Pasar al contenido principal

SEGURIDAD Y DURABILIDAD DE ESTRUCTURAS CRÍTICAS DE HORMIGÓN ARMADO MEDIANTE SENSORES INTELIGENTES: PREDICCIÓN, PREVENCIÓN Y CONTROL DE PROCESOS DE CORROSIÓN (SEGHOSENS)

CPP2023-010657

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Transferencia de Conocimiento
Convocatoria Proyectos en Colaboración Público-Privada
Año convocatoria 2023
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario CHATU TECH, S.L.

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Novel Application of Voltammetric Sensors to Characterize the Electrochemical Behavior of Porous Media

  • Martínez-Ibernón, Ana|||0000-0003-2136-5650
  • Gandía-Romero, Jose M.|||0000-0003-0257-3286
  • Lliso-Ferrando, Josep Ramon|||0000-0002-2457-9024
  • Gasch, Isabel|||0000-0001-7036-4481
[EN] The objective of this study is to assess the feasibility of using embedded voltammetric sensors for the electrochemical characterization of porous materials, specifically concrete, and to analyze how environmental conditions influence their response. Cyclic voltammograms were recorded in solutions simulating various pore-solution conditions of concrete as well as in concrete specimens under different states (water-saturated, carbonated, and chloride-contaminated), using a gold electrode as the sensing element. The morphology of the voltammograms and characteristic electrochemical parameters (peak current and potential, Delta E p, i B/i b, alpha n, R u) were examined to identify similarities and differences in the sensor's behavior across both environments. Subsequently, principal component analysis (PCA) was applied to evaluate the reproducibility of the response and the sensor's discriminating capability in a porous medium such as concrete. The results indicate that the identified redox process, associated with OH- adsorption/desorption, preserves its electrochemical nature in both environments; however, in concrete, the control mechanism shifts from quasi-reversible to diffusion-kinetic, governed by ionic resistance and the tortuosity of the pore network. The PCA results demonstrate that the embedded sensor effectively differentiates between reference, carbonated, and chloride-contaminated concrete, confirming its potential as a nondestructive diagnostic tool for in situ electrochemical monitoring of porous materials containing interstitial moisture., The authors would like to express their gratitude to the Spanish Ministry of Science and Innovation for the predoctoral scholarship granted to Ana Martinez Ibernon (FPU 16/00723). Financial support from the R&D&I project CPP2023-010657, funded by MCIU/AEI/10.13039/501100011033 and by FEDER, EU.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Logistic Modeling of Copper Oxidation in Alkaline Media Considering Solubility Gaps between the Solid Oxidation Products

  • Doménech-Carbó, Antonio
  • Gimeno-Adelantado, José Vicente
  • Martínez-Ibernón, Ana|||0000-0003-2136-5650
[EN] A theoretical model is proposed to describe the essential features appearing in the voltammetry of copper electrodes in contact with aqueous alkaline media. The model is based on the introduction of miscibility gaps into a logistic formulation of the charge/potential relationship. This is directly inspired by ion-insertion electrochemistry and emphasizes the OH¿-assisted nature of the involved oxidation processes. The model accounts for miscibility limits and refinements, accounting for deviations from reversibility, diffusive constraints, and nucleation rate effects can be added. Linear potential scan voltammetric parameters, in particular the large potential hiatus existing between anodic and cathodic peaks, can be satisfactorily reproduced with this model., Financial support by the projects CPP2023-010657 and PID2020-113022GB-I00 within the MCIN/AEI/10.13039/50110 0 011033 frame is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Localised corrosion on reinforced concrete structures: Pitting factor analysis

  • Lliso-Ferrando, Josep Ramon|||0000-0002-2457-9024
  • Gasch, Isabel|||0000-0001-7036-4481
  • Martínez-Ibernón, Ana|||0000-0003-2136-5650
  • Valcuende Payá, Manuel Octavio|||0000-0002-9967-1554
[EN] Pitting corrosion has become one of the main causes of premature deterioration in reinforced concrete structures exposed to marine environments. This phenomenon is particularly critical for structural reliability, as it leads to a more severe reduction in the cross-sectional area of reinforcing bars compared with uniform corrosion. Over the past four decades, numerous studies have focused on evaluating the pitting factor (Rpit), a parameter that relates the uniform corrosion depth (Px) to the maximum pit depth (Ppit). However, the values reported in the literature exhibit considerable variability. In this experimental study, pitting-induced damage was investigated in reinforced concrete specimens immersed in seawater for 320 days. Detailed pit characterisation was conducted on 72 reinforcing bars using three-dimensional (3D) scanning. The results, complemented by the analysis of an additional dataset of 368 values compiled from the literature, show that Rpit cannot be regarded as a constant parameter, as it mainly depends on the extent of corrosion, exhibiting lower values at more advanced stages of degradation. The method used to induce corrosion also influenced Rpit, although this effect became negligible at higher degradation levels. For chloride-induced corrosion, where chlorides were not incorporated during concrete mixing, the experimental results revealed a robust power-law relationship between and Rpit. Based on these findings, an empirical equation describing this relationship is proposed, represented by the 95th percentile curve of the experimental data., The authors gratefully acknowledge the financial support of the Spanish Government through grants PID2020-119744RB-C21 and CPP2023-010657, both funded by MCIN/AEI. The authors also wish to thank the Universitat Politecnica de Valencia for the predoctoral scholarship awarded to Josep Ramon Lliso Ferrando under the Formacion de Personal Investigador programme (FPI-UPV-2018) , as well as for the additional funding provided through grant PAID-06-24. Moreover, the authors acknowledge the Generalitat Valenciana for its financial support through grant CIGE/2024/4.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Experimental assessment of a controlled-polarization technique for the in-situ measurement of corrosion rate in reinforced concrete, Evaluación experimental de una técnica con polarización controlada para la medición in situ de la velocidad de corrosión en hormigón armado

  • Ramón Zamora, Jose Enrique
  • Martínez Sierra, Isabel
  • Castillo Talavera, Ángel
  • Lliso-Ferrando, Josep Ramon
  • Martínez-Ibernón, Ana
[EN] This work presents the experimental evaluation of a novel methodology for the in situ assessment of corrosion in reinforced concrete structures. The technique is based on dynamic control of the applied current to maintain appropriate polarization conditions. Laboratory tests were conducted on specimens with different concrete types and exposure conditions. The results show improved polarization control compared to previous generations of confined current corrosion meters, with corrosion rate values comparable to reference techniques such as Linear Polarization Resistance and embedded multiparametric systems. The originality lies in ensuring appropriate polarization regardless of corrosion state through a non-invasive approach, demonstrating strong potential as an effective tool for corrosion diagnosis., [ES] Este trabajo presenta la evaluación experimental de una nueva metodología para la evaluación in situ de la corrosión en estructuras de hormigón armado. La técnica se basa en el control dinámico de la corriente aplicada para asegurar una polarización adecuada. Se realizaron ensayos en laboratorio con distintos tipos de hormigón y condiciones de exposición. Los resultados muestran un mejor control de la polarización respecto a generaciones anteriores de corrosímetros por corriente confinada, con valores de velocidad de corrosión comparables a técnicas de referencia como la Resistencia a la Polarización Lineal y sistemas multiparámetro embebidos. La originalidad radica en asegurar la polarización adecuada independientemente del estado de corrosión mediante una aproximación no invasiva, con potencial como herramienta eficaz de diagnóstico., This research was funded by the Spanish Ministry of Science and Innovation through projects PID2020-119744RB-C21 and PID2020-119744RB-C22. It also received funding from the State Research Agency through the financial aid scheme for public–private partnership projects (project CPP2023-010657). The authors would like to thank the Instituto de Ciencias de la Construcción Eduardo Torroja(IETcc-CSIC) and the Universitat Politècnica de València for their support. They would also like to express special thanks to the IETcc-CSIC laboratory technicians Ana Labanda, Isaías Benjamín and Luis Córdoba for their valuable contribution to the experimental work., Peer reviewed