Pasar al contenido principal

APLICACION DE CATALIZADORES DE BAJO COSTE PARA EL TRATAMIENTO Y ACONDICIONAMIENTO DE AGUA

CTM2016-76454-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2016
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD AUTONOMA DE MADRID

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

3D-Printed Fe-doped silicon carbide monolithic catalysts for wet peroxide oxidation processes

  • Quintanilla, Asunción
  • Casas, José A.
  • Miranzo López, Pilar
  • Osendi, María Isabel
  • Belmonte, Manuel
The catalyst stability has become a key issue for wet peroxide oxidation (CWPO) processes. Herein, an alternative method for the manufacturing of iron (Fe) catalysts by using three-dimensional (3D) printing techniques is proposed to enhance the Fe immobilization, where these metallic nanoparticles are part of a printable aqueous silicon carbide (SiC)-based ink. Cylindrical Fe/SiC monoliths (D ∼ 13 mm, H ∼ 4.5 mm, 74 squared cells cm) are manufactured by direct ink writing (Robocasting) and further treatment up to 1500 °C into a spark plasma sintering (SPS) furnace to assure a certain mechanical integrity. It was found that the increasing SPS temperature progressively decreases the porosity -or increases the apparent density- of the printed struts, lowering the accessibility of reactants to the Fe sites but improving the catalyst mechanical strength and leaching resistance. 3D Fe/SiC monoliths treated at 1200 °C arise as robust catalysts for CWPO processes due to the combination of good catalytic activity, highly- efficient HO decomposition, long-term stability and excellent mechanical strength. A simple potential kinetic model is proposed, capable of describing the phenol disappearance, TOC removal and HO consumption. The results of this study point out a new approach for the conformation by Robocasting of metal-based catalysts in suitable morphological 3D-structures for scaling-up reactions., This work was supported by the following projects: MAT2015-67437-R (MINECO, FEDER, UE) and CTM2016-76454-R (MINECO, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Graphene-based nanostructures as catalysts for wet peroxide oxidation treatments: From nanopowders to 3D printed porous monoliths

  • Quintanilla, Asunción
  • Carbajo, J.
  • Casas, José A.
  • Miranzo López, Pilar
  • Osendi, María Isabel
  • Belmonte, Manuel
[EN] This paper explores the catalytic behaviour of different graphene-based nanostructures for the treatment of wastewater using Catalytic Wet Peroxide Oxidation (CWPO) processes. In a first stage, graphene-based nanopowders with distinct physical-chemical characteristics are tested in the CWPO of phenol using the following standard operating conditions: [Phenol] = 1 g·L, [HO] = 5 g L and 80 °C. Graphene nanoplatelets with the lowest oxygen content exhibit the highest catalytic activity. The typical phenol oxidation by-products are detected in the liquid phase while CO and CO appear in the gas phase. Afterwards, three dimensional (3D) porous graphene monoliths (D ∼ 11.5 mm, H ∼ 4 mm, D ∼ 0.68 mm and δ =0.36 cm, 75 cells·cm, ε = 41%) based on those nanoplatelets are additive manufactured using a direct ink writing technique and, then, tested under similar CWPO conditions. The results evidence that the 3D graphene-based structures are catalytically active, though they undergo a progressive deactivation due to the deposition of organic matter. The graphene-based monoliths can be regenerated by thermal treatments, allowing their use at industrial scale by means of reaction-thermal regeneration cycles., The authors thank the financial support by the Spanish Ministerio de Ciencia, Innovación y Universidades (MICINN) and FEDER program (EU) through the projects: CTM2016-76454-R (MICINN), MAT2015-67437-R (MICINN/ FEDER,UE) and RTI2018-095052-B-I00 (MICINN).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The influence of the catalyst on the CO formation during catalytic wet peroxide oxidation process

  • Carbajo, J.
  • Quintanilla, Asunción
  • García-Costa, A.L.
  • González Julián, Jesús
  • Belmonte, Manuel
  • Miranzo López, Pilar
  • Osendi, María Isabel
  • Casas, José A.
[EN] Herein, the formation of carbon monoxide as a harmful product upon the Catalytic Wet Peroxide Oxidation process is studied in presence of different solid catalysts: an iron supported activated carbon catalyst, a metal-free catalyst based on Graphene Nanoplatelets, and 1.6 wt.% Fe containing CrAlC MAX phase catalyst. The CWPO performance and the evolution of the gas effluent have been compared to that obtained in a conventional Fenton process. Carbon monoxide yield released was significantly lower in Catalytic Wet Peroxide Oxidation process in relation to that obtained in the Fenton process, where CO concentration reaches a maximum of 6651 mg/Nm. By contrast, in presence of activated carbon-Fe catalyst and, notably, Graphene Nanoplatelets and CrAlC MAX phase catalysts, a more progressive phenol and aromatics intermediates oxidation resulted in a much lower CO maximum concentration in the gas phase at the exit of the reactor of 2454 mg/Nm, 170 mg/Nm and 187 mg/Nm, respectively. Hence, when compared to the homogeneous Fenton oxidation, Catalytic Wet Peroxide Oxidation process results be a more sustainable treatment for high-loaded phenolic wastewaters by decreasing the hazardous CO gaseous emissions avoiding this way a secondary pollution during the oxidation process., This work was supported by the following project: CTM2016-76454-R and MAT2015-67437-R (Ministerio de Economía y Competititivad, MINECO). J. Carbajo wants to thank the Ministerio de Ciencia, Innovación y Universidades (MICIU) for a grant under the Juan de la Cierva_Incorporación programme (IJCI-2017-32682)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Analysis of photoefficiency in TiO2 aqueous suspensions: Effect of titania hydrodynamic particle size and catalyst loading on their optical properties

  • Carbajo Olleros, Jaime
  • Tolosana-Moranchel, Álvaro
  • Casas, J.A.
  • Faraldos, Marisol
  • Bahamonde, A.
Effect of TiO hydrodynamic particle sizes and catalyst loading on the optical properties of three commercial photocatalysts has been analyzed (P25 Aeroxide, P25/20 VP Aeroperl and P90 Aeroxide). These catalysts, characterized by similar structural and electronic properties, but with singular differences in morphology and aggregation particle sizes, have been studied to understand the corresponding crossed effects on their final photo-efficiencies throughout organic matter removal in aqueous suspensions, with a pollutant such as phenol, where photo-oxidation is regularly described as mediated by an indirect photo-mechanism via HO radicals. Reflectance measurements in the range of visible wavelength, close to TiO absorption edge, could be comparable to extinction coefficient in the UV-A range and may well be suitable to optimize catalyst loadings. Phenol photocatalytic efficiency followed P25 > P90 > P25/20 order, emphasizing that increases in TiO hydrodynamic particle sizes are detrimental to phenol photo-efficiency, and highlighting that radiation–photocatalyst interactions are essential but not enough to guarantee an improved photodegradation rate. Finally, the higher values of HO found in sonicated P25/20 catalyst could corroborates its better performance in phenol photodegradation, as a consequence of lowest hydrodynamic particle sizes in reaction media, which take advantage of light as a result of a significant increase in exposed surface area., This work has been supported by the Spanish Plan Nacional de I+D+i through the projects CTM2015-64895-R and CTM2016-76454-R. Jaime Carbajo thanks to the Spanish Ministerio de Economía y Competitividad (MINECO) for his FPI grant. Alvaro Tolosana-Moranchel thanks to Ministerio de Educación, Cultura y Deporte for his FPU grant (FPU1016054/). The authors are also grateful Evonik company for TiO2 samples