Pasar al contenido principal

ASIMILACION DE DATOS PARA UNA SIMULACION INGENIERIL CREIBLE

DPI2017-85139-C2-2-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 62
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Proper Generalized Decomposition solutions within a Domain Decomposition strategy

  • Huerta, Antonio
  • Chinesta Soria, Francisco Jose
  • Nadal, Enrique|||0000-0002-2808-298X
[EN] Domain decomposition strategies and proper generalized decomposition are efficiently combined to obtain a fast evaluation of the solution approximation in parameterized elliptic problems with complex geometries. The classical difficulties associated to the combination of layered domains with arbitrarily oriented midsurfaces, which may require in-plane-out-of-plane techniques, are now dismissed. More generally, solutions on large domains can now be confronted within a domain decomposition approach. This is done with a reduced cost in the offline phase because the proper generalized decomposition gives an explicit description of the solution in each subdomain in terms of the solution at the interface. Thus, the evaluation of the approximation in each subdomain is a simple function evaluation given the interface values (and the other problem parameters). The interface solution can be characterized by any a priori user-defined approximation. Here, for illustration purposes, hierarchical polynomials are used. The repetitiveness of the subdomains is exploited to reduce drastically the offline computational effort. The online phase requires solving a nonlinear problem to determine all the interface solutions. However, this problem only has degrees of freedom on the interfaces and the Jacobian matrix is explicitly determined. Obviously, other parameters characterizing the solution (material constants, external loads, and geometry) can also be incorporated in the explicit description of the solution., European Commission, Grant/Award Number: MSCA ITN-ETN 675919; ESI group, Grant/Award Number: ENSAM ESI Chair; Spanish Ministry of Economy and Competitiveness, Grant/Award Number: DPI2017-85139-C2-2-R; Generalitat de Catalunya, Grant/Award Number: 2014SGR1471
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Numerical_Model_WM_Peral_et_al_2022

  • Peral, M.
  • Fernández Ortiga, Manel
  • Vergés Masip, Jaume
  • Zlotnik, Sergio
  • Jimenez-Munt, Ivone
The geodynamic evolution of the Western Mediterranean related to the closure of the Ligurian-Tethys ocean is not yet fully resolved. We present a new 3D numerical model of double subduction with opposite polarities fostered by the inherited segmentation of the Ligurian-Tethys margins and rifting system between Iberia and NW Africa. The model is constrained by plate kinematic reconstructions and assumes that both Alboran-Tethys and Algerian-Tethys plate segments are separated by a NW-SE transform zone enabling that subduction polarity changes from SE-dipping in the Alboran-Tethys segment to NW-dipping in the Algerian-Tethys segment. The model starts about late Eocene times at 36.5 Ma and the temporal evolution of the simulation is tied to the geological evolution by comparing the rates of convergence and trench retreat, and the onset and end of opening in the Alboran Basin. Curvature of the Alboran- Tethys slab is imposed by the pinning of its western edge when reaching the end of the transform zone in the adjacent west-Africa continental block. The progressive curvature of the trench explains the observed regional stress reorientation changing from N-S to NW-SE and to E-W in the central and western regions of the Alboran Basin. The increase of the retreat rates from the Alboran- Tethys to the Algerian-Tethys slabs is compatible with the west-to-east transition from continental-to-magmatic-to-oceanic crustal nature and with the massive and partially synchronous calc-alkaline and alkaline magmatism. Alkaline magmatism is related to the induced sublithospheric mantle flow by the double subduction system depicting a NE-SW upwelling trend., This work is funded by the SUBTETIS (PIE-CSIC-201830E039, CSIC), ALORBE (PIE- CSIC-202030E310), GeoCAM (PGC2018-095154-B-I00, Spanish Government), Equinor R&T Fornebu (Norway), and the Generalitat de Catalunya grant (AGAUR 2017 SGR 847). We also thank the computer resources at MareNostrum and the technical support provided by the Barcelona Supercomputing Center (BSC) through several projects (AECT-2019-1-0013 and AECT-2019-2-0005). S. Z. has been funded by the Spanish Ministry through Grant DPI2017-85139-C2-2-R, by the Catalan Government through Grant 2017-SGR-1278, and by the EU's Horizon 2020 Research and Innovation Programme under the Marie Sklodowska-Curie Grant Agreement 777778. This work has been done in the framework of the Unidad Asociada of LACAN-UPC with CSIC and using the facilities of the Laboratory of Geodynamic Modeling from Geo3BCN-CSIC., Numerical experiments are named M1 and M2. M1: Alboran-Algerian system; M2: Alboran system, according to Figure S2 in Peral et al., 2022. Increasing numbers indicate different timesteps of each experiment., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Separated response surfaces for flows in parametrised domains: comparison of a priori and a posteriori PGD algorithms

  • Giacomini, Matteo|||0000-0001-6094-5944
  • Borchini, Luca
  • Sevilla Cárdenas, Rubén|||0000-0002-0061-6214
  • Huerta, Antonio|||0000-0003-4198-3798
© 2021 Elsevier. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Reduced order models (ROM) are commonly employed to solve parametric problems and to devise inexpensive response surfaces to evaluate quantities of interest in real-time. There are many families of ROMs in the literature and choosing among them is not always a trivial task. This work presents a comparison of the performance of a priori and a posteriori proper generalised decomposition (PGD) algorithms for an incompressible Stokes flow problem in a geometrically parametrised domain. This problem is particularly challenging as the geometric parameters affect both the solution manifold and the computational spatial domain. The difficulty is further increased because multiple geometric parameters are considered and extended ranges of values are analysed for the parameters and this leads to significant variations in the flow features. Using a set of numerical experiments involving geometrically parametrised microswimmers, the two PGD algorithms are extensively compared in terms of their accuracy and their computational cost, expressed as a function of the number of full-order solves required., This work was partially supported by the European Union’s Horizon 2020 research and innovation programme under the Marie Sk lodowska-Curie Actions (Grant number: 675919) that financed the Ph.D. fellowship of L.B. and by the Spanish Ministry of Economy and Competitiveness (Grant number: DPI2017-85139-C2-2-R). M.G. and A.H. are also grateful for the support provided by the Spanish Ministry of Economy and Competitiveness through the Severo Ochoa programme for centres of excellence in RTD (Grant number: CEX2018-000797-S) and the Generalitat de Catalunya (Grant number: 2017-SGR-1278). R.S. also acknowledges the support of the Engineering and Physical Sciences Research Council (Grant number: EP/P033997/1)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Nonintrusive proper generalised decomposition for parametrised incompressible flow problems in OpenFOAM

  • Tsiolakis, Vasileios
  • Giacomini, Matteo|||0000-0001-6094-5944
  • Sevilla Cárdenas, Rubén|||0000-0002-0061-6214
  • Othmer, Carsten
  • Huerta, Antonio|||0000-0003-4198-3798
The computational cost of parametric studies currently represents the major limitation to the application of simulation-based engineering techniques in a daily industrial environment. This work presents the first nonintrusive implementation of the proper generalised decomposition (PGD) in OpenFOAM, for the approximation of parametrised laminar incompressible Navier–Stokes equations. The key feature of this approach is the seamless integration of a reduced order model (ROM) in the framework of an industrially validated computational fluid dynamics software. This is of special importance in an industrial environment because in the online phase of the PGD ROM the description of the flow for a specific set of parameters is obtained simply via interpolation of the generalised solution, without the need of any extra solution step. On the one hand, the spatial problems arising from the PGD separation of the unknowns are treated using the classical solution strategies of OpenFOAM, namely the semi-implicit method for pressure linked equations (SIMPLE) algorithm. On the other hand, the parametric iteration is solved via a collocation approach. The resulting ROM is applied to several benchmark tests of laminar incompressible Navier–Stokes flows, in two and three dimensions, with different parameters affecting the flow features. Eventually, the capability of the proposed strategy to treat industrial problems is verified by applying the methodology to a parametrised flow control in a realistic geometry of interest for the automotive industry., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Nonintrusive uncertainty quantification for automotive crash problems with VPS/Pamcrash

  • Rocas Alonso, Marc
  • García González, Alberto|||0000-0003-2841-016X
  • Zlotnik, Sergio|||0000-0001-9674-8950
  • Larráyoz Izcara, Xabier
  • Díez, Pedro|||0000-0001-6464-6407
© 2021 Elsevier. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Uncertainty Quantification (UQ) is a key discipline for computational modeling of complex systems, enhancing reliability of engineering simulations. In crashworthiness, having an accurate assessment of the behavior of the model uncertainty allows reducing the number of prototypes and associated costs. Carrying out UQ in this framework is especially challenging because it requires highly expensive simulations. In this context, surrogate models (metamodels) allow drastically reducing the computational cost of Monte Carlo process. Different techniques to describe the metamodel are considered, Ordinary Kriging, Polynomial Response Surfaces and a novel strategy (based on Proper Generalized Decomposition) denoted by Separated Response Surface (SRS). A large number of uncertain input parameters may jeopardize the efficiency of the metamodels. Thus, previous to define a metamodel, kernel Principal Component Analysis (kPCA) is found to be effective to simplify the model outcome description. A benchmark crash test is used to show the efficiency of combining metamodels with kPCA., This work is partially funded by Generalitat de Catalunya (Grant Number 1278 SGR 2017-2019 and Pla de Doctorats Industrials 2017 DI 058) and Ministerio de Econom´ıa y Empresa and Ministerio de Ciencia, Innovaci´on y Universidades (Grant Number DPI2017-85139-C2-2-R)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Using reduced basis approximation for efficient surrogate-based inverse identification of thermo-hydro-mechanical parameters from an in situ heating test

  • Larion, Ygee
  • Chen, Guangjing
  • Zlotnik, Sergio|||0000-0001-9674-8950
  • Díez, Pedro|||0000-0001-6464-6407
  • Seetharam, Suresh
  • Massart, Thierry J.
The version of record is available online at: http://dx.doi.org/10.1007/s00603-022-02925-5, In this paper, a reduced-order model built from the reduced basis (RB) method is used as a surrogate for an inverse identification problem related to coupled thermo-hydro-mechanical (THM) processes. The RB space—spanned by solutions of the governing THM equations—is constructed using a greedy adaptive procedure guided by an a posteriori error estimator that selects the optimal snapshot points in a given parametric space. The RB model is assessed in terms of accuracy and computational cost reduction for the three-dimensional transient coupled problem described by the ATLAS III small-scale in situ heating test. The substantial system size reduction and the associated significant computational gain result in a surrogate model suitable for parameter identification procedures in the Boom Clay material. The effectiveness of the proposed strategy is demonstrated by performing inverse analysis based on direct-search and genetic algorithm (GA) optimization supported by real sensor measurement data where 800 times faster computational speed-up was achieved., We acknowledge the funding support from the European Commission Education, Audiovisual and Culture Executive Agency (EACEA) under Erasmus Mundus Joint Doctorate Simulation in Engineering and Entrepreneurship Development (SEED), FPA 2013-0043 and SCK CEN for funding the 4th year PhD study of the first author. S. Zlotnik and P. Díez would like to thank the funding from the Generalitat de Catalunya 2017-SGR-1278, the project DPI2017-85139-C2-2-R funded by the Spanish Ministry and the project H2020-RISE MATHROCKS GA no. 777778., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Opposite subduction polarity in adjacent plate segments

  • Peral, Mireia
  • Kiraly, Agnes
  • Zlotnik, Sergio|||0000-0001-9674-8950
  • Funiciello, Francesca
  • Fernandez Ortiga, Manel
  • Faccenna, Claudio
  • Vergés, Jaume
Active and fossil subduction systems consisting of two adjacent plates with opposite retreating directions occur in several areas on Earth, as the Mediterranean or Western Pacific. The goal of this work is to better understand the first-order plate dynamics of these systems using the results of experimental models. The laboratory model is composed of two separate plates made of silicon putty representing the lithosphere, on top of a tank filled with glucose syrup representing the mantle. The set of experiments is designed to test the influence of the width of plates and the initial separation between them on the resulting trench velocities, deformation of plates, and mantle flow. Results show that the mantle flow induced by both plates is asymmetric relative to the axis of each plate causing a progressive merging of the toroidal cells that prevents a steady state phase of the subduction process and generates a net outward drag perpendicular to the plates. Trench velocities increase when trenches approach each other and decrease when they separate after their intersection. The trench curvature of both plates increases linearly with time during the entire evolution of the process regardless their width and initial separation. The interaction between the return flows associated with each retreating plate, particularly in the interplate region, is stronger for near plate configurations and correlates with variations of rollback velocities. We propose that the inferred first-order dynamics of the presented analog models can provide relevant clues to understand natural complex subduction systems, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A superconvergent HDG method for stokes flow with strongly enforced symmetry of the stress tensor

  • Giacomini, Matteo|||0000-0001-6094-5944
  • Karkoulias, Alexandros
  • Sevilla Cárdenas, Rubén|||0000-0002-0061-6214
  • Huerta, Antonio|||0000-0003-4198-3798
The final publication is available at Springer via http://dx.doi.org/10.1007/s10915-018-0855-y, This work proposes a superconvergent hybridizable discontinuous Galerkin (HDG) method for the approximation of the Cauchy formulation of the Stokes equation using same degree of polynomials for the primal and mixed variables. The novel formulation relies on the well-known Voigt notation to strongly enforce the symmetry of the stress tensor. The proposed strategy introduces several advantages with respect to the existing HDG formulations. First, it remedies the suboptimal behavior experienced by the classical HDG method for formulations involving the symmetric part of the gradient of the primal variable. The optimal convergence of the mixed variable is retrieved and an element-by-element postprocess procedure leads to a superconvergent velocity field, even for low-order approximations. Second, no additional enrichment of the discrete spaces is required and a gain in computational efficiency follows from reducing the quantity of stored information and the size of the local problems. Eventually, the novel formulation naturally imposes physical tractions on the Neumann boundary. Numerical validation of the optimality of the method and its superconvergent properties is performed in 2D and 3D using meshes of different element types., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A locking-free face-centred finite volume (FCFV) method for linear elastostatics

  • Sevilla Cárdenas, Rubén|||0000-0002-0061-6214
  • Giacomini, Matteo|||0000-0001-6094-5944
  • Huerta, Antonio|||0000-0003-4198-3798
A face-centred finite volume (FCFV) method is proposed for linear elastostatic problems. The FCFV is a mixed hybrid formulation, featuring a system of first-order equations, that defines the unknowns on the faces (edges in two dimensions) of the mesh cells. The symmetry of the stress tensor is strongly enforced using the well-known Voigt notation and the displacement and stress fields inside each cell are obtained by means of explicit formulas. The resulting FCFV method is robust and locking-free in the nearly incompressible limit. Numerical experiments in two and three dimensions show optimal convergence of the displacement and the stress fields without any reconstruction. Moreover, the accuracy of the FCFV method is not sensitive to mesh distortion and stretching. Classical benchmark tests including Kirch’s plate and Cook’s membrane problems in two dimensions as well as three dimensional problems involving shear phenomenons, pressurised thin shells and complex geometries are presented to show the capability and potential of the proposed methodology., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Towards real time assessment of earthfill dams via Model Order Reduction

  • Nasika, Christina
  • Díez, Pedro|||0000-0001-6464-6407
  • Gerard, Pierre
  • Massart, Thierry J.
  • Zlotnik, Sergio|||0000-0001-9674-8950
© 2022 Elsevier. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, The use of Internet of Things (IoT) technologies is becoming a preferred solution for the assessment of tailings dams’ safety. Real-time sensor monitoring proves to be a key tool for reducing the risk related to these ever-evolving earth-fill structures, that exhibit a high rate of sudden and extremely hazardous failures. In order to optimally exploit real-time embankment monitoring, one major hindrance has to be overcome: the creation of a supporting numerical model for stability analysis, with rapid-enough response to perform data assimilation in real time. A model should therefore be built, such that its response can be obtained faster than the physical evolution of the phenomenon to be analyzed. In this work, Reduced Order Modeling (ROM) is used to boost computational efficiency in solving the coupled hydromechanical system of equations governing the problem. POD-based reduction has been studied in order to treat the problem of groundwater flow, coupled to the geomechanical problem. The Reduced Basis method is applied to the coupled hydro-mechanical equations that govern the flow of groundwater, that are made non-linear as a result of considering an unsaturated soil. The resulting model’s performance is assessed by solving a 2D and a 3D problem relevant to tailings dams’ safety. The ROM technique achieves a speedup of 3 to 15 times with respect to the full-order model (FOM) while maintaining high levels of accuracy., This work has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie SklodowskaCurie grant agreement No 764636, for the research project ProTechTion. We thank Professor Sebatian Olivella (Escola de Camins, Universitat Politècnica de Catalunya) for his much appreciated assistance. Pedro Díez and Sergio Zlotink are grateful for the financial support provided by the Spanish Ministry of Economy and Competitiveness (Grant agreement No. DPI2017-85139-C2-2-R), by the Generalitat de Catalunya (Grant agreement No. 2017-SGR-1278), and by project H2020-RISE MATH-ROCKS GA no 777778., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Fast solution of elliptic harbor agitation problems under frequency-direction input spectra by model order reduction and NURBS-enhanced FEM

  • Modesto Galende, David|||0000-0001-9540-8815
  • Ye, Boyi
  • Zlotnik, Sergio|||0000-0001-9674-8950
  • Huerta, Antonio|||0000-0003-4198-3798
© 2020. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Many harbor applications are based on the solution of linear elliptic agitation problems for many spectral conditions. One of the main goals consists in computing the linear combination of numerous simulations of the harbor agitation problem, using monochromatic waves of different spectral components (i.e. frequency and incoming wave direction). In practice, the standard strategy selects the number of wave components according to a prescribed discretization of the 2D input spectra. The main issue relies on some quantities of interest that are very sensitive to the level of refinement of the spectra, such as the significant wave height at every mesh point or the identification of resonance modes induced by long wave scattering. In many cases, achieving enough quality in these quantities may impose numerous simulations and, consequently, non-practical computer costs. This can drastically limit the final accuracy of results. To overcome this situation, here a new strategy is proposed to efficiently solve a large number of harbor agitation problems derived from dense discretizations of the 2D input spectra. The strategy is based on the combination of two different numerical approaches. Firstly, each required monochromatic simulation is solved via high order NURBS (non-uniform rational B-splines) enhanced finite elements (NEFEM). More precisely, NEFEM captures the exact harbor geometry using large mesh elements that produce accurate solutions and significant savings on the system size, particularly in long wave cases. Secondly, a model order reduction technique is used to approximate the original elliptic harbor model by a so-called surrogate model. The main advantage is that, once the surrogate model is constructed, it can be rapidly evaluated to provide simulations for any value of the spectral components within a range of interest, and without the need of solving any new harbor agitation problem (as the standard strategy does). Thus, this enables the possibility of using any desired discretization of the 2D input spectra with no additional computer cost. The construction of the surrogate model is performed using the proper generalized decomposition method with a novel incremental computation along the frequency dimension. The proposed strategy is discussed, and its superior performance with respect to standard strategies is demonstrated, on two harbor agitation examples with several applications., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Hybridisable discontinuous Galerkin solution of geometrically parametrised Stokes flows

  • Sevilla Cárdenas, Rubén|||0000-0002-0061-6214
  • Borchini, Luca
  • Giacomini, Matteo|||0000-0001-6094-5944
  • Huerta, Antonio|||0000-0003-4198-3798
© 2020. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, This paper proposes a novel computational framework for the solution of geometrically parametrised flow problems governed by the Stokes equation. The proposed method uses a high-order hybridisable discontinuous Galerkin formulation and the proper generalised decomposition rationale to construct an off-line solution for a given set of geometric parameters. The generalised solution contains the information for all the geometric parameters in a user-defined range and it can be used to compute sensitivities. The proposed approach circumvents many of the weaknesses of other approaches based on the proper generalised decomposition for computing generalised solutions of geometrically parametrised problems. Four numerical examples show the optimal mesh convergence properties of the proposed method and demonstrate its applicability in two and three dimensions, with particular emphasis on parametrised flows in microfluidics., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A second-order face-centred finite volume method for elliptic problems

  • Vieira, Luan M.
  • Giacomini, Matteo|||0000-0001-6094-5944
  • Sevilla Cárdenas, Rubén|||0000-0002-0061-6214
  • Huerta, Antonio|||0000-0003-4198-3798
© 2020 Elsevier. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, A second-order face-centred finite volume method (FCFV) is proposed. Contrary to the more popular cell-centred and vertex-centred finite volume (FV) techniques, the proposed method defines the solution on the faces of the mesh (edges in two dimensions). The method is based on a mixed formulation and therefore considers the solution and its gradient as independent unknowns. They are computed solving an element-by-element problem after the solution at the faces is determined. The proposed approach avoids the need of reconstructing the solution gradient, as required by cell-centred and vertex-centred FV methods. This strategy leads to a method that is insensitive to mesh distortion and stretching. The current method is second-order and requires the solution of a global system of equations of identical size and identical number of non-zero elements when compared to the recently proposed first-order FCFV. The formulation is presented for Poisson and Stokes problems. Numerical examples are used to illustrate the approximation properties of the method as well as to demonstrate its potential in three dimensional problems with complex geometries. The integration of a mesh adaptive procedure in the FCFV solution algorithm is also presented., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A combined reduced order-full order methodology for the solution of 3D magneto-mechanical problems with application to magnetic resonance imaging scanners

  • Seoane Chouciño, Marcos
  • Ledger, Paul D.
  • Gil, Antonio
  • Zlotnik, Sergio|||0000-0001-9674-8950
  • Mallett, Mike
This is the peer reviewed version of the following article: Seoane, M. [et al.]. A combined reduced order-full order methodology for the solution of 3D magneto-mechanical problems with application to magnetic resonance imaging scanners. "International journal for numerical methods in engineering", 1 Gener 2020, vol. 121, núm. 16, p. 3529-3559. , which has been published in final form athttps://onlinelibrary.wiley.com/doi/abs/10.1002/nme.6369. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving., The design of a new magnetic resonance imaging (MRI) scanner requires multiple numerical simulations of the same magneto-mechanical problem for varying model parameters, such as frequency and electric conductivity, in order to ensure that the vibrations, noise, and heat dissipation are minimized. The high computational cost required for these repeated simulations leads to a bottleneck in the design process due to an increased design time and, thus, a higher cost. To alleviate these issues, the application of reduced order modeling techniques, which are able to find a general solution to high-dimensional parametric problems in a very efficient manner, is considered. Building on the established proper orthogonal decomposition technique available in the literature, the main novelty of this work is an efficient implementation for the solution of 3D magneto-mechanical problems in the context of challenging MRI configurations. This methodology provides a general solution for varying parameters of interest. The accuracy and efficiency of the method are proven by applying it to challenging MRI configurations and comparing with the full-order solution., Generalitat de Catalunya, 2017‐SGR‐1278; Marie Sklodowska‐Curie Innovative Training Network AdMoRe, 675919; Spanish Ministry of Economy and Competitiveness, DPI2017‐85139‐C2‐2‐R, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Sampling-based stochastic analysis of the PKN model for hydraulic fracturing

  • Garikapati, Hasini
  • Verhoosel, Clemens V.
  • van Brummelen, Harald
  • Zlotnik, Sergio|||0000-0001-9674-8950
  • Díez, Pedro|||0000-0001-6464-6407
The final publication is available at Springer via http://dx.doi.org/10.1007/s10596-018-9784-y, Hydraulic fracturing processes are surrounded by uncertainty, as available data is typically scant. In this work, we present a sampling-based stochastic analysis of the hydraulic fracturing process by considering various system parameters to be random. Our analysis is based on the Perkins-Kern-Nordgren (PKN) model for hydraulic fracturing. This baseline model enables computation of high fidelity solutions, which avoids pollution of our stochastic results by inaccuracies in the deterministic solution procedure. In order to obtain the desired degree of accuracy of the computed solution, we supplement the employed time-dependent moving-mesh finite element method with two new enhancements: (i) global conservation of volume is enforced through a Lagrange multiplier; (ii) the weakly singular behavior of the solution at the fracture tip is resolved by supplementing the solution space with a tip enrichment function. This tip enrichment function enables the computation of the tip speed directly from its associated solution coefficient. A novel incremental-iterative solution procedure based on a backward-Euler time-integrator with sub-iterations is employed to solve the PKN model. Direct Monte-Carlo sampling is performed based on random variable and random field input parameters. The presented stochastic results quantify the dependence of the fracture evolution process—in particular the fracture length and fracture opening—on variations in the elastic properties and leak-off coefficient of the formation, and the height of the fracture., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Error estimation for proper generalized decomposition solutions: dual analysis and adaptivity for quantities of interest

  • Reis, Jonatha
  • Almeida, José Paulo Moitinho de
  • Díez, Pedro|||0000-0001-6464-6407
  • Zlotnik, Sergio|||0000-0001-9674-8950
This is the peer reviewed version of the following article: Reis, J. [et al.]. Error estimation for proper generalized decomposition solutions: dual analysis and adaptivity for quantities of interest. "International journal for numerical methods in engineering", 15 Febrer 2021, vol. 122, núm. 3, p. 752-776, which has been published in final form at https://onlinelibrary.wiley.com/doi/10.1002/nme.6559. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving., When designing a structure or engineering a component, it is crucial to use methods that provide fast and reliable solutions, so that a large number of design options can be assessed. In this context, the proper generalized decomposition (PGD) can be a powerful tool, as it provides solutions to parametric problems, without being affected by the “curse of dimensionality.” Assessing the accuracy of the solutions obtained with the PGD is still a relevant challenge, particularly when seeking quantities of interest with guaranteed bounds. In this work, we compute compatible and equilibrated PGD solutions and use them in a dual analysis to obtain quantities of interest and their bounds, which are guaranteed. We also use these complementary solutions to compute an error indicator, which is used to drive a mesh adaptivity process, oriented for a quantity of interest. The corresponding solutions have errors that are much lower than those obtained using a uniform refinement or an indicator based on the global error, as the proposed approach focuses on minimizing the error in the quantity of interest., Education, Audiovisual and Culture Executive Agency, FPA 2013‐0043; Generalitat de Catalunya, No. 2017‐SGR‐1278; H2020 Marie Skłodowska‐Curie Actions, MATH‐ROCKS GA no 777778.; Ministerio de Economía y Competitividad, No. DPI2017‐85139‐C2‐2‐R, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A Proper Generalized Decomposition (PGD) approach to crack propagation in brittle materials: with application to random field material properties

  • Garikapati, Hasini
  • Zlotnik, Sergio|||0000-0001-9674-8950
  • Díez, Pedro|||0000-0001-6464-6407
  • Verhoosel, Clemens V.
  • van Brummelen, Harald
The final publication is available at Springer via http://dx.doi.org/10.1007/s00466-019-01778-0, Understanding the failure of brittle heterogeneous materials is essential in many applications. Heterogeneities in materialproperties are frequently modeled through random fields, which typically induces the need to solve finite element problemsfor a large number of realizations. In this context, we make use of reduced order modeling to solve these problems at anaffordable computational cost. This paper proposes a reduced order modeling framework to predict crack propagation in brittlematerials with random heterogeneities. The framework is based on a combination of the Proper Generalized Decomposition(PGD) method with Griffith’s global energy criterion. The PGD framework provides an explicit parametric solution forthe physical response of the system. We illustrate that a non-intrusive sampling-based technique can be applied as a post-processing operation on the explicit solution provided by PGD. We first validate the framework using a global energy approachon a deterministic two-dimensional linear elastic fracture mechanics benchmark. Subsequently, we apply the reduced ordermodeling approach to a stochastic fracture propagation problem., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

The effects of small-scale convection in the shallow lithosphere of the North Atlantic

  • Likerman, Jeremías
  • Zlotnik, Sergio|||0000-0001-9674-8950
  • Li, Chun-Feng
Curie point depth can be used as a proxy for plate temperatures. Data from the North Atlantic (10°–50°N) are used here to determine if the observed oscillations and patterns in Curie depths could be a subproduct of small-scale thermal instabilities arising at the bottom of the lithospheric plates. Our numerical models suggest that small-scale convection (SSC) cells could produce thermal perturbations at isotherms as low as the Curie point. These results are compatible with North Atlantic observations in terms of wavelengths (150–300 km), amplitudes (~4 km) and orientations of the instabilities. Observed Curie-point depth oscillations before the onset (70 to 90 Myr) of SSC could also be linked to other different processes. We suggest that, in the case of the North Atlantic lithosphere, the spreading rate variation and the melt and upwelling could be intricately linked and cause a different pattern of SSC., JL acknowledges the funds project MATHROCKS funded by European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement Nº 777778 and the Agencia Nacional de Promoci´on Cient´ıfica y Tecnol´ogica (PICT 2013-1309 and 2015-1229). SZ acknowledge the funds by Generalitat de Catalunya (grant number 1278 SGR 2017-2019) and Ministerio de Econom´ıa y Empresa and Ministerio de Ciencia, Innovaci´on y Universidades (grant number DPI2017-85139-C2-2-R), and the support of the National Natural Science Foundation of China (Grant Nos. 41776057,41761134051 and 91858213), Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Error estimation and adaptivity for PGD based on complementary solutions applied to a simple 1D problem

  • Reis, Jonatha
  • Almeida, José Paulo Moitinho de
  • Díez, Pedro|||0000-0001-6464-6407
  • Zlotnik, Sergio|||0000-0001-9674-8950
The final authenticated version is available online at https://doi.org/10.1186/s40323-020-00180-3, Reduced order methods are powerful tools for the design and analysis of sophisticated systems, reducing computational costs and speeding up the development process. Among these reduced order methods, the Proper Generalized Decomposition is a well-established one, commonly used to deal with multi-dimensional problems that often suffer from the curse of dimensionality. Although the PGD method has been around for some time now, it still lacks mechanisms to assess the quality of the solutions obtained. This paper explores the dual error analysis in the scope of the PGD, using complementary solutions to compute error bounds and drive an adaptivity process, applied to a simple 1D problem. The energy of the error obtained from the dual analysis is used to determine the quality of the PGD approximations. We define a new adaptivity indicator based on the energy of the error and use it to drive parametric h- and p- adaptivity processes. The results are positive, with the indicator accurately capturing the parameter that will lead to lowest errors., Pedro Díez and Sergio Zlotink are grateful for the financial support provided by the Spanish Ministry of Economy and Competitiveness (Grant agreement No. DPI2017-85139-C2-2-R), the Generalitat de Catalunya (Grant agreement No. 2017-SGR-1278), and the project H2020-RISE MATH-ROCKS GA no 777778., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Adaptive surrogates of crashworthiness models for multi-purpose engineering analyses accounting for uncertainty

  • Rocas Alonso, Marc
  • García González, Alberto|||0000-0003-2841-016X
  • Larráyoz Izcara, Xabier
  • Díez, Pedro|||0000-0001-6464-6407
© 2022 Elsevier. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Uncertainty Quantification (UQ) is a booming discipline for complex computational models based on the analysis of robustness, reliability and credibility. UQ analysis for nonlinear crash models with high dimensional outputs presents important challenges. In crashworthiness, nonlinear structural behaviours with multiple hidden modes require expensive models (18 h for a single run). Surrogate models (metamodels) allow substituting the full order model, introducing a response surface for a reduced training set of numerical experiments. Moreover, uncertain input and large number of degrees of freedom result in high dimensional problems, which derives to a bottle neck that blocks the computational efficiency of the metamodels. Kernel Principal Component Analysis (kPCA) is a multidimensionality reduction technique for non-linear problems, with the advantage of capturing the most relevant information from the response and improving the efficiency of the metamodel. Aiming to compute the minimum number of samples with the full order model. The proposed methodology is tested with a practical industrial problem that arises from the automotive industry., This work is partially funded by Generalitat de Catalunya (Grant Number 1278 SGR 2017-2019 and Pla de Doctorats Industrials 2017 DI 058) and Ministerio de Economía y Empresa and Ministerio de Ciencia, Innovación y Universidades (Grant Number DPI2017-85139-C2-2-R)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A second-order face-centred finite volume method on general meshes with automatic mesh adaptation

  • Giacomini, Matteo|||0000-0001-6094-5944
  • Sevilla Cárdenas, Rubén|||0000-0002-0061-6214
This is the peer reviewed version of the following article: Giacomini, M.; Sevilla, R. A second-order face-centred finite volume method on general meshes with automatic mesh adaptation. "International journal for numerical methods in engineering", 1 Gener 2020, which has been published in final form at https://onlinelibrary.wiley.com/doi/full/10.1002/nme.6428. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving, A second-order face-centred finite volume strategy on general meshes is pro-posed. The method uses a mixed formulation in which a constant approximationof the unknown is computed on the faces of the mesh. Such information is thenused to solve a set of problems, independent cell-by-cell, to retrieve the local val-ues of the solution and its gradient. The main novelty of this approach is theintroduction of a new basis function, utilised for the linear approximation ofthe primal variable in each cell. Contrary to the commonly used nodal basis,the proposed basis is suitable for computations on general meshes, includingmeshes with different cell types. The resulting approach provides second-orderaccuracy for the solution and first-order for its gradient, without the need ofreconstruction procedures, is robust in the incompressible limit and insensitiveto cell distortion and stretching. The second-order accuracy of the solution isexploited to devise an automatic mesh adaptivity strategy. An efficient error indi-cator is obtained from the computation of one extra local problem, independentcell-by-cell, and is used to drive mesh adaptivity. Numerical examples illus-trating the approximation properties of the method and of the mesh adaptivityprocedure are presented. The potential of the proposed method with automaticmesh adaptation is demonstrated in the context of microfluidics., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Fast stokes flow simulations for geophysical-geodynamic inverse problems and sensitivity analyses based on reduced order modeling

  • Ortega Gelabert, Olga|||0000-0003-1046-4020
  • Zlotnik, Sergio|||0000-0001-9674-8950
  • Afonso, Juan Carlos
  • Díez, Pedro|||0000-0001-6464-6407
Markov chain Monte Carlo (MCMC) methods have become standard in Bayesian inference and multi-observable inversions in almost every discipline of the Earth sciences. In the case of geodynamic and/or coupled geophysical-geodynamic inverse problems, however, the computational cost associated with the solution of large-scale 3-D Stokes forward problems has rendered probabilistic formulations impractical. Here we present a novel and extremely efficient method to produce ultrafast solutions of the 3-D Stokes problem for MCMC simulations. Our approach combines the individual benefits of Reduced Basis techniques, goal-oriented error formulations, and MCMC algorithms to produce an accurate and computationally efficient surrogate for the forward problem. Importantly, the surrogate adapts itself during the MCMC simulation according to the history of the chain and the goals of the inversion. This maximizes the efficiency of the forward problem and removes the need for preinversion off-line computations to build a surrogate. We demonstrate the benefits and limitations of the method with several numerical examples and show that in all cases the computational cost is of the order of <1% compared to a traditional MCMC approach. The method is general enough to be applied to a range of problems, including uncertainty quantification/propagation, adjoint-based geodynamic inversions, sensitivity analyses in mantle convection problems, and in the creating surrogate models for complex forward problems (e.g., heat transfer, seismic tomography, and magnetotellurics)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Numerical estimation of the bearing capacity of resistance spot welds in martensitic boron steels using a J-integral fracture criterion

  • Dorribo Dorribo, Daniel
  • Greve, Lars
  • Díez, Pedro|||0000-0001-6464-6407
  • Arias Vicente, Irene|||0000-0002-6761-3499
  • Larráyoz Izcara, Xabier
Predicting the bearing capacity of resistance spot welds (RSW) during vehicle crash tests has become a crucial task for the automotive industry, since the recent introduction of advanced high strength steels (AHSS) such as martensitic boron steels (e.g. 22MnB5). The spot weld joints of these steels exhibit relatively low bearing strengths, compared to those of more ductile high strength steels. Currently, the bearing capacity of spot weld joints is characterized through extensive experimental campaigns. In this article, a model for quantification of the bearing capacity of RSW using a finite-element J-integral fracture criterion is presented. The model takes into account geometric and mechanical features of the spot weld, namely the weld diameter and the mechanical properties distribution resulting from the welding process. An experimental loading test campaign is carried out for calibration and validation purposes, considering multiple sheet thickness combinations, loading angles and weld sizes. Experimental observations of the failed spot welds and preliminary simulations show that failure is caused mostly by stress concentration around the sharp weld notch. Consequently, the J-integral obtained from detailed finite element simulations is used to asses the stress/strain concentration along the first crack advance direction predicted by the acoustic tensor. The computed J-integral values are compared to the material toughness to obtain the joint’s maximum force. The resulting simulated and experimental bearing capacities show a good agreement for all tested configurations., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Proper generalized decomposition solutions for composite laminates parametrized with fibre orientations

  • El-ghamrawy, Karim Mohamed Shaker Ibrahim
  • Zlotnik, Sergio|||0000-0001-9674-8950
  • Auricchio, Ferdinando
  • Díez, Pedro|||0000-0001-6464-6407
The version of record is available online at: http://dx.doi.org/10.1007/s00466-022-02218-2, Composite materials are gaining popularity as an alternative to classical materials in many different applications. Moreover, their design is even more flexible due to the potential of additive manufacturing. Thus, one can produce a tailored composite laminate with the optimal values of some design parameters providing the desired mechanical performance. In this context, having a parametric numerical model for the mechanical response of the composite laminate is essential to compute the optimal parameters. In the present paper, the design parameters under consideration are the angles describing the orientation of the reinforcement fibers in different layers or patches of the composite laminates. We obtain a generalized solution using Proper Generalized Decomposition (PGD) which is adopted to provide solutions with explicit parametric dependence. The Tsai-Wu failure criterion is used to estimate first ply failure. In this context, Tsai-Wu criterion is used as the objective function for the optimization of the fibre orientations in the laminate. The PGD solution provides also sensitivities for a gradient-based optimization algorithm. The potentiality and efficiency of the presented approach is demonstrated through some numerical tests., Karim El-Ghamrawy was supported by the European Education, Audiovisual and Culture Executive Agency (EACEA) under the Erasmus Mundus Joint Doctorate “Simulation in Engineering and Entrepreneurship Development (SEED)", FPA 2013-0043. Pedro Díez and Sergio Zlotnik are grateful for the financial support provided by the Spanish Ministry of Economy and Competitiveness (Grant agreement No. DPI2017-85139-C2-2-R) and by the Generalitat de Catalunya (Grant agreement No. 2017-SGR-1278, and the project H2020-RISE MATH-ROCKS GA n∘777778. This work was also partially supported by the Italian Minister of University and Research through the project “A BRIDGE TO THE FUTURE: Computational methods, innovative applications, experimental validations of new materials and technologies” (No. 2017L7X3CS) within the PRIN 2017 program., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Model order reduction of nonlinear thermo-hydro-mechanical systems by means of elastic and plastic domain sub-structuring

  • Larion, Ygee
  • Massart, Thierry J.
  • Díez, Pedro|||0000-0001-6464-6407
  • Chen, Guangjing
  • Seetharam, Suresh
  • Zlotnik, Sergio|||0000-0001-9674-8950
© 2024 Elsevier. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, A model order reduction approach combining reduced basis (RB) projection and sub-structuring by domain decomposition is developed to tackle nonlinear elasto-plasticity in parametrized coupled thermo-hydro-mechanical (THM) systems. The region-specific occurrence of plasticity in the THM process is exploited in domain decomposition to facilitate the simplified construction of localized reduced subspaces in order to perform projection on a multi-domain basis. Traditional RB projection is leveraged in the elastic zone while the computationally expensive nonlinear iterative procedure is confined in the zone where plasticity is assumed to be restricted. The applicability of the approach to parametric problems is investigated through inverse identification of material parameters involving a nonlinear THM model system for nuclear waste repository applications. The model reduction strategy is observed to significantly reduce the computational effort involved with up to 12 times faster simulation compared to finite element (FE)-driven inverse identification procedure., We acknowledge the funding support from the European Commission Education, Audiovisual and Culture Executive Agency (EACEA) under Erasmus Mundus Joint Doctorate Simulation in Engineering and Entrepreneurship Development (SEED), FPA 2013- 0043 and SCK CEN for funding the 4th year PhD study of the first author. S. Zlotnik and P. Díez would like to thank the funding from the Generalitat de Catalunya, Spain 2017-SGR-1278, the project DPI2017-85139-C2-2-R funded by the Spanish Ministry, Spain and the project H2020-RISE MATHROCKS GA n◦ 777778., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Nonintrusive reduced order model for parametric solutions of inertia relief problems

  • Cavaliere, Fabiola|||0000-0002-4148-7594
  • Zlotnik, Sergio|||0000-0001-9674-8950
  • Sevilla Cárdenas, Rubén|||0000-0002-0061-6214
  • Larráyoz Izcara, Xabier
  • Díez, Pedro|||0000-0001-6464-6407
This is the peer reviewed version of the following article: Cavaliere, F. [et al.]. Nonintrusive reduced order model for parametric solutions of inertia relief problems. "International journal for numerical methods in engineering", 30 Agost 2021, vol. 122, núm. 16, p. 4270-4291., which has been published in final form at DOI:10.1002/nme.6702. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving., The Inertia Relief (IR) technique is widely used by industry and produces equilibrated loads allowing to analyze unconstrained systems without resorting to the more expensive full dynamic analysis. The main goal of this work is to develop a computational framework for the solution of unconstrained parametric structural problems with IR and the Proper Generalized Decomposition (PGD) method. First, the IR method is formulated in a parametric setting for both material and geometric parameters. A reduced order model using the encapsulated PGD suite is then developed to solve the parametric IR problem, circumventing the so-called curse of dimensionality. With just one offline computation, the proposed PGD-IR scheme provides a computational vademecum that contains all the possible solutions for a predefined range of the parameters. The proposed approach is nonintrusive and it is therefore possible to be integrated with commercial finite element (FE) packages. The applicability and potential of the developed technique is shown using a three-dimensional test case and a more complex industrial test case. The first example is used to highlight the numerical properties of the scheme, whereas the second example demonstrates the potential in a more complex setting and it shows the possibility to integrate the proposed framework within a commercial FE package. In addition, the last example shows the possibility to use the generalized solution in a multi-objective optimization setting., This project is part of the Marie Sk lodowska-Curie ITN-EJD ProTechTion funded by the European Union Horizon 2020 research and innovation program with grant number 764636. The work of Fabiola Cavaliere, Sergio Zlotnik and Pedro D´ıez is partially supported by the Spanish Ministry of Economy and Competitiveness, Spain (Grant number: DPI2017-85139- C2-2-R) and by the Generalitat de Catalunya, Spain (Grant number: 2017-SGR-1278). Ruben Sevilla also acknowledges the support of the Engineering and Physical Sciences Research Council (Grant number: EP/P033997/1)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Encapsulated PGD algebraic toolbox operating with high-dimensional data

  • Díez, Pedro|||0000-0001-6464-6407
  • Zlotnik, Sergio|||0000-0001-9674-8950
  • García González, Alberto|||0000-0003-2841-016X
  • Huerta, Antonio|||0000-0003-4198-3798
This is a post-peer-review, pre-copyedit version of an article published in Archives of computational methods in engineering. The final authenticated version is available online at: http://dx.doi.org/10.1007/s11831-019-09378-0, In its original conception, proper generalized decomposition (PGD) provides explicit parametric solutions, denoted as computational vademecums or digital abacuses, to parametric boundary value problems. The PGD approach is extended here to devise a set of algebraic tools enabling to operate with multidimensional tensor data. These tools are designed to store, compress and perform basic operations (in particular divisions) with tensors in separable format. These tools are directly producing the computational vademecums for the resulting high-dimensional tensor data. Thus, the general methodology enables performing nontrivial operations (storage, compression, division, solving linear systems of equations...) for multidimensional tensor data. The idea is based on the principle of the PGD separation, that produces a separable least squares approximation of any multidimensional function. The PGD compression is a particular case, extensively used in practice to compact the separable solution without loss of accuracy. Here, this concept is applied to algebraic tensor structures that are also seen as functions in multidimensional Cartesian domains. Moreover, a straightforward extension of this concept is devised to operate with multidimensional objects stored in the separable format. That allows creating a toolbox of PGD arithmetic operators that is publicly released at https://git.lacan.upc.edu/zlotnik/algebraicPGDtools. Numerical tests demonstrate the performance and efficiency of the toolbox, both for tensor data handling and operation and also in applications pertaining to the discretized version of boundary value problems., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Hybrid coupling of CG and HDG discretizations based on Nitsche’s method

  • Spina, Andrea la
  • Giacomini, Matteo|||0000-0001-6094-5944
  • Huerta, Antonio|||0000-0003-4198-3798
This is a post-peer-review, pre-copyedit version of an article published in Computational mechanics. The final authenticated version is available online at: http://dx.doi.org/10.1007/s00466-019-01770-8, A strategy to couple continuous Galerkin (CG) and hybridizable discontinuous Galerkin (HDG) discretizations based only on the HDG hybrid variable is presented for linear thermal and elastic problems. The hybrid CG-HDG coupling exploits the definition of the numerical flux and the trace of the solution on the mesh faces to impose the transmission conditions between the CG and HDG subdomains. The con- tinuity of the solution is imposed in the CG problem via Nitsche’s method, whereas the equilibrium of the flux at the interface is naturally enforced as a Neumann con- dition in the HDG global problem. The proposed strategy does not affect the core structure of CG and HDG discretizations. In fact, the resulting formulation leads to a minimally-intrusive coupling, suitable to be integrated in existing CG and HDG libraries. Numerical experiments in two and three dimensions show optimal global convergence of the stress and superconvergence of the displacement field, locking-free approximation, as well as the potential to treat structural problems of engineering interest featuring multiple materials with compressible and nearly incompressible behaviors., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Nonintrusive stochastic finite elements for crashworthiness with VPS/Pamcrash

  • Rocas, Marc
  • García González, Alberto|||0000-0003-2841-016X
  • Larráyoz Izcara, Xabier
  • Díez, Pedro|||0000-0001-6464-6407
This is a post-peer-review, pre-copyedit version of an article published in Archives of computational methods in engineering. The final authenticated version is available online at: http://dx.doi.org/10.1007/s11831-019-09397-x, Crashworthiness analysis remains an important concern for the design of safety structures. In this context, uncertainties play an essential role in the response of a crash problem with non linear behavior. With this statement at hand, in this work it is presented a review of uncertainty quantification (UQ) techniques, with intrusive and non-intrusive approaches in stochastic finite element methods for crashworthiness. The well-known deterministic finite element solver VPS/Pamcrash is used to illustrate the currently available methods, developing a comparative analysis of these techniques in crashworthiness UQ. Finally, relevant non-intrusive methods are applied to analyze the behavior of a specific quantity of interest in a dynamic crash model., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Building a certified reduced basis for coupled thermo-hydro-mechanical systems with goal-oriented error estimation

  • Larion, Ygee
  • Zlotnik, Sergio|||0000-0001-9674-8950
  • Massart, Thierry J.
  • Díez, Pedro|||0000-0001-6464-6407
This is a post-peer-review, pre-copyedit version of an article published in Computational mechanics. The final authenticated version is available online at: http://dx.doi.org/10.1007/s00466-020-01865-7, A goal-oriented a-posteriori error estimator is developed for transient coupled thermo-hydro-mechanical (THM) parametric problems solved with a reduced basis approximation. The estimator assesses the error in some specific Quantity of Interest (QoI). The goal-oriented error estimate is derived based on explicitly-computed weak residual of the primal problem and implicitly-computed adjoint solution associated with the QoI. The time-dependence of the coupled THM system poses an additional complexity as the auxiliary adjoint problem evolves backwards in time. The error estimator guides a greedy adaptive procedure that constructs progressively an optimal reduced basis by smartly selecting snapshot points over a given parametric training sample. The reduced basis obtained is used to drastically reduce the coupled system spatial degrees of freedom by several orders of magnitude. The computational gain obtained from the developed methodology is demonstrated through applications in 2D and 3D parametrized problems simulating the evolution of coupled THM processes in rock masses., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Analog and numerical experiments of double subduction systems with opposite polarity in adjacent segments

  • Peral, Mireia
  • Ruh, Jonas
  • Zlotnik, Sergio|||0000-0001-9674-8950
  • Funiciello, Francesca
  • Fernandez Ortiga, Manel
  • Vergés Masip, Jaume
  • Gerya, Taras
In this work we study the dynamics of double subduction systems with opposite polarity in adjacent segments. A combined approach of numerical and analog experiments allows us to compare results and exploit the strengths of both methodologies. High-resolution numerical experiments complement laboratory results by providing quantities difficult to measure in the laboratory such as stress state, flow patterns, and energy dissipation. Results show strong asymmetries in the mantle flow that produce in turn asymmetries in the trench and in the downgoing slab deformation. The mantle flow pattern varies with time; the toroidal cells between the plates evolve until merging into one unique cell when the trenches align. In that moment the maximum upward flow is observed close to the trenches. The interaction between the mantle flow produced by each subducting plate makes the rollback processes slower than in a single subduction case. This is consistent with the observed energy dissipation rate that is smaller in the double subduction system than in two single subductions. Moreover, we provide a detailed analysis on the setup and boundary conditions required to numerically reproduce the analog experiments. Boundary conditions at the bottom of the domain are crucial to reproduce their analog counterparts. Numerical results are compared to natural examples of multi-slab subduction systems in terms of upper mantle seismic anisotropy, relative trench retreat velocities, and composition of subduction-related magmatism., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

HDGlab: an open-source implementation of the hybridisable discontinuous Galerkin method in MATLAB

  • Giacomini, Matteo|||0000-0001-6094-5944
  • Sevilla Cárdenas, Rubén|||0000-0002-0061-6214
  • Huerta, Antonio|||0000-0003-4198-3798
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/., This paper presents HDGlab, an open source MATLAB implementation of the hybridisable discontinuous Galerkin (HDG) method. The main goal is to provide a detailed description of both the HDG method for elliptic problems and its implementation available in HDGlab. Ultimately, this is expected to make this relatively new advanced discretisation method more accessible to the computational engineering community. HDGlab presents some features not available in other implementations of the HDG method that can be found in the free domain. First, it implements high-order polynomial shape functions up to degree nine, with both equally-spaced and Fekete nodal distributions. Second, it supports curved isoparametric simplicial elements in two and three dimensions. Third, it supports non-uniform degree polynomial approximations and it provides a flexible structure to devise degree adaptivity strategies. Finally, an interface with the open-source high-order mesh generator Gmsh is provided to facilitate its application to practical engineering problems., This work was partially supported by the Spanish Ministry of Economy and Competitiveness (Grant Number: DPI2017-85139-C2-2-R). M.G. and A.H. are also grateful for the support provided by the Spanish Ministry of Economy and Competitiveness through the Severo Ochoa programme for centres of excellence in RTD (Grant Number: CEX2018-000797-S) and the Generalitat de Catalunya (Grant Number: 2017-SGR-1278). R.S. also acknowledges the support of the Engineering and Physical Sciences Research Council (Grant Number: EP/T009071/1)., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A superconvergent HDG method for stokes flow with strongly enforced symmetry of the stress tensor

  • Giacomini, Matteo
  • Karkoulias, Alexandros
  • Sevilla Cárdenas, Rubén
  • Huerta, Antonio
The final publication is available at Springer via http://dx.doi.org/10.1007/s10915-018-0855-y, This work proposes a superconvergent hybridizable discontinuous Galerkin (HDG) method for the approximation of the Cauchy formulation of the Stokes equation using same degree of polynomials for the primal and mixed variables. The novel formulation relies on the well-known Voigt notation to strongly enforce the symmetry of the stress tensor. The proposed strategy introduces several advantages with respect to the existing HDG formulations. First, it remedies the suboptimal behavior experienced by the classical HDG method for formulations involving the symmetric part of the gradient of the primal variable. The optimal convergence of the mixed variable is retrieved and an element-by-element postprocess procedure leads to a superconvergent velocity field, even for low-order approximations. Second, no additional enrichment of the discrete spaces is required and a gain in computational efficiency follows from reducing the quantity of stored information and the size of the local problems. Eventually, the novel formulation naturally imposes physical tractions on the Neumann boundary. Numerical validation of the optimality of the method and its superconvergent properties is performed in 2D and 3D using meshes of different element types., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A locking-free face-centred finite volume (FCFV) method for linear elastostatics

  • Sevilla Cárdenas, Rubén
  • Giacomini, Matteo
  • Huerta, Antonio
A face-centred finite volume (FCFV) method is proposed for linear elastostatic problems. The FCFV is a mixed hybrid formulation, featuring a system of first-order equations, that defines the unknowns on the faces (edges in two dimensions) of the mesh cells. The symmetry of the stress tensor is strongly enforced using the well-known Voigt notation and the displacement and stress fields inside each cell are obtained by means of explicit formulas. The resulting FCFV method is robust and locking-free in the nearly incompressible limit. Numerical experiments in two and three dimensions show optimal convergence of the displacement and the stress fields without any reconstruction. Moreover, the accuracy of the FCFV method is not sensitive to mesh distortion and stretching. Classical benchmark tests including Kirch’s plate and Cook’s membrane problems in two dimensions as well as three dimensional problems involving shear phenomenons, pressurised thin shells and complex geometries are presented to show the capability and potential of the proposed methodology., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

The effects of small-scale convection in the shallow lithosphere of the North Atlantic

  • Likerman, Jeremías
  • Zlotnik, Sergio
  • Li, Chun-Feng
Curie point depth can be used as a proxy for plate temperatures. Data from the North Atlantic (10°–50°N) are used here to determine if the observed oscillations and patterns in Curie depths could be a subproduct of small-scale thermal instabilities arising at the bottom of the lithospheric plates. Our numerical models suggest that small-scale convection (SSC) cells could produce thermal perturbations at isotherms as low as the Curie point. These results are compatible with North Atlantic observations in terms of wavelengths (150–300 km), amplitudes (~4 km) and orientations of the instabilities. Observed Curie-point depth oscillations before the onset (70 to 90 Myr) of SSC could also be linked to other different processes. We suggest that, in the case of the North Atlantic lithosphere, the spreading rate variation and the melt and upwelling could be intricately linked and cause a different pattern of SSC., JL acknowledges the funds project MATHROCKS funded by European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement Nº 777778 and the Agencia Nacional de Promoci´on Cient´ıfica y Tecnol´ogica (PICT 2013-1309 and 2015-1229). SZ acknowledge the funds by Generalitat de Catalunya (grant number 1278 SGR 2017-2019) and Ministerio de Econom´ıa y Empresa and Ministerio de Ciencia, Innovaci´on y Universidades (grant number DPI2017-85139-C2-2-R), and the support of the National Natural Science Foundation of China (Grant Nos. 41776057,41761134051 and 91858213), Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Towards real time assessment of earthfill dams via Model Order Reduction

  • Nasika, Christina
  • Díez, Pedro
  • Gerard, Pierre
  • Massart, Thierry J.
  • Zlotnik, Sergio
© 2022 Elsevier. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, The use of Internet of Things (IoT) technologies is becoming a preferred solution for the assessment of tailings dams’ safety. Real-time sensor monitoring proves to be a key tool for reducing the risk related to these ever-evolving earth-fill structures, that exhibit a high rate of sudden and extremely hazardous failures. In order to optimally exploit real-time embankment monitoring, one major hindrance has to be overcome: the creation of a supporting numerical model for stability analysis, with rapid-enough response to perform data assimilation in real time. A model should therefore be built, such that its response can be obtained faster than the physical evolution of the phenomenon to be analyzed. In this work, Reduced Order Modeling (ROM) is used to boost computational efficiency in solving the coupled hydromechanical system of equations governing the problem. POD-based reduction has been studied in order to treat the problem of groundwater flow, coupled to the geomechanical problem. The Reduced Basis method is applied to the coupled hydro-mechanical equations that govern the flow of groundwater, that are made non-linear as a result of considering an unsaturated soil. The resulting model’s performance is assessed by solving a 2D and a 3D problem relevant to tailings dams’ safety. The ROM technique achieves a speedup of 3 to 15 times with respect to the full-order model (FOM) while maintaining high levels of accuracy., This work has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie SklodowskaCurie grant agreement No 764636, for the research project ProTechTion. We thank Professor Sebatian Olivella (Escola de Camins, Universitat Politècnica de Catalunya) for his much appreciated assistance. Pedro Díez and Sergio Zlotink are grateful for the financial support provided by the Spanish Ministry of Economy and Competitiveness (Grant agreement No. DPI2017-85139-C2-2-R), by the Generalitat de Catalunya (Grant agreement No. 2017-SGR-1278), and by project H2020-RISE MATH-ROCKS GA no 777778., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

HDGlab: an open-source implementation of the hybridisable discontinuous Galerkin method in MATLAB

  • Giacomini, Matteo
  • Sevilla Cárdenas, Rubén
  • Huerta, Antonio
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/., This paper presents HDGlab, an open source MATLAB implementation of the hybridisable discontinuous Galerkin (HDG) method. The main goal is to provide a detailed description of both the HDG method for elliptic problems and its implementation available in HDGlab. Ultimately, this is expected to make this relatively new advanced discretisation method more accessible to the computational engineering community. HDGlab presents some features not available in other implementations of the HDG method that can be found in the free domain. First, it implements high-order polynomial shape functions up to degree nine, with both equally-spaced and Fekete nodal distributions. Second, it supports curved isoparametric simplicial elements in two and three dimensions. Third, it supports non-uniform degree polynomial approximations and it provides a flexible structure to devise degree adaptivity strategies. Finally, an interface with the open-source high-order mesh generator Gmsh is provided to facilitate its application to practical engineering problems., This work was partially supported by the Spanish Ministry of Economy and Competitiveness (Grant Number: DPI2017-85139-C2-2-R). M.G. and A.H. are also grateful for the support provided by the Spanish Ministry of Economy and Competitiveness through the Severo Ochoa programme for centres of excellence in RTD (Grant Number: CEX2018-000797-S) and the Generalitat de Catalunya (Grant Number: 2017-SGR-1278). R.S. also acknowledges the support of the Engineering and Physical Sciences Research Council (Grant Number: EP/T009071/1)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Nonintrusive reduced order model for parametric solutions of inertia relief problems

  • Cavaliere, Fabiola
  • Zlotnik, Sergio
  • Sevilla Cárdenas, Rubén
  • Larráyoz Izcara, Xabier
  • Díez, Pedro
This is the peer reviewed version of the following article: Cavaliere, F. [et al.]. Nonintrusive reduced order model for parametric solutions of inertia relief problems. "International journal for numerical methods in engineering", 30 Agost 2021, vol. 122, núm. 16, p. 4270-4291., which has been published in final form at DOI:10.1002/nme.6702. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving., The Inertia Relief (IR) technique is widely used by industry and produces equilibrated loads allowing to analyze unconstrained systems without resorting to the more expensive full dynamic analysis. The main goal of this work is to develop a computational framework for the solution of unconstrained parametric structural problems with IR and the Proper Generalized Decomposition (PGD) method. First, the IR method is formulated in a parametric setting for both material and geometric parameters. A reduced order model using the encapsulated PGD suite is then developed to solve the parametric IR problem, circumventing the so-called curse of dimensionality. With just one offline computation, the proposed PGD-IR scheme provides a computational vademecum that contains all the possible solutions for a predefined range of the parameters. The proposed approach is nonintrusive and it is therefore possible to be integrated with commercial finite element (FE) packages. The applicability and potential of the developed technique is shown using a three-dimensional test case and a more complex industrial test case. The first example is used to highlight the numerical properties of the scheme, whereas the second example demonstrates the potential in a more complex setting and it shows the possibility to integrate the proposed framework within a commercial FE package. In addition, the last example shows the possibility to use the generalized solution in a multi-objective optimization setting., This project is part of the Marie Sk lodowska-Curie ITN-EJD ProTechTion funded by the European Union Horizon 2020 research and innovation program with grant number 764636. The work of Fabiola Cavaliere, Sergio Zlotnik and Pedro D´ıez is partially supported by the Spanish Ministry of Economy and Competitiveness, Spain (Grant number: DPI2017-85139- C2-2-R) and by the Generalitat de Catalunya, Spain (Grant number: 2017-SGR-1278). Ruben Sevilla also acknowledges the support of the Engineering and Physical Sciences Research Council (Grant number: EP/P033997/1)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Separated response surfaces for flows in parametrised domains: comparison of a priori and a posteriori PGD algorithms

  • Giacomini, Matteo
  • Borchini, Luca
  • Sevilla Cárdenas, Rubén
  • Huerta, Antonio
© 2021 Elsevier. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Reduced order models (ROM) are commonly employed to solve parametric problems and to devise inexpensive response surfaces to evaluate quantities of interest in real-time. There are many families of ROMs in the literature and choosing among them is not always a trivial task. This work presents a comparison of the performance of a priori and a posteriori proper generalised decomposition (PGD) algorithms for an incompressible Stokes flow problem in a geometrically parametrised domain. This problem is particularly challenging as the geometric parameters affect both the solution manifold and the computational spatial domain. The difficulty is further increased because multiple geometric parameters are considered and extended ranges of values are analysed for the parameters and this leads to significant variations in the flow features. Using a set of numerical experiments involving geometrically parametrised microswimmers, the two PGD algorithms are extensively compared in terms of their accuracy and their computational cost, expressed as a function of the number of full-order solves required., This work was partially supported by the European Union’s Horizon 2020 research and innovation programme under the Marie Sk lodowska-Curie Actions (Grant number: 675919) that financed the Ph.D. fellowship of L.B. and by the Spanish Ministry of Economy and Competitiveness (Grant number: DPI2017-85139-C2-2-R). M.G. and A.H. are also grateful for the support provided by the Spanish Ministry of Economy and Competitiveness through the Severo Ochoa programme for centres of excellence in RTD (Grant number: CEX2018-000797-S) and the Generalitat de Catalunya (Grant number: 2017-SGR-1278). R.S. also acknowledges the support of the Engineering and Physical Sciences Research Council (Grant number: EP/P033997/1)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A Proper Generalized Decomposition (PGD) approach to crack propagation in brittle materials: with application to random field material properties

  • Garikapati, Hasini
  • Zlotnik, Sergio
  • Díez, Pedro
  • Verhoosel, Clemens V.
  • van Brummelen, Harald
The final publication is available at Springer via http://dx.doi.org/10.1007/s00466-019-01778-0, Understanding the failure of brittle heterogeneous materials is essential in many applications. Heterogeneities in materialproperties are frequently modeled through random fields, which typically induces the need to solve finite element problemsfor a large number of realizations. In this context, we make use of reduced order modeling to solve these problems at anaffordable computational cost. This paper proposes a reduced order modeling framework to predict crack propagation in brittlematerials with random heterogeneities. The framework is based on a combination of the Proper Generalized Decomposition(PGD) method with Griffith’s global energy criterion. The PGD framework provides an explicit parametric solution forthe physical response of the system. We illustrate that a non-intrusive sampling-based technique can be applied as a post-processing operation on the explicit solution provided by PGD. We first validate the framework using a global energy approachon a deterministic two-dimensional linear elastic fracture mechanics benchmark. Subsequently, we apply the reduced ordermodeling approach to a stochastic fracture propagation problem., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Analog and numerical experiments of double subduction systems with opposite polarity in adjacent segments

  • Peral, Mireia
  • Ruh, Jonas
  • Zlotnik, Sergio
  • Funiciello, Francesca
  • Fernandez Ortiga, Manel
  • Vergés Masip, Jaume
  • Gerya, Taras
In this work we study the dynamics of double subduction systems with opposite polarity in adjacent segments. A combined approach of numerical and analog experiments allows us to compare results and exploit the strengths of both methodologies. High-resolution numerical experiments complement laboratory results by providing quantities difficult to measure in the laboratory such as stress state, flow patterns, and energy dissipation. Results show strong asymmetries in the mantle flow that produce in turn asymmetries in the trench and in the downgoing slab deformation. The mantle flow pattern varies with time; the toroidal cells between the plates evolve until merging into one unique cell when the trenches align. In that moment the maximum upward flow is observed close to the trenches. The interaction between the mantle flow produced by each subducting plate makes the rollback processes slower than in a single subduction case. This is consistent with the observed energy dissipation rate that is smaller in the double subduction system than in two single subductions. Moreover, we provide a detailed analysis on the setup and boundary conditions required to numerically reproduce the analog experiments. Boundary conditions at the bottom of the domain are crucial to reproduce their analog counterparts. Numerical results are compared to natural examples of multi-slab subduction systems in terms of upper mantle seismic anisotropy, relative trench retreat velocities, and composition of subduction-related magmatism., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Model order reduction of nonlinear thermo-hydro-mechanical systems by means of elastic and plastic domain sub-structuring

  • Larion, Ygee
  • Massart, Thierry J.
  • Díez, Pedro
  • Chen, Guangjing
  • Seetharam, Suresh
  • Zlotnik, Sergio
© 2024 Elsevier. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, A model order reduction approach combining reduced basis (RB) projection and sub-structuring by domain decomposition is developed to tackle nonlinear elasto-plasticity in parametrized coupled thermo-hydro-mechanical (THM) systems. The region-specific occurrence of plasticity in the THM process is exploited in domain decomposition to facilitate the simplified construction of localized reduced subspaces in order to perform projection on a multi-domain basis. Traditional RB projection is leveraged in the elastic zone while the computationally expensive nonlinear iterative procedure is confined in the zone where plasticity is assumed to be restricted. The applicability of the approach to parametric problems is investigated through inverse identification of material parameters involving a nonlinear THM model system for nuclear waste repository applications. The model reduction strategy is observed to significantly reduce the computational effort involved with up to 12 times faster simulation compared to finite element (FE)-driven inverse identification procedure., We acknowledge the funding support from the European Commission Education, Audiovisual and Culture Executive Agency (EACEA) under Erasmus Mundus Joint Doctorate Simulation in Engineering and Entrepreneurship Development (SEED), FPA 2013- 0043 and SCK CEN for funding the 4th year PhD study of the first author. S. Zlotnik and P. Díez would like to thank the funding from the Generalitat de Catalunya, Spain 2017-SGR-1278, the project DPI2017-85139-C2-2-R funded by the Spanish Ministry, Spain and the project H2020-RISE MATHROCKS GA n◦ 777778., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Nonintrusive stochastic finite elements for crashworthiness with VPS/Pamcrash

  • Rocas, Marc
  • García González, Alberto
  • Larráyoz Izcara, Xabier
  • Díez, Pedro
This is a post-peer-review, pre-copyedit version of an article published in Archives of computational methods in engineering. The final authenticated version is available online at: http://dx.doi.org/10.1007/s11831-019-09397-x, Crashworthiness analysis remains an important concern for the design of safety structures. In this context, uncertainties play an essential role in the response of a crash problem with non linear behavior. With this statement at hand, in this work it is presented a review of uncertainty quantification (UQ) techniques, with intrusive and non-intrusive approaches in stochastic finite element methods for crashworthiness. The well-known deterministic finite element solver VPS/Pamcrash is used to illustrate the currently available methods, developing a comparative analysis of these techniques in crashworthiness UQ. Finally, relevant non-intrusive methods are applied to analyze the behavior of a specific quantity of interest in a dynamic crash model., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Encapsulated PGD algebraic toolbox operating with high-dimensional data

  • Díez, Pedro
  • Zlotnik, Sergio
  • García González, Alberto
  • Huerta, Antonio
This is a post-peer-review, pre-copyedit version of an article published in Archives of computational methods in engineering. The final authenticated version is available online at: http://dx.doi.org/10.1007/s11831-019-09378-0, In its original conception, proper generalized decomposition (PGD) provides explicit parametric solutions, denoted as computational vademecums or digital abacuses, to parametric boundary value problems. The PGD approach is extended here to devise a set of algebraic tools enabling to operate with multidimensional tensor data. These tools are designed to store, compress and perform basic operations (in particular divisions) with tensors in separable format. These tools are directly producing the computational vademecums for the resulting high-dimensional tensor data. Thus, the general methodology enables performing nontrivial operations (storage, compression, division, solving linear systems of equations...) for multidimensional tensor data. The idea is based on the principle of the PGD separation, that produces a separable least squares approximation of any multidimensional function. The PGD compression is a particular case, extensively used in practice to compact the separable solution without loss of accuracy. Here, this concept is applied to algebraic tensor structures that are also seen as functions in multidimensional Cartesian domains. Moreover, a straightforward extension of this concept is devised to operate with multidimensional objects stored in the separable format. That allows creating a toolbox of PGD arithmetic operators that is publicly released at https://git.lacan.upc.edu/zlotnik/algebraicPGDtools. Numerical tests demonstrate the performance and efficiency of the toolbox, both for tensor data handling and operation and also in applications pertaining to the discretized version of boundary value problems., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Fast solution of elliptic harbor agitation problems under frequency-direction input spectra by model order reduction and NURBS-enhanced FEM

  • Modesto Galende, David
  • Ye, Boyi
  • Zlotnik, Sergio
  • Huerta, Antonio
© 2020. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Many harbor applications are based on the solution of linear elliptic agitation problems for many spectral conditions. One of the main goals consists in computing the linear combination of numerous simulations of the harbor agitation problem, using monochromatic waves of different spectral components (i.e. frequency and incoming wave direction). In practice, the standard strategy selects the number of wave components according to a prescribed discretization of the 2D input spectra. The main issue relies on some quantities of interest that are very sensitive to the level of refinement of the spectra, such as the significant wave height at every mesh point or the identification of resonance modes induced by long wave scattering. In many cases, achieving enough quality in these quantities may impose numerous simulations and, consequently, non-practical computer costs. This can drastically limit the final accuracy of results. To overcome this situation, here a new strategy is proposed to efficiently solve a large number of harbor agitation problems derived from dense discretizations of the 2D input spectra. The strategy is based on the combination of two different numerical approaches. Firstly, each required monochromatic simulation is solved via high order NURBS (non-uniform rational B-splines) enhanced finite elements (NEFEM). More precisely, NEFEM captures the exact harbor geometry using large mesh elements that produce accurate solutions and significant savings on the system size, particularly in long wave cases. Secondly, a model order reduction technique is used to approximate the original elliptic harbor model by a so-called surrogate model. The main advantage is that, once the surrogate model is constructed, it can be rapidly evaluated to provide simulations for any value of the spectral components within a range of interest, and without the need of solving any new harbor agitation problem (as the standard strategy does). Thus, this enables the possibility of using any desired discretization of the 2D input spectra with no additional computer cost. The construction of the surrogate model is performed using the proper generalized decomposition method with a novel incremental computation along the frequency dimension. The proposed strategy is discussed, and its superior performance with respect to standard strategies is demonstrated, on two harbor agitation examples with several applications., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Nonintrusive uncertainty quantification for automotive crash problems with VPS/Pamcrash

  • Rocas Alonso, Marc
  • García González, Alberto
  • Zlotnik, Sergio
  • Larráyoz Izcara, Xabier
  • Díez, Pedro
© 2021 Elsevier. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Uncertainty Quantification (UQ) is a key discipline for computational modeling of complex systems, enhancing reliability of engineering simulations. In crashworthiness, having an accurate assessment of the behavior of the model uncertainty allows reducing the number of prototypes and associated costs. Carrying out UQ in this framework is especially challenging because it requires highly expensive simulations. In this context, surrogate models (metamodels) allow drastically reducing the computational cost of Monte Carlo process. Different techniques to describe the metamodel are considered, Ordinary Kriging, Polynomial Response Surfaces and a novel strategy (based on Proper Generalized Decomposition) denoted by Separated Response Surface (SRS). A large number of uncertain input parameters may jeopardize the efficiency of the metamodels. Thus, previous to define a metamodel, kernel Principal Component Analysis (kPCA) is found to be effective to simplify the model outcome description. A benchmark crash test is used to show the efficiency of combining metamodels with kPCA., This work is partially funded by Generalitat de Catalunya (Grant Number 1278 SGR 2017-2019 and Pla de Doctorats Industrials 2017 DI 058) and Ministerio de Econom´ıa y Empresa and Ministerio de Ciencia, Innovaci´on y Universidades (Grant Number DPI2017-85139-C2-2-R)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Nonintrusive proper generalised decomposition for parametrised incompressible flow problems in OpenFOAM

  • Tsiolakis, Vasileios
  • Giacomini, Matteo
  • Sevilla Cárdenas, Rubén
  • Othmer, Carsten
  • Huerta, Antonio
The computational cost of parametric studies currently represents the major limitation to the application of simulation-based engineering techniques in a daily industrial environment. This work presents the first nonintrusive implementation of the proper generalised decomposition (PGD) in OpenFOAM, for the approximation of parametrised laminar incompressible Navier–Stokes equations. The key feature of this approach is the seamless integration of a reduced order model (ROM) in the framework of an industrially validated computational fluid dynamics software. This is of special importance in an industrial environment because in the online phase of the PGD ROM the description of the flow for a specific set of parameters is obtained simply via interpolation of the generalised solution, without the need of any extra solution step. On the one hand, the spatial problems arising from the PGD separation of the unknowns are treated using the classical solution strategies of OpenFOAM, namely the semi-implicit method for pressure linked equations (SIMPLE) algorithm. On the other hand, the parametric iteration is solved via a collocation approach. The resulting ROM is applied to several benchmark tests of laminar incompressible Navier–Stokes flows, in two and three dimensions, with different parameters affecting the flow features. Eventually, the capability of the proposed strategy to treat industrial problems is verified by applying the methodology to a parametrised flow control in a realistic geometry of interest for the automotive industry., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Error estimation for proper generalized decomposition solutions: dual analysis and adaptivity for quantities of interest

  • Reis, Jonatha
  • Almeida, José Paulo Moitinho de
  • Díez, Pedro
  • Zlotnik, Sergio
This is the peer reviewed version of the following article: Reis, J. [et al.]. Error estimation for proper generalized decomposition solutions: dual analysis and adaptivity for quantities of interest. "International journal for numerical methods in engineering", 15 Febrer 2021, vol. 122, núm. 3, p. 752-776, which has been published in final form at https://onlinelibrary.wiley.com/doi/10.1002/nme.6559. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving., When designing a structure or engineering a component, it is crucial to use methods that provide fast and reliable solutions, so that a large number of design options can be assessed. In this context, the proper generalized decomposition (PGD) can be a powerful tool, as it provides solutions to parametric problems, without being affected by the “curse of dimensionality.” Assessing the accuracy of the solutions obtained with the PGD is still a relevant challenge, particularly when seeking quantities of interest with guaranteed bounds. In this work, we compute compatible and equilibrated PGD solutions and use them in a dual analysis to obtain quantities of interest and their bounds, which are guaranteed. We also use these complementary solutions to compute an error indicator, which is used to drive a mesh adaptivity process, oriented for a quantity of interest. The corresponding solutions have errors that are much lower than those obtained using a uniform refinement or an indicator based on the global error, as the proposed approach focuses on minimizing the error in the quantity of interest., Education, Audiovisual and Culture Executive Agency, FPA 2013‐0043; Generalitat de Catalunya, No. 2017‐SGR‐1278; H2020 Marie Skłodowska‐Curie Actions, MATH‐ROCKS GA no 777778.; Ministerio de Economía y Competitividad, No. DPI2017‐85139‐C2‐2‐R, Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Opposite subduction polarity in adjacent plate segments

  • Peral, Mireia
  • Kiraly, Agnes
  • Zlotnik, Sergio
  • Funiciello, Francesca
  • Fernandez Ortiga, Manel
  • Faccenna, Claudio
  • Vergés, Jaume
Active and fossil subduction systems consisting of two adjacent plates with opposite retreating directions occur in several areas on Earth, as the Mediterranean or Western Pacific. The goal of this work is to better understand the first-order plate dynamics of these systems using the results of experimental models. The laboratory model is composed of two separate plates made of silicon putty representing the lithosphere, on top of a tank filled with glucose syrup representing the mantle. The set of experiments is designed to test the influence of the width of plates and the initial separation between them on the resulting trench velocities, deformation of plates, and mantle flow. Results show that the mantle flow induced by both plates is asymmetric relative to the axis of each plate causing a progressive merging of the toroidal cells that prevents a steady state phase of the subduction process and generates a net outward drag perpendicular to the plates. Trench velocities increase when trenches approach each other and decrease when they separate after their intersection. The trench curvature of both plates increases linearly with time during the entire evolution of the process regardless their width and initial separation. The interaction between the return flows associated with each retreating plate, particularly in the interplate region, is stronger for near plate configurations and correlates with variations of rollback velocities. We propose that the inferred first-order dynamics of the presented analog models can provide relevant clues to understand natural complex subduction systems, Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Sampling-based stochastic analysis of the PKN model for hydraulic fracturing

  • Garikapati, Hasini
  • Verhoosel, Clemens V.
  • van Brummelen, Harald
  • Zlotnik, Sergio
  • Díez, Pedro
The final publication is available at Springer via http://dx.doi.org/10.1007/s10596-018-9784-y, Hydraulic fracturing processes are surrounded by uncertainty, as available data is typically scant. In this work, we present a sampling-based stochastic analysis of the hydraulic fracturing process by considering various system parameters to be random. Our analysis is based on the Perkins-Kern-Nordgren (PKN) model for hydraulic fracturing. This baseline model enables computation of high fidelity solutions, which avoids pollution of our stochastic results by inaccuracies in the deterministic solution procedure. In order to obtain the desired degree of accuracy of the computed solution, we supplement the employed time-dependent moving-mesh finite element method with two new enhancements: (i) global conservation of volume is enforced through a Lagrange multiplier; (ii) the weakly singular behavior of the solution at the fracture tip is resolved by supplementing the solution space with a tip enrichment function. This tip enrichment function enables the computation of the tip speed directly from its associated solution coefficient. A novel incremental-iterative solution procedure based on a backward-Euler time-integrator with sub-iterations is employed to solve the PKN model. Direct Monte-Carlo sampling is performed based on random variable and random field input parameters. The presented stochastic results quantify the dependence of the fracture evolution process—in particular the fracture length and fracture opening—on variations in the elastic properties and leak-off coefficient of the formation, and the height of the fracture., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Adaptive surrogates of crashworthiness models for multi-purpose engineering analyses accounting for uncertainty

  • Rocas Alonso, Marc
  • García González, Alberto
  • Larráyoz Izcara, Xabier
  • Díez, Pedro
© 2022 Elsevier. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Uncertainty Quantification (UQ) is a booming discipline for complex computational models based on the analysis of robustness, reliability and credibility. UQ analysis for nonlinear crash models with high dimensional outputs presents important challenges. In crashworthiness, nonlinear structural behaviours with multiple hidden modes require expensive models (18 h for a single run). Surrogate models (metamodels) allow substituting the full order model, introducing a response surface for a reduced training set of numerical experiments. Moreover, uncertain input and large number of degrees of freedom result in high dimensional problems, which derives to a bottle neck that blocks the computational efficiency of the metamodels. Kernel Principal Component Analysis (kPCA) is a multidimensionality reduction technique for non-linear problems, with the advantage of capturing the most relevant information from the response and improving the efficiency of the metamodel. Aiming to compute the minimum number of samples with the full order model. The proposed methodology is tested with a practical industrial problem that arises from the automotive industry., This work is partially funded by Generalitat de Catalunya (Grant Number 1278 SGR 2017-2019 and Pla de Doctorats Industrials 2017 DI 058) and Ministerio de Economía y Empresa and Ministerio de Ciencia, Innovación y Universidades (Grant Number DPI2017-85139-C2-2-R)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Error estimation and adaptivity for PGD based on complementary solutions applied to a simple 1D problem

  • Reis, Jonatha
  • Almeida, José Paulo Moitinho de
  • Díez, Pedro
  • Zlotnik, Sergio
The final authenticated version is available online at https://doi.org/10.1186/s40323-020-00180-3, Reduced order methods are powerful tools for the design and analysis of sophisticated systems, reducing computational costs and speeding up the development process. Among these reduced order methods, the Proper Generalized Decomposition is a well-established one, commonly used to deal with multi-dimensional problems that often suffer from the curse of dimensionality. Although the PGD method has been around for some time now, it still lacks mechanisms to assess the quality of the solutions obtained. This paper explores the dual error analysis in the scope of the PGD, using complementary solutions to compute error bounds and drive an adaptivity process, applied to a simple 1D problem. The energy of the error obtained from the dual analysis is used to determine the quality of the PGD approximations. We define a new adaptivity indicator based on the energy of the error and use it to drive parametric h- and p- adaptivity processes. The results are positive, with the indicator accurately capturing the parameter that will lead to lowest errors., Pedro Díez and Sergio Zlotink are grateful for the financial support provided by the Spanish Ministry of Economy and Competitiveness (Grant agreement No. DPI2017-85139-C2-2-R), the Generalitat de Catalunya (Grant agreement No. 2017-SGR-1278), and the project H2020-RISE MATH-ROCKS GA no 777778., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Numerical estimation of the bearing capacity of resistance spot welds in martensitic boron steels using a J-integral fracture criterion

  • Dorribo Dorribo, Daniel
  • Greve, Lars
  • Díez, Pedro
  • Arias Vicente, Irene
  • Larráyoz Izcara, Xabier
Predicting the bearing capacity of resistance spot welds (RSW) during vehicle crash tests has become a crucial task for the automotive industry, since the recent introduction of advanced high strength steels (AHSS) such as martensitic boron steels (e.g. 22MnB5). The spot weld joints of these steels exhibit relatively low bearing strengths, compared to those of more ductile high strength steels. Currently, the bearing capacity of spot weld joints is characterized through extensive experimental campaigns. In this article, a model for quantification of the bearing capacity of RSW using a finite-element J-integral fracture criterion is presented. The model takes into account geometric and mechanical features of the spot weld, namely the weld diameter and the mechanical properties distribution resulting from the welding process. An experimental loading test campaign is carried out for calibration and validation purposes, considering multiple sheet thickness combinations, loading angles and weld sizes. Experimental observations of the failed spot welds and preliminary simulations show that failure is caused mostly by stress concentration around the sharp weld notch. Consequently, the J-integral obtained from detailed finite element simulations is used to asses the stress/strain concentration along the first crack advance direction predicted by the acoustic tensor. The computed J-integral values are compared to the material toughness to obtain the joint’s maximum force. The resulting simulated and experimental bearing capacities show a good agreement for all tested configurations., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Fast stokes flow simulations for geophysical-geodynamic inverse problems and sensitivity analyses based on reduced order modeling

  • Ortega Gelabert, Olga
  • Zlotnik, Sergio
  • Afonso, Juan Carlos
  • Díez, Pedro
Markov chain Monte Carlo (MCMC) methods have become standard in Bayesian inference and multi-observable inversions in almost every discipline of the Earth sciences. In the case of geodynamic and/or coupled geophysical-geodynamic inverse problems, however, the computational cost associated with the solution of large-scale 3-D Stokes forward problems has rendered probabilistic formulations impractical. Here we present a novel and extremely efficient method to produce ultrafast solutions of the 3-D Stokes problem for MCMC simulations. Our approach combines the individual benefits of Reduced Basis techniques, goal-oriented error formulations, and MCMC algorithms to produce an accurate and computationally efficient surrogate for the forward problem. Importantly, the surrogate adapts itself during the MCMC simulation according to the history of the chain and the goals of the inversion. This maximizes the efficiency of the forward problem and removes the need for preinversion off-line computations to build a surrogate. We demonstrate the benefits and limitations of the method with several numerical examples and show that in all cases the computational cost is of the order of <1% compared to a traditional MCMC approach. The method is general enough to be applied to a range of problems, including uncertainty quantification/propagation, adjoint-based geodynamic inversions, sensitivity analyses in mantle convection problems, and in the creating surrogate models for complex forward problems (e.g., heat transfer, seismic tomography, and magnetotellurics)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A second-order face-centred finite volume method for elliptic problems

  • Vieira, Luan M.
  • Giacomini, Matteo
  • Sevilla Cárdenas, Rubén
  • Huerta, Antonio
© 2020 Elsevier. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, A second-order face-centred finite volume method (FCFV) is proposed. Contrary to the more popular cell-centred and vertex-centred finite volume (FV) techniques, the proposed method defines the solution on the faces of the mesh (edges in two dimensions). The method is based on a mixed formulation and therefore considers the solution and its gradient as independent unknowns. They are computed solving an element-by-element problem after the solution at the faces is determined. The proposed approach avoids the need of reconstructing the solution gradient, as required by cell-centred and vertex-centred FV methods. This strategy leads to a method that is insensitive to mesh distortion and stretching. The current method is second-order and requires the solution of a global system of equations of identical size and identical number of non-zero elements when compared to the recently proposed first-order FCFV. The formulation is presented for Poisson and Stokes problems. Numerical examples are used to illustrate the approximation properties of the method as well as to demonstrate its potential in three dimensional problems with complex geometries. The integration of a mesh adaptive procedure in the FCFV solution algorithm is also presented., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Hybridisable discontinuous Galerkin solution of geometrically parametrised Stokes flows

  • Sevilla Cárdenas, Rubén
  • Borchini, Luca
  • Giacomini, Matteo
  • Huerta, Antonio
© 2020. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, This paper proposes a novel computational framework for the solution of geometrically parametrised flow problems governed by the Stokes equation. The proposed method uses a high-order hybridisable discontinuous Galerkin formulation and the proper generalised decomposition rationale to construct an off-line solution for a given set of geometric parameters. The generalised solution contains the information for all the geometric parameters in a user-defined range and it can be used to compute sensitivities. The proposed approach circumvents many of the weaknesses of other approaches based on the proper generalised decomposition for computing generalised solutions of geometrically parametrised problems. Four numerical examples show the optimal mesh convergence properties of the proposed method and demonstrate its applicability in two and three dimensions, with particular emphasis on parametrised flows in microfluidics., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Proper generalized decomposition solutions for composite laminates parametrized with fibre orientations

  • El-ghamrawy, Karim Mohamed Shaker Ibrahim
  • Zlotnik, Sergio
  • Auricchio, Ferdinando
  • Díez, Pedro
The version of record is available online at: http://dx.doi.org/10.1007/s00466-022-02218-2, Composite materials are gaining popularity as an alternative to classical materials in many different applications. Moreover, their design is even more flexible due to the potential of additive manufacturing. Thus, one can produce a tailored composite laminate with the optimal values of some design parameters providing the desired mechanical performance. In this context, having a parametric numerical model for the mechanical response of the composite laminate is essential to compute the optimal parameters. In the present paper, the design parameters under consideration are the angles describing the orientation of the reinforcement fibers in different layers or patches of the composite laminates. We obtain a generalized solution using Proper Generalized Decomposition (PGD) which is adopted to provide solutions with explicit parametric dependence. The Tsai-Wu failure criterion is used to estimate first ply failure. In this context, Tsai-Wu criterion is used as the objective function for the optimization of the fibre orientations in the laminate. The PGD solution provides also sensitivities for a gradient-based optimization algorithm. The potentiality and efficiency of the presented approach is demonstrated through some numerical tests., Karim El-Ghamrawy was supported by the European Education, Audiovisual and Culture Executive Agency (EACEA) under the Erasmus Mundus Joint Doctorate “Simulation in Engineering and Entrepreneurship Development (SEED)", FPA 2013-0043. Pedro Díez and Sergio Zlotnik are grateful for the financial support provided by the Spanish Ministry of Economy and Competitiveness (Grant agreement No. DPI2017-85139-C2-2-R) and by the Generalitat de Catalunya (Grant agreement No. 2017-SGR-1278, and the project H2020-RISE MATH-ROCKS GA n∘777778. This work was also partially supported by the Italian Minister of University and Research through the project “A BRIDGE TO THE FUTURE: Computational methods, innovative applications, experimental validations of new materials and technologies” (No. 2017L7X3CS) within the PRIN 2017 program., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Hybrid coupling of CG and HDG discretizations based on Nitsche’s method

  • Spina, Andrea la
  • Giacomini, Matteo
  • Huerta, Antonio
This is a post-peer-review, pre-copyedit version of an article published in Computational mechanics. The final authenticated version is available online at: http://dx.doi.org/10.1007/s00466-019-01770-8, A strategy to couple continuous Galerkin (CG) and hybridizable discontinuous Galerkin (HDG) discretizations based only on the HDG hybrid variable is presented for linear thermal and elastic problems. The hybrid CG-HDG coupling exploits the definition of the numerical flux and the trace of the solution on the mesh faces to impose the transmission conditions between the CG and HDG subdomains. The con- tinuity of the solution is imposed in the CG problem via Nitsche’s method, whereas the equilibrium of the flux at the interface is naturally enforced as a Neumann con- dition in the HDG global problem. The proposed strategy does not affect the core structure of CG and HDG discretizations. In fact, the resulting formulation leads to a minimally-intrusive coupling, suitable to be integrated in existing CG and HDG libraries. Numerical experiments in two and three dimensions show optimal global convergence of the stress and superconvergence of the displacement field, locking-free approximation, as well as the potential to treat structural problems of engineering interest featuring multiple materials with compressible and nearly incompressible behaviors., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A second-order face-centred finite volume method on general meshes with automatic mesh adaptation

  • Giacomini, Matteo
  • Sevilla Cárdenas, Rubén
This is the peer reviewed version of the following article: Giacomini, M.; Sevilla, R. A second-order face-centred finite volume method on general meshes with automatic mesh adaptation. "International journal for numerical methods in engineering", 1 Gener 2020, which has been published in final form at https://onlinelibrary.wiley.com/doi/full/10.1002/nme.6428. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving, A second-order face-centred finite volume strategy on general meshes is pro-posed. The method uses a mixed formulation in which a constant approximationof the unknown is computed on the faces of the mesh. Such information is thenused to solve a set of problems, independent cell-by-cell, to retrieve the local val-ues of the solution and its gradient. The main novelty of this approach is theintroduction of a new basis function, utilised for the linear approximation ofthe primal variable in each cell. Contrary to the commonly used nodal basis,the proposed basis is suitable for computations on general meshes, includingmeshes with different cell types. The resulting approach provides second-orderaccuracy for the solution and first-order for its gradient, without the need ofreconstruction procedures, is robust in the incompressible limit and insensitiveto cell distortion and stretching. The second-order accuracy of the solution isexploited to devise an automatic mesh adaptivity strategy. An efficient error indi-cator is obtained from the computation of one extra local problem, independentcell-by-cell, and is used to drive mesh adaptivity. Numerical examples illus-trating the approximation properties of the method and of the mesh adaptivityprocedure are presented. The potential of the proposed method with automaticmesh adaptation is demonstrated in the context of microfluidics., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A combined reduced order-full order methodology for the solution of 3D magneto-mechanical problems with application to magnetic resonance imaging scanners

  • Seoane Chouciño, Marcos
  • Ledger, Paul D.
  • Gil, Antonio
  • Zlotnik, Sergio
  • Mallett, Mike
This is the peer reviewed version of the following article: Seoane, M. [et al.]. A combined reduced order-full order methodology for the solution of 3D magneto-mechanical problems with application to magnetic resonance imaging scanners. "International journal for numerical methods in engineering", 1 Gener 2020, vol. 121, núm. 16, p. 3529-3559. , which has been published in final form athttps://onlinelibrary.wiley.com/doi/abs/10.1002/nme.6369. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving., The design of a new magnetic resonance imaging (MRI) scanner requires multiple numerical simulations of the same magneto-mechanical problem for varying model parameters, such as frequency and electric conductivity, in order to ensure that the vibrations, noise, and heat dissipation are minimized. The high computational cost required for these repeated simulations leads to a bottleneck in the design process due to an increased design time and, thus, a higher cost. To alleviate these issues, the application of reduced order modeling techniques, which are able to find a general solution to high-dimensional parametric problems in a very efficient manner, is considered. Building on the established proper orthogonal decomposition technique available in the literature, the main novelty of this work is an efficient implementation for the solution of 3D magneto-mechanical problems in the context of challenging MRI configurations. This methodology provides a general solution for varying parameters of interest. The accuracy and efficiency of the method are proven by applying it to challenging MRI configurations and comparing with the full-order solution., Generalitat de Catalunya, 2017‐SGR‐1278; Marie Sklodowska‐Curie Innovative Training Network AdMoRe, 675919; Spanish Ministry of Economy and Competitiveness, DPI2017‐85139‐C2‐2‐R, Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Building a certified reduced basis for coupled thermo-hydro-mechanical systems with goal-oriented error estimation

  • Larion, Ygee
  • Zlotnik, Sergio
  • Massart, Thierry J.
  • Díez, Pedro
This is a post-peer-review, pre-copyedit version of an article published in Computational mechanics. The final authenticated version is available online at: http://dx.doi.org/10.1007/s00466-020-01865-7, A goal-oriented a-posteriori error estimator is developed for transient coupled thermo-hydro-mechanical (THM) parametric problems solved with a reduced basis approximation. The estimator assesses the error in some specific Quantity of Interest (QoI). The goal-oriented error estimate is derived based on explicitly-computed weak residual of the primal problem and implicitly-computed adjoint solution associated with the QoI. The time-dependence of the coupled THM system poses an additional complexity as the auxiliary adjoint problem evolves backwards in time. The error estimator guides a greedy adaptive procedure that constructs progressively an optimal reduced basis by smartly selecting snapshot points over a given parametric training sample. The reduced basis obtained is used to drastically reduce the coupled system spatial degrees of freedom by several orders of magnitude. The computational gain obtained from the developed methodology is demonstrated through applications in 2D and 3D parametrized problems simulating the evolution of coupled THM processes in rock masses., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Using reduced basis approximation for efficient surrogate-based inverse identification of thermo-hydro-mechanical parameters from an in situ heating test

  • Larion, Ygee
  • Chen, Guangjing
  • Zlotnik, Sergio
  • Díez, Pedro
  • Seetharam, Suresh
  • Massart, Thierry J.
The version of record is available online at: http://dx.doi.org/10.1007/s00603-022-02925-5, In this paper, a reduced-order model built from the reduced basis (RB) method is used as a surrogate for an inverse identification problem related to coupled thermo-hydro-mechanical (THM) processes. The RB space—spanned by solutions of the governing THM equations—is constructed using a greedy adaptive procedure guided by an a posteriori error estimator that selects the optimal snapshot points in a given parametric space. The RB model is assessed in terms of accuracy and computational cost reduction for the three-dimensional transient coupled problem described by the ATLAS III small-scale in situ heating test. The substantial system size reduction and the associated significant computational gain result in a surrogate model suitable for parameter identification procedures in the Boom Clay material. The effectiveness of the proposed strategy is demonstrated by performing inverse analysis based on direct-search and genetic algorithm (GA) optimization supported by real sensor measurement data where 800 times faster computational speed-up was achieved., We acknowledge the funding support from the European Commission Education, Audiovisual and Culture Executive Agency (EACEA) under Erasmus Mundus Joint Doctorate Simulation in Engineering and Entrepreneurship Development (SEED), FPA 2013-0043 and SCK CEN for funding the 4th year PhD study of the first author. S. Zlotnik and P. Díez would like to thank the funding from the Generalitat de Catalunya 2017-SGR-1278, the project DPI2017-85139-C2-2-R funded by the Spanish Ministry and the project H2020-RISE MATHROCKS GA no. 777778., Peer Reviewed, Postprint (author's final draft)