance of a mid-detachment level transferring strain rate to the Central System. Our models present high mean absolute topography comparable to the actual Iberian relief in the transect of our study as a result of the density distribution applied., This work is part of the projects MITE (CGL2014-59516-P) and SUBITOP (H2020-MSCA-ITN-2015-674899). We also thank the Barcelona Supercomputing centre (BSC-CNS) for their support to projects AECT-2018-3-0008 & AECT-2018-1-0007
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Deep Seated Density Anomalies Across the Iberia¿Africa Plate Boundary and Its Topographic Response

  • Jimenez-Munt, Ivone
  • Torné, Montserrat
  • Fernández Ortiga, Manel
  • Vergés Masip, Jaume
  • Kumar, Ajay
  • Carballo, Alberto
  • García-Castellanos, Daniel
The modes in which the lithosphere deforms during continental collision and the mechanisms involved are not well understood. While continental subduction and mantle delamination are often invoked in tectonophysical studies, these processes are difficult to be confirmed in more complex tectonic regions such as the Gibraltar Arc. We study the present¿day density and compositional structure of the lithosphere along a transect running from South Iberia to North Africa crossing the western Gibraltar Arc. This region is located in the westernmost continental segment of the African¿Eurasian plates, characterized by a diffuse transpressive plate boundary. An integrated and self¿consistent geophysical¿petrological methodology is used to model the lithosphere structure variations and the thermophysical properties of the upper mantle. The crustal structure is mainly constrained by seismic experiments and geological data, whereas the composition of the lithospheric mantle is constrained by xenolith data. The results show large lateral variations in the topography of the lithosphere¿asthenosphere boundary. We distinguish different chemical lithospheric mantle domains that reproduce the main trends of the geophysical observables and the modeled P and S wave seismic velocities. A sublithospheric body colder than the surrounding mantle is needed beneath the Betics¿Rif to adjust the measured potential fields. We link this body to the Iberian slab localized just to the east of the profile and having some effect on the geoid and Bouguer anomalies. Local isostasy allows explaining most of the topography, but an elastic thickness higher than 10 km is needed to explain local misfits between the Atlas and the Rif Mountains., Funding was granted by the Spanish Government through the project MITE (CGL2014‐59516‐P) and projects Alpimed (PIE‐CSIC‐201530E082) and Subtetis (PIE‐CSIC‐201830E039). A. C. benefitted from a JAE‐Pre‐CP grant from CSIC. A. K. benefitted from EU Marie Curie Initial Training Network “SUBITOP” (674899‐SUBITOP‐H2020‐MSCA‐ITN‐2015).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

LitMod2D_2.0: An Improved Integrated Geophysical-Petrological Modeling Tool for the Physical Interpretation of Upper Mantle Anomalies

  • Kumar, Ajay
  • Fernández Ortiga, Manel
  • Jimenez-Munt, Ivone
  • Torné, Montserrat
  • Vergés Masip, Jaume
  • Afonso, Juan Carlos
LitMod2D_2.0 can be downloaded from https://doi.org/10.20350/digitalCSIC/9063 or GitHub https://github.com/ajay6763/LitMod2D_2.0_package_dist_users., LitMod2D integrates geophysical and petrological data sets to produce the thermal, density, and seismic velocity structure of the lithosphere and upper mantle. We present a new LitMod2D_2.0 package with improvements focused on (i) updated anelastic attenuation correction for anharmonic seismic velocities, (ii) chemical composition in the sublithospheric mantle, and (iii) incorporation of sublithospheric mantle anomalies. Sublithospheric mantle anomalies can be defined with different chemical composition, temperature, seismic velocities, and a combination of them, allowing the application of LitMod2D_2.0 to regions affected by mantle upwelling, subduction, delamination, and metasomatism. We demonstrate the potential application of LitMod2D_2.0 to such regions and the sensitivity of thermal and compositional anomalies on density and seismic velocities through synthetic models. Results show nonlinearity between the sign of thermal and seismic velocity anomalies, and that S wave velocities are more sensitive to temperature whereas P wave velocities are to composition. In a synthetic example of subduction, we show the sensitivity of sublithospheric mantle anomalies associated with the slab and the corner flow on surface observables (elevation, geoid height, and gravity anomalies). A new open-source graphic user interface is incorporated in the new package. The output of the code is simplified by writing only the relevant physical parameters (temperature, pressure, material type, density, and seismic velocities) to allow the user using predefined post-processing codes from a toolbox (flexure, mineral assemblages, synthetic passive seismological data, and tomography) or designing new ones. We demonstrate a post-processing example calculating synthetic seismic tomography, Rayleigh surface-wave dispersion curves, and P wave receiver functions from the output file of LitMod2D_2.0. © 2020. The Authors., This work has been supported by EU Marie Curie Initial Training Network (SUBITOP) (674899-SUBITOP-H2020-MSCA-ITN-2015), the Agencia Estatal de Investigación through projects MITE (CGL2014-59516) and GeoCAM (PGC2018-095154-B-100), and the Agency for Management of University and Research Grants of Catalonia (AGAUR-2017-SGR-847). Thermodynamic databases used can be found in cited references (Afonso & Zlotnik,?2011; Stixrude & Lithgow-Bertelloni,; Xu et al.,). We thank two anonymous reviwers for insightful comments and suggestions on an earlier version of this manuscript. We also thank F. Salajeghegh for sharing his GUI matlab routines. This work has been done using the facilities of the Laboratory of Geodynamic Modeling from ICTJA-CSIC. JCA's work is supported by ARC Linkage Project LP170100233 and ARC Discovery Project DP190102940. LitMod2D_2.0 can be downloaded from https://doi.org/10.20350/digitalCSIC/9063 or GitHub https://github.com/ajay6763/LitMod2D_2.0_package_dist_users., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Comparison of the crust and upper mantle structure of the Alboran and Algerian domains (Western Mediterranean): Tectonic significance

  • Kumar, Ajay
  • Fernández Ortiga, Manel
  • Vergés Masip, Jaume
  • Torné, Montserrat
  • Jimenez-Munt, Ivone
EGU General Assembly 2020 Online, 4-8 May 2020, We present a comparison of the present-day crust to upper-mantle structure in the Western Mediterranean along two NW-SE oriented geo-transects in the Alboran and Algerian basins. The Alboran domain geo-transect traverses the Iberian Massif, the Betics, the Alboran Basin and ends in the northern margin of Africa between the Tell and Rif mountains. The Algerian domain geo-transect traverses the Catalan Coast Ranges, the Valencia Trough, the Balearic Promontory, the Algerian basin, the Greater Kabylies and ends in the Tell-Atlas Mountains in the northern margin of Africa. We model the thermal, density (i.e. compositional) and seismic velocity structure by integrating geophysical and geochemical dataset in a self-consistent thermodynamic framework. The crustal structure is constrained by seismic experiments and geological cross-sections, whereas seismic tomography models and mantle xenoliths constrain the upper mantle structure and composition. The Algerian Basin lithosphere shows a typical oceanic lithosphere composition, whereas the Alboran Basin lithosphere is slightly fertile. The lithospheric mantle beneath the Betics and Greater Kabylies are also fertile compared to the Iberian and African lithospheres showing the involvement of the fertile sublithosphere mantle during the later stages of subduction. In the Valencia Trough, the lithosphere is fertile in comparison to the Balearic Promontory lithosphere, which is similar to Iberian lithosphere. A lithosphere-scale thickening is observed in the Betics, and the Greater Kabylies, and thinning follows towards the Alboran and Algerian back-arc basins. Detached slabs with anomalous temperature of-320 oC, with oceanic lithosphere composition beneath the Greater Kabylies, and Iberian lithosphere composition beneath the Betics, are required to fit the geoid height. Our results impose important constraints for the geodynamic evolution models of the Western Mediterranean., This work has been supported by SUBTETIS (PIE-201830E039) project, EU Marie Curie Initial Training Network `SUBITOP¿ (674899-SUBITOP-H2020-MSCA-ITN-2015), the Agencia Estatal de Investigación through projects MITE (CGL2014-59516) and GeoCAM (PGC2018-095154-B-100), and the Agency for Management of University and Research Grants of Catalonia (AGAUR-2017-SGR-847).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Deep seated density anomalies across the Iberia-Africa plate boundary and its topographic response

  • Jimenez-Munt, Ivone
  • Torné, Montserrat
  • Fernández Ortiga, Manel
  • Vergés Masip, Jaume
  • Kumar, Ajay
  • Carballo, Alberto
  • García-Castellanos, Daniel
EGU2020: Sharing Geoscience Online, 4-8 May 2020, The modes in which the lithosphere deforms during continental collision and the mechanisms involved are not well understood. While continental subduction and mantle delamination are often invoked in tectonophysical studies, these processes are difficult to be confirmed in more complex tectonic regions such as the Gibraltar Arc. We study the present-day density and compositional structure of the lithosphere along a transect running from S Iberia to N Africa crossing the western Gibraltar Arc. This region is located in the westernmost continental segment of the African-Eurasian plates, characterized by a diffuse transpressive plate boundary. An integrated and self-consistent geophysical-petrological methodology is used to model the lithosphere structure variations and the thermophysical properties of the upper mantle. The crustal structure is mainly constrained by seismic experiments and geological data, whereas the composition of the lithospheric mantle is constrained by xenolith data. The results show large lateral variations in the topography of the lithosphere-asthenosphere boundary (LAB). We distinguish different chemical lithospheric mantle domains that reproduce the main trends of the geophysical observables and the modelled P- and S-wave seismic velocities. A sublithospheric body colder than the surrounding mantle is needed beneath the Betics-Rif to adjust the measured potential fields. We link this body to the Iberian slab localized just to the east of the profile and having some effect on the geoid and Bouguer anomalies. Local isostasy allows explaining most of the topography, but an elastic thickness higher than 10 km is needed to explain local misfits between the Atlas and the Rif Mountains., This work has been supported by Spanish Ministry by the projects MITE (CGL2014-59516) and GeoCAM (PGC2018-095154-B-100).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dates and rates of endo-exorheic drainage development: Insights from fluvial terraces (Duero River, Iberian Peninsula)

  • Rodríguez-López, Laura
  • Antón, Loreto
  • Rodés, A.
  • Pallàs, Raimon
  • García-Castellanos, Daniel
  • Jimenez-Munt, Ivone
  • Struth, Lucía
  • Léanni, Laëtitia
  • Aumaître, G.
  • Bourlès, D.
  • Keddadouche, K.
Fluvial terraces are valuable records to study and characterize landscape evolution and river response to base level lowering, and to decipher coupled responses between fluvial incision and regional tectonics. The opening of closed basins has a strong impact on fluvial dynamics, as it involves an abrupt base level lowering that accelerates landscape fluvial dissection. This study focuses on the time response of the Duero Basin, the largest and best preserved among the Cenozoic basins of the Iberian Peninsula, to exorheism. Fluvial incision due to basin opening has developed up to 13 un-paired strath terraces along the south margin of the Duero river, distributed at relative heights up to +136–128 m compared to the modern floodplain. Paired 10Be–26Al cosmogenic isotope depth profiles from six fluvial terraces, located ca. 30–80 km upstream from the opening zone, suggest Pleistocene ages for almost the entire fluvial terrace staircase (from T3 at +112 –107 m, to T12 at +13–11 m). The terrace density and the total lowering of the terrace surface, key parameters in limiting terrace exposure ages, were estimated based on field and geomorphological data. Apparent burial durations and basin denudation rates deduced from inherited 10Be–26Al concentrations provide valuable information on basin evolution. Apparent basin denudation rates remained relatively low (<3–6 m·Ma−1) during the Pliocene, and doubled (8–13 m·Ma−1) during the Early Pleistocene (ca. 2–1 Ma) possibly showing a lower proportion of recycled sediments. Time averaged incision rates deduced from terraces in the study area and along some tributaries show that incision rates are higher close to the opening site (122–<250 m·Ma−1) than towards the upstream part of the catchment (88–68 m·Ma−1), evidencing the retrogressive travel of the erosive wave nucleated at the opening site. © 2020 Elsevier B.V., This is a MITE project contribution, funded by the Spanish Ministry of Science and Innovation ( Plan Estatal de Investigación Científica y Técnica y de Innovación ; Ref. CGL2014-59516 and PR2011-0044 ). At the time of paper writing, L. Rodríguez-Rodríguez was recipient of an outgoing post-doctoral grant of the Clarín-Cofund program (Ref. ACA-17-19), financed jointly by the regional government of Principality of Asturias and the 7th WP of the European Union–Marie Curie Actions . The ASTER AMS national facility (CEREGE, Aix en Provence) is supported by the INSU/CNRS , the ANR through the “Projets thématiques d'excellence” program for the “Equipements d'excellence” ASTER-CEREGE action and IRD. Candela Pastor-Martín is thanked for providing GIS technical support (funded by the Spanish Ministry of Economy and Competitiveness under grant PEJ-2014-A-93258 )., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

LithBuoy: a software to model the lithospheric buoyancy

  • Boonma, Kittiphon
  • Kumar, Ajay
  • García-Castellanos, Daniel
  • Jimenez-Munt, Ivone
  • Fernández Ortiga, Manuel
Más información: https://github.com/kboonma/LithBuoy, Más información: https://zenodo.org/record/4637902#.YHaZ3egzZPY, Contacto: Boonma, Kittiphon, kittiphon.b@gmail.com, LithBuoy is a 2D thermal-diffusive model of plate convergence. It is a finite-difference forward modelling approach code. The software is suitable for those who want to study the effect of pressure-temperature-mantle composition and convergence rate on the buoyancy of a lithospheric mantle. Currently, the software is equiped with a mantle database consisting of five chemical compositions and tectonothermal ages, namely Archon (>2.5 Ga), Proton (2.5–1.0 Ga), Tecton (<1.0 Ga), and two oceanic lithospheric plates of 30 Ma and 120 Ma. This database can be modified as needed., EU Horizon2020 EU Marie Curie Initial Training Network ‘SUBITOP’ 674899-SUBITOP-H2020-MSCA-ITN-2015 SUBITOP ITN; Spanish Government national research program Spanish Government national research program CGL2014-59516 MITE, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis doctoral (DoctoralThesis)

Numerical modeling of continental collision and intraplate deformation. Application to the Cenozoic geodynamic evolution of North Iberia

  • Valverde Perez, Angel
This thesis aims at improving the current understanding of the geodynamic controls on tectonic deformation during plate collision, using the Cenozoic evolution of Iberia as a case scenario. Despite the vast efforts during the last decades, there is a limited understanding today about what plate properties control the propagation of tectonic deformation towards the interior of tectonic plates. Meanwhile, the classic enigmas about the timing and the processes involved in the construction of the Iberian topography also persist: What is the origin of the high average elevation of the Iberian Peninsula? What is the quantitative contribution to topography induced by the intraplate tectonics of Iberia? How was this intraplate deformation in the middle of the Iberian microplate triggered? To answer these questions, I first gathered information about the tectonic events in Iberia during the Cenozoic from previous structural tectonic and geodynamic modelling publications. Continental collision with Eurasia in the north first gave rise to the uprising of the Pyrenean and Basque-Cantabrian chains. Deformation subsequently jumped southwards and formed the elevation of the interior mountain ranges. Meanwhile in the southern margin, the subduction of the Tethys oceanic lithosphere due to the Africa-Iberia convergence gave rise to the Betics and opened the Alborán Sea. The underlaying hypothesis of this thesis is that this succession can be reproduced via a geodynamic model giving the appropriate initial conditions that are in reasonable agreement with the geological setting during the early-Cenozoic Iberia. To this purpose, we carried out a series of high-resolution mechanical and thermomechanical numerical models with a state-of-the-art code named UNDERWORLD 2.0 (still under development at Univ. Melbourne). We first review fundamental ideas such as the patterns of deformation of the lithosphere predicted for converging continental margins, as well as the elevation of mountain ranges in a continental collision scenario. Then we investigate how the crustal deformation accommodates far from the continental margins, taking into account the mathematical equations and physical laws that govern the thermal field and rock deformation. Based on these, a series of mechanical numerical models are developed to explore the possible evolutionary scenarios after a continental collision. Two deformation end member models appear: double-vergence and crustal folding. While in the first one deformation concentrates near the axial collision zone where the orogen develops, in the second, deformation is transmitted farther from the initial contact between lithospheres. We compare these results with patterns of deformation seen in the Pyrenean mountain range as well as other natural scenarios where cortical folding occurs near a thrust failure like in the Zagros Chain in Iran., La presente tesis doctoral aborda el estudio de la evolución geodinámica de sistemas de colisión continental, usando como escenario de referencia la microplaca de Iberia durante el Cenozoico (últimos 65 millones de años). Pese al enorme esfuerzo acumulado por la comunidad geológica en este ámbito, los enigmas clásicos sobre la cronología y los procesos involucrados en la construcción del relieve y el subsuelo ibéricos persisten: ¿Cuál es el origen de la elevada topografía media de la Península? ¿Cómo ha sido construida su actual topografía como resultado de la peculiar posición de la microplaca tectónica de Iberia entre África y Eurasia? Para abordar estas preguntas, he recopilado información de estudios previos sobre episodios tectónicos desde el Cretácico Superior hasta la actualidad con especial atención a los intervalos relacionados con el choque continental con Eurasia que dio lugar al levantamiento de la cadena Pirenaica y Vasco-Cantábrica, la posterior elevación de las cadenas montañosas del interior y la posterior evolución del margen sur en relación con la aproximación entre África e Iberia. Para encontrar los mecanismos responsables de esta evolución, he diseñado una serie de modelos numéricos de alta resolución que simulan en 2D la deformación de la litosfera en límites de placa convergentes, utilizando uno de los programarios más evolucionados de la geodinámica internacional (Underworld 2.0; Univ. Melbourne). Este volumen empieza por tanto explicando las ecuaciones matemáticas y leyes físicas que gobiernan el modelo numérico, las relaciones entre los parámetros físicos y su importancia y sus limitaciones. Así, se han realizado una serie de modelos numéricos sintéticos en esta tesis para identificar los posibles escenarios evolutivos tras un choque continental donde aparecen dos modelos de deformación: doble vergencia y plegamiento cortical. Mientras que en el primero la deformación se concentra en torno a la zona de colisión donde se desarrolla un orógeno mediante fallas que buzan hacia la zona axial, en el segundo se transmite la deformación más lejos de la zona de colisión., This thesis is part of the project MITE (CGL2014-59516) financed by the CSIC. I also thank to the projects AECT-2017-1-0018, AECT-2017-2-00013, AECT- 2017-3-0008, AECT-2018-1-0007, AECT-2018-3-0007, AECT-2019-1-0013 and AECT-2019-2-0005 for allowing me to use the computational resources from the RES (Red Española de Supercompatución) and specially to the Barcelona Supercomputing Center (BSC - CNS). This thesis was part of the national founding from the Ministry of Economy and competitiveness: Programa Estatal de promoción de Talento y su Competitividad I+D+i, ayudas para contratos predoctorales para la formación de doctores 2015 (BES - 2015 - 073348).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis doctoral (DoctoralThesis)

Geodynamic modelling of lithosphere subduction and the topographic response to slab tearing. Application to the Gibraltar Arc.

  • Boonma, Kittiphon
Lithospheric slab tearing, the process by which a subducted lithospheric plate is torn apart and sinks into the Earth’s mantle, has been proposed as a cause of significant surface vertical motions. Although this has been linked to the change implied in the isostatic balance in subduction zones, little is known about the mechanisms and rock properties determining the tear propagation and the uplift-subsidence rates involved. This thesis aims to explore the link between the tearing of subducted lithospheric slabs and the associated vertical motions. To this purpose, I first explore the mechanisms controlling the buoyancy of a subducted lithosphere and then, with this understanding, numerically simulate the process of lithospheric tearing upon continental collision, using the Betic Cordillera as a reference scenario where such tearing-uplift interaction has been proposed for this region. With a mineral-physics approach, where a lithospheric mantle can be less dense than the underlying asthenosphere, I explore the controls on lithospheric buoyancy using a 2D thermal- diffusive model of plate convergence. Five chemical compositions and tectonothermal ages were considered, namely Archon (> 2.5 Ga), Proton ( 2.5 − 1.0 Ga), Tecton (< 1.0 Ga), and two oceanic lithospheric plates of 30 Ma and 120 Ma. While the advection of colder rock in oceanic-like plates always results in negative buoyancy, Protons and Tectons exhibit an ability to slowly flip from negative to positive buoyancy at low convergence rates: they first favour the sinking due to advection and then become more buoyant because they are thinner and heat up faster during subduction. In contrast, the lighter density of cratons (Archons) overprints this effect and hinders delamination or subduction, regardless of the convergence rate. This may explain why Archons are more stable during the Wilson Cycle Having gained these insights into the role of lithospheric buoyancy in subduction settings, I then set to explore the characteristics surrounding lithospheric slab tearing and the asso- ciated surface uplift. I used 3D thermo-mechanical numerical modelling to investigate the geodynamic parameters affecting the slab-tearing initiation and its lateral propagation, and to quantify the corresponding surface vertical motions. The Betics-inspired model suggests x that the obliquity of the continental passive margin (relative to the trench axis) is a major influence on the initiation of slab tearing because it promotes a laterally diachronous conti- nental collision which leads to slab tearing. The model illustrates an east-to-west slab tearing (tearing velocity ∼ 37.6 − 67.6 cm/yr with the lower-mantle viscosity of up to 1022 Pa·s), which leads to surface uplift signature of 0.5 − 1.5 km across the forearc region throughout the tearing process. While the fast slab tearing (< 2 Myr over 600 km wide slab) and the lack of arcuate slab in my models limit a direct comparison with the Western Mediterranean, this approach provides a new insight into the link between slab tearing in the mantle and surface uplift. My models yield uplift rates of 0.23 − 2.16 mm/yr, as a result of slab tearing, which is compatible with the uplift rate needed to achieve an equilibrium between seaway-uplift and seaway-erosion which could have led to the closure of marine gateways that reduced the water-flow from the Atlantic Ocean into the Mediterranean Sea during the first stage of the Messinian Salinity Crisis, This work has been supported by EU Marie Curie Initial Training Network ‘SUBITOP’ (674899-SUBITOP-H2020-MSCA-ITN-2015) and MITE (Spanish Government national research program; CGL2014- 59516). This thesis has been developed using the facilities of the Laboratory of Geodynamic Modelling from Geo3Bcn-CSIC.