Pasar al contenido principal

ESTRUCTURAS TRIDIMENSIONALES CON GRAFENO COMO PLATAFORMA PARA EL DESARROLLO DE MATERIALES HIBRIDOS

MAT2015-67437-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2015
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Dirección General de Investigación Científica y Técnica
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 29
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

3D-Printed Fe-doped silicon carbide monolithic catalysts for wet peroxide oxidation processes

  • Quintanilla, Asunción
  • Casas, José A.
  • Miranzo López, Pilar
  • Osendi, María Isabel
  • Belmonte, Manuel
The catalyst stability has become a key issue for wet peroxide oxidation (CWPO) processes. Herein, an alternative method for the manufacturing of iron (Fe) catalysts by using three-dimensional (3D) printing techniques is proposed to enhance the Fe immobilization, where these metallic nanoparticles are part of a printable aqueous silicon carbide (SiC)-based ink. Cylindrical Fe/SiC monoliths (D ∼ 13 mm, H ∼ 4.5 mm, 74 squared cells cm) are manufactured by direct ink writing (Robocasting) and further treatment up to 1500 °C into a spark plasma sintering (SPS) furnace to assure a certain mechanical integrity. It was found that the increasing SPS temperature progressively decreases the porosity -or increases the apparent density- of the printed struts, lowering the accessibility of reactants to the Fe sites but improving the catalyst mechanical strength and leaching resistance. 3D Fe/SiC monoliths treated at 1200 °C arise as robust catalysts for CWPO processes due to the combination of good catalytic activity, highly- efficient HO decomposition, long-term stability and excellent mechanical strength. A simple potential kinetic model is proposed, capable of describing the phenol disappearance, TOC removal and HO consumption. The results of this study point out a new approach for the conformation by Robocasting of metal-based catalysts in suitable morphological 3D-structures for scaling-up reactions., This work was supported by the following projects: MAT2015-67437-R (MINECO, FEDER, UE) and CTM2016-76454-R (MINECO, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Ceramic phononic crystals with MHz-range frequency band gaps

  • Koller, Martin
  • Kruisová, Alena
  • Seiner, Hanus
  • Sedlák, Petr
  • Grabec, Tomáš
  • Román-Manso, Benito
  • Miranzo López, Pilar
  • Belmonte, Manuel
  • Landa, Michal
Robocasting is an additive manufacturing method, which is capable of fabricating microarchitectured scaffolds, consisting of periodically repeating thin ceramic rods in various spatial arrangements. Fully sintered ceramic scaffolds are obtained by a combination of layer-by-layer 3D printing and subsequent presureless spark plasma sintering of the printed green ceramic bodies. Due to the complex structures with easily tunable geometric parameters, phononic crystals can be fabricated by the robocasting method. In this contribution, elastic and acoustic properties of the robocast silicon carbide scaffold are shown, utilizing a combination of resonant ultrasound spectroscopy measurement and finite element modeling. The scaffold is highly anisotropic in elastic properties, which leads to a strong acoustic energy focusing along the principal axes of the silicon carbide rods. Moreover, frequency band gaps in MHz range are detected by measur-ing longitudinal wave transmission, which is compared with a theoretical prediction by the finite element modeling., This work was supported by the Czech Science Foundation grant No. 17-01618S, and Spanish Project MAT2015-67437-R (MINECO, FEDER, UE)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thermal conductivity of silicon carbide composites with highly oriented graphene nanoplatelets

  • Román-Manso, Benito
  • Chevillotte, Yoan
  • Osendi, María Isabel
  • Belmonte, Manuel
  • Miranzo López, Pilar
Dense silicon carbide (SiC)-based composites containing up to 20 vol.% of graphene nanoplatelets (GNPs)were manufactured via a liquid-phase Spark Plasma Sintering (SPS) process, employing Y2O3and Al2O3as sintering aids. The applied uniaxial pressure during SPS produced a preferential orientation of theGNPs, with the ab-plane perpendicular to the pressing axis, thus bringing about high thermal anisotropy.Thermal diffusivity/conductivity were measured as a function of the GNPs content, being enhanced by~30% in the perpendicular direction to the SPS pressing axis, whereas a moderate decrease was observedin the parallel direction owing to the much lower intrinsic conductivity of the aligned GNPs in the c-axis,with no significant contribution of the thermal resistance of the GNP-SiC interfaces. A non-monotonicaltemperature dependence for the thermal conductivity was detected in composites containing <10 vol.%GNPs, explained by the strong p-doping of these SiC ceramics, This work was supported by the Spanish Government under projects MAT2012-32944, MAT2015-67437-R, and by CSIC under project PIE201360E063, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The effect of graphene nanoplatelets on the thermal and electrical properties of aluminum nitride ceramics

  • Simsek, Irem Nur G.
  • Nistal, Andrés
  • García, Eugenio
  • Pérez-Coll, Domingo
  • Miranzo López, Pilar
  • Osendi, María Isabel
The thermal conductivity (κ) of AlN (2.9 wt.% of YO) is studied as a function of the addition of multilayer graphene (from 0 to 10 vol.%). The κ values of these composites, fabricated by spark plasma sintering (SPS), are independently analyzed for the two characteristic directions defined by the GNPs orientation within the ceramic matrix; that is to say, perpendicular and parallel to the SPS pressing axis. Conversely to other ceramic/graphene systems, AlN composites experience a reduction of κ with the graphene addition for both orientations; actually the decrease of κ for the in-plane graphene orientation results rather unusual. This behavior is conveniently reproduced when an interface thermal resistance is introduced in effective media thermal conductivity models. Also remarkable is the change in the electrical properties of AlN becoming an electrical conductor (200 S m) for graphene contents above 5 vol.%., The Present work was financed by CSIC (Spain) under project PIE201360E063 and MINECO (Spain) with project MAT2015-67437-R. One of the authors (I. Simsek) greatly acknowledges the Erasmus+ Internship mobility program delivered by Anadolu University for financing her stay in the ICV-CSIC. Dr. Pérez-Coll is acknowledged to the FCT in Portugal for financial support by a BPD grant (SFRH/BPD/112282/2015). The assistance of the Laboratorio de Microscopías Avanzadas (LMA) from the Instituto de Nanociencia de Aragón (INA) (Universidad de Zaragoza) in the HRTEM observations and specimen preparation by FIB method is acknowledged. The support of the Transmission Electron Microscopy Unit of the Institute of Catalysis and Petrochemistry (CSIC) is also recognised., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Face dependent footprints of carpet-like graphene films grown on polycrystalline silicon carbide

  • Ramírez, Cristina
  • García, Eugenio
  • Barrena, Esther
  • De Pablos, Ángel
  • Belmonte, Manuel
  • Osendi, María Isabel
  • Miranzo López, Pilar
  • Ocal, Carmen
Continuous epitaxial graphene (EG) films have been grown on polished surfaces of dense polycrystalline SiC ceramics by heating in a Spark Plasma Sintering furnace (SPS). The confining of the sample into a graphite die and the use of a high pulsed dc current that triggers the joule heating of the system play a key role in the graphene formation by Si sublimation. The polycrystalline nature of the sample has allowed the comparison, through different local probe microscopies and micro-Raman spectroscopy, between EG films simultaneously grown on different SiC faces at exactly the same conditions, providing valuable information on their thickness, quality and stresses. Notably, whereas a graphene bilayer grows over Si-face grains, multilayer graphene (~10 layers) forms on C-faces. The observed nano-electronic and nano-mechanical heterogeneities of the surface, showing up as differences in charge state and strain release mechanisms, are found to arise from the dependence of the EG properties when developed on each grain orientation; the same applies in the case of the macro-mechanical scratch resistance. SPS demonstrates to be a reliable and flexible methodology to prepare continuous graphene films on SiC components with many possibilities for scaling-up at low cost., This work has been supported by the Spanish government under the projects MAT2015-67437-R (MICINN/FEDER, UE), MAT2016-77852-C2-1-R (AEI/FEDER, UE), RTI2018-095052-B-100 (AEI/FEDER, UE) and the ‘‘Severo Ochoa’’ Program for Centers of Excellence in R&D (SEV-2015-0496) and the Generalitat de Catalunya through grant 2017 SGR668. C. R. thanks the financial support by MICINN under contract IJCI-2017-34724 of “Juan de la Cierva” Program. The authors gratefully acknowledge A. del Campo for his help and advice in acquisition of Raman-AFM images., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Printing of Graphene Nanoplatelets into Highly Electrically Conductive Three-Dimensional Porous Macrostructures

  • Osa, Gregorio de la
  • Pérez-Coll, Domingo
  • Miranzo López, Pilar
  • Osendi, María Isabel
  • Belmonte, Manuel
The manufacturing of three-dimensional (3D) graphene monoliths with remarkable electrical performance has become a challenging issue because their potential applications in the energy and electronic-based fields. Here we show the development of outstanding electrically conductive graphene patterned cellular structures combining a versatile and easily scalable filament printing method, such as Robocasting, with the use of highly crystalline graphene nanoplatelets (GNPs) as the graphene source. Robust 3D pure graphene-based monoliths have been manufactured by printing pseudoplastic aqueous-based GNPs inks with high graphene contents (36.6 wt %) and further thermal treatment by spark plasma sintering. Specific conductivities up to 385 S·cm have been assessed along the longitudinal direction of the 3D structure, i.e., where the current mainly flowed along the struts, being more conductor than reported 3D synthesized graphene structures and up to 2 orders of magnitude higher than 3D printed graphene monoliths. The present findings could open a straightforward pathway for creating, in a controlled way, a wide range of graphene-based hierarchical structures with an excellent electrical performance and robustness that could be employed for energy storage systems., Spanish Government (MAT2012-3294 and MAT2015-67437-R projects) and CSIC (PIE 201360E063 project). D. Pérez-Coll also acknowledges the financial support by FCT-BPD grant (SFRH/BPD/112282/2015)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Highly-porous hierarchical SiC structures obtained by filament printing and partial sintering

  • Gómez-Gómez, Alberto
  • Moyano, Juan J.
  • Román-Manso, Benito
  • Belmonte, Manuel
  • Miranzo López, Pilar
  • Osendi, María Isabel
Three-dimensional (3D) porous silicon carbide (SiC) structures with total porosity in the range of 64–85% are achieved from nanosized SiC powders by filament printing and partial sintering in a spark plasma sintering (SPS) furnace. The effects of the SPS temperature (1500 and 1700 °C) and the addition of oxide sintering aids (7 wt. % YO+AlO) on the porosity of the scaffolds are quantitatively compared. More specifically, hierarchical porosity consisting of meso-pores (< 50 nm) in the struts and open macro-pores (in the range of 500–700 μm) defined by the patterned structure is verified for the 1500 °C SPS treatment. The strength of the structures as a function of the density as well as their cooling profiles, once subjected to rapid heating under a direct flame, are analyzed. By following this easy route, an adaptable family of robust light 3D SiC structures with hierarchical porosity is accomplished., MINECO/FEDER, UE with project MAT2015-67437-R, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mixed-ionic and electronic conduction and stability of YSZ-graphene composites

  • Marinha, Daniel
  • Belmonte, Manuel
Composites of 8 mol% Yttria-stabilized Zirconia (YSZ) containing 0, 7, 10 and 14 vol.% of graphene nano-platelets (GNP) were fully densified by Spark Plasma Sintering. The effect of GNP on the electrical performance of the composites was analyzed by impedance spectroscopy as a function of temperature (150–800 °C) and oxygen partial pressure (0.21–10 atm). Results show that below GNP percolation threshold (7.1 vol.%), the electrical behavior is dominated by the matrix oxygen-ion conductivity. Above the threshold, the conductivity is predominantly electronic provided by the GNP network. The total conductivity of composites was used as an indicator of GNP stability in different atmospheres. YSZ/GNP composites remain stable in inert conditions up to 600 °C, and in reducing conditions up to 800 °C, making them good alternatives to perovskite-based materials used for electrochemical applications., This work was supported by project MAT2015-67437-R (MINECO, FEDER, UE)., Peer reviewed, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Exceptional micromachining performance of silicon carbide ceramics by adding graphene nanoplatelets

  • Zeller, Florian
  • Müller, Claas
  • Miranzo López, Pilar
  • Belmonte, Manuel
The electrical discharge machining (EDM) performance of silicon carbide (SiC) ceramics containing graphene nanoplatelets (GNPs) is investigated for the first time. Under fine machining conditions, the material removal rate (MRR) dramatically increases up to 186% when 20 vol.% of GNPs are added to SiC ceramics, leading to reductions on the electrode wear rate of 132%. The EDMed nanocomposites exhibit surface roughness ≤ 0.8 μm. This outstanding EDM response of the graphene nanocomposites as compared to monolithic SiC is explained by their enhanced transport properties, establishing a direct dependence of MRR with the electrical conductivity. EDM performance of the nanocomposites also depends on the testing direction for materials with low GNPs connectivity (≤ 10 vol.%). Melting/evaporation are the main removal mechanisms, thermal spalling also operating for low thermal conducting materials. The employ of EDM on SiC/graphene nanocomposites allows machining microparts with a fine dimensional precision, opening new opportunities for SiC-based microcomponents., This work was supported by the Spanish Government (MAT2012-32944 and MAT2015-67437-R projects)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

From bulk to cellular structures:A review on ceramic/graphene filler composites

  • Miranzo López, Pilar
  • Belmonte, Manuel
  • Osendi, María Isabel
A revision on ceramic/graphene composites is presented. The more representative results for a wide number of bulk composites are compared, making special emphasis on their mechanical (fracture toughness, strength) and elastic properties, along with wear and friction topics. The electrical functionality boosted by the contacted graphene network is critically assessed for conducting and dielectric ceramic matrices. Regarding thermal transport, the enhancement or depletion of thermal conductivity is reviewed for different materials and specific orientations. Furthermore, new developments on layered materials and coatings, as well as on three-dimensional cellular composites, which certainly widen the scope of applications for this remarkable group of ceramic materials, are looked over., This work was supported by the JECS Trust and by project MAT2015-67437-R (MINECO, FEDER, UE)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Contact damage resistant SiC/graphene nanofiller composites

  • Belmonte, Manuel
  • Miranzo López, Pilar
  • Osendi, María Isabel
The short-crack domain and contact damage resistances of silicon carbide (SiC) ceramics containing graphene fillers (graphene nanoplatelets -GNPs- or reduced graphene oxide sheets -rGOs) are investigated by performing Hertzian contact tests. A progressive deviation from the linear Hertzian elastic response with increasing graphene content takes place, the composite containing 20 vol.% GNPs being the most deformable material. When adding increasing amounts of GNPs, the damage beneath the contact zone turns from well-defined cone cracks of monolithic SiC to a widespread subsurface damage where microcracks are generated due to the matrix/graphene interface debonding by a shear faulting process. This mechanism enhances the contact damage resistance of the composites, redistributing the stresses at the contact and limiting the long-crack formation. The composite containing 5 vol.% rGOs fully precludes the cone cracks development and enlarges the quasi-plastic damage zone, extraordinarily enhancing the contact damage resistance that approaches to that of a ductile material., This work was supported by project MAT2015-67437-R (MINECO,FEDER, UE), Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Friction and wear behaviour of silicon carbide/graphene composites under isooctane lubrication

  • Llorente, Javier
  • Belmonte, Manuel
The tribological performance of silicon carbide (SiC)/graphene nanoplatelets (GNPs) composites is analysed under oscillating sliding tests lubricated with isooctane, looking to explore their potential as components for gasoline direct injection (GDI) engines. High graphene filler contents (20 vol.% of GNPs) are required to substantially reduce the friction coefficient of SiC ceramics, attaining decreases on friction up to 30% independently of the applied load. For all materials and testing conditions a mild wear regime is evidenced. SiC/20 vol.% GNPs composite also enhances the wear resistance up to 35% at low load, but the addition of GNPs produces a deleterious effect as the load augments. The tribological behaviour depends on the formation and destabilization of a solid lubricant carbon-based tribofilm and strongly correlates with the mechanical properties of the tested materials., This work was supported by Project MAT2015-67437-R (MINECO,FEDER, UE)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Direct in situ observation of toughening mechanisms in nanocomposites of silicon nitride and reduced graphene-oxide

  • Ramírez, Cristina
  • Wang, Qizhong
  • Belmonte, Manuel
  • Miranzo López, Pilar
  • Osendi, María Isabel
  • Sheldon, Brian W.
  • Nitin P., Padture
In situ observations are performed, for the first time, of stable crack propagation in nanocomposites of silicon nitride (SiN) and reduced graphene-oxide (rGO) inside a scanning-electron microscope. Two different specimen geometries (wedge-splitting and double-cantilever beam) are used to observe crack interactions with rGO stacks in two different orientations (cross-section and in-plane). These observations provide new insights into the unique, effective pull-out of crack-bridging rGO stacks, which appears to be responsible for the extraordinary toughness in the SiN/rGO nanocomposites. These insights could be used to design and create future ceramic/rGO nanocomposites with superior mechanical properties., Primaryfinan-cial support for this research was provided by the U.S. Department ofEnergy, Office of Basic Energy Sciences, under Contracts DE-FG02-10ER46771 and DE-SC0018113. Q.W. and N.P.P. also acknowledge thegenerous gift from the II-VI Foundation. M.B., P.M., and M.I.O. acknowl-edge thefinancial support through the project MAT2015-67437-R (MINECO/FEDER, UE)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ultrasonic bandgaps in 3D-printed periodic ceramic microlattices

  • Kruisová, Alena
  • Ševcík, Martin
  • Seiner, Hanus
  • Sedlák, Petr
  • Román-Manso, Benito
  • Miranzo López, Pilar
  • Belmonte, Manuel
  • Landa, Michal
The transmission of longitudinal ultrasonic waves through periodic ceramic microlattices fabricated by Robocasting was measured in the 2–12 MHz frequency range. It was observed that these structures (scaffolds of tetragonal and hexagonal spatial arrangements with periodicity at length-scales of ∼100 μm) exhibit well-detectable acoustic band structures with bandgaps. The locations of these gaps at relatively high frequencies were shown to be in close agreement with the predictions of numerical models, especially for tetragonal scaffolds. For hexagonal scaffolds, a mixing between longitudinal and shear polarizations of the propagation modes was observed in the model, which blurred the matching of the calculated band structures with the experimentally measured bandgaps., This work was financially supported by the Czech Science Foundation (Grant No. 17-01618S) and MINECO (Spain)/FEDER (UE)under project MAT2015-67437-R, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Polymer-derived ceramic/graphene oxide architected composite with high electrical conductivity and enhanced thermal resistance

  • Román-Manso, Benito
  • Moyano, Juan J.
  • Pérez-Coll, Domingo
  • Belmonte, Manuel
  • Miranzo López, Pilar
  • Osendi, María Isabel
A low temperature method for the fabrication of architected ceramic composites contining graphene is developed based on the infiltration of lightweight graphene oxide (GO) micro-lattices with a preceramic polymer. Self-supported highly porous three-dimensional (3D) GO structures fabricated by direct ink writing are infiltrated with a liquid organic-polysilazane (a compound of Si, C, H, N), and subsequently pyrolyzed at temperatures of 800–1000 ºC to activate the ceramic conversion. These ceramic composites replicate the patterned GO skeleton and, whereas the graphene network provides the conductive path for the composite (electrical conductivity in the range 0.2–4 S cm), the ceramic wrapping serves as a protective barrier against atmosphere, temperature (up to 900 °C in air) and even direct flame. These structured composites also show hydrophobicity (wetting angle above 120°) and better load bearing capacity than the corresponding 3D GO lattice. The process is very versatile, being applicable to different liquid precursors., This work was financed by project MAT2015-67437-R (MINECO/FEDER, UE). JJM acknowledges the financial support of MINECO/FSE (UE) through the FPI contract ref: BES-2016-077759 (2015 call)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Filament printing of graphene-based inks into self-supported 3D architectures

  • Moyano, Juan J.
  • Gómez-Gómez, Alberto
  • Pérez-Coll, Domingo
  • Belmonte, Manuel
  • Miranzo López, Pilar
  • Osendi, María Isabel
The arrangement of 2D graphene-type structures into strong and self-supported architectures by filament printing depends critically on the ink characteristics. Printable inks are normally achieved by controlling the electro-steric interactions in the particle dispersion by different means. This research shows that is possible to use just a single surfactant for graphene-type inks, such as graphene oxide (GO), graphene nanoplatelets (GNP) and their mixtures, to achieve characteristics of gelled inks, in other words, shear-thinning behavior and a high elastic modulus at rest. The surfactant is a commercial hydrogel former of the poloxamer family that contains both hydrophilic and hydrophobic blocks. These inks do not require lyophilization or supercritical drying processes, accordingly the method is simple, scalable and produces lightweight 3D printed structures that exhibit high strength and prominent electrical conductivity after heat treating at 1200 °C. Furthermore, it makes possible to adjust the proportion of GO and GNP in the ink to tailor the properties of the structure according to the pursued application., This work was supported by Ministerio de Ciencia, Innovación y Universidades (MCIU, Spain)/FEDER(UE) with project ref. MAT2015-67437-R. JJM acknowledges the financial support ofMCIU/FSE (UE) through the FPI contract ref: BES-2016-077759, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Remarkable Effects of an Electrodeposited Copper Skin on the Strength and the Electrical and Thermal Conductivities of Reduced Graphene Oxide-Printed Scaffolds

  • Moyano, Juan J.
  • García Diego, Iñaki
  • Damborenea, Juan de
  • Pérez-Coll, Domingo
  • Belmonte, Manuel
  • Miranzo López, Pilar
  • Osendi, María Isabel
[EN] Architected Cu/reduced graphene oxide (rGO) heterostructures are achieved by electrodepositing copper on filament-printed rGO scaffolds. The Cu coating perfectly contours the printed rGO structure, but isolated Cu particles also permeate inside the filaments. Although the Cu deposition conveys a certain mass augment, the three-dimensional (3D) structures remain reasonably light (bulk density ≅ 0.42 g·cm–3). The electrical conductivity (σe) of the Cu/rGO structure (∼8 × 104 S·m–1) shows a notable increment compared to σe of the rGO structure (∼2 × 102 S·m–1). The effect on the scaffold robustness is also notable with an increase of the compressive strength by nearly 10 times (from 20 kPa of the rGO scaffold to 150 kPa of the Cu/rGO structure) and cyclability as well. The improved thermal conductivity of the Cu-coated scaffolds (∼4 times higher), in addition to the σe and strength improvements, suggests that 3D Cu/rGO structures could be suitable assemblies for integration into thermal dissipation systems, particularly as thermal interface materials, for compact electronic devices., This work was supported by Spanish project RTI2018-095052-B-I00 (MCIU/AEI/FEDER, UE). JJM acknowledges the financial support of MCIU through the FPI contract ref: BES-2016-077759., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Frequency-dependent acoustic energy focusing in hexagonal ceramic micro-scaffolds

  • Grabec, Tomáš
  • Koller, Martin
  • Sedlák, Petr
  • Kruisová, Alena
  • Román-Manso, Benito
  • Belmonte, Manuel
  • Miranzo López, Pilar
  • Seiner, Hanus
[EN] Acoustic properties of an additive-manufactured SiC scaffold with hexagonal symmetry fabricated by the robocasting method are studied both numerically and experimentally. The numerical analysis is based on the finite element method (FEM) using Bloch boundary conditions. The calculations show both angular and frequency dispersion of the acoustic waves with wavelengths comparable to the spacing between the rods, i.e., on a millimeter scale, indicating interesting acoustic properties in the MHz range. The dispersion character leads to focusing of the energy propagation into the directions of the rods of the hexagonal structure. This is illustrated by modal-based calculations of the propagation of longitudinal and out-of-plane shear wave packets with a dominant wavelength. The experimental analysis consists of two steps, the measurement of the resonant spectrum and shear wave propagation character. The measured resonant spectrum is in good agreement with the one calculated using numerically obtained low-frequency properties of the structure, also showing the quality of the overall manufactured structure. The time-domain measurement shows significant changes in the energy propagation between low and high frequencies, as predicted by FEM calculations., This work was supported by the Czech Science Foundation, Czechia grant no. GA17-01618S and by Spanish projects MAT2015-67437-R (MINECO, Spain, FEDER, Spain, UE) and RTI2018-095052-B-I00 (MCIU/AEI/FEDER, UE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Strong and light cellular silicon carbonitride – Reduced graphene oxide material with enhanced electrical conductivity and capacitive response

  • Moyano, Juan J.
  • Mosa Ruiz, Jadra
  • Aparicio, Mario
  • Pérez-Coll, Domingo
  • Belmonte, Manuel
  • Miranzo López, Pilar
  • Osendi, María Isabel
[EN] Steady graphene oxide (GO) scaffolds created by direct ink writing are used to develop a silicon carbonitride (SiCN) -graphene oxide hybrid material through a preceramic polymer route. For achieving mechanically stable GO scaffolds, the drying method is critical as the ink contains about 5 wt.% of GO, 10 wt.% of polyelectrolytes and 85 wt.% of water. The liquid preceramic polymer (polysilazane type) quickly infiltrates the 3D scaffolds, under vacuum conditions, entirely covering the GO network creating a replica of the original scaffold. The hybrid cellular structure -once thermally treated for GO reduction and ceramic conversion- consists of a network of reduced GO (∼10 wt.%) embedded in an amorphous SiCN matrix following the designed architecture. The 3D hybrid structures show notable electrical conductivity (890 S m at room temperature), thermal stability and considerable strength, about 20 times higher than the single GO scaffold. The structures are tested as electrodes for supercapacitors, reaching a gravimetric capacitance of 39 F g that remains stable after 7000 charge/discharge cycles., This work was supported by Ministerio de Economía y Competitividad y el Fondo Europeo de Desarrollo Regional with project ref. MAT2015-67437-R (MINECO/FEDER, UE) JJM acknowledges the financial support of MINECO through the FPI contract ref: BES-2016-077759. The authors would like to thank Miguel Gómez for his support in the electrochemical tests.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Corrigendum to “Strong and light cellular silicon carbonitride – Reduced graphene oxide material with enhanced electrical conductivity and capacitive response’

  • Moyano, Juan J.
  • Mosa Ruiz, Jadra
  • Aparicio, Mario
  • Pérez-Coll, Domingo
  • Belmonte, Manuel
  • Miranzo López, Pilar
  • Osendi, María Isabel
[EN] The authors regret the mistake made when transcribing the gravimetric capacitance data reported in the previous article, the corrected values are as follows: The gravimetric capacitance was calculated using the discharge curves at different current densities, reaching 50.3, 39.1 and 41.3 F g−1 for 0.06, 0.60 and 2.40 A g−1, respectively. The authors wish to comment that these values do not alter the conclussions of the article, but rather accentuate the capacitive performance of the structures. The authors would like to apologise for any inconvenience caused., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The effect of rod orientation on the strength of highly porous filament printed 3D SiC ceramic architectures, Efecto de la orientación de los rodillos en la resistencia mecánica de estructuras 3D porosas de SiC fabricadas mediante impresión de filamento

  • Gómez-Gómez, Alberto
  • Moyano, Juan J.
  • Osendi, María Isabel
  • Belmonte, Manuel
  • Miranzo López, Pilar
[EN] The present work explores the strength enhancement via minor modifications of the pat-tern design in pure light SiC woodpile structures created by filament printing. In particular,the effect of the filament stacking angle on both the compression resistance and the elasticmodulus of these structures are evaluated. Different patterns were designed while main-taining the bulk structure density, therefore the differences in the mechanical data (strengthand elastic modulus) are not attributable to density variations. All of these materials werepartially sintered at intermediate temperature for additional porosity enhancement. More-over, SiC specimens made by full filament overlapping were produced to serve as referencemassive material. Remarkably, the massive SiC printed material displays ordered sphericalporosity and a closed-pore foam appearance, thus revealing a novel route for producingthese type of porosity. Results evidence that the structure robustness can be tuned throughslight design modification, which thus offers the possibility of further structure lighteningwithout reducing the target strength., [ES] El presente trabajo explora la mejora de la resistencia mecánica de estructuras ligeras for-madas por apilamiento de rodillos de SiC puro, procesadas por impresión directa de tinta, através de modificaciones menores del patrón de dise ̃no. En particular, se evalúa el efecto del ángulo de apilamiento de los filamentos sobre la resistencia a la compresión y el móduloelástico de estas estructuras. Los diferentes patrones fueron dise ̃nados manteniendo sim-ilares densidades aparentes de las estructuras, por lo tanto, las diferencias observadas enlos resultados mecánicos (resistencia y módulo elástico) no son atribuibles a variaciones dedensidad. Todas las estructuras se sinterizaron parcialmente para mantener una elevadaporosidad. Además, se produjeron muestras de SiC macizas creadas por la superposiciónde filamentos utilizadas como material masivo de referencia. Curiosamente, este materialmuestra una porosidad esférica y ordenada, y presenta la apariencia típica de esponjas conporosidad cerrada, mostrando en consecuencia una ruta alternativa para la fabricación deeste tipo de materiales celulares. Dado que la robustez de estructuras 3D se puede maximizara través de una ligera modificación del dise ̃no, esto permitiría alternativamente aligerar aúnmás las estructuras sin perjudicar su resistencia., This work was supported by projects MAT2015-67437-R and RTI2018-095052-B-I00 financed by the Ministerio de Ciencia, Innovación y Universidades MCIU (previously MINECO),Spain/FEDER (UE). J.J. Moyano acknowledges the financialsupport of MCIU/FEDER through the FPI contract ref: BES-2016-077759, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High graphene fillers content for improving the tribological performance of silicon nitride-based ceramics

  • Llorente, Javier
  • Ramírez, Cristina
  • Belmonte, Manuel
The effect of large graphene nanoplatelets (GNPs) additions on the friction and wear of silicon nitride (Si3N4) ceramics is evaluated under isooctane lubrication. All Si3N4/GNPs composites, with up to 20.6 vol% of graphene fillers, exhibit better tribological response than Si3N4, in particular, a 50% reduction in the friction that continuously decreases with the GNPs content is attained, jointly with an improvement in the wear resistance of up to 63%. The survival of a self-lubricant carbon-rich tribolayer formed on the worn surfaces controls the tribological properties of the materials. Si3N4/GNPs composites are promising materials to enhance the performance of gasoline direct injection systems., This work was supported by projects MAT2015-67437-R(MICINN,FEDER,UE) and RTI2018-095052-B-I00 (MICINN), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis doctoral (DoctoralThesis)

Caracterización tribológica de materiales compuestos cerámica/grafeno

  • Llorente, Javier
[EN] In this work, the tribological characterization of ceramic materiales containing high graphene nanostructures contents (up to 20 vol. %) is carried out. In particular, the effect of the addition of graphene nanoplatelets and graphene oxide in different ceramic matrices, such as silicon nitride, silicon carbide and cubic zirconia, is discussed, under dry and isooctane lubricated sliding conditions. It is described how, in general, high graphene nanostructres contents are needed to achieve significant improvements in friction and wear behaviour, which could permit to use of these materiales in, for example, gasolina direct injection systems. Moreover, the influence of the microstructural charateristics of both, the ceramic matrices and the graphene nanostructures is described, showing how these issue play a critical role in the tribological behaviour of these systems, being the most preferable situation, to use thin graphene nanostructures, due to its better integration in the ceramic matrix., [ES] ): En este trabajo se realiza la caracterización tribológica de materiales cerámicos con elevados contenidos de diferentes nanoestructuras de grafeno, de hasta el 20%. Vol. En particular, se estudia el efecto de la adición de nanoplaquetas de grafeno y óxido de grafeno en distintas matrices cerámicas: nitruro de silicio, carburo de silicio y circona cúbica, tanto bajo deslizamiento en seco como en lubricación con isooctano. Se describe como, en general, son necesarios contenidos elevados de nanoestructuras de grafeno para alcanzar mejoras en fricción y desgaste, que permitan el uso de estos materiales, por ejemplo, en sistemas de inyección directa de gasolina. Además se realiza un estudio de como las características microestructurales tanto de las nanoestructuras de grafeno utilizadas, como de las distintas matrices cerámicas, juegan un papel fundamental en las propiedades tribológicas de estos sistemas, siendo preferible el empleo de nanoestructuras finas, gracias a su mejor integración en la matriz cerámica., El trabajo experimental correspondiente a esta tesis doctoral se ha financiado a través de los proyectos MAT2012-32944 (MINECO), MAT2015-67437-R (MICINN. FEDER, UE) y RTI2018-095052-B-I00 (MCIU/AEI/FDER, UE)., Tribological performance under dry sliding conditions of graphene/silicon carbide composites. Journal of the European Ceramic Society. (2016). doi: 10.1016/j.jeurceramsoc.2015.09.040, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multifunctional 3D-Printed Cellular MAX-Phase Architectures

  • Belmonte, Manuel
  • Koller, Martin
  • Moyano, Juan J.
  • Seiner, Hanus
  • Miranzo López, Pilar
  • Osendi, María Isabel
  • González Julián, Jesús
[EN] The development of porous MAX-phase structures from computer-aided design models and 3D printing strategies is of great interest for the fabricating of cellular parts with geometric and material complexities for advanced technological applications. This is reinforced by the joining of the outstanding properties of MAX phases with the benefits of creating lighter materials with a higher surface area. Here, the additive manufacturing of 3D cellular CrAlC MAX-phase architectures using a direct ink writing technique from concentrated MAX aqueous-based inks is presented. These architectures exhibit multifunctional properties; in particular, high strength and good mechanical cycling behavior, excellent electrical conductivity, tailored heat dissipation, and good thermal cycling resistance, a blend that widens the potential engineering applications of these MAX phases through an innovative approach., This work was supported by Spanish MICINN/FEDER(UE) under project MAT2015-67437-R and by the Czech Science Foundation (Grant No. GA17-01618S). J. J. Moyano acknowledges the financial support of MINECO/FSE (UE) through the FPI contract ref: BES2016-077759 (2015 call). Authors thank Dr. D. Pérez-Coll for his experimental assistance in the electrical measurements., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Graphene-based nanostructures as catalysts for wet peroxide oxidation treatments: From nanopowders to 3D printed porous monoliths

  • Quintanilla, Asunción
  • Carbajo, J.
  • Casas, José A.
  • Miranzo López, Pilar
  • Osendi, María Isabel
  • Belmonte, Manuel
[EN] This paper explores the catalytic behaviour of different graphene-based nanostructures for the treatment of wastewater using Catalytic Wet Peroxide Oxidation (CWPO) processes. In a first stage, graphene-based nanopowders with distinct physical-chemical characteristics are tested in the CWPO of phenol using the following standard operating conditions: [Phenol] = 1 g·L, [HO] = 5 g L and 80 °C. Graphene nanoplatelets with the lowest oxygen content exhibit the highest catalytic activity. The typical phenol oxidation by-products are detected in the liquid phase while CO and CO appear in the gas phase. Afterwards, three dimensional (3D) porous graphene monoliths (D ∼ 11.5 mm, H ∼ 4 mm, D ∼ 0.68 mm and δ =0.36 cm, 75 cells·cm, ε = 41%) based on those nanoplatelets are additive manufactured using a direct ink writing technique and, then, tested under similar CWPO conditions. The results evidence that the 3D graphene-based structures are catalytically active, though they undergo a progressive deactivation due to the deposition of organic matter. The graphene-based monoliths can be regenerated by thermal treatments, allowing their use at industrial scale by means of reaction-thermal regeneration cycles., The authors thank the financial support by the Spanish Ministerio de Ciencia, Innovación y Universidades (MICINN) and FEDER program (EU) through the projects: CTM2016-76454-R (MICINN), MAT2015-67437-R (MICINN/ FEDER,UE) and RTI2018-095052-B-I00 (MICINN).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Low percolation threshold in highly conducting graphene nanoplatelets/glass composite coatings

  • Nistal, Andrés
  • García, Eugenio
  • Pérez-Coll, Domingo
  • Prieto, Carlos
  • Belmonte, Manuel
  • Osendi, María Isabel
  • Miranzo López, Pilar
[EN] Thermal sprayed thick glass coatings with a small percentage of multilayer graphene nanoplatelets (GNP) demonstrate electrical functionality with a quite remarkable low percolation limit (1.18 vol.%). This low critical content and the high electrical conductivity (~40 S m¿1) observed for the in-plane direction are related to the peculiar coating microstructure, formed by the pileup of lamellar amorphous particles decorated by GNP mostly following a surface parallel orientation. The general effective media model fitting to the electrical conductivity data for these coatings suggests a 3D connectivity of graphene and estimates an upper limit conductivity for the GNP of 105 S m¿1. Hall effect shows the n-type behavior intrinsic to the SiO2/graphene interface, and carrier density and mobility rising with the GNP content. In addition, the coatings evidence a very high solar absorptivity that jointly with their high electrical conductivity broadens their potential applications, among others, for electromagnetic interference shielding or as photothermal detector and solar absorber for solar steam generation and water desalination., This work was financed by project MAT2015-67437-R (MINECO/FEDER, UE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The influence of the catalyst on the CO formation during catalytic wet peroxide oxidation process

  • Carbajo, J.
  • Quintanilla, Asunción
  • García-Costa, A.L.
  • González Julián, Jesús
  • Belmonte, Manuel
  • Miranzo López, Pilar
  • Osendi, María Isabel
  • Casas, José A.
[EN] Herein, the formation of carbon monoxide as a harmful product upon the Catalytic Wet Peroxide Oxidation process is studied in presence of different solid catalysts: an iron supported activated carbon catalyst, a metal-free catalyst based on Graphene Nanoplatelets, and 1.6 wt.% Fe containing CrAlC MAX phase catalyst. The CWPO performance and the evolution of the gas effluent have been compared to that obtained in a conventional Fenton process. Carbon monoxide yield released was significantly lower in Catalytic Wet Peroxide Oxidation process in relation to that obtained in the Fenton process, where CO concentration reaches a maximum of 6651 mg/Nm. By contrast, in presence of activated carbon-Fe catalyst and, notably, Graphene Nanoplatelets and CrAlC MAX phase catalysts, a more progressive phenol and aromatics intermediates oxidation resulted in a much lower CO maximum concentration in the gas phase at the exit of the reactor of 2454 mg/Nm, 170 mg/Nm and 187 mg/Nm, respectively. Hence, when compared to the homogeneous Fenton oxidation, Catalytic Wet Peroxide Oxidation process results be a more sustainable treatment for high-loaded phenolic wastewaters by decreasing the hazardous CO gaseous emissions avoiding this way a secondary pollution during the oxidation process., This work was supported by the following project: CTM2016-76454-R and MAT2015-67437-R (Ministerio de Economía y Competititivad, MINECO). J. Carbajo wants to thank the Ministerio de Ciencia, Innovación y Universidades (MICIU) for a grant under the Juan de la Cierva_Incorporación programme (IJCI-2017-32682)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Anisotropic Elasticity of Ceramic Micro-Scaffolds Fabricated by Robocasting

  • Koller, Martin
  • Kruisová, A.
  • Seiner, Hanus
  • Sedlák, Petr
  • Román-Manso, Benito
  • Miranzo López, Pilar
  • Belmonte, Manuel
  • Landa, Michal
[EN] Anisotropic elastic and acoustic properties of robocast ceramic scaffolds are calculated by finite element method, utilizing real geometries and material parameters obtained from robocast silicon carbide samples. Six types of robocast geometries are studied, showing different material symmetries given by the arrangement of the ceramic rods in the scaffold structures. Due to the macroscopic periodicity of the structures composed of fully sintered ceramic rods, the robocast scaffolds exhibit metamaterial-like elastic and acoustic properties, never observed for natural materials. The effect of the micro-architecture is shown to be crucial: while for tetragonal and orthorhombic structures, strong acoustic focusing along the directions of the rods appears even in the low-frequency limit, hexagonal structures exhibit no energy focusing up to some frequency limit given by the geometry., This work was supported by the Czech Science Foundation (Grant No. GA17-01618S), and by Spanish project MAT2015-67437-R (MINECO, FEDER, UE).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Protein adsorption and in vitro behavior of additively manufactured 3D-silicon nitride scaffolds intended for bone tissue engineering

  • Sainz Trigo, M. Antonia
  • Serena Palomares, Sara
  • Belmonte, Manuel
  • Osendi, María Isabel
[EN] Highly porous scaffolds of SiN are fabricated by direct ink writing method (Robocasting) with a pattern of macroporous cavities of 650–700 μm. Two different SiN ink compositions regarding the oxide sintering aids (namely, YO, AlO, and SiO) are tried. Both inks reach solid volume fractions of ~0.40 with about 10–12 wt% of polymeric additive content that imparts the necessary pseudoplastic characteristics. The printed structures are sintered under controlled N atmosphere either in a conventional graphite furnace or by the spark plasma sintering technique. Skeleton of the scaffolds reaches densities above 95% of the theoretical value with ≈18–24% of linear shrinkage. Analysis of the crystalline phases, microstructure and mechanical properties are comparatively done for both compositions. The bioactivity of these structures is addressed by evaluating the ion release rate in simulated body fluid. In parallel, atomic force microscopy is used to determine the effect of the filaments surface roughness on protein adsorption (Bovine Serum Albumin) for assessing the potential application of 3D-SiN scaffolds in bone regeneration., Authors declare that there are no conflicts of interests. This work was supported by MICINN (Spain)/FEDER (UE) with projects: MAT2015-67437-R and RTI2018-095052-B-100