Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 39
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tar abatement for clean syngas production during biomass gasification in a dual fluidized bed

  • Diego Poza, Luis F. de
  • García Labiano, Francisco
  • Gayán Sanz, Pilar
  • Abad Secades, Alberto
  • Mendiara, Teresa
  • Adánez Elorza, Juan
  • Nacken, M.
  • Heidenreich, S.
© 2016. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Syngas obtained from biomass gasification needs to fulfil strong purity requirements before being used as raw material in power energy generation or chemicals manufacturing. The use of hot catalytic filter candles inside the freeboard of fluidized bed gasifiers allows obtaining clean syngas without dust and low tar content. The tar removal efficiency of four different catalytic filter designs was evaluated with real biomass tar produced in situ in a dual fluidized bed gasifier (DFBG). The tar conversion reached at the outlet of the fluidized bed gasifier was larger for the candles with catalytically active layer design. If a monolith is also incorporated, the tar conversion increases up to 95% which is one of the highest values obtained up to date. In this case, the tar content at the outlet of the catalytic filter was as low as 0.2 g/Nm3 (N2 free, d.b.)., This work was supported by the European Commission (EC Project UNIQUE Nº211517-ENERGY FP7-2008/2011) and the Spanish Ministry MINECO (ENE2014-56857-R). T. Mendiara thanks for the ‘‘Ramón y Cajal’’ post-doctoral contract awarded by the Spanish Ministry of Economy and Competitiveness., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Long-lasting Cu-based oxygen carrier material for industrial scale in Chemical Looping Combustion

  • Cabello Flores, Arturo
  • Gayán Sanz, Pilar
  • Abad Secades, Alberto
  • Diego Poza, Luis F. de
  • García Labiano, Francisco
  • Izquierdo Pantoja, María Teresa
  • Scullard, Andrew
  • Williams, Gareth
  • Adánez Elorza, Juan
© 2016. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, One of the most important current objectives of the Chemical Looping Combustion (CLC) technology for gaseous fuels lies in scaling-up the aforementioned technology in the short term from 100 kWth to 10 MWth scale. In order to meet this challenge, the commercial availability of suitable multi ton-scale oxygen carrier materials at competitive price is needed. In this work, a Cu-based oxygen carrier prepared by the impregnation method using a commercial alumina as support, referred as Cu14γAl_Commercial, has been developed and evaluated in a 500 Wth CLC pilot plant during the combustion of CH4 at two different temperatures, i.e., 800 °C and 900 °C. The outstanding results obtained in terms of both combustion efficiency and mechanical stability have shown that the Cu14γAl_Commercial impregnated oxygen carrier can be selected to upscale CLC technology for gaseous fuels., The work presented in this article is partially funded by the Spanish Ministry of Economy and Competitiveness (ENE 2014-56857-R), by the European Regional Development Fund (ERDF), and by the European Commission Seventh Framework Programme under the grant agreement No. 608571 (Project acronym SUCCESS). A. Abad and A. Cabello thank CSIC for the financial support given to the project 201480E101., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Coal combustion with a spray granulated Cu-Mn mixed oxide for the Chemical Looping Oxygen Uncoupling (CLOU) process

  • Adánez-Rubio, Iñaki
  • Abad Secades, Alberto
  • Gayán Sanz, Pilar
  • García Labiano, Francisco
  • Diego Poza, Luis F. de
  • Adánez Elorza, Juan
© 2017. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, The Chemical Looping with Oxygen Uncoupling (CLOU) process is a form of Chemical Looping Combustion (CLC) technology that enables the combustion of solid fuels by means of oxygen carriers that release gaseous oxygen in the fuel reactor, i.e. with oxygen uncoupling capability. In recent years, tests have found several Cu-based, Mn-based and mixed oxide oxygen carriers with suitable properties for the CLOU process. Among them, Cu-Mn mixed oxides show high reactivity and high O2 equilibrium concentration at temperatures of interest for coal combustion. In this work, proof of concept was demonstrated by burning coal with Cu-Mn mixed oxides in a 1.5 kWth CLOU unit for the first time. The effect of fuel reactor temperature, solids circulation flow, fluidization agent in the fuel reactor (inert N2 or steam as gasifying agent), and excess air in the air reactor on combustion efficiency and CO2 capture rate was analysed. The results showed that high combustion efficiency and CO2 capture are feasible using this material at relatively low fuel reactor operating temperatures. Therefore, the developed Cu-Mn mixed oxide was a suitable material for use as an oxygen carrier for the CLOU combustion of solid fuels. Optimum operating conditions were determined for this oxygen carrier with regard to the oxygen circulation rate and air reactor conditions for the regeneration of the oxygen carrier., This work was supported by the Spanish Ministry of Economy, Industry and Competitiveness (MINECO Project: ENE2013-45454-R, ENE2014-56857-R and ENE2016-77982-R) and the European Union FEDER funds. Our thanks to Ing. Konrad Holscher from Mina Invierno Chile, for supplying the subbituminous coal., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

In situ gasification Chemical-Looping Combustion of coal using limestone as oxygen carrier precursor and sulphur sorbent

  • Abad Secades, Alberto
  • Obras-Loscertales, Margarita de las
  • García Labiano, Francisco
  • Diego Poza, Luis F. de
  • Gayán Sanz, Pilar
  • Adánez Elorza, Juan
© 2017. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, In-situ Gasification Chemical-Looping Combustion (iG-CLC) burning coal is achieving a great interest due to the possibility of using low cost oxygen carriers such as CaSO4. The Limestone Chemical Looping Combustion process (LCL-CTM) registered by Alstom Power Inc. proposes the use of a continuous CaCO3 feeding together with coal to produce CaSO4 as an oxygen carrier via sulphur retention. The operation is similar to what happens in a circulating fluidized bed boiler burning coal. In the present research work, the study of thermodynamic equilibrium limitations together with mass and enthalpy balances have been carried out for a CLC system in order to investigate whether the LCL-CTM process is a promising and energy efficient option to carry out the coal combustion with CO2 capture and in-situ desulphurisation. So, no limitations were found to transfer the required oxygen from air to fuel using sulphated limestone as oxygen carrier for whatever coal used. However, coals with sulphur content above 1 wt.% are advisable to perform this process. In addition, no drawback referred to thermal integration in the system has been detected. Thus, operation at 950 ºC in the fuel reactor to avoid SO2 release via side reactions, and 1000 ºC in the air reactor is feasible. Likewise, experimental tests have been performed in a thermogravimetric analyser to analyse the capability of a limestone to be sulphated and to transfer oxygen. A value of the oxygen transport capacity of about 16.7 wt.% was obtained. This value is four times higher than that of others typical inexpensive oxygen carriers published in literature., The work presented in this article is partially funded by the Spanish Ministry of Economy and Competitiveness (ENE 2014-56857-R, ENE2013-45454-R) and by the European Regional Development Fund (ERDF). A. Abad thanks CSIC for the financial support given to the project 201480E101., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Steam, dry, and steam-dry chemical looping reforming of diesel fuel in a 1kWth unit

  • García-Díez, Enrique
  • García Labiano, Francisco
  • Diego Poza, Luis F. de
  • Abad Secades, Alberto
  • Gayán Sanz, Pilar
  • Adánez Elorza, Juan
  • Ruiz, J. A. C.
© 2017. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Chemical looping reforming (CLR) is a process that enables the production of syngas/H2 with CO2 capture by using oxygen carriers that prevent direct contact between the fuel and air. This work presents the experimental results obtained in a 1 kWth CLR unit using a Ni-based oxygen carrier and diesel as fuel, as a first trial for further advancement with heavier liquid fuels. The influence of the main operating conditions, such as oxygen-to-diesel molar ratio and the H2O and/or CO2 feed into the system, was analysed in both steam and dry CLR processes. In addition, the combined steam-dry CLR process enabled the production of syngas with any H2/CO molar ratio between 0.2 and 3, which resulted in a wide variety of final products during its use in Fischer-Tropsch processes. In all cases, the syngas composition was close to that given by the thermodynamic equilibrium. These results demonstrate the technical feasibility of steam, dry, and combined steam-dry reforming processes for liquid fossil fuels in a chemical looping system., This work was supported by the Spanish Ministry for Science and Innovation (MICINN project ENE2011-26354, and ENE2014-56857-R), the European Regional Development (ERDF), the Government of Aragón (Spain, DGA ref. T06), and by CTGAS-ER (project OTT20130989)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Titanium substituted manganese-ferrite as an oxygen carrier with permanent magnetic properties for chemical looping combustion of solid fuels

  • Abián, María
  • Abad Secades, Alberto
  • Izquierdo Pantoja, María Teresa
  • Gayán Sanz, Pilar
  • Diego Poza, Luis F. de
  • García Labiano, Francisco
  • Adánez Elorza, Juan
© 2017. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Mixed oxides of Mn-Fe have been identified as suitable materials for Chemical Looping Combustion (CLC) with solid fuels both via in-situ Gasification Chemical Looping Combustion (iG-CLC) and Chemical Looping with Oxygen Uncoupling (CLOU) processes. These materials show the property of react with gaseous fuels as well as release oxygen under given conditions, while cheap metals are used. In addition, these materials can show magnetic properties that can be used for an easy separation from ash in CLC with solid fuels. Thus, losses of oxygen carrier material in the ash drain stream would be reduced. Different cations have been proposed for improving the magnetic properties of manganese ferrites, including Ti4+. In this context, the present work accomplishes a screening of (MnxFe1−x)2O3 doped with 7 wt.% TiO2, with x ranging from 0 to 1. The influence of Mn:Fe ratio on their physical and chemical properties was evaluated. In general, particles with high crushing strength values (>4 N) were obtained, and magnetic characteristics were highlighted when x ⩽ 0.66. The oxygen uncoupling capability depended on the Mn:Fe ratio and the oxidation conditions, i.e. temperature and oxygen partial pressure. Broader oxidation conditions to take advantage of the oxygen uncoupling capability were found for materials with low Mn content. On contrary, the reactivity with fuel gases (CH4, H2 and CO) increased with the Mn content. Thus, oxygen carriers with Mn/(Mn + Fe) molar ratio in the 0.5–0.9 interval showed interesting properties at suitable temperatures for the iG-CLC and CLOU processes (i.e. 850–980 °C). The material with Mn/(Mn + Fe) = 0.55 was preferred considering a trade-off between reactivity and magnetic properties., This work was partially supported by the Spanish Ministry for Economy and Competitiveness via the ENE2013-45454-R and ENE2014-56857-R projects, by the European Regional Development Fund (ERDF), and by the CSIC via the 2014-80E101 project. M. Abián acknowledges the MINECO and Instituto de Carboquímica (ICB-CSIC) for the post-doctoral grant awarded (FPDI-2013-16172)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Development of (Mn0.77Fe0.23)2O3 particles as an oxygen carrier for coal combustion with CO2 capture via in-situ gasification Chemical Looping Combustion (iG-CLC) aided by Oxygen Uncoupling (CLOU)

  • Pérez-Vega, Raúl
  • Abad Secades, Alberto
  • Gayán Sanz, Pilar
  • Diego Poza, Luis F. de
  • García Labiano, Francisco
  • Adánez Elorza, Juan
© 2017. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Chemical looping combustion (CLC) involves the use of a solid oxygen carrier to transport the oxygen from the air to a fuel. Attention has recently been focused on oxygen carriers based on Mn-Fe mixed oxides because they are cheap materials that are able to release oxygen at high temperature, the so-called oxygen uncoupling step. The aim of this work was to assess the use of (Mn0.77Fe0.23)2O3 material as an oxygen carrier with the ability to transport oxygen both by reduction with gaseous fuels and by oxygen uncoupling, i.e. typical mechanisms in CLC and in Chemical Looping with Oxygen Uncoupling (CLOU), respectively. The particles prepared by mechanical mixing were screened to obtain particles of sufficient reactivity and mechanical strength for use in a fluidized bed reactor. The preparation methodology and calcining temperature were varied. The reactivity of one selected material was evaluated by performing redox cycles both in a TGA and a batch fluidized-bed reactor. Thus, its behaviour was assessed during both decomposition-regeneration of bixbyite phase [(Mn0.77Fe0.23)2O3] in CLOU and the reduction-oxidation of spinel phase [(Mn0.77Fe0.23)3O4] with gaseous fuels, i.e. H2, CO and CH4. Its oxygen uncoupling and re-oxidation capability was highly influenced by the reaction temperature and oxygen concentration. On the other hand, CLC redox cycles with gaseous fuels showed high reactivity with H2 and CO and high oxygen transport capacity by reduction to mangano-wüstite phase [(Mn0.77Fe0.23)O]. Good fluid-dynamic behaviour was observed for the oxygen carrier particles along the redox cycles without agglomeration problems, regardless of the operating conditions used in the batch fluidized-bed reactor. Thus, the selected material was considered a promising candidate for use in both in CLC with syngas and CLC with coal., This work was partially supported by the Spanish Ministry for Economy and Competitiveness via the ENE2013-45454-R, ENE2014-56857-R and ENE2016-77982-R projects, by the European Regional Development Fund (ERDF), and by the Spanish National Research Council (CSIC) via the 2014-80E101 project. R. Pérez-Vega is grateful to MICINN for the FPI Fellowship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spray granulated Cu-Mn oxygen carrier for Chemical Looping with Oxygen Uncoupling (CLOU) process

  • Adánez-Rubio, Iñaki
  • Izquierdo Pantoja, María Teresa
  • Abad Secades, Alberto
  • Gayán Sanz, Pilar
  • Diego Poza, Luis F. de
  • Adánez Elorza, Juan
© 2017. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, One form of Chemical Looping Combustion (CLC) with CO2 capture as an alternative to the burning of solid fuels is the Chemical Looping with Oxygen Uncoupling (CLOU) process. The CLOU process requires metal oxides with O2 release capacity at temperatures that are suitable for solid fuel combustion, e.g. copper and manganese oxides. A Cu-Mn mixed oxide comprising 34 wt% CuO and 66 wt% Mn3O4 and prepared by fluidized bed granulation was analysed for use as an oxygen carrier for the CLOU process. TGA and batch fluidized bed reactors were used to investigate oxygen generation rates, agglomeration behaviour and oxygen carrier attrition. A medium volatile coal from South Africa and its char were used as fuel in a batch fluidized bed reactor in a temperature range of 800–930 °C. The Cu-Mn oxygen carrier showed good release O2 rate and a high rate of oxygen transfer by direct gas-solid reaction. The presence of CO as a combustion product appeared only at low oxygen carrier to coal ratios. This material has the capacity to generate O2 at lower temperatures than needed for Cu-based oxygen carriers, which suggests that this material is suitable for work at lower temperatures in a fuel reactor with complete combustion of the fuel. The low attrition rate and attrition index, together with the stable crushing strength of the particles with redox cycles, make this Cu-Mn oxygen carrier suitable for operation in a continuous CLOU unit., This work was supported by the Spanish Ministry of Economy, Industry and Competitiveness via the Projects ENE2013-45454-R, ENE2014-56857-R and ENE2016-77982-R and the European Union FEDER funds., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Comparative evaluation of the performance of coal combustion in 0.5 and 50 kWth Chemical Looping Combustion units with ilmenite, redmud or iron ore as oxygen carrier.

  • Abad Secades, Alberto
  • Mendiara, Teresa
  • Gayán Sanz, Pilar
  • García Labiano, Francisco
  • Diego Poza, Luis F. de
  • Bueno, José A.
  • Pérez-Vega, Raúl
  • Adánez Elorza, Juan
13 figures, 2 tables.-- Work presented at the 13th International Conference on Greenhouse Gas Control Technologies, GHGT-13, 14-18 November 2016, Lausanne, Switzerland, Chemical Looping Combustion (CLC) is one of the most promising technologies to achieve the CO2 capture at a low economic and energetic penalty. In CLC the combustion is split in two steps: fuel combustion assisted by an oxygen carrier in the fuel reactor, and oxygen carrier regeneration in the air reactor by oxygen in air. Usually, the air and fuel reactors are interconnected fluidized beds, with the oxygen carrier circulating between them. Thus, the CO2 capture is inherent to the CLC process. The use of solid fuels in CLC is attracting great attention due to coal is the most abundant fuel, and burning biomass with CO2 capture would allow to reduce the atmospheric CO2 concentration. The in situ Gasification CLC (iG-CLC) allows the conversion of the solid fuel by performing both gasification and combustion of gasification products in the fuel reactor. In iG-CLC complete combustion is not reached, and an oxygen polishing step is required downstream by using a small fraction of pure oxygen., The authors thank the Spanish Ministry of Economy and Competitiveness (MINECO) for the funding received from the ENE2013-45454-R and ENE 2014-56857-R projects, as well as the European Regional Development Fund (ERDF)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Combustion and reforming of liquid fossil fuels through chemical looping processes: integration of chemical looping processes in a refinery

  • García Labiano, Francisco
  • Diego Poza, Luis F. de
  • García-Díez, Enrique
  • Serrano Oliván, Anabel
  • Abad Secades, Alberto
  • Gayán Sanz, Pilar
  • Adánez Elorza, Juan
8 Figures, 2 Tables.-- Work presented at the 13th International Conference on Greenhouse Gas Control Technologies, GHGT-13, 14-18 November 2016, Lausanne, Switzerland., Oil refining processes demand and use vast quantities of energy and thus are responsible for the emission of a great deal of CO2. In addition, hydrogen is used in oil refineries for hydrodesulfurization and hydrocraking processes. In this sense, the integration of Chemical Looping technology in an oil refinery using vacuum residues as fuel could drive to significant reductions in CO2 emissions. In this work, Chemical Looping Combustion (CLC) and Chemical Looping Reforming (CLR) experiments have been carried out in a continuously operated 1 kWth unit using a Cu- and Ni-based oxygen carrier, respectively. Diesel, synthetic and mineral lubricant oil were used as fuels as a previous step to the use of low grade residues. Regarding Chemical Looping Combustion conditions, almost 100% of combustion efficiency and full carbon capture were obtained at low oxygen carrier-to-fuel molar ratios (ϕ≥1.6). Regarding Chemical Looping Reforming conditions, a syngas containing a H2 concentration over 50 vol.% in dry basis was obtained with the additional advantage of reaching 100% CO2 capture efficiency in the process. In all cases, syngas composition obtained was close to the given by the thermodynamic equilibrium. These results provide a basis for concluding that the integration of Chemical Looping processes for heat/steam and hydrogen production in an oil refinery is feasible and could lead to significant environmental advantages., This work was partially supported by the Spanish Ministry for Science and Innovation (MICINN, project ENE2011-26354, ENE2014-56857-R), European Regional Development Fund (ERDF) and by the Government of Aragón (Spain, DGA ref. T06). A. Serrano also thanks the Spanish Ministry of Economy and Competitiveness for the F.P.I. fellowship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Chemical Looping Combustion of biomass: an approach to BECCS

  • Mendiara, Teresa
  • Gayán Sanz, Pilar
  • García Labiano, Francisco
  • Diego Poza, Luis F. de
  • Pérez-Astray, Antón
  • Izquierdo Pantoja, María Teresa
  • Abad Secades, Alberto
  • Adánez Elorza, Juan
Work presented at the 13th International Conference on Greenhouse Gas Control Technologies (GHGT), Lausanne, Switzerland, Nov. 14-18, 2016, The climate change challenge demands a commitment of combined strategies between global institutions, governments, companies and citizens. In order to reach 2015 Paris Agreement, greenhouse gas emissions need to be reduced. Any single technology is currently able to achieve atmospheric greenhouse concentration values for the purpose of climate change mitigation. Also carbon sinks will be needed to further this cause as well as Carbon Capture and Storage (CCS) technologies. In this sense, biomass represents an interesting alternative fuel for heat and power production as a carbon dioxide-neutral fuel. Moreover, if the CO2 generated during biomass combustion process was captured then negative-CO2 emissions would be reached. In this way, Bio-Energy with Carbon Capture and Storage (BECCS) technologies enable energy generation while CO2 is being removed from the atmosphere., Among the different options, Chemical Looping Combustion (CLC) is considered one of the most promising second generation CCS technologies due to its negligible energy and cost penalty for CO2 capture. In this work, three types of biomass were evaluated under CLC conditions: pine sawdust, olive stone and almond shell. Combustion experiments were performed in a continuous 500 Wth CLC unit at Instituto de Carboquímica (ICB-CSIC, Spain) using a highly-reactive low-cost iron ore as oxygen carrier (Tierga ore). During the experimental campaign, the effect of fuel reactor temperature (900-980 °C) on the combustion performance was analyzed. At the highest temperature tested (980 °C) a CO2 capture efficiency of 100% was reached with all the biomasses. However, the total oxygen demand followed no clear trend with temperature and the average value was close to 25%. The high volatile content of biomass compared to coal contributed to this effect. For a correct operation with biomass, further design measures should be taken to reduce the amount of unburned compounds at the outlet of the fuel reactor. In addition, tar and NOx measurements were done. No relevant drawbacks by the use of biomass in CLC were found related with other pollutants present in the system such as tar production or NOx emissions., The authors thank the Spanish Ministry of Economy and Competitiveness (MINECO) for the funding received from the project ENE2014-56857-R) and by the European Regional Development Fund (ERDF) for the financial support. T. Mendiara thanks for the ‘‘Ramón y Cajal’’ post-doctoral contract awarded by MINECO. A. Pérez-Astray thanks MINECO for the FPI fellowship co-financed by the European Social Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chemical Looping Combustion of biomass: CLOU experiments with a Cu-Mn mixed oxide

  • Adánez-Rubio, Iñaki
  • Pérez-Astray, Antón
  • Mendiara, Teresa
  • Izquierdo Pantoja, María Teresa
  • Abad Secades, Alberto
  • Gayán Sanz, Pilar
  • Diego Poza, Luis F. de
© 2018. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Chemical looping combustion (CLC) is a low-cost CO2 capture technology with a low energy penalty. Bio-energy with CO2 capture and storage (BECCS) opens up the possibility for negative CO2 emissions involving the removal of CO2 already emitted into the atmosphere. The oxygen needed for combustion in CLC processes is supplied by a solid oxygen carrier circulating between the fuel reactor and the air reactor. In this work, the combustion of different types of biomass, such as pine sawdust, olive stones and almond shells, was studied in a continuous 1.5 kWth CLC unit. A mixed Cu-Mn oxide was used as the oxygen carrier. This material releases gaseous oxygen when reduced, resulting in Chemical looping combustion with oxygen uncoupling (CLOU). The released oxygen reacts with both the volatiles and char generated inside the fuel reactor when biomass is fed into it. The oxygen carrier is reoxidized in air inside the air reactor. High CO2 capture and 100% combustion efficiencies were achieved with this Cu-Mn oxygen carrier. The oxygen concentration inside the air reactor did not affect CO2 capture efficiency under the studied conditions., This work was supported by the Spanish Ministry of Economy and Competitiveness (MINECO Project: ENE2014-56857-R) and European Regional Development Fund (ERDF) funds. T. Mendiara is grateful for the ‘‘Ramón y Cajal’’ post-doctoral contract awarded by MINECO. I. Adánez-Rubio acknowledges the MINECO and University of Zaragoza (UZ) for the post-doctoral grant awarded (FJCI-2015-23862). A. Pérez-Astray thanks MINECO for the BES-2015-074651 pre-doctoral fellowship co-financed by the European Social Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chemical Looping Combustion of gaseous and solid fuels with manganese-iron mixed oxide as oxygen carrier

  • Pérez-Vega, Raúl
  • Abad Secades, Alberto
  • García Labiano, Francisco
  • Gayán Sanz, Pilar
  • Diego Poza, Luis F. de
  • Izquierdo Pantoja, María Teresa
  • Adánez Elorza, Juan
© 2018. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Synthetic manganese-iron mixed oxides are considered promising materials to be used as oxygen carriers for Chemical Looping Combustion of coal with carbon dioxide capture at low cost. The aim of this work was to evaluate a manganese-iron mixed oxide material with a manganese to iron molar ratio of 0.77:0.23 as oxygen carrier for coal combustion by means of chemical looping processes, including both ex-situ and in-situ gasification of coal. The preparation method -spray drying followed by calcination- was optimized in order to produce particles with high reactivity and mechanical strength. The material was studied in two continuously operated facilities designed to burn either gaseous or solid fuels. While full combustion was achieved burning syngas, showing the feasibility of the use of this material considering the ex-situ gasification process. Coal combustion efficiency by in-situ gasification process was improved in comparison with other previously tested low-cost materials such as ilmenite and iron ore. Moreover, the oxygen carrier particles showed an interesting magnetic behavior that was able to facilitate oxygen carrier recovery from the purge ash stream. In view of these results, the manganese-iron mixed oxide as oxygen carrier is proposed as a promising candidate for use coal combustion by the chemical looping process., This work was partially supported by the Spanish Ministry for Economy, Industry and Competitiveness (MINECO Projects: ENE2014-56857-R and ENE2016-77982-R projects), by the European Regional Development Fund (ERDF) and by the Spanish National Research Council (CSIC) via the 2015-80E100 and 2017-80E035 projects. The authors also thank Ing. Konrad Holscher from “Mina Invierno” (Chile) for providing the subbituminous coal used in this work., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Assessment of the improvement of chemical looping combustion of coal by using a manganese ore as oxygen carrier

  • Abad Secades, Alberto
  • Gayán Sanz, Pilar
  • Mendiara, Teresa
  • Bueno, José A.
  • García Labiano, Francisco
  • Diego Poza, Luis F. de
  • Adánez Elorza, Juan
© 2018. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Finding suitable low-cost materials to be used as oxygen carrier in Chemical Looping Combustion (CLC) of coal is a key issue to achieve the CO2 capture at low economic cost. Recently, a Mn-ore from Gabon has been identified as an alternative to the state of the art of oxygen carriers based on minerals or wastes with high iron content. This Mn-ore showed a high reactivity and a long particle lifetime during batch characterization to be considered as a suitable oxygen carrier. To evaluate the potential of this material in CLC, this work analyses the behaviour of the Mn-ore during continuous combustion of a bituminous coal in a 0.5 kWth CLC unit. The CLC process was evaluated and the effect of the main operating variables - such as fluidizing medium, oxygen carrier circulation rate, temperature, and solids inventory in the fuel reactor - on the combustion efficiency and CO2 capture was investigated. A direct relation between the char conversion rate and the CO2 capture is given, being mainly affected by the mean residence time of solids and temperature in the fuel reactor. The use of a carbon separation system with separation efficiency above 90% would be required to achieve CO2 capture rates higher than 95%. Total oxygen demand values as low as 4.5% were found when optimal operating conditions were selected, mainly being related to oxygen carrier to fuel ration higher than ϕ > 3. At these conditions, the Mn-ore material showed similar combustion efficiencies than other Fe-based low-cost materials previously tested, but with higher CO2 capture rates., This work was partially supported by the Ministry of Economy, Industry and Competitiveness via ENE2014-56857-R, ENE2016-77982-R and CSIC-2017-80E035 projects, and the European Regional Development Fund (ERDF). J.A. Bueno thanks for the FPI Fellowship. T. Mendiara thanks for the ‘‘Ramón y Cajal’’ post-doctoral contract., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chemical looping with oxygen uncoupling: an advanced biomass combustion technology to avoid CO2 emissions

  • Adánez-Rubio, Iñaki
  • Pérez-Astray, Antón
  • Abad Secades, Alberto
  • Gayán Sanz, Pilar
  • Diego Poza, Luis F. de
  • Adánez Elorza, Juan
6 Figuras.- 3 Tablas.-"This is a post-peer-review, pre-copyedit version of an article published in Mitigation and Adaptation Strategies for Global Change. The final authenticated version is available online at: http://dx.doi.org/10.1007/s11027-019-9840-5".-Título del post-print: Biomass combustion by Chemical Looping with Oxygen Uncoupling process: experiments with Cu-based and Cu-Mn mixed oxide as oxygen carriers., Bioenergy with carbon dioxide (CO2) capture and storage (BECCS) technologies represent an interesting option to reach negative carbon emissions, which implies the removal of CO2 already emitted to the atmosphere. Chemical looping combustion (CLC) with biomass can be considered as a promising BECCS technology since CLC has low cost and energy penalty. In CLC, the oxygen needed for combustion is supplied by a solid oxygen carrier circulating between the fuel and air reactors. In the fuel reactor, the fuel is oxidized producing a CO2-concentrated stream while the oxygen carrier is reduced. In the air reactor, the oxygen carrier is regenerated with air. Chemical looping with oxygen uncoupling (CLOU) is a CLC technology that allows the combustion of solid fuels as in common combustion with air by means of an oxygen carrier that release gaseous oxygen in the fuel reactor. In the last years, several Cu-based, Mn-based, and mixed oxide oxygen (O2) carriers have been tested showing good CLOU properties. Among them, copper (Cu)-based and Cu-Manganese (Mn) mixed oxides showed high reactivity, O2 release rate, and high O2 equilibrium concentration. The aim of this work is to study the viability of biomass combustion by CLOU process. The combustion of three types of biomass (pine sawdust, olive stone, and almond shell) were studied in a continuous 1.5 kWth CLC unit. Two O2 carriers were tested: a Cu-based oxygen carrier with Magnesium, Aluminum, Oxgen (MgAl2O4) as an inert prepared by spray drying (Cu60MgAl) and a mixed Cu-Mn oxide prepared by spray granulation (Cu34Mn66). These materials are capable of releasing gaseous oxygen when they are reduced in a different range of temperatures. CO2 capture and combustion efficiency were evaluated. Two fuel reactor operation temperatures were used: 775–850 °C for Cu34Mn66 and 900–935 °C for Cu60MgAl. High CO2 capture efficiencies and 100% combustion efficiency were reached with both oxygen carriers and with all the biomasses tested. Therefore, the CLOU technology with the Cu- and Cu-Mn-based oxygen carriers allowed avoiding CO2 emissions maintaining high combustion efficiencies. Results obtained demonstrate that this innovative biomass combustion technology combined with carbon storage lets an efficient BECCS process implementation., I. Adánez-Rubio acknowledges the MINECO and Universidad de Zaragoza (UZ) for the post-doctoral contract awarded (FJCI-2015-23862). A. Pérez-Astray thanks MINECO for the BES-2015-074651 pre-doctoral fellowship co-financed by the European Social Fund.This work was financially supported by the Spanish Ministry of Economy and Competitiveness (MINECO Project: ENE2014-56857-R) and the European Union ERDF funds., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Improving the efficiency of Chemical Looping Combustion with coal by using ring-type internals in the fuel reactor

  • Pérez-Vega, Raúl
  • Abad Secades, Alberto
  • Bueno, José A.
  • García Labiano, Francisco
  • Gayán Sanz, Pilar
  • Diego Poza, Luis F. de
  • Adánez Elorza, Juan
7 Figures, 5 Tables.-- © 2019. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Chemical Looping Combustion (CLC) with solid fuels has been widely developed by using two interconnected fluidized beds, the fuel reactor and the air reactor, with an oxygen carrier continuously circulating between them. Experience gained in this process shows that high CO2 capture values can be reached. However, complete combustion of the fuel is not achieved, with some H2, CO and CH4 as the main unconverted compounds in the combustion products from the fuel reactor. It is believed that the combustion efficiency can be increased by improving the gas-solid contact in the fuel reactor. In this work, the solids distribution in the fuel reactor was modified by using ring-type internals with the objective of enhancing the gas-solid contact. Two experimental campaigns were carried out in a 50 kWth CLC unit burning a bituminous coal with ilmenite particles in the temperature interval of 900–1000 °C. The first campaign was conducted with the original riser of the fuel reactor, which was characterized by a smooth section from bottom to top. For the second campaign, three ring-type internals were implemented in the riser in order to modify the solids distribution in the fuel reactor. The presence of the internals had a beneficial effect on the coal combustion. The major benefit was an improved oxidation of volatile matter in the form of CH4 and the full conversion of H2. As a result, the total oxygen demand decreased by 20%, from 12.2% to 9.8%, with the implementation of the internals., This work was supported by the Ministerio de Economía, Industria y Competitividad (projects ENE2014-56857-R and ENE2016-77982-R), the Spanish National Research Council (CSIC project: 2017-80E035), the Research Fund for Coal and Steel (RFCS project ACCLAIM: RFCP-CT-2012-00006) and the European Regional Development Fund (ERDF)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Evaluation of Mn-Fe mixed oxide doped with TiO2 for the combustion with CO2 capture by Chemical Looping assisted by Oxygen Uncoupling

  • Pérez-Vega, Raúl
  • Abad Secades, Alberto
  • Izquierdo Pantoja, María Teresa
  • Gayán Sanz, Pilar
  • Diego Poza, Luis F. de
  • Adánez Elorza, Juan
11 Figures, 2 Tables.-- © 2019. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Bimetallic manganese-iron materials have been identified as suitable oxygen carriers for Chemical Looping Combustion (CLC) and Chemical Looping with Oxygen Uncoupling (CLOU) processes. These materials allow the combustion of a fuel with inherent CO2 capture according to two parallel mechanisms: reaction with lattice oxygen and oxygen uncoupling. This work is focused on the evaluation of the reactivity and physicochemical characterization of oxygen carrier particles consisting of a manganese-iron mixed oxide with manganese to iron molar ratio of 66:34 and doped with titanium (7 wt% TiO2) with the objective of determining suitable conditions to be used in CLC and CLOU processes. Particles were prepared by spray drying and the sintering procedure was optimized in order to achieve particles with high reactivity and mechanical strength. In addition, suitable magnetic properties were also sought in order to allow oxygen carrier recover and reuse in a chemical looping unit burning solid fuels. Optimum operating conditions for the fuel combustion and regeneration stages were determined in order to promote the oxygen uncoupling mechanism. Thus, temperature during the fuel combustion must be as high as possible to enhance the oxygen transference; but conditions for oxygen carrier regeneration by air must be carefully selected in order to take advantage of the oxygen uncoupling capability of this material. An oxidizing temperature interval of 1123–1173 K maximized the regeneration, while an air excess higher than 20% would be recommended in order to guarantee oxygen uncoupling capability., This work was partially supported by the Spanish Ministry for Economy, Industry and Competitiveness (MINECO Projects: ENE2014-56857-R and ENE2016-77982-R projects), by the European Regional Development Fund (ERDF), and by the Spanish National Research Council (CSIC) via the 2017-80E035 project., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A simple model for comparative evaluation of different oxygen carriers and solid fuels in iG-CLC processes

  • Abad Secades, Alberto
  • Mendiara, Teresa
  • Diego Poza, Luis F. de
  • García Labiano, Francisco
  • Gayán Sanz, Pilar
  • Adánez Elorza, Juan
5 Tables, 8 Figures.-- © 2018. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, A simple model based on oxygen carrier kinetics has been developed for the in situ Gasification Chemical Looping Combustion (iG-CLC) process. Once the kinetic parameters for different oxygen carriers and solid fuels are known, the model allows easy and fast comparison of different oxygen carrier-solid fuel pairs, which is the main purpose of the model here presented. The comparison is based on the estimation of the CO2 capture efficiency value (ηCC) and the total oxygen demand (ΩT) as evaluating parameters. To show the proposed procedure for the comparison, two Fe-based oxygen carriers (ilmenite and Tierga ore), and five different types of solid fuels: anthracite (Yangquan), sub-bituminous (Tremedal), two bituminous coals (Cerrejón and Taldinsky) and one biomass (olive tree pruning) have been considered. The comparison of the calculated CO2 capture efficiency and total oxygen demand must be done including the effect of operating conditions such as temperature and solids circulation rate. A set of optimized operating conditions are given as a reference for future evaluations of different oxygen carrier-solid fuel pairs. This method is thought as a useful tool for a preliminary evaluation of new oxygen carriers for iG-CLC with different solid fuels., This work was supported by the Spanish Ministry of Economy and Competitiveness (projects ENE2014-56857-R, ENE2016-77982-R), by the European Regional Development Fund (ERDF), the EU project ACCLAIM (RFCP-CT-2012-00006). T. Mendiara thanks for the “Ramón y Cajal” post-doctoral contract awarded by the Spanish Ministry of Economy and Competitiveness. The authors also thank PROMINDSA for providing the iron ore used in this work., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Negative CO2 emissions through the use of biofuels in chemical looping technology: A review

  • Mendiara, Teresa
  • García Labiano, Francisco
  • Abad Secades, Alberto
  • Gayán Sanz, Pilar
  • Diego Poza, Luis F. de
  • Izquierdo Pantoja, María Teresa
  • Adánez Elorza, Juan
15 Figures, 11 Tables.-- © 2018. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, In order to limit the increase in the global average temperature to 2 °C or below, the Paris Agreement proposed the reduction of CO2 emissions throughout this century. Bioenergy with CO2 capture and storage (BECCS) technologies represent an interesting option in order to allow this goal to be metgoal, because they are able to achieve negative CO2 emissions. Chemical looping (CL) is recognized as one of the most innovative CO2 capture technologies owing to its low energy penalty. CL processes permit the utilization of renewable fuels in a nitrogen-free atmosphere, given that the required oxygen is supplied by solid oxygen carriers. The present work presents an overview of the status of development of the use of biofuels in chemical looping technologies, including chemical looping combustion (CLC) and chemical looping with oxygen uncoupling (CLOU) for the production of heat/electricity, as well as chemical looping reforming (CLR), chemical looping gasification (CLG) and chemical looping coupled with water splitting (CLWS) for syngas/H2 generation. The main milestones in the development of such processes are shown, and the future trends and opportunities for CL technology with biofuels are discussed., This work was supported by the Spanish Ministry of Economy, Industry and Competitiveness (projects ENE2014-56857-R, ENE2016-77982-R, and ENE2017-89473-R), the European Regional Development Fund (ERDF), the Spanish National Research Council -CSIC- (201780E035) and the Regional Government of Aragón (T05_17R). T. Mendiara is grateful for the “Ramón y Cajal” post-doctoral contract awarded by MINEICO., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reduction and oxidation kinetics of Tierga iron ore for Chemical Looping Combustion with diverse fuels

  • Mendiara, Teresa
  • Abad Secades, Alberto
  • Diego Poza, Luis F. de
  • García Labiano, Francisco
  • Gayán Sanz, Pilar
  • Adánez Elorza, Juan
11 Figures, 4 Tables.-- © 2018. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, The in-situ Gasification Chemical Looping Combustion (iG-CLC) process allows combustion with inherent CO2 capture. In this process, the oxygen for combustion is commonly supplied by a solid oxygen carrier based on a metal oxide thus avoiding direct contact between fuel and air. The oxygen carrier circulates between two reactors. In the fuel reactor, the fuel is oxidized to CO2 and H2O while the oxygen carrier is reduced. In the air reactor, the reduced oxygen carrier is regenerated in air. Ilmenite has been widely used as a low-cost oxygen carrier for the iG-CLC process, and it can be taken as a reference material. Recently, the Tierga iron ore has been identified as a promising candidate for further scale-up of the process due to the higher combustion efficiency achieved compared to the results using ilmenite. Modelling of the iG-CLC process with Tierga iron ore as oxygen carrier is a key step to determine the potential of this material. In order to model the iG-CLC process it is necessary to know the reactivity of both oxygen carrier and fuel used. In this paper, the kinetic determination for the reduction and oxidation reactions of the Tierga ore is presented. Reaction orders close to unity were obtained for the main reducing gases, i.e. H2, CO and CH4, as well as O2. The activation energy values obtained were 81.1 ± 7, 76.1 ± 6 and 257 ± 14 kJ/mol for H2, CO and CH4, respectively. The activation energy for oxidation was determined as 18.4 ± 0.5 kJ/mol. In addition, a simple method is used for a comparison of the performance of different oxygen carriers based on their kinetics., This work was supported by the Spanish Ministry of Economy and Competitiveness (projects ENE2014-56857-R, ENE2016-77982-R), by the European Regional Development Fund (ERDF), the EU project ACCLAIM (RFCP-CT-2012-00006). T. Mendiara thanks for the ‘‘Ramón y Cajal’’ post-doctoral contract awarded by the Spanish Ministry of Economy and Competitiveness. The authors also thank PROMINDSA for providing the iron ore used in this work., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chemical Looping Combustion of different types of biomass in a 0.5 kWth unit

  • Mendiara, Teresa
  • Pérez-Astray, Antón
  • Izquierdo Pantoja, María Teresa
  • Abad Secades, Alberto
  • Diego Poza, Luis F. de
  • García Labiano, Francisco
  • Gayán Sanz, Pilar
  • Adánez Elorza, Juan
8 Figures, 3 Tablas.-- © 2017. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Chemical Looping Combustion (CLC) using renewable solid fuels appears as an important option to reach negative carbon emissions. In this work, three types of forest and agricultural residues (pine sawdust, olive stone and almond shell) were tested between 900–980 °C in a 0.5 kWth unit with an iron ore as oxygen carrier (Tierga ore) working under In situ Gasification-Chemical Looping Combustion (iG-CLC) mode. Specific solids inventories lower than 1000 kg/MWth were tested as they were consider more representative of what can be used in a larger CLC unit. CO2 represented about 70% in the fuel reactor outlet gas stream, followed by unburnt compounds: H2, CO and CH4. CO2 capture efficiencies increased with the fuel reactor temperature achieving almost 100% of capture with the three biomasses at temperatures above 950 °C. In contrast, no clear trend with the fuel reactor temperature was observed for the total oxygen demand, achieving values about 25%. The major contribution to this value comes from the unburned volatiles with a small contribution coming from tar (≈ 1%). Regarding tar, naphthalene was the major compound found at the different operating conditions. The present results support the consideration of the CLC process with biomass (bio-CLC) as a promising Bio-Energy with Carbon Capture (BECCS) technology., The authors thank the Spanish Ministry of Economy and Competitiveness (MINECO) for the funding received from the project ENE2014-56857-R) and FEDER for the financial support. A. Pérez-Astray thanks MINECO for the BES-2015-074651 predoctoral fellowship co-financed by the European Social Fund. T. Mendiara thanks for the ‘‘Ramón y Cajal’’ post-doctoral contract awarded by MINECO. The authors also thank PROMINDSA for providing the solid material used in this work., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mn-based oxygen carriers prepared by impregnation for Chemical Looping Combustion with diverse fuels

  • Costa, T. R.
  • Gayán Sanz, Pilar
  • Abad Secades, Alberto
  • García Labiano, Francisco
  • Diego Poza, Luis F. de
  • Melo, Dulce M. A.
  • Adánez Elorza, Juan
13 Figures, 4 Tables.-- © 2018. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Chemical Looping Combustion (CLC) is considered one of the low cost alternatives for CO2 capture for fossil fuels combustion and to reach negative emissions through biomass CLC. The cornerstone of the CLC process is the oxygen carrier performance that represents the main additional cost with respect to the conventional combustion. Manganese-based oxygen carriers are subjected to a growing interest because they are low cost, not toxic and environmentally friendly. In this work five impregnated oxygen carriers, with manganese oxide Mn3O4 or Mg6MnO8 as their active phase and three commercial supports based on zirconia and synthetic calcium aluminate, were prepared. Their behaviour for CLC was examined by TGA, batch fluidized bed reactor, TPR, SEM-EDX and XRD. After a preliminary screening two carriers (Mn-ZrM and Mn-ZrSG) were subjected to multiple redox cycles by TGA and batch fluidized bed reactor. Both showed high solids conversion by TGA under the tested conditions, appropriated resistance to fracture, rate indexes relatively high, although Mn-ZrM showed agglomeration and deactivation during batch fluidized bed tests. Reactivity in batch fluidized bed reactor of the Mn-ZrSG oxygen carrier with methane increases with temperature although suffered from significant deactivation. This was different to the results found during multiple redox cycles by TGA. There was not a clear reason for this decrease in the reactivity that likely could be due to the uncomplete oxidation in the batch fluidized bed reactor, although further investigations are needed. On the other hand, it presented high and constant reactivity with CO and H2 in all the range of temperatures tested, being suitable for iG-CLC processes of coal or biomass and syngas combustion. Agglomeration problems were not found and the attrition losses were small. Calculated lifetime was around 11,000 h, much higher than any other Mn-based material developed or tested for CLC., This work was partially supported by the Spanish Ministry of Economy and Competitiveness via ENE2014‐56857‐R and ENE2016‐77982‐R, by the European Regional Development Fund (ERDF). The authors thanks to CNPq for the funding received by the Project 405792/2013‐1 and T. Costa thanks to CNPq for the grant SWE 200354/2014‐0., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chemical looping combustion of solid fuels

  • Adánez Elorza, Juan
  • Abad Secades, Alberto
  • Mendiara, Teresa
  • Gayán Sanz, Pilar
  • Diego Poza, Luis F. de
  • García Labiano, Francisco
47 Figuras,11 Tablas.-- Título del postprint: Review and assessment of experimental results from Chemical Looping Combustion units burning solid fuels.-- © 2017. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Chemical Looping Combustion (CLC) has arisen during last years as a very promising combustion technology for power plants and industrial applications, with inherent CO2 capture which reduces the energy penalty imposed on other competing technologies. The use of solid fuels in CLC has been highly developed in the last decade and currently stands at a technical readiness level (TRL) of 6. In this paper, experience gained during CLC operation in continuous units is reviewed and appraised, focusing mainly on technical and environmental issues relating to the use of solid fuels. Up to now, more than 2700 h of operational experience has been reported in 19 pilot plants ranging from 0.5 kWth to 4 MWth. When designing a CLC unit of solid fuels, the preferred configuration for the scale-up is a two circulating fluidized beds (CFB) system. Coal has been the most commonly used solid fuel in CLC, but biomass has recently emerged as a very promising option to achieve negative emissions using bioenergy with carbon dioxide capture and storage (BECCS). Mostly low cost iron and manganese materials have been used as oxygen carriers in the so called in-situ gasification CLC (iG-CLC). The development of Chemical Looping with Oxygen Uncoupling (CLOU) makes a qualitative step forward in the solid fuel combustion, due to the use of materials able to release oxygen. The performance and environmental issues of CLC of solid fuels is evaluated here. Regarding environmental aspects, the pollutant emissions (SO2, NOx, etc.) released into the atmosphere from the air reactor are no cause of concern for the environment. However, the presence of SO2, NOx and Hg at the exit of the fuel reactor affects CO2 quality, which must be taken into account during the later compression and purification stages. The effect of the main variables affecting CLC performance is evaluated for fuel conversion, CO2 capture rate, and combustion efficiency obtained in different CLC units. Solid fuel conversion is normally not complete during operation, due to the undesired loss of char. A methodology is presented to extrapolate the current information to what could be expected in a larger CLC system. CO2 capture near 100% has been reported using a highly efficient carbon stripper, highly reactive fuels (such as lignites and biomass, etc.) or by the CLOU process. Operational experience in iG-CLC has showed that it is not possible to reach complete fuel combustion, making an additional oxygen polishing step necessary. For the further scale-up, it is essential to reduce the unburnt compounds at the fuel reactor outlet. Proposals to achieve this reduction already exist and include both improvement to the gas-oxygen carrier contact, or new design concepts based on the current scheme for iG-CLC. In addition, CLOU based on copper materials has shown that complete fuel combustion could be achieved. Main challenges for the future development and scale-up of CLC technology have been also identified. A breakthrough in the future development of CLC technology for solid fuels will come from developing long-life materials for CLOU that are easy to recover from the ash purge stream., This work was supported by the Spanish Ministry of Economy and Competitiveness (projects ENE 2013-45454-R, ENE2014-56857-R and ENE2016-77982-R), by the European Regional Development Fund (ERDF), by the CSIC (projects 2014-80E101 and 201780E035) and by the Government of Aragón (Spain, Ref. T06). T. Mendiara gives thanks for the Ramón y Cajal post-doctoral contract awarded by the Spanish Ministry of Economy and Competitiveness., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Relevance of plant design on CLC process performance using a Cu-based oxygen carrier

  • Abad Secades, Alberto
  • Gayán Sanz, Pilar
  • García Labiano, Francisco
  • Diego Poza, Luis F. de
  • Adánez Elorza, Juan
13 Figures, 4 Tables.-- © 2017. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Previously validated mathematical CLC models were used to simulate the process performance of CLC methane combustion using an impregnated Cu-based material and to analyse the effect of the fuel reactor design; being either a bubbling fluidized bed or a circulating fluidized bed. The CLC models considered both the fluid dynamic of the fluidized beds at the specific regime and the corresponding kinetics of oxygen carrier reduction. From the model outputs, the performance of the different systems was assessed by calculating the methane conversion in the fuel reactor. Main results highlights that the selection of a suitable particle size of the oxygen carrier and cross section area are key factors to achieve complete combustion with low solids inventory in the fuel reactor. In addition, the growing of bubbles should be limited in order to achieve high CH4 conversion with low solids inventory values, mainly in the bubbling regime with low cross section areas. Complete combustion was predicted with solids inventory in the fuel reactor of 250 kg/MWth (1 m2/MW and particle size of 0.25 mm) or 125 kg/MWth (0.2 m2/MW and a particle size of 0.15 mm) in the bubbling and turbulent regime, respectively. Considering the pressure drop related to these conditions, conclusions for the optimization design of a CLC unit using the Cu-based oxygen carrier are drawn based on the results of the modelling and simulation., This paper was supported by the European Commission Seventh Framework Program under the grant agreement N° 608571 (Project acronym SUCCESS), and by the Spanish Ministry of Economy, Industry and Competitiveness (MINECO Projects: ENE2014-56857-R and ENE2016-77982-R) and the European Union FEDER funds., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

CLOU process performance with a Cu-Mn oxygen carrier in the combustion of different types of coal with CO2 capture

  • Adánez-Rubio, Iñaki
  • Abad Secades, Alberto
  • Gayán Sanz, Pilar
  • Diego Poza, Luis F. de
  • Adánez Elorza, Juan
5 Figures, 3 Tables.-- © 2017. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, The Chemical Looping with Oxygen Uncoupling (CLOU) process is a Chemical Looping Combustion (CLC) technology that allows the combustion of solid fuels with inherent CO2 separation by using oxygen carriers based on metal oxides. This technology has a low energy penalty and thus low CO2 capture costs. The oxygen carrier used in the CLOU process must be able to release gaseous oxygen, an aspect that limits the availability of metal oxides for this process. This work investigated the suitability of an oxygen carrier containing 34 wt% CuO and 66 wt% Mn3O4 (active phase Cu1.5Mn1.5O4) prepared by granulation regarding the CO2 capture, combustion efficiency and lifetime of the particles. The effect of the different types of coal (two sub-bituminous and a lignite) on combustion and CO2 capture efficiencies by CLOU was studied at different oxygen carrier to coal ratios in a continuous 1.5 kWth rig. It was found that full combustion could be reached regardless of the coal used. However, CO2 capture efficiencies were highly determined by coal rank. Finally, it was found that working with oxygen carrier to coal ratios higher than ϕ = 4, which corresponded to values of the variation of the oxygen carrier conversion lower than ΔXoc = 0.25, decreased the effect of chemical stress on the attrition rate. Therefore, it is clearly beneficial for the lifetime of oxygen carrier particles to operate with low variations of the oxygen carrier conversion (ΔXoc) between fuel and air reactors., This work was supported by the Spanish Ministry of Economy, Industry and Competitiveness (MINECO Projects: ENE2013-45454-R, ENE2014-56857-R and ENE2016-77982-R) and the European Union FEDER funds., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Comparative study of fuel-N and tar evolution in chemical looping combustion of biomass under both iG-CLC and CLOU modes

  • Pérez-Astray, Antón
  • Adánez-Rubio, Iñaki
  • Mendiara, Teresa
  • Izquierdo Pantoja, María Teresa
  • Abad Secades, Alberto
  • Gayán Sanz, Pilar
  • Diego Poza, Luis F. de
  • García Labiano, Francisco
  • Adánez Elorza, Juan
8 Figures, 6 Tables.-- © 2018. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Chemical looping combustion (CLC) processes combined with CO2 sequestration and sustainable management of biomass represent a promising BioEnergy with Carbon Capture and Storage (BECCS) technology. One of the aspects to be considered in the combustion of biomass is the formation of NOx and the possible existence of tar in the gaseous product stream. The advantage of the CLC technology compared to other CO2 capture technologies is that only fuel-N contributes to nitrogen oxides formation. Moreover, scarce information is available about tar formation in CLC. Thus, this work focuses on these two aspects and compares the results obtained when two different chemical looping combustion modes are used, namely In Situ Gasification Chemical Looping Combustion (iG-CLC) and Chemical Looping with Oxygen Uncoupling (CLOU). Important differences were observed depending on the combustion mode. In both cases most of the fuel-N appeared as N2 in the fuel reactor. However, in iG-CLC more than 94% of the nitrogen measured in the fuel reactor was N2 independently of the biomass used. These percentages under the CLOU mode were lower. In this case, low amounts of N2O were also detected, although it decreased to almost zero at 850 °C. In the air reactor, NO was found and its concentration remained below the legal limit for NOx emissions in power installations with all the types of biomass tested and operating modes. Tar species and concentrations found at the fuel reactor outlet stream were different under the two combustion modes. About 2.5–3.7 g/Nm3 total tar could be found at 980 °C burning under iG-CLC mode, mostly naphthalene. On the contrary, insignificant tar amounts were found in CLOU., The authors thank the Spanish Ministry of Economy and Competitiveness (MINECO) for the funding received from the projects ENE2014-56857-R and ENE2016-77982-R as well as FEDER for the financial support. A. Pérez-Astray thanks MINECO for the BES-2015-074651 pre-doctoral fellowship co-financed by the European Social Fund. I. Adánez-Rubio acknowledges MINECO and Universidad de Zaragoza (UNIZAR) for the post-doctoral grant awarded (FJCI-2015-23862). T. Mendiara thanks for the ‘‘Ramón y Cajal’’ post-doctoral contract awarded by MINECO., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Estado actual y retos de los procesos Chemical Looping, Current status and challenges of Chemical Looping processes

  • García Labiano, Francisco
4 Figuras.- 1 Tabla, [EN] Today’s society is increasingly aware of the reality of climate change and the need to reduce greenhouse gas emissions into the atmosphere. The recent Paris Agreement aims to prevent the average temperature of the earth from rising by more than 2 °C by the end of the century. The CO2 capture and storage (CCS) is according to all forecasts one of the technologies needed to achieve this goal. In this sense, Chemical Looping is considered as one of the most promising CO2 capture technology from the economic point of view. Its great versatility allows the realization of a large number of combinations that includes both Chemical Looping Combustion (CLC) processes for heat or electricity production, and Chemical Looping Reforming, for H2 production with CO2capture or syngas production to be used in chemical applications. It also allows the use of different types of fuel including gaseous (natural gas, syngas, etc.), liquids (diesel, oils, bioethanol, etc.) or solids (coal, biomass, etc.). This paper shows the current state and main future research lines regarding Chemical Looping technology., [ES] La sociedad actual está cada vez más concienciada sobre la realidad del cambio climático y sobre la necesidad de reducir las emisiones de gases de efecto invernadero a la atmósfera. El reciente Acuerdo de París trata de impedir que la temperatura media de la tierra aumente más de 2 ºC a finales de siglo. La captura y almacenamiento de CO2 es según todas la previsiones una de las tecnologías para alcanzar dicho objetivo. En este sentido, la tecnología de Chemical Looping aplicada a la captura de CO2 se plantea como una de las más ventajosas desde el punto de vista económico. Su gran versatilidad permite la realización de un gran número de combinaciones que abarcan tanto procesos de combustión (Chemical Looping Combustion) para la producción de calor o electricidad, como de reformado (Chemical Looping Reforming), para la producción de H2 con captura de CO2 o de gas de síntesis para diferentes aplicaciones. Asimismo permite la utilización de diferentes tipos de combustibles tanto en forma de gas (gas natural, gas de síntesis, etc.), líquidos (gasóleo, aceites, bioetanol, etc.) o en forma sólida (carbón, biomasa, etc.). En este trabajo se muestra el estado actual y las principales líneas de evolución de la tecnología de Chemical Looping en los diferentes ámbitos., Este trabajo ha sido financiado por el Ministerio de Economía y Competitividad (proyecto ENE2014-56857-R), por el Fondo Europeo de Desarrollo Regional, por el CSIC (proyecto 201780E035) y por el Gobierno de Aragón (Ref. T06)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis doctoral (DoctoralThesis)

Chemical Looping Combustion of biomass with negative Co2 emissions

  • Pérez-Astray, Antón
xxi, 157 Pags.-- 76 Figuras. 17 Tablas.-- Tesis doctoral llevada a cabo para conseguir el grado de doctor en la Universidad de Zaragoza, 2020-02-13.-- Calificación Sobresaliente "cum laude"., [EN] CO2 emissions to the atmosphere became an important environmental problem because of the effect on the global warming and consequently, the climate change. The climate change challenge demands a commitment of combined strategies between global institutions, governments and citizens. To reach the objectives set in the Paris Agreement (2015), greenhouse gas emissions need to be reduced. No technology is currently able to achieve the necessary reductions in greenhouse gas emissions on its own. Biomass represents an interesting alternative fuel for heat and power production as a carbon dioxide-neutral fuel. Moreover, if the CO2 generated during biomass combustion process is captured then negative-CO2 emissions would be reached and these are named bioenergy with Carbon Capture and Storage (BECCS) technologies. Chemical Looping Combustion (CLC) came up as one of the most promising CO2 capture technologies thanks to the low energy penalty of the CO2 separation and therefore, low-cost. CLC technologies are based in two interconnected fluidized bed reactors without gas mixing. The combustion takes place in the fuel reactor where the oxygen is supplied by a solid oxygen carrier, normally metal oxides. After being reduced, the oxygen carrier goes to the air reactor without gas mixing between reactors where it is oxidized again in air, and it is able for a new redox cycle starts. The main objective of this thesis is to evaluate the biomass combustion with CLC technologies (bioCLC). The research plan covers studies different at different scales, starting at lab scale, through a 1 kWth pilot plant, to the continuous operation in a 20 kWth plant to demonstrate the viability and optimizing the operation range for different low-cost oxygen carriers and different types of biomass residues. Iron based ores as well as manganese ores has been pointed as promising oxygen carriers because of their reactivity and low cost. Under In Situ Gasification Chemical Looping Combustion (iG-CLC) mode, the performance of the process was studied focusing on the effect of different important operating variables in a 1 kWth CLC unit. Values about 100% of carbon capture efficiency with the three types of biomass were obtained using ores as oxygen carrier and the total oxygen demand was reduced because of the different reactivity of each oxygen carrier and the operating conditions optimization. Also a synthetic iron-manganese mixed able to release molecular oxygen during the CLC process was used. The effect of the several operating variables was also studied finding a high dependency on the air excess and the temperature, both in the air reactor, on the CO2 capture efficiency and the total oxygen demand. About 100% of CO2 capture efficiency achieving values of total oxygen demand about 5%. The use of a mixed Cu-Mn oxide was also studied as a Chemical Looping with Oxygen Uncoupling (CLOU) oxygen carrier. High CO2 capture efficiencies were obtained and close to null total oxygen demand was achieved. The effect of the operating conditions on the performance of CLC was evaluated in a 20 kWth CLC unit using an iron ore as oxygen carrier. A Spanish biomass residue was tested achieving values close to 100% and total oxygen demands between 15-20% despite the low temperature used, supporting the consideration of the CLC process with biomass (bioCLC) as a promising bioenergy with Carbon Capture (BECCS) technology. One of the aspects to be considered in the combustion of biomass is the formation of NOx and the possible existence of tar in the gaseous product stream. This work compares the results obtained with two different chemical looping combustion modes, iG-CLC and CLOU. All these results show the feasibility of the integration of solid biofuels with CLC technologies achieving a negative emission technology able to produce an energy gain through a BECCS technology., [ES] Las emisiones de CO2 a la atmósfera se han convertido en un importante problema ambiental debido al calentamiento global y el consecuente cambio climático. El reto del cambio climático hace necesaria la aplicación de estrategias combinadas entre instituciones, gobiernos y ciudadanos. Para alcanzar los objetivos fijados en el Acuerdo de París (2015) es necesario reducir las emisiones de gases de efecto invernadero y actualmente ninguna tecnología es capaz de alcanzar los objetivos de reducción por si sola. La biomasa representa una interesante alternativa como combustible con emisiones neutras de CO2. Así mismo, si el CO2 generado durante la combustión de biomasa es capturado para su almacenamiento, se pueden alcanzar emisiones negativas de CO2 a través de la bioenergía con captura y almacenamiento de CO2. La combustión mediante transportadores de oxígeno destaca como una de las tecnologías de captura de CO2 más prometedoras gracias a la baja penalización energética debida a la separación del CO2, y su consecuente bajo coste. La combustión mediante transportadores sólidos de oxígeno se basa en la utilización de reactores de lecho fluidizado. La combustión tiene lugar en el reactor de reducción, donde el transportador sólido de oxígeno, normalmente un óxido metálico, se reduce. Después de reducirse, el transportador de oxígeno llega al reactor de oxidación, donde se vuelve a oxidar en aire para comenzar un nuevo ciclo redox. El principal objetivo de esta tesis es evaluar el potencial de las tecnologías de combustión mediante transportadores sólidos de oxígeno con biomasa. El plan de investigación incluye estudios a diferentes escalas, comenzando a nivel de laboratorio, continuando con planta piloto de 1 kWt y finalizando con la operación en continuo de una planta de 20 kWt para demostrar la viabilidad y optimizar los rangos de operación para el uso de distintos transportadores de oxígeno. Algunos minerales basados en hierro, así como otros basados en manganeso, han sido seleccionados por su alta reactividad y bajo coste. En la planta 1 kWt se viii estudió el efecto de distintas variables de operación sobre el funcionamiento del proceso bajo In Situ Gasification Chemical Looping Combustion (iG-CLC). Se alcanzaron valores en torno al 100% de eficacia de captura de CO2 con los tres tipos de biomasa estudiados usando minerales como transportadores de oxígeno, y las demandas totales de oxígeno se redujeron mediante la sustitución del transportador de oxígeno por otros más reactivos, así como por la optimización de diferentes variables de operación. También se ha probado un óxido sintético mixto basado en hierro y manganeso con capacidad de liberar oxígeno molecular durante el proceso de combustión. En este caso se estudió también el efecto de distintas variables de operación sobre la eficacia de captura de CO2 y la demanda total de oxígeno, encontrando una gran dependencia tanto de la temperatura como del exceso de aire, ambos en el reactor de oxidación. Se alcanzaron valores en torno al 100% de eficacia de captura de CO2 con demandas totales de oxígeno alrededor del 5%. El uso de un óxido mixto basado en cobre y manganeso ha sido estudiado también bajo el proceso conocido como Chemical Looping with Oxygen Uncoupling (CLOU). En este caso se alcanzaron altos valores de eficacia de captura de CO2 y demandas totales de oxígeno próximas a cero. En la planta de 20 kWt, se estudió el efecto de diferentes variables de operación utilizando un mineral de hierro como transportador de oxígeno. En esta planta se alcanzaron valores de demanda próximas al 100% y demandas totales de oxígeno en torno al 15-20% pese a las bajas temperaturas usadas. Otros de los aspectos a ser considerados en la combustión de biomasa es la formación de NOx y la posible presencia de alquitranes en la corriente gaseosa de salida. En este trabajo se comparan los resultados obtenidos mediante dos modos de operación, iG-CLC y CLOU. Todos estos resultados muestran las posibilidades de integración de biocombustibles sólidos con las tecnologías de combustión mediante transportadores de oxígeno consiguiendo una tecnología de emisiones negativas de CO2, capaz de producir un beneficio energético., The author thanks the Spanish Ministry of Economy and Competitiveness (MINECO) for the funding received from the projects ENE2014-56857-R and ENE2017-89473-R AEI/FEDER UE for the financial support. A. Pérez-Astray thanks MINECO for the BES-2015-074651 pre-doctoral fellowship co-financed by the European Social Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Biomass combustion with CO2 capture in a 20 kWth CLC plant

  • Pérez-Astray, Antón
  • Pérez-Vega, Raúl
  • Mendiara, Teresa
  • Diego Poza, Luis F. de
  • Abad Secades, Alberto
  • García Labiano, Francisco
  • Gayán Sanz, Pilar
  • Izquierdo Pantoja, María Teresa
  • Adánez Elorza, Juan
Presentado en las XXXVI Jornadas Nacionales de Ingeniería Química, JNIQ 2019, Zaragoza, 4-6 Sep. 2019., Bioenergy with Carbon Capture and Storage (BECCS) represents an interesting option to achieve the negative CO2 emissions needed to comply with the climate challenges set in the Paris Agreement (COP21-2015). Chemical Looping Combustion (CLC) technology has revealed as one of the CO2 capture technologies with less energy penalty and lower cost. CLC combined with biomass could become a promising BECCS technology. The objective of this work was to asses the feasibility of the CLC technology using biomass as fuel as a future BECCS technology., This work was supported by the Spanish Ministry of Economy and Competitiveness (MINECO Projects: ENE2014-56857-R, ENE2016-77982-R and ENE2017-89473-R) and European Regional Development Fund (ERDF). A. Pérez-Astray thanks MINECO for the BES-2015-074651 co-financed by the European Social Fund. T. Mendiara thanks for the “Ramón y Cajal” post-doctoral contract., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Combustión de biomasa sin emisión de CO2 en una planta de 20 kW

  • Pérez-Astray, Antón
  • Pérez-Vega, Raúl
  • Mendiara, Teresa
  • Diego Poza, Luis F. de
  • Abad Secades, Alberto
  • García Labiano, Francisco
  • Gayán Sanz, Pilar
  • Izquierdo Pantoja, María Teresa
  • Adánez Elorza, Juan
1 Figura, 2 Tablas.-- Presentado en las XXXVI Jornadas Nacionales de Ingeniería Química, JNIQ 2019, Zaragoza, 4-6 Sep. 2019., El Acuerdo de París fijó el objetivo de limitar en 2 ºC el incremento de temperatura media global sobre los valores preindustriales. Para tal efecto, el IPCC señala a la bioenergía con captura y almacenamiento de CO2 (BECCS en inglés) como una de las tecnologías clave para reducir el impacto del cambio climático pudiendo alcanzarse emisiones negativas de CO2. La implementación de biocombustibles en las tecnologías tradicionales de captura de CO2 implica un alto coste energético del combustible obteniendo una corriente de CO2 prácticamente puro con uno de los menores costes energéticos asociados. El proceso se basa en la utilización de un transportador de oxígeno (TO), normalmente un óxido metálico, que al transportar el oxígeno del reactor de oxidación al de reducción, evita la mezcla del oxígeno del aire y los gases de combustión, evitando de este modo la aplicación de un proceso de separación de gases. En este trabajo se evaluó en una planta piloto de 20 kW de potencia, el efecto de las principales variables de operación bajo condiciones de In situ Gasification-CLC como son la circulación de sólidos, el tipo de agente gasificante y el inventario específico de sólidos en el reactor de reducción sobre los principales parámetros de rendimiento del proceso como son la eficacia de captura de CO2 y la demanda total de oxígeno., Trabajo financiado por el MINECO (ENE2014-56857-R, ENE2016-77982-R, ENE2017-89473-R) y por FEDER. A. Pérez-Astray agradece la beca predoctoral BES-2015-074651., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Evaluation of different strategies to improve the efficiency of coal conversion in a 50 kWth Chemical Looping combustion unit

  • Abad Secades, Alberto
  • Gayán Sanz, Pilar
  • Pérez-Vega, Raúl
  • García Labiano, Francisco
  • Diego Poza, Luis F. de
  • Mendiara, Teresa
  • Izquierdo Pantoja, María Teresa
  • Adánez Elorza, Juan
6 Figures, 3 Tables.-- © 2020. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Minerals or industrial waste materials are considered promising oxygen carriers for coal combustion through in-situ Gasification Chemical Looping Combustion (iG-CLC) process in order to maintain CO2 capture at low cost. Nevertheless, complete coal combustion to CO2 and H2O is usually not achieved and different solutions have been outlined to improve it. The aim of this work is to analyze the potential of two of these strategies: (1) using a more reactive oxygen carrier; and (2) to have two fuel reactors by feeding the coal into the carbon stripper. Coal combustion in a 50 kWth CLC unit was carried out using two oxygen carrier materials, namely Norwegian ilmenite and Tierga iron-ore. Also, an additional test was carried out feeding the coal directly into the carbon stripper of the CLC unit, in contrast with the conventional coal feeding to the fuel reactor. CO2 capture efficiency was barely affected by the type of oxygen carrier material, but slightly lower values were obtained when coal was fed to the carbon stripper. In contrast, coal combustion efficiency was enhanced by using the iron-ore material, with a potential decrease of the total oxygen demand of 40%, achieving a minimum value of total oxygen demand of 4.1%. Also, the total oxygen demand was decreased by 24% when coal was fed to the carbon stripper due to the improvement in the combustion of the volatiles in the fuel reactor. The combination of both strategies has high potential to maximize the coal combustion via iG-CLC process., This work was partially supported by the Ministerio de Economía y Competitividad (project ENE2014-56857-R), and by the projects ENE2016-77982 (AEI/FEDER, UE), and ENE2017-89473-R (AEI/FEDER, UE), by the Regional Aragon Government via the T05_17R research group funding and by the Consejo Superior de Investigaciones Científicas (CSIC project: 2017-80E035). T. Mendiara thanks for the “Ramón y Cajal” post-doctoral contract awarded by MINECO., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Improving the oxygen demand in biomass CLC using manganese ores

  • Pérez-Astray, Antón
  • Mendiara, Teresa
  • Diego Poza, Luis F. de
  • Abad Secades, Alberto
  • García Labiano, Francisco
  • Izquierdo Pantoja, María Teresa
  • Adánez Elorza, Juan
11 Figures, 5 Tables.--© 2020. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Negative Emission Technologies (NETs) should be implemented to reach the objectives set by the Paris Agreement to limit the average temperature increment to 2 °C. One of the options is the development of bioenergy with Carbon Capture and Storage (BECCS) technologies. In this sense, Chemical Looping Combustion (CLC) is one of the most efficient CO2 Capture technologies both from economical and energy points of view. In CLC, a solid oxygen carrier is used to transfer the oxygen from air to the fuel. In this work two manganese-based ores were used as oxygen carriers to burn three different types of biomass (pine sawdust and two Spanish agricultural residues) in a 0.5 kWth CLC continuous unit. Operational conditions were varied to evaluate their effect on the CO2 capture efficiency and the total oxygen demand of the process. Almost 100% of CO2 capture efficiency was reached working with pine sawdust as well as with almond shells. However, high values of total oxygen demand (10–20%) were found, which led to consider further technological solutions to increase the combustion efficiency. In this respect, fuel reactor outlet recycling was evaluated as an operational solution to reduce the oxygen demand with good results (about 30% reduction in the total oxygen demand value). NOx and tar formation from the CLC system were also evaluated. There were no NOx emissions during the experimental campaign and low tar content in the fuel reactor outlet gas was reached (0.3–3.2 g/Nm3), being naphthalene the major tar compound., This work was supported by ENE2017-89473-R AEI/FEDER, UE. A. Pérez-Astray thanks the Spanish Ministry of Economy and Competitiveness (MINECO) for the BES-2015-074651 pre-doctoral fellowship co-financed by the European Social Fund. T. Mendiara thanks for the “Ramón y Cajal” post-doctoral contract awarded by MINECO., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

CO2 capture by Chemical Looping Processes using C-fuels

  • García Labiano, Francisco
  • Izquierdo Pantoja, María Teresa
  • Diego Poza, Luis F. de
  • Gayán Sanz, Pilar
  • Abad Secades, Alberto
  • Mendiara, Teresa
  • Adánez Elorza, Juan
1 figure.-- Work presented at the Carbon 2018 ´"The World Conference of Carbon", Madrid (Spain), 01st-6th July, According to the IPCC, warming of the climate system is unequivocal and this is mainly consequence of the increase in the CO2 concentration in the atmosphere. In addition, “Human influence on the climate system is clear, and recent anthropogenic emissions of greenhouse gases are the highest in history”. These emissions are mainly consequence of the burning of C-fuels, mostly fossil fuels, which result in a net increase in carbon concentration in the atmosphere, soil and oceans. In fact, the natural carbon cycle in the earth is being affected. Limiting climate change would require substantial and sustained reductions in greenhouse gas emissions. The measures considered for the reduction of CO2 emissions to the atmosphere include the improvement in the use and generation of energy, the use of nuclear energy, the boost of energy generation from renewable sources and the CO2 capture and storage (CCS)., This work was supported by the Spanish Ministry of Economy, Industry and Competitiveness (projects ENE2014-56857-R, ENE2016-77982-R, and ENE2017-89473-R), by the European Regional Development Fund (ERDF), by the CSIC (201780E035), and by the Government of Aragón. T. Mendiara thanks for the “Ramón y Cajal” post-doctoral contract awarded by MINEICO.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Comparative Evaluation of the Performance of Coal Combustion in 0.5 and 50 kWth Chemical Looping Combustion Units with Ilmenite, Redmud or Iron Ore as Oxygen Carrier

  • Abad, A.
  • Mendiara, T.
  • Gayán, P.
  • García-Labiano, F.
  • De Diego, L.F.
  • Bueno, J.A.
  • Pérez-Vega, R.
  • Adánez, J.
Chemical Looping Combustion (CLC) is one of the most promising technologies to achieve the CO2 capture at a low economic and energetic penalty. In CLC the combustion is split in two steps: fuel combustion assisted by an oxygen carrier in the fuel reactor, and oxygen carrier regeneration in the air reactor by oxygen in air. Usually, the air and fuel reactors are interconnected fluidized beds, with the oxygen carrier circulating between them. Thus, the CO2 capture is inherent to the CLC process. The use of solid fuels in CLC is attracting great attention due to coal is the most abundant fuel, and burning biomass with CO2 capture would allow to reduce the atmospheric CO2 concentration. The in situ Gasification CLC (iG-CLC) allows the conversion of the solid fuel by performing both gasification and combustion of gasification products in the fuel reactor. In iG-CLC complete combustion is not reached, and an oxygen polishing step is required downstream by using a small fraction of pure oxygen. In this work, an overview of the operational experience in ICB-CSIC is presented. Results obtained in 0.5 kWth and 50 kWth CLC units burning different coals with ilmenite, redmud or iron ore are compiled and critically compared. Insights were obtained in order to achieve high CO2 capture and combustion efficiency values. Eventually, the use of ring-type internals in the fuel reactor of the 50 kWth CLC unit was accomplished to promote the gas-solid contact, thus increasing the combustion efficiency.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Combustion and Reforming of Liquid Fossil Fuels through Chemical Looping Processes: Integration of Chemical Looping Processes in a Refinery

  • García-Labiano, F.
  • De Diego, L.F.
  • García-Díez, E.
  • Serrano, A.
  • Abad, A.
  • Gayán, P.
  • Adánez, J.
Oil refining processes demand and use vast quantities of energy and thus are responsible for the emission of a great deal of CO2. In addition, hydrogen is used in oil refineries for hydrodesulfurization and hydrocraking processes. In this sense, the integration of Chemical Looping technology in an oil refinery using vacuum residues as fuel could drive to significant reductions in CO2 emissions. In this work, Chemical Looping Combustion (CLC) and Chemical Looping Reforming (CLR) experiments have been carried out in a continuously operated 1 kWth unit using a Cu- and Ni-based oxygen carrier, respectively. Diesel, synthetic and mineral lubricant oil were used as fuels as a previous step to the use of low grade residues. Regarding Chemical Looping Combustion conditions, almost 100% of combustion efficiency and full carbon capture were obtained at low oxygen carrier-to-fuel molar ratios (ø=1.6). Regarding Chemical Looping Reforming conditions, a syngas containing a H2 concentration over 50 vol.% in dry basis was obtained with the additional advantage of reaching 100% CO2 capture efficiency in the process. In all cases, syngas composition obtained was close to the given by the thermodynamic equilibrium. These results provide a basis for concluding that the integration of Chemical Looping processes for heat/steam and hydrogen production in an oil refinery is feasible and could lead to significant environmental advantages.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Chemical Looping Combustion of Biomass: An Approach to BECCS

  • Mendiara, T.
  • Gayán, P.
  • García-Labiano, F.
  • De Diego, L.F.
  • Pérez-Astray, A.
  • Izquierdo, M.T.
  • Abad, A.
  • Adánez, J.
The climate change challenge demands a commitment of combined strategies between global institutions, governments, companies and citizens. In order to reach 2015 Paris Agreement, greenhouse gas emissions need to be reduced. Any single technology is currently able to achieve atmospheric greenhouse concentration values for the purpose of climate change mitigation. Also carbon sinks will be needed to further this cause as well as Carbon Capture and Storage (CCS) technologies. In this sense, biomass represents an interesting alternative fuel for heat and power production as a carbon dioxide-neutral fuel. Moreover, if the CO2 generated during biomass combustion process was captured then negative-CO2 emissions would be reached. In this way, Bio-Energy with Carbon Capture and Storage (BECCS) technologies enable energy generation while CO2 is being removed from the atmosphere. Among the different options, Chemical Looping Combustion (CLC) is considered one of the most promising second generation CCS technologies due to its negligible energy and cost penalty for CO2 capture. In this work, three types of biomass were evaluated under CLC conditions: pine sawdust, olive stone and almond shell. Combustion experiments were performed in a continuous 500 Wth CLC unit at Instituto de Carboquímica (ICB-CSIC, Spain) using a highly-reactive low-cost iron ore as oxygen carrier (Tierga ore). During the experimental campaign, the effect of fuel reactor temperature (900-980 °C) on the combustion performance was analyzed. At the highest temperature tested (980 °C) a CO2 capture efficiency of 100% was reached with all the biomasses. However, the total oxygen demand followed no clear trend with temperature and the average value was close to 25%. The high volatile content of biomass compared to coal contributed to this effect. For a correct operation with biomass, further design measures should be taken to reduce the amount of unburned compounds at the outlet of the fuel reactor. In addition, tar and NOx measurements were done. No relevant drawbacks by the use of biomass in CLC were found related with other pollutants present in the system such as tar production or NOx emissions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

CLOU process performance with a Cu-Mn oxygen carrier in the combustion of different types of coal with CO2 capture

  • Adanez-Rubio, I.
  • Abad, A.
  • Gayan, P.
  • de Diego, L.F.
  • Adanez, J.
The Chemical Looping with Oxygen Uncoupling (CLOU) process is a Chemical Looping Combustion (CLC) technology that allows the combustion of solid fuels with inherent CO2 separation by using oxygen carriers based on metal oxides. This technology has a low energy penalty and thus low CO2 capture costs. The oxygen carrier used in the CLOU process must be able to release gaseous oxygen, an aspect that limits the availability of metal oxides for this process. This work investigated the suitability of an oxygen carrier containing 34 wt% CuO and 66 wt% Mn-3 O-4 (active phase Cu1.5Mn1.5O4) prepared by granulation regarding the CO2 capture, combustion efficiency and lifetime of the particles. The effect of the different types of coal (two sub-bituminous and a lignite) on combustion and CO2 capture efficiencies by CLOU was studied at different oxygen carrier to coal ratios in a continuous 1.5 kWth rig. It was found that full combustion could be reached regardless of the coal used. However, CO2 capture efficiencies were highly determined by coal rank. Finally, it was found that working with oxygen carrier to coal ratios higher than phi = 4, which corresponded to values of the variation of the oxygen carrier conversion lower than Delta X-oc = 0.25, decreased the effect of chemical stress on the attrition rate. Therefore, it is clearly beneficial for the lifetime of oxygen carrier particles to operate with low variations of the oxygen carrier conversion (Delta X-oc) between fuel and air reactors.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Titanium substituted manganese-ferrite as an oxygen carrier with permanent magnetic properties for chemical looping combustion of solid fuels

  • Abián, María
  • Abad, Alberto
  • Izquierdo, María T.
  • Gayán, Pilar
  • de Diego, Luis F.
  • García-Labiano, Francisco
  • Adánez, Juan
Mixed oxides of Mn-Fe have been identified as suitable materials for Chemical Looping Combustion (CLC) with solid fuels both via in-situ Gasification Chemical Looping Combustion (iG-CLC) and Chemical Looping with Oxygen Uncoupling (CLOU) processes. These materials show the property of react with gaseous fuels as well as release oxygen under given conditions, while cheap metals are used. In addition, these materials can show magnetic properties that can be used for an easy separation from ash in CLC with solid fuels. Thus, losses of oxygen carrier material in the ash drain stream would be reduced. Different cations have been proposed for improving the magnetic properties of manganese ferrites, including Ti4+. In this context, the present work accomplishes a screening of (MnxFe1-x)2O3 doped with 7 wt.% TiO2, with x ranging from 0 to 1. The influence of Mn:Fe ratio on their physical and chemical properties was evaluated. In general, particles with high crushing strength values (>4 N) were obtained, and magnetic characteristics were highlighted when x ¿ 0.66. The oxygen uncoupling capability depended on the Mn:Fe ratio and the oxidation conditions, i.e. temperature and oxygen partial pressure. Broader oxidation conditions to take advantage of the oxygen uncoupling capability were found for materials with low Mn content. On contrary, the reactivity with fuel gases (CH4, H2 and CO) increased with the Mn content. Thus, oxygen carriers with Mn/(Mn + Fe) molar ratio in the 0.5–0.9 interval showed interesting properties at suitable temperatures for the iG-CLC and CLOU processes (i.e. 850–980 °C). The material with Mn/(Mn + Fe) = 0.55 was preferred considering a trade-off between reactivity and magnetic properties.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Chemical looping with oxygen uncoupling: an advanced biomass combustion technology to avoid CO2 emissions

  • Adánez-Rubio, I.
  • Pérez-Astray, A.
  • Abad, A.
  • Gayán, P.
  • De Diego, L.F.
  • Adánez, J.
Bioenergy with carbon dioxide (CO2) capture and storage (BECCS) technologies represent an interesting option to reach negative carbon emissions, which implies the removal of CO2 already emitted to the atmosphere. Chemical looping combustion (CLC) with biomass can be considered as a promising BECCS technology since CLC has low cost and energy penalty. In CLC, the oxygen needed for combustion is supplied by a solid oxygen carrier circulating between the fuel and air reactors. In the fuel reactor, the fuel is oxidized producing a CO2-concentrated stream while the oxygen carrier is reduced. In the air reactor, the oxygen carrier is regenerated with air. Chemical looping with oxygen uncoupling (CLOU) is a CLC technology that allows the combustion of solid fuels as in common combustion with air by means of an oxygen carrier that release gaseous oxygen in the fuel reactor. In the last years, several Cu-based, Mn-based, and mixed oxide oxygen (O2) carriers have been tested showing good CLOU properties. Among them, copper (Cu)-based and Cu-Manganese (Mn) mixed oxides showed high reactivity, O2 release rate, and high O2 equilibrium concentration. The aim of this work is to study the viability of biomass combustion by CLOU process. The combustion of three types of biomass (pine sawdust, olive stone, and almond shell) were studied in a continuous 1.5 kWth CLC unit. Two O2 carriers were tested: a Cu-based oxygen carrier with Magnesium, Aluminum, Oxgen (MgAl2O4) as an inert prepared by spray drying (Cu60MgAl) and a mixed Cu-Mn oxide prepared by spray granulation (Cu34Mn66). These materials are capable of releasing gaseous oxygen when they are reduced in a different range of temperatures. CO2 capture and combustion efficiency were evaluated. Two fuel reactor operation temperatures were used: 775–850 °C for Cu34Mn66 and 900–935 °C for Cu60MgAl. High CO2 capture efficiencies and 100% combustion efficiency were reached with both oxygen carriers and with all the biomasses tested. Therefore, the CLOU technology with the Cu- and Cu-Mn-based oxygen carriers allowed avoiding CO2 emissions maintaining high combustion efficiencies. Results obtained demonstrate that this innovative biomass combustion technology combined with carbon storage lets an efficient BECCS process implementation.