Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Understanding the performance of the multiple injection gasoline partially premixed combustion concept implemented in a 2-Stroke high speed direct injection compression ignition engine

  • Benajes, Jesús|||0000-0002-1653-9188
  • Martín, Jaime|||0000-0002-0496-3176
  • Novella Rosa, Ricardo|||0000-0002-5123-6924
  • Thein, Kévin Jean Lucien
The newly designed Partially Premixed Combustion (PPC) concept operating with high octane fuels like gasoline has confirmed the possibility to combine low NOx and soot emissions keeping high indicated efficiencies, while offering a control over combustion profile and phasing through the injection settings. The potential of this PPC concept regarding pollutant control was experimentally evaluated using a commercial gasoline with Research Octane Number (RON) of 95 in a newly-designed 2-Stroke poppet valves Compression Ignition (Cl) engine for automotive applications. Previous experimental results confirmed how the wide control of the cylinder gas temperature provided by the air management settings brings the possibility to achieve stable gasoline PPC combustion at low and medium speed conditions (1250-2000 rpm) for the whole load range (3.1-10.4 bar IMEP) with good combustion stability (Coefficient of Variation (Coy) of IMEP below 3%), high combustiOn efficiency (over 97%), and low NOx/soot levels. In this context, present research focuses on the two main specific drawbacks of this concept. Firstly, the high Brake Specific Fuel Consumption (BSFC) due to the work required by the mechanical supercharger since the turbocharging system does not provide the suitable pressure ratio at low speeds. Secondly, the high level of noise generated by the combustion process, especially at high loads. Therefore, a dedicated analysis has been carried out to fully exploit the benefits of the gasoline PPC concept combined with the innovative 2-Stroke engine architecture with the aim of identify and break the most relevant trade-offs., The authors kindly recognize the technical support provided by Mr. Pascal Tribotte from RENAULT SAS in the frame of the DREAM-DELTA-68530-13-3205 Project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Impact of injection settings operating with the gasoline Partially Premixed Combustion concept in a 2-stroke HSDI compression ignition engine

  • Benajes, Jesús|||0000-0002-1653-9188
  • Novella Rosa, Ricardo|||0000-0002-5123-6924
  • De Lima, D.
  • Thein, Kévin Jean Lucien
[EN] Partially Premixed Combustion (PPC) using gasoline-like fuels has proven its potential to control or even break the NOx and soot emissions trade-off, retaining the high efficiency levels characteristic of the conventional diesel combustion (CDC) concept. However, selecting an appropriate fuel and a suitable injection strategy is essential to assure a successful PPC operation in the full engine map. Additionally, extending the limit of PPC beyond 10 bar IMEP was not possible due to excessively high pressure gradients and onset of knocking-like combustion, so the CDC concept has to be adopted and the conventional trade-off between NOx and soot emissions was recovered. Present investigation focuses on evaluating the use of a multiple injection strategy for extending the load range of the PPC concept to medium/high load conditions, when using a commercial RON95 gasoline in a 2-stroke engine under development. Experimental results confirm how with a fine tuned triple injection strategy it is possible to reach extremely low NOx and soot levels keeping combustion efficiency over 96%, while indicated efficiency is improved compared to a well-optimized point obtained operating with the CDC concept. Finally, the research work is completed by including 3D-CFD modeling activities that are carried out to contribute to the understanding on how the mixture preparation and stratification prior to the start of combustion impacts its development and particularly the experimentally observed pollutant emissions trends., This work was partly funded by the Generalitat Valenciana Spain, project PROMETEOII/2014/043. The authors kindly recognize the technical support provided by Mr. Pascal Tribotte from RENAULT SAS - France in the frame of the DREAM-DELTA-68530-13-3205 Project
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Implementation of the Partially Premixed Combustion concept in a 2-stroke HSDI diesel engine fueled with gasoline

  • Benajes, Jesús|||0000-0002-1653-9188
  • Molina, Santiago|||0000-0001-7879-2421
  • Novella Rosa, Ricardo|||0000-0002-5123-6924
  • De Lima Moradell, Daniela Andreina
Partially Premixed Combustion (PPC) of fuels in the gasoline octane range has proven to combine low NOX and soot emissions with high indicated efficiencies, while still retaining control over combustion phasing with the injection event. Previous research performed in four-stroke engines, has shown how the operating region where gasoline PPC concept can be successfully implemented is largely linked to the octane number of the fuel, making difficult to cover the entire load range with a fixed fuel. In this framework, 2-stroke engines arise as a promising solution to extend the load range of gasoline PPC concept, since it intrinsically provides equivalent torque response with only half the IMEP required in a 4-stroke cycle. Moreover, 2-stroke architecture provides high flexibility on the air management parameters to substantially control the cylinder conditions and affect the combustion environment, allowing proper combustion control even in low load conditions. An experimental investigation has been performed to evaluate the potential of the PPC concept for pollutant control, using a commercial gasoline with Research Octane Number of 95 in a newly-designed 2-stroke poppet valves automotive diesel engine. The experimental results confirm how it is possible to achieve stable gasoline PPC combustion at a low speed medium load point (1200 rpm, 5 bar IMEP); with good combustion stability (σIMEP below 3%), high combustion efficiency (over 98%), and low NOX and zero soot levels; thanks to the wide control of the cylinder gas temperature provided by the air management settings. Nevertheless, in agreement to the results reported in the literature, the indicated cycle efficiency attained at this low load operating condition is lower than the obtained in conventional diesel combustion conditions. Therefore, a dedicated optimization process of the engine hardware and engine settings is required to fully exploit the benefits of gasoline PPC concept in the investigated 2-stroke engine architecture., The authors of this paper thank the Spanish Ministry of Economy and Competitiveness for the financial support of this research through the Project TRA 2010-20271 (LOWTECOM).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effects of multiple injection strategies on gaseous emissions and particle size distribution in a two-stroke compression-ignition engine operating with the gasoline partially premixed combustion concept

  • Bermúdez, Vicente|||0000-0002-2781-5598
  • Ruiz-Rosales, Santiago|||0000-0001-9536-3696
  • Novella Rosa, Ricardo|||0000-0002-5123-6924
  • Soto-Izquierdo, Lian
[EN] In order to improve performance of internal combustion engines and meet the requirements of the new pollutant emission regulations, advanced combustion strategies have been investigated. The newly designed partially premixed combustion concept has demonstrated its potential for reducing NOx and particulate matter emissions combined with high indicated efficiencies while still retaining proper control over combustion process by using different injection strategies. In this study, parametric variations of injection pressure, second injection and third injection timings were experimentally performed to analyze the effect of the injection strategy over the air/fuel mixture process and its consequent impact on gaseous compound emissions and particulate matter emissions including its size distribution. Tests were carried out on a newly designed two-stroke high-speed direct injection compression-ignition engine operating with the partially premixed combustion concept using 95 research octane number gasoline fuel. A scanning particle sizer was used to measure the particles size distribution and the HORIBA 7100DEGR gas analyzer system to determine gaseous emissions. Three different steady-state operation modes in terms of indicated mean effective pressure and engine speed were investigated: 3.5 bar indicated mean effective pressure and 2000 r/min, 5.5 bar indicated mean effective pressure and 2000 r/min, and 5.5 bar indicated mean effective pressure and 2500 r/min. The experimental results confirm how the use of an adequate injection strategy is indispensable to obtain low exhaust emissions values and a balance between the different pollutants. With the increase in the injection pressure and delay in the second injection, it was possible to obtain a trade-off between NOx and particulate matter emission reduction, while there was an increase in hydrocarbon and carbon monoxide emissions under these conditions. In addition, the experiments showed an increase in particle number emissions and a progressive shift in the particles size distribution toward larger sizes, increasing the accumulation-mode particles and reducing the nucleation-mode particles with the decrease in the injection pressure and delay in the third injection., The authors kindly recognize the technical support provided by Mr Pascal Tribotte from RENAULT SAS in the frame of the DREAM-DELTA-68530-13-3205 Project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Combustion noise analysis of partially premixed combustion concept using gasoline fuel in a 2-stroke engine

  • Broatch, A.|||0000-0001-9991-1039
  • Margot , Xandra|||0000-0002-2639-0444
  • Novella Rosa, Ricardo|||0000-0002-5123-6924
  • Gómez-Soriano, Josep|||0000-0002-2742-9224
In the last decade, different advanced combustion concepts based on generating totally or partially premixed conditions have been investigated in CI (compression ignition) engines with the aim of achieving lower NOx (nitrous oxides) and soot emissions. Most of the drawbacks inherent to this type of combustions, such as the combustion phasing control or combustion stability, can be mitigated by combining the PPC (Partially Premixed Combustion) concept fueled by gasoline and a small 2-stroke HSDI (high speed direct ignition) engine. However, combustion noise issue remains unsolved while it is a critical aspect due to its strong influence in the customer purchasing decision and compliance of more stringent regulations. In this work, an analysis of the combustion noise generated by PPC combustion concept is performed in order to identify the most influential parameters and to define key paths for controlling the noise level. In addition, 3D CFD (Computational Fluid Dynamics) simulations have been performed to further understand the combustion noise generation mechanisms. Results evidence how the strong impact of the maximum pressure time-derivative achieved during combustion process renders all other sources of noise generation irrelevant. The trade-off between combustion noise and combustion efficiency of this PPC concept has been confirmed, while the intrinsic relation between such parameters and the engine efficiency has been also evaluated., The authors kindly recognize the technical support provided by Mr. Pascal Tribotte from RENAULT SAS in the frame of the DREAM-DELTA-68530-13-3205 Project.