Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Open-End Winding Induction Machine Fed by a Dual-Output Indirect Matrix Converter

  • Riedemann, Javier
  • Clare, J.C.
  • Wheeler, P.W.
  • Rivera, Marco
  • Peña, Rubén
  • Blasco-Gimenez, Ramon|||0000-0003-3427-1581
[EN] Open-ended winding induction machines fed from standard two-level voltage source inverters (VSIs) provide an attractive arrangement for ac drives. An alternative approach is to use a dual-output indirect matrix converter (IMC). It is well known that the IMC provides fully bidirectional power flow operation, with small input size filter requirements. While a standard IMC consists of an ac dc matrix converter (MC) input stage followed by a single VSI output stage, it is possible to replicate the VSI to produce multiple outputs. In this paper, an open-end winding induction machine fed by an IMC with two output stages is presented. The IMC modulation strategy aims to reduce the common-mode voltage (CMV), while compensating any zero-sequence voltage fed to the machine. The system is modeled using a PSIM and MATLAB/Simulink platform. Experimental results demonstrating the viability of the method are presented using a 7.5-kW prototype., This work was supported in part by the Fondecyt/1151325, in part by the CONICYT/FONDAP/15110019, and in part by The Newton Picarte Project EPSRC: EP/N004043/1: New Configurations of Power Converters for Grid Interconnection Systems/CONICYT DPI20140007.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A multilevel modular DC DC converter topology

  • Vidal, R.
  • Soto, D.
  • Andrade, I.
  • Riedemann, J.
  • Pesce, C.
  • Belenguer, E.
  • Pena, R.
  • Blasco-Gimenez, Ramon|||0000-0003-3427-1581
[EN] A multilevel modular DC DC power conversion topology based on cascaded H-Bridge converters in a double II configuration is presented. The topology is intended to interconnect large power DC networks. A two level control hierarchy is used to regulate the DC voltage of each H-bridge module. At the top level, DC and circulating AC currents are used to control the total energy converter in all branches (both parallels and series) of each II arrange. At bottom level, the voltage balance of a converter branch, which comprises N H-bridge modules, is carried out by balancing (N-1) capacitor voltage deviations, with respect to the average capacitor voltage. The entire topology and control strategies are simulated in a PSIM environment. Simulation results with three H-bridge converters per branch are shown and preliminary experimental results with a low power prototype are also included., This work was supported by Fondecyt grant 1151325, CONICYT/FONDAP/15110019, The Spanish Ministry of Economy and EU FEDER funds under grant DPI2014-53245-R, The University of Magallanes grant PR-FI-02IE14/15, Universitat Jaume I grant P1.1B2013-51, the Newton Picarte Project EPSRC:EP/N004043/1 and CONICYT DPI20140007.