Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Long-Term Stable Neural Interfaces with Nanoporous Graphene Electrodes and Hybrid Polyimide-Aluminium Oxide Encapsulation

  • Katirtsidis, Georgios Alexandros
  • Illa, Xavi
  • Ria, Nicola
  • Corro, Elena del
  • Masvidal Codina, Eduard
  • Garrido, Jose A.
Graphene-based thin film technology holds great promise for next-generation neural interfaces due to graphene´s electrical, electrochemical, and mechanical properties. However, the long-term reliability of this technology remains a challenge, primarily due to the instability of thin-film encapsulation in physiological environments. While standard ceramic encapsulation is robust, it is not compatible with the miniaturization required for minimally invasive implants. This study demonstrates the successful integration of a hybrid encapsulation strategy, combining polyimide with atomic layer deposited (ALD) Al2O3, with nanoporous reduced graphene oxide (rGO) microelectrodes, resulting in chronically stable graphene-based neural interfaces. The encapsulation robustness is validated using flexible interdigitated electrodes (IDEs) subjected to accelerated aging and continuous electrical stress. IDEs demonstrated stable performance after soaking for over 1.5 years in phosphate buffer saline (PBS) at 57 °C. Nanoporous graphene microelectrodes combined with the proposed encapsulation retained their structural integrity and electrochemical performance after soaking for 377 days in PBS at 57 °C, withstanding 1 billion biphasic pulses at very high charge density (1 mC cm- 2) and hundreds of bending cycles without noticeable performance deterioration. This work establishes a long-term stable graphene-based neural interface combining nanoporous rGO electrodes and a hybrid polyimide/Al2O3 encapsulation, demonstrating a key technology advancement for the use of graphene neural interfaces in chronic brain monitoring and neuromodulation applications., Part of this work has been performed in the framework of Universitat Autonoma de Barcelona Materials Science PhD programme and the MINIGRAPH project. MINIGRAPH project has received funding from the European Union's Horizon Europe research and innovation programme under grant agreement No. 101070865. This work was supported by the Swiss State Secretariat for Education, Research and Innovation (SERI) under contract number 22.00163. ICN2 and IMB-CNM are currently supported by the Severo Ochoa Centres of Excellence and Maria de Maeztu Units of Excellence programme, grant CEX2021-001214-S and grant CEX2023-001397-M, respectively, both funded by MCIN and MCIU/AEI/10.13039.501100011033.″ ICN2 is also supported by the CERCA Programme of Generalitat de Catalunya. This research is also funded by the Spanish Ministerio de Ciencia e Innovación (CNS2023-144492), funded by MCIU/AEI /10.13039/501100011033 and the European Union Next-GenerationEU/PRTR. This work has made use of the Spanish ICTS Network MICRONANOFABS, partially supported by MICINN and the ICTS NANBIOSIS, specifically by the Micro-NanoTechnology Unit U8 of the CIBER-BBN. This research was supported by CIBER -Consorcio Centro de Investigación Biomédica en Red- (CB06/01/0049), Instituto de Salud Carlos III, Ministerio de Ciencia e Innovación., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (CEX2023-001397-M), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mitigating Interfacial Contamination for Scalable Integration of Graphene in Neuroelectronic Devices

  • Galceran, Aina
  • Delgà-Fernández, Marta
  • Illa, Xavi
  • Guimerà-Brunet, Anton
  • Garrido, Jose A.
  • Del Corro, Elena
In the past decade, graphene has gained increasing attention as a material for the next generation of neuroelectronic interfaces thanks to its unique combination of properties, including transparency, flexibility, biocompatibility, and electrical performance. When integrated into thin-film technology microfabrication processes, graphene enables highly conformable and low invasive arrays of solution-gated field-effect transistors (gSGFETs), which are micrometric transducers that combine higher spatial density with the capability to record DC-coupled wide-bandwidth neural signals. The same atomic scale nature of graphene that confers its exceptional sensitivity to surface charges also renders device performance strongly dependent on interfacial physicochemical phenomena at the substrate–graphene–medium boundary, which, in turn, are strongly dependent on the quality and pristine condition of the graphene layer. From a materials science perspective, maintaining the structural and electronic integrity of graphene throughout the entire microfabrication process represents a great challenge. Photolithographic processing often introduces polymeric residues, resulting in adsorbed charges and defect sites that induce residual doping, degrade mobility, and lead to time-dependent shifts in the transfer characteristics of gSGFETs. These changes induced by processing reduce sensor sensitivity and generate device-to-device variability, which currently limits reproducible benchmarking and scale-up of the technology. In this Account, we highlight the remarkable potential of gSGFETs in neurotechnology and review the implications that the uncontrolled graphene surface states have on device behavior. We then present process engineering efforts aimed at addressing this issue through graphene cleaning methods. However, these cleaning approaches are necessarily mild to avoid damaging graphene and have not yet demonstrated the ability to fully ensure the homogeneity and reproducibility required for reliable technology. Finally, we examine emerging strategies based on the development of sacrificial protective layers, which act as effective barriers against process-induced contamination. We propose Cu as a particularly promising candidate given that, as the most common substrate for graphene growth, its etching chemistry has already been widely explored. The integration of sacrificial layers in the standardized microfabrication workflows represents a significant opportunity to improve the graphene-based technology’s reliability, enabling its advancement and translation toward industrial applications., The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, funded by MCIU/AEI/10.13039/501100011033. IMB-CNM is supported by the María de Maeztu Units of Excellence programme, Grant CEX2023-001397-M), funded by MCIU/AEI/10.13039/501100011033. M.D.-F., J.A.G., and E.d.C. acknowledge the grant PID2020-113663RB-I00 funded by MCIU/AEI/10.13039/501100011033. X.I. and A.G.-B. acknowledge the grant PID2021-126117NA-I00 funded by MCIU/AEI/10.13039/501100011033. X.I. acknowledges the grant CNS2023-144492 funded by MCIU/AEI/10.13039/501100011033 and the European Union Next-GenerationEU/PRTR. A.G. acknowledges the grant 101158723-GAIA funded by the European Union’s Horizon Europe Research and Innovation Programme. E.d.C. acknowledges the grant 101125401-TRIBOMED funded by the European Union’s Horizon Europe Research and Innovation Programme - European Research Council Executive Agency. This work has made use of the Spanish ICTS Network MICRONANOFABS, partially supported by MICINN and the ICTS NANBIOSIS, specifically by the Micro-NanoTechnology Unit U8 of the CIBER-BBN. This research was supported by CIBER - Consorcio Centro de Investigación Biomédica en Red- (CB06/01/0049), Instituto de Salud Carlos III, Ministerio de Ciencia e Innovación., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (CEX2023-001397-M), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

An artefact-resilient wide bandwidth bidirectional graphene neural interface

  • Prokop, Michał
  • Esparza-Iaizzo, Martín
  • Masvidal Codina, Eduard
  • Illa, Xavi
  • Codadu, Neela K.
  • Rathore, Daman
  • Ria, Nicola
  • Kostarelos, Kostas
  • Del Corro, Elena
  • Garcia Cortadella, Ramon
  • Wykes, Rob C.
  • Guimerà-Brunet, Anton
  • Garrido, Jose A.
The ability to simultaneously record and modulate neural activity is critical for next-generation bidirectional neural interfaces aiming to enable adaptive neuromodulation therapies for neurological disorders. Active graphene transistor technologies are particularly promising for neural recordings, as they extend the ability to monitor brain activity at very low frequencies and support multiplexed operation for high-density neural interfaces. However, their limited charge injection capacity makes them unsuitable for stimulation. In this work, we present a bidirectional neural interface that combines nanoporous reduced graphene oxide (rGO) microelectrodes for high charge-injection focal stimulation and graphene solution-gated field-effect transistors (gSGFETs) for brain activity monitoring. Using scalable cleanroom microfabrication techniques, we monolithically integrate these two graphene-based technologies into fully flexible neural probes, leveraging their complementary functionalities within a single-device platform. We evaluate the performance of the hybrid devices both in saline and in vivo, with a particular focus on transistor performance during stimulation. Our results demonstrate that the recording capability of this bidirectional neural interface, including the monitoring of infraslow and local field potential activity, is not compromised during stimulation, opening avenues for future development of adaptive infraslow-based neuromodulation therapies., This research was funded by the European Union’s Horizon 2020 research and innovation program under grant agreement no. 881603 (Graphene Flagship Core 3) and the European Union’s Horizon Europe research and innovation program under grant agreement 101070865 (MINIGRAPH) and 101130650 (META-BRAIN). The ICN2 has been supported by the Severo Ochoa Centers of Excellence program [SEV-2017-0706]. ICN2 and IMB-CNM are currently supported by the Severo Ochoa Centers of Excellence and Maria de Maeztu Units of Excellence program, grant CEX2021-001214-S and grant CEX2023- 001397-M, respectively, both funded by MCIN and MCIU/AEI/10.13039.501100011033. ICN2 is also supported by the CERCA Program of Generalitat de Catalunya. This research is also funded by the Spanish Ministerio de Ciencia e Innovación (PID2020−113663RB-I00 and PID2021-126117NA-I00) founded by MCIU/AEI/10.13039/ 501100011033) and by “ERDF A way of making Europe”, PLEC2022-009232, PCI2021-122095-2A and CNS2023-144492, funded by MCIU/AEI /10.13039/501100011033 and the European Union Next-GenerationEU/PRTR. N. R. acknowledges grant PRE2020-093708 founded by MCIN/AEI /10.13039/501100011033 and by FSE. E. M. C. acknowledges grant FJC2021-046601-I funded by Agencia Estatal de Investigacion of Spain and the European Union Next-GenerationEU/PRTR. This work has made use of the Spanish ICTS Network MICRONANOFABS, partially supported by MICINN and the ICTS NANBIOSIS, specifically by the Micro-NanoTechnology Unit U8 of the CIBER-BBN. This research was supported by CIBER -Consorcio Centro de Investigación Biomédica en Red- (CB06/01/0049), Instituto de Salud Carlos III, Ministerio de Ciencia e Innovación. The project that gave rise to these results received the support of a fellowship from the “la Caixa” Foundation (ID 100010434). M. P. acknowledges grant with fellowship code LCF/BQ/DI21/11860021., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (SEV-2017-0706), With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (CEX2023-001397-M), Peer reviewed