[EN] Fifty years after the first human landed on the Moon mankind has started
to plan the next steps for manned space exploration missions. When the
time required to return to Earth exceeds 400-500 days (as in travels to Mars),
the level of independence that the crew must possess is highly increased.
To ensure the survival and good living conditions of this future explorers,
new developments regarding medical infrastructure and resources must be
carried out.
In this work, the topic of this study was to investigate how 3D printing
and bioprinting can be of use to improve the autonomy of the crew when
facing the most probable clinical scenarios that can occur in long-term
space exploratory missions. The printing parameters of thermoplastics,
such as polycaprolactone (PCL), that can be used as a possible support
material along bioprinting were studied, including the use or not of
alternate layers or the printing starting point. For bioprinting, and taking
bone constructs as the tissue of study, a new bioink based on human
plasma (which potentially could be derived from the injured astronaut who
needs the treatment), alginate, and methylcellulose (that can be grow and
used in isolated areas) was designed. An inverted bioprinter was designed
and built to be able to test the work capacity of this biomaterial in altered
gravity conditions.
As result, it was observed that the use of alternated layers involves the
generation of more anisotropic structures, as the z-axis pore is limited to the
layer height, while the x and y-pore size can be tailored to specific needs. The
defects created because of the alignment, or the lack of it, at the new layer
starting point, significantly affects the mechanical behavior of the scaffolds.
ix
The cooling down rate, or even printing speed, can be modified to obtain
more chaotic micropatterns including nanofibers without the need of using
further technologies. A plasma-based bioink was successfully designed and
combined with hydroxyapatite-forming CPC which resembles the native
mineral phase of bone. The results have shown that the plasma-based bioink
and CPC form a synergistic system supporting adhesion, proliferation, and
osteogenic differentiation of bone cells.
Thanks to the inverted bioprinter, it has been demonstrated that the
developed bioinks and support materials, like CPC, are suitable for
extrusion (bio)printing. They are so adhesive that they can even be printed
upside-down and therefore, against Earth’s gravity. Therefore, they could
be used at altered gravity conditions on space exploration missions., [ES] Cincuenta años después de que el primer ser humano aterrizara en la
Luna, la humanidad ha comenzado a planificar los próximos pasos para las
misiones de exploración espacial tripuladas. Cuando el tiempo necesario
para regresar a la Tierra supera los 400 - 500 días (como en los viajes a
Marte), el nivel de independencia que debe poseer la tripulación aumenta
considerablemente. Para garantizar la supervivencia y las buenas
condiciones de vida de estos futuros exploradores, se deben realizar
nuevos desarrollos en cuanto a infraestructuras y recursos médicos.
En este trabajo, se estudió cómo la impresión 3D y la bioimpresión
pueden ser de utilidad para mejorar la autonomía de la tripulación ante los
escenarios clínicos más probables que pueden ocurrir en misiones de larga
duración. Para ello se estudiaron algunos parámetros de impresión de
termoplásticos, como la policaprolactona (PCL), que pueden utilizarse
x
como posible material de soporte a lo largo de la bioimpresión (ejemplo de
parámetros: uso o no de capas alternas o la alineación del punto de partida
de la impresión en cada capa). Para la bioimpresión, y tomando las
construcciones óseas como tejido de estudio, se diseñó un nuevo material
compuesto a base de plasma humano (que puede ser obtenido de los
astronautas), alginato y metilcelulosa (que se puede obtener y utilizar en
áreas aisladas). Se diseñó y construyó una bioimpresora invertida para
poder probar la capacidad de trabajo de este biomaterial en condiciones de
gravedad alterada.
Como resultado se obtuvo que el uso de capas alternas implica la
generación de más estructuras anisotrópicas, ya que normalmente el poro
del eje z está limitado a la altura de la capa, mientras que el tamaño de los
poros x e y se pueden adaptar a necesidades especıificas. Los defectos
creados por la alineación, o la falta de ella, en el punto de inicio de la
nueva capa, afectan significativamente al comportamiento mecánico de los
andamios. La velocidad de enfriamiento, o incluso la velocidad de
impresión, se puede modificar para obtener micropatrones más caóticos,
incluso nanofibras, sin necesidad de utilizar tecnologías adicionales. Se
diseñó con éxito una biotinta a base de plasma y se combinó con un
cemento de fosfato cálcico formador de hidroxiapatita, que se asemeja al
mineral nativo del hueso. Nuestros resultados mostraron que la deposición
combinada de la biotinta basada en plasma y la pasta de CPC para dar
lugar a constructos celularizados, forman un sistema sinérgico que apoya la
adhesión, la proliferación y la diferenciación osteogénica de las células
óseas.
Gracias a la bioimpresora invertida desarrollada, se ha podido demostrar
que la biotinta desarrollada y los materiales de soporte, como el cemento
óseo de fosfato cálcico autoajustable, son aptos para la (bio)impresión
extrusión. Son tan adhesivos que incluso se pueden imprimir al revés y, por
lo tanto, contra la gravedad de la Tierra, pudiendo usarse en condiciones
de gravedad alterada., DAAD Research Grant. Program: Short-Term Grants, 2018 (57378443).
– Project "3D Printing of Living Tissue for Space Exploration" funded
from the European Space Agency (ESA). Funds came them partially
by the University of Dresden via a contract (No.
4000123640/17/NL/BJ/gp/TUD) of OHB System AG, Bremen and by
OHB System AG itself, under a contract of the European Space
Agency ESA (contract No. 4000123640/18/NL/BJ/gp).
– "Low intensity ultrasounds for early detection and modulation of
tumour and stroma". Convocatoria Proyecto Retos I+D+i 2017.
AEI/FEDER: DPI2017-90147-R. Entidad financiadora: Agencia Estatal
de Investigación, Ministerio de Economía, Industria y
Competitividad, Gobierno de España., Peer reviewed